Search Results

Search found 23603 results on 945 pages for 'non technical manager'.

Page 804/945 | < Previous Page | 800 801 802 803 804 805 806 807 808 809 810 811  | Next Page >

• Memory Bandwidth Performance for Modern Machines

  - by porgarmingduod

  I'm designing a real-time system that occasionally has to duplicate a large amount of memory. The memory consists of non-tiny regions, so I expect the copying performance will be fairly close to the maximum bandwidth the relevant components (CPU, RAM, MB) can do. This led me to wonder what kind of raw memory bandwidth modern commodity machine can muster? My aging Core2Duo gives me 1.5 GB/s if I use 1 thread to memcpy() (and understandably less if I memcpy() with both cores simultaneously.) While 1.5 GB is a fair amount of data, the real-time application I'm working on will have have something like 1/50th of a second, which means 30 MB. Basically, almost nothing. And perhaps worst of all, as I add multiple cores, I can process a lot more data without any increased performance for the needed duplication step. But a low-end Core2Due isn't exactly hot stuff these days. Are there any sites with information, such as actual benchmarks, on raw memory bandwidth on current and near-future hardware? Furthermore, for duplicating large amounts of data in memory, are there any shortcuts, or is memcpy() as good as it will get? Given a bunch of cores with nothing to do but duplicate as much memory as possible in a short amount of time, what's the best I can do?

  Read the article

• Free tools/libraries to compare tables with filtering in different databases and visualize/sync diff

  - by MicMit

  I am building certain GUI in C# for a content manager and looking for the tools or code snippets or open libraries ( code ideally in C# ) which allow me the following : 1. For table A in database X (test ) and table A in database Y (production) and for a simple filter ( e.g. listname = "XYZ" ) I need to show additions/deletions/updates in some way. which might be side-by-side or just html report 2 record added html table with some fields 2 record deleted html table with some fields Considering that this task is very common, I guess, certain components should exist ? Components either return some collections from parameters given for further visualizing or just produce reports mentioned above. 2. I need to push changes for the filter I mentioned in 1 and update table in production database for this filter only ( ie for the particular list approved by content person). Again probably there are certain SQL code generators - components in addition to diffs or standalone. 3. The key thing tools/libraries - should be suitable for integration with the existing application in C#.

  Read the article

• mySQL Efficiency Issue - How to find the right balance of normalization...?

  - by Foo

  I'm fairly new to working with relational databases, but have read a few books and know the basics of good design. I'm facing a design decision, and I'm not sure how to continue. Here's a very over simplified version of what I'm building: People can rate photos 1-5, and I need to display the average votes on the picture while keeping track of the individual votes. For example, 12 people voted 1, 7 people voted 2, etc. etc. The normalization freak of me initially designed the table structure like this: Table pictures id* | picture | userID | Table ratings id* | pictureID | userID | rating With all the foreign key constraints and everything set as they shoudl be. Every time someone rates a picture, I just insert a new record into ratings and be done with it. To find the average rating of a picture, I'd just run something like this: SELECT AVG(rating) FROM ratings WHERE pictureID = '5' GROUP by pictureID Having it setup this way lets me run my fancy statistics to. I can easily find who rated a certain picture a 3, and what not. Now I'm thinking if there's a crapload of ratings (which is very possible in what I'm really designing), finding the average will became very expensive and painful. Using a non-normalized version would seem to be more efficient. e.g.: Table picture id | picture | userID | ratingOne | ratingTwo | ratingThree | ratingFour | ratingFive To calculate the average, I'd just have to select a single row. It seems so much more efficient, but so much more uglier. Can someone point me in the right direction of what to do? My initial research shows that I have to "find the right balance", but how do I go about finding that balance? Any articles or additional reading information would be appreciated as well. Thanks.

  Read the article

• How to create a fully lazy singleton for generics

  - by Brendan Vogt

  I have the following code implementation of my generic singleton provider: public sealed class Singleton<T> where T : class, new() { Singleton() { } public static T Instance { get { return SingletonCreator.instance; } } class SingletonCreator { static SingletonCreator() { } internal static readonly T instance = new T(); } } This sample was taken from 2 articles and I merged the code to get me what I wanted: http://www.yoda.arachsys.com/csharp/singleton.html and http://www.codeproject.com/Articles/11111/Generic-Singleton-Provider. This is how I tried to use the code above: public class MyClass { public static IMyInterface Initialize() { if (Singleton<IMyInterface>.Instance == null // Error 1 { Singleton<IMyInterface>.Instance = CreateEngineInstance(); // Error 2 Singleton<IMyInterface>.Instance.Initialize(); } return Singleton<IMyInterface>.Instance; } } And the interface: public interface IMyInterface { } The error at Error 1 is: 'MyProject.IMyInterace' must be a non-abstract type with a public parameterless constructor in order to use it as parameter 'T' in the generic type or method 'MyProject.Singleton<T>' The error at Error 2 is: Property or indexer 'MyProject.Singleton<MyProject.IMyInterface>.Instance' cannot be assigned to -- it is read only How can I fix this so that it is in line with the 2 articles mentioned above? Any other ideas or suggestions are appreciated.

  Read the article

• Application log aggregation, management and notifications...

  - by Matthew Savage

  I'm wondering what everyone is using for logging, log management and log aggregation on their systems. I am working in a company which uses .NET for all it's applications and all systems are Windows based. Currently each application looks after its own logging and notifications of failures (e.g. if app A fails it will send out its own 'call for help' to an admin). While this current practice works its a bit hacky and hard to manage. I've been trying to find some options for making this work better and I've come up with the following: log4net & Chainsaw (ah, if it works). Logging via log4net or another framework into a central database & rolling our own management tool. Logging to the Windows event log and using MOM or System Center Operations Manager to aggregate and manage each of these servers & their apps. A hand-rolled solution to suck all the log files into one point and work some magic across them. Essentially what we are after is something which can pull log entries all together and allow for some analytics to be run across them, plus use a kind of event based system to, for example, send out a warning email when there have been 30+ warning level logs for an application in the last x minutes. So is there anything I've missed, or something someone else can suggest?

  Read the article

• Web API Getting Http 500 error : Issue Solved See Below

  - by Joe Grasso

  Here is my MVC Controller and everything is fine: private UnitOfWork UOW; public InventoryController() { UOW = new UnitOfWork(); } // GET: /Inventory/ public ActionResult Index() { var products = UOW.ProductRepository.GetAll().ToList(); return View(products); } Same method call in API Controller gives me an Http 500 Error: private UnitOfWork _unitOfWork; public TestController() { _unitOfWork = new UnitOfWork(); } public IEnumerable<Product> Get() { var products = _unitOfWork.ProductRepository.GetAll().ToList(); return products; } Debugging shows that indeed there is data being returned in both controllers' UOW calls. I then added a customer configuration in Global: public static void CustomizeConfig(HttpConfiguration config) { config.Formatters.Remove(config.Formatters.XmlFormatter); var json = config.Formatters.JsonFormatter; json.SerializerSettings.ContractResolver = new CamelCasePropertyNamesContractResolver(); } I am still receiving an Http 500 in API Controller ONLY and at a loss as to why. Any ideas? UPDATE: It appears using lazy loading caused the problem. When I set the associated properties to NON-VIRTUAL the Test API provided the necessary JSON string. However, whereas before I had the Vendor class included, I only have VendorId. I really wanted to included the associated classes. Any ideas? I know there are alot of smart people out there. Anyone?

  Read the article

• typed-dataset initializer problem with C# windows app.

  - by Eyla

  Greetings, I'm working in windows application using C#. I have typed-dataset called packetsDBDataSet and it has table adapter called packetsTableAdapter with method to insert data called InsertPackets(). when I want to insert new data I used a code that I used before with asp.net page and it was working ok but not I'm getting error. here is the code: public packetsDBDataSetTableAdapters.packetsTableAdapter ds = new packetsDBDataSetTableAdapters.packetsTableAdapter(); public packetsDBDataSet.packetsDataTable insert = ds.InsertPackets(); and here is the error: Error 1 A field initializer cannot reference the non-static field, method, or property 'Packets.Form1.ds' C:\Users\Ali\Documents\Visual Studio 2008\Projects\Packets-3\Packets\Packets\Form1.cs 26 59 Packets I already included to my project: using Packets; using Packets.packetsDBDataSetTableAdapters; please advice to solve this problem. Update : I also tried : public packetsDBDataSetTableAdapters.packetsTableAdapter ds = new packetsDBDataSetTableAdapters.packetsTableAdapter(); ds.InsertPackets("1","2","3"); and I'm getting this error: Error 1 Invalid token '(' in class, struct, or interface member declaration C:\Users\Ali\Documents\Visual Studio 2008\Projects\Packets-3\Packets\Packets\Form1.cs 28 29 Packets

  Read the article

• Linked Measure Groups and Local Dimensions

  - by ekoner

  Mulling over something I've been reading up on. According to Chris Webb, A linked measure group can only be used with dimensions from the same database as the source measure group. So I took this to mean as long as two cubes share a database, a linked measure group can be used with a dimension. So I created a new cube and added a local measure group, a local dimension and a linked measure group. However, I can't create a relationship between the linked measure group and the local dimension even though they are within the same database. I get the message below: Regular relationships in the current database between non-linked (local) dimensions and linked measure groups cannot be edited. These relationship can only be created through the wizard. This dialog can be used to delete these relationships. I see that I can go to the original cube and add the dimension there, but does the message below mean I have an alternative? I just know it's going to be something simple and trivial! Thanks for reading.

  Read the article

• Detecting a Dispose() from an exception inside using block

  - by Augusto Radtke

  I have the following code in my application: using (var database = new Database()) { var poll = // Some database query code. foreach (Question question in poll.Questions) { foreach (Answer answer in question.Answers) { database.Remove(answer); } // This is a sample line that simulate an error. throw new Exception("deu pau"); database.Remove(question); } database.Remove(poll); } This code triggers the Database class Dispose() method as usual, and this method automatically commits the transaction to the database, but this leaves my database in an inconsistent state as the answers are erased but the question and the poll are not. There is any way that I can detect in the Dispose() method that it being called because of an exception instead of regular end of the closing block, so I can automate the rollback? I don´t want to manually add a try ... catch block, my objective is to use the using block as a logical safe transaction manager, so it commits to the database if the execution was clean or rollbacks if any exception occured. Do you have some thoughts on that?

  Read the article

• JSF/Seam - new component instance on submit?

  - by purecharger

  And my confusion with JSF continues. This is a continuation of a question asked yesterday, but I feel it warrants a new question. I have a single seam component that expects a URL parameter to be injected for retrieving a List<String> from a method. This works perfectly on the first navigation to the page. The List is used to display many different selectOneRadio groups that populate a <h:form/>. Now on the submit, I cannot get the URL parameter to be injected or otherwise set on the component! Adding <h:inputHidden/> causes FacesExceptions to be thrown. Then I tried setting the List as an instance variable on the object, and when the subsequent call is made on the submit (which I also do not understand why that is done) I check to see if the variable is non-null: if it isn't, return it. Now I found that a new instance of the component is created on submit!!! getList() called this.toString(): .BeanAction@5fd98420 #### This is when submit is clicked getList() called this.toString(): .BeanAction@22aacbce The component has the following annotations: Stateful @Scope(ScopeType.CONVERSATION) @Name("bean") @Restrict("#{identity.loggedIn}") Can someone explain why there is a new instance of the component created? I'm really not quite sure how to go about handling this. I thought the hidden parameter would work, because that is how I would do it with straight HTML, and I'm a little surprised that its not working for JSF/Seam.

  Read the article

• Java and .net interoperability

  - by dineshrekula

  I have a c# program through which i am opening cmd window as a a process. in this command window i am running a batch file. i am redirecting the output of that batch file commands to a Text File. When i run my application everything seems to be ok. But few times, Application is giving some error like "Can't access the file. it's being used by another application" at the same time cmd window is not getting closed. If we close the cmd process through the Task Manager, then it's writing the content to the file and getting closed. Even though i closed the cmd process, still file handle is not getting released. so that i am not able to run the application next time onwards.Always it's saying Can't access the file. Only after restarting the system, it's working. Here is my code: Process objProcess = new Process(); ProcessStartInfo objProInfo = new ProcessStartInfo(); objProInfo.WindowStyle = ProcessWindowStyle.Maximized; objProInfo.UseShellExecute = true; objProInfo.FileName = "Batch file path" objProInfo.Arguments = "Some Arguments"; if (Directory.Exists(strOutputPath) == false) { Directory.CreateDirectory(strOutputPath); } objProInfo.CreateNoWindow = false; objProcess.StartInfo = objProInfo; objProcess.Start(); objProcess.WaitForExit(); test.bat: java classname argument > output.txt Here is my question: I am not able to trace where the problem is.. How we can see the process which holding handle on ant file. Is there any suggestions for Java and .net interoperability

  Read the article

• Function returning dictionary, not seen by calling function

  - by twiga

  Hi There, I have an interesting problem, which is a function that returns a Dictionary<String,HashSet<String>>. The function converts some primitive structs to a Dictionary Class. The function is called as follows: Dictionary<String, HashSet<String>> Myset = new Dictionary<String,HashSet<String>>(); Myset = CacheConverter.MakeDictionary(_myList); Upon execution of the two lines above, Myset is non-existent to the debugger. Adding a watch results in: "The name 'Myset' does not exist in the current context" public Dictionary<String, HashSet<String>> MakeDictionary(LightWeightFetchListCollection _FetchList) { Dictionary<String, HashSet<String>> _temp = new Dictionary<String, HashSet<String>>(); // populate the Dictionary // return return _temp; } The Dictionary _temp is correctly populated by the called function and _temp contains all the expected values. The problem seems to be with the dictionary not being returned at all. Examples I could find on the web of functions returning primitive Dictionary<string,string> work as expected.

  Read the article

• Getting exception when trying to monkey patch pymongo.connection._Pool

  - by Creotiv

  I use pymongo 1.9 on Ubuntu 10.10 with python 2.6.6 When i trying to monkey patch pymongo.connection._Pool i'm getting error on connection: AutoReconnect: could not find master/primary But when i change _Pool class in pymongo.connection module, it work pretty fine. Even if i copy _Pool implementation from pymongo.connection module and will try to monkey patch by the same code, it still giving same exception. I need to remove threading.local from _Pool class, because i use gevent and i need to implement Pool for all mongo connections(for all threads). I use this code: import pymongo class GPool: """A simple connection pool. Uses thread-local socket per thread. By calling return_socket() a thread can return a socket to the pool. Right now the pool size is capped at 10 sockets - we can expose this as a parameter later, if needed. """ # Non thread-locals __slots__ = ["sockets", "socket_factory", "pool_size","sock"] #sock = None def __init__(self, socket_factory): self.pool_size = 10 if not hasattr(self,"sock"): self.sock = None self.socket_factory = socket_factory if not hasattr(self, "sockets"): self.sockets = [] def socket(self): # we store the pid here to avoid issues with fork / # multiprocessing - see # test.test_connection:TestConnection.test_fork for an example # of what could go wrong otherwise pid = os.getpid() if self.sock is not None and self.sock[0] == pid: return self.sock[1] try: self.sock = (pid, self.sockets.pop()) except IndexError: self.sock = (pid, self.socket_factory()) return self.sock[1] def return_socket(self): if self.sock is not None and self.sock[0] == os.getpid(): # There's a race condition here, but we deliberately # ignore it. It means that if the pool_size is 10 we # might actually keep slightly more than that. if len(self.sockets) < self.pool_size: self.sockets.append(self.sock[1]) else: self.sock[1].close() self.sock = None pymongo.connection._Pool = GPool

  Read the article

• How can I extend this SQL query to find the k nearest neighbors?

  - by Smigs

  I have a database full of two-dimensional data - points on a map. Each record has a field of the geometry type. What I need to be able to do is pass a point to a stored procedure which returns the k nearest points (k would also be passed to the sproc, but that's easy). I've found a query at http://blogs.msdn.com/isaac/archive/2008/10/23/nearest-neighbors.aspx which gets the single nearest neighbour, but I can't figure how to extend it to find the k nearest neighbours. This is the current query - T is the table, g is the geometry field, @x is the point to search around, Numbers is a table with integers 1 to n: DECLARE @start FLOAT = 1000; WITH NearestPoints AS ( SELECT TOP(1) WITH TIES *, T.g.STDistance(@x) AS dist FROM Numbers JOIN T WITH(INDEX(spatial_index)) ON T.g.STDistance(@x) < @start*POWER(2,Numbers.n) ORDER BY n ) SELECT TOP(1) * FROM NearestPoints ORDER BY n, dist The inner query selects the nearest non-empty region and the outer query then selects the top result from that region; the outer query can easily be changed to (e.g.) SELECT TOP(20), but if the nearest region only contains one result, you're stuck with that. I figure I probably need to recursively search for the first region containing k records, but without using a table variable (which would cause maintenance problems as you have to create the table structure and it's liable to change - there're lots of fields), I can't see how.

  Read the article

• PyQt Drag and Drop - Nothing happens

  - by Umang

  Hi, I'm trying to get drop a file onto a Window (I've tried the same thing with a QListWidget without success there too) test.py: #! /usr/bin/python # Test from PyQt4 import QtCore, QtGui import sys from qt_test import Ui_MainWindow class MyForm(QtGui.QMainWindow, Ui_MainWindow): def __init__(self, parent=None): QtGui.QWidget.__init__(self, parent) self.setupUi(self) self.__class__.dragEnterEvent = self.DragEnterEvent self.__class__.dragMoveEvent = self.DragEnterEvent self.__class__.dropEvent = self.drop self.setAcceptDrops(True) print "Initialized" self.show() def DragEnterEvent(self, event): event.accept() def drop(self, event): link=event.mimeData().text() print link def main(): app = QtGui.QApplication(sys.argv) mw = MyForm() sys.exit(app.exec_()) if __name__== "__main__": main() And here's qt_test.py # -*- coding: utf-8 -*- # Form implementation generated from reading ui file 'untitled.ui' # # Created: Thu May 20 12:23:19 2010 # by: PyQt4 UI code generator 4.6 # # WARNING! All changes made in this file will be lost! from PyQt4 import QtCore, QtGui class Ui_MainWindow(object): def setupUi(self, MainWindow): MainWindow.setObjectName("MainWindow") MainWindow.resize(800, 600) MainWindow.setAcceptDrops(True) self.centralwidget = QtGui.QWidget(MainWindow) self.centralwidget.setObjectName("centralwidget") MainWindow.setCentralWidget(self.centralwidget) self.retranslateUi(MainWindow) QtCore.QMetaObject.connectSlotsByName(MainWindow) def retranslateUi(self, MainWindow): MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "MainWindow", None, QtGui.QApplication.UnicodeUTF8)) I've read this email and I've followed everything said there. I still don't get any output except "Initialized" and the drag doesn't seem to get accepted (both for files from a file manager and plain text dragged from a text editor). Do you know what I'm doing wrong? Thanks!

  Read the article

• Can I use the auto-generated Linq-to-SQL entity classes in 'disconnected' mode?

  - by Gary McGill

  Suppose I have an automatically-generated Employee class based on the Employees table in my database. Now suppose that I want to pass employee data to a ShowAges method that will print out name & age for a list of employees. I'll retrieve the data for a given set of employees via a linq query, which will return me a set of Employee instances. I can then pass the Employee instances to the ShowAges method, which can access the Name & Age fields to get the data it needs. However, because my Employees table has relationships with various other tables in my database, my Employee class also has a Department field, a Manager field, etc. that provide access to related records in those other tables. If the ShowAges method were to invoke any of those methods, this would cause lots more data to be fetched from the database, on-demand. I want to be sure that the ShowAges method only uses the data I have already fetched for it, but I really don't want to have to go to the trouble of defining a new class which replicates the Employee class but has fewer methods. (In my real-world scenario, the class would have to be considerably more complex than the Employee class described here; it would have several 'joined' classes that do need to be populated, and others that don't). Is there a way to 'switch off' or 'disconnect' the Employees instances so that an attempt to access any property or related object that's not already populated will raise an exception? If not, then I assume that since this must be a common requirement, there might be an already-established pattern for doing this sort of thing?

  Read the article

• How do I get ASP.NET login status controls to display a Log In option?

  - by Greg McNulty

  I have the following log in status controls on the top of my master page. It displays the logged in as, manager log in, and Log out options. However, when a user is not logged in, there is nothing displayed there. When the user is NOT logged in, is there a way to display a "Login" text link that takes you to the log in page and then "disappears" once the user is logged in? Any help is appreciated. Thanks! <asp:LoginName ID="LoginName1" runat="server" FormatString="Logged in as {0}" ForeColor="Aqua" /> <asp:LoginView ID="LoginView1" runat="server"> <RoleGroups> <asp:RoleGroup Roles="Managers"> <ContentTemplate> <asp:HyperLink ID="HyperLink1" runat="server" NavigateUrl="~/Management/management.aspx">Manage Site</asp:HyperLink> or <asp:LoginStatus id="LoginStatus1" runat="server" /> </ContentTemplate> </asp:RoleGroup> </RoleGroups> <LoggedInTemplate> (<asp:LoginStatus id="LoginStatus1" runat="server" />) </LoggedInTemplate> </asp:LoginView> ASP.NET 3.5 VWD 2008 C#

  Read the article

• setlocale to fr-FR in PHP and number formatting

  - by bateman_ap

  Hi, I am trying to create a French version of one of my sites. I have set setlocale(LC_ALL, 'fr_FR'); at the top of my page, and using strftime I am displaying dates correctly in the French style. However I am having some problems with a number. Part of the page uses data I am getting from a Web Service. I am assigning a returned value to a var like this: $overallRating = $returnArray['Overall']; I am then using the following code later to format it to 1 decimal place number_format($overallRating,1) In the English version the overallRating value might be 7.5 and returns a value such as 7.5 (the reason for running it through the number_format is if it returns 7 I want it to display 7.0) However in the French version if I print out the raw $overallRating value I get 7,5 which looks like it has translated it into french. This would be fine but if I run it through number_format I get the error: Notice: A non well formed numeric value encountered in /sites/index.php on line 250 Line 250 is the number_format line I presume the translation to 7,5 is messing it up, but not sure how to solve this... Using PHP 5.3 in case there is anything new that helps me

  Read the article

• Debian packaging of a Python package.

  - by chrisdew

  I need to write (or find) a script to create a Debian package (using python-support) from a Python package. The Python package will be pure Python (no C extensions). The Python package (for testing purposes) will just be a directory with an empty __init__.py file and a single Python module, package_test.py. The packaging script must use python-support to provide the correct bytecode for possible multiple installations of Python on a target platform. (i.e. v2.5 and v2.6 on Ubuntu Jaunty.) Most advice I find while googling are just examples nasty hacks that don't even use python-support or python-central. I have so far spent hours researching this, and the best I can come up with is to hack around the script from an existing open source project - but I don't know which bits are required for what I'm doing. Has anyone here made a Debian package out of a Python package in a reasonably non-hacky way? I'm starting to think that it will take me more than a week to go from no knowledge of Debian packaging and python-support to getting a working script. How long has it taken others? Any advice? Chris.

  Read the article

• Spring bean's DESTROY-METHOD attribute and web-application "prototype"d bean

  - by EugeneP

  Can get work the attribute "destroy-method". First, even if I type non-existing method name into "destroy-method" attribute, Spring initialization completes fine (already strange!). Next, when a bean has a "prototype" scope, then I suppose it must be destroyed before the application is closed. That not happens, it is simply never called in my case. Though, after extracting this bean I can call this method explicitly and it does its job. Could you explain why this method is never called in my Spring 2.5 case? p.s. The method exists, it is public and has no arguments. It seems to be a more difficult task then I thought. The problem is that this destroy method is called whenever the context is closed, and this is a rare case. My question is this: I have a web app. I have a "prototype"-scoped bean. What I need is when the current session is closed, this destroy method was automatically called by Spring. I can do it by hand, but is there any solution how to make Spring do this job? It destroys the bean after the session is destroyed, it might be possible for Spring to call a method on that bean before destroying it?

  Read the article

• Eclipse CDT: cannot debug or terminate application

  - by Paul Lammertsma

  I have Eclipse set up fairly nicely to run the G++ compiler through Cygwin. Even the character encoding is set up correctly! There still seems to be something wrong with my configuration: I can't debug. The pause button in the debug view is simply disabled, and no threads appear in my application tree. It seems that gdb is simply not communicating with Eclipse. Presently, I have the debug settings as follows: Debugger: "Cygwin gdb Debugger" GDB debugger: gdb GDB command file: .gdbinit Protocol: Default I should mention here that I have no idea what .gdbinit does; in my project it is merely an empty file. What is wrong with my configuration? Debugging When attempting to terminate the application in debug mode, Eclipse displays the following error: Target request failed: failed to interrupt. I can't kill the process, either; I have to kill its parent gdb.exe, which in turn kills my application. Running When running it normally, a bunch of kill.exes are called, doing nothing, while Eclipse displays the following error: Terminate failed. I can kill FaceDetector.exe from the task manager. Process Explorer This is what it looks like in Process Explorer (debugging left, running right):

  Read the article

• How to override the default init.tcl

  - by Sean Murphy

  I'm working on a project where I want to make use of TCL as the command interpreter. I have a working c library object which I can load from within the tcl shell but my problem is finding a way to automatically do this while starting a tclsh. Essentially my ultimate goal is to be able to run a script and have it load my library and run some initial startup tcl code before dropping me back to the tclsh command prompt in interactive mode. e.g. tclsh -f myscript.tcl --then-switch-to-interactive or EXPORT TCLINIT=myscript.tcl tclsh The basic goal is to avoid having to distribute tclsh but rather rely in local user installations of tcl. All I would like to distribute is my library, a startup script and a shell command to launch the tclsh with the library preloaded. I've tried using the environment variables TCLINIT and TCL_LIBRARY but they seem to have no effect. The only workable solutions I've found so far are to add "source myscript.tcl" to either the end of /usr/share/tcltk/tcl8.5.init.tcl or ~/.tclshrc However both of these "solutions" are non perfect as they require modification of the default users workspace. It strikes me that there must be a way to handle this in TCL, but my research so far hasn't yielded anything. Does anyone have any suggestions?

  Read the article

• Posting forms to a 404 + HttpHandler in IIS7: why has all POST data gone missing?

  - by Rahul

  OK, this might sound a bit confusing and complicated, so bear with me. We've written a framework that allows us to define friendly URLs. If you surf to any arbitrary URL, IIS tries to display a 404 error (or, in some cases, 403;14 or 405). However, IIS is set up so that anything directed to those specific errors is sent to an .aspx file. This allows us to implement an HttpHandler to handle the request and do stuff, which involves finding the an associated template and then executing whatever's associated with it. Now, this all works in IIS 5 and 6 and, to an extent, on IIS7 - but for one catch, which happens when you post a form. See, when you post a form to a non-existent URL, IIS says "ah, but that url doesn't exist" and throws a 405 "method not allowed" error. Since we're telling IIS to redirect those errors to our .aspx page and therefore handling it with our HttpHandler, this normally isn't a problem. But as of IIS7, all POST information has gone missing after being redirected to the 405. And so you can no longer do the most trivial of things involving forms. To solve this we've tried using a HttpModule, which preserves POST data but appears to not have an initialized Session at the right time (when it's needed). We also tried using a HttpModule for all requests, not just the missing requests that hit 404/403;14/405, but that means stuff like images, css, js etc are being handled by .NET code, which is terribly inefficient. Which brings me to the actual question: has anyone ever encountered this, and does anyone have any advice or know what to do to get things working again? So far someone has suggested using Microsoft's own URL Rewriting module. Would this help solve our problem? Thanks.

  Read the article

• Free tools/libraries to compare tables with filtering for SQL Server 2008 and visualize/sync diffs t

  - by MicMit

  I am building certain GUI in C# for a content manager and looking for the tools or code snippets or open libraries ( code ideally in C# ) which allow me the following : 1. For table A in database X (test ) and table A in database Y (production) and for a simple filter ( e.g. listname = "XYZ" ) I need to show additions/deletions/updates in some way. which might be side-by-side or just html report 2 record added html table with some fields 2 record deleted html table with some fields Considering that this task is very common, I guess, certain components should exist ? Components either return some collections from parameters given for further visualizing or just produce reports mentioned above. 2. I need to push changes for the filter I mentioned in 1 and update table in production database for this filter only ( ie for the particular list approved by content person). Again probably there are certain SQL code generators - components in addition to diffs or standalone. 3. The key thing tools/libraries - should be suitable for integration with the existing application in C#.

  Read the article

• twisted deferred/callbacks and asynchronous execution

  - by NetSkay

  hey guys, quick question about twisted and python... im trying to figure out how can i make my code more asynchronous using twisted and ive come to sort of a dead end, if a function of mine returns a deferred object, then i add a list of callbacks, the first callback will be called after the deferred function provides some result through deferred_obj.callback, then, in the chain of callbacks, the first callback will do something with the data and call the second callback and etc. however chained callbacks will not be considered asynchronous because they're chained and the event loop will keep firing each one of them concurrently until there is no more, right? however, if i have a deferred object, and i attach as its callback the deferred_obj.callback as in d.addCallback(deferred_obj.callback) then this will be considered asynchronous, because the deferred_obj is waiting for the data, and then the method that will pass the data is waiting on data as well, however once i d.callback 'd' object processes the data then it call deferred_obj.callback however since this object is deferred, unlike the case of chained callbacks, it will execute asynchronously... correct? meaning chained callbacks are NOT asynchronous while chained deferreds are, correct? thank you PS: assuming all of my code is non-blocking

  Read the article

< Previous Page | 800 801 802 803 804 805 806 807 808 809 810 811  | Next Page >