Search Results

Search found 24958 results on 999 pages for 'select region'.

Page 818/999 | < Previous Page | 814 815 816 817 818 819 820 821 822 823 824 825  | Next Page >

• Adding 2nd DC to the domain from a different subnet over VPN.

  - by EagerToLearn

  I'm in the process of adding a second DC to our domain and just want to make sure I have all the steps right before proceeding. Info: DC1 is 2008 R2 Standard. DC2 is 2008 R2 Standard. Network1 is 192.168.39.x/24 Network2 is 10.0.0.x/24 VPN is Sonicwall. The 2 DC's will be at two different sites, but the networks are connected by hardware VPN. (Sonicwall). The main DC server will be on the 192.168.39.0/24 network. The 2nd DC will be on 10.0.0.0/24. Here are the steps I plan to take; please let me know if I'm missing anything. Part 1: AD Sites and Services on DC1, create a new site and subnet for DC2. (Or should I create a new one for both?) (Can I use the default IPSiteLink and not change anything in there other than refresh timer?) Part 2: Point the DNS of DC2 to DC1. Run /forestprep and /domainprep (on both, or just DC1?). Dcpromo and select "Additional Domain Controller for Existing Domain". Then continue with normal steps with default locations for databases. EDIT: Didn't realize this was like reddit and required two skipped lines to skip one :P EDIT 2: When DCPromo-ing DC2, do I need to have "Append primary and connection specific DNS" and "Append parent suffixes of the primary DNS suffix" checked?

  Read the article

• Can't access WordPress blog after host changed IP address of server

  - by John

  My host changed servers and all websites now have a new IP address. I have the same domain name and I assume the host runs the same nameservers, though my host and domain name provider are different. Notes: I never entered a Name or description under General/Settings for my blog. I left them both blank. That is when I could log into it. The wp-config file, has localhost entered rather than a specific IP. Again this has always been the case and my host never advised otherwise. I can get into cPanel by simply putting the newly advised IP in front of /Cpanel. However, I can not reach the admin panel of my WordPress blog (version 2.8.2). I had been loggin into it via http://xx.xx.xxx.xx/~example/blog/wp-login.php. My host suggested to simply insert the new IP in place of the old one. I still get the error message: 404 Not Found The server can not find the requested page: Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.12 Server at 74.50.108.14 Port 80 I followed some tips on a question on Stack Overflow of a similar nature. I have logged into phpMyAdmin and found the wp-options table and searched for SELECT * FROM `wp_options` WHERE `option_name` IN ('siteurl', 'home') Only option ID 39 came up and the results are: Home has optionvalue http://example.org siteurl has optionvalue http://example.org/blog Both of which appear correct. Is there any part of the MySQL tables where I can change an actual IP address? Or is there something else you can advise?

  Read the article

• No password is complex enough

  - by Blue Warrior NFB

  I have one user in my AD domain who seems to not be able to self-select a password. I may have another one, but they're on a different enough password-expiration schedule that I can't remember who it is right now. I can set a password via ADU&C just fine, but when he tries it via C-A-D he gets the "doesn't meet complexity" message. Figuring he was just doing something like 'pAssword32', I did some troubleshooting of my own and sure enough it doesn't want to take a password that way. He's one of our users that habitually uses a local account and then maps drives using his AD credentials so he doesn't get the your password will expire in 4 days, maybe you should change it prompts, so he's a frequent "my password expired, can you fix it" flyer. I don't want to keep having him set it via ADU&C over my shoulder every N days. I'm just fine setting temp passwords of 48 characters of keyboard-slamming and letting him change it something memorable. My environment is at the Windows 2008 R2 functional level, and I am using fine-grained password policies. In fact, I have two such policies: For normal users (minimum length, remembered passwords) For special utility accounts The password complexities I've tried match both policies for length and char-set selection. The permissions on the User object themselves look normal, SELF does indeed have the "Change Password" right. Is there some other place I should be looking for things that can affect this?

  Read the article

• Acrobat 9 Pro - shortcut key failure

  - by Rick G

  I create numerous Acrobat PDF files from MS Word documents via Acrobat 9 Pro. I often need to print a single page from an Acrobat PDF file. I normally use the keyboard shortcut Control-P (Print Dialog) and ALT-U (current page). I recently set up a new PC with Windows 7, and this shortcut combination does not work. When I press ALT-U, it moves the highlight to the correct item, but does not select the radio button. If I press the Enter key, then I print the entire document instead of the current page - VERY annoying! It looks like there is an error in the design of the Print dialog for Acrobat. There are two items which have ALT-U as the keyboard shortcut. They are "Current page" in the Print range frame, and "Summarize comments". I have been able to use Control-P (Print Dialog) and ALT-U (current page) with no problems on virtual machines and older computers running Windows XP. Maybe I installed some software on the new PC that is messing up the keyboard shortcut. Is there any way to figure out the culprit - or is this a known problem with Acrobat?

  Read the article

• Effects of internet connection speeds on server queries

  - by SephMerah

  Can my internet connection significantly effect queries run on phpmyadmin? I am currently 18 down and 30 up. I switched internet connections today and noticed a deep drop in query performance. The query that I am running is SELECT * FROM table. Simple. The table has one row of data. The MySQL server is on the same server as everything else. It is a VPS. Godaddy hosts. I dont have any other information. Centos 6.3 MySQL 5.1 PhpMyAdmin 3.4 Okay used google tools to inspect the XHR going out and coming in and this is what it reported. {"success":true,"message":"<div class=\"success\">Your SQL query has been executed successfully ( Query took 0.0033 sec )<\/div>","sql_query":"<div id=\"result_query\" align=\"\">\n<div class=\"success\">Your SQL query has been executed successfully ( Query took 0.0033 sec ) SNIP..................."}. So apparently my server is fine. The strange thing is though.. The returned XHR comes back exactly as soon as I execute the query on the page. It comes back within less than a second. Why PhpMyadmin does not report the change immediately. I am going to try a re-install.

  Read the article

• MySQL based authentication with crypt()ed password fails in Apache 2.2

  - by Fester Bestertester

  I'm trying to set up a simple CalDAV/CardDAV server with a Radicale backend and an Apache 2.2 frontend. So far, it's all nice and simple, but I can't get the MySQL based authentication to work. I'd like to authenticate users against an existing MySQL database, and I need the REMOTE_USER variable to be set (pretty much like in the configuration examples for Radicale). I've tried mod_auth_mysql, which authenticated the users nicely, but failed to set the REMOTE_USER variable. The newer alternative seems to be mod_authn_dbd, which doesn't seem to like the crypted passwords in the MySQL database. According to the documentation, crypted passwords should work, so maybe I'm just missing a simple parameter. The configuration looks like this: DBDriver mysql DBDParams "sock=/var/run/mysqld/mysqld.sock dbname=myAuthDB user=myAuthUser pass=myAuthPW <Directory /> AllowOverride None Order allow,deny allow from all AuthName 'CalDav' AuthType Basic AuthBasicProvider dbd require valid-user AuthDBDUserPWQuery "SELECT crypt FROM myAuthTable WHERE id=%s" </Directory> I've tested the query, it works fine. And as mentioned before, mod_auth_mysql worked nicely against the same database, but didn't set the required variables. Am I just missing some configuration parameter? Or is mod_authn_dbd just not the right tool to achieve what I want?

  Read the article

• Creating security permissions for a non-domain-member user in Windows Server 2008

  - by Overhed

  Hello everyone, I apologize in advance for incorrect use of terminology, as I'm not an IT person by trade. I'm doing some remote work via a VPN for a client and I need to add some DCOM Service security permissions for my remote user. Even though I'm on the VPN, the request for access to the DCOM service is using my PCs native user (and since I'm running Vista Home Premium it looks something like: PC-NAME\Username). The request for access comes back with access denied and I can not add this user to the security permissions as it "is not from a domain listed in the Select Location dialog box, and is therefore not valid". I'm pretty stuck and have no clue what kind of steps I need to do here. Any help would be appreciated, thanks in advance. EDIT: I have no control over what credentials are being passed in to the server by my computer. This scenario is occurring in an installation wizard that has a section which requests you point it to the machine running the "server" version of the software I'm installing (it then tries to invoke the relevant COM service, but my user does not have "Remove Activation Permissions" on that service, so I get request denied).

  Read the article

• Extremely Weird Computer Problem

  - by waiwai933

  Well, having worked with computers a long time, I thought I had seen everything that could go wrong with a computer. Today, I learned that I was wrong. My Mac has been behaving extremely weirdly. While the keyboard is fine, the mouse holds extremely weird behavior. It will open apps from the Dock, but not open documents from a Stack. The top menu bar will work, but only after I restart Finder. I am unable to close most windows, except with Cmd+Q. Clicking on a link in Safari, for some reason, opens it in a new tab. I can not select checkboxes, but I know a click is going through because you can see a quick indent in the check box, before it reverts to the unchecked state. I've restarted my computer, as well. I don't see a virus when looking through top, but I guess it could be subverting top. Does anyone have an idea what is going on?

  Read the article

• How can I make grub2 boot into Windows 7?

  - by Grzenio

  I had Windows 7 installed on my system, then I installed Debian testing with grub2 as its boot manager. Initially I couldn't see windows entry in grub at all, so I ran: aptitude install os-prober kcpuload update-grub Now I can see the entry, but when I select it I get only Win7 system restore, instead of the the real thing. Any ides how to make it work? EDIT: I tried the suggested approach to add a new file to /etc/grub.d, which generated an entry in grub.cfg, but it does not appear in the grub menu on boot :( I have this: grzes:/home/ga# cat /etc/grub.d/11_Windows #! /bin/sh -e echo Adding Windows >&2 cat << EOF menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And I have the following grub.cfg file: grzes:/home/ga# cat /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } insmod ext2 set root=(hd0,3) search --no-floppy --fs-uuid --set 6ce3ff31-0ef7-41df-a6f5-b6b886db3a94 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi set locale_dir=/boot/grub/locale set lang=en insmod gettext set timeout=5 ### END /etc/grub.d/00_header ###

  Read the article

• Why do I need a managed switch and which one should I buy?

  - by ascanio1

  I bought a 2nd router and I want both routers to have direct WAN access to the modem. One of the 2 routers directs VOIP traffic to a telephone line port. This VOIP service is provided by the cable carrier which also leases the modem & the router. The cable company technician told me that this VOIP line uses IPv6 addressing and therefore I must employ an IPv6 capable/compliant Giga Hub/Switch or my telephone line won't work anymore. Pls advise me (brand/model) an IPv6 compliant, 2 port, switch to purchase. Pls educate me: By reading this forum I thought that hubs broadcast traffic to all ports, regardless of which input/output is being used and so, theoretically, they have nothing to do with IP. Correct? Same story for unmanaged switches, where the only difference is that these latter devices route traffic only to those ports which are detected to be in use. Correct? I also understood that unmanaged switches route traffic simply by detecting hardware use and not by selecting specific IP traffic. Correct? Finally, there are managed switches which DO select traffic based on IP and, therefore, only these managed switches are involved with IPv6... Why would my cable company explicitly tell me, over and over, that I must use an IPv6 compliant switch? Why would they need a managed switch instead of an unmanaged one? Thanks in advance for helping me understand!

  Read the article

• Improve wireless performance

  - by djechelon

  Hello, I have a Trust Speedshare Turbo Pro router, which is running on channel 6. I found that the wireless signal (and network performance) dramatically drops from my PDA (I can barely attach to the network, even if I set the PDA's energy settings to maximum wireless performance) when I even exit my room, and I don't have shielded walls or something like that. I can't even stream a SD video from my desktop (connected via LAN) to my laptop using WiFi, while via LAN it works fine. I read that changing router's channel could improve performance due to interference reducing. I found that almost all wireless networks around here run on channels 6 and 11. I tried to go to my router's settings page to change channel, but I found that the combo box only allows me to select 6!! I'm not sure, but I may have been able in the past to change channel, though not to all of the available channels. A few minutes ago I tried a firmware upgrade, but it didn't solve my problem. My question is Is it possible that my router is someway locked to its channel? I bought it on my own, I didn't receive it from my ISP Apart from boosting the antenna power to the maximum (which, by the way, increases the EM radiation my and my family's bodies absorb 24/7 and is little more environment-unfriendly), do you have any tips on getting high quality transmission up to 5 metres from the antenna? Thank you

  Read the article

• Only tunnel certain applications via OpenVPN

  - by jinjin

  Hi, I've purchased a VPN solution, it works correctly when I have "redirect-gateway def1" in the configuration file (routing all traffic through the VPN). However when I remove that line from the configuration file, I am still able to ping-out of the machine (ping -I tap0), however I cannot ping the IP assigned to the machine (it's a public ip), i get the error: Destination Host Unreachable. I only want to have certain applications sending traffic through the VPN tunnel (eg: ZNC, irssi), all of which i can select which IP they use. However they can't recieve any data, making the tunnel essentially useless to me when disabling redirect-gateway. Any ideas on how to allow specific applications use the tunnel, without of forcing everything to go through it? My configuration file is as follows: dev tap remote #.#.#.# float #.#.#.# port 5129 comp-lzo ifconfig #.#.#.# 255.255.255.128 route-gateway #.#.#.# #redirect-gateway def1 secret key.txt cipher AES-128-CBC The output of ifconfig -a when the tunnel is connected: tap0 Link encap:Ethernet HWaddr 00:ff:47:d3:6d:f3 inet addr:#.#.#.# Bcast:#.#.#.# Mask:255.255.255.255 inet6 addr: <snip> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:612 errors:0 dropped:0 overruns:0 frame:0 TX packets:35 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:25704 (25.1 KiB) TX bytes:6427 (6.2 KiB) EDIT: the Bcast:#.#.#.# (ifconfig) is different from route-gateway #.#.#.# (openvpn) if that makes any difference.

  Read the article

• Dialog box tells me there's a missing driver when installing 64-bit version of Windows 7

  - by Eikern

  I'm trying to install Windows 7 64-bit on my computer (ASUS P6T Deluxe V2, one 80GB HDD and two 1 TB HDDs). When I'm supposed to select whether I want to Upgrade or do a Custom install, I get a dialog box telling me: Load Driver A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step. I've tried to reach this step using a 32-bit installation disc, but that doesn't generate this message at all. Through the command windows (shift-F10) I can reach all of my drives, including my optical drive, without any problems--so what kind of device driver is it the installation wants? I've tried all the obvious drivers on the CD that followed my motherboard, but I can't seem to find the right one. The problem is that I don't know what device I'm supposed to load the drivers for in the first place. Can anyone help me? Edit: It turned out that my downloaded image was corrupted. I borrowed a DVD from a friend of mine, which worked!

  Read the article

• Debian Wheezy 7.5 64bit xfce4 install error ( no desktop environment installed already )

  - by GeoMind

  i wrote a CD with an iso-image from debian.org. the debian-7.5.0-amd64-CD-1.iso from this folder. Debian Wheezy 7.5 stable 64bit There was an error at Select and install software step. It said Retrieving file 770 from 800 and then it failed the installation. I continued the instal and when i opened the computer it doesn't work the Ctrl + Alt + F7 as i waited. It starts at tty1 and after logging in i edited config file cause it had a lot of errors and said E: Unable to correct problems, you have held broken packages or Couldn't found the package. FILE: /etc/apt/sources.list # deb cdrom:[Debian GNU/Linux 7.5.0 _Wheezy_ - Official amd64 CD Binary-1 20140426-13:37]/ wheezy main #deb cdrom:[Debian GNU/Linux 7.5.0 _Wheezy_ - Official amd64 CD Binary-1 20140426-13:37]/ wheezy main deb http://security.debian.org/ wheezy/updates main contrib non-free deb-src http://security.debian.org/ wheezy/updates main contrib non-free deb http://ftp.us.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.us.debian.org/debian/ squeeze main contrib non-free After that i tried to install xfce4 as desktop environment. Guide found at Linux Panda But it print at terminal: What i sould do? How i can fix this problem?

  Read the article

• GtkView GtkSpell and myspell backend

  - by justadreamer

  Hi I have an IM client pidgin. It is launched under locale ru_RU.UTF-8 Then when I type messages in GtkView widget it highlights the misspelled words. However it uses a GtkSpell which uses enchant, which uses myspell backend (I provided it with symlink to openoffice dictionaries folder /usr/share/enchant/myspell -- /usr/share/myspell/dict). Now the problem is that whichever language I use - it still uses ru_RU language to select the dictionary, so all english text is being underlined as a misspelled text. When I switch locale to en_US and then launch pidgin under it - then all russian text becomes misspelled. I don't like this behaviour as I use pidgin to chat in both languages. Is there a way to somehow setup enchant/myspell so that it searches in both dictionaries en_US and ru_RU independent of the locale I launched pidgin (GtkView) in ? I have Debian lenny/5.0.1 distro. enchant version 1.5.0. /usr/share/enchant/enchant.ordering looks like this: *:myspell meaning that for all languages backend is myspell myspell dictionary.lst file looks like this: DICT en GB en_GB DICT en US en_US THES en US th_en_US_v2 THES en GB th_en_US_v2 THES ru RU th_ru_RU_v2 DICT ru RU ru_RU DICT uk UA uk DICT ru RU en_US

  Read the article

• Custom Dreamweaver DocTypes

  - by Hugh Guiney

  Dreamweaver CS5 with Dreamweaver HTML5 Pack 1.2.7 Windows 7 x64 When I go to create a new document and select the HTML5 DocType, Dreamweaver gives me the legacy encoding/character set declaration: <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> I want to replace it with the new, abbreviated style: <meta charset="utf-8"> The relevant file seems to be %ProgramFiles(x86)%\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\NewDocuments\Default.html, which has a blank charset, that is then apparently replaced with the appropriate character set dynamically: <meta http-equiv="Content-Type" content="text/html; charset="> I changed it, but then new documents show up like this: <meta charset=""> <title>Untitled Document</title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> It seems Dreamweaver added the legacy declaration back in after my modification—and as far as I can tell, there's no way to specify that the charset definition should go in-between the quotes, either. Additionally, any modifications to Default.html apply to every DocType, whereas I only want this change to apply to the HTML5 DocType. Is there anything in the configuration files that would allow me to make any of these customizations? If not, is there an extension that does it?

  Read the article

• Formatting pwd/ls for use with scp

  - by eumiro

  I have two terminal windows with bash. One is local on the client computer, another one has an SSH-session on the server. On the server, I am in a directory and seeing a file I would like to copy to my client using scp from the client. On the server I see: user@server:/path$ ls filename filename I can now type scp in the client shell, select and copy the user@server:/path from the server shell and paste to the client shell, then type slash and copy and paste the filename and append a dot to get: user@client:~$ scp user@server:/path/filename . to scp a file from the server to the client. Now I am searching for a command on the server, that would work like this: user@server:/path$ special_ls filename user@server:/path/filename which would give me the complete scp-ready string to copy&paste to the client shell. Something in the form echo $USER@$HOSTNAME:${pwd}/$filename working with relative/absolute paths. Is there any such command/switch combination or do I have to hack it myself? Thank you very much.

  Read the article

• Two VGA monitors on Lenovo IdeaCentre H520 Desktop

  - by Sebastian-Laurentiu Plesciuc

  I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

  Read the article

• SQL Server Installation: Is it 32 or 64 bit?

  - by CapBBeard

  Hi, Recently I was performing an OS upgrade on one of our DB servers, moving from Server 2003 to Server 2008. The DBMS is SQL Server 2005. While reinstalling SQL on the new Windows installation, I went to another of our DB servers to verify a couple of settings. Now, I always thought this second server was Server 2003 x64 + SQL 2005 x64 (from what I'd been told), but I now have my doubts about this. I now suspect that it is in fact only 32 bit SQL, however I'd like to verify this. Here's some details: The OS is definitely 64 bit. xp_msver shows Platform as NT INTEL X86 SELECT @@VERSION shows Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86)... However sqlservr.exe is not shown with '* 32' in taskmgr, does anyone know why this is the case, if it is in fact 32 bit as claimed? Despite this, it does seem to be running out of the x86 program files folder. If I do the same checks on a confirmed 64 bit installation, it does give back the expected 64 bit readings, which can only prove that this server in question is only running in 32 bit. Now, that being the case, the question arises about how much memory this '32 bit' install can use. Task manager reports about 3.5GB memory usage for sqlservr.exe (The server has 16GB physical). I suspect that AWE has not been configured at all, and therefore the server will be significantly under-utilised (remembering that the OS is 64 bit) if SQL is simply using a 32bit address space. Is this assumption correct? I feel the server should have SQL reinstalled as 64 bit in order to fully utilise the hardware platform, however it is currently heavily in production; this will be no easy task. I suspect we may just have to configure AWE correctly and let it be for the time being (Unless this is a bad idea?). I apologise that this question is a little vague/lost; I'm no SQL expert, just trying to get a handle on what's going on here.

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• Good process/software for organizing photos past/present

  - by Matthew

  So I have tons of photos taken all the time. I have a lot from years past that I never went through (meaning deleting duplicates, etc). I've got a new pc with windows 7, and I'm wondering what a good process is to organize those photos. They're in folders that have really no meaning (it used to be people would put them in a folder wherever, even the desktop or somewhere else, not just the My Pictures folder). I'm going to keep all pictures in the "My Pictures" folder from now on. I've used Picasa from g=Google, and it works great. Is this the recommended free software for this? What process do I use to move the old pictures over in to new "organized" folders? Lately in Picasa when I import off my camera card, I would just select something that names the folder after the date it was taken. Is this advised? Just give me ideas on how to stay organized with photos. Should I tag them also? Should I rename the file names? Keep in mind I have over 16,000 photos I'll have to go through, so it can't be anything to thorough.

  Read the article

• Second monitor stopped being recognized by Windows

  - by Eric J.

  One of the developer PC's running Windows Vista Ultimate had the second monitor stop being recognized in Windows overnight. There were no hardware or driver changes at the time, though I have subsequently updated to the latest nVidia drivers (card is NVIDIA GeForce 210). The non-recognized monitor IS recognized during the boot sequence. In fact, only the "bad" one shows the POST or the Windows loading screen. At some point during Windows initialization after the loading screen disappears and before the logon screen appears, the active monitor switches. Any thoughts? UPDATE: When I open the Vista monitor properties window, I see my primary display and secondary display depicted. The primary one is portrayed as the regular blue box, but the secondary one is portrayed greyed-out. I have the option to "Extend desktop to this monitor", the only resolution is 800x600, and all of the advanced monitor properties are greyed out as well. If I opt to extend the desktop, the greyed-out box turns blue, when I then select Apply the screens flash as usual and I'm given the 15 second countdown to accept the new settings and when I do, everything returns to the previously broken state... secondary monitor is portrayed greyed-out again. At no point is the desktop shown on the secondary monitor.

  Read the article

• Contacts in Outlook 2003/2007, some questions

  - by Ernst

  If I create a distribution list and then select members, can I see different fields than the default ones? In 2007 there are radio buttons for 'name only' and 'more columns', but the latter does seem to only result in no results at all, regardless of which address book I choose. In 2003 there is no such thing. Is there a plug in that will break up the recipients (whether they be to, cc, or bcc) in groups of X, and send then a number of mails as required? Our host allows only 50 recipients per mail and only 300 total recipients per 5 minutes. I know the email client blat has exactly this functionality, but it does not seem to be able to connect to the exchange server to get the contacts needed. Could I maybe set outlook to send to blat which then does the breaking up as necessary? Can I (or is there a plug in for this) export only part of the contacts instead of all of them? Note that we send mail outside our organisation via our web host where we've got a few mailboxes, and we use our exchange (2000) server only internally, the few people that can send email to the outside world have an external mailbox as well as their exchange account defined. I might be able to convince our general boss that we can simply give (some) people the ability to send outside via exchange, but I might just as well not succeed. Alternatively, is there another program that can connect to exchange to get the contacts (selected based on categories) and then send via smtp in groups with delays between the mails?

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• VirtualBox doesn't see raw partitions

  - by smbear

  What I want to achieve is to set up virtual machine with VirtualBox. Host OS is Windows 7 Home Premium, guest will be (k)Ubuntu 12.04 on a raw partition. The first problem is that when I issue following command: VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive0 I get following result: Number Type StartCHS EndCHS Size (MiB) Start (Sect) 1 0xee 0 /0 /1 1023/254/63 715404 1 I'm guessing that VirtualBox is unable to see my partitions. If I use diskpart tool, then all partitions are listed correctly (note Polish language version of Windows): DISKPART> select disk 0 Obecnie wybranym dyskiem jest dysk 0. DISKPART> list partition Partycja ### Typ Rozmiar Przesuniecie ------------- ---------------- ------- ------------ Partycja 1 System 200 MB 1024 KB Partycja 2 Zarezerwowany 128 MB 201 MB Partycja 3 Podstawowy 139 GB 329 MB Partycja 5 Nieznany 4883 KB 140 GB Partycja 6 Podstawowy 50 GB 140 GB Partycja 7 Podstawowy 484 GB 190 GB Partycja 4 Odzyskiwanie 24 GB 674 GB Additional note: my PC is using EFI to boot OS. Basing on the results listed above, I believe that: I messed up with my partition table. Something is wrong with VirtualBox. Can anyone help with this issue?

  Read the article

< Previous Page | 814 815 816 817 818 819 820 821 822 823 824 825  | Next Page >