Search Results

Search found 2602 results on 105 pages for 'dell vostro'.

Page 81/105 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

• Missing Jumbo and MTU for Broadcom NIC?

  - by Mike

  I have two Broadcom BCM5708C NetXtreme II GigE NICs in my Dell Windows SBS 2008 server. I would like make one them them Jumbo Frames enabled so that I can add it to my SAN whose VLAN on the switch is already using 9000 MTU. Broadcom's own data sheet for this NIC claims that it is Jumbo Frame capable up to a 9000 MTU. The problem is that there is no setting for Jumbo or MTU in the NIC's configurable settings. There are other settings but just not the one I need to change. Am I missing something here? The driver claims to be up-to-date when I allow Windows to search on-line.

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• How can you convert audio (3.5mm) to S/PDIF?

  - by SSumner

  I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

  Read the article

• Why can't I create a Windows backup on my secondary disk?

  - by Brian Sullivan

  I've installed Windows 7 Ultimate on an SSD that I've added to the XPS desktop that I bought from Dell. I would like to use the built-in backup functionality to create incremental backups and store them on the large drive that came with the machine. I formatted the large drive and turned it into a Basic disk. However, when I try to set the backup location to the large internal disk (E:\) in the "Set up backup" wizard, a get a message saying, "A system image cannot be saved on a drive that your computer boots from or that Windows is installed on." Windows is not installed on that disk. I even deleted the OEM partition that was on the disk, and removed it completely from the boot order in the BIOS. Any clue why Windows is griping at me about this?

  Read the article

• No sigal showing on LCD TV when Conects Leptop via VGA Cable [migrated]

  - by Amit Prajapati

  I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

  Read the article

• Why does the Mac OS X (10.6) Finder stop being able to connect to Windows computers?

  - by Drarok

  We have one Mac (a MacBook Pro Unibody) amongst our Windows machines which connects to the "server" (actually a Dell running Windows XP Pro) to access documents. This works just fine most of the time, but sometimes after waking from sleep, it cannot connect to any Windows computer on the network. There are no errors (nor even any messages) in the Console application when attempting to connect either by the Finder's network browsing, nor when using the "Connect To Server" menu. I have tried "Relaunch" on Finder, toggled File Sharing, disabled and re-enabled the Airport, but nothing makes the Mac able to connect again until I reboot it! Other computers can connect to the machines, so it is definitely the Mac at fault. Are there any workarounds that anyone has found? Is there perhaps a way to re-start the samba client?

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Database or website of kernel config files ?

  - by Kami

  I've experienced some kernel panic after trying to compile gentoo kernel for a Sun UltraSPARC T5120 Server. The kernel panic came from a missing support for the SAS disk controller in the menu config. I've wasted so much time because I had no clue about the hardware I was using. I know that the kernel config depends on what you plan to do with your machine but I want to have a configuration file that at least match my hardware ! Is there a website or database that provides menuconfig's kernel configuration files for known or branded hardware like Dell Server or Apple computers ?

  Read the article

• Automatic driver search & update on Windows?

  - by Ben

  I have a Dell laptop issued by my employer, and I always find it a real pain to search for, download and maintain their drivers. It baffles me that there does not seem to be a nice way (product, website, ...) to just download the stuff you need, without hassle. The same goes for the other Windows based laptops in my direct environment. Are there any (preferably free) automated solutions available? Or do you have a nice workflow - other than searching the manufacturers website - to help smoothing this process?

  Read the article

• memtest86+ crashing on server

  - by user148723

  we have a few DELL 1950 servers. 1 of this servers has CentOS6.3 and its randomly rebooting so I suspected it was hardware. (no log generated) the other 4 servers do not randomly reboot. We passed memtest86+ on the 5 servers, and on 3 of them memtest86+ crashes (displaying an odd and colorful screen, like if a video card failed) Although I tested old memtest86 (not +), and all servers did not crash. I also tested other RAM testers utilities, no tool failing. have any of you guys experience this? thanks

  Read the article

• Installing Windows XP with pre installed Windows 7

  - by user243680

  Hello! I want to install Windows XP on my dell laptop which has pre installed Windows7 on it. I want windows Xp on my system because of my project issue. Now the problem is Windows7 does not allow to install Windows Xp on my system. I dont mind if windows 7 gets replaced by Windows XP,all i want is windows XP on my system.I am not getting the way to install XP. Can anyone guide me how to install Windows XP on my laptop? i need an urgent help.

  Read the article

• Is there a pressure sensitive stylus for windows 8 power capacitative screen devices?

  - by JohnnyM

  I own a Dell XPS 12 Duo (filp-screen ultrabook with 10-point cap. screen) with Windows 8. Note: The ultrabook has Bluetooth 4.0. I would really love to have a preassure sensitive stylus that I could use to draw on the capacitative screen, when in tablet mode. So far I couldn't find any that would be compatible with Windows 8, maybe you guys could help. Must have: works with capacitative screen windows 8 compatible pressure sensitive Important: thin tip Nice to have: palm rejection tilt sensitive extra buttons (lots of them) TIA

  Read the article

• Any ramifications to disabling ClearPageFile

  - by user34710

  I am runing a Dell XPS 15z with a quad core I7, 8gb ram, 7200rpm hdd, windows 7 ultimate. My laptop was taking around 3 minutes to shut down, which seemed far too high to me. I did a bit of investigation, and it seemed that the ClearPageFile reg entry was set to 1, meaning that upon shutdown my pagefile.sys was being cleared before actually shutting the machine down. When I disable this setting, my laptop shuts down in about 20 seconds - clearly a big gain. My question is, are there any side effects of having this turned off (other than the security risk of the HDD being stolen, and still having any important info that was in the RAM up for grabs)?

  Read the article

• SQL server environment

  - by Olegas D

  Hello I'm considering a bit of changes in current sales environment. And trying to check all cons and pros. Current situation. SQL server (quite decent HP server - server1) + backup server (smaller Dell server - server2). all sql files and sql server itself are on the server1. If something goes wrong with server1 I will have to manually move to server2. Connecting to the sql server: 1 HQ (where server located) + 4 sites through VPN. Now I'm considering 2 scenarios: Buy some storage system + update existing servers (add ram, upgrade processors) and go for VMWare ESXI. Rent a server at a datacenter + rent virtual server in case real server goes down. Also rent some space at data storage to keep SQL files there. Have anyone considered these things and maybe found some good pros/cons list? ;) Thanks

  Read the article

• How can I decrease the time spent reformatting / restoring user's workstations?

  - by CT

  I just working for a medium sized company (approx. 150 users). When user's workstations need to be reformatted for any variety of reasons, we reformat, reinstall windows from an oem disk, install drivers, install shop desired software, and restore user's documents from latest backup. While the process isn't very difficult it is very time consuming. What are some options simplify / speed up this process? Mostly a complete Windows shop with most servers running Win2k3 Enterprise and workstations running a variety of XP, Vista, and 7. Workstations are purchased through a variety of OEMs mostly Dell.

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• Linux IO scheduler on databases with RAID

  - by Raghu

  Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

  Read the article

• Samsung TV connected to PC for Powerpoint

  - by Skaughty

  I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Overheating on Ubuntu 12.04

  - by mati

  I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

  Read the article

• Is a computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• How to create Restoration Partion?

  - by Fellknight

  For some time now, when buying new computers (laptops in particular) from big name brands-like DELL, HP, TOSHIBA, etc.-most of them come with a "rescue" or "restore" partion instead of installation CD/DVD. Said partitions have everything needed to rebuild the factory installed OS, unfortunately they also include all crapware that the OEM installed on the machine. Is it there a way to custom create such a partition with out all the useless software included?. They seem quite appealing considering they only use about 10GB-20GB of space and offer the pretty much the same functionality as a complete system image/backup.

  Read the article

• X server not starting up after new kernel compilation

  - by tech_learner

  I have compiled the Kernel on my 64-bit Debian XPS Studio 1340 Dell system. srikanth@debian:~ - 05:40:52 PM - $ uname -a Linux debian 2.6.32-5-amd64 #1 SMP Thu Mar 22 17:26:33 UTC 2012 x86_64 GNU/Linux Kernel version that I have used and compiled from kernel.org is 2.6.35.13 I have nvidia installed on old kernel. I got the old config and I used the same config to compile the new kernel. Everything went well and I got two debian packages ( image and headers ) which I have installed on my system. When I select the new kernel on the boot menu and I go into it, the X server is not starting up possibly because I have to "rebuild" ( not sure how to do that ) according to this link: http://www.linuxquestions.org/questions/slackware-14/x-server-not-starting-after-kernel-compilation-605265/ Can you suggest how to do the rebuild on nvidia module so that I can start x ( without seeing any blank screen or error saying nvidia module is missing ) ? PS: The link that I have used to compile the kernel is https://help.ubuntu.com/community/Kernel/Compile#Alternate_Build_Method:_The_Old-Fashioned_Debian_Way

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >