Search Results

Search found 33247 results on 1330 pages for 'anonymous access'.

Page 807/1330 | < Previous Page | 803 804 805 806 807 808 809 810 811 812 813 814  | Next Page >

• Windows 7 Firewall configuration

  - by Will Calderwood

  I had a PC set up with a VPN. I used the Windows 7 firewall to block all NON-VPN traffic to the internet, but all LAN traffic was allowed. So, with the VPN connected I could connect to all networked machines and the internet. Without the VPN connected I could only connect to the LAN and had no internet access. Unfortunately my drive failed, and I'm setting up the machine again with a replacement drive. I can't for the life of me work out how to set up the firewall again. I can easily set it up to block all NON-VPN traffic, but can't work out how to that and still allow all LAN traffic whether the VPN is connected or not. Some pointers would be useful. Thanks.

  Read the article

• Sending mail to local address crashes web server (sendmail)

  - by deceze

  When trying to send mail automatically from a script at example.com via PHP's mail() to [email protected], the Apache server throws an Internal Error. I believe internally it is configured to use sendmail. The message gets dropped into ~/dead.letter and the general error log reads: [Wed May 12 11:26:45 2010] [error] [client xxx.xxx.xxx.xxx] malformed header from script. Bad header=/home/example/dead.letter... S: /home/example/www/test.php Trying any other address, not @example.com, works just fine. I have googled and serverfaulted for solutions, but they all require to edit configuration files in /etc/mail and similar system places, which is not an option, since this problem occurs on a shared host in which I only have access to ~/. Does anyone have a suggestion?

  Read the article

• Backup media manager, library or similar reference application

  - by Tarnschaf

  I'm looking for a backup media manager that will keep me up-to-date on where my backups are, how they're stored and what's stored on them. I want it to be able to do and keep track of the following: my used backup media (e.g. DVD1, DVD2) my backed-up assets in high-level (such as "family-photos from 2003", "laptop drivers") details of the assets ("Ninas Birthday 2003") where the backup media is currently stored when the media has been burned (to re-burn in case of media degeneration). It should be possible to navigate back and forth between media and assets. I also thought about marking assets as "deprecated". If all assets on a media are deprecated, the program should tell me so I don't have to keep it any more. Does anyone know of a program with this feature-set? Or will I have to start my own reference in something like Access?

  Read the article

• Why is this static routing not working ?

  - by geeko

  Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

  Read the article

• How can I slightly delay the pop up of the task bar?

  - by Xavierjazz

  Windows XP SP3 Many times as I head to the bottom of my desktop, I will slightly overshoot the target at the bottom and the task bar will pop up, hiding the target. I then have to move the cursor out of it so it retreats and then again try to access the target. Is there a way to add an interval, say, 1 second, to the task bar popping up so I can adjust to the target before the task bar covers it? EDIT: as per my answer below, "What I ended up doing is just docking it on the LH side of the screen. There is no change in response but I don't go to that location so often so it's much better.".

  Read the article

• Temp files created in every folder in Windows Server 2003

  - by i.h4d35

  So we have some folders which are shared over the AD Domain (Windows Server 2003). It was just noticed that in 2 of those folders (which contain only Excel and Word files), whenever a file is opened and closed, the temp file which was opened corresponding to that file still remains. Apparently, this's been going on for the past couple of years (which has led to an insane amount of temp files in each folder/subfolder under those shared folders). These shared folders are under the D:drive and not C: drive. There is only one group (containing 2 users) who access the said folders. I cannot understand if this has to do with the settings/permissions for the User/Group/Individual Client machine. For now, I have manually deleted all the temp files from each folder/subfolder. While this is not critical at the moment, I'd still like to clear this up. Also, it takes an additional fraction of a second to open folders that contains more than 10,000 temp files. Thanks in advance.

  Read the article

• Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

  - by Aglystas

  I'm attempting to set up NFS file sharing and keep getting the error mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount: sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set NFS priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS: volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• Disk image of a Windows 2000 NTFS hard drive

  - by Federico

  Hi, I need to create a disk image from a Windows 2000, NTFS formatted, hard drive. This image has to be used to create backup hard drives to replace the original disk in case an emergency situation arises. This is a medical equipment, so I cannot physically disconnect the disk because I would violate the warranty of the equipment. This machine has a DVD R/W, ethernet and USB 2.0 access, and we have the rights to install any application I want in the Windows 2000 system. 1) Is there any way to do this without installing any new software in the Windows 2000 system, so it is the least invasive as possible? 2) If we have to install a software to do the backup, which software do you recommend? Any hint will be greatly appreciated. Thanks in advance, Federico

  Read the article

• Domain and TS migration

  - by Windex

  The migration steps outlined by Microsoft in the ts migration seem to deal with moving TS to a different server on the same domain and call for adding the licensing service to another system, move the licenses and then put TS on whatever server you want. However with migrating the domain as well I don't have any place to move the TS server to. So my thought was to simply re-activate my licenses on the new server using the same method as a new TS setup. My question is essentially will this work the way I think it will or will the MS activation clearing house deny the new server? Is there a procedure to follow that "deactivates" the licenses on a server so that the clearing house knows there are some free? (FWIW I can look up the license information through the eopen website and have access to the original license doc.)

  Read the article

• apache server not working after installing zend server

  - by kamal

  i have apache installed in my redhat 5.3 server machine. and i was trying to install zend server. i installed zend server with install.sh file in directory /var/zend. in my windows machine after installling zend server community edition i was able to access apache server as well as zend server. but in my linux machine localhost displays nothing and localhost:10081 shows zend server. what can i do to run my localhost? or should i seperately install apache?

  Read the article

• Taking ownership of trustedinstaller files?

  - by P a u l

  vista32-sp1: I am unable to delete some files on my system that were installed with 'special permissions' by 'trustedinstaller'. I find the usual help suggestion to use 'takeown' is not working, all I get is access denied. I refuse to believe there isn't some way to delete these files, or that microsoft has finally acheived their perfect security filesystem. This is NOT a case of a file being locked by a process. If this is all it was, I could solve this by myself. I know there are some recommended unlocking programs and they might do some sort of file system trick, but I would like to know what my possible direct actions might be. If a 3rd party program can 'unlock' a file, I want to know the mechanism. But like I said 'takeown' at the command line is not working for this.

  Read the article

• Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

  - by John H

  mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

  Read the article

• Remotely connecting to a Hyper-V hosted VM's console.

  - by billpg

  Hi everyone. I've just managed to successfully move an aging beige box into a Hyper-V virtual machine. We used to use the beige box by walking over and sitting at the computer itself, but we can't do that so easily when its inside the Hyper-V system. Is there a way please to access the VM's console from a workstation running XP Pro? Please note that its an obscure OS running inside the VM, so installing a VNC or similar service inside the VM is not an option. Many thanks.

  Read the article

• Changes user's email on crowd doesn't apply in confluence

  - by donamir

  Hi It's my configuration: Atlassian Crowd Version: 2.0.2 (Build:#409 - 06-10-2009) Atlassian Confluence 3.0.2 I can't change users' emails in Confluence because I use Crowd as external user management. So I have to change users' emails in Crowd but changes doesn't apply in Confluence. Even users has access to crowd user console and can login to Crowd and view their profile and edit their email password but changed emails doesn't apply in Confluence. What should I do? Is it a bug? Also I should mention that emails contains dot character(.). I posted my question to Atlassian forum 3 days ago but there's no answer yet!

  Read the article

• How is this modsec rule getting triggered?

  - by BipedalShark

  I made a GET request to the URL, http://domain.tld/test/docs/index.php?create_table=1&step=2 and got a 403 response code. It turns out this modsec rule is getting triggered: Access denied with code 403 (phase 2). Pattern match "(?:ogg|gopher|zlib|(?:ht|f)tps?)\:/" at ARGS:gltr_redir. [file "/opt/mod_security/10_asl_rules.conf"] [line "827"] [id "340153"] [rev "22"] [msg "Generic PHP code injection protection via ARGS 3"] [severity "CRITICAL"] I would assume ARGS refers to GET/POST data, but there's no gltr_redir in the query string. And, being a GET request, there's obviously no POST data. So how is this rule being triggered?

  Read the article

• Can't find netbooted for Kerrighed pxe boot with Ubuntu Lucid Server

  - by Pengin

  I'm following installation guides for pxe booting and kerrighed. I can't find the package nfsbooted for Ubuntu 10.04. Where did it go? Context: At work I have access to 8 mini-ITX PCs and am trying to build a cluster. My plans include trying Condor, GridGain, Hadoop, and recently Kerrighed has caught my eye. (I reaslise these are all for different kinds of things, I'm just evaluating). Ideally, I'd like to have all the nodes network boot from a single server, since that seems so much easier to manage, plus I can 'borrow' additional PCs for a while without touching their HD. I've been getting on great with Ubuntu Lucid Server (10.04), trying to follow the only guides I can find to get pxe booting (and ultimately kerrighed) to work. This guide is for Ubuntu 8.04 and this one is for Debian. They both refer to a package I can't seem to find, nfsbooted. Has this package been replaced? Am I doing something daft?

  Read the article

• Copying a large directory tree locally? cp or rsync?

  - by Rory

  I have to copy a large directory tree, about 1.8 TB. It's all local. Out of habit I'd use rsync, however I wonder if there's much point, and if I should rather use cp. I'm worried about permissions and uid/gid, since they have to be preserved in the clopy (I know rsync does this). As well as thinks like symlinks. The destination is empty, so I don't have to worry about conditionally updating some files. It's all local disk access, so I don't have to worry about ssh or network. The reason I'd be tempted away from rsync, is because rsync might do more than I need. rsync checksums files. I don't need that, and am concerned that it might take longer than cp. So what do you reckon, rsync or cp?

  Read the article

• Where is the Plesk Error Log / Or how can I get Plesk running again?

  - by Josh Pennington

  I currently have a VPS that is running Plesk and for some unknown reason it will not start. All the more information it gives me about it not starting is the following: Operation start with the VPS(s) VEID54635644 service "psa" is finished with errors: #703 Can not start/stop/restart service: service "psa" status is not "running" after command "start". This does really mean anything to me. Currently my server provider does not seem interested in helping me get Plesk running again so I am hoping I can get this going again on my own. I am assuming that there has to be an error log SOMEWHERE for Plesk, but the only thing I can find is located at /usr/local/psa/admin/logs/httpds_access_log and that just looks like an access log, not an error log (it is the only file in the directory). Is there another log somewhere in the system for this that I do not know about? Is there a way to find out why Plesk did not start? Thanks Josh Pennington

  Read the article

• SSH and Active Directory authentication

  - by disserman

  Is it possible to set up Linux (and Solaris) SSH server to authenticate users in this way: i.e. user john is a member of the group Project1_Developers in the Active Directory. we have something on the server A (running Linux, the server has an access to the AD via i.e. LDAP) in the SSH server LDAP (or other module) authentication config like root=Project1_Developers,Company_NIX_Admins. when john connects to the server A using his username "john" and domain password, the server checks the john's group in the domain and if the group is "Project1_Developers" or "Company_NIX_Admins", makes him locally as a root with a root privileges. The idea is also to have only a "root" and a system users on the server, without adding user "john" to all servers where John can log in. Any help or the idea how to make the above or something similar to the above? Preferred using AD but any other similar solution is also possible. p.s. please don't open a discussions is it secure to login via ssh as root or not, thanks :)

  Read the article

• IIS exclude specific host?

  - by chakrit

  I have an IIS server running several websites. It is stationed behind an ISA server of which I do not have access. But I do have all of the defined websites (on port 80) routed to my server. So I want to take down one website, say it's foo.bar.com and in its place setup a LAMP server instead using a VM software. It needs to run alongside all the existing websites and it should not interfere with them. I have full control over my server, but not the ISA. Is this possible? If so, how? The OS is Win Server 2003 Standard with IIS6

  Read the article

• Convert windows media video stream to mp3 audio?

  - by Jared

  I'd like to take a windows media video stream and convert it to mp3 audio. Using mencoder I can convert from windows media video to avi but not directly from windows media to mp3. The following is the command I use to convert to avi, but I'd like to avoid having to do two conversions and converting the avi file to mp3. mencoder mms://wmslive.media.hinet.net/Weblive_Bloomberg_600 -ovc lavc -oac mp3lame -o output.avi Note if there are tools that can do this I will use them, I have access to both Linux and Windows.

  Read the article

• How to setup Database Permissions on SqlServer Express 2008

  - by Timo Willemsen

  I'm using a code-first approach of using the Entity Framework. When I first run the application it will try to create the database matching my MVC models. However, it doesn't have permission to create it I think. I get the following error: CREATE DATABASE permission denied in database 'master'. What user is trying to access the SqlServer and how can I add it's permissions to let it work? This is the connectionstring I'm using (which should be right...) <add name="ContextDb" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;initial catalog=ContextDb" providerName="System.Data.SqlClient"/> Cheers

  Read the article

• Using rsync to take backup of folder

  - by Ali

  Hi, I have a server (Linux) with NAS which is mounted as folder "mount" I have website in "public_html" folder. I want to take backup of website in mount folder automatically at certain intervals for e.g. every hour. I read that there is something called "rsync" which is used to make two folders sync. And it doesn't copy all files every time and instead matches if the file has been changed and then only update changed files. How do I use it to make automatic backups? I have root access to server. Thanks

  Read the article

• Browser with its own hosts file?

  - by Mystere Man

  I have a number of staging and test servers that I need to constantly modify my hosts file to access (they depend on the domain name, so i have to change the hosts file to get them to work). I find this annoying. I'd like to setup a portable browser of some kind for each kind of site i want to work with. Is there any version of any graphical web browser (including browsers based on the rendering engines of other browsers) that will do this? This way i can simply launch the instance that's already configured to work with staging if i want to test staging. Any ideas?

  Read the article

< Previous Page | 803 804 805 806 807 808 809 810 811 812 813 814  | Next Page >