Search Results

Search found 24209 results on 969 pages for 'site'.

Page 805/969 | < Previous Page | 801 802 803 804 805 806 807 808 809 810 811 812  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• HTTP Upload Problems

  - by jfoster

  We are running a marketplace on ColdFusion8 and IIS with a widely geographically distributed user base and have been receiving complaints of issues with some HTTP uploads. Most of the complaints are coming from geographically distant locations from our main datacenter on the US east coast. I've attempted to upload the same 70MB file from a US West coast test server to both our main site and a backup running the same code on a different network route and I saw the same issues fairly consistently in both places, so I've ruled out the code, route, and internal network errors. I've also tested uploads using both the native cf upload tag and a third party tool called SaFileUp. I saw the same issues with both upload tools, so I also don't think this is necessarily a ColdFusion problem. I don't have any problems uploading the test file from the East coast to other east coast servers, so I'm beginning to think that the distance between our users and our equipment is a factor. I've also found that smaller files are more likely to succeed than large ones (< 10MB) I tried the test upload with both IE and FF and did notice a difference in the way that the browsers seemed to handle packet errors. IE seemed to have a tough time continuing an upload after dropped / bad packets, whereas FF seemed to have the ability to gracefully resume an upload after experiencing packet problems. Has anyone experienced similar issues? Is there anything we can do on our side to make uploads more forgiving to packet loss or resumable after an error? A different upload tool etc… Do we need upload servers in more than one location to shorten the network routes between clients and servers? Does anyone think that switching uploads to SSL will help (no layer7 packet sniffing may lead to a smoother upload). Thanks.

  Read the article

• New Windows Server 2008 R2 WIMP running slower than Windows Server 2003

  - by starshine531

  We recently upgraded a WIMP server from Windows Server 2003 (32 bit) to Windows Server 2008 R2 (64 bit). The new server has significantly better hardware than the old server, yet many processes take much longer than the old box. We have a rather complex web application process that normally takes about 7 seconds on the old box, but on the new one it takes 11-12 seconds. That's down from 15.5 seconds it took before I disabled IPV6. This process involves some queries (some of them involve transactions with maybe 3 queries between the start and commit) and creating and emailing some pdfs. Windows updates are current with a more or less fresh machine. This happens consistently even when we have almost no traffic on the site and memory and cpu aren't being hard pressed at all. The only differences between the servers other than the OS and hardware: 1) When available, we used 64 bit versions of programs 2) The new server uses MySQL 5.5 rather than MySQL 5.1 (I did run the mysql_upgrade program and we use InnoDB for the engine) 3) The new server uses PHP Version 5.3.18 rather than PHP Version 5.3.1 4) With the new OS came IIS7 rather than IIS6 of course. What could be causing better hardware to run so much slower? Let me know if you need more details. Thank you.

  Read the article

• IIS running but not serving content

  - by Kyle

  I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

  Read the article

• SQL 2000 Backup/Export Process - Can't find SQL 2000 Enterprise Manager, Can't use Mgmt Studio Expre

  - by 1nsane

  I need to make a backup of a client's SQL 2000 database, however there are a few issues preventing me from doing so using the traditional methods. I've tried using SQL Management Studio Express, but the host doesn't give sufficient privileges to create a backup and I'm getting some strange error messages. I've also tried doing the "Generate Scripts" to recreate the schema, then using the DTS Wizard to migrate the data, but the IDs set up with the identity specification property are not consistent with the live database once copied over. This results in some foreign key breakage... If I remember correctly, I was able to use Microsoft SQL 2000 Enterprise Manager to perform the task before, but I can't find this anywhere... it seems Microsoft has pulled most SQL Server 2000 stuff from their site. Does anyone know where I can find a copy of Enterprise Manager (or a trial of SQL Server 2000, which I believe comes with the component)? Or conversely, does anyone know of any other tools (preferably non-commercial) that are capable of mirroring remote SQL Server 2000 DBs? Thanks!

  Read the article

• Obey server_name in Nginx

  - by pascal

  I want nginx/0.7.6 (on debian, i.e. with config files in /etc/nginx/sites-enabled/) to serve a site on exactly one subdomain (indicated by the Host header) and nothing on all others. But it staunchly ignores my server_name settings?! In sites-enabled/sub.domain: server { listen 80; server_name sub.domain; location / { … } } Adding a sites-enabled/00-default with server { listen 80; return 444; } Does nothing (I guess it just matches requests with no Host?) server { listen 80; server_name *.domain; return 444; } Does prevent Host: domain requests from giving results for Host: sub.domain, but still treats Host: arbitrary as Host: sub-domain. The, to my eyes, obvious solution isn't accepted: server { listen 80; server_name *; return 444; } Neither is server { listen 80 default_server; return 444; } Since order seems to be important: renaming 00-default to zz-default, which, if sorted, places it last, doesn't change anything. But debian's main config just includes *, so I guess they could be included in some arbitrary file-system defined order? This returns no content when Host: is not sub.domain as expected, but still returns the content when Host is completely missing. I thought the first block should handle exactly that case!? Is it because it's the first block? server { listen 80; return 444; } server { listen 80; server_name ~^.*$; return 444; }

  Read the article

• Configure J2EE Agent with OpenAM behind Reverse Proxy

  - by Troy

  I have a reverse proxy with two SSL enabled NamedVirtualHosts on different ports. Both containers on each internal host is GF 2.1.1. Proxy configuration as follows: Proxy URL -> Internal URL https://apps.mydomain.com -> http://apps.internal.com https://secure.otherdomain.com:8080/ -> http://secure.internal.com I initially tried configuring the J2EE agent in OpenAM and the web app container to use the internal URLs (I appended /openam and /agentapp respectively). However, I received the following errors when trying to access a secured application such as https://apps.mydomain.com/webapp. java.lang.RuntimeException: Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSOToken(): Unable to get Application SSO Token A second attempt gives the following error: java.lang.NoClassDefFoundError: Could not initialize class com.sun.identity.agents.filter.AmFilterManager Along with these in the agent debug.out: ERROR: Failed to obtain auth service url from server: null://null:null ... SiteMonitor: Site URL http://secure.internal.com/openam/namingservice is not available. If I specify the server and agent urls using the proxy urls, then the agent appears to be working and I am redirected to the OpenAM login page. However, the goto in the URL is http://apps.mydomain.com/webapp instead of https://apps.mydomain.com/webapp (missing https). So after authentication, the redirect fails. Now I could possibly get by with mod_rewrite, but it feels hackish and I really want to know what's going on. Any ideas?

  Read the article

• Programmatically add/delete users in Exchange

  - by Terry Gamble

  I've got the following set up: ASP.Net site that allows my internal employees to add in new hire information (no secure data, just stuff like name/address/phone) and when they submit this it goes into a database (SQL). Every few minutes a service runs that checks the database and if there are new entries it will add them into Exchange. The issue is I'm not happy with the way the service is doing things, (It's not putting address, etc in it). As I don't have the source code this I'm thinking of recreating it. My issue though is finding a starting point even. I know I'll have to create the scripts through code where the data is retrieved from SQL : Joe Smith 123 Main Street Nowhere, USA 19999 And put that into a powershell cmdlet (not sure exactly the syntax but I can get that figured out unless someone already has it) where the user is created in the Active Directory as a normal user and the mailbox is created simultaneously. From there I just need to fill out fields in Active Directory with the person's address, etc. Finally a deletion routine for when we terminate someone, however I'm sure that it will simply be a cmdlet that is easily shelled out to much like the initial one is, once I can figure out how to start that... Anyone have some good reference points or have already done it and can share?

  Read the article

• When to use Truecrypt, and when not to?

  - by tm77

  I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

  Read the article

• How to configure TFTPD32 to ignore non PXE DHCP requests?

  - by Ingmar Hupp

  I want to give our Windows guy a way of easily PXE booting machines for deployment by plugging his laptop into one of our site networks. I've set up a TFTPD32 configuration which does just that, and our normal DHCP server ignores the PXE DHCP requests due to them having some magic flag, so this part works as desired. However I'm not sure how to configure TFTPD32 to only respond to PXE DHCP requests (the ones with the magic flag) and ignore all normal DHCP requests (so that the production machines don't get a non-routed address from the PXE server). How do I configured TFTPD32 to ignore these non-PXE DHCP requests? Or if it can't, is there another equally easy to use piece of software that he can run on his Windows laptop? Since the TFTPD part is working fine, a DHCP server with the ability to serve PXE only would do. Worst case I'll have to set up a virtual machine with all this, but I'd much prefer a small, simple solution. I'm not interested in solutions that involve using the existing DHCP servers or separating machines on the network for deployment, the whole point is to be simple and stand-alone.

  Read the article

• Terminating multi-mode fiber

  - by murisonc

  I'm looking at the feasibility of terminating multi-mode fiber connections ourselves. We would be using LC connectors. I've done some research and found two different methods. One requires polishing the ends and using epoxy while the other doesn't. I like the idea of not having to polish the ends but there doesn't seem to be much information on quality or ease of use. I've found two vendors (3M and Corning) that offer kits for terminating fiber without polishing or using epoxy. Does anyone have any experience with both methods that can offer some advice? Copper is easy but fiber seems to be a whole different animal. EDIT: After looking into fusion splicing suggested in the answer I've determined it's not for us. It's my understanding that is primarily used for outside plant and is better suited for single mode fiber. It's a good answer but doesn't address the question directly. Some more information about our situation. We will only be terminating multi-mode fiber inside a building and only doing between 4 and 20 pair a year. Hiring an outside person won't work due to our location. There are currently a couple people on-site that can terminate fiber (working for another company and charging large fees) but they can only do ST and SC connectors and we only use LC. So once again does anyone have experience with terminating using both epoxy type connectors and the other type (similar to Corning Unicam)?

  Read the article

• nginx not serving admin static files?

  - by toto_tico

  First, I want to clarify that this error is just for the admin static files. This means my problem is specific just to the static files that corresponds to the Django admin. The rest of the static files are working perfect. Basically my problem is that for some reason I cannot access those admin static files with the ngix server. It works perfect with the micro server of Django and the collect static is doing its job. This means it is putting the files on the expected place in the static folder. The urls are correct but I cannot even access the admin static files directly, but the others I can. So, for example, I am able to access this url (copying it in the browser): myserver.com:8080/static/css/base/base.css but i am not able to access this other url (copying it in the browser): myserver.com:8080/static/admin/css/admin.css I also tried to copy the admin/ directory structure into other_admin_directory_name/. Then I can access myserver.com:8080/static/other_admin_directory_name/css/admin.css Then, it works. So, I checked permissions and everything is fine. I tried to change ADMIN_MEDIA_PREFIX = '/static/admin/' to ADMIN_MEDIA_PREFIX = '/static/other_admin_directory_name/', it doesn't work. This a mistery in itself that I am exploring but still no luck. Finally, and it seems to be an important clue: I tried to copy the admin/ directory structure into admin_and_then_any_suffix/. Then I cannot access myserver.com:8080/static/admin_and_then_any_suffix//css/admin.css So, if the name of the directory starts with admin (for example administration or admin2) it doesn't work. * added thanks to sarnold observation ** the problem seems to be in the nginx configuration file /etc/nginx/sites-available/mysite location /static/admin { alias /home/vl3/.virtualenvs/vl3/lib/python2.7/site-packages/django/contrib/admin/media/; }

  Read the article

• File sharing for small, distributed, non-technical, non-profit organization?

  - by mnmldave

  Problem: I've started volunteering for a small non-profit with fewer than five non-technical Windows users who need to share 20-30GB of files (Office documents, images, PDFs, etc.) amongst themselves online. Background: The users are accustomed to a Windows network share on a machine that backed up their data locally. An on-site "disaster" has forced them to work from their homes for awhile and to re-evaluate their file sharing needs (office was located in an old building with obvious electrical issues, etc.). Access to time from volunteers with IT experience seems to be difficult. Demonstrably minimizing energy consumption is a nice-to-have. I'm currently considering Jungle Disk (a Desktop account shared amongst the handful of employees since their TOS and my inquiries to their helpdesk seem to indicate this is permissible). It appears easy-to-use, inexpensive, secure, has backup functionality, and can scale to accomodate more data when needed. I've not used it myself though (have only used Dropbox for personal use) and systems isn't my area of expertise, so am worried I might be jumping on a bandwagon. That said, any suggestions, thoughts or similar experiences would be really appreciated.

  Read the article

• Why is squid breaking kerberos/NTLM auth?

  - by DonEstefan

  I'm using squid 2.6.22 (Centos 5 Default) as a proxy. Squid seems to break the authentication process for web pages when they require NTLM or Kerberos Auth. I tested with sharepoint 2007 and tried all 3 authentication methods (NTLM, Kerberos, Basic). Accessing the site without squid works in all cases. When I access the same page with squid, then only basic-auth works. Using IE or Firefox desn't make any difference. Squid itself can be used by anybody (no auth_param configured). Its a bit tricky to find solutions online, since most of the topics whirl around auth_param for authenticating users to squid rather than authenticating users to a webpage behind squid. Could anyone help? Edit: Sorry, but my first test was totally screwed up. I tested against the wrong webservers (Memo to myself: always check assumptions before testing). Now I realized that the problem scenario is completely different. Kerberos work for IE Kerberos works for Firefox (after changing "network.negotiate-auth.trusted-uris" in about:config) NTLM works for IE NTLM does NOT work in Firefox (even after changing "network.automatic-ntlm-auth.trusted-uris" in about:config) By the way: The feature that provides NTLM-passthrough in squid is called "connection pinning" and the HTTP header "Proxy-support: Session-based-authentication""

  Read the article

• IIS 7 URL Rewrite to GeoServer running on Apache

  - by Maxim Zaslavsky

  I'm building a mapping application based on OpenLayers that uses GeoServer to serve up mapping data. The problem I'm having is that besides the map images I'm requesting through WMS, I'm using jQuery AJAX to get information from GeoServer. As GeoServer is running on a different port, my requests are being blocked due to cross-site scripting security policies in JavaScript. As a Java application, GeoServer runs on Apache on port 8080, while my IIS instance is running on port 80. Instead of building a proxy, I've decided to use URL Rewriting in IIS7 to fix this problem. I'm following this guide, but it's still not working. Here are my URL Rewrite rule settings: Matches URL: (.*) Condition: {HTTP_URL} matching /geoserver Action: rewrite to http://localhost:8080/{R:1}, appending query string When I request http://localhost/geoserver/wms?QUERY_LAYERS=SanDiego:FWSA_sandiego&LAYERS=SanDiego:FWSA_sandiego&SERVICE=WMS&VERSION=1.1.1&FEATURE_COUNT=20&REQUEST=GetFeatureInfo&EXCEPTIONS=application/vnd.ogc.se_xml&BBOX=-13009123.590156,3862057.2905992,-13006066.109025,3865114.7717302&INFO_FORMAT=text/html&x=20&y=20&width=40&height=40&srs=EPSG:900913, however, all I get is a 404, although the same request on port 8080 returns the proper result. What am I doing wrong? Thanks in advance.

  Read the article

• How to create custom content for nginx error 502 page, keep origin url on browser

  - by user123862

  i'm trying to get custom language and message for nginx error page but keep url on browser.. not success for eg: i go to url : xaluan.com/aaa/bbb.html on the time server down.. nginx will show error 502. with the same url but custom message as my language. test 1. I created a custom page at /usr/local/nginx/html/205.html as following config but it show on web site when error is default nginx error at domain.com/50.html ( the content of webpage not same as i created) error_page 502 /502.html; location = /502.html { root /usr/local/nginx/html; } test 2. Then i create same page at my www domain folder /home/xaluano/public_html/502.html but this keep redirect me to root domain.com/502.html the content now same as i created. but.. the url still not as i need error_page 502 /502.html; location = /502.html { root /home/xaluano/public_html; internal; } EDIT UPDATE for more detail 10/06/2012 please download my nginx config http://pastebin.com/7iLD6WQq and vhost config following: http://pastebin.com/ZZ91KiY6 == the case test.. if apache httpd service stop: #service httpd stop then open browser go to: xaluan.com/modules.php?name=News&file=article&sid=123456 I will see the 502 error with the same url on browser address == Custome error page I need the config which help when apache fail .. will show the custom message tell user wail for 1 minute for service back then refress current page with same url ( refresh I can do easy by javascript ), Nginx dosent change url so java-script can work out. any help will be great.. thank in advance

  Read the article

• How to add URL's to wiki (MediaWiki) powered documentation?

  - by Ian Boyd

  We have an internal company wiki. The wiki engine being used is MediaWiki, the wiki engine that runs Wikipedia. Some of it contains IT stuff. One of the things i want want to have are hyperlinks to the various virtual machines. An example of a command, as it needs to run, is: vmrc://solo.avatopia.com:5901/Windows 2000 Server My first thought was to convert the URL into a link: [vmrc://solo.avatopia.com:5901/Windows 2000 Server] But the content renders literally as above: with the square brackets and all. Testing with other URL protocols: [http://solo.avatopia.com] [ftp://solo.avatopia.com] [ldap://solo.avatopia.com] [vmrc://solo.avatopia.com] Only the first two work, and are converted to hyperlinks. The other two remain as liternal text. How can i add URLs to MediaWiki powered documentation? Original Question We have an internal company wiki. The wiki engine being used is MediaWiki, the wiki engine that runs Wikipedia. Some of it contains IT stuff. One of the things i want want to have are hyperlinks to the various virtual machines. An example of a command, as it needs to run, is: \\solo\VMRC Client\vmrc.exe solo.avatopia.com:5901/Windows 2000 Server If launching from a command prompt, you have to quote the spaces: C:\>"\\solo\VMRC Client\vmrc.exe" solo.avatopia.com:5901/"Windows 2000 Server" My first thought in converting the above for use on our wiki-site, is to simply HTML-ify it: file://\\solo\VMRC Client\vmrc.exe solo.avatopia.com:5901/&quot;Windows 2000 Server&quot; but MediaWiki only converts file://\solo\VMRC to a hyperlink, the remainder is text. i've tried other random things, including enclosing the URL in square brackets. What is the correct answer? i don't want to happen to randomly stumble on some format that happens to work today, and breaks in the future.

  Read the article

• USB Mouse and Keyboard not working in Linux 4 Tegra

  - by Sijo

  I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

  Read the article

• Wordpress Directory Permission to allow uploads, plugin folders, etc

  - by user1015958

  I have a wordpress pre-made site which were developed on my localmachine, and i uploaded it too a vps running on debian6, using nginx, mysql, php. Following this guide: 1) Create an unprivilaged user, this could be say 'karl' or whatever, and make them belong to the www-data group. So that if I were to login as karl and create a web root in say /home/karl/www/ , all the files will be owned by karl:www-data 2) Set up nginx as the user www-data in nginx.conf 3) Set up PHP-FPM to run as www-data 4) Place your files in /home/karl/www/[domain name maybe]/public_html/, upload as 'karl' so you don't have to chown everything again. when i type ls -l inside public_html/ it shows that all the files inside are owned by karl:karl. But the public_html directory is owned by karl:www-data. I chmod 0755 the folder wp-content but i still get the error: ERROR: Path ../wp-content/connection_images does not seem to be writeable. I know i shouldn't set it too 777 due to security reason, how should i set it too proper permission? and what should i set also to allow my users to upload,write posts,edit articles? Sorry for my english by the way.

  Read the article

• Unable to activate Windows XP

  - by Josh Kelley

  The latest round of Patch Tuesday updates left my Windows XP computer unbootable. ("Fatal System Error: The Windows Logon Process system process terminated unexpectedly.") After much messing around with the recovery console, an XP CD's repair mode, and manually copying registry files around, I have a system that can boot again. However, I overwrote my OEM XP installation's activation information while trying to run a retail XP CD's setup, so it needs reactivation. Here's my problem: I cannot activate it at all. I log in, Windows tells me I have to activate to continue, I click Yes, and absolutely nothing happens: no windows, no response to keyboard or mouse, no response to Ctrl-Alt-Del, nothing. Safe mode works, but I can't activate in safe mode (EDIT: not even safe mode with networking). I read a trick online of pressing [Windows Key]+U to bring up the Microsoft Narrator, and that works, but clicking its Microsoft Web Site link does nothing. My last attempt to resolve this was to reinstall Windows off of the OEM CD. Now I have two parallel Windows installations, both on the same hard drive, one with all of my stuff and no way to activate it, one fully activated with no usable programs. Any ideas? Any way to activate in safe mode? Any way to copy activation information from my activated installation to my unactivated installation (since they're both on the same hard drive)?

  Read the article

• Windows SBS 2008 problem

  - by MadBoy

  I was today on clients site that has Windows 2008 SBS installed with Symantec EndPoint Protection. Problem is that after I logged in tried multiple commands like services.msc, msconfig typed in "Run" but nothing was started. For the first 5 minutes i can click around Start Menu, choose some applications (non microsoft works, even control panel works). But then something happens that I can't click where I want.. i can click on Start Menu and get it active but i cant choose anything from there, everything is like blocked, i can right click on Desktop i can do many things but most of the left clicks is blocked. Even when i start TaskMgr i am able to see it but I cannot click it, can't activate it or anything. It acts very very weird. It's newly installed system, with less then a month of when it was installed and it wasn't really used (been down most of the time). I suspect Symantec EndPoint protection might be faulty so when I go back there (Wednesday) I will uninstall it but maybe someone else have some ideas what may be happening. I doubt there's any virus or anything, symantec was installed right after setting everything up and running.

  Read the article

• Python coding with VLC player (quite a basic query I expect)

  - by Todd

  I'm fairly new to the whole coding realm so my knowledge is fairly limited, and I can't seem to find any basic tutorials on how to use scripts with VLC player. More specifically, the reason I'm asking here is because I stumbled across a post on this site about playing random clips from random videos on VLC player automatically. This is the forum post: Playback random section from multiple videos changing every 5 minutes My situation is similar to this lovely gentleman's was, though he clearly knows a lot more about coding than I do. In short, I'd like to copy this coding into a file of some sort and apply it to VLC player myself. Only I'm not sure what file type I'd have to save it as (I have Python by the way, and I tried saving it as a .py file but I didn't know if it was correct or where to go from there). Additionally, I'm not sure how to get VLC to "read" the script, so to speak - is there a specific location the file needs to be, and do I run the script from another program or through VLC? I'll reiterate that I'm relatively new to this, so if anybody would be so kind as to post a quick list of steps on how to save/place the file and use it with VLC player I really would appreciate it! P.S. I'm not computer illiterate, I'm fine with most programs and I'd understand if you just said things like "C:\Program Files (x86)\VideoLAN\VLC\plugins" or "in VLC, select Tools Plugins and extensions", I just wouldn't catch on to anything about adding a line of coding that does something without being told exactly what to write! Many thanks in advance! :) Todd

  Read the article

• Intermittent CNAME forwarding

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. At all times, I can connect to my website through the no-ip domain without issue. For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of today, however, the GoDaddy domain only works for about 10 minutes at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have attempted to run tests using a couple of online DNS check websites, but have not gotten any errors at any time. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. I would like advice on how I could debug/resolve this issue. Since the problem appeared without me changing anything on my end, I hope it will resolve itself, but knowing the cause in case it happens again would be preferable. EDIT: I changed the configuration in GoDaddy to create an A (Host) that points at my current IP. This works fine, so I can access the site through the GoDaddy domain without the preceding www. I am currently waiting for a new CNAME record to propagate that points the www subdomain at the main host, rather than my no-ip domain.

  Read the article

• Apache process consuming all memory on the server

  - by jemmille

  I have an apache process that suddenly appears on a particular server. When it shows up it starts consuming memory at a very rapid rate, then moves on to all the swap. In all it consumes about 11GB (including swap) of memory and the server eventually becomes unresponsive. The load on the server is under 1 at all other times. The process runs as nobody and I am having a hard time tracking down the source. If i run an strace on the process and all it did was continuously dump out mprotect over and over again If i run lsof -p <pid>, I get this, but only sometimes: httpd 19229 nobody 152u IPv4 175050 crawl-66-249-67-216.googlebot.com:62336 (CLOSE_WAIT) httpd 19229 nobody 153u IPv4 179104 crawl-66-249-71-167.googlebot.com:58012 (ESTABLISHED) As long as I catch it, I can kill the process and the server almost immediately stabilizes. I have on site on the server that is getting a few thousand hits a a day that I think might be the source, but I still can't find the exact reason. Also, this is a cPanel server and I have upcp'd the server, rebuilt apache with easy apache, and rebuilt httpd.conf. It is not spawing any related processes, meaning I can find any php, mysql, cgi, etc. processes that relate to this process. It's just a loner process that balloons fast and consumes ever last MB of memory. This is on a XenServer 5.6 based VM. No other servers in the cluster are having this issue.

  Read the article

• PORT FORWARDING TO PUT MY WEB SERVER ON THE INTERNET

  - by Chadworthington

  I went to http://canyouseeme.org/ to check to see what my external IP address. Regardless of what port I enter, it tells me that the port is blocked. I have a LinkSys router that basically has the default settings with the exception that I have WEP encrptin setup and I have forwarded a few ports, including 80 and 69. I forwarded them to the 192.x.x.103 IP address of the PC which is running IIS. That PC runs Symantec Endpoint Protection, which I right mouse clicked in the tray to Disable. These steps used to make my PC visible so I could host my own web site in IIS on port 80, or some other port, like 69. Yet, the Open Port tool cannot see my IP when it checks eiether port and when I navigate to http://my external ip/ I get "page cant be displayed" At first I was thinking that maybe Comcast is blocking port 80, but 69 doesnt work eiether. I do not see any other blockking set up in my router and, as I mentioned, I went with teh defaults except where discussed. This is a corporate PC and Symantec End Point Protecion is new to it (this previously worked on teh same PC with Symantec Protection Agent), but I thought that disabling Sym End Pt from the tray, that that would effectively neutralize it. I do not have the rights to kill the program itself. Any suggestions on what else to try to make my PC externally visible?

  Read the article

< Previous Page | 801 802 803 804 805 806 807 808 809 810 811 812  | Next Page >