Search Results

Search found 63571 results on 2543 pages for 'windows desktop gadgets'.

Page 81/2543 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Remote Desktop Connection over VPN on mac

    - by Diego Faria
    I'm trying to connect to a Windows computer on over a VPN connection using Remote Desktop connection. I opened Network on mac and created a new connection. Interface: VPN. VPN Type: PPTP. I filled the inputs for server address, account name, password and applied. I connect the VPN and it connects. I open Remote Desktop Connection and put the IP of the machina i want to connect but it dont connect, a problem occurs saying that the machina may be turned off and etc. But in a windows machine I can connect there and the machine is up and running. On my mac I ping to the ip address that a want to connect and it has no response. I think that the vpn have a problem, is there a way for me to certificate that i am on the vpn network ? Whats going on?

    Read the article

  • How to increase Remote Desktop resolution?

    - by BugAlert
    I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

    Read the article

  • Prevent Windows 7 from unpluging External HDD

    - by marverix
    I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

    Read the article

  • Windows 7: Search indexing is stuck

    - by Ricket
    When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

    Read the article

  • Failure to copy files with ownership/ACL information on a Windows Server 2008 R2 machine

    - by darklion
    I'm attempting to copy a directory tree, maintaining its ownership information using the command: XCOPY S:\ProjectsDefault\Tempalte\admin S:\Projects\00\111\admin /S /E /I /O the command gives an Access denied error message, and while it does create the directory tree, the ownership and ACL information is not copied. This is being done on a Windows 2008 R2 Server which has mounted a share from a Windows 2003 R2 domain controller. The user has been been granted full access to the share and is a member of the Domain Admins security group. Oddly enough, the command does work if performed on a different (Windows 2003 R2 Server). (It also works if done using the Domain Administrator account on the 2008 server.)

    Read the article

  • Empty track in Windows Media Player 12 that can't be deleted

    - by David Brown
    Right after I installed a fresh copy of Windows 7, I synced with my DropBox account that contains all of my music and added the directory to Windows Media Player 12. I now have a strange track that really isn't a track at all. It's grouped under "Unknown Artist" and has absolutely no text. The only reason I know it's there is because it highlights on mouse-over. Double-clicking on it does nothing. When the song before it ends, Windows Media Player stops playing altogether until I choose a different song (it should continue to play the next song on its own). When I try to delete this mysterious track, nothing happens. I've cleared my library and re-imported everything, but this empty track keeps appearing. I have also checked my Music directory and there is no empty MP3. What is going on here?

    Read the article

  • Windows 7 wake from sleep and UTC?

    - by Joshua Elliott
    I've been having problems with windows 7 waking from sleep after one minute or so on my laptop. I also have ArchLinux installed on this computer. A while back I tried a registry tweak to get windows to use UTC so it would play nice with Linux. The registry tweak didn't seem to work and my windows clock was always wrong. Today I deleted the registry entry that I added, and the problem with sleeping seemed to go away. Can anyone make sense of this? The registry entry I added was: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] "RealTimeIsUniversal"=dword:00000001

    Read the article

  • Windows VPN - NO internet access

    - by sharru
    I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

    Read the article

  • Windows 8 to 8.1 Pro Upgrade SecureBoot Error

    - by Alexandru
    I upgraded from Windows 8 to Windows 8.1. I have an Alienware Aurora R4 with the latest BIOS firmware version, A09. Ever since I did the upgrade, I get a watermark on my desktop saying, "SecureBoot isn't configured correctly"...I would like to get rid of this watermark the correct way (not by hacking system DLLs). My BIOS shows me booting in UEFI mode, and I see that SecureBoot is actually disabled from there. I cannot enable SecureBoot, in either UEFI mode or Legacy Boot mode. Note, I can't even get Legacy Boot mode working without re-formatting my system which I really don't plan on doing, so my question is this...what has changed in the way Windows handles SecureBoot? As far as I can tell, I do not have SecureBoot enabled, and it is trying to tell me that it isn't configured correctly. Why does it even care to check if my BIOS doesn't have it on anyways?! Its so frustrating!

    Read the article

  • How to charge an iPhone on a Windows PC without Installing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

    - by Barton Chittenden
    I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

    Read the article

  • Windows 8 account and MSN

    - by win8user
    I've installed windows 8 and during setup it wanted my email. I provided an alternative email (let's call it email_1) for the installation to complete. Then I've installed windows live (msn only), for which I use another email (email_2). Now, every time I start windows and open msn, I'm signed in with email_1. I selected "forget me" for email_1 address in the msn login window, but I'm somehow always signed in with email_1. Is there any way to completely remove email_1 from the msn?

    Read the article

  • Add multi monitor option to remote desktop web access

    - by Eds
    I have a test environment for a remote desktop farm with a connection broker load balancing logins across remote desktop session host servers. All servers are built on Server 2012 R2. Using rd web access, we can access this farm from anywhere. When logging in via web access, you can choose the screen resolution or use full screen. If you have two monitors when selecting full screen, it will always use both your monitors. Does anyone know how to adjust the RDWeb page so that you can choose whether or not to use both your monitors? This option is in the GUI from RDP 6.1 onwards, so I would imagine there is a way to also add it the web access page.

    Read the article

  • Can Windows XP remember file icon position?

    - by g .
    Windows allows you to arrange icons however you like in a window. However after some time when I go back to the window, it has forgotten the icon positions and has completely rearranged the icons. Is there a way to preserve the icon positions? In the previous version of Windows I used, this would happen on rare occasions (about 6 months) and it might only move a couple of icons. Now it is happening practically every day and it is every single icon. Attempts to rearrange them manually are futile and it is increasingly maddening. Searching Google, I have found a number of programs that allow you to save and restore icon position on the desktop. But, this is just a regular folder window so I am not sure if any of those would even work. Some details: Windows XP SP 3 running in Parallels 5 virtual machine Auto Arrange and Align to Grid are NOT turned on Fresh OS install and only setting icon positions in one window

    Read the article

  • Windows vista firewall exceptions unchangeable

    - by user61099
    Hey, I want to allow a program (iTunes) through my windows firewall, so i check it in the program or port list under the exceptions tab (in my windows firewall settings), then i click OK. When i reopen the window the box is unchecked again. Which means i can never get the program through my windows firewall. I think this is a problem due to administrators rights. Because I also can not delete the program from the list. I can however delete other programs from the list. Anybody have any ideas, tips, remarks?

    Read the article

  • Windows Vista - Can't start any program without choosing "Run as administrator"

    - by Dave Forgac
    A friend called me saying that her computer recently said it was applying a Windows update when it was shutting down. Now when logged in as her normal user whenever she tries to run any program from the start menu or from a shortcut on the desktop she gets the following popup: "Windows cannot access the specified device path or file You may not have the appropriate permissions to access the item" If she right-clicks and chooses 'Run as administrator' the program will run. We checked the Windows update history and it said the update was applied successfully and that there are no updates available. Unfortunately I'm in a different city so I don't have physical access to the system to look at it any further. Has anyone had a similar problem or have any suggestions?

    Read the article

  • Windows 7 blocks network access to network-installed apps

    - by VokinLoksar
    Windows 2008 R2 domain. Users, running Windows 7 Enterprise, are trying to run some software from a network share. Specifically, I've tested this with MATLAB and PuTTY. When starting, MATLAB has to contact a licensing server to get its license. This action fails for regular users when they start MATLAB from the network share. However, if they copy the installation directory to a local disk everything works fine. Running MATLAB as an admin user from the network share also works. Same story with PuTTY. If the executable is launched from the share, regular users cannot connect to any servers. Something is blocking network communications for programs that are launched from a network drive. Here's the only other mention I could find of the same problem: https://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/4504b192-0bc0-4402-8e00-a936ea7e6dff It's not the Windows firewall or the IE security settings. Does anyone have any clue as to what this is?

    Read the article

  • Remote desktop to my KVM virtual machine

    - by user6
    I've got a dedicated server running Debian 6. I've set up a windows 7 virtual machine using KVM. Now I'm trying to get Remote desktop working. I'm guessing i have to do some port forwarding. The virtual machine is in a NAT. Remote desktop is already set up on it (another virtual machine can connect). I've tried using the iptables and countless of virsh commands of which I'm not even sure what they did. Anyone knows how to get this working?

    Read the article

  • difference between server and desktop

    - by user1241438
    I want to set up a webserver. I would like to buy a hardware for that and i am trying to understand if i should buy a desktop and host the webserver on that or do i have to buy some used server from ebay and host on it. Example is http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180986172861&ssPageName=ADME:X:RTQ:US:1123 But what is the difference in desktop and server? These days even desktops are coming with high RAM. Only other difference i see is servers have RAID HARD disk. Is there any other difference?

    Read the article

  • Connecting to Windows 7 from fedora is slow

    - by user44212
    I use rdesktop command to connect to windows 7 machine remotely but I get a very slow reponse when I try and connent to it. The command that I used to connect to it is rdesktop -4 -C -x -b : -g 100% 192.168.1.100. I have tried using the rdesktop command to connect to the console port as well but the result is the same. I have even tried using the Terminal server client application the result is the same. I am trying to connect from fedora 14 machine to windows 7 professional is there any tweaking that needs to be done to overcome this issue either on fedora or Windows 7.

    Read the article

  • Leave Windows Session Logged On

    - by Kyle Brandt
    Is a bad idea for any reason to leave accounts logged onto Windows remote desktop sessions? So instead of logging off, just closing the session so it locks. In this case, the limited number of remote desktop connections is not an issue. I am just wondering if anyone has seen sessions leak memory over time or maybe security issues with doing this, etc... I could see if programs were left open they might suck up and or leak memory, but has anyone seen this with Microsoft software such as Control Panels, Management Consoles, and Exchange System Administrator?

    Read the article

  • What is "queued Windows Error Reporting"?

    - by Rewinder
    I was cleaning up my laptop hard-disk, running Windows 7, and as part of the process I ran the Disk Cleanup utility. To my surprise I saw 2 items in the list that were quite large (both ~300MB). Per user queued Windows Error Reporting System queued Windows Error Reporting I guess I had never noticed these, because they were never that big. So, what are these items? Any particular reason why they became so large all of a sudden? And finally, is it safe to remove them?

    Read the article

  • windows phone 8 on remote hyper-v server

    - by Davy
    I downloaded the new SDK and installed on my Windows 8 instance on my dedicated Hyper-V Server. When I start the emulator I receive an error. And after some searching and reading I realised that hyper-v is not supported. Is there any possibilities that I can run my Windows phone 8 emulator on a remote Hyper-V 2012 server? What I can see, it only uses the built-in hyper-v server in windows 8 as default. Can i change it somewhere? /Davy

    Read the article

  • Windows 7 Locking Executable Files

    - by James Burgess
    Since I've been using Windows 7 RTM (as opposed to the Beta and RCs), I've been having a peculiar issue with executable files. I first noticed it whilst using Visual Studio, in that when building a project, it would often fail saying that the output file was locked - but the problem has stemmed further. When I've executed an application, closed it (cleanly), and attempted to delete/move/rename/overwrite said file, Windows 7 tells me that the file is locked/access is denied. I've made use of software like LockHunter/Unlocker but it is seemingly unable to remove these locks (most of the time, it shows no locks at all). After about 5-10 minutes, the respective files are unlocked again, but needless to say this is a bit of a workflow-breaker (as it's not simply constrained to VS). I've done the usual tasks of virus/malware scanning, and turned up with absolutely nothing. I've got no peculiar services running, and the problem was not present before I installed a Windows 7 RTM version. Any help is greatly appreciated.

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >