Search Results

Search found 32598 results on 1304 pages for 'ubuntu touch'.

Page 810/1304 | < Previous Page | 806 807 808 809 810 811 812 813 814 815 816 817  | Next Page >

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• Youtube video streaming slow

  - by Newbie

  When I try to stream youtube videos on my ubuntu 11.04, they don't stream smoothly. They buffer well and are choppy. Here's my Config: Laptop: Gateway NV58 Ram : 4 GB Ethernet Controller: Broadcom Corp NetLink BCM5784M Gigabit Ethernet PCIe (rev10) Let me know if you need more details. Output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 04:00.0 Network controller: Intel Corporation WiFi Link 5100

  Read the article

• login takes long time

  - by Arkaprovo Bhattacharjee

  I am using Ubuntu 12.04 from past 12 days. In the beginning login was fast enough after I put the password it hardly takes 3 to 4 sec to enter in desktop, but now its taking like more that 40 sec to show desktop after entering password. whats the problem, is there any solution? P.S there is only two programs (psensor and jupiter) that starts automatically after login. boot.log fsck from util-linux 2.20.1 /dev/sda6: clean, 254544/3325952 files, 2133831/13285632 blocks * Stopping Userspace bootsplash[164G[ OK ] * Stopping Flush boot log to disk[164G[ OK ] * Starting mDNS/DNS-SD daemon[164G[ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox * Starting bluetooth daemon[164G[ OK ] * Starting network connection manager[164G[ OK ] * Starting AppArmor profiles [170G [164G[ OK ] * Stopping System V initialisation compatibility[164G[ OK ] * Starting CUPS printing spooler/server[164G[ OK ] * Starting System V runlevel compatibility[164G[ OK ] * Starting Bumblebee supporting nVidia Optimus cards[164G[ OK ] * Starting LightDM Display Manager[164G[ OK ] * Starting save kernel messages[164G[ OK ] * Starting anac(h)ronistic cron[164G[ OK ] * Starting ACPI daemon[164G[ OK ] * Starting regular background program processing daemon[164G[ OK ] * Starting deferred execution scheduler[164G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Starting CPU interrupts balancing daemon[164G[ OK ]

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• RAM caching causes severe performance drops

  - by B T

  I have read plenty of threads on memory caching and the standard response of "large cache is good, it shouldn't effect performance", "the kernel knows best". I have recently upgraded from 12.04 to 12.10 and changed from VirtualBox to VMware Workstation and the performance differences are severe (I suspect it is because of the latter). When I am running my virtual machine the system load monitor graph shows less than 50% memory usage generally. System load indicator is showing me that the rest of my RAM is used in the cache all the time. Plain and simple this is the comparison: BEFORE Cache was very sparingly used, pretty much none of my memory usage was the cache Swappiness was 0 (caused my memory to be used first, then swap only if needed) Performance was quite good and logical RAM was used fully first, caching was minimal. I could run enough software to utilize my full 4GB of RAM without any performance degradation whatsoever Swap space was then used as needed which was obviously slower (I am on a HDD) but was still usable when the current program was loaded into memory AFTER Cache is used to fill the full 4GB as soon as my virtual machine is run Swappiness is 0 (same behaviour as before but cache uses full memory straight away) Performance is terrible and unusable while running Ubuntu software Basic things like changing windows takes 2 minutes + Changing screens happens frame by frame over sometimes up to 5 minutes Cannot run an IDE and VM like I could with ease before So basically, any suggestions on how to take my performance back to how it was before while keeping my current setup? My suspicion is VMWare is the problem, but how do I see what is tied to the use of the cache? Surely there is a way to control this behaviour in software as polished as VMware? Thanks EDIT: Could also be important to note that the behaviour differs depending on whether VMware is open or closed. If VMware is open, then the ram will lock at like 50% and 50% cache and go into the complete lock up mentioned above. Contrastingly, if VMware is closed (after being open), then the RAM will continue to rise as it needs / cache will stay as the complete remaining memory and there is no noticeable performance degradation.

  Read the article

• Rosegarden plugin list is empty

  - by Wes

  I've just installed rosegarden through apt. I've also installed jack and a low latency kernel through a PPA https://launchpad.net/~abogani/+archive/ppa. I've started jack-server and through the control panel I can see its wiring things through rosegarden. I've also tried installing qsynth and dssi both through apt. However I can't see any plug ins in the synth plug-in list. Therefore I'm unable to test if this works. I've tried launching qsynth before rosegarden and I've tried a few things however I just can't see any plugins. Does anyone know how to get this to work? I'm using ubuntu 11.04 or 11.10 I think. sudo apt-get install rosegarden -o APT::Install-Suggests=true synaptic sudo apt-get install synaptic synaptic sudo synaptic synaptic sudo apt-add-repository ppa:abogani/ppa sudo apt-get install linux-lowlatency sudo apt-get install dssi sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui alsa-firmware sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui sudo apt-get install blop caps cmt fil-plugins rev-plugins swh-plugins tap-plugins sudo apt-get install blepvco mcp-plugins omins

  Read the article

• How can I upgrade my server's kernel without rebooting?

  - by Oli

  This is a loaded question because I'm already aware of, and am very interested in ksplice. The problem is that since they were bought by Oracle, they have been forced to pull numerous server distributions from the offerings. The answer isn't as simple as it once was. I noticed a question on Unix.SE that states: You can build your own ksplice patches to dynamically load into your own kernel Great! But how?! I've installed the free ksplice package in the repo on my desktop (not ksplice-uptrack which is non-free) and now want to generate and apply updates. What's the process? Are there any scripts out there to automate the process? Moreover, if all the machinery required for rebootless upgrades is sitting there in the kernel (and ksplice package), why on earth aren't we taking advantage of it by default? Note 1: I am happy for a solution beside ksplice but it has to deliver the same thing: rolling updates to the kernel that can be applied without rebooting the server. Note 2: I'll say it again; the main ksplice "service" does not support Ubuntu Server. It used to but it doesn't any more. When I talk about wanting to use ksplice, I'm talking about the open source tools in the ksplice package. Any answer that talks about ksplice-uptrack is probably not what I'm after as this is the part that integrates directly with aforementioned "service".

  Read the article

• Unable to record sound from web browser (firefox / chromium ) using recordmydesktop

  - by thamurath

  I have to do some screencast tutorials and i am using recordmydesktop with gtk frontend to do it. I need to record also the sound and here is where i have found the problem. It took me some time, but now I can record the sound from almost every application in my desktop ... almost. I need to capture some sound from a web application using java, but when i load the page nothing appears in the playback tab of pavucontrol. I think this is the problem, because if there is no sound stream i think the recordmydesktop program thinks there is no sound to record ... the funny thing is that I can ear the sound in my speakers! I have tried with Firefox and Chromium with no success. Although I have been able to record youtube videos without problem, so it seems that java is the key here. Any suggestion or idea? P.S.: I am using Ubuntu 11.10 with this configuration. ( if more information is needed please let me know) sight i cannot post images ... so I have an audigy2 sound card using Analog Stereo Output profile. I have also an "Internal Audio" device, but i have it with the "Off" profile. In recordmydesktop-Advanced-Sound: Device = default

  Read the article

• Why are my 32bit OpenGL libraries pointing to mesa instead of nvidia, and how do I fix it?

  - by Codemonkey

  I have installed Nvidia's drivers on my Ubuntu 13 system, but according to this command (ldconfig -p | grep GL): $ ldconfig -p | grep GL libQtOpenGL.so.4 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libQtOpenGL.so.4 libGLU.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLU.so.1 libGLEWmx.so.1.8 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLEWmx.so.1.8 libGLEW.so.1.8 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLEW.so.1.8 libGLESv2.so.2 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/mesa-egl/libGLESv2.so.2 libGL.so.1 (libc6,x86-64) => /usr/lib/libGL.so.1 libGL.so.1 (libc6) => /usr/lib/i386-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64) => /usr/lib/libGL.so libEGL.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/mesa-egl/libEGL.so.1 The 32bit version of OpenGL is pointing to mesa's libraries instead of nvidia. This causes my Steam games to refuse to launch with the error: Could not find required OpenGL entry point 'glGetError'! Either your video card is unsupported, or your OpenGL driver needs to be updated. Why is this the case? When the nvidia installer asked me if I wanted to install "32bit compatability libraries" (or something like that) I chose yes. How do I fix this? Edit: I just reinstalled the same Nvidia driver, and that apparently removed the 32bit OpenGL driver completely: $ ldconfig -p | grep libGL.so libGL.so.1 (libc6,x86-64) => /usr/lib/libGL.so.1 libGL.so (libc6,x86-64) => /usr/lib/libGL.so Now Steam won't start: You are missing the following 32-bit libraries, and Steam may not run: libGL.so.1 Again, I chose YES when the installer asked me if I wanted to install 32bit libraries. Why are they not installed!?

  Read the article

• Exempt programs from using active VPN connection

  - by Oxwivi

  When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

  Read the article

• how to install 13.04 on a partitioned hardrive

  - by Denny

  First, not a computer literate person, not even a novice- so please use small words. I recently made the switch to ubuntu, it came preloaded on my new laptop that I order from a big tech dot com site. The version on it is 12.04 (i think) and 64bit. This system has a lot that I like but it is quirky for me to say the least. Apparently I have held broken packages and have no way of knowing how to find them. I discovered this when trying to download (from software center) VLC so that I could watch some movies I had on an external hard-drive. Unmet dependencies error and held broken package errors abound while trying to fix the problem. Ive scoured this site and other and followed almost all the suggestions to a T but still I am unable to fix anything. My computer is partitioned (but I don't even know how to get to the otherside so to speak). I would like to know; can I put the newer 13.04 OS on one side of the partition and then delete the older version on the other side? or, can I install 13.04 over the existing 12.04? What would I need to do this? An obstacle that I have is this, I am currently serving in Afghanistan so going someplace to buy something or running down to a computer store for service support is out of the question. I very much appreciate your help, cause right now this computer is nothing more than a word processor, which would be fine if all i wanted was a word processor. Thanks in advance.

  Read the article

• How do I get OBDII software working?

  - by NoBugs

  I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

  Read the article

• Mounting an encrypted partion Error

  - by indiajoe

  Using the disk utilities in ubuntu 11.04, i had encrypted a partition with a passphrase. Each time i used to click on the partition to mount, it used to ask me the passphrase and get mounted. All was fine, until i installed the 12.04. After the installation, this encrypted partition, disappeared from the menu. fdisk -l /dev/sda Shows the encrypted partition in the list /dev/sda7 298953648 488392064 94719208+ 7 HPFS/NTFS/exFAT I tried the following commands to mount it. But they all gave following errors $ sudo cryptsetup luksDump /dev/sda7 Device /dev/sda7 is not a valid LUKS device. $ ecryptfs-unwrap-passphrase /dev/sda7 Passphrase: # i entered the correct passphrase here... Error: Unwrapping passphrase failed [-5] Info: Check the system log for more information from libecryptfs $ grep ecryptfs /var/log/syslog Oct 31 22:43:51 benny ecryptfs-unwrap-passphrase: Error attempting to open [/dev/sda7] for reading Nov 1 01:28:02 benny ecryptfs-unwrap-passphrase: Error attempting to open [/dev/sda7] for reading Nov 1 01:29:06 benny ecryptfs-unwrap-passphrase: Error attempting to open [/dev/sda7] for reading I don't understand why I am getting the "Device /dev/sda7 is not a valid LUKS device." Could it be due to some corruption in partition table? Is there any way to recover this encrypted partition? Thanks indiajoe

  Read the article

• LiveCD Boot/Install

  - by Jon

  I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

  Read the article

• Software Center not Opening at all Error

  - by Newbie

  When I open software from menu, it says "cannot open software database. Please reinstall the software-center package. When I write software-center on terminal, such error comes: 2014-05-28 09:11:20,584 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2014-05-28 09:11:20,593 - softwarecenter.ui.gtk3.app - ERROR - xapian open failed Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 302, in __init__ if self.db.schema_version() != DB_SCHEMA_VERSION: File "/usr/share/software-center/softwarecenter/db/database.py", line 289, in schema_version return self.xapiandb.get_metadata("db-schema-version") File "/usr/share/software-center/softwarecenter/db/database.py", line 177, in xapiandb self._db_per_thread[thread_name] = self._get_new_xapiandb() File "/usr/share/software-center/softwarecenter/db/database.py", line 190, in _get_new_xapiandb xapiandb = xapian.Database(self._db_pathname) File "/usr/lib/python2.7/dist-packages/xapian/__init__.py", line 3667, in __init__ _xapian.Database_swiginit(self,_xapian.new_Database(*args)) DatabaseCorruptError: /var/cache/software-center/xapian/iamchert: Chert version file should be 28 bytes, actually 0 Now, when I write command sudo apt-get remove software-center dpkg: error: corrupt info database format file '/var/lib/dpkg/info/format' E: Sub-process /usr/bin/dpkg returned an error code (2) I had ubuntu before but it kind of got corrupted. Now, I have freshly reinstalled it and even at start, software center is not opening and this error comes. I hope you have a solution. Thanks.

  Read the article

• How to change circular icon to indicate chosen session in unity-greeter?

  - by Chan-Ho Suh

  In Precise (12.04), when I login to lightdm, using the unity-greeter, there's a white circle by my name. For the standard DEs like Unity or XFCE, the circle has a representative icon (Ubuntu symbol or little mouse resp.). I have a session for Awesome window manager which was added when I installed Awesome, but it just shows a blank white circle. I'd like to know how to add an icon to it, or at least some indicator, as unity-greeter doesn't show you what session is set until you click on the circle. I found another question about changing the session names. The answer for it said to change the names in the desktop files in /usr/share/xsessions. Unfortunately, while there is an icon field in those desktop files, they are all blank (Caveat: I no longer have Unity installed, so maybe the Unity one would not be blank. But the Xubuntu desktop file has it blank even though the icon shows in unity-greeter). Update: Here's the png I use as a badge for Awesome. It's not great, but looks reasonably nice: []

  Read the article

• How do I restore the original color scheme, icons, and theme?

  - by katya sehgal

  I'd like the original colour scheme, icon style of 12.04. I somehow lost the Ambiance theme (possible error or upgrade error). I re-installed 'light-themes' from the terminal and got it back. But the panel on the top that shows the options of sound, battery and wi-fi has changed and I can-not get the original setting back. In the windows, the close, minimize tools have shifted to the right instead of the original left side. I had installed MyUnity and Ubuntu Tweak but deleted them. As such, I want the original setting back. Kindly help me with the commands. I have searched for solutions; there are multiple and I need to be sure if I should follow the same. Kindly bear before marking duplicate. Discoveries: The appearance is gray and boxy as outlined here. Not sure same problem. Similar 'gray and boxy' article here. Desktop forgets theme. I have also tried the unity --reset command. It never completes. I gave it 20 minutes.

  Read the article

• Free Software for Billing (Columbia)

  - by Yoimir Yamit Castrillon Duque

  English I'm looking for a billing application (also inventories, shopping, clients, providers, accounts, etc) for small businesses. The software should adapt with Colombia's necessities. I searched for it in Google, and I found several ERP such as OpenBravo and Adempiere, but these applications are very big and difficult to use, in fact, I couldn't make them work. I found an application called Ubifactura (made specifically for Colombia), I downloaded the Java source code, but I don't have any idea about how to compile it. I need someone to help me to compile it or just some recommendations for similar software. The idea is to help small business from my town with one of these applications (it doesn't matter if it is for Windows or Linux), the idea is to help. All help is welcome. Spanish (Español) Estoy buscando una aplicacion de facturacion (tambien inventario, compras, clientes, proveedores, cuentas, etc) para pequeñas empresas, que se adaptade a las necesidades de Colombia, en google encontre varios ERP como openbravo y adempiere, pero aplicaciones muy grandes y dificiles de manejas, de hecho no puede hacerlas funcionar. Encontre un programa llamado Ubifactura, hecho para facturar en Colomabia, descarge los archivos de codigo fuente en java, pero no tengo ni idea de como ponerlo a funcionar, pues habla de eclipce, de un servsdor CVS, que no tengo ni idea de como poner a funcionar, necesito si alguien me puede ayudar a trabajar con estos archivos java, o me suguieran aplicacion de acuerdo a mis necesidades. La idea es bebeficiar a varias pequeñas empresas de mi pueblo con una aplicacion de estas, ni importa si en entorno windows o ubuntu, la idea es aportarles algo desde el software libre. Saludos y a la espera de respuestas. Toda ayuda es bienvenida.

  Read the article

• Problem with SANE and CardScan

  - by TiuTalk

  I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

  Read the article

• DVDs and CDs not recognized

  - by Larry Doyle

  I have Ubuntu 12.04 LTS installed on my computer (Sony Vaio VGN-NS205N). It reads some CDs and DVDs just fine, but many others it will not recognize at all, or will only recognize after opening and closing the CD tray many times. It just shows the cd/dvd drive as being empty and won't show that anything is on there at all. I have a few DVDs (from the same publisher) that work every time. This comes up most often when trying to show my kid Bob the Builder, etc. Some data CDs I would like to work with also have the same issue. It's not a hardware or defective disc problem, since all these will play in Windows on the same machine. It's just really annoying to have to switch operating systems to play videos or get data off discs. All the searches I have done people recommend installing medibuntu and other repositories. I have and they are all up to date. No change. Any help that works would be greatly appreciated.

  Read the article

• Mapping XFCE4/xRDP sessions to users

  - by garrilla

  I have Ubuntu 13.10 with Xubuntu Desktop - XFCE4. I'm trying to use XDRP to allow MS Windows users to login to the machine with their own user. I've been a lot around the houses with this! I've find two half-way solutions, but can't get them to work as I'd like... 1) in /etc/xrdp/xrdp.ini I set the port to -1 [xrdp1] name=sesman-Xvnc lib=libvnc.so username=ask password=ask ip=127.0.0.1 port=-1 each time any user logs on they get a new session - they can never go back to their original session 2) in /etc/xrdp/xrdp.ini I set the port to 5912 (e.g) [xrdp1] name=sesman-Xvnc lib=libvnc.so username=ask password=ask ip=127.0.0.1 port=5912 each time any user logs on they always log on to the same session irrespective of their logon details ??) I found a mid-way solution, to create a lot of sessions by adding adding additional options in the xrdp.ini e.g. [xrdp8] name=Bob's Logon lib=libvnc.so username=ask password=ask ip=127.0.0.1 port=5913 [xrdp9] name=Jill's Logon lib=libvnc.so username=ask password=ask ip=127.0.0.1 port=5914 and so on, but he problem with this is that Jill can still log into Bob's remote session ??? Is it possible to to do what I'm trying to do? Maybe I have to use different tools?

  Read the article

• Backup Failed, need help not failing

  - by Costa

  Backup (Deja Dup) failed to do an initial backup to my Amazon S3, and despite my best Googling efforts, I could not find a solution : ( Here's the error message: BackendException: Error uploading s3+http://deja-dup-auto-akiaiksyiqi3buaaz26a/My-Archive/duplicity-full.20130805T143807Z.vol1.difftar.gpg I'm running Ubuntu 12.04 LTS on a System76. The folder I'm trying to backup to in S3 is set to store as Amazon Glacier Storage. Any help would rock! Update: better debugging info: DUPLICITY: . Failed to create bucket (attempt #1) 'deja-dup-auto-axxxxxxxxxxxa' failed (reason: S3ResponseError: S3ResponseError: 403 Forbidden DUPLICITY: . <?xml version="1.0" encoding="UTF-8"?> DUPLICITY: . <Error><Code>SignatureDoesNotMatch</Code><Message>The request signature we calculated does not match the signature you provided. Check your key and signing method.</Message><StringToSignBytes>47 00 54 0a 0a 0a 4d 6f 6e 00 20 30 35 20 00 75 67 20 32 30 31 00 00 35 00 32 34 3a 31 32 20 47 4d 00 0a 2f 64 65 6a 61 2d 64 75 70 2d 61 75 74 6f 2d 61 6b 69 00 6b 73 79 69 71 69 33 62 75 61 00 7a 32 36 61 2f</StringToSignBytes><RequestId>8000000000003</RequestId><HostId>Uxxxxxxxxxxxxxxxxx/xxxxxxxxxxxxxxxxRF</HostId><SignatureProvided>yxxxxxxxxxxxxxxxxxxxxx</SignatureProvided><StringToSign>GET

  Read the article

• Update Manager won't open (error related to pythonverbose)

  - by Mateus Machado Luna

  I'm having an issue with update-manager. Last night, my computer restart suddenly during the update process. Now it won't open and it keep appearing on the notifier with a message warning that an error occurred. The error is the same that is displayed when I try to open it on the terminal: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/bin/update-manager", line 26, in <module> from __future__ import print_function EOFError: EOF read where not expected I've already seen some questions here, but most of them are related to problems with ppas and the source.list file. This seems to be a bug on update-manager itself. I've already tried to remove it and install again, but the problem persists. I also noted another bug: my source-center doesn't open too. The message for it is similar to the other one: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/lib/command-not-found", line 5, in <module> from __future__ import absolute_import, print_function EOFError: EOF read where not expected For now I'm using apt-get update && upgrade for updating and the Synaptic for the source management. But I really would like to fix this stuff. Anyone can help? I'm with Ubuntu 12.10, Gnome-remix, 64-bits.

  Read the article

• System boots in console + login loop

  - by Imagicien

  I messed up my system while trying to fix permission problems for setting up a LAMP local server. I tried this solution: How to avoid using sudo when working in /var/www? without success. Then I saw this solution: Permissions issue: how can Apache access files in my Home directory? I understood that I had to change the permissions of my root directory (among others), so I executed: sudo chmod 710 / I also changed the user group on / to www-data. I also did these operations on /home. I'm pretty sure one of those commands broke something, because it's the last commands I executed, and after that, my system showed strange/broken behavior: Firefox stopped showing pages Some icons got replaced by an red X icon (meaning "Icon not found" I guess) Applications refused to launch (no reaction) After rebooting: I got a strange graphical message talking about not being able to mount something, asking me if I wanted to wait, and talking about /tmp (I forgot the message since I was in shock) My system now boots in console, and when I login, it flashes unsignificant stuff* before re-asking me to login. My important data is on Ubuntu One. I'd prefer not having to reinstall from scratch. Is there a way to regain access to my system? Thanks a lot for your help. *Looks like a terminal header with the name of the OS and other info. Doesn't seem important.

  Read the article

• Screen problems on 11.10 using VGA compatible controller 2nd Generation Core Processor Family Integrated Graphics Controller

  - by MorrisseyJ

  I am having problems with my display. The problem manifests as lots of screen artefacts, which seem to be worse in Unity than in Gnome 3, are worse after i have used suspend and are intolerable if i set myself up on a dual monitor. Specific issues include: icons disappearing, lines occurring all over the screen, the backgrounds of certain windows going another colour and window borders disappearing or being filled with text from other parts of the screen. The most annoying problem is lines of text disappearing from a host of word processing programmes (libreoffice, gedit, bluefish etc), as i type. In most circumstances the screen problem can be temporarily fixed (so that i can see the screen clearly) by either scrolling the text off the screen and then scrolling it back onto the screen, or highlighting the offending area of the desktop, by clicking and dragging. Errors on parts of the screen that don't seem to redraw (window borders (off the universal menu) or the screen area outside of a LO document, in print layout view, for example) can't seem to be fixed in a session. I am running 11.10, 64 bit on my Thinkpad x121e Display information is: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:4000(size=64) There appear to be a few problems with the Intel graphics and Ubuntu but i am not sure if they are all the same. If anyone knows if this is a known bug it'd be great to know, otherwise i'll file a report. Should anyone know of a fix i would greatly appreciate hearing about it. Let me know if you need any more information. Thanks

  Read the article

< Previous Page | 806 807 808 809 810 811 812 813 814 815 816 817  | Next Page >