Search Results

Search found 3461 results on 139 pages for 'drives'.

Page 82/139 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Ultrium 3 tape drive shoe-shining, 3Mb/s: and it's not the cable

  - by mowsala

  I have a HP 960 Ultrium 3 tape drive. Since I got it, (second hand, £90) I've been experiencing shoe-shining. Writing with tar in Linux, I average about 3Mb/s write speed. I've tried replacing both the SCSI card and the cable now, both of which made no difference at all. A curiuos observation I have made is that the write rate is not consistent. Sometimes it will write for over a minute without shoeshining, but more often, just a few seconds. I've also tried several tapes, different source drives, and even writing from Windows Backup, to no avail.

  Read the article

• Configure Mouse Buttons for "Administrator"/Elevated privileges

  - by Zhaph - Ben Duguid

  I am, for better or worse, an administrator on my Windows 7 machine. However, even then, I still need to run certain programs "as Administrator" - for example, Visual Studio 2008 when working with local IIS sites. I also like to have the extra buttons on my IntelliMouse Optical doing non-standard things, like representing Ctrl and Shift. However, when in VS running as administrator, these settings aren't picked up, just like my mapped drives aren't picked up - I would understand this if I was logging in as a different user, supplying credentials, etc, but I'm not, I'm just pressing "Yes" at the UAC prompt. Normally, I'd just right click the item in the start menu and select "Run as administrator", but that's not an option on the context menu for either the Microsoft IntelliPoint Mouse application that appears under "Programs", nor the "Mouse" control panel item. Running the control panel as administrator also doesn't seem to help. So has any one got any suggestions on how I can configure my mouse buttons for the elevated version of me that Visual Studio is running as?

  Read the article

• Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux?

  - by Don MacAskill

  We use RAID1+0 with md on Linux (currently 2.6.37) to create an md device, then use LVM to provide volume management on top of the device, and then use ext4 as our filesystem on the LVM volume groups. With SSDs as the drives, we'd like to see the TRIM commands propagate through the layers (ext4 - LVM - md - SSD) to the devices. It looks like recent 2.6.3x kernels have had a lot of new SSD-related TRIM support added, including lots more coverage of Device Mapper scenarios, but we still can't seem to get it to cascade down properly. Is this possible yet? If so, how? If not, is any progress being made?

  Read the article

• Anyone know of a good way to sell used servers?

  - by RandyMorris

  We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

  Read the article

• Recovered all previous data of partition in Windows

  - by Komal Sorathiya

  My whole drive data is lost because I installed ubuntu. After that, I formatted my Laptop and make new drives. in which, one partition is cant accessible because its a raw partition. I recovered some data from that partition using iCare Recovery Software. Then, I fully format that partition, and I put data in that place. I remove all files from that. My problem is that I want to recover my data which is deleted because of ubuntu.. I can recover the most recent data from iCare Recovery, but i cannot recover previous data.. Please, help me for that. I am trying this from many days. Thanks

  Read the article

• What would happen in a Software Raid 1 of one HDD and one SSD?

  - by Adrian Grigore

  Hi, I'm running my Windows 7 installation and all of my apps from an SSD for performance reasons. Since SSD's can instantly die at any moment, I'm looking for some kind of data backup strategy. Right Now I regularly backing up the drive image on a hard disk, but that only happens once per day, which is not enough for my taste. So I got an idea: What if I created a software raid 1 of the SSD and partition on my Hard disk? All data would be mirrored on both drives, making this a lot safer. But what about performance? Will Windows 7 detect that the SSD is faster than the hard drive and always read from the SSD? Or will it randomly read from both, thus reducing read performance? Thanks, Adrian Edit: I just found this article which basically answers my question. Feel free to close this post.

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Burning a Custom CD/DVD software Image

  - by Iceking007

  Hello I am trying to Burn a disk let me catch you up where I am at as I have a very SPECIFIC question and it may be difficult to explain but I will try to keep it simple: I have software already in an ISO file; I am using Daemon tools on a Windows based PC What I am wanting to do is create the actual Picture (not disk image file) that will show up on the Disk drive when I insert the disk Eg: if you put microsoft Office 11 in your comp. you open up My Computer to view all your HD and Disk drives you will see the image that microsoft put on the disk which is a silver CD and the Microsoft Office logo on the top corner. I would like to know how to edit my current ISO file or what I need to do in order to put "A PICTURE" or "AN ICON FILE" on the CD/DVD so that when I insert the disk into any PC it will show up with the PICTURE OR ICON file I chose and look proffessional. Thank you for your time

  Read the article

• Can I use a wireless-N laptop as an NAS for seamless and fast data transfer and access?

  - by techaddict

  I have a nice spare laptop (Dell 15R, one year old) that I was wondering if I could use as an NAS. The laptop has an E-Sata port, and I was wondering if I could set it up and plug in a few hard drives permanently (meaning I won't be unplugging it) to the eSata port and use the laptop as a wireless NAS to seamlessly and wirelessly store and access my files. To see more about what I'm looking for in the NAS to see if it's possible to use my other laptop for this purpose, see my other question: Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds? Alternatively, would it be better to sell the laptop and buy a dedicated NAS?

  Read the article

• Can I trust that ZFS is consistent between Linux and FreeBSD?

  - by iconoclast

  I'm planning to build a FreeNAS box sometime soon, but if ZFS on Linux eventually proves to be reliable, I might want to switch, just to have a more familiar OS. So I'm wondering if I can trust that the different implementations of ZFS are compatible. In other words, if I just swap out the boot disk from FreeNAS to Linux or OpenIndiana, can I trust that nothing bad will happen to my data? This may seem like a stupid question--obviously it ought to be compatible--but I'm guessing that ZFS isn't commonly used in cases where drives are moved between computers, so I'm hoping someone can provide a better answer than just "it ought to be".

  Read the article

• How to grow from single server setup

  - by Jenkz

  I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

  Read the article

• How to grow from single server setup

  - by Jenkz

  I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

  Read the article

• Installing Windows 7 destroyed my dual boot setup

  - by ped

  I have a laptop on which I have two drives with separate Windows XP installs, one barebones for music production, the other "normal" Windows XP with Office etc. (unfortunately the bios won't give a boot disk choice). Normally I would be presented with two Windows XPs on booting. Selecting the second one would get me into the "normal" installation on disk 1 (C:). Selecting the first in boot order would give me D:\ (disk 2) with the barebones XP. However, I installed Windows 7 Home onto disk 1 (C:), but there were no dual boot options anymore, even though I installed DualBoot Pro and added Windows XP disk D:. The options now show up, but selecting Windows XP just turns into a reboot back to where I started.

  Read the article

• Performance Alert Writing to event Log but not running program

  - by TooFat

  I followed the instructions here How to create and configure performance alerts in Windows Server 2003 to set up an alert if the available logical disk space on one of my drives goes below a certain number. I selected the option to write to the application event log and select the "run this program" option and put in the path to a script that sends me an email. If I copy the path to the script and run it everything works and I get the email. When I start the alert I can see that the limit I set is being exceeded and the logs are being written to the application log, but the email is never being sent. I have the runas user and pword set to a Domain Admin. If I make the "run this program path" to C:\Windows\System32\calc.exe" it also doesn't start up the calculator. The Performance Logs and alerts services is running as Local Admin with allow to interact with desktop. What am I doing wrong?

  Read the article

• Proper use of disk to disk to tape backup using de-duplication and LTO5

  - by Michael

  I currently have ~12TB of data for a full disk to tape (LTO3) backup. Needless to say, it's now requiring over 16 tapes so I'm looking at other solutions. Here is what I've come up with. I'd like to hear the community's thoughts. Server for Disk-to-Disk BackupExec 2010 Using De-duplication Technology 20+TB worth of SATA drives LTO5 robotic library connected via SAS 1Gbps NIC connected to network What I envision is doing a full backup of my entire network which will initially take a long time over the 1Gbps NIC but once the de-duplication kicks in backups should be quick. I will then use the LTO5 to make disk to tape backups and archive those accordingly. What does everyone think? Any faster way of doing the initial full backup over the 1Gbps NIC? What will be my pain points? Is there a better way of doing what I'm trying to achieve?

  Read the article

• Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux?

  - by Don MacAskill

  We use RAID1+0 with md on Linux (currently 2.6.37) to create an md device, then use LVM to provide volume management on top of the device, and then use ext4 as our filesystem on the LVM volume groups. With SSDs as the drives, we'd like to see the TRIM commands propagate through the layers (ext4 - LVM - md - SSD) to the devices. It looks like recent 2.6.3x kernels have had a lot of new SSD-related TRIM support added, including lots more coverage of Device Mapper scenarios, but we still can't seem to get it to cascade down properly. Is this possible yet? If so, how? If not, is any progress being made?

  Read the article

• Utility to unmap a network drive when the screen saver starts

  - by JimR

  I'm looking for a way to unmap network drives when the screen saver turns on. I have a few users that share an external, encrypted drive (Samba share, not windows) and they have a requirement to disconnect the drive mapping when the local machine is idle. I'd also like it to warn them if there are open files on the mapped drive, if possible. There is also a requirement to force the password to be reentered before mapping when the machine comes back from idle. Is there a Windows setting or utility out there in the wild that meets these requirements?

  Read the article

• How does RAM fail?

  - by ethanlee16

  I have an issue with a Dell Inspiron 15 (1545) laptop that refuses to open any applications (save select Microsoft programs, e.g. Security Essentials, Ctrl Panel, Windows Explorer (not Internet), regedit, Event Viewer, etc.). I've run Microsoft Memory Diagnostics Tool and it found a 'hardware problem was detected.' Does this indicate that the RAM has failed? I notice when I open programs like Word, Excel, Internet Explorer, etc., it always give me an error from WerFault.exe saying The instruction at xxxxxxx referenced memory at xxxxxxxxx. The memory could not be written. and sometimes something about illegal instructions. If it is a hardware problem, does this mean that replacing the RAM is my only option? Again, I would also like to know if RAM can fail (like hard drives) and if malware can cause RAM to fail also.

  Read the article

• Backing up VM data to host drive on Windows 7

  - by malcolms

  Hi, I have created a VM for Virtual PC in windows 7. I am writing a batch file to backup data in the VM to a host USB drive. I have shared the host drives. I have a USB drive that I want to backup to. But how do refer to the USB drive in the batch file. I cannot seem to map a drive to it, It is called "H on Malcolm-Desktop" in windows explorer. This is what I have tried. XCOPY C:\Inetpub\wwwroot "\\H on Malcolm-Desktop\HALII_VHD_Backup\DataBackup\Inetpub\wwwroot" /S /E /Y /D How do I write this command? Malcolm

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

  - by Eric Liprandi

  Hi, I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

  Read the article

• Xeon X5550 vs Six-core Opteron for database server

  - by gregmac

  I'm specing out a database server, and the price works out to be reasonably close between an Intel X5550 Quad-core and an AMD 2425HE (2.1Ghz) Six-core Opteron. I've been looking for some comparisons between the two, but the only thing useful I've found is an AnandTech Review of the 2435 which compares it to Intel Xeons, but concludes they both have their place. My load is MS SQL Server 2008, with an OLTP database that has about an equal amount of reading/writing (and it's a reasonably heavy load). So my question is, what is going to work better in this situation, assuming the drives are the same: Xeon X5550, with 16GB 1333Mhz RAM (Dell R510) or an Opteron 2425HE (2.1Ghz) or 2439SE (2.8Ghz) with 16GB of 800Mhz RAM? (Dell 2970) Note: the 2439 adds $500, but the overall pricing works out that it's not that much more than the R510. Using the 2425HE, the Dell 2970 server is slightly less than the similarly-equipped R510). If it adds a decent amount of performance, it's worthwhile to go faster. (single CPU, in both cases).

  Read the article

• Windows 7 User / Documents and Settings folders

  - by Kip

  Yo, I have a machine - Windows 7, nothing remarkable about the install but i have multiple drives in the machine. I have a c:\users\username folder which seems to be current and is the one that all windows properties point to. However, i also have a f:\documents and settings\username folder (which was hidden) which is also current and up to date. If i edit anything from either, they seem to "replicate" or update each other ie if i rename an icon on my desktop, it renames it in c:\users\username\desktop and f:\documents and settings\username\desktop. Likewise if i edit directly in one of those folders, it does the same to the other. Any one got any ideas what might cause this? Problem i have is that I need to remove the f drive all together! Thanks in advance

  Read the article

• Why does the CentOS 5.8 install give an error about CD-ROM drive when using HP ILO?

  - by Mike B

  CentOS 5.8 I'm trying to install CentOS 5.8 on a box. I'm connecting the ISO to the server via a virtual disk using HP ILO. It initially seems to boot fine but in the middle of the anaconda text-mode package installation, it gives the following error: CD Not Found CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry. If I click OK, it gives me the same error. I don't understand how it could get this far and then complain about the CD-ROM drive. Any thoughts?

  Read the article

• Installing Ubuntu to a USB drive

  - by Carl Smotricz

  I'm having a rough time getting Ubuntu to run from a 250 GB USB hard drive. I booted Ubuntu 9.10 from a CD and ran the regular "install" to the attached USB drive. I used the "advanced" option on the drive partition question to put the boot loader on /dev/sdb (the USB disk) but when I boot the machine it doesn't recognize there's a boot loader on the USB drive (it offers to boot from 2 other devices but not the USB disk). I also tried booting from the Ubuntu CD and using usb-creator-gtk to set up the USB drive. Seems to me this is meant to work with flash drives. I got a bootable USB disk but it looked and worked like the CD, i.e. it gave me options of "live CD" operation, installing, memtest, etc. That's not the way I want to run the system. Some help in installing Ubuntu, bootable into a "full" running system on my USB drive would be appreciated.

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >