Search Results

Search found 29636 results on 1186 pages for 'fine uploader'.

Page 804/1186 | < Previous Page | 800 801 802 803 804 805 806 807 808 809 810 811  | Next Page >

• VPN Device behind router/firewall

  - by David Steven

  ROUTER A: Peplink 310 serving as the gateway/router/firewall at one location. ROUTER B: Linksys RV082 serving as the gateway/router/firewall at another location. I want to VPN these two locations together. The Peplink has a PPTP server and has proprietary site-to-site vpn if you had another peplink device. The Linksys has an IPsec vpn server. VPN A: I also have another spare linksys rv082. I'm trying to setup the other rv082 (VPN A) behind the peplink (ROUTER A) and get VPN A to talk to ROUTER B. I setup VPN A with a lan ip address and plugged one of it's LAN ports into the LAN. I was able to get to it's web interface fine. On ROUTER A I one-to-one nat mapped one of our public ip's to the LAN IP for VPN A. I opened TCP 50-51 and UDP 500 to VPN A. I configured the VPN settings on VPN A to connect to ROUTER B. I did the opposite for ROUTER B. But the vpn doesn't connect. Then I tried pluging VPN A's wan port into the lan, and gave it another LAN IP. I thought perpahs VPN A didn't want to send VPN traffic out over the LAN and wanted do send it over it's WAN. The vpn still doesn't connect. It what I'm trying to do even possible?

  Read the article

• Difference between accessing a website using Local host and IP address

  - by Cdeez

  I have developed an ASP.NET website and deployed into my IIS server. Now to see that my IIS is installed fine, I type local host in my address bar, and I get the welcome screen of IIS and its documentation in a separate window. Now I gave the url of my website http://localhost/mysites/site2/Default.aspx I access my site. Also giving my IP address instead of local host like: http://192.168.1.46/mysites/site2/Default.aspx also works. Just out of curiosity I wanted to see what happens when I give my IP address in addressbar. It asks me a user name and password saying:The server 192.168.1.46:80 requires a user name and password. I donot know what user name and password it is asking, and as of my knowledge I thought localhost points to my own IP address internally. But what is the difference and also what username and password do I need for it? Update: On chrome and IE just giving localhost displays the welcome screen, but on mozilla, localhost is also asking for a username and password.

  Read the article

• Windows 7, network connection with no default gateway: any way to change the "Unknown network" statu

  - by e-t172

  Hi, I have a computer running Windows 7 Pro RTM. This computer has two network connections: A Wi-fi connection to the Internet (through a home router) which works just fine. An OpenVPN virtual network connection. More precisely, this is a virtual Ethernet connection which behaves exactly like a physical Ethernet wired connection. My problem is that the "Network and sharing center" shows "Unknown network" for the OpenVPN connection. After some research I found that logical networks (outside a domain) are identified by the MAC address of the default gateway of the connection. Problem is, the OpenVPN connection has no default gateway: it is a private network, so I don't need one... Consequently, the "Unknown network" is always considered public, so the firewall is always in "public mode", which I don't want. Plus, I can't rename "Unknown connection" or anything (which makes sense), so it is kinda ugly. My goal is to define a proper logical network for the OpenVPN connection with the private profile. I know of some workarounds (disable the firewall, modify security policy to make all unknown networks "private") but they're still workarounds. I just want my clients to connect to the VPN without having to disable their firewall settings, without changing global configuration with potential side-effects (the "security policy" solution) and without having to look at an ugly "Unknown connection" in the Network and sharing center. Is there any way I can do this? I tried to check what was going on in the registry (HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList is interesting), but I still didn't find a way to "force" the OpenVPN connection to be assigned to a logical network. Any help would be very appreciated. A related question showed up at Superuser: http://superuser.com/questions/37355/windows-7-cant-identify-network/37422

  Read the article

• Backing up SQL NetApp Snapshots using TSM

  - by WerkkreW

  In our environment we have a 3 node SQL 2005 Cluster which is on NetApp storage. We are currently using SMSQL (NetApp SnapManager for SQL) to take Snapshot backups of the data. This works great, but due to some audit requirements we are also forced to maintain some copies on tape. We have used NDMP in other places across the enterprise but we do not want to use it in this specific instance. Basically what I need to do is, get the most recent snapshot copy of the databases on tape, via Tivoli Storage Manager (TSM). What I have done is, obtained a basic Windows Server 2003 VM with SnapDrive installed, which is SAN attached and zoned to the NetApp, and I have written a batch file to do the following: Mount the latest __RECENT snapshot lun to the host, using a specific drive letter Perform a TSM based incremental backup Dis-mount the LUN This seems to work fine, except sometimes the LUN's do not mount due to some sort of timeout. Also, due to my limited knowledge of windows batch scripting, I have no way to monitor the success or failure of these backups since I do not know how to send a valid return code back to the TSM scheduling service. Is there a more efficient/elegant way to accomplish this without NDMP?

  Read the article

• How to configure Apache to let PHP handle OPTIONS HTTP requests?

  - by Robin Berjon

  In order to set up a proper test suite for CORS (cross-domain requests) I need to be able to handle the HTTP OPTIONS method directly from script. I therefore have a simple PHP script that detects the OPTIONS method, and reacts accordingly by outputting some specific headers. The PHP side is not a problem. If I use curl to issue GET/POST/HEAD/PUT/etc. requests they all go to the script and it clearly handles them fine. If I issue an OPTIONS request however, it never reaches the script: Apache immediately replies listing a set of methods that it believes to be appropriate for this resource. I can tell that the script isn't run (no logging, none of its output makes it to the response, etc.). I've been going through the Apache configuration, have made sure no applicable .htaccess is in the way, I've tweaked a bunch of things such as Limit/LimitExcept directives, but I can't get it to change its behaviour. I've also tried to find information on a technique from my youth that could have helped here: NPH (non-parsed headers) scripts; but apparently that has now disappeared (at least, I can't find any recent information about it that works). So the question is: how do I tweak Apache's configuration so that it will let my script handle OPTIONS?

  Read the article

• Install Ubuntu 10.10 from loopback mounted ISO image

  - by Zifre

  I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

  Read the article

• EEE PC Keyboard malfunctioning - Ctrl key "sticks" after 10 seconds

  - by DWilliams

  I was given a EEE PC belonging to a friend of a friend to fix. The keyboard did not appear to work at all. I spent a while testing out various things, blowing the keyboard out, checking for damage, and so on. Nothing appeared to be physically wrong. At first I noticed that the keyboard appeared to work just fine for 10 seconds (on average, sometimes more sometimes less) after being powered on. It had been restored to the factory default xandros installation with no user set up, so I couldn't get in to mess with things since I couldn't type to make a user. I made an ubuntu live USB to boot it from, and managed to get the boot order changed to boot from USB in the ~10 seconds of working keyboard I had (I don't think I've ever had to rush around BIOS menus that quickly). After I got Ubuntu up on it, I played around a bit more and determined that apparently the ctrl key is stuck down (not literally, but it's on all the time). If I open gedit, pressing the "o" key brings the open dialog, "s" opens the save dialog, and all other behaviour you would expect to see if you were holding down the control key. The only exception that I noticed is the "9" and "0" keys. They function normally. Figuring that out I made a xandros user with a name/password consisting of 9's and 0's. I couldn't find any options in Xandros that could potentially be helpful. I'm not familiar with EEE PCs. Is it safe to assume that the keyboard is simply dead or could there be another problem? I don't want to purchase another keyboard for him if that isn't going to fix the problem. The netbook doesn't show any obvious signs of damage but the owner is a biker and very often has it with him on the road so it's been subjected to a good bit of vibration.

  Read the article

• Which Firefox add-on is responsible for a rendering bug?

  - by Gilles

  I've found a page that isn't rendered correctly by Firefox with my usual profile. It is rendered correctly with a blank profile. I have quite a few add-ons. One of them is surely the culprit. How can I find out which? Userscripts often affect the rendering. But I turned off Greasemonkey, and it didn't help. So it's something else, presumably an extension (what else could it be? I have no chrome/userChrome.css.). I'm looking for an easy way to find out which one, easier than disabling a bunch of extensions and restarting umpteen times. Related: Create a tool to help users identify a problematic add-on by bisecting the list of installed add-ons — a similar problem which would admit a similar solution. I want to automate this as much as possible; something like git bisect, that doesn't require me to change my actual profile, would be ideal. A Linux-specific solution is fine with me.

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• Setting up dnsmasq for a local network

  - by WishCow

  Me, and a small group of developers have just moved to a new office, and I'd like to set up dnsmasq on our development server, so when we deploy web apps there, we don't have to edit our own hosts files. We have a router at 192.168.3.1 which we don't have access to. I figured I'd install a DNS server on the development box, and we all record it's IP as a secondary DNS server. Unfortunately I'm strugling to make this work. The name of the devel server is devbox, it's IP is 192.168.3.99, and it's running the latest Ubuntu Server (Karmic) My computer is running Ubuntu Desktop (Karmic) What I'd like to achieve Let's say I have three websites, website1, website2, website3, running on the development box. I'd like to access them by the urls: http://website1.devbox http://website2.devbox http://website3.devbox So I have configured Apache on the devel box, installed dnsmasq, and put the following lines into it's hosts file: 192.168.3.99 website1.devbox 192.168.3.99 website2.devbox 192.168.3.99 website3.devbox and edited my own resolv.conf file to include the devel box as a nameserver: nameserver 192.168.3.99 It's working fine, I can access the sites. The problem is that it doesn't scale well. I'd like all the domains ending with .devbox forwarded to the development box, and this is what I'm struggling with. I have tried putting 192.168.3.99 devbox into the hosts file, and editing the line in dnsmasq.conf: # Add local-only domains here, queries in these domains are answered # from /etc/hosts or DHCP only. local=/devbox/ But I cannot get it working. If I try any url that is not explicitly present in the development box's hosts file, the dns lookup fails. Is the local directive for something else? Am I looking at the wrong place?

  Read the article

• Setting up dnsmasq for a local network

  - by WishCow

  Me, and a small group of developers have just moved to a new office, and I'd like to set up dnsmasq on our development server, so when we deploy web apps there, we don't have to edit our own hosts files. We have a router at 192.168.3.1 which we don't have access to. I figured I'd install a DNS server on the development box, and we all record it's IP as a secondary DNS server. Unfortunately I'm strugling to make this work. The name of the devel server is devbox, it's IP is 192.168.3.99, and it's running the latest Ubuntu Server (Karmic) My computer is running Ubuntu Desktop (Karmic) What I'd like to achieve Let's say I have three websites, website1, website2, website3, running on the development box. I'd like to access them by the urls: http://website1.devbox http://website2.devbox http://website3.devbox So I have configured Apache on the devel box, installed dnsmasq, and put the following lines into it's hosts file: 192.168.3.99 website1.devbox 192.168.3.99 website2.devbox 192.168.3.99 website3.devbox and edited my own resolv.conf file to include the devel box as a nameserver: nameserver 192.168.3.99 It's working fine, I can access the sites. The problem is that it doesn't scale well. I'd like all the domains ending with .devbox forwarded to the development box, and this is what I'm struggling with. I have tried putting 192.168.3.99 devbox into the hosts file, and editing the line in dnsmasq.conf: # Add local-only domains here, queries in these domains are answered # from /etc/hosts or DHCP only. local=/devbox/ But I cannot get it working. If I try any url that is not explicitly present in the development box's hosts file, the dns lookup fails. Is the local directive for something else? Am I looking at the wrong place?

  Read the article

• What is the correct iptables rule when NATing multiple private subnets?

  - by Jose Mendez

  I have a Centos minimal 6.5 acting as a router. eth0 is connected to a Cisco switch trunk port, allowing VLANs 200-213. I have several VLAN interfaces just as this link suggests: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-networkscripts-interfaces_802.1q-vlan-tagging.html And have IPv4 forwarding, so all my network devices from any of the networks 200-213 can communicate with each other using this linux box as their router. Problem is, I need them to access the Internet, so I added the following rule: iptables -t nat -A POSTROUTING -s 192.168.0.0/16 -j SNAT --to 1.1.1.56 1.1.1.56 is the "outside" address. This works fine, devices connected to the internal networks can ping Intertnet addresses BUT, they stop being able to talk to each other across subnets, so 192.168.211.55 can ping 8.8.8.8, but can't talk to 192.168.213.5. As soon as I do a service iptables restart to remove the rule, I can start talking across internal subnets again. What would be the correct way to set up NAT for multiple private subnets? Or maybe the correct way to set up forwarding?

  Read the article

• After update, suddenly lost ability to access Windows Server 2008 R2 shares from Windows XP clients

  - by Knute Knudsen

  Today I lost the ability to see my Windows Server 2008 R2 shares from any of my 3 Windows XP machines in my small office. The 5 Win7 machines haven't been affected (they are still able to browse/access the 2008 server), but none of my WinXP machines can access the 2008R2 server anymore. Yesterday (and for the previous year) everything was working fine. I do not have a domain setup. I can still access Win7 shares from WinXP clients. Browsing the server logs, I see that the following update was installed last night: > Installation Ready: The following updates are downloaded and ready for > installation. This computer is currently scheduled to install these > updates on ?Thursday, ?November ?15, ?2012 at 3:00 AM: > - Security Update for Windows Server 2008 R2 x64 Edition (KB2761226) > - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2729452) > - Windows Malicious Software Removal Tool x64 - November 2012 (KB890830) > - Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 R2 x64 Edition (KB2761451) It seems likely that something was changed in last night's update, but so far I haven't seen anything on microsoft.com to prove it. I did hear that XP is reaching the end of the road soon. Any ideas?

  Read the article

• SMTP Unreachable from Specific Networks

  - by Jason George

  I host my business site through a VPS account. The instance runs Ubuntu and I'm using POSTFIX+Dovecot as my mail server. For the most part, the mail server works fine. I have noticed, however, that I can not send mail from specific local networks. I noticed this at a client's office serval months ago. I can receive email, but any time I tried to send mail when connected to their network the connection would time out. Since I could send my mail after leaving, I chalked it up to improper network configuration and didn't worry about it. Unfortunately I've recently moved, switched service providers, and am forced to use the service providers router due to the special set-up they put in place to give me DSL in the sticks--well beyond the typical range for a DSL run. Now I'm unable to send email from home, which is a problem. I have tried sending email through my phone (using cellular service rather than my DSL) just to confirm the server is currently working. I'm not even sure where start debugging. Any ideas on how I might track down the issue would be greatly appreciated.

  Read the article

• Apache + mod_fcgid + perl = error 500

  - by f-aminov

  Hi guys! I'm trying to setup Apache2.2 with mod_fcgid and libapache2-mod-perl2 with no luck. I've created a fcgi-bin directory in the root directory of my website and put there a test.fcgi file with the following content: #!/usr/bin/perl use CGI; print "This is test.fcgi!\n"; While trying to access it via http://www.website.dom/fcgi-bin/test.fcgi I get error 500 (Internal Server Error). Here is my vhost config: <VirtualHost 95.131.29.226:8080> ServerName website.com DocumentRoot /var/www/data/website.com SuexecUserGroup user group ServerAlias www.website.com AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml <Directory "/var/www/data/website.com/fcgi-bin/"> Options +ExecCGI Allow from all Order allow,deny AddHandler fcgid-script .fcgi </Directory> </VirtualHost> fcgid.conf: <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi SocketPath /var/lib/apache2/fcgid/sock IdleTimeout 3600 ProcessLifeTime 7200 MaxProcessCount 8 DefaultMaxClassProcessCount 2 IPCConnectTimeout 8 IPCCommTimeout 60 </IfModule> SuExec log: [2010-04-06 03:02:47]: uid: (500/equ) gid: (502/equ) cmd: test.fcgi Apache error log: test! test! [Tue Apr 06 03:02:51 2010] [notice] mod_fcgid: process /var/www/data/website.com/fcgi-bin/test.fcgi(26267) exit(communication error), terminated by calling exit(), return code: 0 [Tue Apr 06 03:02:53 2010] [notice] mod_fcgid: process /var/www/data/website.com/fcgi-bin/test.fcgi(26261) exit(server exited), terminated by calling exit(), return code: 0 I've no clue why I'm getting error 500, but when I'm trying to access this file using console ($ perl /var/www/data/website.com/fcgin-bin/test.fcgi) everthing works fine without any errors... Any suggestions on how to solve this problem would be greatly appreciated. Thank you!

  Read the article

• Add bookmarks to Delicious and Google Bookmarks at the same time

  - by BrianH

  I have used delicious.com (or back then, del.icio.us) to store my bookmarks for a long time now, and I love it. I was looking through some of my Google services, and realized they have a bookmarking service that integrates with your Google searches (I thought they had a bookmarking service before, but it went away? Maybe not). I like delicious just fine - I'm not interested in leaving. But I also like how my Google bookmarks are highlighted (and I'm guessing, brought to the top) in my search results so I can easily tell if I've bookmarked a site (kind of like the "promote up" feature). I can't even count the number of times I search for a site only to find I've been there months or years ago. If sites I've bookmarked in the past are highlighted in my search results, it makes it easier to pick which search result to go to. My question is around bookmarking tools: Is there a bookmarklet or Firefox addon that will let me save a bookmark to multiple services at the same time, in this case, Google and Delicious? Or maybe a service to sync my delicious bookmarks to Google bookmarks on a regular basis? I have used the Delicious addon since the beginning - it would just be nice to add a bookmark to multiple services with 1 addon. For that matter, it would be nice to add Evernote into the mix - click 1 button to save the page to Evernote, and bookmark the page in Google and delicious. EDIT on 7/30/2009 - Summary: A proposed solution is to use the Delicious addon and the GMarks addon to keep the 2 services in sync. I was not able to get the 2 addons to keep everything in sync, so it was also suggest to use the Google Toolbar with the Delicious addon to keep everything in sync. I personally have reservations with letting Google know about every single site I visit, I believe this solution will work, so I am accepting it as the answer. I still wish there was a solution that would let you post a bookmark/page to multiple services at the same time (delicious, google, evernote, digg, diigo, etc.). Thanks!

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• Can't connect to Sql Server 2008 named instance

  - by eidylon

  I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

  Read the article

• Mod_Perl configuration for multiple domains

  - by daliaessam

  Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

  Read the article

• Make dhcp assign same IP and hostname for different interfaces at one machine

  - by Egeshi

  I have a feeling that question itself looks stupid but it is not. Please let me clarify. I have dynamic DNS with BIND and NIS configured at my LAN and have laptop which I am using in both wireless and wired mode. I mean that sometimes I have to use wired interface to achieve higher throughput but most of time I don't need it and using wireless mode. Everything works great. Issue is that I want both interfaces get same IP from DHCP. Just for convenient firewall setup. If I add both hosts to dhcp in this manner # bt wireless host bt { hardware ethernet 00:1f:1f:62:60:28; fixed-address 172.16.77.110; } # bt wired host bt { hardware ethernet 00:14:22:b7:5a:de; fixed-address 172.16.77.110; } DHCP says logs following message dhcpd: Dynamic and static leases present for 172.16.77.110 dhcpd: Remove host declaration bt-wired or remove 172.16.77.110 dhcpd: from the dynamic address pool for 172.16/16 Host records are added outside of any subnet, but it makes no difference if I put them there, effect is still the same. This is not critical but either is not my whim because even if DHCP seems to work fine for that "bt" host, I cannot make connection TO it from remote machine anymore with this definitely incorrect DHCP config. I'd be thankful if one spares a minute for advice about how to configure DHCPD correctly. UPDATE. I realize that there's a soulution to assign different hostname in DHCP config but would like to use benefits of short host names.

  Read the article

• With a username passed to a script, find the user's home directory

  - by Clinton Blackmore

  I am writing a script that gets called when a user logs in and check if a certain folder exists or is a broken symlink. (This is on a Mac OS X system, but the question is purely bash). It is not elegant, and it is not working, but right now it looks like this: #!/bin/bash # Often users have a messed up cache folder -- one that was redirected # but now is just a broken symlink. This script checks to see if # the cache folder is all right, and if not, deletes it # so that the system can recreate it. USERNAME=$3 if [ "$USERNAME" == "" ] ; then echo "This script must be run at login!" >&2 exit 1 fi DIR="~$USERNAME/Library/Caches" cd $DIR || rm $DIR && echo "Removed misdirected Cache folder" && exit 0 echo "Cache folder was fine." The crux of the problem is that the tilde expansion is not working as I'd like. Let us say that I have a user named george, and that his home folder is /a/path/to/georges_home. If, at a shell, I type: cd ~george it takes me to the appropriate directory. If I type: HOME_DIR=~george echo $HOME_DIR It gives me: /a/path/to/georges_home However, if I try to use a variable, it does not work: USERNAME="george" cd ~$USERNAME -bash: cd: ~george: No such file or directory I've tried using quotes and backticks, but can't figure out how to make it expand properly. How do I make this work?

  Read the article

• ssh X11 forwarding issue

  - by bbuser

  I have put ForwardX11 in my ~/.ssh/config and then I start a X11 application like this: ssh -f user@host 'someapp; sleep 1' This works fine. The application someapp has a button which opens a viewer application via a shell script viewer.sh. When I press the button the viewer comes up. This is all good and as expected, but if I do ssh -2 -f user@host 'someapp; sleep 1' there's trouble. someapp starts very well, but if I click the button the viewer doesn't show up. As the viewer is called via a shell script, I replaced the call with xclock and the situation was exactly the same - I think the viewer is not to blame. The situation is the same on Linux and AIX. The reason I need -2 is that I finally want to use connection multiplexing and this does only work with version 2. The reason for the sleep 1 is that it didn't work otherwise;-) To add more confusion, with ssh -2 -f user@host 'xterm &; app; sleep 1' the viewer works as long as the xterm is open. When I close xterm ssh -v outputs the following debug1: channel 1: FORCE input drain debug1: channel 0: free: client-session, nchannels 3 debug1: channel 1: free: x11, nchannels 2 and from that moment the viewer doesn't show when I press the button. I also replaced the viewer application with a script that writes the $DISPLAY variable to a file. The variable is always set correctly.

  Read the article

• Long Gigabit Ethernet Run

  - by Timothy R. Butler

  I am trying to get an Gig-E network between two buildings that are approximately 260 ft. away. While some TRENDnet switches failed to be able to connect to each other over Cat 6 at that distance, two Netgear 5-port Gig-E switches do so just fine. However, it still fails after I put in place APC PNET1GB ethernet surge protectors at each end before the line connects to the respective switches. So I find myself wondering if I simply need to find a better surge protector that doesn't degrade the signal as much (if so, what kind would you recommend?) or if I should give up on copper and use fiber between the buildings. If I opt to go the latter route, I could really use some pointers. It looks like LC connectors are the most common, but I keep running into some others as well. A media converter on each end seems like the simplest solution, but perhaps a Gig-E switch with an SFP port would make more sense? Given a very limited budget, sticking with my existing copper seems best, but if it is bound to be a headache, a 100 meter fiber cable is something I think I can swing cost wise.

  Read the article

• Plesk + Apache + PHP (FastCGI): Constant session permissions problems, conflicts between HTTP / HTTPS

  - by Hans Engel

  I've just moved a collection of sites over to a brand-new server, running Apache 2.2.3, PHP 5.3, and Plesk 10.1.1. I am having problems with file permissions on PHP sessions, which are being stored in /var/lib/php/session. I originally set the permissions like so for this folder: drwxrwx--- 2 apache psacln 8192 Mar 22 23:25 session This worked fine, for HTTP sessions. Files were being saved in that folder with these permissions: -rw------- 1 client1 psacln 0 Mar 22 23:24 sess_507... -rw------- 1 client2 psacln 0 Mar 22 23:25 sess_8o1... The problem, however, is that PHP scripts accessed via HTTPS do not seem to be run by the same client1 or client2 user. I deleted files in the session directory and accessed a login page via HTTPS to see how sessions were being saved when initiated via this protocol: -rw------- 1 apache apache 0 Mar 22 23:25 sess_507... So, for whatever reason, sessions initiated by clients browsing with HTTPS were being saved by apache:apache, while sessions from HTTP clients were saved with someclient:psacln. What I'd like to ask: How can I avoid this problem with session permissions? When sessions are created via unencrypted HTTP and a client visits an HTTPS portion of the site, permission errors are shown, since apache:apache tries to access the session save created by someclient:psacln. The converse is also true. Can I change the user which runs the Apache HTTPS server, via Plesk or the command line? If not, can I have PHP sessions save with rw-rw---- permissions, and then add apache to the psacln group? Any other suggestions on how to fix this issue?

  Read the article

• SquidGuard and Active Directory: how to deal with multiple groups?

  - by Massimo

  I'm setting up SquidGuard (1.4) to validate users against an Active Directory domain and apply ACLs based on group membership; this is an example of my squidGuard.conf: src AD_Group_A { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_A%2cdc=domain%2cdc=com)) } src AD_Group_B { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_B%2cdc=domain%2cdc=com)) } dest dest_a { domainlist dest_a/domains urllist dest_b/urls log dest_a.log } dest dest_b { domainlist dest_b/domains urllist dest_b/urls log dest_b.log } acl { AD_Group_A { pass dest_a !dest_b all redirect http://some.url } AD_Group_B { pass !dest_a dest_b all redirect http://some.url } default { pass !dest_a !dest_b all redirect http://some.url } } All works fine if an user is member of Group_A OR Group_B. But if an user is member of BOTH groups, only the first source rule is evaluated, thus applying only the first ACL. I understand this is due to how source rule matching works in SquidGuard (if one rule matches, evaluation stops there and then the related ACL is applied); so I tried this, too: src AD_Group_A_B { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_A%2cdc=domain%2cdc=com)) ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_B%2cdc=domain%2cdc=com)) } acl { AD_Group_A_B { pass dest_a dest_b all redirect http://some.url } [...] } But this doesn't work, too: if an user is member of either one of those groups, the whole source rule is matched anyway, so he can reach both destinations (which is of course not what I want). The only solution I found so far is creating a THIRD group in AD, and assign a source rule and an ACL to it; but this setup grows exponentially with more than two or three destination sets. Is there any way to handle this better?

  Read the article

< Previous Page | 800 801 802 803 804 805 806 807 808 809 810 811  | Next Page >