Search Results

Search found 46413 results on 1857 pages for 'system speech recognition'.

Page 797/1857 | < Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >

• Easy Made Easier - Networking

  - by dragonfly

      In my last post, I highlighted the feature of the Appliance Manager Configurator to auto-fill some fields based on previous field values, including host names based on System Name and sequential IP addresses from the first IP address entered. This can make configuration a little faster and a little less subject to data entry errors, particularly if you are doing the configuration on the Oracle Database Appliance itself.     The Oracle Database Appliance Appliance Manager Configurator is available for download here. But why would you download it, if it comes pre-installed on the Oracle Database Appliance? A common reason for customers interested in this new Engineered System is to get a good idea of how easy it is to configure. Beyond that, you can save the resulting configuration as a file, and use it on an Oracle Database Appliance. This allows you to verify the data entered in advance, and in the comfort of your office. In addition, the topic of this post is another strong reason to download and use the Appliance Manager Configurator prior to deploying your Oracle Database Appliance.     The most common source of hiccups in deploying an Oracle Database Appliance, based on my experiences with a variety of customers, involves the network configuration. It is during Step 11, when network validation occurs, that these come to light, which is almost half way through the 24 total steps, and can be frustrating, whether it was a typo, DNS mis-configuration or IP address already in use. This is why I recommend as a best practice taking advantage of the Appliance Manager Configurator prior to deploying an Oracle Database Appliance.     Why? Not only do you get the benefit of being able to double check your entries before you even start on the Oracle Database Appliance, you can also take advantage of the Network Validation step. This is the final step before you review all the data and can save it to a text file. It can be skipped, if you aren't ready or are not connected to the network that the Oracle Database Appliance will be on. My recommendation, though, is to run the Appliance Manager Configurator on your laptop, enter the data or re-load a previously saved file of the data, and then connect to the network that the Oracle Database Appliance will be on. Now run the Network Validation. It will check to make sure that the host names you entered are in DNS and do resolve to the IP addresses you specifiied. It will also ping the IP Addresses you specified, so that you can verify that no other machine is already using them (yes, that has happened at customer sites).     After you have completed the validation, as seen in the screen shot below, you can review the results and move on to saving your settings to a file for use on your Oracle Database Appliance, or if there are errors, you can use the Back button to return to the appropriate screen and correct the data. Once you are satisfied with the Network Validation, just check the Skip/Ignore Network Validation checkbox at the top of the screen, then click Next. Is the Network Validation in the Appliance Manager Configurator required? No, but it can save you time later. I should also note that the Network Validation screen is not part of the Appliance Manager Configurator that currently ships on the Oracle Database Appliance, so this is the easiest way to verify your network configuration.     I hope you are finding this series of posts useful. My next post will cover some aspects of the windowing environment that gets run by the 'startx' command on the Oracle Database Appliance, since this is needed to run the Appliance Manager Configurator via a direct connected monitor, keyboard and mouse, or via the ILOM. If it's been a while since you've used an OpenWindows environment, you'll want to check it out.

  Read the article

• Grub2 : Windows 7 can't boot installing with Ubuntu 10.04 on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. ================ fdisk -l ================================ dellph1@dellph1-desktop:~$ fdisk -l omitting empty partition (5) Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00087dec Device Boot Start End Blocks Id System /dev/sda1 * 1 23104 185582848+ 7 HPFS/NTFS /dev/sda2 23105 121601 791177122 5 Extended /dev/sda5 36107 74408 307660783+ 7 HPFS/NTFS /dev/sda6 74409 100081 206218341 7 HPFS/NTFS /dev/sda7 100082 121601 172859368+ 7 HPFS/NTFS Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6d43dfb2 Device Boot Start End Blocks Id System /dev/sdb1 1 10030 80560066 5 Extended /dev/sdb5 * 1 5560 44657601 83 Linux /dev/sdb6 5560 9387 30736384 83 Linux /dev/sdb7 9387 10030 5164032 82 Linux swap / Solaris dellph1@dellph1-desktop:~$ ================= grub.cfg ================== # DO NOT EDIT THIS FILE # It is automatically generated by /usr/sbin/grub-mkconfig using templates from /etc/grub.d and settings from /etc/default/grub # BEGIN /etc/grub.d/00_header if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=5 fi END /etc/grub.d/00_header BEGIN /etc/grub.d/05_debian_theme insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 insmod jpeg if background_image /usr/share/backgrounds/CurlsbyCandy.jpg ; then set color_normal=white/black set color_highlight=black/light-gray else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi END /etc/grub.d/05_debian_theme BEGIN /etc/grub.d/10_linux menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 linux /boot/vmlinuz-2.6.32-24-generic root=UUID=2f014a3a-35f3-4d05-87aa-34ca677160b7 ro splash vga=795 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap initrd /boot/initrd.img-2.6.32-24-generic } menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 echo 'Loading Linux 2.6.32-24-generic ...' linux /boot/vmlinuz-2.6.32-24-generic root=UUID=2f014a3a-35f3-4d05-87aa-34ca677160b7 ro single splash vga=795 echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-24-generic } END /etc/grub.d/10_linux BEGIN /etc/grub.d/30_os-prober menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod ntfs set root='(hd0,1)' search --no-floppy --fs-uuid --set 5cac2139ac210f58 chainloader +1 } END /etc/grub.d/30_os-prober BEGIN /etc/grub.d/40_multisystem Ajout de MultiSystem MULTISYSTEM MENU menuentry "PLoP Boot Manager" { linux16 /boot/plpbt } menuentry "Smart Boot Manager" { search --set -f /boot/sbootmgr.dsk linux16 /boot/memdisk initrd16 /boot/sbootmgr.dsk } FIN MULTISYSTEM MENU END /etc/grub.d/40_multisystem ================================================ I want to keep the Grub on the second HDD. I have been using the Startup Manager, Boot Manager and Grub Customizer, and this problem still unsolved. The easiest thing that I can possibly do is to install Grub on first HDD, but I was curious and maybe someone can help.

  Read the article

• No external microphone Acer AO722

  - by Leeghwater

  The ACER AO722 comes with an external mic input, and this input is not recognised by Alsa mixer or Sound (in System Settings). There are various comments on this problem, but no real solutions. For example External Mic not working but Internal Mic works on an Acer Aspiron AO722. Using the internal mic is not an option, as I need to use skype professionally. I have tried everything in alsamixer (accessible through the Terminal Ctrl+Alt+t, command: alsamixer), and in Sound (under System Settings). I have also installed Pulseaudio. But to no avail. The headset is working normally under Skype in Windows. My AO722 came with Windows 7 on it, so I have installed Skype there too. My headset has separate connectors for ears and mic, and these go into the respective output and input on the right side of the laptop. This location: http://bernaerts.dyndns.org/linux/202-ubuntu-acer-ao722 sounds like an effective solution but it is for Ubuntu Natty 11.04. The solution suggested sounds drastic to me: replace the kernel 2.6.38-13 with version 2.6.38-12. I use Ubuntu 12.04, and my kernel is 3.2.0-30-generic-pae. Question: could I try this solution with Ubuntu 12.04? Is this a risky thing to do? I have found harware work around this problem. The audio output seems to be a combi output with also a microphone connection. I have made an adapter for this output. I used a 4 contacts 3,5 mm audio jack plug. To this plug I have soldered 2 female (common stereo) connectors, one for ears and one for the mic of my headset. The 4 contacts jack, which goes into the laptop (in audio OUTput) is wired as follows: tip = hot audio right; first sleeve after tip = hot audio left; second sleeve = common earth (for both ears and microphone); the 3rd sleeve = microphone signal input. In the connector which I could buy, the 3rd sleeve is not so much a sleeve, but part of the metal base of the connector; normally you would expect this one to be connect to earth. But connecting the mic signal to it works. Maybe ready made adapters of this kind and even headsets with a combi jack can simply be purchased; I didn't check. When I plug in the 4 contacts jack, Sound and Alsamixer immediately recognise an external microphone (even if no mic is connected to the adapter). In Sound, under the Input tab, 'Settings for internal microphone' changes into 'Setting for microphone'. The microphone comes through loud and clear, however there is a constant noise in the background. Others have reported this too. If I disconnect the external mic from the adapter, or shortcircuit the external microphone, the noise gets less but does not disappear. Therefore, it is not background noise from the room, but it comes from the computer itself. However, if you talk directly in the microphone of the headset, the noise level is acceptable for VOIP. The headset of my mobile phone Nokia C1 mobile comes wwith a 4 contacts combi 3,5mm jack plug. However, this one works (ear and mic) with the AO722 only if not inserted fully. Possibly the wiring of this headset jack is different. I cannot find detailed specs of the AO722, and don't know whether the audio 'output' was actually designed as a combi input/output. I have seen that at least one other AO model has a combi connector only. In any case, I do not believe that connecting your headset in this way will harm your computer. I would still appreciate a software solution. This must be possible, because the proper microphone input connector works under MS Windows.

  Read the article

• Velocity collision detection (2D)

  - by ultifinitus

  Alright, so I have made a simple game engine (see youtube) And my current implementation of collision resolution has a slight problem, involving the velocity of a platform. Basically I run through all of the objects necessary to detect collisions on and resolve those collisions as I find them. Part of that resolution is setting the player's velocity = the platform's velocity. Which works great! Unless I have a row of platforms moving at different velocities or a platform between a stack of tiles.... (current system) bool player::handle_collisions() { collisions tcol; bool did_handle = false; bool thisObjectHandle = false; for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(prevPos.x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.y >= collideQueue[temp]->get_prev_pos().y + collideQueue[temp]->get_img()->get_height()) if (tcol.top > 0) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.y + get_img()->get_height() <= collideQueue[temp]->get_prev_pos().y) if (tcol.bottom > 0) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x/*collideQueue[temp]->get_vel().x*/,collideQueue[temp]->get_vel().y); ableToJump = true; jumpTimes = maxjumpable; thisObjectHandle = did_handle = true; } /// /// ADD CODE FROM NEXT CODE BLOCK HERE (on forum, not in code) /// } for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.x + get_img()->get_width() <= collideQueue[temp]->get_prev_pos().x) if (tcol.left > 0) { add_pos(-tcol.left,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.x >= collideQueue[temp]->get_prev_pos().x + collideQueue[temp]->get_img()->get_width()) if (tcol.right > 0) { add_pos(tcol.right,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } } return did_handle; } (if I add the following code {where the comment to do so is}, which is glitchy, the above problem doesn't happen, though it brings others) if (!thisObjectHandle) { if (tcol.bottom > tcol.top) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } else if (tcol.top > tcol.bottom) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } } How would you change my system to prevent this?

  Read the article

• Non-blocking I/O using Servlet 3.1: Scalable applications using Java EE 7 (TOTD #188)

  - by arungupta

  Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. In a typical application, ServletInputStream is read in a while loop. public class TestServlet extends HttpServlet {    protected void doGet(HttpServletRequest request, HttpServletResponse response)         throws IOException, ServletException {     ServletInputStream input = request.getInputStream();       byte[] b = new byte[1024];       int len = -1;       while ((len = input.read(b)) != -1) {          . . .        }   }} If the incoming data is blocking or streamed slower than the server can read then the server thread is waiting for that data. The same can happen if the data is written to ServletOutputStream. This is resolved in Servet 3.1 (JSR 340, to be released as part Java EE 7) by adding event listeners - ReadListener and WriteListener interfaces. These are then registered using ServletInputStream.setReadListener and ServletOutputStream.setWriteListener. The listeners have callback methods that are invoked when the content is available to be read or can be written without blocking. The updated doGet in our case will look like: AsyncContext context = request.startAsync();ServletInputStream input = request.getInputStream();input.setReadListener(new MyReadListener(input, context)); Invoking setXXXListener methods indicate that non-blocking I/O is used instead of the traditional I/O. At most one ReadListener can be registered on ServletIntputStream and similarly at most one WriteListener can be registered on ServletOutputStream. ServletInputStream.isReady and ServletInputStream.isFinished are new methods to check the status of non-blocking I/O read. ServletOutputStream.canWrite is a new method to check if data can be written without blocking.  MyReadListener implementation looks like: @Overridepublic void onDataAvailable() { try { StringBuilder sb = new StringBuilder(); int len = -1; byte b[] = new byte[1024]; while (input.isReady() && (len = input.read(b)) != -1) { String data = new String(b, 0, len); System.out.println("--> " + data); } } catch (IOException ex) { Logger.getLogger(MyReadListener.class.getName()).log(Level.SEVERE, null, ex); }}@Overridepublic void onAllDataRead() { System.out.println("onAllDataRead"); context.complete();}@Overridepublic void onError(Throwable t) { t.printStackTrace(); context.complete();} This implementation has three callbacks: onDataAvailable callback method is called whenever data can be read without blocking onAllDataRead callback method is invoked data for the current request is completely read. onError callback is invoked if there is an error processing the request. Notice, context.complete() is called in onAllDataRead and onError to signal the completion of data read. For now, the first chunk of available data need to be read in the doGet or service method of the Servlet. Rest of the data can be read in a non-blocking way using ReadListener after that. This is going to get cleaned up where all data read can happen in ReadListener only. The sample explained above can be downloaded from here and works with GlassFish 4.0 build 64 and onwards. The slides and a complete re-run of What's new in Servlet 3.1: An Overview session at JavaOne is available here. Here are some more references for you: Java EE 7 Specification Status Servlet Specification Project JSR Expert Group Discussion Archive Servlet 3.1 Javadocs

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for October 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." -- Irving Wladawsky-Berger Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen (Vennster) discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what's truly valuable. ADF Mobile Custom Javascript — iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article) Thought for the Day "I will contend that conceptual integrity is the most important consideration in system design. It is better to have a system omit certain anomalous features and improvements, but to reflect one set of design ideas, than to have one that contains many good but independent and uncoordinated ideas." — Frederick P. Brooks Source: SoftwareQuotes.com

  Read the article

• LUKOIL Overseas Holding Optimizes Oil Field Development Projects with Integrated Project Management

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} LUKOIL Overseas Group is a growing oil and gas company that is an integral part of the vertically integrated oil company OAO LUKOIL. It is engaged in the exploration, acquisition, integration, and efficient development of oil and gas fields outside the Russian Federation to promote transforming LUKOIL into a transnational energy company. In 2010, the company signed a 20-year development project for the giant, West Qurna 2 oil field in Iraq. Executing 10,000 to 15,000 project activities simultaneously on 14 major construction and drilling projects in Iraq for the West Qurna-2 project meant the company needed a clear picture, in real time, of dependencies between its capital construction, geologic exploration and sinking projects—required for its building infrastructure oil field development projects in Iraq. LUKOIL Overseas Holding deployed Oracle’s Primavera P6 Enterprise Project Portfolio Management to generate structured project management information and optimize planning, monitoring, and analysis of all engineering and commercial activities—such as tenders, and bulk procurement of materials and equipment—related to oil field development projects. A word from LUKOIL Overseas Holding Ltd. “Previously, we created project schedules on desktop computers and uploaded them to the project server to be merged into one big file for each project participant to access. This was not scalable, as we’ve grown and now run up to 15,000 activities in numerous projects and subprojects at any time. With Oracle’s Primavera P6 Enterprise Project Portfolio Management, we can now work concurrently on projects with many team members, enjoy absolute security, and issue new baselines for all projects and project participants once a week, with ease.” – Sergey Kotov, Head of IT and the Communication Office, LUKOIL Mid-East Ltd. Oracle Primavera Solutions: · Facilitated managing dependencies between projects by enabling the general scheduler to reschedule all projects and subprojects once a week, realigning 10,000 to 15,000 project activities that the company runs at any time · Replaced Microsoft Project and a paper-based system with a complete solution that provides structured project data · Enhanced data security by establishing project management security policies that enable only authorized project members to edit their project tasks, while enabling each project participant to view all project data that are relevant to that individual’s task · Enabled the company to monitor project progress in comparison to the projected plan, based on physical project assets to determine if each project is on track to conclude within its time and budget limitations To view the full list of solutions view here. “Oracle Gold Partner Parma Telecom was key to our successful Primavera deployment, implementing the software’s basic functionalities, such as project content, timeframes management, and cost management, in addition to performing its integration with our enterprise resource planning system and intranet portal within ten months and in accordance with budgets,” said Rafik Baynazarov, head of the master planning and control office, LUKOIL Mid-East Ltd. “ To read the full version of the customer success story, please view here.

  Read the article

• XNA Multiplayer Games and Networking

  - by JoshReuben

  ·        XNA communication must by default be lightweight – if you are syncing game state between players from the Game.Update method, you must minimize traffic. That game loop may be firing 60 times a second and player 5 needs to know if his tank has collided with any player 3 and the angle of that gun turret. There are no WCF ServiceContract / DataContract niceties here, but at the same time the XNA networking stack simplifies the details. The payload must be simplistic - just an ordered set of numbers that you would map to meaningful enum values upon deserialization.   Overview ·        XNA allows you to create and join multiplayer game sessions, to manage game state across clients, and to interact with the friends list ·        Dependency on Gamer Services - to receive notifications such as sign-in status changes and game invitations ·        two types of online multiplayer games: system link game sessions (LAN) and LIVE sessions (WAN). ·        Minimum dev requirements: 1 Xbox 360 console + Creators Club membership to test network code - run 1 instance of game on Xbox 360, and 1 on a Windows-based computer   Network Sessions ·        A network session is made up of players in a game + up to 8 arbitrary integer properties describing the session ·        create custom enums – (e.g. GameMode, SkillLevel) as keys in NetworkSessionProperties collection ·        Player state: lobby, in-play   Session Types ·        local session - for split-screen gaming - requires no network traffic. ·        system link session - connects multiple gaming machines over a local subnet. ·        Xbox LIVE multiplayer session - occurs on the Internet. Ranked or unranked   Session Updates ·        NetworkSession class Update method - must be called once per frame. ·        performs the following actions: o   Sends the network packets. o   Changes the session state. o   Raises the managed events for any significant state changes. o   Returns the incoming packet data. ·        synchronize the session à packet-received and state-change events à no threading issues   Session Config ·        Session host - gaming machine that creates the session. XNA handles host migration ·        NetworkSession properties: AllowJoinInProgress , AllowHostMigration ·        NetworkSession groups: AllGamers, LocalGamers, RemoteGamers   Subscribe to NetworkSession events ·        GamerJoined ·        GamerLeft ·        GameStarted ·        GameEnded – use to return to lobby ·        SessionEnded – use to return to title screen   Create a Session session = NetworkSession.Create(         NetworkSessionType.SystemLink,         maximumLocalPlayers,         maximumGamers,         privateGamerSlots,         sessionProperties );   Start a Session if (session.IsHost) {     if (session.IsEveryoneReady)     {        session.StartGame();        foreach (var gamer in SignedInGamer.SignedInGamers)        {             gamer.Presence.PresenceMode =                 GamerPresenceMode.InCombat;   Find a Network Session AvailableNetworkSessionCollection availableSessions = NetworkSession.Find(     NetworkSessionType.SystemLink,       maximumLocalPlayers,     networkSessionProperties); availableSessions.AllowJoinInProgress = true;   Join a Network Session NetworkSession session = NetworkSession.Join(     availableSessions[selectedSessionIndex]);   Sending Network Data var packetWriter = new PacketWriter(); foreach (LocalNetworkGamer gamer in session.LocalGamers) {     // Get the tank associated with this player.     Tank myTank = gamer.Tag as Tank;     // Write the data.     packetWriter.Write(myTank.Position);     packetWriter.Write(myTank.TankRotation);     packetWriter.Write(myTank.TurretRotation);     packetWriter.Write(myTank.IsFiring);     packetWriter.Write(myTank.Health);       // Send it to everyone.     gamer.SendData(packetWriter, SendDataOptions.None);     }   Receiving Network Data foreach (LocalNetworkGamer gamer in session.LocalGamers) {     // Keep reading while packets are available.     while (gamer.IsDataAvailable)     {         NetworkGamer sender;          // Read a single packet.         gamer.ReceiveData(packetReader, out sender);          if (!sender.IsLocal)         {             // Get the tank associated with this packet.             Tank remoteTank = sender.Tag as Tank;              // Read the data and apply it to the tank.             remoteTank.Position = packetReader.ReadVector2();             …   End a Session if (session.AllGamers.Count == 1)         {             session.EndGame();             session.Update();         }   Performance •        Aim to minimize payload, reliable in order messages •        Send Data Options: o   Unreliable, out of order -(SendDataOptions.None) o   Unreliable, in order (SendDataOptions.InOrder) o   Reliable, out of order (SendDataOptions.Reliable) o   Reliable, in order (SendDataOptions.ReliableInOrder) o   Chat data (SendDataOptions.Chat) •        Simulate: NetworkSession.SimulatedLatency , NetworkSession.SimulatedPacketLoss •        Voice support – NetworkGamer properties: HasVoice ,IsTalking , IsMutedByLocalUser

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• What common interface would be appropriate for these game object classes?

  - by Jefffrey

  Question A component based system's goal is to solve the problems that derives from inheritance: for example the fact that some parts of the code (that are called components) are reused by very different classes that, hypothetically, would lie in a very different branch of the inheritance tree. That's a very nice concept, but I've found out that CBS is often hard to accomplish without using ugly hacks. Implementations of this system are often far from clean. But I don't want to discuss this any further. My question is: how can I solve the same problems a CBS try to solve with a very clean interface? (possibly with examples, there are a lot of abstract talks about the "perfect" design already). Context Here's an example I was going for before realizing I was just reinventing inheritance again: class Human { public: Position position; Movement movement; Sprite sprite; // other human specific components }; class Zombie { Position position; Movement movement; Sprite sprite; // other zombie specific components }; After writing that I realized I needed an interface, otherwise I would have needed N containers for N different types of objects (or to use boost::variant to gather them all together). So I've thought of polymorphism (move what systems do in a CBS design into class specific functions): class Entity { public: virtual void on_event(Event) {} // not pure virtual on purpose virtual void on_update(World) {} virtual void on_draw(Window) {} }; class Human : public Entity { private: Position position; Movement movement; Sprite sprite; public: virtual void on_event(Event) { ... } virtual void on_update(World) { ... } virtual void on_draw(Window) { ... } }; class Zombie : public Entity { private: Position position; Movement movement; Sprite sprite; public: virtual void on_event(Event) { ... } virtual void on_update(World) { ... } virtual void on_draw(Window) { ... } }; Which was nice, except for the fact that now the outside world would not even be able to know where a Human is positioned (it does not have access to its position member). That would be useful to track the player position for collision detection or if on_update the Zombie would want to track down its nearest human to move towards him. So I added const Position& get_position() const; to both the Zombie and Human classes. And then I realized that both functionality were shared, so it should have gone to the common base class: Entity. Do you notice anything? Yes, with that methodology I would have a god Entity class full of common functionality (which is the thing I was trying to avoid in the first place). Meaning of "hacks" in the implementation I'm referring to I'm talking about the implementations that defines Entities as simple IDs to which components are dynamically attached. Their implementation can vary from C-stylish: int last_id; Position* positions[MAX_ENTITIES]; Movement* movements[MAX_ENTITIES]; Where positions[i], movements[i], component[i], ... make up the entity. Or to more C++-style: int last_id; std::map<int, Position> positions; std::map<int, Movement> movements; From which systems can detect if an entity/id can have attached components.

  Read the article

• The battle between Java vs. C#

  The battle between Java vs. C# has been a big debate amongst the development community over the last few years. Both languages have specific pros and cons based on the needs of a particular project. In general both languages utilize a similar coding syntax that is based on C++, and offer developers similar functionality. This being said, the communities supporting each of these languages are very different. The divide amongst the communities is much like the political divide in America, where the Java community would represent the Democrats and the .Net community would represent the Republicans. The Democratic Party is a proponent of the working class and the general population. Currently, Java is deeply entrenched in the open source community that is distributed freely to anyone who has an interest in using it. Open source communities rely on developers to keep it alive by constantly contributing code to make applications better; essentially they develop code by the community. This is in stark contrast to the C# community that is typically a pay to play community meaning that you must pay for code that you want to use because it is developed as products to be marketed and sold for a profit. This ties back into my reference to the Republicans because they typically represent the needs of business and personal responsibility. This is emphasized by the belief that code is a commodity and that it can be sold for a profit which is in direct conflict to the laissez-faire beliefs of the open source community. Beyond the general differences between Java and C#, they also target two different environments. Java is developed to be environment independent and only requires that users have a Java virtual machine running in order for the java code to execute. C# on the other hand typically targets any system running a windows operating system and has the appropriate version of the .Net Framework installed. However, recently there has been push by a segment of the Open source community based around the Mono project that lets C# code run on other non-windows operating systems. In addition, another feature of C# is that it compiles into an intermediate language, and this is what is executed when the program runs. Because C# is reduced down to an intermediate language called Common Language Runtime (CLR) it can be combined with other languages that are also compiled in to the CLR like Visual Basic (VB) .Net, and F#. The allowance and interaction between multiple languages in the .Net Framework enables projects to utilize existing code bases regardless of the actual syntax because they can be compiled in to CLR and executed as one codebase. As a software engineer I personally feel that it is really important to learn as many languages as you can or at least be open to learn as many languages as you can because no one language will work in every situation.  In some cases Java may be a better choice for a project and others may be C#. It really depends on the requirements of a project and the time constraints. In addition, I feel that is really important to concentrate on understanding the logic of programming and be able to translate business requirements into technical requirements. If you can understand both programming logic and business requirements then deciding which language to use is just basically choosing what syntax to write for a given business problem or need. In regards to code refactoring and dynamic languages it really does not matter. Eventually all projects will be refactored or decommissioned to allow for progress. This is the way of life in the software development industry. The language of a project should not be chosen based on the fact that a project will eventually be refactored because they all will get refactored.

  Read the article

• I am trying to figure out the best way to understand how to cache domain objects

  - by Brett Ryan

  I've always done this wrong, I'm sure a lot of others have too, hold a reference via a map and write through to DB etc.. I need to do this right, and I just don't know how to go about it. I know how I want my objects to be cached but not sure on how to achieve it. What complicates things is that I need to do this for a legacy system where the DB can change without notice to my application. So in the context of a web application, let's say I have a WidgetService which has several methods: Widget getWidget(); Collection<Widget> getAllWidgets(); Collection<Widget> getWidgetsByCategory(String categoryCode); Collection<Widget> getWidgetsByContainer(Integer parentContainer); Collection<Widget> getWidgetsByStatus(String status); Given this, I could decide to cache by method signature, i.e. getWidgetsByCategory("AA") would have a single cache entry, or I could cache widgets individually, which would be difficult I believe; OR, a call to any method would then first cache ALL widgets with a call to getAllWidgets() but getAllWidgets() would produce caches that match all the keys for the other method invocations. For example, take the following untested theoretical code. Collection<Widget> getAllWidgets() { Entity entity = cache.get("ALL_WIDGETS"); Collection<Widget> res; if (entity == null) { res = loadCache(); } else { res = (Collection<Widget>) entity.getValue(); } return res } Collection<Widget> loadCache() { // Get widgets from underlying DB Collection<Widget> res = db.getAllWidgets(); cache.put("ALL_WIDGETS", res); Map<String, List<Widget>> byCat = new HashMap<>(); for (Widget w : res) { // cache by different types of method calls, i.e. by category if (!byCat.containsKey(widget.getCategory()) { byCat.put(widget.getCategory(), new ArrayList<Widget>); } byCat.get(widget.getCatgory(), widget); } cacheCategories(byCat); return res; } Collection<Widget> getWidgetsByCategory(String categoryCode) { CategoryCacheKey key = new CategoryCacheKey(categoryCode); Entity ent = cache.get(key); if (entity == null) { loadCache(); } ent = cache.get(key); return ent == null ? Collections.emptyList() : (Collection<Widget>)ent.getValue(); } NOTE: I have not worked with a cache manager, the above code illustrates cache as some object that may hold caches by key/value pairs, though it's not modelled on any specific implementation. Using this I have the benefit of being able to cache all objects in the different ways they will be called with only single objects on the heap, whereas if I were to cache the method call invocation via say Spring It would (I believe) cache multiple copies of the objects. I really wish to try and understand the best ways to cache domain objects before I go down the wrong path and make it harder for myself later. I have read the documentation on the Ehcache website and found various articles of interest, but nothing to give a good solid technique. Since I'm working with an ERP system, some DB calls are very complicated, not that the DB is slow, but the business representation of the domain objects makes it very clumsy, coupled with the fact that there are actually 11 different DB's where information can be contained that this application is consolidating in a single view, this makes caching quite important.

  Read the article

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• Subterranean IL: Exception handling 2

  - by Simon Cooper

  Control flow in and around exception handlers is tightly controlled, due to the various ways the handler blocks can be executed. To start off with, I'll describe what SEH does when an exception is thrown. Handling exceptions When an exception is thrown, the CLR stops program execution at the throw statement and searches up the call stack looking for an appropriate handler; catch clauses are analyzed, and filter blocks are executed (I'll be looking at filter blocks in a later post). Then, when an appropriate catch or filter handler is found, the stack is unwound to that handler, executing successive finally and fault handlers in their own stack contexts along the way, and program execution continues at the start of the catch handler. Because catch, fault, finally and filter blocks can be executed essentially out of the blue by the SEH mechanism, without any reference to preceding instructions, you can't use arbitary branches in and out of exception handler blocks. Instead, you need to use specific instructions for control flow out of handler blocks: leave, endfinally/endfault, and endfilter. Exception handler control flow try blocks You cannot branch into or out of a try block or its handler using normal control flow instructions. The only way of entering a try block is by either falling through from preceding instructions, or by branching to the first instruction in the block. Once you are inside a try block, you can only leave it by throwing an exception or using the leave <label> instruction to jump to somewhere outside the block and its handler. The leave instructions signals the CLR to execute any finally handlers around the block. Most importantly, you cannot fall out of the block, and you cannot use a ret to return from the containing method (unlike in C#); you have to use leave to branch to a ret elsewhere in the method. As a side effect, leave empties the stack. catch blocks The only way of entering a catch block is if it is run by the SEH. At the start of the block execution, the thrown exception will be the only thing on the stack. The only way of leaving a catch block is to use throw, rethrow, or leave, in a similar way to try blocks. However, one thing you can do is use a leave to branch back to an arbitary place in the handler's try block! In other words, you can do this: .try { // ... newobj instance void [mscorlib]System.Exception::.ctor() throw MidTry: // ... leave.s RestOfMethod } catch [mscorlib]System.Exception { // ... leave.s MidTry } RestOfMethod: // ... As far as I know, this mechanism is not exposed in C# or VB. finally/fault blocks The only way of entering a finally or fault block is via the SEH, either as the result of a leave instruction in the corresponding try block, or as part of handling an exception. The only way to leave a finally or fault block is to use endfinally or endfault (both compile to the same binary representation), which continues execution after the finally/fault block, or, if the block was executed as part of handling an exception, signals that the SEH can continue walking the stack. filter blocks I'll be covering filters in a separate blog posts. They're quite different to the others, and have their own special semantics. Phew! Complicated stuff, but it's important to know if you're writing or outputting exception handlers in IL. Dealing with the C# compiler is probably best saved for the next post.

  Read the article

• how to keep display tick rate steady when using continuous collision detection?

  - by nas Ns

  (I've just found about this forum). I hope it is ok to repost my question again here. I posted this question at stackoverflow, but it looks like I might get better help here. Here is the question: I've implemented basic particles motion simulation with continuous collision detection. But there is small issue in display. Assume simple case of circles moving inside square. All elastic collisions. no firction. All motion is constant speed. No forces are involved, no gravity. So when a particle is moving, it is always moving at constant speed (in between collisions) What I do now is this: Let the simulation time step be 1 second (for example). This is the time step simulation is advanced before displaying the new state (unless there is a collision sooner than this). At start of each time step, time for the next collision between any particles or a particle with a wall is determined. Call this the TOC time; let’s say TOC was .5 seconds in this case. Since TOC is smaller than the standard time step, then the system is moved by TOC and the new system is displayed so that the new display shows any collisions as just taking place (say 2 circles just touched each other’s, or a circle just touched a wall) Next, the collision(s) are resolved (i.e. speeds updated, changed directions etc..). A new step is started. The same thing happens. Now assume there is no collision detected within the next 1 second (those 2 circles above will not be in collision any more, even though they are still touching, due to their speeds showing they are moving apart now), Hence, simulation time is advanced now by the full one second, the standard time step, and particles are moved on the screen using 1 second simulation time and new display is shown. You see what has just happened: One frame ran for .5 seconds, but the next frame runs for 1 second, may be the 3rd frame is displayed after 2 seconds, may be the 4th frame is displayed after 2.8 seconds (because TOC was .8 seconds then) and so on. What happens is that the motion of a particle on the screen appears to speed up or slow down, even though it is moving at constant speed and was not even involved in a collision. i.e. Looking at one particle on its own, I see it suddenly speeding up or slowing down, becuase another particle had hit a wall. This is because the display tick is not uniform. i.e. the frame rate update is changing, giving the false illusion that a particle is moving at non-constant speed while in fact it is moving at constant speed. The motion on the screen is not smooth, since the screen is not updating at constant rate. I am not able to figure how to fix this. If I want to show 2 particles at the moment of the collision, I must draw the screen at different times. Drawing the screen always at the same tick interval, results in seeing 2 particles before the collision, and then after the collision, and not just when they colliding, which looked bad when I tried it. So, how do real games handle this issue? How to display things in order to show collisions when it happen, yet keep the display tick constant? These 2 requirements seem to contradict each other’s.

  Read the article

• Bios Memory settings and Virtualization + Ubuntu (Unofficial Answers Welcome) [closed]

  - by TardisGuy

  Attempting to optimize my (Main Windowless) Ubuntu system for my uses I will detail questions below, I understand this might be the wrong place to ask these questions. If so, my apologies and I thank you so much for your patience. Thanks to all the volenteers that have helped me learn ubuntu over the years (Since 5.10) This is a "short" list of questions I have been trying to figure out for some time. If you feel you can answer one but not another, that's already more than I could ask for. I have wrote this up in a format for easy navigation to important points Hopefully to less annoy your eyes. You're welcome :) or i'm sorry i annoy you. :( If you would be so kind, Please format answers as follows: question 1: _ _ _ _ _ or question 1-a: _ _ _ _ _ If you want to simply link me to relevant information, rather than type up something really detailed; that would be more than awesome! Memory Specific Questions Goal: Maximizing memory bandwith to better perform in Virtualization, and Large file compression. (Possible conflict?) Ganged vs Unganged "which is better?"** is relative, i know. But what about ganged vs unganged - With or without Bank/channel interleaving? a: Speculation - If i understand correctly, "channel interleaving has something to do with using both channels to read or write in a kind of "striping" pattern, as opposed to a standard half duplex operation.(probably wrong) but wouldn't ganged channels make this irrelevant? Memory Interleaving(bank). Does it have a down side? Does it require a ratio of clocks? (If I run 4x4gig ddr3) a. If im reading correctly(trying to learn), this is designed to spread operations between latency cycles to work around the higher latency of "normal" operation. b. However it seems to me that it has to be: divisible by fractions of a master clock? So if i run memory at 1333mhz, then the mean between 2 (physical) banks would operate every (roughly) 600Mhz? Warning! Possibly utter nonsense: (1333/2 interleaving to act like 1 memory module per 2 sticks of a total of 4 sticks, meaning 2x channels@4) c. which makes me wonder if there would be left over clock cycles the system would have to... "truncate/balance" or something? But I'm certain theres a feature somewhere i don't understand. Virtualization Questions AMD-V - Option of IOMMU Turned it on, why do i have extra option of "64MB"? If IOMMU is on, but "64MB" is "disabled", Is it on? (have scoured google, I still dont know) a. I think i understand that its supposed to (kind of) "set aside" a part of ram to act as a faster interactive zone for "stuff" (usb, Graphics, and... what?) b. I am using Nvidia graphics on AMD (Used kernel option "iommu=pt iommu=1, pt "passthrough"? No idea what they do, found it on google to solve boot up issue) c. Will this option help me use low latency sound hardware, like my midi keyboard? Can you recommend any additional tweaks? a. sysctl settings? b. swap settings? Grats, youve reached the end. Thanks for Reading.

  Read the article

• Internet of Things Becoming Reality

  - by kristin.jellison

  The Internet of Things is not just on the radar—it’s becoming a reality. A globally connected continuum of devices and objects will unleash untold possibilities for businesses and the people they touch. But the “things” are only a small part of a much larger, integrated architecture. A great example of this comes from the healthcare industry. Imagine an expectant mother who needs to watch her blood pressure. She lives in a mountain village 100 miles away from medical attention. Luckily, she can use a small “wearable” device to monitor her status and wirelessly transmit the information to a healthcare hub in her village. Now, say the healthcare hub identifies that the expectant mother’s blood pressure is dangerously high. It sends a real-time alert to the patient’s wearable device, advising her to contact her doctor. It also pushes an alert with the patient’s historical data to the doctor’s tablet PC. He inserts a smart security card into the tablet to verify his identity. This ensures that only the right people have access to the patient’s data. Then, comparing the new data with the patient’s medical history, the doctor decides she needs urgent medical attention. GPS tracking devices on ambulances in the field identify and dispatch the closest one available. An alert also goes to the closest hospital with the necessary facilities. It sends real-time information on her condition directly from the ambulance. So when she arrives, they already have a treatment plan in place to ensure she gets the right care. The Internet of Things makes a huge difference for the patient. She receives personalized and responsive healthcare. But this technology also helps the businesses involved. The healthcare provider achieves a competitive advantage in its services. The hospital benefits from cost savings through more accurate treatment and better application of services. All of this, in turn, translates into savings on insurance claims. This is an ideal scenario for the Internet of Things—when all the devices integrate easily and when the relevant organizations have all the right systems in place. But in reality, that can be difficult to achieve. Core design principles are required to make the whole system work. Open standards allow these systems to talk to each other. Integrated security protects personal, financial, commercial and regulatory information. A reliable and highly available systems infrastructure is necessary to keep these systems running 24/7. If this system were just made up of separate components, it would be prohibitively complex and expensive for almost any organization. The solution is integration, and Oracle is leading the way. We’re developing converged solutions, not just from device to datacenter, but across devices, utilizing the Java platform, and through data acquisition and management, integration, analytics, security and decision-making. The Internet of Things (IoT) requires the predictable action and interaction of a potentially endless number of components. It’s in that convergence that the true value of the Internet of Things emerges. Partners who take the comprehensive view and choose to engage with the Internet of Things as a fully integrated platform stand to gain the most from the Internet of Things’ many opportunities. To discover what else Oracle is doing to connect the world, read about Oracle’s Internet of Things Platform. Learn how you can get involved as a partner by checking out the Oracle Java Knowledge Zone. Best regards, David Hicks

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• Oracle Executive Strategy Brief: Enterprise-Grade Cloud Applications

  - by B Shashikumar

  Cloud Computing has clearly evolved into one of the dominant secular trends in the industry. Organizations are looking to the cloud to change how they buy and consume IT. And its no longer about just lower up-front costs. The cloud promises to deliver greater agility and free up resources to focus on innovation versus running and maintaining systems. But are organizations actually realizing these benefits? The full promise of cloud is not being realized by customers who entrust their business to multiple niche cloud providers. While almost 9 out of 10 companies  expect more IT agility with cloud, only 47% are actually getting it (Source: 2011 State of Cloud Survey by Symantec). These niche cloud customers have also seen the promises of lower costs, efficiency gains, improved security, and compliance go unfulfilled. Having one cloud provider for customer relationship management (CRM) and another for human capital management (HCM), and then trying to glue these proprietary systems together while integrating to a back-office financial system can add to complexity and long-term costs. Completing a business process or generating an integrated report is cumbersome, and leverages incomplete data. Why can’t niche cloud providers deliver on the full promise of cloud? It’s simple: you still need to complete business processes. You still need reporting that enables you to take action using data from multiple systems. You still have to comply with SOX and other industry regulations. These requirements don’t go away just because you deploy in the cloud. Delivering lower up-front costs by enabling customers to buy software as a service (SaaS) is the easy part. To get real value that lasts longer than your quarterly report, it’s important to realize the benefits of cloud without compromising on functionality and while having the right level of control and flexibility. This is the true promise of cloud. Oracle’s cloud strategy centers around delivering the benefits of cloud—without compromise. We uniquely empower our customers with complete solutions and choice. From the richest functionality to integrated reporting and great user experience. It’s all available in the cloud. And it works not just with other Oracle cloud applications, but with your existing Oracle and third-party systems as well. This helps protect your current investments and extend their value as you journey to the cloud. We’ve made the necessary investments not only in our applications but also in the underlying technology that makes it all run—from the platform down to the hardware and operating system. We make it all. And we’ve engineered it to work together and be highly optimized for our customers, in the cloud. With Oracle enterprise-grade cloud applications, you get the benefits of cloud plus more power, more choice, and more confidence. Read more about how you can realize the true advantage of Cloud with Oracle Enterprise-grade Cloud applications in the Oracle Executive Strategy Brief here.  You can also attend an Oracle Cloud Conference event at a city near you. Register here. 

  Read the article

• How do I get 5.1 surround sound working on an Acer Aspire 5738ZG?

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• WF4 &ndash; Guess the number game!

  - by MarkPearl

  I posted yesterday how really good WF4 was looking. Today I thought I would show some real basics that I was able to figure out. This will be a simple example, I am going to make a flowchart workflow – which will prompt the user to guess the number until they guess the right number. Lets begin… Make a new project and make it a Workflow console Application. Then select the Workflow file and drag a FlowChart (2) to point 3. This will now show a green start circle in the designer form. We are going to work with primitives to start with. We are now going to drag a few objects onto the Workflow, We drag the WriteLine, Assign & Decision items onto the designer. Once they are dragged onto the designer we will want to link them up. The order that they are linked is critical since this will determine the order of the solution. In this case, we want the system to first ask “Guess a number”, then to wait for the user to input some code, and then to display “You got it” if they got it right, and “Try again” if they got it wrong. So we now link the arrows to the objects. This is done by moving the mouse pointer over the start objects and clicking on one of the toggles and then dragging it to the next object and releasing the button over one of the toggles. This will place an arrow from the source object to the target object. Okay… pretty simple stuff – now we just need these primitive objects to do stuff. Lets start with the WriteLine primitive. We place the text in inverted commas in the Text field. Because this field accepts any valid VB expression we could have put variables etc. in there if we wanted to. The next thing we want to do is allow the user to input a number. This brings up an interesting problem, if a user were to type in a number, there would need to be someway to declare a variable to hold that value for the life of the workflow. We can achieve this by declaring a variable. To declare a variable, move your cursor over the variables tab at the bottom of the workflow, and then type the name of the new variable in the “Create Variable” field and set it as shown in the image above. Now that we have a variable, we want to call the Console.Readline method and assign the inputted value from the Console to that variable. The code that cannot be seen is actually this – Convert.ToInt32(Console.ReadLine()) We now have a workflow that first prompts the user for a number, then allows the user to type in a number. We are almost done, we just need to make the system react to the value inputted. There are a few ways we could do this, I am going to use the Decision item. So select the Decision object on the designer and then view its properties (F4 for me), and in the condition field place a condition. For simplicity sake I have decided that if the user guesses 10, they will have guessed the number. This is now the completed workflow. Its really easy to understand and shows some really powerful principles for Business applications. You can run the application and see what it does. Imagine writing business solutions that do not worry about the exact flow of objects, but simply allows a business analyst or someone to configure the solution to work exactly as the business rules would dictate. And if the rules changed six months later all they would need to do is re-drag some of the flows. Now I do not know if WF4 will allow for this, but it feels like it is a step in the right direct.

  Read the article

• Project Time Tracker

  - by Geertjan

  Based on yesterday's blog entry, let's do something semi useful and display, in the project popup, which is available when you right-click a project in the Projects window, the time since the last change was made anywhere in the project, i.e., we can listen recursively to any changes done within a project and then update the popup with the newly acquired information, dynamically: import java.awt.event.ActionEvent; import java.text.DateFormat; import java.text.SimpleDateFormat; import java.util.ArrayList; import java.util.Collection; import java.util.List; import javax.swing.AbstractAction; import org.netbeans.api.project.Project; import org.netbeans.api.project.ProjectUtils; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionRegistration; import org.openide.awt.StatusDisplayer; import org.openide.filesystems.FileAttributeEvent; import org.openide.filesystems.FileChangeListener; import org.openide.filesystems.FileEvent; import org.openide.filesystems.FileRenameEvent; import org.openide.util.Lookup; import org.openide.util.LookupEvent; import org.openide.util.LookupListener; import org.openide.util.Utilities; import org.openide.util.WeakListeners; @ActionID( category = "Demo", id = "org.ptt.TrackProjectSelectionAction") @ActionRegistration( lazy = false, displayName = "NOT-USED") @ActionReference( path = "Projects/Actions", position = 0) public final class TrackProjectSelectionAction extends AbstractAction implements LookupListener, FileChangeListener { private Lookup.Result<Project> projects; private Project context; private Long startTime; private Long changedTime; private DateFormat formatter; private List<Project> timedProjects; public TrackProjectSelectionAction() { putValue("popupText", "Timer"); formatter = new SimpleDateFormat("HH:mm:ss"); timedProjects = new ArrayList<Project>(); projects = Utilities.actionsGlobalContext().lookupResult(Project.class); projects.addLookupListener( WeakListeners.create(LookupListener.class, this, projects)); resultChanged(new LookupEvent(projects)); } @Override public void resultChanged(LookupEvent le) { Collection<? extends Project> allProjects = projects.allInstances(); if (allProjects.size() == 1) { Project currentProject = allProjects.iterator().next(); if (!timedProjects.contains(currentProject)) { String currentProjectName = ProjectUtils.getInformation(currentProject).getDisplayName(); putValue("popupText", "Start Timer for Project: " + currentProjectName); StatusDisplayer.getDefault().setStatusText( "Current Project: " + currentProjectName); timedProjects.add(currentProject); context = currentProject; } } } @Override public void actionPerformed(ActionEvent e) { refresh(); } protected void refresh() { startTime = System.currentTimeMillis(); String formattedStartTime = formatter.format(startTime); putValue("popupText", "Timer started: " + formattedStartTime + " (" + ProjectUtils.getInformation(context).getDisplayName() + ")"); } @Override public void fileChanged(FileEvent fe) { changedTime = System.currentTimeMillis(); formatter = new SimpleDateFormat("mm:ss"); String formattedLapse = formatter.format(changedTime - startTime); putValue("popupText", "Time since last change: " + formattedLapse + " (" + ProjectUtils.getInformation(context).getDisplayName() + ")"); startTime = changedTime; } @Override public void fileFolderCreated(FileEvent fe) {} @Override public void fileDataCreated(FileEvent fe) {} @Override public void fileDeleted(FileEvent fe) {} @Override public void fileRenamed(FileRenameEvent fre) {} @Override public void fileAttributeChanged(FileAttributeEvent fae) {} } Some more work needs to be done to complete the above, i.e., for each project you somehow need to maintain the start time and last change and redisplay that whenever the user right-clicks the project.

  Read the article

• How to place rooms proceduraly (rule based) on in a game word

  - by gardian06

  I am trying to design the algorithm for my level generation which is a rule driven system. I have created all the rules for the system. I have taken care to insure that all rooms make sense in a grid type setup. for example: these rooms could make this configuration The logic flow code that I have so far Door{ Vector3 position; POD orient; // 5 possible values (up is not an option) bool Open; } Room{ String roomRule; Vector3 roomPos; Vector3 dimensions; POD roomOrient; // 4 possible values List doors<Door>; } LevelManager{ float scale = 18f; List usedRooms<Room>; List openDoors<Door> bool Grid[][][]; Room CreateRoom(String rule, Vector3 position, POD Orient){ place recieved values based on rule fill in other data } Vector3 getDimenstions(String rule){ return dimensions of the room } RotateRoom(POD rotateAmount){ rotate all items in the room } MoveRoom(Room toBeMoved, POD orientataion, float distance){ move the position of the room based on inputs } GenerateMap(Vector3 size, Vector3 start, Vector3 end){ Grid = array[size.y][size.x][size.z]; Room floatingRoom; floatingRoom = Room.CreateRoom(S01, start, rand(4)); usedRooms.Add(floatingRoom); for each Door in floatingRoom.doors{ openDoors.Add(door); } // fill used grid spaces floatingRoom = Room.CreateRoom(S02, end, rand(4); usedRooms.Add(floatingRoom); for each Door in floatingRoom.doors{ openDoors.Add(door); } Vector3 nRoomLocation; Door workingDoor; string workingRoom; // fill used grid spaces // pick random door on the openDoors list workingDoor = /*randomDoor*/ // get a random rule nRoomLocation = workingDoor.position; // then I'm lost } } I know that I have to make sure for convergence (namely the end is reachable), and to do this until there are no more doors on the openDoors list. right now I am simply trying to get this to work in 2D (there are rules that introduce 3D), but I am working on a presumption that a rigorous algorithm can be trivially extended to 3D. EDIT: my thought pattern so far is to take an existing open door and then pick a random room (restrictions can be put in later) place that room's center at the doors location move the room in the direction of the doors orientation half the rooms dimension w/respect to that axis then test against the 3D array to see if all the grid points are open, or have been used, or if there is even space to put the room (caseEdge) if caseEdge (which can also occur in between rooms) then put the door on a toBeClosed list, and remove it from the open list (placing a wall or something there). then to do some kind of test that both the start, and the goal are connected, and reachable from each other (each room has nodes for AI, but I don't want to "have" to pull those out to accomplish this). but this logic has the problem for say the U, or L shaped rooms in my example, and then I also have a problem conceptually if the room needs to be rotated.

  Read the article

• Instead of the specified Texture, black circles on a green background are getting rendered. Why?

  - by vinzBad

  I'm trying to render a Texture via OpenGL. But instead of the texture black circles on a green background are rendered. (They scale, depending what the rotation of the texture is) Example: The texture I'm trying to render is the following: This is the code I use to render the texture, it's located in my Sprite-class. public void Render() { Matrix4 matrix = Matrix4.CreateTranslation(-OriginX, -OriginY, 0) * Matrix4.CreateRotationZ(Rotation) * Matrix4.CreateTranslation(X, Y, 0); Vector2[] corners = { new Vector2(0,0), //top left new Vector2(Width ,0),//top right new Vector2(Width,Height),//bottom rigth new Vector2(0,Height)//bottom left }; //copy the corners to the uv coordinates Vector2[] uv = corners.ToArray<Vector2>(); //transform the coordinates for (int i = 0; i < 4; i++) corners[i] = new Vector2(Vector3.Transform(new Vector3(corners[i]), matrix)); //GL.Color3(TintColor); GL.BindTexture(TextureTarget.Texture2D, _ID); GL.Begin(BeginMode.Quads); { for (int i = 0; i < 4; i++) { GL.TexCoord2(uv[i]); GL.Vertex3(corners[i].X, corners[i].Y, _layerDepth); } } GL.End(); if (EnableDebugDraw) { GL.Color3(Color.Violet); GL.PointSize(3); GL.Begin(BeginMode.Points); { for (int i = 0; i < 4; i++) GL.Vertex2(corners[i]); } GL.End(); GL.Color3(Color.Green); GL.Begin(BeginMode.Points); GL.Vertex2(X, Y); GL.End(); } } This is how I setup OpenGL. public static void SetupGL() { GL.Enable(EnableCap.AlphaTest); GL.AlphaFunc(AlphaFunction.Greater, 0.1f); GL.Enable(EnableCap.Texture2D); GL.Hint(HintTarget.PerspectiveCorrectionHint, HintMode.Nicest); } With this function I load the texture: public static uint LoadTexture(string path) { uint id; GL.GenTextures(1, out id); GL.BindTexture(TextureTarget.Texture2D, id); Bitmap bitmap = new Bitmap(path); BitmapData data = bitmap.LockBits(new System.Drawing.Rectangle(0, 0, bitmap.Width, bitmap.Height), ImageLockMode.ReadOnly, System.Drawing.Imaging.PixelFormat.Format32bppArgb); GL.TexImage2D(TextureTarget.Texture2D, 0, PixelInternalFormat.Rgba, data.Width, data.Height, 0, OpenTK.Graphics.OpenGL.PixelFormat.Bgra, PixelType.UnsignedByte, data.Scan0); bitmap.UnlockBits(data); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMinFilter, (int)TextureMinFilter.Linear); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMagFilter, (int)TextureMagFilter.Linear); return id; } And here I call Sprite.Render() protected override void OnRenderFrame(FrameEventArgs e) { GL.ClearColor(Color.MidnightBlue); GL.Clear(ClearBufferMask.ColorBufferBit); _sprite.Render(); SwapBuffers(); base.OnRenderFrame(e); } As I stole this code from the Textures-Example from OpenTK, I don't understand why this doesn't work.

  Read the article

• No access to Samba shares

  - by koanhead

  I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

  Read the article

< Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >