Search Results

Search found 2610 results on 105 pages for 'dell inspiron'.

Page 80/105 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Windows7 access to Printer shared with XP ?

  - by chmike

  I have, at home, an eeebox running with XP 24/24 with an attached printer (Canon IP5300) installed as shared. We have a few other laptops and PC, all with vista, that can access and print on the shared printer without problem. We just received a new Dell computer with Windows7-64 on it, but it fails to connect the shared printer. I tried connecting the printer with its USB cord directly to the Windows7 PC and the required driver was automatically downloaded and installed. I could then access the printer specific properties, etc. But if I connect it back to the XP computer, the windows7 PC still refused to connect to the remote printer although it now have the drivers. The windows7 is a family pack. By the way, I also have an old canon scanner still perfectly working with XP, but for which I can't find compatible drivers for windows 7. Do I have to buy a new one ? Any help would be welcome.

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• Best practice on Linux servers and CPU/power throttling?

  - by Valentin

  I am running a couple of Debian 6 (2.6.32) and 7 (3.2) Linux servers and all of them have energy saving settings enabled in their BIOS. Furthermore Linux shows that the CPUs are throttled if the servers are idling. I wonder if this could cause any harm - could there be e.g. performance impacts because Linux would not be able to handle throttling correctly? Is there a best practice for Linux servers and power/CPU throttling? Do you guys switch your energy profiles to "performance" or do you leave both the BIOS and the OS with their default settings? The reason I am asking is that I encountered several performance issues on physical Dell servers although all values (CPU/load, memory, I/O, network etc.) seemed to be normal. After changing the BIOS power settings to "performance" in those specific cases, I was able to get rid of the performance issues.

  Read the article

• Bad Resolution. Running Three screens at the same time

  - by Carl

  Hi I am currently using three screens at the same time with my ATI 5770 & an active displayport converter. The thing is that the third screen ( the one that is using the active displayport converter ) is showing terrible resolution compared to my other two screens. ( Samsung syncmaster p23 ) two of my screens got a max resolution of 1920* 1090, meanwhile the third on is only capable of 1600 * 1200. Do any of u guys got any solution to this problem? Btw, This is how the Active Displayport converter looks like http://accessories.us.dell.com/sna/products/Cables/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=330-5521#Overview

  Read the article

• Win7 backup fails with "The system cannot find the file specified" 0x80070002 - has worked before

  - by Thorbjørn Ravn Andersen

  I have a 500 GB USB-disk which has been used as a backup device for a few years now, but now fails without telling me why. This is a Dell box with Intel USB-controllers (so the NVIDEA problem does not apply here). I have previously had problems with a Git package marking a non-existent directory for backup (adding it make the backup succeede). The inaccessible boot partition problem described in Windows Backup fails with 0x80070002: "The system cannot find the file specified" does not apply to me. I would appreciate hints on where to look to identify why my backup fails so I can fix it.

  Read the article

• Windows Server 2008: Terminal Services / VDI

  - by JohnyD

  I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you. Update 1: What I'm looking to accomplish with this server is setting up a VDI to allow users to connect from thin-clients from within our network. They will also have to connect from outside our network via VPN which is already in place. Am I able to set this up using Windows Server 2008 (not R2) because I have a 16-bit application which needs to be supported. Unfortunately it's not a candidate as a Remote App.

  Read the article

• Windows 7 Line In Delay Issue

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• Artefacts during HDV capture

  - by Jakub Konecki

  When I try to capture HDV video stream from a Canon HV20 camera to a Dell Studio 1558 (Intel i7 720qm) laptop running Win 7 Home Premium x64, the image appears with a very annoying noise - it contains block artefacts. Something is wrong with the Fire Wire controller (Ricoh 1304 OHCI host controller, build-in). Tried changing the driver to legacy one to no avail. This does not happen with DV stream. I'm using a Belkin cable. The capture works OK on another machine.

  Read the article

• Why does my wifi fail to stay connected?

  - by Mark0978

  We have 5 different laptops in the house, 1 macbook, 1 Compaq, 3 dells, plus numerous little devices like ipods, squeezeboxs, squeezebox radios and controllers, you name it. All of them connect to and stay connected to the "downstairs" WIFI just fine. But my laptop (the most expensive of the lot) refuses to stay connected, preferring the much weaker and slower signal upstairs. My laptop is running Win7 (64 bit) Ultimate with an Intel 3945ABG WIFI contoller (It's a Dell Precision M6300). The WIFI Access Point is a Cisco WRT54G2 V1 with firmware: Firmware: DD-WRT v24-sp2 (10/10/09) micro Time: 11:11:10 up 42 min, load average: 0.06, 0.01, 0.00 WAN: Disabled

  Read the article

• Help me find the offending process waking my Windows 7 PC from hibernate every night

  - by DavidGugick

  Recently my Windows 7 64-bit PC has started waking every night from hibernation around 3:30am. I have done the following to try and figure out what is causing the issue with no luck: Examined the Windows Event logs. Nothing is noted Ran powercfg -lastwake and that reports nothing c:\powercfg -lastwake Wake History Count - 1 Wake History [0] Wake Source Count - 0 Ran powercfg to find what devices are armed for wake. Interestingly, this reports two items (I've already unchecked the "Allow this device to wake the computer" in device manager): The keyboard and something called the "eHome Infrared Receiver (USBCIR)". This is a desktop PC and it does not have an Infrared received, so I'm not sure what that device is. Suffice to say it does not have the option to "Allow device to wake..." available in Device Manager. C:\powercfg -devicequery wake_armed eHome Infrared Receiver (USBCIR) HID Keyboard Device My next step is to disable the Keyboard from wake, but I'm not convined that's the problem. This is on a Dell XPS435 if that helps anyone.

  Read the article

• Networking conflict - What is the most common default computer name?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "Dell(omitted)" logged on.) I've never been at a wifi spot that you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (I read via Google that Redhat linux default to "localhost" and Toshiba laptops default to "Toshiba.") Somebody probably keeps statistics. (I was referred here from serverfault.com) Thanks

  Read the article

• Why is my metro screen getting extended to half of the second screen?

  - by maximusyoda

  When I extend my desktop to the second screen, it stays fine for a few minutes, but after a while, the first metro screen stretches all the way to half of the second screen. The search bar etc stops working. The desktop itself shares fine. But the metro screen is messed up as well as the resolution. The second screen is using the recommended resolution. All I want is to have an extended screen. The problem occurs in my office Windows 8 laptop as well. Not sure what to do with it. Device: Surface Pro 2 External Monitor: Dell 2208WFP 1680 x 1050 Pixel Resoultion 22''

  Read the article

• Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

  - by threecheeseopera

  Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

  Read the article

• Win 2003 STD network adapter always showing DHCP when in static IP configuration, + it loses the DNS

  - by Darragh

  Hi, I have a server that after the first configuration it was DHCP, now I have added it to our domain and in a static IP, however after a few moments it returns to DHCP but with only some of the IPv4 setting staying the same, It loses DNS for example. I'm not sure what is causing the problem but all I know is this started to happen after I added it to the domain, Would it be a domain policy? or the NIC drivers Spec; Dell M605 Blade server Windows 2003 STD SP1 Intel Xeon Quad core NIC: Dual embedded Broadcom NetXtreme IITM 5708 Gigabit Ethernet NIC w/ TOE

  Read the article

• Help with proposed iSCSI SAN VMware implementation.

  - by obsidian

  We have four (with plans to grow to four more) Dell servers with 6 NICs. They are running VMware ESXi 4.1. We would like to connect all of them to an Openfiler iSCSI SAN via HP ProCurve 1810G switches. Based on the design below, is there anything I should be concerned about or anything unusual that I should look out for when making the iSCSI network configurations on the servers, switches and OpenFiler? Should I bond the connections on the servers or simply setup them up for failover? The primary goal is to maximize IOPS. Thanks in advance.

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Getting Synergy+ to work with Windows 7 64bit and Windows XP 32bit?

  - by john crisp

  My Windows XP box is Dell 4550 dimension. Windows 7 box is Home Premium. Synergy + installs fine on the Windows 7box, but using Windows xp as the client, it won't work? Do I need to disconnect the vga connection from my monitor and control entirely from the win7 dvi connection? In setting up ( links ) on Windows 7 as the server, I have NO way of inputing info? The setup on the Windows xp box is simple and does so OK, but I can't connect to the Windows xp box! It must be the vga connection on the Windows XP box. In order to use both machines, I have to turn one off and the other on. Hence-the VGA is needed on Windows XP. Any info/help most appreciated.

  Read the article

• Network connectivity issues with Windows Store

  - by Duy Tran

  I have my Windows 8 Pro build 9200 installed on my Dell laptop. I want to install some new apps and updates from the Store but there might be some network problem that caused the downloading gauge showing up but not really running at all. I followed some instructions that switched from local user to my Microsoft account, but this "Please wait" screen keeps showing and I don't really know why. I still have internet access and can use some apps like People, Mail, etc. with my account logged in, I can surf the net using Firefox, Chrome and Internet Explorer. I did another test using cmd with ping -t google.com and it showed that my laptop has internet access. Anybody knows a solution to make the Store working properly? Or is there any workaround to switch to the Microsoft account instead of a local user account?

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Windows XP not able to boot after loading isapnp.sys driver

  - by pragadheesh

  Hi When i power on my DELL Latitude E6400 laptop running on Windows XP SP3, i get a black screen and hangs after that. So I tried to boot through safe mode which hangs after loading the driver isapnp.sys. Doing a bit of googling i found out Windows XP not booting up including safe mode So I loaded my XP boot cd and tried Recovery Console. In the Recovery console, doing "dir" gives the error "an error occurred during directory enumeration". Then i tried chkdsk /p /r which gave "the volume appears to contain one or more unrecoverable problems" How can i fix these please. Thanks in advance.

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• What disk setup is needed / best practice for hypervisor-only servers?

  - by Luke404

  Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

  Read the article

• Alerting when a RAID Array disk fails locally on VMWare ESX or ESXi System

  - by Tim K

  With ESX and ESXi, we recently had two systems where that the boot partition became degraded due to a failed disk. The only alert we managed to capture was the visual alert on the Dell servers. We failed to received any electronic alerts regarding the failed or degraded array. Does anyone have any experience with monitoring for these types of failures? In both cases, the servers were running in a RAID 5 SCSI configuration (5 disks on one system, 3 disks on another) which if we were running a Windows Server OS, we would have had an alert created in the Eventviewer. Where would I begin to look for this solution. Can it be configured in VCenter or vFoglight?

  Read the article

• Why would http & https be blocked, even in safe mode with firewall disabled?

  - by Cogwheel

  I have a windows 7 machine (dell studio xps). Everything on it seems to be in working order. The network device says it has internet connectivity, and indeed I can ping websites, transfer files via ftp, connect to vpns and remote desktop, but the web won't work. I've disabled the windows firewall and still no go. There are no other firewalls installed. The computer came with a trial of norton 360 so I also used the norton removal tool (which solved a similar problem on another computer for me previously). Any thoughts?

  Read the article

• One NIC going to sleep on Centos system

  - by sbleon

  I have two Dell boxes with two ethernet ports a piece. I have a cable directly connecting two of these ports, creating a tiny LAN with 10.3.3.x addresses. The other port on each box is hooked up to a switch and has a DHCP-supplied address to talk to the outside world. I've noticed that when scp'ing large files from one box to the other over the private LAN, the transfers sometimes stall. It appears that any other network activity on either box will cause the transfer to resume. Wake-on-LAN is disabled on all interfaces according to ethtool. What else could be causing these stalled transfers?

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >