Search Results

Search found 20625 results on 825 pages for 'client'.

Page 807/825 | < Previous Page | 803 804 805 806 807 808 809 810 811 812 813 814  | Next Page >

  • IPV6 causing issue with DNS

    - by Mike Wells
    I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

    Read the article

  • CSC folder data access AND roaming profiles issues (Vista with Server 2003, then 2008)

    - by Alex Jones
    I'm a junior sysadmin for an IT contractor that helps small, local government agencies, like little towns and the like. One of our clients, a public library with ~ 50 staff users, was recently migrated from Server 2003 Standard to Server 2008 R2 Standard in a very short timeframe; our senior employee, the only network engineer, had suddenly put in his two weeks notice, so management pushed him to do this project before quitting. A bit hasty on management's part? Perhaps. Could we do anything about that? Nope. Do I have to fix this all by myself? Pretty much. The network is set up like this: a) 50ish staff workstations, all running Vista Business SP2. All staff use MS Outlook, which uses RPC-over-HTTPS ("Outlook Anywhere") for cached Exchange access to an offsite location. b) One new (virtualized) Server 2008 R2 Standard instance, running atop a Server 2008 R2 host via Hyper-V. The VM is the domain's DC, and also the site's one and only file server. Let's call that VM "NEWBOX". c) One old physical Server 2003 Standard server, running the same roles. Let's call it "OLDBOX". It's still on the network and accessible, but it's been demoted, and its shares have been disabled. No data has been deleted. c) Gigabit Ethernet everywhere. The organization's only has one domain, and it did not change during the migration. d) Most users were set up for a combo of redirected folders + offline files, but some older employees who had been with the organization a long time are still on roaming profiles. To sum up: the servers in question handle user accounts and files, nothing else (eg, no TS, no mail, no IIS, etc.) I have two major problems I'm hoping you can help me with: 1) Even though all domain users have had their redirected folders moved to the new server, and loggin in to their workstations and testing confirms that the Documents/Music/Whatever folders point to the new paths, it appears some users (not laptops or anything either!) had been working offline from OLDBOX for a long time, and nobody realized it. Here's the ugly implication: a bunch of their data now lives only in their CSC folders, because they can't access the share on OLDBOX and sync with it finally. How do I get this data out of those CSC folders, and onto NEWBOX? 2) What's the best way to migrate roaming profile users to non-roaming ones, without losing vital data like documents, any lingering PSTs, etc? Things I've thought about trying: For problem 1: a) Reenable the documents share on OLDBOX, force an Offline Files sync for ALL domain users, then copy OLDBOX's share's data to the equivalent share on NEWBOX. Reinitialize the Offline Files cache for every user. With this: How do I safely force a domain-wide Offline Files sync? Could I lose data by reenabling the share on OLDBOX and forcing the sync? Afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? b) Determine which users have unsynced changes to OLDBOX (again, how?), search each user's CSC folder domain-wide via workstation admin shares, and grab the unsynched data. Reinitialize the Offline Files cache for every user. With this: How can I detect which users have unsynched changes with a script? How can I search each user's CSC folder, when the ownership and permissions set for CSC folders are so restrictive? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? c) Manually visit each workstation, copy the contents of the CSC folder, and manually copy that data onto NEWBOX. Reinitialize the Offline Files cache for every user. With this: Again, how do I 'break into' the CSC folder and get to its data? As an experiment, I took one workstation's HD offsite, imaged it for safety, and then tried the following with one of our shop PCs, after attaching the drive: grant myself full control of the folder (failed), grant myself ownership of the folder (failed), run chkdsk on the whole drive to make sure nothing's messed up (all OK), try to take full control of the entire drive (failed), try to take ownership of the entire drive (failed) MS KB articles and Googling around suggests there's a utility called CSCCMD that's meant for this exact scenario...but it looks like it's available for XP, not Vista, no? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? For problem 2: a) Figure out which users are on roaming profiles, and where their profiles 'live' on the server. Create new folders for them in the redirected folders repository, migrate existing data, and disable the roaming. With this: Finding out who's roaming isn't hard. But what's the best way to disable the roaming itself? In AD Users and Computers, or on each user's workstation? Doing it centrally on the server seems more efficient; that said, all of the KB research I've done turns up articles on how to go from local to roaming, not the other way around, so I don't have good documentation on this. In closing: we have good backups of NEWBOX and OLDBOX, but not of the workstations themselves, so anything drastic on the client side would need imaging and testing for safety. Thanks for reading along this far! Hopefully you can help me dig us out of this mess.

    Read the article

  • Automatic Maintenance Jobs in every PDB? New SPM Evolve Advisor Task in Oracle 12.1.0.2

    - by Mike Dietrich
    A customer checking out our slides from the OTN Tour in August 2014 asked me a finicky question the other day: "According to the documentation the Automatic SQL Tuning Advisor maintenance task gets executed only within the CDB$ROOT, but not within each PDB - but the slides are not clear here. So what is the truth?" Ok, that's good question. In my understanding all tasks will get executed within each PDB - that's why we recommend (based on experience) to break up the default maintenance windows when using Oracle Multitenant. Otherwise all PDBs will have the same maintenance windows, and guess what will happen when 25 PDBs start gathering object statistics at the same time ... The documentation indeed says: Automatic SQL Tuning Advisor data is stored in the root. It might have results about SQL statements executed in a PDB that were analyzed by the advisor, but these results are not included if the PDB is unplugged. A common user whose current container is the root can run SQL Tuning Advisor manually for SQL statements from any PDB. When a statement is tuned, it is tuned in any container that runs the statement. This sounds reasonable. But when we have a look into our PDBs or into the CDB_AUTOTASK_CLIENT view the result is different from what the doc says. In my environment I did create just two fresh empty PDBs (CON_ID 3 and 4): SQL> select client_name, status, con_id from cdb_autotask_client; CLIENT_NAME                           STATUS         CON_ID------------------------------------- ---------- ----------auto optimizer stats collection       ENABLED             1sql tuning advisor                    ENABLED             1auto space advisor                    ENABLED             1auto optimizer stats collection       ENABLED             4sql tuning advisor                    ENABLED             4auto space advisor                    ENABLED             4auto optimizer stats collection       ENABLED             3sql tuning advisor                    ENABLED             3auto space advisor                    ENABLED             3 9 rows selected. I haven't verified the reason why this is different from the docs but it may have been related to one change in Oracle Database 12.1.0.2: The new SPM Evolve Advisor Task ( SYS_AUTO_SPM_EVOLVE_TASK) for automatic plan evolution for SQL Plan Management. This new task doesn't appear as a stand-alone job (client) in the maintenance window but runs as a sub-entity of the Automatic SQL Tuning Advisor task. And (I'm just guessing) this may be one of the reasons why every PDB will have to have its own Automatic SQL Tuning Advisor task  Here you'll find more information about how to enable, disable and configure the new Oracle 12.1.0.2 SPM Evolve Advisor Task: Oracle Database 12.1.0.2 SQL Tuning Guide:Managing the SPM Evolve Advisor Task -Mike

    Read the article

  • System user authentication via web interface [closed]

    - by donodarazao
    Background: We have one pretty slow and expensive satellite Internet connection that is shared in a network with 5-50 users. To limit traffic, users shall pay a certain sum of money per hour. Routing and traffic accounting on user basis is done by a opensuse 10.3 server. Login is done via pppoe, and for each connection, username, bytes_sent, bytes_rcvd, start_time, end_time,etc are written into a mysql database. Now it was decided that we want to change from time-based to volume-based pricing. As the original developer who installed the system a couple of years ago isn't available, I'm trying to do the changes. Although I'm absolutely new to all this, there is some progress. However, there's one point I'm absolutely stuck. Up to now, only administrators can access connection details and billing information via a web interface. But as volume-based prices are less transparent to users than time-based prices, it is essential that users themselves can check their connections and how much they cost via the web interface. For this, we need some kind of user authentication. Actual question: How to develop such a user authentication? Every user has a linux system user account. With this user name and password, connection to the pppoe-server is made by the client machines. I thought about two possibles ways to authenticate users: First possibility: Users type username and password in a form. This is then somehow checked. We already have to possibilities to change passwords via the web interface. Here are parts of the code: Part of the Perl script the homepage is linked to: #!/usr/bin/perl use CGI; use CGI::Carp qw(fatalsToBrowser); use lib '../lib'; use own_perl_module; my @error; my $data; $query = new CGI; $username = $query->param('username') || ''; $oldpasswd = $query->param('oldpasswd') || ''; $passwd = $query->param('passwd') || ''; $passwd2 = $query->param('passwd2') || ''; own_perl_module::connect(); if ($query->param('submit')) { my $benutzer = own_perl_module::select_benutzer(username => $username) or push @error, "user not exists"; push @error, "your password?!?" unless $passwd; unless (@error) { own_perl_module::update_benutzer($benutzer->{id}, { oldpasswd => $oldpasswd, passwd => $passwd, passwd2 => $passwd2 }, error => \@error) and push @error, "Password changed."; } } Here's part of the sub update_benutzer in the own_perl_module: if ($dat-{passwd} ne '') { my $username = $dat-{username} || $select-{username}; my $system = "./chpasswd.pl '$username' '$dat-{passwd}'" . (defined($dat-{oldpasswd}) ? " '$dat-{oldpasswd}'" : undef); my $answer = $system; if ($? != 0) { chomp($answer); push @$error, $answer || "error changing password ($?)"; Here's chpasswd.pl: #!/usr/bin/perl use FileHandle; use IPC::Open3; local $username = shift; local $passwd = shift; local $oldpasswd = shift; local $chat = { 'Old Password: $' => sub { print POUT "$oldpasswd\n"; }, 'New password: $' => sub { print POUT "$passwd\n"; }, 'Re-enter new password: $' => sub { print POUT "$passwd\n"; }, '(.*)\n$' => sub { print "$1\n"; exit 1; } }; local $/ = \1; my $command; if (defined($oldpasswd)) { $command = "sudo -u '$username' /usr/bin/passwd"; } else { $command = "sudo /usr/bin/passwd '$username'"; } $pid = open3(\*POUT, \*PIN, \*PERR, $command) or die; my $buffer; LOOP: while($_ = <PERR>) { $buffer .= $_; foreach (keys(%$chat)) { if ($buffer =~ /$_/i) { $buffer = undef; &{$chat->{$_}}; } } } exit; Could this somehow be adjusted to verify users, but not changing user passwords? The second possibility I see: all pppoe connections are logged in the mysql database. If I could somehow retrieve the username (or uid) of the user connected by pppoe, this could be used to authenticate users. Users could only check their internet connections and costs when they are online (and thus paying money), but this could be tolerated. Here's a line of the script that inserts connections into the database: my $username = $ENV{PEERNAME}; I thought it would be easy to use this variable, but $username seems to be always empty in test-scripts (print $username). Any idea how to retrieve the user connected to the pppoe server? Sorry for the long question! Any help would be very much appreciated. :)

    Read the article

  • CodePlex Daily Summary for Wednesday, August 13, 2014

    CodePlex Daily Summary for Wednesday, August 13, 2014Popular ReleasesLozzi's SharePoint 2013 Scripts: Lozzi.Fields (without Site Col Admin): This file is the same as the primary download, however I've removed the override allowing Site Collection Administrators access regardless of groups. This applies to the disableWithAllowance and hideWithAllowance functions.bitboxx bbcontact: 01.00.00: Release Notes bitboxx bbcontact 01.00.00bbcontact 01.00.00 will work for any DNN version 6.1.0 and up. - Initial releaseAD4 Application Designer for flow based .NET applications: AD4.AppDesigner.23.27: AD4.Iteration.23.27(Advanced Rendering Features) Refacturing: RenderStepPinsCaptions simplified by extending FlowChartStepPinDecoratorExtensions RenderFlowChartPinsCaptions simplified by FlowChartFlowPinDecoratorExtensions RenderWiresCaptions simplified by FlowChartWireDecoratorExtensions Design of tutorial samples updated Next tutorial finished: ThreadAsynchronizer Pattern (Version V7) ToDo: Some tutorials are unfinished but coming soon ... Note: The gluing code of the AD4.AppDesig...OooPlayer: 1.1: Added: Support for speex, TAK and OptimFrog files Added: An option to not to load cover art Added: Smaller package size Fixed: Unable to drag&drop audio files to playlist Updated: FLAC, WacPack and Opus playback libraries Updated: ID3v1 and ID3v2 tag librariesEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...Python Tools for Visual Studio: 2.1 RC: Release notes for PTVS 2.1 RC We’re pleased to announce the release candidate for Python Tools for Visual Studio 2.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, editing, IntelliSense, interactive debugging, profiling, Microsoft Azure, IPython, and cross-platform debugging support. PTVS 2.1 RC is available for: Visual Studio Expre...Aspose for Apache POI: Missing Features of Apache POI SS - v 1.2: Release contain the Missing Features in Apache POI SS SDK in comparison with Aspose.Cells What's New ? Following Examples: Create Pivot Charts Detect Merged Cells Sort Data Printing Workbooks Feedback and Suggestions Many more examples are available at Aspose Docs. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.AngularGo (SPA Project Template): AngularGo.VS2013.vsix: First ReleaseDaphne 2014 - application for playing Czech Draughts: Daphne 2014 verze 0.9.0.21: Daphne 2014 verze 0.9.0.21MFCBDAINF: MFCBDAINF: Added recognition of TBS, Hauppauge, DVBWorld and FireDTV proprietary GUID'sFluffy: Fluffy 0.3.35.4: Change log: Text editorSKGL - Serial Key Generating Library: SKGL Extension Methods 4 (1.0.5.1): This library contains methods for: Time change check (make sure the time has not been changed on the client computer) Key Validation (this will use http://serialkeymanager.com/ to validate keys against the database) Key Activation (this will, depending on the settings, activate a key with a specific machine code) Key Activation Trial (allows you to update a key if it is a trial key) Get Machine Code (calculates a machine code given any hash function) Get Eight Byte Hash (returns an...Touchmote: Touchmote 1.0 beta 13: Changes Less GPU usage Works together with other Xbox 360 controls Bug fixesPublic Key Infrastructure PowerShell module: PowerShell PKI Module v3.0: Important: I would like to hear more about what you are thinking about the project? I appreciate that you like it (2000 downloads over past 6 months), but may be you have to say something? What do you dislike in the module? Maybe you would love to see some new functionality? Tell, what you think! Installation guide:Use default installation path to install this module for current user only. To install this module for all users — enable "Install for all users" check-box in installation UI ...Modern UI for WPF: Modern UI 1.0.6: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE LinkGroup.GroupName renamed to GroupKey NEW FEATURES Improved rendering on high DPI screens, including support for per-monitor DPI awareness available in Windows 8.1 (see also Per-monitor DPI awareness) New ModernProgressRing control with 8 builtin styles New LinkCommands.NavigateLink routed command New Visual Studio project templates 'Modern UI WPF App' and 'Modern UI W...Roll20 Custom Power Card Macro Generator: R20CPCMG 0.2.0.0 Public Beta: This is the beta release for version 0.2.0.0. Its still very much a work in progress, but I'd rather get this out now before another lapse in updates so we can solicit feedback from the community. The two main updates for this version is that you can now import macros and you can customize the tag buttons and group them by game system. The Import Macro function turns the raw text, like the following, into something you can easily edit inside the program. !power --name|Whirling Assault --us...Utility Database: UtilityDB.2.0: Release Notes: Version 2.0 This is the second release of the UtilityDB, it builds on top of and includes the Version 1.8 of code. This release focus on performance metrics in particular Disk I/O. The deployment scripts have been rewritten to utilize transactions to insure completeness of script execution. This project releases the source code as a SQL Server 2012 project file. The intended way to deliver the scripts to the database is through the execution of the @BuildScript.sql in the ...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Multiple thread safe improvements including AdjustToContents XLHelper XLColor_Static IntergerExtensions.ToStringLookup Exception now thrown when saving a workbook with no sheets, instead of creating a corrupt workbook Fix for hyperlinks with non-ASCII Characters Added basic workbook protection Fix for error thrown, when a spreadsheet contained comments and images Fix to Trim function Fix Invalid operation Exception thrown when the formula functions MAX, MIN, and AVG referenc...SEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...jQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialNew Projectsangle.works: Sample AngularJS projectArtezio spTree for SharePoint 2013: spTree is a jQuery plugin to display SharePoint websites and lists in a tree view. It uses jsTree plugin to display data, expand and complement its settings.DigitalProject: no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no popenelecmedicrec: its an open source emrPetriFlow: A new solution for workflow using Petri NetReflexive .Net: Stream transformation over durable and transient channelsrunner-prototype: Small game prototype for self-practicing, likely no use at all for anyone else.Spizzi PowerShell Module: This project provides different PowerShell CmdLet's combined into one module to extend the built-in PowerShell Modules.Testill: Test Web Fabricator: A highly composable web fabricwingate log parser: wingate log parser

    Read the article

  • How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

    - by Timbo
    I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

    Read the article

  • Windows 2012 - WDS unattend Partition

    - by joe
    I'm trying to install Windows 2012 via Windows 2012 WDS. The installer displays the following error message: the partition selected for the installation (1) does not exist on disk 0. Make sure the unattend answer file's imageselection \installimage setting references a valid partition on this computer, and then restart the installation. the unattend file (created by the "Create Client Unattend" dialog) <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="windowsPE"> <component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86"> <WindowsDeploymentServices> <Login> <WillShowUI>OnError</WillShowUI> <Credentials> <Username>administrator</Username> <Domain>test</Domain> <Password>xxxx</Password> </Credentials> </Login> <WillWipeDisk>true</WillWipeDisk> <DiskConfiguration> <WillShowUI>OnError</WillShowUI> <Disk> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> <CreatePartitions> <CreatePartition> <Order>1</Order> <Type>Primary</Type> <Extend>true</Extend> </CreatePartition> </CreatePartitions> </Disk> </DiskConfiguration> <ImageSelection> <WillShowUI>OnError</WillShowUI> <InstallImage> <ImageGroup>ImageGroup1</ImageGroup> <ImageName>Windows Server 2012 SERVERDATACENTER</ImageName> <Filename>install-(4).wim</Filename> </InstallImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> </ImageSelection> </WindowsDeploymentServices> </component> <component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UserLocale>en-US</UserLocale> </component> <component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <WindowsDeploymentServices> <Login> <WillShowUI>OnError</WillShowUI> <Credentials> <Username>administrator</Username> <Domain>test</Domain> <Password>xxxxx</Password> </Credentials> </Login> <ImageSelection> <WillShowUI>OnError</WillShowUI> <InstallImage> <ImageGroup>ImageGroup1</ImageGroup> <ImageName>Windows Server 2012 SERVERDATACENTER</ImageName> <Filename>install-(4).wim</Filename> </InstallImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> </ImageSelection> </WindowsDeploymentServices> </component> <component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UserLocale>en-US</UserLocale> </component> </settings> </unattend> Any idea why it is not working? thanks

    Read the article

  • I'm a contract developer and I think I'm about to get screwed [closed]

    - by kagaku
    I do contract development on the side. You could say that I'm a contract developer? Considering I've only ever had one client I'd say that's not exactly the truth - more like I took a side job and needed some extra cash. It started out as a "rebuild our website and we'll pay you $10k" type project. Once that was complete (a bit over schedule, but certainly not over budget), the company hired me on as a "long term support" contractor. The contract is to go from March of this year, expiring on December 31st of this year - 10 months. Over which a payment is to be paid on the 30th of each month for a set amount. I've been fulfilling my end of the contract on all points - doing server maintenence, application and database changes, doing huge rush changes and pretty much just going above and beyond. Currently I'm in the middle of development of an iPhone mobile application (PhoneGap based) which is nearing completion (probably 3-4 weeks from submission). It has not been all peaches and flowers though. Each and every month when my paycheck comes due, there always seems to be an issue of sorts. These issues did not occur during the initial project, only during the support contract. The actual contract states that my check should be mailed out on the 30th of the month. I have received my check on time approximately once (on time being about 2-3 days within the 30th). I've received my paycheck as late as the 15th of the next month - over two weeks late. I've put up with it because I need the paycheck. There have been promises and promises of "we'll send it out on time next time! I promise" - only to receive it just as late the next month. When I ask about payment they give me a vibe like "why are you only worried about money?" - unfortunately I don't have the luxury of not worrying about money. The last straw was with my August payment, which should have been mailed on August 30th. I received it on September 12th. The reason for the delay? "USPS is delaying it man! we sent it out on the 1st!" is the reason I got. When I finally got the check in the mail, the postage on the envelope was marked September 10th - the date it was run through the postage machine. I've been outright lied to, at this point. I carry on working, because again - I need a paycheck. I orchestrated the move of our application to a new server, developed a bunch of new changes and continued work on the iPhone app. All told I probably went over my hourly allotment (I'm paid for 40 hours a month, I probably put in at least 50). On Saturday, the 1st, I gave the main contact at the company (a company of 3, by the way - this is not some big corporation) a ring and filled him in on the status of my work for the past two weeks. Unusually I hadn't heard from him since the middle of September. His response was "oh... well, that is nice and uh.. good job. well, we've been talking within the company about things and we've certainly got some decisions ahead of us..." - not verbatim but you get the idea (I hope?). I got out of this conversation that the site is not doing very well (which it's not) and they're considering pulling the plug. Crap, this contract is going to end early - there goes Christmas! Fine, that's alright, no problem. I'll get paid for the last months work and call it a day. Unfortunately I still haven't gotten last months check, and I'm getting dicked around now. "Oh.. we had problems transferring funds, we'll try and mail it out tomorrow" and "I left a VM with the finance guy, but I can't get ahold of him". So I'm getting the feeling I'm not getting paid for all the work I put in for September. This is obviously breach of contract, and I am pissed. Thinking irrationally, I considered changing all their passwords and holding their stuff hostage. Before I think it through (by the way, I am NOT going to do this, realized it would probably get me in trouble), I go and try some passwords for our various accounts. Google Apps? Oh, I'm no longer administrator here. Godaddy? Whoops, invalid password. Disqus? Nope, invalid password here too. Google Adsense / Analytics? Invalid password. Dedicated server account manager? Invalid password. Now, I have the servers root password - I just built the box last week and haven't had a chance to send the guy the root password. Wasn't in a rush, I manage the server and they never touch it. Now all of a sudden all the passwords except this one are changed; the writing is on the wall - I am out. Here's the conundrum. I have the root password, they do not. If I give them this password all the leverage I have is gone, out the door and out of my hands. During this argument of why am I not getting paid the guy sends me an email saying "oh by the way, what's the root username and password to the server?". Considering he knows absolutely nothing, I gave him an "admin" account which really has almost no rights. I still have exclusive access to the server, I just don't know where to go. I can hold their data hostage, but I'm almost positive this is the wrong thing to do. I'd consider it blackmail, regardless of whether or not I have gotten paid yet. I can "break" something on the server and give them the whole "well, if you were paying me I could fix it!" spiel. This works from a "well he's not holding their stuff hostage" point of view, but what stops them from hiring some one else to just fix the issue at hand? For all I know the guys nephew is a "l33t hax0r" and can figure it out for free. I can give in, document as much as I can and take him to small claims court. This is breach of contract, I'm not getting paid. I have a case, right? ???? Does anyone have any experience in this? What can I do? What are my options? I'm broke, I can't afford a lawyer and I can barely afford not getting this paycheck. My wife doesn't work (I work two jobs so she doesn't have to work - we have a 1 year old) and is already looking at getting a part time job to cover the bills. Long term we'll be fine, but this has pissed me off beyond belief! Help me out, I'm about to get screwed.

    Read the article

  • Windows 7 ipv4 autoconfiguration - cannot connect to internet

    - by GuiccoPiano
    I get my internet connection from a guy (lets call him my service provider henceforth). He gives internet connections to many students here in my hostel. My PC gets a private IP through his DHCP server. Now, when I switch on my WiFi, my PC gets a private IP as it should and I can connect to the internet just fine. But now when I connect my LAN cable, my PC gets some "Autoconfiguration IPv4 address" 169.254.110.154(Preferred) and I cannot connect to the internet. Here is the ipconfig /all output for ethernet port: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8059 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : <<MAC DISPLAYED HERE>> DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5054:a347:7d06:6e9a%11(Preferred) Autoconfiguration IPv4 Address. . : 169.254.110.154(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 285222078 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-50-AC-68-54-42-49-EE-52-16 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I also tried: Start a command prompt as admin. Run "netsh winsock reset" Run "netsh interface ipv4 reset" Run "netsh interface ipv6 reset" Restart your computer. All this does not work. Any idea to solve the problem?

    Read the article

  • WebLogic Server 12c????????????????????????????????????/???????WebLogic Server 12c Forum 2012?????

    - by ???02
    2012?1??????WebLogic Server 12c???200??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????2012?8????????WebLogic Server 12c Forum 2012????????·??????????????????????????/?????????????????(???) ????????????WebLogic Server 12c????????? ??WebLogic Server???????·???????WebLogic Server?????????????????????????????????????WebLogic Server 12c Forum 2012?????????????????·????????????????????????????????????????????????????·?????????????WebLogic Server 12c??????????????/????????????? ???????????????????????????? ????????????????????????????????????? ?????? ??????????????????????????????????? ??????????????????????????????????????????????????????????????????????????“??????????????????????????”????????????????????????WebLogic Server 11g?????????????????? (1)????????????????????! = ??ID????????? WebLogic Server??????????????????????????????????????????????????????????????????????? ????????????????? ?????????·??????????????????? ??????init.d???????????? ???????????????ID????(boot.properties)??????????????????????WebLogic Server?????????????????????????????????? ???ID????????? <DOMAIN_HOME>/servers//security???????????·?????boot.properties????????????2??????? username= password= ???????????????????WebLogic Server?????????????????????????????????????????????????????????????????? (2)WLST???????????????????! = WLST????????? WebLogic Server???????????????????????????????????????????????????????????????/?????????????WLST(WebLogic Scripting Tool)????????????????????????????????????????????????????????????????????/????????????WLST?????????? ?????????????WLST???????????????????????Python?Java?????Jython?????????????WebLogic Server?????????????MBean???????????????????????????????????WLST?????????????Excel????????????????????????????????????????????????????????????????????????????WLST?????????????????????????????????? ?WLST???????????? ????????[????·????]-[???????]?????????????????[??]???????? ???????????????????????????[?????]????????py?????WLST???????????????????????????[??]??????????????????? ???????????????WLST?????????????????????WLST???????????????????????????????????????????????????????????????????? (3)????SQL?WebLogic Server???????! = ????·????? ??????????WebLogic Server??????????????????????????????SQL??????????????????????????????????·????????????????????????????????????????·???????????WebLogic Server????????·???????·???????????????WebLogic Server????/?????????????????????????????????????JDBC????????????????????????????SQL?ResultSet?????????????·????????? ????·????????????? ?????·??????? ????????[??]-[????]-[?????]-?????????????WebLogic Server?????/?????????????????????????????????????????[weblogic]-[jdbc]-[sql]-[DebugJDBCSQL]?????????[???]???????? ??????JDBC?????·???????·????????? ????/???????????????????????/???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? (4)[??]??????????????! = [??????????]????? ?[??]????????????????????????????????????????????????????????????????????????????[??]?????????????????????????????????2??????????????????????????????????????????????????????????????????????????????????????????????????????[??????????]?????????2?????????????????????????? ?????????2????????????? ????????[??????]-[???]-[???????????????]??????[???·???????]?????[??????????]?????????[??]???????? ??????????????????????????? (5)????????????????????????????! = ?V$SESSION.PROGRAM?????????????? ???Oracle Database?????????????????????????? WebLogic Server?????????????????????????????????????????????????????????????????????????????1??WebLogic Server????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????V$SESSION.PROGRAM?????????????Oracle Database?????????·?????????????????????????????????V$SESSION????????????????PROGRAM????????????????????????????WebLogic Server???????????????????????????JDBC Thin Client???JDBC????????????????????????????????????????PROGRAM???????????????????????·?????????????????????? V$SESSION.PROGRAM???????????????????????????? ?V$SESSION.PROGRAM??????????????? ???????????([???JDBC?????????]??)?[?????]?????1??????? v$session.program= (6)???·???????·????????! = ????·????·????????? WebLogic Server?????????????????????????????????(???·??)????????????????·???????1??????????????????????????????????????????WebLogic Server?????????????????????????????????? ??????????????????·????·?????????????????????????WebLogic Server?????????????????????????????????????? ???????????JDK???????Log4j????????????????WebLogic Server???????????????? WebLogic Server????????JDK?Log4j??????????????????JDK?????????? ????·????·???????????????? ?????·????·????????? JDK???Log4j?????????????????????/?????????????? ?JDK???:weblogic.logging.ServerLoggingHandler ?Log4j???:weblogic.logging.log4j.ServerLoggingAppender ??????Log4j?????????????(????)? <appender name="file" class="org.apache.log4j.FileAppender"> <param name="File" value=“applog.log" /> <param name="Append" value="true" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%d %5p %c{1} - %m%n" /> </layout> </appender> <appender name="server" class="weblogic.logging.log4j.ServerLoggingAppender"/> ?????????????????????????????????????????WebLogic Server?????????????????????????????????????? ?JDK???:-Djava.util.loggin.config.file=<PATH> ?Log4j???:-Dlog4j.configuration=<PATH> ???????????WAR??????????????????????·????·??????????WebLogic Server??????????????????????????????????????WebLogic Server???????????????????? (7)BEA??????????????????????! = GetMessage??????? WebLogic Server????????·??????????????(?BEA-XXXXXX??????????????????BEA?????)????WebLogic Server?HTML??????????????????Web????????????????????????????????????????????? ????????????GetMessage?????????????BEA?????????????????????????????????????????? ?GetMessage????????? java?????WebLogic Server?GetMessage???????????? java weblogic.GetMessage ?????????? ?-id XXXX:???????????? ?-verbose:????????? ?-lang XX:???????(?????????????????????????????????????) ????BEA-000337?????????????????????????????? java weblogic.GetMessage -verbose -id 000337 -lang ja 000337: ?????"{2}"?????{0}?"{1}"??????????????????????????(StuckThreadMaxTime)"{3}"?????????????·????: {4} L10n?????: weblogic.kernel I18n?????: weblogic.kernel ??????: WebLogicServer ???: ??? ????·????: false ????????: ???????????????????????????????? ??: ???????????????????????????????????? ?????: ??????????????????????????????????????????????????????????????·???(weblogic.Admin THREAD_DUMP)????????? ?????????BEA?????????????????????????????????????????????????????????????????????????????????? ????????“WebLogic??”!? WebLogic Server 12c????/??? ????????????? ???????????? ????????????????? ?????????????? ???????????? ????????????WebLogic Server???????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????????????????????????WebLogic Server 11g(10.3.6)???????????? ?????????Mac OS X???(???????)?IE 6?7??????????????? ??OTN??????????????????System Requirements and Supported Platforms for WebLogic Server 12c (12.1.1.x)?????????????Mac OS?????????????2012?8?2?????Mac OS X Snow Leopard????Java SE 7?????????? ???Internet Explorer(IE) 6.x??7.x???????????????????IE????????IE 8.x???????????? ????Web?????WebLogic Server?????????Web???·??????64?????????????(WebLogic Server??????????64?????)?????????WebLogic Server????????????????????????????????????????? ?RESTful????????? Java EE 6?JAX-RS????????????WebLogic Server 12c???????????????????????????????????? ?RESTful??????????? [????]-[??]-[??]?[RESTful??????????]?????????WebLogic Server??????????????????URL?????????????????????????? http(s)://:/management/tenant-monitoring/servers ???????servers??????clusters???applications???datasources??????????????????????????????????????????????? ????HTML??????JSON?XML???????????????????????????????????????????????????????????????????? ?JDBC????????(1):??????·???? ???????????????????????WebLogic Server??????????????????????????????????12c??Active GridLink for RAC???????????????????????????????????? 1??????????·?????????????????????[????]?????????[??????]????????????????????????????????????????????????????????????????????? <DOMAIN_HOME>/servers//logs/datasource.log ?????????????????????????????????????? ??????????????????????WLDF????????????????WebLogic Server 12c?????????????????????? ?JDBC????????(2):?????????? ????????????????[??]-[?????]???[????]?????????????????????????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????? ??????????????????????????????????WebLogic Server 11g(10.3.1)???1??????????????????????????????????????? ?JDBC????????(3):????????? WebLogic Server 12c??[??]-[?????]????????????????????[?????????]???1???????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Database?????????????????????????? ErrorCode ????? 3113 ???????end-of-file???????? 3114 Oracle?????????? 1033 Oracle??????????????? 1034 Oracle??????? 1089 ?????????? - ?????????? 1090 ???????? - ?????????? 17002 I/O?? ?????????(1):?????/?????????????????? ??????????2?????? 1???WebLogic Server????????????????????????????????????????? -Dweblogic.management.username= -Dweblogic.management.password= ????????????ID???????????????? ?????????(2):SSL????Certicom?????? SSL?????Certicom(?????10.3.3?????)???????JSSE(Java Secure Socket Extension)????????????????????????????????????????? ??????????????????????????????? ????????????WebLogic Server?????????????????????????????????Java?????????·????2??????????Java????????????????nodemanager.properties?????????????StartScriptEnabled?????????false??true?????? ?????????????false?????????????WebLogic Server??????????????????true??????????????startWebLogic???????????????WebLogic Server??????????????startWebLogic???????????????????????????????????????????????????????????????? ???/???????(1):setDomainEnv???????????????? ??/?????????????“?????·???”????????????????????????????2???? 1??setDomainEnv?????????????????????????????32???JDK????????Perm????????????? ?WebLogic Server 11g(10.3.5) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=48m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=128m" ?WebLogic Server 12c(12.1.1) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=128m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=256m" ???/???????(2):stopWebLogic??????shutdown.py????????? ??/???????????2????stopWebLogic??????????????shutdown.py??????????????????????????????ID/????????????????????????shutdown.py??????????????WebLogic Server 11g(10.3.3)?????????????ID????????????????????WebLogic Server 12c???????? ????????????? ?????????????/??? ???????????/?????????????? ???KernelMBean????UseConcurrentQueueForRequestManager?????????????????????????????[????]--[??????]-[??]?[?????·???????????????]??????????????????????????????????????????MBean???????????????????????????????????????????????????????????????????????????????????????????(???)? ??1???Windows?????????beasvc.exe????wlsvc.exe????????????????????????wlsvc _???????BEA????????????????(???)? ????WLST???????Jython???????????????????2.1??2.2.1????????(???11g??2.2.1???????)???????????????……?(???)? ???????WebLogic Server 12c???????????????????????/????????????????????????????????????????WebLogic Server?????????WebLogic Server????????????Facebook?????????WebLogic!??????????????

    Read the article

  • Citrix Xen VM's lose networking

    - by Ash
    My client has a XenServer 6.0.2 installation with 2 Window Server 2008 R2 virtual machines. Whenever the virtual machines are rebooted they lose their IP settings (IP address, subnet, gateway). Each time after a reboot I need to login to each VM via XenCenter and re-apply the required static IP settings. This causes issues with connected iSCSI drives within each VM - drives need to be reconnected after each reboot. For example, a network adapter has the following settings pre-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 IPv4 Address. . . . . . . . . . . : 10.101.0.101(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.101.0.10 DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Post-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 Autoconfiguration IPv4 Address. . : 169.254.153.174(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Under XenCenter -- Virtual Network Interfaces, each adapter is set to a static MAC address (i.e. "Use this MAC address"). I have tried the following commands within one VM but this had no effect: netsh winsock reset catalog netsh int ip reset Can someone please help?

    Read the article

  • Why does my ping command (Windows) results alternate between "timeout" and "network is not reachable"?

    - by Sopalajo de Arrierez
    My Windows is in Spanish, so I will have to paste console outputs in that language (I think that translating without knowing the exact terms used in english versions could give worse results than leaving it as it appears on screen). This is the issue: when pinging a non-existent IP from a WinXP-SP3 machine (clean Windows install, just formatted), I get sometimes a "Timeout" result, and sometimes a "network is not reachable" message. This is the result of: ping 192.168.210.1 Haciendo ping a 192.168.210.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 192.168.210.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms 192.168.210.1 does not exist on the network. DHCP client is enabled, and the computer gets assigned those network config by the router. My IP: 192.168.11.2 Netmask: 255.255.255.0 Gateway: 192.168.11.1 DNS: 80.58.0.33/194.224.52.36 This is the output from "route print command": =========================================================================== Rutas activas: Destino de red Máscara de red Puerta de acceso Interfaz Métrica 0.0.0.0 0.0.0.0 192.168.11.1 192.168.11.2 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.11.0 255.255.255.0 192.168.11.2 192.168.11.2 20 192.168.11.2 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.11.255 255.255.255.255 192.168.11.2 192.168.11.2 20 224.0.0.0 240.0.0.0 192.168.11.2 192.168.11.2 20 255.255.255.255 255.255.255.255 192.168.11.2 192.168.11.2 1 255.255.255.255 255.255.255.255 192.168.11.2 3 1 Puerta de enlace predeterminada: 192.168.11.1 =========================================================================== Rutas persistentes: ninguno The output of: ping 1.1.1.1 Haciendo ping a 1.1.1.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 1.1.1.1: Paquetes: enviados = 4, recibidos = 0, perdidos = 4 1.1.1.1 does not exist on the network. and the output of: ping 10.1.1.1 Haciendo ping a 10.1.1.1 con 32 bytes de datos: Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Estadísticas de ping para 10.1.1.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), 10.1.1.1 does not exist on the network. I can do some aproximate translation of what you demand if necessary. I have another computers in the same network (WinXP-SP3 and Win7-SP1), and they have, too, this problem. Gateway (Router): Buffalo WHR-HP-GN (official Buffalo firmware, not DD-WRT). I have some Linux (Debian/Kali) machine in my network, so I tested things on it: ping 192.168.210.1 PING 192.168.210.1 (192.168.210.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=1 Packet filtered From 80.58.67.86 icmp_seq=2 Packet filtered From 80.58.67.86 icmp_seq=3 Packet filtered From 80.58.67.86 icmp_seq=4 Packet filtered to the non-existing 1.1.1.1 : ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. ^C --- 1.1.1.1 ping statistics --- 153 packets transmitted, 0 received, 100% packet loss, time 153215ms (no response after waiting a few minutes). and the non-existing 10.1.1.1: ping 10.1.1.1 PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=20 Packet filtered From 80.58.67.86 icmp_seq=22 Packet filtered From 80.58.67.86 icmp_seq=23 Packet filtered From 80.58.67.86 icmp_seq=24 Packet filtered From 80.58.67.86 icmp_seq=25 Packet filtered What is going on here? I am posing this question mainly for learning purposes, but there is another reason: when all pings are returning "timeout", it creates an %ERRORLEVEL% value of 1, but if there is someone of "Network is not reachable" type, %ERRORLEVEL% goes to 0 (no error), and this could be inappropriate for a shell script (we can not use ping to detect, for example, if the network is down due to loss of contact with the gateway).

    Read the article

  • ??Recovery Manager (RMAN)??

    - by ??
    Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-font-kerning:1.0pt;} ????,RMAN?Oracle?????????????????????,?RMAN?????????????????,?????????????? ?????,RMAN????? RMAN???????????? RMAN???/?????????? ???????????? ????1487262.1???????????,?????RMAN??/????????4??????: ???? ???? ???? ??????? ???????????????,???????SQLPLUS???,???????????“DD-MON-RR HH24:MI:SS”???????,??????????? ??: SQL>spool monitor.out SQL>@monitor '06-aug-12 16:38:03' ?????RMAN???????????,?????????,?????? - ???????????????????,?????RMAN?????? ???????4??????????????? ???? ??DBA????????V$SESSION_LONGOPS???????????????????????,?????????????????? ??: SID CH CONTEXT SOFAR TOTALWORK % Complete --- -- ------- ------ ---------- ---------- 16 t1 1 181950 1186752 15.33 148 t2 1 249722 422400 59.12 ??: - ???????????????? - ??????????????? ???? ??????RMAN?????????????????????????????????????????????????????????Oracle???????????????????????? ??: SID CH SEQ# EVENT STATE SECONDS --- -- ---- --------------------------------- ------- ------- 16 t1 5735 RMAN backup & recovery I/O WAITING 10 143 8200 SQL*Net message from client WAITING 258.83 148 t2 7941 Backup: MML create a backup piece WAITING 196.13 ?????????T2???????????????,???????T2????????????????? ??: -?CH??????RMAN???,?Rman???????????,????????? -??SEQ#?????????,???????? -?????????,??????SEQ#???? -????????????????RMAN backup & recovery I/O'??????????????IO???? ???? ???????????????????????????????,???????backup_tape_io_slaves=TRUE,?????????????????? ??: SID CH STATUS OPEN_TIME SOFAR Mb TOTMB IO_COUNT % Complete TYPE FILENAME --- -- ----------- ------------------ -------- ------ ---------- -------- ------ ------------- 19 t1 FINISHED 02-aug-12 17:28:42 567.5 567.5 569 100.00 INPUT users01.dbf 19 t1 IN PROGRESS 02-aug-12 17:28:42 3489.99 8704 3490 40.10 INPUT sh.dbf 19 t1 IN PROGRESS 02-aug-12 17:28:42 3778 15113 OUTPUT kvnhlb22_1_1 20 t2 FINISHED 02-aug-12 17:28:38 740 740 742 100.00 INPUT system01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 880 880 882 100.00 INPUT sysaux01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 1680 1680 1682 100.00 INPUT undotbs01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 3007.25 12029 OUTPUT l0nhlb23_1_1 ??: - ???????????????,??RMAN??????IO,??????????IO??,??(Document 360443.1 RMAN Backup Performance) - ?? IO_COUNT??????????? ??????? ?????,????????, ????????????v$backup_sync_io ?????????. ??: SID CH FILENAME TYPE STATUS BSZ BFC OPEN IO_COUNT --- -- ------------ ------ ----------- ------ --- ------------------ -------- 16 t1 ksnhla1b_1_1 OUTPUT IN PROGRESS 262144 4 02-aug-12 17:12:20 1092 148 t2 ktnhla1c_1_1 OUTPUT IN PROGRESS 262144 4 02-aug-12 17:12:15 2968 ??: -?????????????????,??RMAN??????IO -?? IO_COUNT?????????? -??IO_COUNT ????, ???IO_COUNT ????????????,???????????????,????????????? ????: ??????????????? Document 1487262.1 Script to monitor RMAN Backup and Restore Operations Document 144640.1   RMAN: Monitoring Recovery Manager Jobs Document 360443.1   RMAN Backup Performance Document 740911.1   RMAN Restore Performance ??,?????My Oracle Support Database Backup and Recovery community ?Oracle?????????????/??????

    Read the article

  • «Oracle E-Business Suite: ERP DBA????»??

    - by user10821858
    ????????,???????4????,????????????????????,?????????«Oracle E-Business Suite:ERP DBA????»????????????????????????,??????????????“??”,????????????,???????????,???????????????????,????,????,?????????????????????????,???????????????,????????????????????,??????????,????????????????????????:1.????????????????????2.??DBA???ERP??,??????????3.???????????,?????????????????????ERP??????4.?????????ERP????????5.??????????????ERP????????????6.??ERP???????????????????7.????CIO???ERP???????????8.????????????????????????? ?:?????????????:http://vdisk.weibo.com/s/6X-ze ?:?????:http://product.dangdang.com/product.aspx?product_id=22788613 ?:?????:http://book.360buy.com/11021724.html ?:?????:http://product.china-pub.com/3661378 ?:?????:http://www.amazon.cn/dp/B008BFNAX0 ?:?????:http://detail.tmall.com/item.htm?id=18024644999 ????,?????????????????????????! ? ? ???? ERP ????????????20 ?,?Oracle ??????(E-Business Suite)? ????????ERP ????,????????????????,???????? ????????,????????????? ??ERP ???,?????????????ERP DBA ????????ERP DBA ???????DBA ????????????:ERP DBA ??????????,?? ???ERP ????????,????????????????????????? ?,???????????????????,ERP DBA ????????????? ??????,?Oracle ???????????ERP ??,?????????,?? ???????????,?????????ERP DBA ??????,??????? ????ERP ?????,???????????????? ???????????ERP DBA ?????,?????????????ERP ? ???,???ERP ??????????,????????????????ERP ? ?????????,??????????ERP ????,?????:“?????? ??,????????”,???“????”????????????????,? ??ERP DBA ?????,?????????????,????????????? ???“????”??,?“??????”???,??????????????, ??????,???????????????????“????,??????”, ???????????,??????????????,???????????? ????????,????????????ERP ????,????ERP ???? ????? ?????? ????7 ?,???????3 ?:?????????????? ???(?1 ~ 2 ?):??????Oracle ????????????????? ???????,??????????ERP ???????????????,??? ???? ???(?3 ~ 6 ?):?3 ????Oracle ERP ?????????????;?4 ????Oracle ERP ???????ERP ????;?5 ??????Oracle ????? ??????????????;?6 ?????????????????ERP ???? ??? ?????(?7 ?):????????Oracle ERP ??????????,??? ??????????????????????,???????????????? ?,????????????????????????????????????? ???? ????????????: (1)????,?????????????????????????????? ?,???????????????????,?????????????????? ??????,??????????????????????? (2)???,???,??????,??????????????????Oracle ERP ???????????,????;????????????Oracle ERP ??? ??????????,????? (3)????????,???????????????????????,?? ?????????,???????????????????????????;?? ERP DBA ????????????,????????????????????,? ???????????,????????,???????????? ??????? (1)Oracle ERP ??????????????????ERP ???????? (2)???ERP ?????????DBA ????IT ????? (3)??????????????????? ??????? ?????????????,??????????????,????????? ???????????????????????????????,???????? ??????: E-Mail:longchun.zhu-AT-gmail-DOT-com ?? “?????,?????”,???????????????“?????”??? ?????????????,???????????????????????? ?????????????????,??Mike?Charles???????????, ????????????????????,??????????????????? ??????? ? ? ? ? ?1 ? Oracle ??????/1 1.1 Oracle ?????????????/2 1.2 Oracle ??????R12 /3 1.2.1 R12 ???????/3 1.2.2 R12 ???/4 1.3 ????/5 ?2 ? ERP ????/6 2.1 ERP ??????/7 2.1.1 ERP ??????????/7 2.1.2 ERP ?????????/8 2.1.3 ERP ??????/8 2.2 ??????/9 2.2.1 ????????/9 2.2.2 ???????/11 2.2.3 ?????????/12 2.3 ??ERP ?????????/14 2.3.1 ????/14 2.3.2 ??????/15 2.3.3 ????/16 2.3.4 ?????/19 2.3.5 ????/19 2.3.6 ??????/23 2.3.7 ???????/25 2.3.8 ????/26 2.3.9 ???????/27 2.4 ????/28 2.5 ????/29 ?3 ? Oracle ERP ??/31 3.1 ?????/32 3.1.1 ?????? /32 3.1.2 ????/34 3.1.3 ????/35 3.1.4 ????/37 3.1.5 ?????/37 3.1.6 ??Bug ??/39 3.1.7 ????/40 3.2 Oracle ??????R12 ???/42 3.2.1 ????/42 3.2.2 ???????/43 3.2.3 ????/43 3.2.4 ??????/60 3.3 ??????????????/62 3.3.1 ???????/62 3.3.2 ??DNS ???/63 3.3.3 ????Oracle ??????/63 3.3.4 ?????/64 3.4 ????/66 ?4 ? ??????ERP ????/67 4.1 ???????/68 4.2 ??????/81 4.3 ??????/83 4.4 ??????/85 4.4.1 ??????????/86 4.4.2 ????????????/86 4.4.3 ??????ERP ????/87 4.5 ???????????/89 4.6 ?????/89 4.6.1 ???????/90 4.6.2 ???????/92 4.6.3 ??redo ??/95 4.6.4 ??????/96 4.7 ????/98 4.7.1 ???????/98 4.7.2 ?????/99 4.7.3 ???????/100 4.7.4 ??????/100 4.7.5 ?????/101 4.8 ????????? /101 4.8.1 ????/102 4.8.2 ??DNS ???/102 4.8.3 ??sendmail /103 4.8.4 ??IMAP ??? /104 4.8.5 ??Oracle Alert /104 4.8.6 ??Workflow Mail /110 4.8.7 ???????/115 4.9 ?? Forms Socket ??/121 4.10 ????????/123 4.11 ?????????? /124 4.11.1 ???????/124 4.11.2 ???????/125 4.12 ???? /127 ?5 ? Oracle ???????????/128 5.1 Oracle ????????/129 5.1.1 ???/129 5.1.2 ???/130 5.1.3 ????/131 5.1.4 ????/131 5.2 ????????/131 5.2.1 Oracle ?????????????/131 5.2.2 Oracle ??????????/133 5.3 ??????/134 5.3.1 ???????????????/135 5.3.2 AutoPatch/136 5.3.3 AutoConfig/138 5.4 Rapid Clone/141 5.4.1 ????????????/141 5.4.2 ?????/142 5.4.3 ??????/145 5.4.4 ?Clone ?? /146 5.4.5 ??????????/146 5.4.6 Clone ??/148 5.4.7 Clone ??????? /150 5.4.8 ??Clone/157 5.5 OAM ??/158 5.5.1 OAM ?????/158 5.5.2 OAM ????????/158 5.5.3 ????????/159 5.5.4 ????????????/159 5.5.5 ????????/164 5.5.6 OAM ??????/168 5.6 ????/171 ?6 ? ???????/172 6.1 ??Oracle ??????/173 6.1.1 ??Form ?HTML ??/173 6.1.2 ????????/182 6.1.3 ????/187 6.2 ????/192 6.2.1 ?????/193 6.2.2 ????? /193 6.2.3 ?????/194 6.3 ???????/195 6.4 ?????/205 6.4.1 “??”?????/205 6.4.2 ???????/206 6.4.3 ??? /207 6.4.4 ??????? /208 6.4.5 ????????? /208 6.4.6 ??????/209 6.4.7 ???????/218 6.4.8 ??????/225 6.5 ??????/237 6.5.1 ??????/237 6.5.2 ??????/239 6.6 ????/245 ?7 ? ERP ???????/246 7.1 ERP ??????/247 7.2 ERP ???????/247 7.2.1 ????????/248 7.2.2 ?????????/248 7.2.3 ?????????/249 7.2.4 ???????/249 7.3 ????????/249 7.3.1 ERP ???????/249 7.3.2 ????/251 7.3.3 ????/251 7.3.4 ????/253 7.3.5 ????/255 7.4 ERP ??????/255 7.4.1 ????????/255 7.4.2 ???????/256 7.4.3 ?????????/257 7.5 ?????ERP ??/260 7.5.1 ????????/260 7.5.2 ????/261 7.5.3 ??????/262 7.5.4 ????????/273 7.6 ERP ????/280 7.6.1 ??X-Windows/280 7.6.2 ???????/281 7.6.3 ?????????/281 7.6.4 ??redo ??/282 7.6.5 ??opmn.xml ??/283 7.6.6 ???????/283 7.6.7 ??Apache ??/285 7.6.8 Forms Server socket ????/285 7.6.9 ??Forms Dead Client ??/286 7.6.10 ??Cancel Query /287 7.6.11 ??????????/288 7.6.12 ????????/293 7.6.13 ?? GSM ??/294 7.6.14 ??“ICX:????”/297 7.6.15 ????????/298 7.6.16 ???????/302 7.7 ??????/305 7.7.1 ?????/305 7.7.2 ????/305 7.7.3 ?????/305 7.7.4 ???????/306 7.7.5 ??????/306 7.8 ????????/306 7.8.1 ???CSI Number /307 7.8.2 ???SR /307 7.8.3 TAR ??/307 7.8.4 ????/307 7.9 ????/308

    Read the article

  • EF4 POCO WCF Serialization problems (no lazy loading, proxy/no proxy, circular references, etc)

    - by kdawg
    OK, I want to make sure I cover my situation and everything I've tried thoroughly. I'm pretty sure what I need/want can be done, but I haven't quite found the perfect combination for success. I'm utilizing Entity Framework 4 RTM and its POCO support. I'm looking to query for an entity (Config) that contains a many-to-many relationship with another entity (App). I turn off lazy loading and disable proxy creation for the context and explicitly load the navigation property (either through .Include() or .LoadProperty()). However, when the navigation property is loaded (that is, Apps is loaded for a given Config), the App objects that were loaded already contain references to the Configs that have been brought to memory. This creates a circular reference. Now I know the DataContractSerializer that WCF uses can handle circular references, by setting the preserveObjectReferences parameter to true. I've tried this with a couple of different attribute implementations I've found online. It is needed to prevent the "the object graph contains circular references and cannot be serialized" error. However, it doesn't prevent the serialization of the entire graph, back and forth between Config and App. If I invoke it via WcfTestClient.exe, I get a stackoverflow (ha!) exception from the client and I'm hosed. I get different results from different invocation environments (C# unit test with a local reference to the web service appears to work ok though I still can drill back and forth between Configs and Apps endlessly, but calling it from a coldfusion environment only returns the first Config in the list and errors out on the others.) My main goal is to have a serialized representation of the graph I explicitly load from EF (ie: list of Configs, each with their Apps, but no App back to Config navigation.) NOTE: I've also tried using the ProxyDataContractResolver technique and keeping the proxy creation enabled from my context. This blows up complaining about unknown types encountered. I read that the ProxyDataContractResolver didn't fully work in Beta2, but should work in RTM. For some reference, here is roughly how I'm querying the data in the service: var repo = BootStrapper.AppCtx["AppMeta.ConfigRepository"] as IRepository<Config>; repo.DisableLazyLoading(); repo.DisableProxyCreation(); //var temp2 = repo.Include(cfg => cfg.Apps).Where(cfg => cfg.Environment.Equals(environment)).ToArray(); var temp2 = repo.FindAll(cfg => cfg.Environment.Equals(environment)).ToArray(); foreach (var cfg in temp2) { repo.LoadProperty(cfg, c => c.Apps); } return temp2; I think the crux of my problem is when loading up navigation properties for POCO objects from Entity Framework 4, it prepopulates navigation properties for objects already in memory. This in turn hoses up the WCF serialization, despite every effort made to properly handle circular references. I know it's a lot of information, but it's really standing in my way of going forward with EF4/POCO in our system. I've found several articles and blogs touching upon these subjects, but for the life of me, I cannot resolve this issue. Feel free to simply ask questions and help me brainstorm this situation. PS: For the sake of being thorough, I am injecting the WCF services using the HEAD build of Spring.NET for the fix to Spring.ServiceModel.Activation.ServiceHostFactory. However I don't think this is the source of the problem.

    Read the article

  • JS regex isn't matching, even thought it works with a regex tester

    - by Tom O
    I'm writing a piece of client-side javascript code that takes a function and finds the derivative of it, however, the regex that's supposed to match with the power rule fails to work in the context of the javascript program, even though it sucessfully matches when it's used with an independent regex tester. The browser I'm executing this on is Midori, and the operating system is Ubuntu 10.04 (Lucid Lynx). Here's the HTML page being used as the interface in addition to the code: Page: <html> <head> <title> Derivative Calculator </title> <script type="text/javascript" src="derivative.js"> </script> <body> <form action="" name=form> <input type=text name=f /> with respects to <input type=text name=vr size=7 /> <input type=button value="Derive!" onClick="main(this.form)" /> <br /> <input type=text name=result value="" /> </form> </body> </html> derivative.js: function main(form) { form.result.value = derive(form.f.value, form.vr.value); } function derive(f, v) { var atom = []; atom["sin(" + v + ")"] = "cos(" + v + ")"; atom["cos(" + v + ")"] = "-sin(" + v + ")"; atom["tan(" + v + ")"] = "sec^(2)(" + v + ")"; atom["sec(" + v + ")"] = "sec(" + v + ")*tan(" + v + ")"; atom["1/(cos(" + v + "))"] = "sec(" + v + ")*tan(" + v + ")"; atom["csc(" + v + ")"] = "-csc(" + v + ")*cot(" + v + ")"; atom["1/(sin(" + v + "))"] = "-csc(" + v + ")*cot(" + v + ")"; atom["cot(" + v + ")"] = "-csc^(2)(" + v + ")"; atom["1/(tan(" + v + "))"] = "-csc^(2)(" + v + ")"; atom["sin^(-1)(" + v + ")"] = "1/sqrt(1 - " + v + "^(2))"; atom["arcsin(" + v + ")"] = "1/sqrt(1 - " + v + "^(2))"; atom["cos^(-1)(" + v + ")"] = "-1/sqrt(1 - " + v + "^(2))"; atom["arccos(" + v + ")"] = "-1/sqrt(1 - " + v + "^(2))"; atom["tan^(-1)(" + v + ")"] = "1/(1 + " + v + "^(2))"; atom["arctan(" + v + ")"] = "1/(1 + " + v + "^(2))"; atom["sec^(-1)(" + v + ")"] = "1/(|" + v + "|*sqrt(" + v + "^(2) - 1))"; atom["arcsec(" + v + ")"] = "1/(|" + v + "|*sqrt(" + v + "^(2) - 1))"; atom["csc^(-1)(" + v + ")"] = "-1/(|" + v + "|*sqrt(" + v + "^(2) - 1))"; atom["arccsc(" + v + ")"] = "-1/(|" + v + "|*sqrt(" + v + "^(2) - 1))"; atom["cot^(-1)(" + v + ")"] = "-1/(1 + " + v + "^(2))"; atom["arccot(" + v + ")"] = "-1/(1 + " + v + "^(2))"; atom["ln(" + v + ")"] = "1/(" + v + ")"; atom["e^(" + v + ")"] = "e^(" + v + ")"; atom["ln(|" + v + "|)"] = "1/(" + v + ")"; atom[v] = "1"; var match = ""; if (new Boolean(atom[f]) == true) { return atom[f]; } else if (f.match(/^[0-9]+$/)) { return ""; } else if (f.match(/([\S]+)([\s]+)\+([\s]+)([\S]+)/)) { match = /([\S]+)([\s]+)\+([\s]+)([\S]+)/.exec(f); return derive(match[1], v) + " + " + derive(match[4], v); } else if (f.match(new RegExp("^([0-9]+)(" + v + ")$"))) { match = new RegExp("^([0-9]+)(" + v + ")$").exec(f); return match[1]; } else if (f.match(new RegExp("^([0-9]+)(" + v + ")\^([0-9]+)$"))) { match = new RegExp("^([0-9]+)(" + v + ")\^([0-9]+)$").exec(f); return String((match[1] * (match[3] - 1))) + v + "^" + String(match[3] - 1); } else { return "?"; } }

    Read the article

  • WCF timeouts are a nightmare

    - by Greg
    We have a bunch of WCF services that work almost all of the time, using various bindings, ports, max sizes, etc. The super-frustrating thing about WCF is that when it (rarely) fails, we are powerless to find out why it failed. Sometimes you will get a message that looks like this: System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '01:00:00'. --- System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. The problem is that the local socket timeout it's giving you is merely an attempt to be convenient. It may or may not be the cause of the problem. But OK, sometimes networks have issues. No big deal. We can retry or something. But here's the huge problem. On top of failing to tell you which precisely which timeout (if any) resulted in the failure ("your server-side receive timeout was exceeded," or something, would be helpful), WCF seems to have two types of timeouts. Timeout Type #1) A timeout, that, if increased, would increase the chance of your operation's success. So, the pertinent timeout is an hour, you are uploading a huge file that will take an hour and twenty minutes. It fails. You increase the timeout, it succeeds. I have no no problem with this type of timeout. Timeout Type #2) A timeout which merely defines how long you have to wait for the service to actually fail and give you an error, but modifying the value of this timeout has no impact on the chance of success. Basically, something happens during the first second of the service request which mucks things up. It will never recover. WCF doesn't magically retry the network connection for you. Fine, sometimes establishing a network connection doesn't go well. But, if your timeout is 2 hours, you have to wait 2 whole hours with no chance of it ever working before it finally acknowledges that it didn't work and gives you the error. But the error you see in both cases looks the same. With timeout Type #2, it still looks like you are running into a timeout. But, you could increase all of your timeouts to 4 years, and all it would do is make it take 4 years to get an error message. I know that Type #2 exists because I can do an operation that is known to complete in less than a minute when successful, and have it take 2 hours to fail. But, if I kill it and retry, it succeeds quickly. (If you are wondering why there might be a 2 hour timeout on an operation that takes less than a minute, there are times I run the operation with a much larger file and it could take over an hour.) So, to combat the problem with Type #2, you'd want your timeout to be really quick so you immediately know if there is a problem. Then you can retry. But the insurmountable problem is that because I don't know which timeouts are the cause of failure, I don't know what timeouts are Type #1 and which ones are Type #2. There may be one timeout (let's say the client-side send timeout) that acts like Type #1 in some cases and Type #2 in others. I have no idea, and I have no way of finding out. Does anyone know how to track down Type #2 timeouts so I can set them to low values without having to shorten actual (read: Type #1) timeouts and lower the chance of success? Thank you.

    Read the article

  • WPF TabItem Custom ContentTemplate

    - by lloydsparkes
    I have been strugging with this for a while, it would have been simple to do in WindowForms. I am making a IRC Client, there will be a number of Tabs one for each channel connect to. Each Tab needs to show a number of things, UserList, MessageHistory, Topic. In WindowForms i would just have inherited from TabItem, added some Custom Properties, and Controls, and done. In WPF i am having some slight issues with working out how to do it. I have tried many ways of doing it, and below is my current method, but i cannot get the TextBox to bind to the Topic Property. <Style TargetType="{x:Type t:IRCTabItem}" BasedOn="{StaticResource {x:Type TabItem}}" > <Setter Property="ContentTemplate"> <Setter.Value> <DataTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="540" /> <ColumnDefinition /> </Grid.ColumnDefinitions> <StackPanel Grid.Column="0"> <TextBox Text="{Binding Topic, RelativeSource={RelativeSource AncestorType={x:Type t:IRCTabItem}}}" /> </StackPanel> </Grid> </DataTemplate> </Setter.Value> </Setter> </Style> And the Codebehind public class IRCTabItem : TabItem { static IRCTabItem() { //This OverrideMetadata call tells the system that this element wants to provide a style that is different than its base class. //This style is defined in themes\generic.xaml //DefaultStyleKeyProperty.OverrideMetadata(typeof(IRCTabItem), // new FrameworkPropertyMetadata(typeof(IRCTabItem))); } public static readonly RoutedEvent CloseTabEvent = EventManager.RegisterRoutedEvent("CloseTab", RoutingStrategy.Bubble, typeof(RoutedEventHandler), typeof(IRCTabItem)); public event RoutedEventHandler CloseTab { add { AddHandler(CloseTabEvent, value); } remove { RemoveHandler(CloseTabEvent, value); } } public override void OnApplyTemplate() { base.OnApplyTemplate(); Button closeButton = base.GetTemplateChild("PART_Close") as Button; if (closeButton != null) closeButton.Click += new System.Windows.RoutedEventHandler(closeButton_Click); } void closeButton_Click(object sender, System.Windows.RoutedEventArgs e) { this.RaiseEvent(new RoutedEventArgs(CloseTabEvent, this)); } public bool Closeable { get; set; } public static readonly DependencyProperty CloseableProperty = DependencyProperty.Register("Closeable", typeof(bool), typeof(IRCTabItem), new FrameworkPropertyMetadata(true, FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); public List<String> UserList { get; set; } public static readonly DependencyProperty UserListProperty = DependencyProperty.Register("UserList", typeof(List<String>), typeof(IRCTabItem), new FrameworkPropertyMetadata(new List<String>(), FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); public String Topic { get; set; } public static readonly DependencyProperty TopicProperty = DependencyProperty.Register("Topic", typeof(String), typeof(IRCTabItem), new FrameworkPropertyMetadata("Not Connected", FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); public bool HasAlerts { get; set; } public static readonly DependencyProperty HasAlertsProperty = DependencyProperty.Register("HasAlerts", typeof(bool), typeof(IRCTabItem), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); } So my questions are: Am i doing it the right way (best practices)? If so how can i bind DataTemplate to Properties? If not so, what is the correct way of achieve what i am trying to achieve?

    Read the article

  • Exception Errno::EPIPE in Passenger RequestHandler (Broken pipe)

    - by Millisami
    Hi, Upgraded to Rails 2.3.2 and Passenger 2.2.4 on Ubuntu hardy slice at slicehost with Apache2 I'm getting this same above discussed error in my Apache error.log of system /var/logs/apache2/ [ pid=4249 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:47:32.752 ]: No data received from the backend application (process 4383) within 45000 msec. Either the backend application is frozen, or your TimeOut value of 45 seconds is too low. Please check whether your application is frozen, or increase the value of the TimeOut configuration directive. *** Exception Errno::EPIPE in Passenger RequestHandler (Broken pipe) (process 4391): from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/rack/request_handler.rb:93:in `write' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/rack/request_handler.rb:93:in `process_request' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_request_handler.rb:206:in `main_loop' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:376:in `start_request_handler' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:334:in `handle_spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/utils.rb:182:in `safe_fork' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:332:in `handle_spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `__send__' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `main_loop' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:195:in `start_synchronously' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:162:in `start' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:213:in `start' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:261:in `spawn_rails_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server_collection.rb:126:in `lookup_or_add' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:255:in `spawn_rails_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server_collection.rb:80:in `synchronize' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server_collection.rb:79:in `synchronize' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:254:in `spawn_rails_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:153:in `spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:286:in `handle_spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `__send__' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `main_loop' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:195:in `start_synchronously' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/bin/passenger-spawn- server:61 *** Exception Errno::EPIPE in Passenger RequestHandler (Broken pipe) (process 4383): and these too. pid=4362 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:55:19.251 ]: No data received from the backend application (process 4383) within 45000 msec. Either the backend application is frozen, or your TimeOut value of 45 seconds is too low. Please check whether your application is frozen, or increase the value of the TimeOut configuration directive. [ pid=4298 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:55:19.255 ]: No data received from the backend application (process 4252) within 45000 msec. Either the backend application is frozen, or your TimeOut value of 45 seconds is too low. Please check whether your application is frozen, or increase the value of the TimeOut configuration directive. [Sat Jul 04 11:55:19 2009] [error] [client 86.96.226.13] Premature end of script headers: 41, referer: http://domain.com/ [ pid=4373 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:55:19.559 ]: Its getting me mad and on the browser, sometimes its show and when refreshed, Application Error 500 shows up in frequent basis. any directions??

    Read the article

  • WPF Layout algorithm woes - control will resize, but not below some arbitrary value.

    - by Quantumplation
    I'm working on an application for a client, and one of the requirements is the ability to make appointments, and display the current week's appointments in a visual format, much like in Google Calender's or Microsoft Office. I found a great (3 part) article on codeproject, in which he builds a "RangePanel", and composes one for each "period" (for example, the work day.) You can find part 1 here: http://www.codeproject.com/KB/WPF/OutlookWpfCalendarPart1.aspx The code presents, but seems to choose an arbitrary height value overall (440.04), and won't resize below that without clipping. What I mean to say, is that the window/container will resize, but it just cuts off the bottom of the control, instead of recalculating the height of the range panels, and the controls in the range panels representing the appointment. It will resize and recalculate for greater values, but not less. Code-wise, what's happening is that when you resize below that value, first the "MeasureOverride" is called with the correct "new height". However, by the time the "ArrangeOverride" method is called, it's passing the same 440.04 value as the height to arrange to. I need to find a solution/workaround, but any information that you can provide that might direct me for things to look into would also be greatly appreciated ( I understand how frustrating it is to debug code when you don't have the codebase in front of you. :) ) The code for the various Arrange and Measure functions are provided below. The "CalendarView" control has a "CalendarViewContentPresenter", which handles several periods. Then, the periods have a "CalendarPeriodContentPresenter", which handles each "block" of appointments. Finally, the "RangePanel" has it's own implementation. (To be honest, i'm still a bit hazy on how the control works, so if my explanations are a bit hazy, the article I linked probably has a more cogent explanation. :) ) CalendarViewContentPresenter: protected override Size ArrangeOverride(Size finalSize) { int columnCount = this.CalendarView.Periods.Count; Size columnSize = new Size(finalSize.Width / columnCount, finalSize.Height); double elementX = 0; foreach (UIElement element in this.visualChildren) { element.Arrange(new Rect(new Point(elementX, 0), columnSize)); elementX = elementX + columnSize.Width; } return finalSize; } protected override Size MeasureOverride(Size constraint) { this.GenerateVisualChildren(); this.GenerateListViewItemVisuals(); // If it's coming back infinity, just return some value. if (constraint.Width == Double.PositiveInfinity) constraint.Width = 10; if (constraint.Height == Double.PositiveInfinity) constraint.Height = 10; return constraint; } CalendarViewPeriodPersenter: protected override Size ArrangeOverride(Size finalSize) { foreach (UIElement element in this.visualChildren) { element.Arrange(new Rect(new Point(0, 0), finalSize)); } return finalSize; } protected override Size MeasureOverride(Size constraint) { this.GenerateVisualChildren(); return constraint; } RangePanel: protected override Size ArrangeOverride(Size finalSize) { double containerRange = (this.Maximum - this.Minimum); foreach (UIElement element in this.Children) { double begin = (double)element.GetValue(RangePanel.BeginProperty); double end = (double)element.GetValue(RangePanel.EndProperty); double elementRange = end - begin; Size size = new Size(); size.Width = (Orientation == Orientation.Vertical) ? finalSize.Width : elementRange / containerRange * finalSize.Width; size.Height = (Orientation == Orientation.Vertical) ? elementRange / containerRange * finalSize.Height : finalSize.Height; Point location = new Point(); location.X = (Orientation == Orientation.Vertical) ? 0 : (begin - this.Minimum) / containerRange * finalSize.Width; location.Y = (Orientation == Orientation.Vertical) ? (begin - this.Minimum) / containerRange * finalSize.Height : 0; element.Arrange(new Rect(location, size)); } return finalSize; } protected override Size MeasureOverride(Size availableSize) { foreach (UIElement element in this.Children) { element.Measure(availableSize); } // Constrain infinities if (availableSize.Width == double.PositiveInfinity) availableSize.Width = 10; if (availableSize.Height == double.PositiveInfinity) availableSize.Height = 10; return availableSize; }

    Read the article

  • Combined SOAP/JSON/XML in WCF, using UriTemplate

    - by gregmac
    I'm trying to build a generic web service interface using WCF, to allow 3rd party developers to hook into our software. After much struggling and reading (this question helped a lot), I finally got SOAP, JSON and XML (POX) working together. To simplify, here's my code (to make this example simple, I'm not using interfaces -- I did try this both ways): <ServiceContract()> _ Public Class TestService Public Sub New() End Sub <OperationContract()> _ <WebGet()> _ Public Function GetDate() As DateTime Return Now End Function '<WebGet(UriTemplate:="getdateoffset/{numDays}")> _ <OperationContract()> _ Public Function GetDateOffset(ByVal numDays As Integer) As DateTime Return Now.AddDays(numDays) End Function End Class and the web.config code: <services> <service name="TestService" behaviorConfiguration="TestServiceBehavior"> <endpoint address="soap" binding="basicHttpBinding" contract="TestService"/> <endpoint address="json" binding="webHttpBinding" behaviorConfiguration="jsonBehavior" contract="TestService"/> <endpoint address="xml" binding="webHttpBinding" behaviorConfiguration="poxBehavior" contract="TestService"/> <endpoint address="mex" contract="IMetadataExchange" binding="mexHttpBinding" /> </service> </services> <behaviors> <endpointBehaviors> <behavior name="jsonBehavior"> <enableWebScript/> </behavior> <behavior name="poxBehavior"> <webHttp /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="TestServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> This actually works -- I'm able to go to TestService.svc/xml/GetDate for xml, TestService.svc/json/GetDate for json, and point a SOAP client at TestService.svc?wsdl and have the SOAP queries work. The part I'd like to fix is the queries. I have to use TestService.svc/xml/GetDateOffset?numDays=4 instead of TestService.svc/xml/GetDateOffset/4. If I specify the UriTemplate, I get the error: Endpoints using 'UriTemplate' cannot be used with 'System.ServiceModel.Description.WebScriptEnablingBehavior'. But of course without using <enableWebScript/>, JSON doesn't work. The only other thing I've seen that I think will work is making 3 different services (.svc files), that all implement an interface that specifies the contract, but in the classes specify different WebGet/WebInvoke attributes on each class. This seems like a lot of extra work, that frankly, I don't see why the framework doesn't handle for me. The implementation of the classes would all be the same, except for the attributes, which means over time it would be easy for bugs/changes to get fixed/done in one implementation but not the others, leading to inconsistent behaviour when using the JSON vs SOAP implementation for example. Am I doing something wrong here? Am I taking a totally wrong approach and misusing WCF? Is there a better way to do this? With my experience doing web stuff, I think it should be possible for some kind of framework to handle this ... I even have an idea in my head of how to build it. It just seems like WCF is supposed to be doing this, and I don't really want to reinvent the wheel.

    Read the article

  • mexTcpBinding in WCF - IMetadataExchange errors

    - by David
    I'm wanting to get a WCF-over-TCP service working. I was having some problems with modifying my own project, so I thought I'd start with the "base" WCF template included in VS2008. Here is the initial WCF App.config and when I run the service the WCF Test Client can work with it fine: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" /> </system.web> <system.serviceModel> <services> <service name="WcfTcpTest.Service1" behaviorConfiguration="WcfTcpTest.Service1Behavior"> <host> <baseAddresses> <add baseAddress="http://localhost:8731/Design_Time_Addresses/WcfTcpTest/Service1/" /> </baseAddresses> </host> <endpoint address="" binding="wsHttpBinding" contract="WcfTcpTest.IService1"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="WcfTcpTest.Service1Behavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> This works perfectly, no issues at all. I figured changing it from HTTP to TCP would be trivial: change the bindings to their TCP equivalents and remove the httpGetEnabled serviceMetadata element: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" /> </system.web> <system.serviceModel> <services> <service name="WcfTcpTest.Service1" behaviorConfiguration="WcfTcpTest.Service1Behavior"> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1337/Service1/" /> </baseAddresses> </host> <endpoint address="" binding="netTcpBinding" contract="WcfTcpTest.IService1"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexTcpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="WcfTcpTest.Service1Behavior"> <serviceDebug includeExceptionDetailInFaults="True" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> But when I run this I get this error in the WCF Service Host: System.InvalidOperationException: The contract name 'IMetadataExchange' could not be found in the list of contracts implemented by the service Service1. Add a ServiceMetadataBehavior to the configuration file or to the ServiceHost directly to enable support for this contract. I get the feeling that you can't send metadata using TCP, but that's the case why is there a mexTcpBinding option?

    Read the article

  • Apache DS fails to list users

    - by CuriousMind
    Apache ds fails to list the users INFO | jvm 1 | 2012/03/28 15:54:04 | java.lang.Error: ERR_546 CRITICAL: page header magic for block 59 not OK 0 INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageHeader.(PageHeader.java:95) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageHeader.getView(PageHeader.java:124) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageManager.getNext(PageManager.java:234) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageCursor.next(PageCursor.java:104) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PhysicalRowIdManager.fetch(PhysicalRowIdManager.java:158) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.BaseRecordManager.fetch(BaseRecordManager.java:324) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.CacheRecordManager.fetch(CacheRecordManager.java:262) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.loadBPage(BPage.java:899) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.childBPage(BPage.java:890) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.find(BPage.java:284) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.find(BPage.java:285) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BTree.find(BTree.java:408) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmTable.get(JdbmTable.java:395) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmMasterTable.get(JdbmMasterTable.java:155) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmStore.lookup(JdbmStore.java:1332) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmStore.lookup(JdbmStore.java:70) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.EqualityEvaluator.evaluate(EqualityEvaluator.java:126) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.AndCursor.matches(AndCursor.java:234) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.AndCursor.next(AndCursor.java:143) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.AndCursor.next(AndCursor.java:139) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.ServerEntryCursorAdaptor.next(ServerEntryCursorAdaptor.java:178) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.filtering.BaseEntryFilteringCursor.next(BaseEntryFilteringCursor.java:499) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.readResults(SearchHandler.java:314) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.doSimpleSearch(SearchHandler.java:749) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.handleIgnoringReferrals(SearchHandler.java:978) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.handleIgnoringReferrals(SearchHandler.java:78) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.ReferralAwareRequestHandler.handle(ReferralAwareRequestHandler.java:83) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.ReferralAwareRequestHandler.handle(ReferralAwareRequestHandler.java:57) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.LdapRequestHandler.handleMessage(LdapRequestHandler.java:208) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.LdapRequestHandler.handleMessage(LdapRequestHandler.java:58) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.handler.demux.DemuxingIoHandler.messageReceived(DemuxingIoHandler.java:232) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.LdapProtocolHandler.messageReceived(LdapProtocolHandler.java:193) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain$TailFilter.messageReceived(DefaultIoFilterChain.java:713) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain.callNextMessageReceived(DefaultIoFilterChain.java:434) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain.access$1200(DefaultIoFilterChain.java:46) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain$EntryImpl$1.messageReceived(DefaultIoFilterChain.java:793) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.IoFilterEvent.fire(IoFilterEvent.java:71) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.session.IoEvent.run(IoEvent.java:63) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.filter.executor.UnorderedThreadPoolExecutor$Worker.runTask(UnorderedThreadPoolExecutor.java:480) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.filter.executor.UnorderedThreadPoolExecutor$Worker.run(UnorderedThreadPoolExecutor.java:434) INFO | jvm 1 | 2012/03/28 15:54:04 | at java.lang.Thread.run(Thread.java:619) INFO | jvm 1 | 2012/03/28 15:54:04 | [15:54:04] WARN [org.apache.directory.server.ldap.LdapProtocolHandler] - Null LdapSession given to cleanUpSession. INFO | jvm 1 | 2012/03/28 15:55:20 | [15:55:20] WARN [org.apache.directory.server.ldap.LdapProtocolHandler] - Unexpected exception forcing session to close: sending disconnect notice to client.

    Read the article

  • Trouble determining proper decoding of a REST response from an ArcGIS REST service using IHttpModule

    - by Ryan Taylor
    First a little background on what I am trying to achieve. I have an application that is utilizing REST services served by ArcGIS Server and IIS7. The REST services return data in one of several different formats. I am requesting a JSON response. I want to be able to modify the response (remove or add parameters) before the response is sent to the client. However, I am having difficulty converting the stream to a string that I can modify. To that end, I have implemented the following code in order to try to inspect the stream. SecureModule.cs using System; using System.Web; namespace SecureModuleTest { public class SecureModule : IHttpModule { public void Init(HttpApplication context) { context.BeginRequest += new EventHandler(OnBeginRequest); } public void Dispose() { } public void OnBeginRequest(object sender, EventArgs e) { HttpApplication application = (HttpApplication) sender; HttpContext context = application.Context; HttpRequest request = context.Request; HttpResponse response = context.Response; response.Filter = new ServicesFilter(response.Filter); } } } ServicesFilter.cs using System; using System.IO; using System.Text; namespace SecureModuleTest { class ServicesFilter : MemoryStream { private readonly Stream _outputStream; private StringBuilder _content; public ServicesFilter(Stream output) { _outputStream = output; _content = new StringBuilder(); } public override void Write(byte[] buffer, int offset, int count) { _content.Append(Encoding.UTF8.GetString(buffer, offset, count)); using (TextWriter textWriter = new StreamWriter(@"C:\temp\content.txt", true)) { textWriter.WriteLine(String.Format("Buffer: {0}", _content.ToString())); textWriter.WriteLine(String.Format("Length: {0}", buffer.Length)); textWriter.WriteLine(String.Format("Offset: {0}", offset)); textWriter.WriteLine(String.Format("Count: {0}", count)); textWriter.WriteLine(""); textWriter.Close(); } // Modify response _outputStream.Write(buffer, offset, count); } } } The module is installed in the /ArcGIS/rest/ virtual directory and is executed via the following GET request. http://localhost/ArcGIS/rest/services/?f=json&pretty=true The web page displays the expected response, however, the text file tells a very different (encoded?) story. Expect Response {"currentVersion" : "10.0", "folders" : [], "services" : [ ] } Text File Contents Buffer: ? ?`I?%&/m?{J?J??t??`$?@??????iG#)?*??eVe]f@????{???{???;?N'????\fdl??J??!????~|?"~?G?u]???'?)??G?????G??7N????W??{?????,??|?OR????q? Length: 4096 Offset: 0 Count: 168 Buffer: ? ?`I?%&/m?{J?J??t??`$?@??????iG#)?*??eVe]f@????{???{???;?N'????\fdl??J??!????~|?"~?G?u]???'?)??G?????G??7N????W??{?????,??|?OR????q?K???!P Length: 4096 Offset: 0 Count: 11 Interestingly, Fiddler depicts a similar picture. Fiddler Request GET http://localhost/ArcGIS/rest/services/?f=json&pretty=true HTTP/1.1 Host: localhost Connection: keep-alive User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4 Referer: http://localhost/ArcGIS/rest/services Cache-Control: no-cache Pragma: no-cache Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Cookie: a=mWz_JFOusuGPnS3w5xx1BSUuyKGB3YZo92Dy2SUntP2MFWa8MaVq6a4I_IYBLKuefXDZANQMeqvxdGBgQoqTKz__V5EQLHwxmKlUNsaK7do. Fiddler Response - Before Clicking Decode HTTP/1.1 200 OK Content-Type: text/plain;charset=utf-8 Content-Encoding: gzip ETag: 719143506 Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Thu, 10 Jun 2010 01:08:43 GMT Content-Length: 179 ????????`I?%&/m?{J?J??t??`$?@??????iG#)?*??eVe]f@????{???{???;?N'????\fdl??J??!????~|?"~?G?u]???'?)??G?????G??7N????W??{?????,??|?OR????q?K???! P??? Fiddler Response - After Clicking Decode HTTP/1.1 200 OK Content-Type: text/plain;charset=utf-8 ETag: 719143506 Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Thu, 10 Jun 2010 01:08:43 GMT Content-Length: 80 {"currentVersion" : "10.0", "folders" : [], "services" : [ ] } I think that the problem may be a result of compression and/or chunking of data (this might be why I am receiving two calls to ServicesFilter.Write(...), however, I have not yet been able to solve the issue. How might I decode, unzip, and otherwise convert the byte stream into the string I know it should be for modification by my filter?

    Read the article

  • HOWTO: disable jmx in activemq network of brokers (spring, xbean)

    - by subes
    Since I've struggled a lot with this problem, I am posting my solution. Disabling jmx in an activemq network of brokers removes race conditions about the registration of the jmx connector. When starting multiple activemq servers on the same machine: Failed to start jmx connector: Cannot bind to URL [rmi://localhost:1099/jmxrmi]: javax.naming.NameAlreadyBoundException: jmxrmi [Root exception is java.rmi.AlreadyBoundException: jmxrmi] Another problem with this is, that even if you don't cause a race condition, this exception can still occur. Even when starting one broker after another while waiting for them to initialize properly in between. If one process is run by root as the first instance and the other as a normal user, somehow the user process tries to register its own jmx connector, though there already is one. Or another exception which happens when the broker that successfully registered the jmx connector goes down: Failed to start jmx connector: Cannot bind to URL [rmi://localhost:1099/jmxrmi]: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection refused] Those exceptions cause the network of brokers to stop working, or to not work at all. The trick to disable jmx was, that jmx had to be disabled in the connectionfactory aswell. The documentation http://activemq.apache.org/jmx.html does not say that this is needed explicitly. So I had to struggle for 2 days until I found the solution: <beans xmlns="http://www.springframework.org/schema/beans" xmlns:amq="http://activemq.apache.org/schema/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core-5.3.1.xsd"> <!-- Spring JMS Template --> <bean id="jmsTemplate" class="org.springframework.jms.core.JmsTemplate"> <constructor-arg ref="connectionFactory" /> </bean> <!-- Caching, sodass das jms template überhaupt nutzbar ist in sachen performance --> <bean id="connectionFactory" class="org.springframework.jms.connection.CachingConnectionFactory"> <constructor-arg ref="amqConnectionFactory" /> <property name="exceptionListener" ref="jmsExceptionListener" /> <property name="sessionCacheSize" value="1" /> </bean> <!-- Jeder Client verbindet sich mit seinem eigenen broker, broker sind untereinander vernetzt. Nur wenn hier nochmals jmx deaktiviert wird, bleibt es auch deaktiviert... --> <amq:connectionFactory id="amqConnectionFactory" brokerURL="vm://broker:default?useJmx=false" /> <!-- Broker suchen sich einen eigenen Port und sind gegenseitig verbunden, ergeben dadurch ein Grid. Dies zwar etwas langsamer, aber dafür ausfallsicherer. Siehe http://activemq.apache.org/networks-of-brokers.html --> <amq:broker useJmx="false" persistent="false"> <!-- Wird benötigt um JMX endgültig zu deaktivieren --> <amq:managementContext> <amq:managementContext connectorHost="localhost" createConnector="false" /> </amq:managementContext> <!-- Nun die normale Konfiguration für Network of Brokers --> <amq:networkConnectors> <amq:networkConnector networkTTL="1" duplex="true" dynamicOnly="true" uri="multicast://default" /> </amq:networkConnectors> <amq:persistenceAdapter> <amq:memoryPersistenceAdapter /> </amq:persistenceAdapter> <amq:transportConnectors> <amq:transportConnector uri="tcp://localhost:0" discoveryUri="multicast://default" /> </amq:transportConnectors> </amq:broker> With this, there is no need to specify -Dcom.sun.management.jmxremote=false for the jvm. Which somehow also didn't work for me, because the connectionfactory started the jmx connector.

    Read the article

< Previous Page | 803 804 805 806 807 808 809 810 811 812 813 814  | Next Page >