Search Results

Search found 2589 results on 104 pages for 'dell r710'.

Page 81/104 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• Any ramifications to disabling ClearPageFile

  - by user34710

  I am runing a Dell XPS 15z with a quad core I7, 8gb ram, 7200rpm hdd, windows 7 ultimate. My laptop was taking around 3 minutes to shut down, which seemed far too high to me. I did a bit of investigation, and it seemed that the ClearPageFile reg entry was set to 1, meaning that upon shutdown my pagefile.sys was being cleared before actually shutting the machine down. When I disable this setting, my laptop shuts down in about 20 seconds - clearly a big gain. My question is, are there any side effects of having this turned off (other than the security risk of the HDD being stolen, and still having any important info that was in the RAM up for grabs)?

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• Overheating on Ubuntu 12.04

  - by mati

  I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

  Read the article

• Is a computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• X server not starting up after new kernel compilation

  - by tech_learner

  I have compiled the Kernel on my 64-bit Debian XPS Studio 1340 Dell system. srikanth@debian:~ - 05:40:52 PM - $ uname -a Linux debian 2.6.32-5-amd64 #1 SMP Thu Mar 22 17:26:33 UTC 2012 x86_64 GNU/Linux Kernel version that I have used and compiled from kernel.org is 2.6.35.13 I have nvidia installed on old kernel. I got the old config and I used the same config to compile the new kernel. Everything went well and I got two debian packages ( image and headers ) which I have installed on my system. When I select the new kernel on the boot menu and I go into it, the X server is not starting up possibly because I have to "rebuild" ( not sure how to do that ) according to this link: http://www.linuxquestions.org/questions/slackware-14/x-server-not-starting-after-kernel-compilation-605265/ Can you suggest how to do the rebuild on nvidia module so that I can start x ( without seeing any blank screen or error saying nvidia module is missing ) ? PS: The link that I have used to compile the kernel is https://help.ubuntu.com/community/Kernel/Compile#Alternate_Build_Method:_The_Old-Fashioned_Debian_Way

  Read the article

• Is it possible to change the motherboard/bios vendor name? [closed]

  - by vignesh4303

  Possible Duplicate: How can I change my BIOS splashscreen? When we start the system we normally used to get the motherboard/vendor name for e.g i'm having the system with mercury motherboard whenever i restart my system the mercury logo will get displayed(you ll have respected vendors) and the regular process will go on .. my question is Is it there any possibility to change the name and logo of mercury(on my system &it differs based on your motherboard you are using ) on start up? if you are an laptop user "you can see the laptop vendor name e.g "dell" " For asus user's refer Bon Gart's comment ,I am in search of answer those whom feel frustrated about the motherboard/bios splash screen and whom feel to change it

  Read the article

• FreeBSD 9 (amd64) reboot/shutdown process is very slow

  - by nbari

  I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

  Read the article

• How to create Restoration Partion?

  - by Fellknight

  For some time now, when buying new computers (laptops in particular) from big name brands-like DELL, HP, TOSHIBA, etc.-most of them come with a "rescue" or "restore" partion instead of installation CD/DVD. Said partitions have everything needed to rebuild the factory installed OS, unfortunately they also include all crapware that the OEM installed on the machine. Is it there a way to custom create such a partition with out all the useless software included?. They seem quite appealing considering they only use about 10GB-20GB of space and offer the pretty much the same functionality as a complete system image/backup.

  Read the article

• Best Server Ghost-Like Tool For Windows

  - by John Dibling

  I'm looking for advice on which tool we should use to clone servers. In the short term, we will be cloning identical hardware but in the long run we may want to create one image and replicate that on a different class of machine. For example, as new servers are released from Dell, we will want to continue to use the same image we already made. Right now our servers are Windows (Server 2008 & Server 2008 R2), but moving forward we may need Linux support as well. Ghost Solution Suite 2.5 seems to be the canonical tool. Are there alternatives? Recommendations/reviews?

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• Windows 7 Line In Delay Issue [closed]

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• What could cause a file system to spontaneously unmount or become invalid for a short time?

  - by Ichorus

  We've got DB2 LUW running on a RHEL box. We had a crash of DB2 and IBM came back and said that a file that DB2 was trying to access (through open64()) unmounted or became invalid. We have done nothing but restart the database and things seem to be running fine. Also, the file in question looks perfectly normal now: $ cd /db/log/TEAMS/tmsinst/NODE0000/TEAMS/T0000000/ $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT $ file C0000000.CAT C0000000.CAT: data $ lsattr C0000000.CAT ------------- C0000000.CAT $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT With those facts in hand (please correct me if I am mis-interpreting the data at hand) what could cause a file system to 'spontaneously unmount or become invalid for a short time'? What should my next step be? This is on Dell hardware and we ran their diagnostic tools against the hardware and it came back clean.

  Read the article

• Laptop changes resolution when the lid is closed/opened

  - by RedditGuy

  hi i've had a problem for the last couple of days where the resolution on my laptop changes when i close the lid i'm running windows xp professional sp2 on a dell inspiron 1501 the video chip is an ati radeon xpress 1150 according to the catalyst control center software i've got installed which i think came with the drivers or something i've seen this happen before but i installed an old game called road rash a couple days ago after seeing it mentioned on reddit and i'm wondering if it might be related anyone know how i can stop this from happening? i have a workaround where i can manually change the resolution to something else and then change it back but that's a lot of work to do every time i close the laptop which is a lot thanks!

  Read the article

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Windows 7/8 can't connect to an N Router

  - by xenoterracide

  I have a router running OpenWRT backfire, with N and A/B/G being broadcast. A linux laptop, and a Mac laptop can see the N network and connect to it (or at least they could last weekend). But there is now a Windows 7 Desktop with a B/G/N wireless card, and a Windows 8 Laptop with a B/G/N wireless card that can't see the N network only the B/G broadcast. The B/G and N have different SSID's and Encryption ( WEP and WPA2 PSK respectively ). The N SSID isn't even visible. Does anyone have any suggestions as to how to troubleshoot further? Or what might be the cause? update wireless info Desktop Dell Wireless 1502 802.11b/g/n Atheros Communications Inc 9.2.0.412

  Read the article

• second monitor wont display

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• How to install windows on a server with no CD or DVD drive

  - by user29266

  I've found a few posts on this site, however my situation is different. I have a new Dell server with no OS installed. I would like to install Windows 2008 Web Edition. I have a few USB ports and Ethernet. No CD or DVD drives. Is this article the best & only way to proceed? Installing Windows 2008 via USB thumbdrive or should I just get a external hardrive and hook it up to a usb. Once the OS is installed I'll never need a DVD drive again - so that's idea is a waste of money.

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• Logitech USB keyboard driver not found on Windows 7 x64

  - by AngCaruso

  I have a Logitech Internet 350 Keyboard which has been working fine on my Lenovo T400 laptop for well over three years. Just within the past week or so, Windows 7 can no longer find the driver for it. There is no custom driver from Logitech for this device -- it uses the generic Windows USB HID driver. The keyboard works just fine from the BIOS (and Linux which I dual boot this machine), but Windows 7 cannot find or load the driver for it. Any ideas? I smell a Windows update problem, but have no idea how to fix it, and I really am not interested in rolling back updates. New Info: I just tested a generic Dell USB keyboard and it worked just find, with Windows immediately recognizing the device and installing the HID keyboard class driver. So, it seems that Windows has decided not to recognize my specific Logitech keyboard device. I still suspect a Windows update issue, but I would love to hear other suggestions.

  Read the article

• XP Laptop Restarting

  - by Liath

  I have a Dell 1525 which I reinstalled xp on recently due to a hard disk problem. Apparently I've missed something, it's taken to restarting for no apparent reason (I believe it's too frequent for windows updates which was my first thought). Last night it was particularly bad, it stopped 5 times in 2 hours while playing an online game. I can't actually think of a time it's happened when it's not running something in full screen mode. I can't see anything in the event log apart from usual start up details. How can I find and fix this issue?

  Read the article

• Linux cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem. I have also tried the Ubuntu "install in Windows" option and could not get it to work. EDIT: Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >