Search Results

Search found 32598 results on 1304 pages for 'ubuntu touch'.

Page 821/1304 | < Previous Page | 817 818 819 820 821 822 823 824 825 826 827 828  | Next Page >

  • Laptop runs HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • OUCH! Laptop running SUPER HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu editions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! (left side of terminal) (right side of terminal) This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • Why would video stutter on HDMI but not on DVI?

    - by CorvT
    I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

    Read the article

  • Cannot use second display with 12.04 and Intel 2000/3000

    - by Carolyn Marenger
    I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

    Read the article

  • Greeter login screen cropped login options in 12.04

    - by ammianus
    I have a pretty newly installed Ubuntu 12.04, using Unity. My external monitor is 1920x1080 max resolution. In the Unity desktop itself everything looks great. I have an NVidia graphics card. When I start my computer and get to the Unity greeter login screen the display is oddly formatted and the resolution seems off. It looks like a zoomed view on the larger 1920x1080 screen. As such it crops the login options off to the left hand side of the screen. So I can only just see the edge of the password box for the user I want to log in with. I can log in with one account by default by blindly typing the password, but I am unable to switch to other accounts. Is there anything I can do to fix the log in screen display so that I can see the normal login options? Note: I first noticed it when I changed my desktop background and the next time I logged in I saw the issue.

    Read the article

  • Extension GLX missing...on a desktop PC

    - by Bart van Heukelom
    I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

    Read the article

  • Missing launcher after 12.04 upgrade

    - by Preston Zacharias
    I recently upgraded to ubuntu 12.04 and after doing some updates and such my application launcher and title bars (for window dialogues) are missing. Basically the entire unity GUI is missing! Not sure what happened so I installed gnome 3 and it was missing a launcher too, but did have title bars. In addition the bar found at the top that lets you know what's open and allows gnome extensions to be displayed is not interactive. I can't click, right click, alt + click (right or left), alt + super click (right or left) anywhere! I even installed an application menu from the gnome site and it is not interactive either. However, since there is no way to launch applications i have to use terminal and if i minimize an app it will disappear completely. Then i decided to try unity 2D and it is incredibly messed up. Black background, launcher is there but icons and top bar while on desktop are completely distorted. They're not just pixalated; they're all sorts of funky colors and when i open something from unity 2d launcher it will show it's opened in the launcher but nothing appears on my screen. When trying to view videos on youtube the video is distorted and looks just as unity 2d does. Strange enough: the audio works fine, just not videos. Pictures loads, but not ads that stream video. Any suggestions to get my launcher and the unity GUI back? I tried reinstalling gnome, unity 3d, and unity 2d from terminal. no change. also reinstalled unity desktop and tried resetting it: nothing happened.

    Read the article

  • Cannot Boot, How to recover

    - by Kendor
    Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

    Read the article

  • Xorg crashes ever since using Nvidia dual monitors

    - by legion
    Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • FTP Connection established...Connection timed out problem with all my sites and FTP programs?

    - by janoChen
    Just few hours ago FileZilla was working fine. Then, suddenly I started to get this error: Status: Resolving address of ftp.readtypechinese.com Status: Connecting to 69.175.14.60:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server And it happens with all my sites: Status: Resolving address of edasich.dreamhost.com Status: Connecting to 173.236.223.223:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server I'm using FileZilla 3.5.0 and Ubuntu 11.10. Any suggestions to fix this? (I already tried Passive mode and it doesn't work). EDIT: Ocasionally, the log goes beyond the ...waiting for welcome message: Status: Connection established, waiting for welcome message... Response: 220 DreamHost FTP Server Command: USER aleche23 Error: Connection timed out Error: Could not connect to server But the connection gets timed out again. Weird...I just realized that I have the same problems with other FTP programs too: gFTP: Looking up ftp.readtypechinese.com Trying readtypechinese.com:21 Connected to readtypechinese.com:21 220 ProFTPD 1.3.2 Server (server) [69.175.14.60] USER [email protected] Connection to ftp.readtypechinese.com timed out

    Read the article

  • Where is my ram?

    - by gsedej
    I have 2GB installed on my machine running Ubuntu 12.04. After some time of use, I see much of my RAM used. The RAM does not free enough even though I closed all my programs. I included 2 screenshots. First is "Gnome system monitor" (all process) and second is "htop" (with sudo), both sorted by memory usage. From both you see, that it's not possible that all running apps takes together 1GB of memory. First 7 biggest programs sum 250, but others are much smaller (all can't sum even 100MB). The cache is 300MB (yellow ||| on htop) and is not included in 1GB used. Also 260MB is already on swap. (which actually makes 1,3GB of used memory) If i start Firefox (or Chrome) with many tabs, it has only 1GB available and not potentially 1,5 GB (assume 0,5GB is for system). When I need more ram, swapping happens. So where is my ram? Which program is using it? How can i free it, to be available for e.g. Firefox? Gnome system monitor htop

    Read the article

  • How to write code that communicates with an accelerator in the real address space (real mode)?

    - by ysap
    This is a preliminary question for the issue, where I was asked to program a host-accelerator program on an embedded system we are building. The system is comprised of (among the standard peripherals) an ARM core and an accelerator processor. Both processors access the system bus via their bus interfaces, and share the same 32-bit global physical memory space. Both share access to the system's DRAM through the system bus. (The computer concept is similar to Beagleboard/raspberry Pie, but with a specialized accelerator added) The accelerator has its own internal memory (SRAM) which is exposed to the system and occupies a portion of the global address space (as opposed to how a graphics card would talk to teh CPU via a "small" aperture in the system memory space). On the ARM core (the host) we plan on running Ubuntu 12.04. The mode of operation of communicating between the processors should be that the host issues memory transactions on the system bus that are targeted at the accelerator internal memory. As far as my understanding goes, if I write a program for the host that simply writes to the physical address of the accelerator, most chances are that the program will crash due to a segmentation violation. So, I assume that I need some way of communicating with the device in real mode. What is the easiest way to achieve this mode of operation?

    Read the article

  • USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

    - by Glyn Normington
    After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

    Read the article

  • What went wrong with my curl install?

    - by Danjah
    I'm fresher than the prince to Linux, I've been following the instructions here: http://chrisfulstow.com/running-node-js-on-windows-with-virtualbox-and-ubuntu (the link tells what I am generally trying to do). I'm all up and running in VBox, and am at the curl install part, I may have done the curl part a week ago I forget. So I ran this command anyway: danjah@danjah-VirtualBox:~$ sudo apt-get install curl Result: [sudo] password for danjah: Reading package lists... Done Building dependency tree Reading state information... Done curl is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Then: $ curl http://npmjs.org/install.sh | sudo npm_install=rc sh Result: fetching: { gzip: stdin: unexpected end of file /bin/tar: Child returned status 1 /bin/tar: Error is not recoverable: exiting now It failed Should I be concerned? How can I test curl? How can I avoid these situations? Perhaps there's a generic way of checking to see if I've already installed packages/etc? Case specific answers and general advice most appreciated. cheers, d

    Read the article

  • Trying to build/install patched gtk3-engines-oxygen to test bugfix, get shared changelog.Debian.gz is different from other instances of package

    - by andlabs
    I want to just quickly test the patch in this bug report to gtk3-engines-oxygen so it can go upstream. I could test it either temporarily or permanently; I would just like to do it. I currently have the package installed. So far, I've tried: $ mkdir /tmp/o # keep everything self-contained $ cd /tmp/o $ apt-get source gtk3-engines-oxygen $ cd oxygen-gtk3-1.3.5/ $ patch -p1 < /path/to/patchfile $ dpkg-source --commit # to make debuild happy (name 'layout'; just save the default; this is a test) $ debuild -us -uc # bypass signature checks $ sudo debi ../oxygen-gtk3_1.3.5-0ubuntu1_amd64.changes According to some people on #ubuntu-packaging, this is what I have to do. It's this last step that's the problem; I'm getting (Reading database ... 503333 files and directories currently installed.) Preparing to unpack gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb ... Unpacking gtk3-engines-oxygen:amd64 (1.3.5-0ubuntu1) over (1.3.5-0ubuntu1) ... dpkg: error processing archive gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb (--install): trying to overwrite shared '/usr/share/doc/gtk3-engines-oxygen/changelog.Debian.gz', which is different from other instances of package gtk3-engines-oxygen:amd64 Errors were encountered while processing: gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb debi: debpkg -i failed What's going on? How do I fix it? Or am I doing this completely wrong (and ergo so are they)? I'm using Kubuntu 14.04 amd64. Thanks.

    Read the article

  • Partition Alignment Confusion

    - by user170757
    I have a new Samsung 840 250GB SSD on the way, and I want to make sure that everything is running optimally after install. I've spent many frustrating hours on the internet trying to understand how I should align the partitions of the SSD when it arrives (and even how to partition everything; my other drive is a 1TB HDD with files already on it). I'd like to know a foolproof way of setting everything up. Now, the only place I could find the erase block size of the 840 is here: http://thessdreview.com/Forums/ssd-beginners-guide-discussion/3630.htm I simply can't understand why such information isn't made freely accessible by manufacturers! But, anyway, this would suggest the EBS is 1536kb, which seems odd to me. It is to my understanding that you should now align by MiB (usually set at 1MiB). I assume that the figure above should actually be 1536k B=1.5MiB? This seems to suggest the partition alignment will be somewhat non-standard. So my question is: How do I align my partitions given this information? Please bear in mind that I have never used linux before; I'm doing my best to get everything set up so that I can begin to learn but am finding this process incredibly opaque and time consuming. If possible, a step by step guide through GParted would be great; at the moment I'm considering an NTFS partition ~20GB for Windows (playing games), an EXT4 ~20GB for ubuntu (for doing everything else) and a shared documents+games partition for everything else in NTFS file format. I'm not going to have any swap partition and use swap files instead.

    Read the article

  • Why does 12.04 try but fail to hibernate, even after I enabled hibernation?

    - by Roger Davis
    Regarding the below (-----) info from another post, my system will try (as is said below) to hibernate, but it won't get all the way there. Hard drive activity stops, but it does not shut down. If I turn the power off, then back on, it will start, but I have to "restore previous session" in the browser and other open apps don't restart, with the accompanying hassle. So because it tries, will the suggested fix then cause it to work correctly, or is the literal "try" not really what he means?!? PLEASE NOTE - this is a desktop system, not a laptop. Before enabling hibernation, please try to test whether it works correctly by running pm-hibernate in a terminal. The system will try to hibernate. If you are able to start the system again then you are more or less safe to add an override. To do so, start editing sudo nano /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla Fill it with this [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Save by pressing Ctrl-O and exit nano by pressing Ctrl-X Restart and hibernation is back!

    Read the article

  • Uninstalling ATI's drivers and installing NVIDIA's?

    - by whydidithavetobreak
    I replaced my card but I'm not sure how to set things up on Ubuntu. When the computer boots, it doesn't start GDM (I think that's what it's called). Instead, it asks me to log in the command line. If I try to do a startx, it tells me there is no AMD device connected or something to that extent. I originally installed the ATI drivers using the GUI. It said that I was using the limited drivers or something to that extent with a popup on the right of one of the taskbars, so I clicked there and updated it. I think it could also be reached by going to system administration restricted drivers or something close to that. I tried installing the nivida drivers by doing a "sudo apt-get install nvidia-glx-185" and then doing "sudo modprobe nvidia" and "sudo nvidia-xconfig" as this guy says but that didn't work. Modprobe couldn't find anything related to Nvidia and nvidia-xconfig wasn't an available command for me. Since I wasn't sure how to remove the ATI drivers I did that without messing with them. Not sure if that was a good idea.

    Read the article

  • Why can't non-admin users install software?

    - by fiftyeight
    This is probably something I don't understand since I am used to Windows and am only starting out with Ubuntu. I know that software in linux comes in packages what I don't understand is why can't non-admin users install software. I mean, every application is run by a specific user, and that user will only be able to run that applciation with his privilages, so if he has no admin privileges, the application also won't be able to access unauthorized directories etc. I want most of the time to work on my PC with a non-admin user since it seems more safe to me, most of the time I have no need for admin privileges. and even though I know viruses in linux are uncommon I still think the best practice is to work on the computer in a state that you yourself can't make any changes to important files, that way viruses also can't harm any important files, but I need to install software for programming and web-design etc. and first of all I don't want to switch users all the time. But also it sounds safer to me that everything being done on the PC will be done through the non-admin user. I'll be glad to know what misunderstanding I have here, cause something here doesn't sound right.

    Read the article

  • GeForce and Radeon: what is present condition of opensource and proprietary drivers?

    - by Septagram
    So, it'm about to buy a fresh videocard. Since I do most of my stuff on Linux, I wonder how well will either videocard perform. I recently had a good experience with GeForce 6600 with proprietary drivers and a less than satisfactory experience with Radeon 9000 a while ago. From my experience, proprietary drivers for GeForce used to work very well, while proprietary drivers for Radeon failed miserably. And opensource drivers were sloooow. A few months ago I found out that ATI opened their specifications, and a work on fully featured opensource driver is in progress. I prefer to use free software whenever possible, with the exception of games, so, if that driver is fast enough, feature-rich enough and reliable enough I'd very much like to try it out. I wish I could say that if I can just to basic things, like watch video, heavily use compiz and work with simple applications, this may be enough. I do most of my gaming under Windows anyway. However, there is a good chance I'll go into indie game development in a few months fulltime, so it should also be able to run not-so-very-demanding games (say Nexuiz). But if it isn't, I'd like to know, what to expect from proprietary drivers. Do recent proprietary drivers from NVIDIA and ATI work well? Are ATI drivers just as easy to install on Ubuntu as are NVIDIA drivers?

    Read the article

  • External Full HD monitor and Virtual Desktop Size

    - by Stefan
    I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

    Read the article

  • How can I remove unmounted SD Card icons from my desktop?

    - by user75286
    I have been using some audio utilities in Ubuntu 11.10 to tweak .mp3 files on my phone (Motorola Photon 4G). I connect via USB... both my phone and the internal SD card are mounted as two separate drives. The SD card has an unusual drive name with some odd characters. When I'm finished, I unmount my phone (or "safely remove drive"), but the SD card can't be unmounted. I've mounted and unmounted my phone on 4 occasions now, and there are now 4 SD card drive icons that I can't remove from the desktop. I tried using the gconf-editor/apps/nautilus/desktop trick to make drives invisible and it's not working. Right-clicking on the icons and selecting "unmount" produced the following error message; (I can't type the unusual drive name characters... replaced with xxx) Unable to unmount xxx umount: /media/xxx is not mounted (according to mtab) How can I remove the unwanted icons from the desktop and is there a method for avoiding this problem in the future? Thanks!

    Read the article

  • How do I remove a malformed line from my sources.list?

    - by eminencejae
    I have unistalled and reinstalled the Ubuntu Software Center as per info I found in a similar thread and I got the same response about line 91 or something like that. I just tried to upload a screen shot but since I'm new it won't allow me to. I also can not figure out how to cut and paste anything so I have to hand type what the error screen says, both when I attempt to open the software center and nothing happens, when I try to enter commands into the terminal to uninstall, reinstall, whatever I get the same following: COULD NOT INTITIALIZE THE PACKAGE INFORMATION An unresolvable problem occured while initializing the package information Please report t:his bug against the 'update-manager' package and include the following error message: 'E: Malformed line 91 in source list/etc/apt/sources.list (dist parse) E: The list of sources could not be read., E: The package list of status file could not be parsed or opened. How do I report bugs? What can be done about this. I have searched and everything everyone says to do leads me back to the same line error message. So, I don't know how to get to line 91 in the source list; to tell you what it says. Sorry, I'm really new to this. That is what I need is to find out how to get there and fix what it says. I would really like to NOT have to re partition my hard drive and start from scratch, so I'm really looking forward to getting this problem solved. I need to be able to install new software.

    Read the article

  • Setting up a shared media drive

    - by Sam Brightman
    I want to have a shared media drive be transparently usable to all users, whilst also sticking to FHS and Ubuntu standards. The former takes priority if necessary. I currently mount it at /media/Stuff but /media is supposed to be for external media, I believe. The main issue is setting permissions so that access to read and write to the drive can be granted to multiple users working within the same directories. InstallingANewHardDrive seems both slightly confused and not what I want. It claims that this sets ownership for the top-level directory (despite the recursion flag): sudo chown -R USERNAME:USERNAME /media/mynewdrive And that this will let multiple users create files and sub-directories but only delete their own: sudo chgrp plugdev /media/mynewdrive sudo chmod g+w /media/mynewdrive sudo chmod +t /media/mynewdrive However, the group writeable bit does not seem to get inherited, which is troublesome for keeping things organised (prevents creation inside sub-folders originally made by another user). The sticky bit is probably also unwanted for the same reason, although currently it seems that one userA (perhaps the owner of the mount-point?) can delete the userB's files, but not vice-versa. This is fine, as long as userB can create files inside the directory of userA. So: What is the correct mount point? Is plugdev the correct group? Most importantly, how to set up permissions to maintain an organised media drive? I do not want to be running cron jobs to set permissions regularly!

    Read the article

< Previous Page | 817 818 819 820 821 822 823 824 825 826 827 828  | Next Page >