Search Results

Search found 2592 results on 104 pages for 'dell 6224 powerconnect'.

Page 80/104 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • How to diagnose a Windows XP hard crash

    - by Jon
    I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

    Read the article

  • How can you convert audio (3.5mm) to S/PDIF?

    - by SSumner
    I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

    Read the article

  • Error 1603 when installing Microsoft Intellipoint 8.2 on Windows 7 x64

    - by HeB
    Installing MS Intellipoint 8.2 (for my MS touch mouse) on my Dell Inspiron 580 always gives the following error: "Setup must close because an error occurred. Verify that your computer meets the system requirements on the product packaging. Restart your computer and try running Setup again. If this error happens again, see Help for customer support options. (Error Code 1603)" I'm running Windows 7 x64 with all latest updates. MS solutions don't work. How to fix?

    Read the article

  • PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

    - by Bogan
    Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

    Read the article

  • Which server requirment for a Redmine, Git and website hosting?

    - by Ephismen
    Me and 9 other students are going to start a project that will last a minimum of 2 years, for this purpose we are looking to host all our work on a server. Here are a few tools we would like to work with: Redmine GIT Hosting a website/blog to show our work Hosting an internal and private development website/blog We haven't decided yet which OS we will install, but we were looking toward Ubuntu or Fedora. Having a limited budget, 300$/year, we would like to have some advices on the following dedicated server specifications: Kimsufi 2G: Hardware: Intel Celeron/Atom, 1.20 Ghz, 64 bits, 2Gb DDR2, HDD 1 To, Backup FTP 100Gb Network: Connection 100 Mbps, Illimited trafic Dedibox SC: Hardware: Dell Nano U2250, 1x 1,6GHz, 64 bits, 2Gb DDR2, HDD 160 Gb Network: Connection 1Gbit/sec, Illimited trafic Will these server be sufficient? Should we host the websites on another platform? Would a virtualized server be more appropriate? Thank you for your answers, Ephismen.

    Read the article

  • No sigal showing on LCD TV when Conects Leptop via VGA Cable [migrated]

    - by Amit Prajapati
    I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

    Read the article

  • How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

    - by user7651
    I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

    Read the article

  • Why does the Mac OS X (10.6) Finder stop being able to connect to Windows computers?

    - by Drarok
    We have one Mac (a MacBook Pro Unibody) amongst our Windows machines which connects to the "server" (actually a Dell running Windows XP Pro) to access documents. This works just fine most of the time, but sometimes after waking from sleep, it cannot connect to any Windows computer on the network. There are no errors (nor even any messages) in the Console application when attempting to connect either by the Finder's network browsing, nor when using the "Connect To Server" menu. I have tried "Relaunch" on Finder, toggled File Sharing, disabled and re-enabled the Airport, but nothing makes the Mac able to connect again until I reboot it! Other computers can connect to the machines, so it is definitely the Mac at fault. Are there any workarounds that anyone has found? Is there perhaps a way to re-start the samba client?

    Read the article

  • Wireless dropouts that only affect subset of devices

    - by jwaddell
    When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

    Read the article

  • Database or website of kernel config files ?

    - by Kami
    I've experienced some kernel panic after trying to compile gentoo kernel for a Sun UltraSPARC T5120 Server. The kernel panic came from a missing support for the SAS disk controller in the menu config. I've wasted so much time because I had no clue about the hardware I was using. I know that the kernel config depends on what you plan to do with your machine but I want to have a configuration file that at least match my hardware ! Is there a website or database that provides menuconfig's kernel configuration files for known or branded hardware like Dell Server or Apple computers ?

    Read the article

  • Automatic driver search & update on Windows?

    - by Ben
    I have a Dell laptop issued by my employer, and I always find it a real pain to search for, download and maintain their drivers. It baffles me that there does not seem to be a nice way (product, website, ...) to just download the stuff you need, without hassle. The same goes for the other Windows based laptops in my direct environment. Are there any (preferably free) automated solutions available? Or do you have a nice workflow - other than searching the manufacturers website - to help smoothing this process?

    Read the article

  • memtest86+ crashing on server

    - by user148723
    we have a few DELL 1950 servers. 1 of this servers has CentOS6.3 and its randomly rebooting so I suspected it was hardware. (no log generated) the other 4 servers do not randomly reboot. We passed memtest86+ on the 5 servers, and on 3 of them memtest86+ crashes (displaying an odd and colorful screen, like if a video card failed) Although I tested old memtest86 (not +), and all servers did not crash. I also tested other RAM testers utilities, no tool failing. have any of you guys experience this? thanks

    Read the article

  • My laptop suppose to have 6 GB ram but it's only 2 GB installed

    - by monablo
    My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

    Read the article

  • Moving Exchange .EDB and .STM file to other partition

    - by Jorge Fernandez
    Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

    Read the article

  • Installing Windows XP with pre installed Windows 7

    - by user243680
    Hello! I want to install Windows XP on my dell laptop which has pre installed Windows7 on it. I want windows Xp on my system because of my project issue. Now the problem is Windows7 does not allow to install Windows Xp on my system. I dont mind if windows 7 gets replaced by Windows XP,all i want is windows XP on my system.I am not getting the way to install XP. Can anyone guide me how to install Windows XP on my laptop? i need an urgent help.

    Read the article

  • How can I decrease the time spent reformatting / restoring user's workstations?

    - by CT
    I just working for a medium sized company (approx. 150 users). When user's workstations need to be reformatted for any variety of reasons, we reformat, reinstall windows from an oem disk, install drivers, install shop desired software, and restore user's documents from latest backup. While the process isn't very difficult it is very time consuming. What are some options simplify / speed up this process? Mostly a complete Windows shop with most servers running Win2k3 Enterprise and workstations running a variety of XP, Vista, and 7. Workstations are purchased through a variety of OEMs mostly Dell.

    Read the article

  • Samsung TV connected to PC for Powerpoint

    - by Skaughty
    I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

    Read the article

  • SQL server environment

    - by Olegas D
    Hello I'm considering a bit of changes in current sales environment. And trying to check all cons and pros. Current situation. SQL server (quite decent HP server - server1) + backup server (smaller Dell server - server2). all sql files and sql server itself are on the server1. If something goes wrong with server1 I will have to manually move to server2. Connecting to the sql server: 1 HQ (where server located) + 4 sites through VPN. Now I'm considering 2 scenarios: Buy some storage system + update existing servers (add ram, upgrade processors) and go for VMWare ESXI. Rent a server at a datacenter + rent virtual server in case real server goes down. Also rent some space at data storage to keep SQL files there. Have anyone considered these things and maybe found some good pros/cons list? ;) Thanks

    Read the article

  • Linux IO scheduler on databases with RAID

    - by Raghu
    Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

    Read the article

  • Debian 5.0.8 won't detect my ethernet adapter

    - by PaulH
    I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

    Read the article

  • Is there a pressure sensitive stylus for windows 8 power capacitative screen devices?

    - by JohnnyM
    I own a Dell XPS 12 Duo (filp-screen ultrabook with 10-point cap. screen) with Windows 8. Note: The ultrabook has Bluetooth 4.0. I would really love to have a preassure sensitive stylus that I could use to draw on the capacitative screen, when in tablet mode. So far I couldn't find any that would be compatible with Windows 8, maybe you guys could help. Must have: works with capacitative screen windows 8 compatible pressure sensitive Important: thin tip Nice to have: palm rejection tilt sensitive extra buttons (lots of them) TIA

    Read the article

  • VM clients can not access WAN

    - by Saariko
    I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

    Read the article

  • Any ramifications to disabling ClearPageFile

    - by user34710
    I am runing a Dell XPS 15z with a quad core I7, 8gb ram, 7200rpm hdd, windows 7 ultimate. My laptop was taking around 3 minutes to shut down, which seemed far too high to me. I did a bit of investigation, and it seemed that the ClearPageFile reg entry was set to 1, meaning that upon shutdown my pagefile.sys was being cleared before actually shutting the machine down. When I disable this setting, my laptop shuts down in about 20 seconds - clearly a big gain. My question is, are there any side effects of having this turned off (other than the security risk of the HDD being stolen, and still having any important info that was in the RAM up for grabs)?

    Read the article

  • Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

    - by Chake
    here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

    Read the article

  • Overheating on Ubuntu 12.04

    - by mati
    I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >