Search Results

Search found 21316 results on 853 pages for 'google gson'.

Page 813/853 | < Previous Page | 809 810 811 812 813 814 815 816 817 818 819 820  | Next Page >

• GPO Software Uninstall Not Taking Place

  - by burmat

  I am having some trouble with my software GPO's and can't seem to find any answers using Google. I successfully deployed software using my policy but when I delete another, the uninstallation of the software does not take place. What I did: Deployed software using a GPO, used gpupdate /force on the workstation to update, reboot, and install the software Deleted another software installation by: Right-Click All Tasks Remove 'Immediately uninstall the software from users and computers' From there, I did another gpupdate /force to try and get the GPO to refresh and uninstall the software on the workstation. This did not work. I then forced replication between my domain controllers and ran another gpupdate /force on the workstation and this did not uninstall the software. There are not error logs or indications that the uninstall is being triggered when I go into the event viewer, and I know for a fact that the policy is working in other aspects. So my questions is: Where do I look next to find the answer as to why GPO software deployments are working but un-installations are not, based off of what I have already tried? Thank you in advance. UPDATE: After using gpresult /z, there is no indication of a pending un-installation or removal of software. Under the section entitled "Software Installations", the software I am trying to uninstall is not listed. There is no other indication that the software I am trying to uninstall even exists. I also turned on RSoP logging and did (yet another) gpupdate /force to yield no blatant results. There is no indication that an uninstall event was even triggered, let alone incapability or failure. Although I am sure I marked it to uninstall in case of two events (the falling out of the scope of management, as well as the removal of the entry), I am beginning to think the entry just never triggered something that should have been triggered. UPDATE #2: After troubleshooting this (frustrating) application assignment, I have chalked it up as a fluke. I have tested with other software to make sure that the uninstall of other application assignments is actually working, so I am assuming it is something related to the package directly. There is the possibility that my problem resides in something related to what @joeqwerty linked in a comment below but because I can't go back in time, I don't think I will be able to prove it. I will probably be running a script via another GPO to guarantee the un-installation of left over package installs. For now, Evan Anderson is getting the answer because of the debugging information I was able to put to good use. Thank you to everyone that helped contribute so far!

  Read the article

• Installing Yaws server on Ubuntu 12.04 (Using a cloud service)

  - by Lee Torres

  I'm trying to get a Yaws web server working on a cloud service (Amazon AWS). I've compilled and installed a local copy on the server. My problem is that I can't get Yaws to run while running on either port 8000 or port 80. I have the following configuration in yaws.conf: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true This produces the following successful launch/result: Eshell V5.8.5 (abort with ^G) =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Using config file /home/ubuntu/yaws.conf =INFO REPORT==== 16-Sep-2012::17:21:06 === Ctlfile : /home/ubuntu/.yaws/yaws/default/CTL =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:8000 for <3> virtual servers: - http://domU-12-31-39-0B-1A-F6:8000 under /home/ubuntu/yaws/www/trial - =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:4443 for <1> virtual servers: - When I try to access the the url (http://ec2-72-44-47-235.compute-1.amazonaws.com), it never connects. I've tried using paping to check if port 80 or 8000 is open(http://code.google.com/p/paping/) and I get a "Host can not be resolved" error, so obviously something isn't working. I've also tried setting the yaws.conf so its at Port 80, appearing like this: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true and I get the following error: =ERROR REPORT==== 16-Sep-2012::17:24:47 === Yaws: Failed to listen 0.0.0.0:80 : {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Can't listen to socket: {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =INFO REPORT==== 16-Sep-2012::17:24:47 === application: yaws exited: {shutdown,{yaws_app,start,[normal,[]]}} type: permanent {"Kernel pid terminated",application_controller," {application_start_failure,yaws,>>>>>>{shutdown,>{yaws_app,start,[normal,[]]}}}"} I've also opened up the port 80 using iptables. Running sudo iptables -L gives this output: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- ip-192-168-2-0.ec2.internal ip-192-168-2-16.ec2.internal tcp dpt:http ACCEPT tcp -- 0.0.0.0 anywhere tcp dpt:http ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination In addition, I've gone to the security group panel in the Amazon AWS configuration area, and add ports 80, 8000, and 8080 to ip source 0.0.0.0 Please note: if you try to access the URL of the virtual server now, it likely won't connect because I'm not running currently running the yaws daemon. I've tested it when I've run yaws either through yaws or yaws -i Thanks for the patience

  Read the article

• What other protocols must not be fire-walled for FTP to work?

  - by Chris

  my Netgear router randomly reset itself the other day loosing all of my config settings: DSL details, Firewall rules, the lot! So I set about restoring all of the details manually, but when it came to configuring the firewall I wanted improve the security by explicitly setting 'deny' rules for everything that I figured is 'non-essential', and (although not necessary) whilst I was at it I set explicit 'allow' for the 'essential' protocols. I'll admit now I didn't really know what I was doing and everything was just 'my best guess', but I enabled only DNS, HTTP, HTTPS, FTP, SFTP, TFTP with everything else blocked. This did not work for me as I could not access 99% of web sites (although strangely Google worked!), so I played around a bit more and found that (oddly) if I disabled just the explicit 'allow' rules then everything worked fine, for browsing anyway. Today I came to work on some web-sites via FTP and just could not get a consistent connection, it kept dropping out after a few files or being blocked by the server or simply not connecting. It would authenticate okay but then stop when retrieving the initial directory listing! e.g.: Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.domain.co.uk Status: Resolving address of ftp.domain.co.uk Status: Connecting to 123.123.123.123:21... Status: Connecting to 123.123.123.123:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... I've checked and re-checked the FTP settings (they worked before anyway), I have Googled the I.T. out of the various protocols that I have blocked in the fire-wall but none seem essential to FTP (other than FTP/SFTP etc. which I have passively enabled). I'm (clearly) no server engineer, or protocols / fire-wall expert so I was hoping that some one could maybe shed some light on why my FTP is failing. I've been wondering if I ought to be allowing BGP, BOOTP and/or IDENT (or any others)? What other protocols are required for FTP? Thanks in advance!

  Read the article

• Setting up Apache and PHP on Mac OS X Snow Leopard

  - by Martin Bean

  I've recently purchased an Apple iMac. Unfortunately, enabling Apache and PHP has thrown up some problems. I enabled Mac's built-in Web Sharing through System Preferences, at which point I got an output and could add HTML files to my user directory. However, PHP files were being displayed rather than interpreted. I then discovered this is because PHP isn't enabled by default on Mac's Apache set-up. After a quick Google search, I came across this page: http://developer.apple.com/mac/articles/internet/phpeasyway.html I proceeded to the section, Enabling PHP in Apache, copying and pasting the following code snippet into a new Terminal window and hitting Return: set admin_email to (do shell script "defaults read AddressBookMe ExistingEmailAddress") user_www=$HOME/Sites filename=php-test user_index=${user_www}/${filename}.php user_db=${user_www}/${filename}-db.sqlite3 # NOTE: Having a writeable database in your home directory can be a security risk! conf=`apachectl -V | awk -F= '/SERVER_CONFIG/ {print \$2}'| sed 's/"//g'` conf_old=$conf.$$ conf_new=/tmp/php_conf.new touch $user_db chmod a+r $user_index chmod a+w $user_db chmod a+w $user_www echo "Enabling PHP in $conf ..." sed '/#LoadModule php5_module/s/#LoadModule/LoadModule/' $conf | sed "s^[email protected]^<b>\$admin_email</b>^" > $conf_new echo "(Re)Starting Apache ..." osascript <<EOF do shell script "/bin/mv -f $conf $conf_old; /bin/mv $conf_new $conf; /usr/sbin/apachectl restart" with administrator privileges EOF Unfortunately, this has completed thrown Apache and now nothing is being served; instead I'm receiving "Failed to open page" errors because it cannot connect to the server, despite Web Sharing still being active in System Preferences. So therefore I guess my question is this: how can I undo the changes made by the copy-and-pasting of the above code snippet? Admittedly, I don't understand what the above did; I just thought it looked like a Terminal command and tried it. I have no experience in setting up Apache on Mac OS X (and I've only installed XAMPP and WampServer on Windows). So any points on reversing the aforementioned, and then successfully enabling PHP would be great. EDIT: I've discovered, via Console, the following error message is being recorded when trying to browse to 127.0.0.1... (org.apache.httpd) Throttling respawn: Will start in 10 seconds no listening sockets available, shutting down Unable to open logs (org.apache.httpd[13453]) Exited with exit code: 1 Does this point any more to the issue? EDIT #2: I'm now getting this in Console... 15/02/2010 21:24:14 osascript[3597] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find: /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

  Read the article

• How to add IP range to a server?

  - by Efe Cakinberk

  Hello, First of all I must say that I'm ver inexperienced server and network user. But I rented a unmanaged dedicated server. Well I didn't know what unmanaged really means, then I learned it when I needed support. Well I must do everything by myself. I have a problem. I had already 4 IPs on my server when I rented it. But then I needed more Ips and my server assigned me 32 Ips in which I can only use 27 of them. 85.25.230.0 - 85.25.230.31 this is my Ip range and they say the following Ips must not be configured on the server: 85.25.230.0 - network address 85.25.230.1 - gateway address 85.25.230.2 - router redundancy 85.25.230.3 - router redundancy 85.25.230.31 - broadcast address But the problem is ok Ips are assigned to me but they are not setup on my server. How will I setup Ips to work on my server? I did this after my reseach on google: I used this command on command prompt: route add 85.25.230.0 mask 255.255.255.224 85.25.230.1 metric 1 if then it said OK!. and I thought they should be working. (btw, mask is given to me by my ISP and I don't know metric 1 and if means I just saw it on the net and write it here) I setup my domains via using Plesk Kontrol Panel. So i added one domain and setup one of my new Ips 85.25.230.5 to it. But no it is not working. When I visit the domain via browser, there is a Plesk page comes and says this domain is not configured on the server. Then I changed the domains Ip to one of my old Ips which are given to me with the server and which I have been using for my other domains for a long time. Ok in a second, domain started working. I set it back to my new Ip and domain did not work. As I said, I'm not an expert and do not now the logic. But I'm eager to learn. Can you tell me what might couse the problem and did I do wrong while setting up IP RANGE to my server, if so how can I set them up? Thank you, Efe

  Read the article

• Email delivery management grievances

  - by joxl

  The question I have may be more of principle than anything else, but here's my dilemma. I manage an email system for a small company (about 20 email users). We own a plain-letter .com domain name through Network Solutions. Our email service is hosted by Google Apps. Recently (Feb. 2011) we've been having customers report that they aren't getting our emails. Upon further investigation it seems that the failed emails are all to a common (well known) domain. We have not received any bounce messages for the emails. We've also contacted a few of the intended recipients, who have reported that the messages are not in their spam box; they simply did not receive anything. In these cases we re-sent the same email to an alternate address on another domain, which was successful received. One customer contacted their email provider about the issue. The provider recommended that we submit a form to be white-listed by their domain. Here's where my problem begins. I feel like this is heading down a slippery slope. Doesn't this undermine the very principle of email? If this is the appropriate action to take in these situations where will it end? In theory (following this model) it could be argued that eventually one will first need to "whitelist" (or more appropriately termed "authenticate") themselves with an email host before actually sending any messages. More to this point, what keeps the "bad" spammers from doing the same thing...? We've just gone full circle. I know avoiding anti-spam measures is a big cat-and-mouse game, but I think this is the wrong way of "patching" the problem. Email standards say that messages should not just disappear silently. I have a problem supporting a model that says "you must do < this to make sure your emails aren't ignored". I have a notion to call the provider and voice my complaint, although I have a feeling it will probably fall on deaf ears. Am I missing something here? Is this an acceptable approach to email spam problems? What should I do?

  Read the article

• Video memory buswidth vs video memory Bandwidth

  - by Mixxiphoid

  My current video card (9600GT) is dying and I'm searching for a new video card. Between acquiring my current one and now, I got a lot more knowledge about hardware and I want to use that to pick my new card. So I decided to not just buy some popular card blindly, but to search for a card able to handle my hardware requirements. I searched the specs at the NVidia site for the GT640 and was confused by the memory section and some questions raised. My current card's memory bus width is 256bit and has 1GB of memory. I checked Google about the importance of bus width. And all the links basically said the same 'The higher the number the more potential simultaneously traffic can be transferred'. This was already clear to me, yet there are currently a lot of new cards which are considered better than my current one with a lower bus width. To go in more detail about my question I copied the memory info from the NVidia site: GT 640 GT640 GDDR5 Memory Specs: Memory Clock 1.8 Gbps 5.0 Gbps Standard Memory Config 2048 MB 1024 MB Memory Interface DDR3 GDDR5 Memory Interface Width 128-bit 64-bit Memory Bandwidth (GB/sec) 28.5 40.0 What puzzled me is that the Memory Bandwidth seems to me the most important part, yet the lower bus width has the higher 'performance'. Is this due to the fact the memory interface is GDDR5 and is therefore able to have a higher memory clock speed (5Gbps)? If I am to buy a new video card, should I check the bus width? Memory clock? Bandwith? Amount of memory? My current card ahs 1GB memory, so I was searching for a 2GB memory card, but now I'm not so sure any more whether that is really 'better'. My main question: To me it seems that memory performance is made up by the combination of bus width and frequency. Is this true? If yes, why are there so many sites telling me I need to get a card with a high bus width? If no, then what IS important when it goes about memory performance on a video card. NOTE: The memory bandwidth is (almost) never displayed on vendor sites. How can I determine which card is better without knowing the bandwith?

  Read the article

• HP MSR 30-10a Router - Route Traffic over Default Route

  - by SteadH

  We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

  Read the article

• NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

  - by Corey Kennedy

  What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help! edit: 1/19/2011 Well, this is truly bizarre. To my knowledge I've made no changes to either system - the laptop or the server. But today after starting up the server for the first time in a few days, and making sure that nxserver was running, I was able to connect with the nxclient from my laptop with no problems. I have a full desktop in a single window and I am able to interact with it normally. This is really weird, but the problem seems to be resolved.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Windows cannot find the host name "download.microsoft.com" using DNS

  - by joedotnot

  When trying to download a file found on the Microsoft downloads center that starts with, for example, http://download.microsoft.com/download/6/8/7/(some_GUID)/(some_file_name.ext) i get a timeout with "Internet Explorer cannot display the webpage". More information says: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. Diagnose Connection problems says: Windows cannot find the host name "download.microsoft.com" using DNS Bear with me while i expand on the problem: It all started when i tried to download Windows XP mode for my Windows 7 machine. I went to the virtual PC site, then thru the motions of Windows Genuine Advantage which validated ok, but when it redirects to grab the file just times out with above error. (NB: i also tried with the latest Chrome and Firefox but no use due to the Genuine Advantage stuff, so i decided to stick with IE). I am behind an ADSL2+ modem router connecting via wireless (Win 7 Pro laptop); so i hop over to the desktop connected via ethernet (Vista Business), and same result; begin to think site download.microsoft.com site is down. So i give it a break an read up on EDNS, flushing the cache, hosts file, etc... Try again an hour later on the Win 7 machine, still no go; so i turn off the Win 7 (software) firewall, and lo and behold, i can connect and grab any files from download.microsoft.com; (...nice, so we have a Micro$0ft firewall preventing access to a Micro$0ft website, no wonder my auto-updates kept failing but that's another story). But i still am not happy that the desktop connected via ethernet still cannot get to download.microsoft.com, even though i turned off all firewalls, defenders, anti-virus, etc. What is so special / specific about the url download.microsoft.com, any other site is ok, including www.microsoft.com. Any networking guru know what's REALLY going on, and how can i get the desktop to connect? Ping download.microsoft.com - Ping request could not find host download.microsoft.com. Please check the name and try again. Ping google.com or even www.microsoft.com works gives me an IP address. NB: On the wireless laptop ping download.microsoft.com works, i get xxxx.ms.akamai.net [202.7.177.33].

  Read the article

• Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

  - by Weston C

  I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

  Read the article

• Malicious program changing my DNSs

  - by julio.alegria

  Some weeks ago I started having problems with my internet connection, it was extremely slow and suddently some websites (specifically gmail, facebook, youtube and twitter) started failing to connect, while the rest connect normally. Some days after, those same websites started showing me a message in portuguese: "Nova atualização disponível" whenever I tried to connect and a .exe file started downloading ("internet_update.exe" or something like that). That's when I freaked out! It was definitely a virus or something like that, but it was really weird because I never had a problem like that (I run Linux). So I turned on my old PC (running Windows XP) and it turned out it had the same problem! the same message was showed whenever I tried to connect one of those specific websites, while the rest loaded without problems. Even in my Android smarthphone the same message was showed. So it was obvious that the problem was not in a particular machine but in the router itself. So I started googling and I found some information, unfortunately I only found some in spanish, so I will make you a short summary: It is a new banking trojan developed specifically to infect and collect information from Brasilian banks. Apparently now it has expanded to Argentina and Peru. So how does it work? It spreads through social networks (videos, links, ...) and then it "takes control" of your internet connection by changing the values of your DNSs. More specifically, it changes the Primary DNS to one of this IPs: 108.170.13.38, 66.7.216.122 or 63.143.43.154 and the Secondary DNS to 8.8.8.8, this secondary DNS is actually the Google Public DNS, and it is configured this way so that your internet connection continue working properly and the user does not notice anything. The important part here is that because no download or install has been made in your machine, no antivirus will notice any change. After your DNSs have been changed, the trojan controls every single website you connect to and this way they steal your bank information. So after reading about this I accesed to my router and I restored my Primary and Secondary DNSs to their proper values, but one day after I had the same problem again. This is actually a 50% warning post - 50% help me! post. So, here comes the question: Is there any possible way to prevent my DNSs of being changed?

  Read the article

• CPU Lockup when loading folder of bookmarks in Firefox

  - by Gary M. Mugford

  I am running Firefox 3.6 on WinXPSP3 on a duo Core machine with 4G of memory. I am also running Avast! free anti-virus and ZoneAlarm free firewall, both latest versions. Within the last month, my service provider basically forced me to upgrade to a Docsis 3.0 compliant modem (offered me a deal I couldn't turn down). At that point, I also upgraded to FF3.6. Basically, I am not unhappy with many aspects of this switchover, EXCEPT, when I now load a folder of bookmarks (anywhere from 10 to 38) I get nothing like the load times I experienced a couple of months back. It's taking minutes rather than seconds. And the first bookmark in one of the folders, GMail, rarely loads before timing out. I have used the old trick of powering off the cable modem before my day's work. This used to fix 'load-lag' in the old days. I have switched from my ISP's DNS server to Google, OpenDNS and back. And nothing seems to work currently. It's not my DNS cache. That's been flushed and secondary computers also have the same issue when loading folders. I have watched the CPU usage and loading the folder will send VSMon (ZoneAlarm) usage over 40 percent, AVastSvc (Avast!) over 30 and Firefox will then push the needle to 100. There's a brief burst by SVCHost when the others falter in devouring cycles. Then everything subsides to single digits once the last tab is loaded. The only other nominal nastiness is VSMon ALWAYS hitting 50 percent when ANY program starts downloading content from the internet. If I shutdown ZoneAlarm (and VSMon with it), the same slow loading takes place, but this time System is running 50% plus, again driving the usage to 100 per cent. I have my doubts FF3.6 vs FF3.5 is an issue, since the other computers are still running 3.5 and suffer the same issue. Those computers are on, but inactive, most of the time, being backups. Obviously, when the CPU hits 100, I can't do much of anything in FireFox OR in other programs. Video play through WMPC or VLC is extremely choppy, although it doesn't seem to affect the audio. Any ideas what I can try next? Thanks, GM

  Read the article

• How do I get the latest FastCGI and PHP versions to peacefully coexist on IIS 6?

  - by BHelman

  I have been going round and round trying to get any sort of PHP running on IIS 6. I somehow managed to successfully get version 5.1.4 running using the php5isapi.dll file. However, I want to upgrade a website to begin using a Content Management System. I have never dug into CMS before so I'm open to programs that are easy to use. I am currently looking into TomatoCMS and ImpressCMS - but that's beside the point. I have never done an installation with PHP before and I think I'm getting familiar with how it works. However the current situation is this. Microsoft's Web Platform Installer 2.0 installed FastCGI for me. I need to upgrade to PHP 5.3.1 for a CMS system. So I downloaded the Windows installer and let it go at it. After consulting several other blog articles, I believe I know how it is supposed to work but I am currently not having luck. THE SETUP *.php is a registered extension in IIS 6 for all websites (on Win 2k3). The application that it calls is C:\Windows\system32\inetsvr\fcgiext.dll, like it should. The fcgiext.ini config has the proper lines: [Types] php=PHP [PHP] ext=C:\program files\PHP\php-cgi.exe And the php.ini file also has the correct configs. All extensions are disabled and I changed the correct things for FastCGI. And everything is registered correctly with the PATH variable. Everything is exactly how it should be. BUT when I launch the "info.php" page () on another computer, I get the following error: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: * Section [PHP] not found in config file. * Error Number: 1413 (0x80070585). * Error Description: Invalid index. HTTP Error 500 - Server Error. Internet Information Services (IIS) A quick Google search reveals that I have it all setup correctly as far as the INI's go and the mapping of the php extension. I am completely at a loss. Does anyone have any suggestions? Although the server is hosting three small websites, I don't really care what I have to do to it to get it to work.

  Read the article

• Why can I view my site over a 3G connection but not through my wifi?

  - by Jonathan

  So, I am sitting in my office with four computers on the same network and internet connection. Two of the computers can visit this particular website. Two of the computer get a message "Google Chrome could not find". I have tried FF and IE also with the same problem. I can view the site 90% of the time on two of the working computers although the site seems slow and sometimes I also get the same errors as the other two computers. I have flushed the DNS, reset the router, tested the site on other peoples computers with success. Is this likely to be a site issue, an ISP issue, a hosting issue? Any advice is greatly appreciated. Here is the ping from the working machine: C:\Users\Jon>ping www.balihaicruises.com Pinging www.balihaicruises.com [208.113.173.102] with 32 bytes of data: Reply from 208.113.173.102: bytes=32 time=331ms TTL=47 Reply from 208.113.173.102: bytes=32 time=327ms TTL=47 Reply from 208.113.173.102: bytes=32 time=326ms TTL=47 Reply from 208.113.173.102: bytes=32 time=329ms TTL=47 Ping statistics for 208.113.173.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 326ms, Maximum = 331ms, Average = 328ms Traceroute: Tracing route to www.balihaicruises.com [208.113.173.102] over a maximum of 30 hops: 1 1 ms 17 ms 3 ms 192.168.1.1 2 42 ms 37 ms 36 ms 180.254.224.1 3 39 ms 47 ms 40 ms 180.252.1.69 4 36 ms 616 ms 57 ms 61.94.115.221 5 84 ms 76 ms 80 ms 180.240.191.98 6 73 ms 80 ms 72 ms 180.240.191.97 7 157 ms 143 ms 116 ms 180.240.190.82 8 115 ms 113 ms 120 ms ae1-123.hkg11.ip4.tinet.net [183.182.80.93] 9 331 ms 332 ms 335 ms xe-3-2-1.was14.ip4.tinet.net [89.149.184.30] 10 327 ms 330 ms 331 ms internap-gw.ip4.tinet.net [77.67.69.254] 11 437 ms 415 ms 350 ms border10.pc2-bbnet2.wdc002.pnap.net [216.52.127.73] 12 322 ms 823 ms 398 ms dreamhost-2.border10.wdc002.pnap.net [216.52.125.74] 13 328 ms 336 ms 326 ms ip-208-113-156-4.dreamhost.com [208.113.156.4] 14 326 ms 328 ms 336 ms ip-208-113-156-14.dreamhost.com [208.113.156.14] 15 327 ms 331 ms 333 ms apache2-udder.crisp.dreamhost.com [208.113.173.102] And then for the machine that doesn't work: C:\Users\Microsoft>ping www.balihaicruises.com Ping request could not find host www.balihaicruises.com. Please check the name and try again. C:\Users\Microsoft>tracert www.balihaicruises.com Unable to resolve target system name www.balihaicruises.com.

  Read the article

• Strange traceroute to msdn.microsoft.com

  - by Jasper

  The problem is I could not view any msdn.microsoft.com/* site and the main site itself on my Ubuntu box on Google Chrome browser. Error is: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. When I run traceout I get different result: Here is simple one: traceroute msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.121 ms 0.131 ms 0.128 ms 2 192.168.0.1 (192.168.0.1) 1.730 ms 1.724 ms 2.024 ms 3 bzq-179-37-1.static.bezeqint.net (212.179.37.1) 18.314 ms 19.277 ms 20.694 ms 4 bzq-218-227-250.red.bezeqint.net (81.218.227.250) 22.806 ms 23.651 ms 24.820 ms 5 bzq-179-75-198.static.bezeqint.net (212.179.75.198) 26.650 ms 27.533 ms 28.791 ms 6 * * * 7 bzq-179-124-122.static.bezeqint.net (212.179.124.122) 76.032 ms 72.968 ms 74.660 ms 8 igblmdistc7504.uk.msft.net (195.66.224.140) 75.708 ms 76.797 ms 78.257 ms 9 ge-5-1-0-0.lts-64cb-1a.ntwk.msn.net (207.46.42.227) 80.125 ms 81.336 ms 82.671 ms 10 ge-7-0-0-0.nyc-64cb-1a.ntwk.msn.net (207.46.47.20) 179.232 ms so-7-1-0-0.ash-64cb-1b.ntwk.msn.net (213.199.144.158) 162.508 ms 163.223 ms 11 xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 227.964 ms ge-7-0-0-0.co1-64c-1b.ntwk.msn.net (207.46.40.90) 228.226 ms xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 212.781 ms 12 10.22.8.54 (10.22.8.54) 215.046 ms xe-5-2-0-0.co1-96c-1a.ntwk.msn.net (207.46.40.167) 214.825 ms 10.22.8.58 (10.22.8.58) 213.251 ms 13 10.22.8.62 (10.22.8.62) 212.745 ms 213.827 ms 10.22.8.50 (10.22.8.50) 215.655 ms 14 10.22.8.62 (10.22.8.62) 211.665 ms !X 10.22.8.50 (10.22.8.50) 214.491 ms !X 10.22.8.54 (10.22.8.54) 218.471 ms !X Line 1,2 : It's me Line from 3-7: It's my Internet provider Line 8 and on: I think I hit MS servers WTF line 12-14 ????? 10.22.8.x ???? then I run this traceroute: sudo traceroute -T msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.109 ms 0.127 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 65.55.11.235 (65.55.11.235) 16.019 ms 17.364 ms So I hit MSDN web site already at 6 hop ! WTF ??? This is host -a msdn.microsoft.com from me: host -a msdn.microsoft.com Trying "msdn.microsoft.com" ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 19522 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;msdn.microsoft.com. IN ANY ;; ANSWER SECTION: msdn.microsoft.com. 3274 IN CNAME msdn.microsoft.akadns.net. msdn.microsoft.akadns.net. 600 IN A 65.55.11.235 Received 91 bytes from 127.0.0.1#53 in 108 ms Could someone help me understand and fix it ??

  Read the article

• Certain Programs cannot access internet

  - by Cindy

  Operating System: Windows 7 (x64) Problem: Certain Programs are unable to access the internet. They claim that there is no connection when you already are connected. Hello, before we start. Just letting you know I'm new here, and I'm very new to Windows 7. I installed it two days ago. I just installed Windows 7 on my laptop and I have a few problems. I play World of Warcraft, as well as a variety of games. And when I first attempt to log into the game, I get a windows error message, but it doesn't stop there. I thought World of Warcraft got corrupted during the upgrade. It seems that I am unable to access the internet from other online games as well. Most say in along the lines of "Cannot connect to patch server, try again later." I cannot use a downloader Also, I have internet explorer. The x32 version of the browser cannot connect to the internet, and when I try to enter "google.com", it says the same thing. I'm only accessing this site through Internet Explorer x64, which I would have been fine with is it's compatible with Adobe Flash. The only thing that seems to connect to the internet are Internet Explorer x64 and Windows Live Messenger. Here are the steps I have taken, but none worked. 1.) Disable Windows Firewall 2.) Have Windows Firewall Enabled, but allow the specific programs to access internet. And allowed all incoming access. 3.) Disabled UAC, Ran the programs as an admin, and set compatibility to Vista. 4.) Uninstalled an anti-virus program. (McAffee Security Suite 2010) 5.) Reinstalled the programs 6.) Reinstalled Windows 7 7.) Retaken the steps on the Administrator account. Please assist me in this problem. I need to get back into the game. Thanks so much in advance.

  Read the article

• debian gateway using iptables

  - by meijuh

  I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

  Read the article

• Trouble using gitweb with nginx

  - by Rayne

  I have a git repository in a directory inside of /home/raynes/pubgit/. I'm trying to use gitweb to provide a web interface to it. I use nginx as my web server for everything else, so I don't really want to have to use another just for this. I'm mostly following this guide: http://michalbugno.pl/en/blog/gitweb-nginx, which is the only guide I can find via google and is really recent. fcgiwrap apparently isn't in Lucid Lynx's repositories, so I installed it manually. I spawn instances via spawn-fcgi: spawn-fcgi -f /usr/local/sbin/fcgiwrap -a 127.0.0.1 -p 9001 That's all good. My /etc/gitweb.conf is as follows: # path to git projects (<project>.git) #$projectroot = "/home/raynes/pubgit"; $my_uri = "http://mc.raynes.me"; $home_link = "http://mc.raynes.me/"; # directory to use for temp files $git_temp = "/tmp"; # target of the home link on top of all pages #$home_link = $my_uri || "/"; # html text to include at home page $home_text = "indextext.html"; # file with project list; by default, simply scan the projectroot dir. $projects_list = $projectroot; # stylesheet to use $stylesheet = "/gitweb/gitweb.css"; # logo to use $logo = "/gitweb/git-logo.png"; # the 'favicon' $favicon = "/gitweb/git-favicon.png"; And my nginx server configuration is this: server { listen 80; server_name mc.raynes.me; location / { root /usr/share/gitweb; if (!-f $request_filename) { fastcgi_pass 127.0.0.1:9001; } fastcgi_index index.cgi; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } } The only difference here is that I've set fastcgi_pass to 127.0.0.1:9001. When I go to http://mc.raynes.me I'm greeted with a page that simply says "403" and nothing else. I have not the slightest clue what I did wrong. Any ideas?

  Read the article

• Can't get virtual desktops to show up on RDWeb for Server 2012 R2

  - by Scott Chamberlain

  I built a test lab using the Windows Server 2012 R2 Preview. The initial test lab has the following configuration (I have replaced our name with "OurCompanyName" because I would like it if Google searches for our name did not cause people to come to this site, please do the same in any responses) Physical hardware running Windows Server 2012 R2 Preview full GUI, acting as Hyper-V host (joined to the test domain as testVwHost.testVw.OurCompanyName.com) with the following VM's running on it VM running 2012 R2 Core acting as domain controller for the forest testVw.OurCompanyName.com (testDC.testVw.OurCompanyName.com) VM running 2012 R2 Core with nothing running on it joined to the test domain as testIIS.testVw.OurCompanyName.com A clean install of Windows 7, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it A clean install of Windows 8, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it I then ran "Add Roles and Features" from testVwHost and chose the "Remote Desktop Services Installation", "Standard Deployment", "Virtual machine-based desktop deployment". I choose testIIS for the roles "RD Connection Broker" and "RD Web Access" and testVwHost as "RD Virtualization Host" The Install of the roles went fine, I then went to Remote Desktop Services in server manager and wet to setup Deployment Properties. I set the certificate for all 3 roles to our certificate signed by a CA for *.OurCompanyName.com. I then created a new Virtual Desktop Collection for Windows 7 and Windows 8 and both where created without issue. On the Windows 7 pool I added RemoteApp to launch WordPad, For windows 8 I did not add any RemoteApp programs. Everything now appears to be fine from a setup perspective however if I go to https://testIIS.testVw.OurCompanyName.com/RDWeb and log in as the use Administrator (or any orher user) I don't see the virtual desktops I created nor the RemoteApp publishing of WordPad. I tried adding a licensing server, using testDC as the server but that made no difference. What step did I miss in setting this up that is causing this not to show up on RDWeb? If any additional information is needed pleas let me know. I have tried every possible thing I can think of and I am just groping around in the dark now. The virtual machines running on testVwHost The configuration screen for RD Services The Windows 7 Pool The Windows 8 Pool This is logged in as testVw\Administrator

  Read the article

• Looking for a NTP Server Software for Windows

  - by Simon

  I'm looking for a, preferably free, NTP Server for Windows Server 2003/2008. We have already tried the built in Windows Time Server, but our tests did show that it is not very accurate, we see time differences up to 500ms. The max time difference we can allow for our application is ~100ms. Now we have already used the Meinberg NTPd for Windows. It works great except we have one big issue with it: If there is a network connection problem between the client and server, the ntp server is in a panic state It won't give the client a new time until we restart the ntp service. This is a big issue which has caused us some trouble. It was working fine for months until there was a network problem we didn't notice, we only noticed it after a week when the time difference was already 30 sec. on the clients. So please suggest some alternative NTP Server for windows. I did Google but I get a lot of unrelated search results. Edit: So far the ntpd windows version was very accurate and I'd like to stick with it. The only problem is the "panic state" after a network disconnect. Maybe some knows here what the cause of this is and how to fix it. Also, I forgot to mention that we have a server/client setup like this: Server1 -- Server2 -- Server3 -- Client1 -- Client2 -- Client3 So Server2 gets its time from Server1, Server3 gets its time from Server2, and the Clients get their time from Server3. Also, there are clients connected directly to Server2. It is important that all Servers and Clients have the exact same time (within ~100ms) Now there was a network problem with Server3 and its clients. The servers run the ntpd port for Windows, which acts as NTP server and client. The clients have Dimension4 as NTP client. After the network problem, the error message in D4 was something like this (out the top of my head, don't have the exact error message): Server response: The server is in a panic state (could not sync clock) I read through the ntpd docs, and the only mention of "panic" is when the time difference is 10000 seconds which will cause to exit the ntpd server but this was not the case. Also there is a "-g" command line switch to disable the panic exit, but it is already set by default. Any ideas what could cause the panic state and how to get rid of it next time?

  Read the article

• Why many applications close after opening a document or doing a specific actions?

  - by Mohsen Farjami

  I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

  Read the article

• opening adobe reader results in infinite explorer.exe process creation loop

  - by irrational John

  First, apologies if the answer to this is only a Google away. I tried, honest I did. But I wasn't able to find anything about this problem posted elsewhere. I'm using Adobe Reader v9.3.2 in Windows 7 Home Premium 64-bit. If you want more system details, then just request them. What happens is that when I attempt to open a PDF by clicking "Open" on it then (1) adobe reader never opens and (2) the explorer.exe program is (apparently) recursively opened. I base this on opening the Task Manager and seeing a long list of explorer.exe processes under the "Processes" tab. Usually there is only one. When I recreate this problem, the list of explorer.exe processes are at least a page or two long. (Too many to bother counting). I "correct" this problem by logging off and then logging back on. This kills all the explorer.exe tasks. Unfortunately I don't know another way to terminate them all. Now here's the curious part. This only happens when I attempt to "Open" a PDF file. If instead I use the context menu (right mouse click on the PDF) and select "Open with" and "Adobe Reader 9.3" then Adobe Reader opens the file with no problem. It seems that there is something wrong with the setting for the default open action for PDF files. However, I have been unable to fix this by changing the Windows setting. Here is what I have tried. When I open Control Panel > All Control Panel Items > Default Programs > Set Associations I do not find an entry for file type .pdf. There are only entries for .pdfxml and .pdx. When use "Open with" on a PDF file and select "Choose default program", the check box for "Always use the selected program to open this kind of file" is disabled (greyed out). I have uninstalled and reinstalled Adobe Reader but the problem persists. While obviously no lives are at stake here, this problem is annoying the frickin' heck out of me. If I forget and recreate this bug then I have to stop everything I'm doing to stop it. Any suggestions on how I might go about fixing this?

  Read the article

• ruby on rails gitorious setup on ubuntu

  - by dogmatic69

  Ive been trying to install gitorious for a while now which required ruby and rails etc. Ive finally got rails pages serving but cant finish the installation of gitorious because the gem version is too new. the error logs say please run 'rake ultrasphinx:configure' and that gives rake ultrasphinx:configure (in /var/www/apps/gitorious) rake aborted! uninitialized constant ActiveSupport::Dependencies::Mutex /var/www/apps/gitorious/Rakefile:10:in `require' (See full trace by running task with --trace) From searching google this is beacuse of the wrong gem verison. Cant find a way to down grade it. apparently sudo gem update --system 1.4.2 should do the trick but ubuntu 10.10 does not like this. ERROR: While executing gem ... (RuntimeError) gem update --system is disabled on Debian, because it will overwrite the content of the rubygems Debian package, and might break your Debian system in subtle ways. The Debian-supported way to update rubygems is through apt-get, using Debian official repositories. If you really know what you are doing, you can still update rubygems by setting the REALLY_GEM_UPDATE_SYSTEM environment variable, but please remember that this is completely unsupported by Debian. So i added export REALLY_GEM_UPDATE_SYSTEM=1 to .bashrc and reloaded it with . ~/.bashrc and still the same. ive tried various forms of setting this environmental variable with no luck. Ive also been told on #gitorious irc channel to add the file config/initializers/rubygems.rb with the line require "thread" to it. This has done nothing. EDIT: Just found another way which was rvm install rubygems 1.4.2 and it gave: Removing old Rubygems files... Installing rubygems dedicated to ruby-1.8.7-p334... Retrieving rubygems-1.4.2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 288k 100 288k 0 0 282k 0 0:00:01 0:00:01 --:--:-- 414k Extracting rubygems-1.4.2 ... Installing rubygems for /home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby ERROR: Error running 'GEM_PATH="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global" GEM_HOME="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334" "/home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby" "/home/ubuntu/.rvm/src/rubygems-1.4.2/setup.rb"', please read /home/ubuntu/.rvm/log/ruby-1.8.7-p334/rubygems.install.log WARN: Installation of rubygems did not complete successfully. TL;DR please tell me how to downgrade rubygems on ubuntu 10.10 or upgrade gitorious to work with 1.6.2 gems

  Read the article

< Previous Page | 809 810 811 812 813 814 815 816 817 818 819 820  | Next Page >