Search Results

Search found 48589 results on 1944 pages for 'system requirements'.

Page 813/1944 | < Previous Page | 809 810 811 812 813 814 815 816 817 818 819 820  | Next Page >

• LYNC / OCS... problems getting edge server working.

  - by TomTom

  New setup Lync 2010 (i.e. OCS 2010). I have serious problems getting my edge system going. Internally things work fine. Externally I am stuck. I have used the tester at https://www.testocsconnectivity.com/ and it also fails. NOTE: I use the domain xample.com / xample.local here just as example. Here is the setup. I have 2 internal hosts (lync.xample.local, edge.xample.local). edge.xample.com is also correctly in dns. and points to the edge.xample.local external assigned ip address (external interface). Externally, I have the following dns entries: edge.xample.com _sip._tcp - edge.xample.com 443 _sipfederationtls._tcp - edge.xample.com 5061 _sipinternaltls._tcp - lync.xample.local 5061 _sip._tls - edge.xample.com 443 My problem is that the ocs connection test always ends up trying to contact lync.xample.local (i.e. the internal address) when connecting to [email protected]. The error is: Attempting to Resolve the host name lync.xample.local in DNS. This shows me it clearly manages to connect to SOMETHING, but it does either fall through to the _sipinternaltls._tcp entry, OR it does get that internal entry wrongly from the edge system. Am I missing some entries or have some wrong?

  Read the article

• Incorrect directory permissions with OpenSSH on Cygwin on Windows Server 2008 SP2

  - by Davy Brion

  I ran into a weird directory permission problem when logged in to a Win2008SP2 (not R2) server through SSH. When I open a local cygwin shell on the server, i can do this: myUser@myServer ~ $ cd /cygdrive/c/Windows/System32/inetsrv/ myUser@myServer /cygdrive/c/Windows/System32/inetsrv $ cd config myUser@myServer /cygdrive/c/Windows/System32/inetsrv/config $ I have no issues accessing the 'config' directory when using a local cygwin shell. 'myUser' has all necessary permissions to access the directory as well. In fact, 'myUser' is a local administrator on the machine. Listing the permissions of the config folder through the local cygwin shell shows the following output: 4 drwx------+ 1 SYSTEM SYSTEM 0 Aug 2 09:38 config But when I log into the server with a SSH client (in this case Putty), i run into the following problem: myUser@myServer ~ $ cd /cygdrive/c/Windows/System32/inetsrv/ myUser@myServer /cygdrive/c/Windows/System32/inetsrv $ cd config -bash: cd: config: Permission denied It also doesn't list the proper permissions through SSH: 0 drwxr-x--- 1 ???????? ???????? 0 Aug 2 09:38 config When I look at the running processes on the server with Task Manager (with a remote desktop connection), it shows that all bash.exe processes are running under the 'myUser' account, so I don't understand why I can't access that particular directory through SSH but have no problems accessing it in a local cygwin shell. I'm using OpenSSH 5.9p1-1. I'm not sure what the Cygwin version is... I used the latest setup.exe (version 2.738) of Cygwin, but I can't seem the find any other Cygwin-related version number. I doubt that it's related to SSH/Cygwin though, because when I connect from the Win2008SP2 server to my local Win7 machine through SSH (using the same OpenSSH/Cygwin versions) I can access the /cygdrive/c/Windows/System32/inetsrv/config folder without issues. Does anyone have an idea on what the issue could be?

  Read the article

• Why do messenger keeps coming up when I adjust screen brightness?

  - by Asaf R

  My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

  Read the article

• Setting kernel memory for installing postgresql

  - by Matthieu Taymans

  My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

  Read the article

• LDAP Authentication fails with 500 or 401 depending on bind for Apache2

  - by Erik

  I'm setting up LDAP authentication for our Subversion repository hosted through Apache on a RHEL 5 system. I run into two different issues when I try to authenticate against Active Directory. <Location /svn/> Dav svn SvnParentPath /srv/subversion SVNListParentPath On AuthType Basic AuthName "Subversion Repository" AuthBasicProvider ldap AuthLDAPBindDN "cn=userfoo,ou=Service Accounts,ou=User Accounts,dc=my,dc=example,dc=com" AuthLDAPBindPassword "mypass" AuthLDAPUrl "ldap://my.example.com:389/ou=User Accounts,dc=my,dc=example,dc=com?sAMAccountName?sub?(objectClass=user)" NONE Require valid-user </Location> If I use the above configuration it continually prompts me with the Basic prompt and I have to eventually select Cancel, which returns a 401 (Authorization Required). If I comment out the bind parts it returns 500 (Internal Server Error), griping that authentication failed: [Mon Nov 02 12:00:00 2009] [warn] [client x.x.x.x] [10744] auth_ldap authenticate: user myuser authentication failed; URI /svn [ldap_search_ext_s() for user failed][Operations error] When I perform the bind using ldapsearch and filter for a simple attribute it returns correctly: ldapsearch -h my.example.com -p 389 -D "cn=userfoo,ou=Service Accounts,ou=User Accounts,dc=my,dc=example,dc=com" -b "ou=User Accounts,dc=my,dc=example,dc=com" -w - "&(objectClass=user)(cn=myuser)" sAMAccountName Unfortunately I have no control or insight into the AD part of the system, only the RHEL server. Does anyone know what the hang up is here?

  Read the article

• Getting some French-Canadian keyboard strokes to work on English keyboard

  - by Gradient

  I'm trying to use some of the French-Canadian keyboard stokes I'm used to on an English keyboard. I would like to change the behaviour of some keys. I was able to implement these changes in Vim, but I would like them to be applied system-wide (for Windows and Ubuntu). Here's what I want to implement : If I press [a, the character printed is â. When I press [r, something that's supposed to stay normal, the characters printed are [r. If I hold [ for 3 seconds, [ is printed. I want this delay to be applied to all my modified keys. I want to map < to ' and the characters 'e to è. The complex problem here is that I only want the ' beside the ; key to produce the è character, NOT when I press the < (remapped to ') then e. I'll show you a .vimrc file that implements this, now I want this behavior system-wide: set timeout timeoutlen=3000 ttimeoutlen=100 inoremap [a â inoremap [A Â inoremap [e ê inoremap [E Ê inoremap [i î inoremap [I Î inoremap [o ô inoremap [O Ô inoremap [u û inoremap [U Û inoremap 'a à inoremap 'A À inoremap 'e è inoremap 'E È inoremap 'u ù inoremap 'U Ù inoremap }e ë inoremap }E Ë inoremap }i ï inoremap }I Ï inoremap }u ü inoremap }U Ü inoremap ]c ç inoremap ]C Ç inoremap / é inoremap < '

  Read the article

• SQL 2008 Backups to UNC Share Failing 0xC002F210

  - by Matty Brown

  This problem is driving me NUTS!! We take backups of all of our production databases to a network share, which are then backed up to tape nightly. 8pm Mon-Fri - Full backup, followed by log backup 7am-7pm Mon-Fri, at half-hour interval - Log backup Our backups have been working in this manner since we migrated from SQL Server Standard 2000 to 2008, 3 years ago. Recently, the first log backup on Mondays have been failing. Not every time, but almost every time! The rest of the week, we've had no problems. I guess the issue may have something to do with the size of the log backup that's attempted after a weekend of no backups. Now onto the issue I need a fix for... All this week, every full backup on our biggest two databases have failed (Both backups < 1GB compressed). There's plenty of disk space on the source and destination servers. I'm guessing the issue is to do with the amount of time it takes to complete the backups of these databases, and/or the size of the backup files required to complete these backups. Changing the backup destination to local storage works fine (and very, very fast in comparison). From the Job History, I can find a few hints as to what the problem could be... Code: 0xC002F210 (Always this code, but a mix of the following descriptions...) "The operating system returned the error '64(failed to retrieve text for this error. Reason: 1815)' while attempting 'SetEndOfFile' on '\drserver\SQLBackups\Database.bak'. BACKUP DATABASE is terminating abnormally. "The operating system returned the error '64(failed to retrieve text for this error. Reason: 1815)' while attempting 'FlushFileBuffers' on '\drserver\SQLBackups\Database.bak'. BACKUP DATABASE is terminating abnormally. Please help save my hair and sanity!!

  Read the article

• SQL 2K5 - Multiple databases vs. Multiple files

  - by Bob Palmer

  Hey all, quick question. Our current legacy system was built using multiple distinct databases (about ten of them). These are all part of the same discreet system, and a large number of SPs and functionalty span multiple databases. There are also key relationships that span (for example, a header table may be in database A with history, etc. in database B). When deploying multiple copies of our app to the same server therefore, we have to use multiple instances (because the database names are coded into so many sprocs). We're evaluating the idea of taking these ten databases (about 30gb total with individual sizes ranging from 100mb to 10gb) and merging them into a single database. Currently, we have our databases spread accross multiple spindles for better IO. The question I have is whether or not there is any performance loss or benefit of having 10 different databases vs. 10 different database files? i.e. rather than having three databases (A, B, and C) Disk D: A.mdf (1gb) Disk E: B.mdf (4gb) Disk F: C.mdf (10gb) Disk G: A_Log.ldf, B_Log.ldf, C_Log.ldf have one database (X) Disk D: X1.mdf (5gb) Disk E: X2.mdf (5gb) Disk F: X3.mdf (5gb) Disk G: X1_log.ldf,X2_log.ldf,X3_log.ldf Thanks! -Bob

  Read the article

• Mail to Mailenable group sometimes bounces back because it cannot find one of the group members

  - by Stanley

  I am using MailEnable Enterprise Edition 6.53. On one of my PostOffices I have a group address set up with 5 members in the group. Under normal circumstances when someone sends a mail to this group then the mail gets successfully forwarded to all 5 members in the group. However, every now and then when a recipient sends to the group they get a bounce back message from us that the mail could not be delivered because one of the user's addresses was not found on the server. This could happen for any one of the 5 users in the group. The error message looks like: Message could not be delivered. Error was: The email address is not available on this system The following recipient(s) could not be reached: [SF:mydomain.com/my_username] What could be causing this and how do I fix it? Obviously the mailbox DOES exist as, under normal circumstances, when someone mails the group the mail gets delivered successfully and forwarded to all group members. All the mailboxes most definitely DO exist on the system. EDIT: I have done more investigation and I see an error in Windows Event Viewer: MailEnable Database Provider error: 0 FAILURE: (SQLDriverConnect), Module: MEIMAPS.exe; Error: [Microsoft][ODBC SQL Server Driver]Timeout expired This seems to be related to http://forum.mailenable.com/viewtopic.php?p=53157 and http://www.mailenable.com/kb/content/view.asp?ID=ME020535 but the setups in these links use MySQL as a database whereas we use SQL Server. Maybe this shines some new light on the problem?

  Read the article

• How to debug a kernel created using ubuntu-vm-builder?

  - by user265592

  Aim: Trying to perform a code walkthrough of what functions are getting called for sending and receiving packets over the network. I am building a kernel and using gdb for debugging/ tracing purposes. I have build a vm using the following command : time sudo ubuntu-vm-builder qemu precise --arch 'amd64' --mem '1024' --rootsize '4096' --swapsize '1024' --kernel-flavour 'generic' --hostname 'ubuntu' --components 'main' --name 'Bob' --user 'ubuntu' --pass 'ubuntu' --bridge 'br0' --libvirt 'qemu:///system' And I can run the VM successfully in qemu using the following command: qemu-system-x86_64 -smp 1 -drive file=tmpGgEOzK.qcow2 "$@" -net nic -net user -serial stdio -redir tcp:2222::22 Now, I want to debug the kernel using gdb. For this I need an executable with debug symbols(vmlinux), which apparently I don't have, as the vm-builder never asked for any such options and simply created a .qcow2 file. Question 1: Am I taking the correct approach to solve the problem and is there an easier way to do it? Question 2: Is there a way to debug this kernel using GDB? P.S: I don't have hardware support for KVM. Please correct me if I am wrong. Thanks.

  Read the article

• Prevent outgoing traffic unless OpenVPN connection is active using pf.conf on Mac OS X

  - by Nick

  I've been able to deny all connections to external networks unless my OpenVPN connection is active using pf.conf. However, I lose Wi-Fi connectivity if the connection is broken by closing and opening the laptop lid or toggling Wi-Fi off and on again. I'm on Mac OS 10.8.1. I connect to the Web via Wi-Fi (from varying locations, including Internet cafés). The OpenVPN connection is set up with Viscosity. I have the following packet filter rules set up in /etc/pf.conf # Deny all packets unless they pass through the OpenVPN connection wifi=en1 vpn=tun0 block all set skip on lo pass on $wifi proto udp to [OpenVPN server IP address] port 443 pass on $vpn I start the packet filter service with sudo pfctl -e and load the new rules with sudo pfctl -f /etc/pf.conf. I have also edited /System/Library/LaunchDaemons/com.apple.pfctl.plist and changed the line <string>-f</string> to read <string>-ef</string> so that the packet filter launches at system startup. This all seems to works great at first: applications can only connect to the web if the OpenVPN connection is active, so I'm never leaking data over an insecure connection. But, if I close and reopen my laptop lid or turn Wi-Fi off and on again, the Wi-Fi connection is lost, and I see an exclamation mark in the Wi-Fi icon in the status bar. Clicking the Wi-Fi icon shows an "Alert: No Internet connection" message: To regain the connection, I have to disconnect and reconnect Wi-Fi, sometimes five or six times, before the "Alert: No Internet connection" message disappears and I'm able to open the VPN connection again. Other times, the Wi-Fi alert disappears of its own accord, the exclamation mark clears, and I'm able to connect again. Either way, it can take five minutes or more to get a connection again, which can be frustrating. Why does Wi-Fi report "No internet connection" after losing connectivity, and how can I diagnose this issue and fix it?

  Read the article

• how to set cache control to public in iis 7.5

  - by ivymike

  I'm trying to set cache control header to max age using the following snippet in my web.config: <system.webServer> <staticContent> <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="1.00:00:00" /> </staticContent> </system.webServer> Some how this isn't being reflected in the response. Instead I see a Cache-Control: private header on the responses. I'm using NancyFx framework (which is a layer on top of Asp.net). Is there any thing else I need to do ? Below are the reponse headers I receive: HTTP/1.1 200 OK\r\n Cache-Control: private\r\n Content-Type: application/x-javascript\r\n Content-Encoding: gzip\r\n Last-Modified: Mon, 19 Mar 2012 16:42:03 GMT\r\n ETag: 8ced406593e38e7\r\n Vary: Accept-Encoding\r\n Server: Microsoft-IIS/7.5\r\n Nancy-Version: 0.9.0.0\r\n Set-Cookie: NCSRF=AAEAAAD%2f%2f%2f%2f%2fAQAAAAAAAAAMAgAAADxOYW5jeSwgVmVyc2lvbj0wLjkuMC4wLCBDdWx0dXJlPW5ldXRyYWwsIFB1YmxpY0tleVRva2VuPW51bGwFAQAAABhOYW5jeS5TZWN1cml0eS5Dc3JmVG9rZW4DAAAAHDxSYW5kb21CeXRlcz5rX19CYWNraW5nRmllbGQcPENyZWF0ZWREYXRlPmtfX0JhY2tpbmdGaWVsZBU8SG1hYz5rX19CYWNraW5nRmllbGQHAAcCDQICAAAACQMAAADTubwoldTOiAkEAAAADwMAAAAKAAAAAkpT5d9aTSzL3BAPBAAAACAAAAACPUCyrmSXQhkp%2bfrDz7lZa7O7ja%2fIg7HV9AW6RbPPRLYLAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA%3d; path=/; HttpOnly\r\n X-AspNet-Version: 4.0.30319\r\n Date: Tue, 20 Mar 2012 09:44:20 GMT\r\n Content-Length: 1624\r\n

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• How to serve pages through multiple frameworks/template engines efficiently

  - by Leftium

  I would like to render a file that has both PHP tags and Web2Py tags mixed together. To do this, I would like the web server to pass the file through Web2Py, then PHP. I found a method to call PHP from Web2py via Python (based on this method for running PHP on top of django), but this method loses the benefits of any server optimizations from mod_php or FastCGI like caching and multi-threaded operation. A new process is created for each PHP request, which is very slow. Is there a better way to efficiently render pages with both Web2Py(Python) and PHP tags in the same file? Note I am not looking for methods of serving PHP-only and Web2Py-only files from the same server/domain. I prefer solutions for Apache2 or Cherokee. I'm open to using other web servers, though. Background info: I prefer to develop in Web2Py, but we have this pre-existing system written in PHP. I would like to augment the PHP system with some of Web2Py's features like auth authentication/user management and the T() internationalization object. Also it would make it much easier to port the PHP project to Web2Py if it could be done piecemeal. Since the PHP project consists of many files, it would greatly help if they did not need modification.

  Read the article

• How do I boot [embedded] linux from sd card?

  - by Brandon Yates

  I am hacking together a quick embedded linux system on a DM816x evm board. Previously I have been using TFTP and NFS to load my kernel and root filesystem to the board. I am now trying to switch over to loading everything from an SD card. I have my card partitioned such that uBoot and my kernel image are in one partition, and my rootFS in another partition. At power-on, Uboot starts correctly and successfully launches the kernel. However, the kernel is unable to mount the root file system. It appears that it doesn't recognize any SD (mmc) cards. It gives this error message. VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0) Please append a correct "root=" boot option; here are the available partitions: 1f00 256 mtdblock0 (driver?) 1f01 8 mtdblock1 (driver?) 1f02 2560 mtdblock2 (driver?) 1f03 1272 mtdblock3 (driver?) 1f04 2432 mtdblock4 (driver?) 1f05 128 mtdblock5 (driver?) 1f06 4352 mtdblock6 (driver?) 1f07 204928 mtdblock7 (driver?) 1f08 50304 mtdblock8 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) I feel like I'm missing something fundamental here. Why does it not recognize the root device I am trying to load from? Here is my uBoot boot script that is running: setenv bootargs console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw mem=124M earlyprink vram=50M ti816xfb.vram=0:16M,1:16M,2:6M ip=off noinitrd;mmc init;fatload mmc 1 0x80009000 uImage;bootm 0x80009000

  Read the article

• CHKDSK is unable to fix NTFS errors

  - by HackToHell

  After my PC shutdown due to power failure, I noticed several errors in EventViewer. The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2. and The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:. So I forced a chkdsk check at startup, and it finds a stream of error, here is the output, it is smaller than the actual log, because, Event Viewer only seems to have this much, the same line was repeated thousands of times.Here is that line. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x198f2 is already in use. Deleting corrupt attribute record (128, "") from file record segment 104690. Attribute record of type 0x80 and instance tag 0x0 is cross linked Also, even after running CHKDSK, the same errors were being reported again so I ran CHKDSK another time and it still loops the same line above, without fixing the error. Can anyone tell me how to fix it?

  Read the article

• Logstash agent doesn't run as a daemon on MAC OS X 10.9.1

  - by user329324

  I need to run the logstash agent as a Daemon on an MAC OS X System whenever the system boots up terminal: /usr/local/logstash/bin/logstash agent -f /usr/local/etc/cvlog.conf Per terminal the program is working succesfully but as an daemon it doesn't start. My com.bcd.logstash.plist <plist version="1.0"> <dict> <key>Label</key> <string>com.bcd.logstash</string> <key>KeepAlive</key> <dict> <key>SuccessfulExit</key> </false> </dict> <key>ProgramArguments</key> <array> <string>/usr/local/logstash/bin/logstash</string> <string>agent</string> <string>-f</string> <string>/usr/local/etc/cvlog.conf</string> </array> <key>RunAtLoad</key> </true> </dict> </plist> I start with: launchtl load /Library/LaunchDaemons/com.bcd.logstash.plist Syslog Error Message com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:1 com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:143 What's wrong with my plist?

  Read the article

• Why do my backup fail when I target a network share hosted by a Synology DS211 disk station?

  - by Larry

  My backups are failing when I try to use a network share hosted by a Synology DS211 disk station. They work fine if I target a different network share (i.e. \server1\data\larry). When I run the following command: Wbadmin start backup -backupTarget:\\diskstation\backup-larry -include:C: This is what I get: wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Note: The backed up data cannot be securely protected at this destination. Backups stored on a remote shared folder might be accessible by other people on the network. You should only save your backups to a location where you trust the other users who have access to the location or on a network that has additional security precautions in place. Retrieving volume information... This will back up volume WIN7(C:) to \\diskstation\backup-larry. Do you want to start the backup operation? [Y] Yes [N] No y Note: The list of volumes included for backup does not include all the volumes that contain operating system components. This backup cannot be used to perform a system recovery. However, you can recover other items if the destination media type supports it. The backup operation to \\diskstation\backup-larry is starting. Creating a shadow copy of the volumes specified for backup... Creating a shadow copy of the volumes specified for backup... The backup operation stopped before completing. Summary of the backup operation: ------------------ The backup operation stopped before completing. Detailed error: Access is denied. Windows Backup failed to write the file: '<backup location>\WindowsImageBackup\<Computer Name>\MediaId'. Access is denied. The backup creates the following path \\diskstation\backup-larry\WindowsImageBackup\LARRY-MYDOMAIN\ but its empty. I definitely have read/write access on the target directory (\diskstation\backup-larry). I have verified this by looking at the permission and by actually copying files to this location. Any suggestions?

  Read the article

• a disk read error occurred

  - by kellogs

  Hi, ¨a disk read error occurred¨ appears on screen after choosing to boot into Windows XP from GRUB. [root@localhost linux]# fdisk -lu Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x48424841 Device Boot Start End Blocks Id System /dev/sda1 63 204214271 102107104+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 204214272 255606783 25696256 af HFS / HFS+ Partition 2 does not end on cylinder boundary. /dev/sda3 255606784 276488191 10440704 c W95 FAT32 (LBA) Partition 3 does not end on cylinder boundary. /dev/sda4 276490179 312576704 18043263 5 Extended /dev/sda5 * 276490240 286709759 5109760 83 Linux /dev/sda6 286712118 310488254 11888068+ b W95 FAT32 /dev/sda7 310488318 312576704 1044193+ 82 Linux swap / Solaris sda is a 160GB hard disk with quite a few partitions and 3 OSes installed. I am able to boot into Linux and Mac OS fine, but not into Windows anymore. The Windows system is located on /dev/sda1. I can not recall how exactly have I used testdisk but it once said that ¨The harddisk /dev/sda (160GB / 149 GB) seems too small! (< 172GB / 157GB)¨ or something simillar. So far I have tried to ¨fixboot¨ and ¨chkdsk¨ from a recovery console on the affected windows partition (/dev/sda1), the plug off power cord for 15 seconds trick, reinstalling GRUB, repairing the MFT and boot sector of the affected partition via testdisk, what next please ? Thank you!

  Read the article

• Getting Apache to serve same directory with different authentication over SSL?

  - by Lasse V. Karlsen

  I have set up VisualSVN server, a Subversion server that internally uses Apache, to serve my subversion repositories. I've managed to integrate WebSVN into it as well, and just now was able to get it to serve my repositories through WebSVN without having to authenticate, ie. no username or password prompt comes up. This is good. However, with this set up there is apparently no way for me to authenticate to WebSVN at all, which means all my private repositories are now invisible as far as WebSVN goes. I noticed there is a "Listen 81" directive in the .conf file, since I'm running the server on port 81 instead of 80, so I was wondering if I could set up a https:// connection to a different port, that did require authentication? The reason I need access to my private repositories is that I have linked my bug tracking system to the subversion repositories, so if I click a link in the bug tracking system, it will take me to diffs for the relevant files in WebSVN, and some products are in private repositories. Here's my Location section for WebSVN: <Location /websvn/> Options FollowSymLinks SVNListParentPath on SVNParentPath "C:/Repositories/" SVNPathAuthz on AuthName "Subversion Repository" AuthType Basic AuthBasicProvider file AuthUserFile "C:/Repositories/htpasswd" AuthzSVNAccessFile "C:/Repositories/authz" Satisfy Any Require valid-user </Location> Is there any way I can set up a separate section for a different port, say 8100, that does not have the Satisfy Any directive there, which is what enable anonymous access. Note that a different sub-directory on the server is acceptable as well, so /websvn_secure/, if I can make a location section for that and effectively serve the same content only without the Satisfy Any directive, that'd be good too.

  Read the article

• Distributed File Systems.

  - by GruffTech

  So, I've been reading several articles around ServerFault as well as google. (For Example, this link) My Requirements are very similar to the link above, however i'd like to also have dynamic or at least resizeable file volumes, so if necessary i can add 4-5 servers to the pool, and then expand the volume. Any Distributed File systems that support that, to save me some time? Thanks! LustreFS will be my next test cluster to build. GlusterFS I've build a 3-machine test GlusterFS cluster, However i quickly became aware of several of its limitations that it doesn't seem to make clearly public. One, i can't seem to resize a volume. Once a volume is created, its done. Which seems retarded, why have a fully scalable file system if i can't scale a volume? So maybe i'm doing something wrong. I'm not sure. AmazonS3 while gives the cheapest startup adds too much cost when broken down to per client per month, so its out. Building my own system when prorated over several years with no bandwidth costs makes it significantly cheaper. MogileFS isn't an option as we'd like this server to be a SAN-Replacement, for storing tons of media from a multitude of systems, which for us means it needs to be POSIX compliant so it can be remotely mounted via NFS or CIFS.

  Read the article

• 2560 x 1600 screen resolution not available when a second monitor is attached.

  - by sgmoore

  I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

  Read the article

• Java web app deployment and ControlTier adoption

  - by Ran

  I've been searching for a configuration and deployment manager tool for my java-linux based web service and have been looking mainly at ControlTier (http://controltier.org). We operate at a medium scale (100's of hosts, multi-DC, dozens of services). There seem to be be plenty of lower level system admin tools such as chef, puppet, cfengine, bcfg2 and more and my understanding and the reason I'm calling them "low level" is that they are great for system level administration tasks such as setting up a mount, file permissions, users etc but aren't designed, for example for java deployments, which usually come with a build process and special java semantics. In many cases any tool can be used to do anything but if it was not designed for the task it can get uncomfortable. OTOH control-tier seem to have been designed just for that - java application deployments, at least that's what all the tutorials on their site demonstrate but here's the problem - The wiki at http://controltier.org/wiki/ is pretty good and stuffed with examples and the company behind the open source CT product is very responsive (pushy...) however, I'm yet to have seen any material from 3rd party users on the net. No success stories, no detailed blog posts, no best practices, no cheat sheets, not even hate letters, nothing. This plays badly for DTO solutions, CT's sponsor for two reasons, one is that it makes me suspicious what's the reason for the poor adoption? and second, what do I do if I get stuck and there's no help page on CT's wiki page and the mailing list is too slow to answer. I'm stuck with a "free" product that a consultancy company is pushing. So my question here - I'd be interested in hearing if anyone has had real world experience with CT for java based web app deployments and if he'd thumb up the product? Any other comments that may enlighten me are welcome of course...

  Read the article

• User authentication -- username mismatch in IIS in ASP.NET application

  - by Cory Larson

  Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

  Read the article

• Postfix unable to find local server

  - by Andrew

  I'm working with postfix on fedora 9 and I'm attempting to make some changes to a system setup by my predecessor. Currently the postfix server on [mail.ourdomain.com] is setup to forward mail sent to two addresses to another server for processing. The other server [www01.ourdomain.com] receives the email and sends it to a PHP script to be processed. Then that PHP script generates and sends a response to the user who sent the original email. We're adding more web servers to the system and as a result we've decided to move these processing scripts to our admin [admin.ourdomain.com] server to make them easier to keep track of. I've already setup and tested the processing scripts on [admin.ourdomain.com], and on the mail server doing the forwarding [mail.ourdomain.com] I added [admin.ourdomain.com] to /etc/hosts and also added another, aside from the one for [www01.ourdomain.com], entry to /etc/postfix/transport for [admin.ourdomain.com]. I also restarted postfix as well. I've tested the communication from [mail.ourdomain.com] to [admin.ourdomain.com] using telnet and the [admin.ourdomain.com] domain and everything runs correctly. But as soon as I change the forward address and attempt to send an email to the mail server I get a bounce message stating "Host or domain name not found. Name service error for name=admin.ourdomain.com type=A: Host not found". If I change the forward settings back to [www01.ourdomain.com] then everything works fine. Is there some setting I'm missing in Postfix? The server itself and telnet work fine it just seems to be postfix that's not able to discover the location of [admin.ourdomain.com].

  Read the article

< Previous Page | 809 810 811 812 813 814 815 816 817 818 819 820  | Next Page >