Search Results

Search found 58950 results on 2358 pages for 'windows azure workflow'.

Page 811/2358 | < Previous Page | 807 808 809 810 811 812 813 814 815 816 817 818  | Next Page >

• Recommended Win2k8 Server software to fix my RAID-0 issue

  - by Jason Kealey

  I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

  Read the article

• Need advise for choosing software\hardware for virtualization.

  - by Anatoly

  Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

  Read the article

• How to restore Active Desktop if Themes is locked via GPO?

  - by pepoluan

  My company forces Active Desktop upon everybody so that it can display a (monthly-rotated) corporate wallpaper.jpg. Problem is, some computers (including my laptop) somehow experienced some errors resulting in the dreaded "Active Desktop Recovery" screen to show up... and clicking the "Restore My Active Desktop" button always resulted in "Internet Explorer Script Error". Various workarounds I found in the Internet either does not work or requires me to change the theme first to something else... and the latter I can't do because the Desktop Settings screen is locked via GPO. As it happens, due to the nature of the programs I use, I'm granted Administrator-level access on my computer. The question is: How do I fix my situation? Note: I don't need to put on my own wallpaper, but watching the "Active Desktop Recovery" screen (with its BLANK WHITE!!1! OH MY EYES!1!!one!eleven!! background) gets tiresome. I'm quite happy with the corporate wallpaper. I just need to somehow 'recover' my Active Desktop. More information: OS: Windows XP Professional SP3 (yeah, company's too afraid to even experiment with Windows 7) Antivirus: Symantec Endpoint Protection If you need any additional information, feel free to ask.

  Read the article

• Why can't I debug my ASP project through a remote desktop connection?

  - by Anthony Benavente

  I just asked this question in Stack Overflow but I figured this stack exchange forum is a better fit. It's been about a month of trying to figure out this problem and we've still not found a solution. We have about seven virtual machines on a server running Windows XP Professional w/ SP 3 all with Visual Studio Interdev and IIS 5.1 installed. Running the programs all work fine, but we just can't debug through remote desktop. When we are logged into the server console (through VM Sphere) and log into one of the virtual machines through there, we are able to debug properly. We figured the issue lies with some kind of permissions for Remote Desktop Users. We've tried nearly every article on the internet (exaggerating of course) and are about to give up hope. One more thing, when we are logged into the virtual machine through the server console and then remote in, the user that was logged into the console is kicked off but debugging works! Does remoting in trick the computer into giving us the correct permissions? I'm really not sure how it works. I know that this technology predates human history, but we are in the process of migrating from ASP Classic to ASP.NET Specs: - Windows XP Professional W/ SP3 - IIS 5.1 - Visual Studio 6 Interdev EDIT: By "debug" I mean running the project with breakpoints. Interdev doesn't stop at breakpoints.

  Read the article

• Microsoft Mouse and Keyboard Center - Slow response for App-specific shortcuts

  - by Darrel Hoffman

  So a few months ago, I bought a new MS mouse, and was surprised that they'd discontinued Intellipoint in favor of this Microsoft Mouse and Keyboard Center. It seems to have the same functionality underneath all the bloat, but there's a very serious drawback - when I set up application-specific functions for the extra buttons on the mouse, they work, but sometimes with a very long delay, like up to a minute or more. For example, I often set up the left side button as an "Undo" in various programs for convenience. But sometimes, when I try to use that Undo button, nothing happens, so I'm forced to use the standard Ctrl-Z or whatever. But then, a minute or so later, it suddenly remembers that I hit that button a while back, and calls the Undo unexpectedly on something entirely different. It's infuriating. No modern computer function should be this slow. It's not the software or the computer itself, because doing an Undo via Ctrl-Z or the menu still works instantly. It's very definitely a side-effect of delayed response to the mouse button. Usually after it delays the first time, it'll work quickly after that, but if you haven't used a given shortcut in several minutes, it "forgets" again and you get another inexplicably long delay. Intellipoint never had this problem, but it's not supported any more, and not compatible with the newer mice. Has anyone else noticed slow-downs with MS M&K C and app-specific shortcuts? Any ideas how to get around this? I use these shortcuts extensively in my workflow and it's just entirely unacceptable to have such a long delay in what should be a pretty basic feature.

  Read the article

• unable to set xmx beyond 4gb on system having 8gb RAM

  - by Arun

  I need to set ANT_OPTS=-Xms1024m -Xmx6144m -XX:PermSize=1024m -XX:MaxPermSize=1024m JAVA_OPTS=-Xms1024m -Xmx6144m -XX:PermSize=1024m -XX:MaxPermSize=1024m I have a system with 8gb(recently upgraded from 4 gb) But once i set the ant opts to above said value I am not able to run any of my ant targets and I get the following error [ERROR] Argument error: -Xmx6144m [ERROR] Specified maximum heap size (6144 MB) is larger than the address space on this platform (4 GB). [WARN ] -XX:PermSize=1024m is not a valid VM option. Ignoring [WARN ] -XX:MaxPermSize=1024m is not a valid VM option. Ignoring Could not create the Java virtual machine. This indicates the Java that I have on my system java version "1.6.0_20" Java(TM) SE Runtime Environment (build 1.6.0_20-b02) Oracle JRockit(R) (build R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_64, compiled mode) and I am running a Windows 7 on Intel Core 2 duo 3Ghz processor and 8gb RAM Any pointers in solving this issue would be of great help. PS: I did google for the error and it was one of my 1st such occurence where I didnot get any links pointing to the specific solution. Maybe no one has encountered such a scenario

  Read the article

• Is there an application to log component temperatures to file?

  - by MrVimes

  I purchased a computer a month or two ago (core i7, 24gb ram, geforce gtx 590, windows 7 ultimate). Within the last week it began to bluescreen regularly. I tried lots of things (check hds, check memory, reinstall windows etc..) but it still bluescreened. At the time my temps were as follows... CPU - aprox 40/50c. GPU - arpox 60 idle, aprox 90 during heavy use. HDDs - aprox 55c after the PC had been on a while. I thought the 55c was ok, but I have since realized it was probably too high and may have been the direct cause of the bluescreening. I've installed a spare fan I had in the front of the PC blowing air in, (so there's airflow from front to back) Since then, obviously, all my temps are down. Especially the HDDs - three of them reach 30c and one has been up to 47c (it is some distance away from the airflow, in one of the 5.25inch drive bays) I haven't had the PC on for as long as it would normally take to bluescreen yet, but If it does I want to know what all the temps were right before the bluescreen. I have tried Everest but it only shows me realtime temps or gives me the ability to create one-off reports. I want something that can record all the temps to a file at 30 seconds intervals. If the computer bluescreens I can load it up again and check the last entry in the file. Side question: Am I right in thinking 55c was far too hot for a HDD? (It might have got higher than that before the bluescreens.. I don't know) Another side question: Is 47c too high? This is actually why I am asking the main question - I am concerned that this one drive that isn't getting the benefit of the extra fan may still cause the computer to bluescreen.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Is 2 GB of RAM better than 2.5 GB?

  - by pibboater

  My laptop has two slots for RAM, and currently has two 512 MB chips, for 1 GB. Windows XP is running terribly slow on it, so I want to upgrade the RAM. I could buy two 1 GB chips to replace both of the current 512 MB chips, to give me 2 GB of RAM. Or, the price is the same to buy one 2 GB chip, to replace just one of the 512 MB chips, and give me 2.5 GB total. The RAM it takes is PC2-4200 533MHz DDR2. What do you think would be better: buying two 1 GB chips so it can take advantage of dual-channel operation, or buying one 2 GB chip to end up with more total RAM but not dual-channel operation? Like I said, price is the same, so performance is the only consideration. I'm not doing anything especially intensive like video or photo editing -- just having multiple Office programs open, playing music, browsers, etc., but currently even opening the first application takes forever. If it matters, the laptop is a Toshiba Qosmio G25-AV513 running Windows XP Media Center SP3. Thanks! Kevin

  Read the article

• AutoHotKey temporarily rebind Winkey

  - by wes

  I've got a wireless keyboard that puts some media keys on top of the Function keys, so that by default F4 is actually lock (Rwin & l) and Fn+F4 is a real F4. So I'd like to basically switch those around. Here's what the key history shows: VK SC Type Up/Dn Elapsed Key ------------------------------------- 73 03E d 17.32 F4 ; Fn+F4 73 03E u 0.16 F4 5C 15C d 2.96 Right Windows ; F4 4C 026 d 0.00 L 5C 15C u 0.13 Right Windows 4C 026 u 0.00 L This doesn't do anything: SC15C & SC026::MsgBox,Pressed F4 But this prints that I hit F4 then goes to the login screen: Rwin & l::MsgBox,Pressed F4 So how can I stop it from switching to the login screen? Ideally I'd like F4 (which registers as Rwin & l) to just send F4, Fn+F4 to send Rwin & l, and also have them work with other keys (e.g., a manual !F4 should still close a window). Is this possible?

  Read the article

• Instructions to setup primary and only domain controller

  - by Robert Koritnik

  Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a hw network adapter to linksys and a virtual network adapter to DC DC machine has two network adapters: one to linksys (to be internet connected so it can be updated etc.) and one to host (my dev Win7 machine) Edit My development machine should access domain controller and logon using domain credentials. Development machine would access internet directly via Linksys router. My domain controller machine would only serve authentication (and if I'm able to configure it right) should also have Active Directory Federation Services in a workable condition. I hope this is a bit more clear now. At least a small bit.

  Read the article

• Computer slow after installing 32GB RAM

  - by John Gilmore

  I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

  Read the article

• VPN - local and remote networks IP collision

  - by Guido García

  I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

  Read the article

• Bad HD and robocopy

  - by acidzombie24

  After my HD gave me crc errors I wanted to copy one drive to another and picked up a new 1TB hd. I am using the command robocopy G: J: /MIR /COPYALL /ZB First it tried copying the file a few times (i didnt count, its not in my window anymore) and got an access denied error, error 5. Then it tried again and locked up. I tried copying that specific file (14mb) and windows says "cant read from source file or disk". I started robocopy again. Hopefully it will ignore it after a fail attempt or two but what options can i use to say if it doesnt work continue to the next file. It looked like that is what it was doing but for this last one it repeated more then 4times and locked up finally. I'm open to other copy solutions. I do prefer built in solutions. I am using windows 7 Also how might i do this without the /MIR option. Is /S /E good enough? flag reference here -edit- i see i can control retries with /R: but i am still open to alternative solutions.

  Read the article

• Uninstallation of WSUS form SBS 2008

  - by Logik

  I am not much experienced system admin, but i came across the client who was having SBS 2008. The server was running out of HDD space. So to recover some, I removed its WSUS role (twas not needed).this removed WSUS 3.0 SP1 & freed a lot of space. This SBS is: Domian controller, DNS, DHCP, File server. After i removed WSUS i disabled windows update service & i rebooted serer & checked from one of client if the shared folders are accessible. they were. Next day all of sudden i got call from them saying they can't login into their domain. I looked into server, the Active directory service was stopped. I never remember touching any service other than windows update. How come AD service stopped running all of sudden. Is removing WSUS have such impact? I am not aware of any such thing.

  Read the article

• Running batch file through a service.

  - by wallz

  I'm trying to schedule a batch file to run through a third party application, however the output file doesn't get created in the directory. If I run the .BAT file from the command line, it works and the file gets created. Also using the Windows Schedule will also succeed. Basically, the 3rd party software will schedule the .BAT file and it shows success within the 3rd party user interface. The difference between running from the command prompt and the software, is that the software will use its Windows service to launch the batch. The 3rd party software will show success since it was able to successfully call the .BAT file to run, however it has no control of the other EXE's that's being called within the script. I'm able to run a simple .BAT file in the 3rd party software, for example a copy command. The .BAT I'm having problems with calls a compiled EXE which launches Excel to create a file to a location. The .bat file calls something.exe, which then calls Excel.exe: C:\something.exe -o D:\filename.xlsm C:\filename.xlsm refresh_pivot Do you think it's a permissions issue? I used Process Monitor to verify any Access Denied errors but everything seems to be working according to the trace. It worked on a non-64-bit OS, I'm currently using Win2008 64-bit.

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• Is there any way to tweak / rotate mouse orientation? Any applications? Registry edits?

  - by calbar

  I've got a very frustrating issue with my new Logitech Marathon Mouse M705. It is absolutely perfect for what I need, with the exception that it tracks on an angle for some reason. What I mean is when you slide the cursor to the left, it trends upward - when you slide to the right, it trends down. Moving the cursor along a flat horizontal line is no longer a natural motion - you need to fight what I suspect is a mechanical error of some kind. Unfortunately, I've already exchanged this mouse once and tested both on different Windows 7 and Mac OS X machines - the problem continues to occur. Is there a software solution for me? I'm incredibly surprised there is no simple way to adjust the orientation... how can every mouse manufacturer possibly adjust their hardware to track to everyone's tastes? What about those who need to flip orientation a full 90 or 180 degrees? I only need to adjust mine a few degrees, but I'm sure that need has arisen as well. Anyway, I'm running the latest SetPoint drivers (6.00) on Windows 7 and there are no orientation options available. I've checked out uberOptions and the M705 isn't supported yet (with the last version update over 6 months ago). MAF Mouse instructions are a very strange series of mouse clicks to activate. This app also seems a little overkill and costs $$ (which I'm willing to pay as a last resort). Is there no universal registry value for mouse orientation? How about for SetPoint drivers specifically? I've done a simple search in regedit without any luck. An XML file somewhere? Anything?

  Read the article

• (Win7) Gets stuck with ~1% CPU. Especially with multithreading

  - by meow

  Windows 7 32 bit, up to date, Intel i7 860. (For some reason the company runs 32bit Windows everywhere.) I tried to update all motherboard drivers etc. as far as possible. I have a performance issue with a machine which appears in connection with multithreading (or so I think). As an example (and where I most often see it, but it appears on other programs as well): ProteoWizard is a file conversion tool for mass spectrometry files. I can add a list of files and it will attempt to process up to 8 files in parallel (quadcore x 2 threads/core). If I choose 1 to 6 files, I start the process and it goes straight through. If I have =7 files in the queue, conversion goes to ~20%, then gets stuck for 15 seconds, then continues again, always in "chunks" of a few % before getting stuck again. During the time the process is stuck, CPU is at 1%. RAM is not limiting, it is maybe at 70% or so and not going up. I don't get the same problem on other, even slower machines. The computer gets also stuck at 1% CPU doing nothing on other occasions, but for multithreading it is most frequent. Where should I look for the problem?

  Read the article

• Restoring a fresh home folder in a shared user domain environment

  - by Cocoabean

  I am using a tool called pGINA that adds another credential provider to my Windows 7 clients so we can authenticate campus users via campus LDAP. We have the default Windows credential providers setup to authenticate off of our Active Directory, but we have students in our classes that don't have entries in our AD, and we need to know who they are to allow them internet access. Once these LDAP users login using pGINA, they are all redirected to the same AD account, a 'kiosk' account with GPOs in place to prevent anything malicious. My concern is that my users will accidentally save personal login information or files in that shared profile, and another user may login later and have access to a previous user's Gmail account, as the AppData folder on each computer is shared by anyone logging into the kiosk user. I've looked into MS's 'roll-your-own' SteadyState but it didn't seem to have what I wanted. I tried to write a PS script to copy a pre-saved clean version of the profile from a network share, but I just kept running into issues with CredSSP delegation and accessing the share from the UNC path. Others have recommended something like DeepFreeze but I'd like to do it without 3rd party tools if possible.

  Read the article

• Obtaining clear cable signal with Hauppage 1191-950Q TV Tuner

  - by Kyle B.

  I bought a Hauppauge 1191 WinTV-HVR-950Q TV Tuner a while back, and I am attempting to use it to watch TV in Windows Media Center. I do not have cable TV, however I used to have Comcast. Through experimentation, I found that connecting my coax cable into my TV, I was able to view television (i.e. 2-1 = CBS, 5-1 = NBC, etc). This also works on a second TV I use in another room. When I connect the coax cable to my TV Tuner stick and scan TV channels in Windows Media Center, it only picks up 1 station (like 81 or something). My only conclusion on this is somehow the hardware in the television is decrypting a signal that the TV tuner stick is not able to. Is that possible? Should I try a different TV tuner? Any assistance would be appreciated. I also bought a Terk HD Indoor Antenna but my reception has been flakey, so I would rather go this route if possible.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Mapped network drive missing from My Computer and Explorer

  - by matt wilkie

  On a Windows XP Pro SP3 machine one network drive refuses to show up in My Computer or Explorer. The missing drive letter is G:, if that matters. Other mappings work fine. Other profiles one the same machine have no problem mapping G:. I can access the G: just fine typing it into the address bar or in CMD shell. I've used TweakUI to toggle hide/show G: with no difference. TweakUI says G: should be visible. I've logged off,on between toggles to make sure the settings are taking effect. I've looked at reg key [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] and made sure it's zero'd. [insert ref link here] We've limped along with this broken setup for some time, just working around it, but some applications do not allow typing in a path when choosing a place to save files and it's reached the point where it's intolerable. So, anyone have any idea why XP won't show this drive letter? or how to fix it?

  Read the article

• STOP 0x7b booting from iSCSI

  - by Michael

  Hi, I've a Windows 2008 SBS running. It boots of iSCSI. That setup worked for months until yesterday. I intended to reboot and gained a: STOP 0x0000007b INACCESSIBLE_BOOT_DEVICE and no idea why. My setup hasn't changed. No new controller, no new or changed iSCSI targets, no new Network Card or IP address changes. I had all Windows Updates on it. Last known good: same STOP. Allow unsigned drivers: same STOP. Safe mode (all variants): same STOP. Mount target from a client: works. Filesystem check fine. I booted of the SBS DVD but in computer repair options my target doesn't appear. When i choose setup the target appears. So, how can i diagnose what's going wrong? Any helpful tools? Any hints? Thanks in advance Michael

  Read the article

• Ubuntu: Network connection seems to fail after some time

  - by chrischu

  I just bought a Shuttle XS-35 barebone mini-PC and put a 1 TB WD hard drive and 2 Gigs of RAM into it and installed Ubuntu onto it. The machine will post as a media server (streaming videos to my PS3) and as a webserver for some small private projects. Now I wanted to copy my videos from my Windows 7 machine to the Ubuntu machine and therefore created a Samba share on the Ubuntu machine. I tried copying the files with the standard Windows copy function and with SyncToy but after some time (sometimes 5 copied files, sometimes 120 copied files) the Samba share just disappears. When that happens I can't reach the internet from the Ubuntu machine although the network connection still seems to be fine (IP still there etc.). Between the machines lies a LinkSys router. When I try to ping my router (after the connection doesn't work anymore) from the Ubuntu machine only a very small subset of the packages actually get there (something around 20%). When I restart the Ubuntu machine everything seems to work normal again. I have no idea where the problem lies here. Does anybody have a clue? Thanks in advance!

  Read the article

< Previous Page | 807 808 809 810 811 812 813 814 815 816 817 818  | Next Page >