Search Results

Search found 23374 results on 935 pages for 'james may'.

Page 826/935 | < Previous Page | 822 823 824 825 826 827 828 829 830 831 832 833  | Next Page >

• Fixing some Visual Studio RC install issues

  - by terje

  The Visual Studio RC has shown some install issues in some cases, particularly for those who upgrades from VS 11 Beta.  I have listed the fixes known now below, and will update if there are more issues.  Note that a repair will not fix the issue, and a Windows restore and subsequent reinstall may not fix it either.  The system seems to remember too much. That was the case for me, at least.  The fixes below however, cures these issues. 1. The Team Explorer Build node doesn’t work You get an error saying System.TypeLoadException like this: To solve this do as follows: 1. Open a command prompt as administrator 2. Go to your program files directory for VS 2012 and down to  the extension folder like:   C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer 3. Run “gacutil –if Microsoft.TeamFoundation.Build.Controls.dll     2. The SQL Editor gives loading error When you start up VS 2012 RC you get a loading error message.  The same happens if you try to go from the menu to  SQL/Transact-SQL Editor/New Query.    To solve this do as follows: 1. Open Control Panel/Programs and Features 2. Locate the “Microsoft SQL Server 2012 Data-Tier App Framework     (Note , you might find up to 4 such instances) The ones with version numbers ending in 55 is from the SQL 2012 RC, the ones ending in 60 is from the SQL 2012 RTM.  There are two of each, one for x32 and one for x64.  Which is which no one knows. 3. Right click each of them, and select Repair. (It would be nice if someone with this issue tries only the latest RTM ones, and see if that clears the error, and comment back to this post. I am out of non-functioning VS’s )   3.  Errors referring to some extension You get errors referring to some extension that can’t be loaded, or can’t be found.  Check the activity log (see below), and verify there.  If you see yellow collision warnings there, the fix here should solve those too. To solve these:    1. Open a Visual Studio 2012 command prompt 2.  Run:   devenv /resetsettings     How to check for errors using the log Do as follows to get to the activity log for Visual studio 2012 RC 1. Open a Visual Studio 2012 command prompt 2. Run:   devenv /log This starts up Visual Studio.  3. Go to %appdata%/Microsoft\VisualStudio\11.0 4. Double click the file named ActivityLog.xml.  It will start up in your browser, and be formatted using the xslt in the same directory. 5.  Look for items marked in red.  Example for Issue 1 :

  Read the article

• The Evolution of Oracle Direct EMEA by John McGann

  - by user769227

  John is expanding his Dublin based team and is currently recruiting a Director with marketing and sales leadership experience: http://bit.ly/O8PyDF Should you wish to apply, please send your CV to [email protected] Hi, my name is John McGann and I am part of the Oracle Direct management team, based in Dublin.   Today I’m writing from the Oracle London City office, right in the heart of the financial district and up to very recently at the centre of a fantastic Olympic Games. The Olympics saw individuals and teams from across the globe competing to decide who is Citius, Altius, Fortius - “Faster, Higher, Stronger" There are lots of obvious parallels between the competitive world of the Olympics and the Business environments that many of us operate in, but there are also some interesting differences – especially in my area of responsibility within Oracle. We are of course constantly striving to be the best - the best solution on offer for our clients, bringing simplicity to their management, consumption and application of information technology, and the best provider when compared with our many niche competitors.   In Oracle and especially in Oracle Direct, a key aspect of how we achieve this is what sets us apart from the Olympians.  We have long ago eliminated geographic boundaries as a limitation to what we can achieve. We assemble the strongest individuals across multiple countries and bring them together in teams focussed on a single goal. One such team is the Oracle Direct Sales Programs team. In case you don’t know, Oracle Direct EMEA (Europe Middle East and Africa) is the inside sales division in Oracle and it is where I started my Oracle career.  I remember that my first role involved putting direct mail in envelopes.... things have moved on a bit since then – for me, for Oracle Direct and in how we interact with our customers. Today, the team of over 1000 people is located in the different Oracle Direct offices around Europe – the main ones are Malaga, Berlin, Prague and Dubai plus the headquarters in Dublin. We work in over 20 languages and are in constant contact with current and future Oracle customers, using the latest internet and telephone technologies to effectively communicate and collaborate with each other, our customers and prospects. One of my areas of responsibility within Oracle Direct is the Sales Programs team. This team of 25 people manages the planning and execution of demand generation, leading the process of finding new and incremental revenue within Oracle Direct. The Sales Programs Managers or ‘SPMs’ are embedded within each of the Oracle Direct sales teams, focussed on distinct geographies or product groups. The SPMs are virtual members of the regional sales management teams, and work closely with the sales and marketing teams to define and deliver demand generation activities. The customer contact elements of these activities are executed via the Oracle Direct Sales and Business Development/Lead Generation teams, to deliver the pipeline required to meet our revenue goals. Activities can range from pan-EMEA joint sales and marketing campaigns, to very localised niche campaigns. The campaigns might focus on particular segments of our existing customers, introducing elements of our evolving solution portfolio which customers may not be familiar with. The Sales Programs team also manages ‘Nurture’ activities to ensure that we develop potential business opportunities with contacts and organisations that do not have immediate requirements. Looking ahead, it is really important that we continue to evolve our ability to add value to our clients and reduce the physical limitations of our distance from them through the innovative application of technology. This enables us to enhance the customer buying experience and to enable the Inside Sales teams to manage ever more complex sales cycles from start to finish.  One of my expectations of my team is to actively drive innovation in how we leverage data to better understand our customers, and exploit emerging technologies to better communicate with them.   With the rate of innovation and acquisition within Oracle, we need to ensure that existing and potential customers are aware of all we have to offer that relates to their business goals.   We need to achieve this via a coherent communication and sales strategy to effectively target the right people using the most effective medium. This is another area where the Sales Programs team plays a key role.

  Read the article

• Indexed view deadlocking

  - by Dave Ballantyne

  Deadlocks can be a really tricky thing to track down the root cause of.  There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward.  That being said,  deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs.  There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables,  Products and Stock.  The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes,  an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round.  Then, after a while, something else happened… The system updating the data changed,  The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews.  But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them.  Period.  There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other.  Then it struck us,  AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated.  When this happens, the data in all the tables have to be read, so that explains our deadlocks.  The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated.  Luckily it was a relatively simple fix to order the updates and deadlocks went away.  Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

  Read the article

• 10 Steps to access Oracle stored procedures from Crystal Reports

  Requirements to access Oracle stored procedures from CR The following requirements must be met in order for CR to access an Oracle stored procedure: 1. You must create a package that defines the REF CURSOR. This REF CURSOR must be strongly bound to a static pre-defined structure (see Strongly Bound REF CURSORs vs Weakly Bound REF CURSORs). This package must be created separately and before the creation of the stored procedure. NOTE Crystal Reports 9 native connections will support Oracle stored procedures created within packages as well as Oracle stored procedures referencing weakly bound REF CURSORs. Crystal Reports 8.5 native connections will support Oracle stored procedures referencing weakly bound REF CURSORs. 2. The procedure must have a parameter that is a REF CURSOR type. This is because CR uses this parameter to access and define the result set that the stored procedure returns. 3. The REF CURSOR parameter must be defined as IN OUT (read/write mode). After the procedure has opened and assigned a query to the REF CURSOR, CR will perform a FETCH call for every row from the query's result. This is why the parameter must be defined as IN OUT. 4. Parameters can only be input (IN) parameters. CR is not designed to work with OUT parameters. 5. The REF CURSOR variable must be opened and assigned its query within the procedure. 6. The stored procedure can only return one record set. The structure of this record set must not change, based on parameters. 7. The stored procedure cannot call another stored procedure. 8. If using an ODBC driver, it must be the CR Oracle ODBC driver (installed by CR). Other Oracle ODBC drivers (installed by Microsoft or Oracle) may not function correctly. 9. If you are using the CR ODBC driver, you must ensure that in the ODBC Driver Configuration setup, under the Advanced Tab, the option 'Procedure Return Results' is checked ON. 10. If you are using the native Oracle driver and using hard-coded date selection within the procedure, the date selection must use either a string representation format of 'YYYY-DD-MM' (i.e. WHERE DATEFIELD = '1999-01-01') or the TO_DATE function with the same format specified (i.e. WHERE DATEFIELD = TO_DATE ('1999-01-01','YYYY-MM-DD'). For more information, refer to kbase article C2008023. 11. Most importantly, this stored procedure must execute successfully in Oracle's SQL*Plus utility. If all of these conditions are met, you must next ensure you are using the appropriate database driver. Please refer to the sections in this white paper for a list of acceptable database drivers. span.fullpost {display:none;}

  Read the article

• Chalk Talk with John: How Does SOA Add Value to Your Enterprise?

  - by John Brunswick

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In this episode of Chalk Talk with John we revisit our town of Middleware Fields from What Does User Experience Mean to You? to look at demystifying the business value of SOA. Middleware fields is an extremely eco-conscious community and has been trying to setup a commuting program for their employees. Though a good idea, they soon run into challenges ensuring that people are able to use the commuting services easily.  Take a look below to see how SOA is like a transit pass for your enterprise and how it addresses common issues you may have with your enterprise systems. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} About me: Hi, I am John Brunswick, an Oracle Enterprise Architect. As an Oracle Enterprise Architect, I focus on the alignment of technical capabilities in support of business vision and objectives, as well as the overall business value of technology.  Before coming to Oracle, I was a Practice Manager within BEA System's Business Interaction Division consulting organization, orchestrating enterprise systems in support of line of business goals. Follow me on Twitter and visit my site for Oracle Fusion Middleware related tips.

  Read the article

• NetworkManager Applet shows no networks

  - by Kkelk

  I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

  Read the article

• Synchronous Actions

  - by Dan Krasinski-Oracle

  Since the introduction of SMF, svcadm(1M) has had the ability to enable or disable a service instance and wait for that service instance to reach a final state.  With Oracle Solaris 11.2, we’ve expanded the set of administrative actions which can be invoked synchronously. Now all subcommands of svcadm(1M) have synchronous behavior. Let’s take a look at the new usage: Usage: svcadm [-v] [cmd [args ... ]] svcadm enable [-rt] [-s [-T timeout]] <service> ... enable and online service(s) svcadm disable [-t] [-s [-T timeout]] <service> ... disable and offline service(s) svcadm restart [-s [-T timeout]] <service> ... restart specified service(s) svcadm refresh [-s [-T timeout]] <service> ... re-read service configuration svcadm mark [-It] [-s [-T timeout]] <state> <service> ... set maintenance state svcadm clear [-s [-T timeout]] <service> ... clear maintenance state svcadm milestone [-d] [-s [-T timeout]] <milestone> advance to a service milestone svcadm delegate [-s] <restarter> <svc> ... delegate service to a restarter As you can see, each subcommand now has a ‘-s’ flag. That flag tells svcadm(1M) to wait for the subcommand to complete before returning. For enables, that means waiting until the instance is either ‘online’ or in the ‘maintenance’ state. For disable, the instance must reach the ‘disabled’ state. Other subcommands complete when: restart A restart is considered complete once the instance has gone offline after running the ‘stop’ method, and then has either returned to the ‘online’ state or has entered the ‘maintenance’ state. refresh If an instance is in the ‘online’ state, a refresh is considered complete once the ‘refresh’ method for the instance has finished. mark maintenance Marking an instance for maintenance completes when the instance has reached the ‘maintenance’ state. mark degraded Marking an instance as degraded completes when the instance has reached the ‘degraded’ state from the ‘online’ state. milestone A milestone transition can occur in one of two directions. Either the transition moves from a lower milestone to a higher one, or from a higher one to a lower one. When moving to a higher milestone, the transition is considered complete when the instance representing that milestone reaches the ‘online’ state. The transition to a lower milestone, on the other hand, completes only when all instances which are part of higher milestones have reached the ‘disabled’ state. That’s not the whole story. svcadm(1M) will also try to determine if the actions initiated by a particular subcommand cannot complete. Trying to enable an instance which does not have its dependencies satisfied, for example, will cause svcadm(1M) to terminate before that instance reaches the ‘online’ state. You’ll also notice the optional ‘-T’ flag which can be used in conjunction with the ‘-s’ flag. This flag sets a timeout, in seconds, after which svcadm gives up on waiting for the subcommand to complete and terminates. This is useful in many cases, but in particular when the start method for an instance has an infinite timeout but might get stuck waiting for some resource that may never become available. For the C-oriented, each of these administrative actions has a corresponding function in libscf(3SCF), with names like smf_enable_instance_synchronous(3SCF) and smf_restart_instance_synchronous(3SCF).  Take a look at smf_enable_instance_synchronous(3SCF) for details.

  Read the article

• Cloud Apps News @#OOW12

  - by Natalia Rachelson

  All eyes were on Oracle this past week and the news cycle was in full swing. What better time to make some key announcements that were guaranteed to create buzz ... and so we did. The name of the game was Cloud! Here are the key Cloud announcements for Apps, which included Fusion Tap that enables mobility across all Cloud Apps, HCM customer momentum in the Cloud, and our very first ERP Cloud Services customer. Oracle Unveils Oracle Fusion Tap for the iPadOracle Fusion Tap - Productivity Amplified Anywhere, Anytime "Both the enterprise and technology providers must recognize the need to innovate and adapt for the increasing mobility of the workforce - not just for sales teams, but across the organization," said Carter Lusher, Research Fellow and Chief Analyst of Enterprise Applications Ecosystem, Ovum. "A mobile application that quickly and powerfully allows employees to make connections, analyze data, and complete activities at any time and wherever they may be located drives new levels of business value and enhances efficiency. Frankly, mobile access is no longer a 'nice to have' but a 'must have.'"  "The mobile workforce is a business reality, and Oracle Fusion Tap is an example of how Oracle delivers mobile and cloud innovations that fundamentally improve productivity and how we work," said Chris Leone, Senior Vice President of Application Development, Oracle. "With Oracle Fusion Tap users will have an all-in-one, easily extensible app that puts mission-critical data and colleague connection at their fingertips." The entire release is available here http://www.oracle.com/us/corporate/press/1855392 Customers Live on Oracle Fusion Human Capital ManagementOracle HCM Cloud Service Helps Power HR's Contribution to the Business "More than 25 of the 100-plus customers who have selected Oracle Fusion Human Capital Management (HCM) are already live. Ardent Leisure, Peach Aviation, Toshiba Medical Systems and Zillow have deployed Oracle HCM Cloud Service and are using it to transform their HR operations. They join companies such as Principal Financial Group and Elizabeth Arden, who are already using Oracle HCM Cloud Service to help manage international growth and deliver pervasive, role-based, configurable solutions to their employees. With these recent go-lives, Oracle takes a leading position in successfully bringing live HCM customers in the cloud."  "As a technology company, Zillow looked to a partner who could scale with us. Zillow has gone live on Oracle HCM Cloud Service, which will give us the ability automate and streamline HR operations for our employees in the near future," said Sarah Bilton, Senior Director HR, Zillow. Read the entire release here http://www.oracle.com/us/corporate/press/1859573 Lending Club Selects Oracle ERP Cloud Service to Help Increase Insight and EfficienciesOracle ERP Cloud Service Provides an Open Architecture, Best-of-Breed Decision-Making, and Scalability in the Cloud "Lending Club, the leading platform for investing in and obtaining personal loans, has selected Oracle ERP Cloud Service to help improve decision-making and workflow, implement robust reporting, and take advantage of the inherent scalability and cost savings provided by the cloud. With more than 76,000 borrowers and 90,000 investors Lending Club utilizes technology and innovation to reduce the cost of traditional banking and offer borrowers better rates and investors better returns.  After an extensive search, Lending Club selected Oracle ERP Cloud Service due to the breadth and depth of capabilities and ongoing innovation of Oracle ERP Cloud Service, as well as Oracle's open architecture, industry leadership and commitment to partners." "Lending Club is an innovative, data-intensive, high-growth company and we needed a solution and partner that could match us," said Carrie Dolan, CFO, Lending Club. "We conducted a thorough review of our options, and Oracle ERP Cloud Service was the clear winner in terms of capabilities and business value as well as commitment to us as a customer." Read the entire release here http://www.oracle.com/us/corporate/press/1859020

  Read the article

• Valuing "Working Software over Comprehensive Documentation"

  - by tom.spitz

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} I subscribe to the tenets put forth in the Manifesto for Agile Software Development - http://agilemanifesto.org. As Oracle's chief methodologist, that might seem a self-deprecating attitude. After all, the agile manifesto tells us that we should value "individuals and interactions" over "processes and tools." My job includes process development. I also subscribe to ideas put forth in a number of subsequent works including Balancing Agility and Discipline: A Guide for the Perplexed (Boehm/Turner, Addison-Wesley) and Agile Project Management: Creating Innovative Products (Highsmith, Addison-Wesley). Both of these books talk about finding the right balance between "agility and discipline" or between a "predictive and adaptive" project approach. So there still seems to be a place for us in creating the Oracle Unified Method (OUM) to become the "single method framework that supports the successful implementation of every Oracle product." After all, the real idea is to apply just enough ceremony and produce just enough documentation to suit the needs of the particular project that supports an enterprise in moving toward its desired future state. The thing I've been struggling with - and the thing I'd like to hear from you about right now - is the prevalence of an ongoing obsession with "documents." OUM provides a comprehensive set of guidance for an iterative and incremental approach to engineering and implementing software systems. Our intent is first to support the information technology system implementation and, as necessary, support the creation of documentation. OUM, therefore, includes a supporting set of document templates. Our guidance is to employ those templates, sparingly, as needed; not create piles of documentation that you're not gonna (sic) need. In other words, don't serve the method, make the method serve you. Yet, there seems to be a "gimme" mentality in some circles that if you give me a sample document - or better yet - a repository of samples - then I will be able to do anything cheaply and quickly. The notion is certainly appealing AND reuse can save time. Plus, documents are a lowest common denominator way of packaging reusable stuff. However, without sustained investment and management I've seen "reuse repositories" turn quickly into garbage heaps. So, I remain a skeptic. I agree that providing document examples that promote consistency is helpful. However, there may be too much emphasis on the documents themselves and not enough on creating a system that meets the evolving needs of the business. How can we shift the emphasis toward working software and away from our dependency on documents - especially on large, complex implementation projects - while still supporting the need for documentation? I'd like to hear your thoughts.

  Read the article

• How views are changing in future versions of SQL

  - by Rob Farley

  April is here, and this weekend, SQL v11.0 (previous known as Denali, now known as SQL Server 2012) reaches general availability. And so I thought I’d share some news about what’s coming next. I didn’t hear this at the MVP Summit earlier this year (where there was lots of NDA information given, but I didn’t go), so I think I’m free to share it. I’ve written before about CTEs being query-scoped views. Well, the actual story goes a bit further, and will continue to develop in future versions. A CTE is a like a “temporary temporary view”, scoped to a single query. Due to globally-scoped temporary objects using a two-hashes naming style, and session-scoped (or ‘local’) temporary objects a one-hash naming style, this query-scoped temporary object uses a cunning zero-hash naming style. We see this implied in Books Online in the CREATE TABLE page, but as we know, temporary views are not yet supported in the SQL Server. However, in a breakaway from ANSI-SQL, Microsoft is moving towards consistency with their naming. We know that a CTE is a “common table expression” – this is proving to be a more strategic than you may have appreciated. Within the Microsoft product group, the term “Table Expression” is far more widely used than just CTEs. Anything that can be used in a FROM clause is referred to as a Table Expression, so long as it doesn’t actually store data (which would make it a Table, rather than a Table Expression). You can see this is not just restricted to the product group by doing an internet search for how the term is used without ‘common’. In the past, Books Online has referred to a view as a “virtual table” (but notice that there is no SQL 2012 version of this page). However, it was generally decided that “virtual table” was a poor name because it wasn’t completely accurate, and it’s typically accepted that virtualisation and SQL is frowned upon. That page I linked to says “or stored query”, which is slightly better, but when the SQL 2012 version of that page is actually published, the line will be changed to read: “A view is a stored table expression (STE)”. This change will be the first of many. During the SQL 2012 R2 release, the keyword VIEW will become deprecated (this will be SQL v11 SP1.5). Three versions later, in SQL 14.5, you will need to be in compatibility mode 140 to allow “CREATE VIEW” to work. Also consistent with Microsoft’s deprecation policy, the execution of any query that refers to an object created as a view (rather than the new “CREATE STE”), will cause a Deprecation Event to fire. This will all be in preparation for the introduction of Single-Column Table Expressions (to be introduced in SQL 17.3 SP6) which will finally shut up those people waiting for a decent implementation of Inline Scalar Functions. And of course, CTEs are “Common” because the Table Expression definition needs to be repeated over and over throughout a stored procedure. ...or so I think I heard at some point. Oh, and congratulations to all the new MVPs on this April 1st. @rob_farley

  Read the article

• C++ property system interface for game editors (reflection system)

  - by Cristopher Ismael Sosa Abarca

  I have designed an reusable game engine for an project, and their functionality is like this: Is a completely scripted game engine instead of the usual scripting languages as Lua or Python, this uses Runtime-Compiled C++, and an modified version of Cistron (an component-based programming framework).to be compatible with Runtime-Compiled C++ and so on. Using the typical GameObject and Component classes of the Component-based design pattern, is serializable via JSON, BSON or Binary useful for selecting which objects will be loaded the next time. The main problem: We want to use our custom GameObjects and their components properties in our level editor, before used hardcoded functions to access GameObject base class virtual functions from the derived ones, if do you want to modify an property specifically from that class you need inside into the code, this situation happens too with the derived classes of Component class, in little projects there's no problem but for larger projects becomes tedious, lengthy and error-prone. I've researched a lot to find a solution without luck, i tried with the Ogitor's property system (since our engine is Ogre-based) but we find it inappropiate for the component-based design and it's limited only for the Ogre classes and can lead to performance overhead, and we tried some code we find in the Internet we tested it and worked a little but we considered the macro and lambda abuse too horrible take a look (some code omitted): IWE_IMPLEMENT_PROP_BEGIN(CBaseEntity) IWE_PROP_LEVEL_BEGIN("Editor"); IWE_PROP_INT_S("Id", "Internal id", m_nEntID, [](int n) {}, true); IWE_PROP_LEVEL_END(); IWE_PROP_LEVEL_BEGIN("Entity"); IWE_PROP_STRING_S("Mesh", "Mesh used for this entity", m_pModelName, [pInst](const std::string& sModelName) { pInst->m_stackMemUndoType.push(ENT_MEM_MESH); pInst->m_stackMemUndoStr.push(pInst->getModelName()); pInst->setModel(sModelName, false); pInst->saveState(); }, false); IWE_PROP_VECTOR3_S("Position", m_vecPosition, [pInst](float fX, float fY, float fZ) { pInst->m_stackMemUndoType.push(ENT_MEM_POSITION); pInst->m_stackMemUndoVec3.push(pInst->getPosition()); pInst->saveState(); pInst->m_vecPosition.Get()[0] = fX; pInst->m_vecPosition.Get()[1] = fY; pInst->m_vecPosition.Get()[2] = fZ; pInst->setPosition(pInst->m_vecPosition); }, false); IWE_PROP_QUATERNION_S("Orientation (Quat)", m_quatOrientation, [pInst](float fW, float fX, float fY, float fZ) { pInst->m_stackMemUndoType.push(ENT_MEM_ROTATE); pInst->m_stackMemUndoQuat.push(pInst->getOrientation()); pInst->saveState(); pInst->m_quatOrientation.Get()[0] = fW; pInst->m_quatOrientation.Get()[1] = fX; pInst->m_quatOrientation.Get()[2] = fY; pInst->m_quatOrientation.Get()[3] = fZ; pInst->setOrientation(pInst->m_quatOrientation); }, false); IWE_PROP_LEVEL_END(); IWE_IMPLEMENT_PROP_END() We are finding an simplified way to this, without leading confusing the programmers, (will be released to the public) i find ways to achieve this but they are only available for the common scripting as Lua or editors using C#. also too portable, we can write "wrappers" for different GUI toolkits as Qt or GTK, also i'm thinking to using Boost.Wave to get additional macro functionality without creating my own compiler. The properties designed to use in the editor they are removed in the game since the save file contains their data and loads it using an simple 'load' function to reduce unnecessary code bloat may will be useful if some GameObject property wants to be hidden instead. In summary, there's a way to implement an reflection(property) system for a level editor based in properties from derived classes? Also we can use C++11 and Boost (restricted only to Wave and PropertyTree)

  Read the article

• How would you gather client's data on Google App Engine without using Datastore/Backend Instances too much?

  - by ruslan

  I'm relatively new to StackExchange and not sure if it's appropriate place to ask design question. Site gives me a hint "The question you're asking appears subjective and is likely to be closed". Please let me know. Anyway.. One of the projects I'm working on is online survey engine. It's my first big commercial project on Google App Engine. I need your advice on how to collect stats and efficiently record them in DataStore without bankrupting me. Initial requirements are: After user finishes survey client sends list of pairs [ID (int) + PercentHit (double)]. This list shows how close answers of this user match predefined answers of reference answerers (which identified by IDs). I call them "target IDs". Creator of the survey wants to see aggregated % for given IDs for last hour, particular timeframe or from the beginning of the survey. Some surveys may have thousands of target/reference answerers. So I created entity public class HitsStatsDO implements Serializable { @Id transient private Long id; transient private Long version = (long) 0; transient private Long startDate; @Parent transient private Key parent; // fake parent which contains target id @Transient int targetId; private double avgPercent; private long hitCount; } But writing HitsStatsDO for each target from each user would give a lot of data. For instance I had a survey with 3000 targets which was answered by ~4 million people within one week with 300K people taking survey in first day. Even if we assume they were answering it evenly for 24 hours it would give us ~1040 writes/second. Obviously it hits concurrent writes limit of Datastore. I decided I'll collect data for one hour and save that, that's why there are avgPercent and hitCount in HitsStatsDO. GAE instances are stateless so I had to use dynamic backend instance. There I have something like this: // Contains stats for one hour private class Shard { ReadWriteLock lock = new ReentrantReadWriteLock(); Map<Integer, HitsStatsDO> map = new HashMap<Integer, HitsStatsDO>(); // Key is target ID public void saveToDatastore(); public void updateStats(Long startDate, Map<Integer, Double> hits); } and map with shard for current hour and previous hour (which doesn't stay here for long) private HashMap<Long, Shard> shards = new HashMap<Long, Shard>(); // Key is HitsStatsDO.startDate So once per hour I dump Shard for previous hour to Datastore. Plus I have class LifetimeStats which keeps Map<Integer, HitsStatsDO> in memcached where map-key is target ID. Also in my backend shutdown hook method I dump stats for unfinished hour to Datastore. There is only one major issue here - I have only ONE backend instance :) It raises following questions on which I'd like to hear your opinion: Can I do this without using backend instance ? What if one instance is not enough ? How can I split data between multiple dynamic backend instances? It hard because I don't know how many I have because Google creates new one as load increases. I know I can launch exact number of resident backend instances. But how many ? 2, 5, 10 ? What if I have no load at all for a week. Constantly running 10 backend instances is too expensive. What do I do with data from clients while backend instance is dead/restarting? Thank you very much in advance for your thoughts.

  Read the article

• At the Java DEMOgrounds - Oracle Java ME Embedded Enables the “Internet of Things”

  - by Janice J. Heiss

  I caught up with Oracle’s Robert Barnes, Senior Director, Java Product Management, who was demonstrating a new product from Oracle’s Java Platform, Micro Edition (Java ME) product portfolio, Oracle Java ME Embedded 3.2, a complete client Java runtime optimized for microcontrollers and other resource-constrained devices. Oracle’s Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228).“What we are showing here is the Java ME Embedded 3.2 that we announced last week,” explained Barnes. “It’s the start of the 'Internet of Things,’ in which you have very very small devices that are on the edge of the network where the sensors sit. You often have a middle area called a gateway or a concentrator which is fairly middle to higher performance. On the back end you have a very high performance server. What this is showing is Java spanning all the way from the server side right down towards the type of chip that you will get at the sensor side as the network.” Barnes explained that he had two different demos running.The first, called the Solar Panel System Demo, measures the brightness of the light.  “This,” said Barnes, “is a light source demo with a Cortex M3 controlling the motor, on the end of which is a sensor which is measuring the brightness of the lamp. This is recording the data of the brightness of the lamp and as we move the lamp out of the way, we should be able using the server to turn the sensor towards the lamp so the brightness reading will go higher. This sends the message back to the server and we can look at the web server sitting on the PC underneath the desk. We can actually see the data being passed back effectively through a back office type of function within a utility environment.” The second demo, the Smart Grid Response Demo, Barnes explained, “has the same board and processor and is still using Java ME embedded with a different app on top. This is a demand response demo. What we are seeing within the managing environment is that people want to track the pricing signals of the electricity. If it’s particularly expensive at any point in time, they may turn something off. This demo sets the price of the electricity as though this is coming from the back of the server sending pricing signals to my home.” The demo had a lamp and a fan and it was tracking the price of electricity. “If I set the price of the electricity to go over 5 cents, then the device will turn off,” explained Barnes. “I can go into my settings and, in this case, change the price to 50 cents and we can wait a minus and the lamp will go off. When I change the pricing signal so that it is lower, the lamp will come back on. The key point is that the Java software we have running is the same across all the different devices; it’s a way to build applications across multiple devices using the same software. This is important because it fixes peak loading on the network and can stops blackouts.” This demo brought me back to a prior decade when Sun Microsystems first promoted  Jini technology, a version of Java that would put everything on the network and give us the smart home. Your home would be automated to tell you when you were out of milk, when to change your light bulbs, etc. You would have access to the web and the network throughout your home.It’s interesting to see how technology moves over time – from the smart home to the Internet of Things.

  Read the article

• October in Review

  - by Richard Bingham

  With OpenWorld over October was time to get back to serious work for everyone, including the Fusion Applications Developer Relations team. Don't forget the OpenWorld content is still available, including presentation downloads, for a limited period of time so be sure to grab anything you found useful or take another scan for anything you might have missed. Of all the announcements, the continued evolution of the Oracle Cloud services for extending and integrating with Fusion Applications is increasing in popularity, and certainly the Cloud Marketplace is something we're becoming involved in. More details to follow. Fusion Concepts Last week Vik from our team started the new "Fusion Concepts" series of articles, providing those new to Fusion Applications an explanation of the architectural basics, with the aim to reduce the learning curve and lay the platform for more efficient and effective development. The series begun with an insightful first post on the different schemas that exist in the Fusion Applications database. Look out for upcoming posts on multi-lingual entities, profile options, look-ups and more. New Learning Resources Our YouTube channel continued to expand with more 'how to' videos on using page composer, extending the Simplified UI (aka FUSE), and integrating BI reports and analytics. Also the Oracle Learning Library is now well established as a central resource for knowledge, now with thousands of tutorials, videos, and documents. Of particular note are the great new extensibility-related videos added by the CRM Product Management team, including more on the ever-expanding capabilities of Application Composer. To see some examples of these search using keyword 'customization' or the product 'Sales Cloud'. Finally on learning resources, as Oliver mentioned the Oracle Press book on Fusion Application Customization and Extensibility is now available for pre-order on Amazon (due out 1st Jan). Out And About October also saw us attend the annual Apps Conference held by the UK Oracle User Group in London. Interestingly there was an Applications Transformation stream of sessions and content that included Fusion Applications with all the latest in the Oracle Applications evolution, as always focused around the three tenets of social, mobile, and cloud. Read more in Richard's post-event write up. Other teams around Oracle have also been busy. Angelo from the Platform Technical Services group has done quite a bit of work using web services with Fusion SaaS and has published many interesting findings on his blog. It's definitely recommended reading if you are working on any related integration projects. The middleware-for-applications group has built a new tool called "AppAdvantage" offering an online assessment of your use of Fusion Middleware technologies with Oracle Applications. As the popularity of integrating cloud applications with on-premises systems continued to grow, leveraging existing middleware technologies (and licenses) to support the integration solution is likely to be of paramount importance. Similarly the "Build Enterprise Application Extensions with Ease" section of the related webpage has AppsUX director Killan Evers speaking about customization using the composer tools. Both are useful resources for those just getting started with a move to Fusion Applications. The Oracle A-Team, specialists in middleware technical architecture, always publish superb content via their 'chronicles' site, now with a substantial amount specifically related to Fusion Applications. Click on the Fusion Applications menu on the top right of their homepage to see more. Last month of particular note was an article on customizing the timeout pop-up message that shows to inactive users, providing design-time insight and easy-to-follow steps. Finally if you're looking at using Oracle Middleware and Cloud to tailor and extend your applications then you may also be interested in this new blog post on the roadmap for Oracle SOA and the latest on-demand Cloud Development webcast.

  Read the article

• Dynamically load and call delegates based on source data

  - by makerofthings7

  Assume I have a stream of records that need to have some computation. Records will have a combination of these functions run Sum, Aggregate, Sum over the last 90 seconds, or ignore. A data record looks like this: Date;Data;ID Question Assuming that ID is an int of some kind, and that int corresponds to a matrix of some delegates to run, how should I use C# to dynamically build that launch map? I'm sure this idea exists... it is used in Windows Forms which has many delegates/events, most of which will never actually be invoked in a real application. The sample below includes a few delegates I want to run (sum, count, and print) but I don't know how to make the quantity of delegates fire based on the source data. (say print the evens, and sum the odds in this sample) using System; using System.Threading; using System.Collections.Generic; internal static class TestThreadpool { delegate int TestDelegate(int parameter); private static void Main() { try { // this approach works is void is returned. //ThreadPool.QueueUserWorkItem(new WaitCallback(PrintOut), "Hello"); int c = 0; int w = 0; ThreadPool.GetMaxThreads(out w, out c); bool rrr =ThreadPool.SetMinThreads(w, c); Console.WriteLine(rrr); // perhaps the above needs time to set up6 Thread.Sleep(1000); DateTime ttt = DateTime.UtcNow; TestDelegate d = new TestDelegate(PrintOut); List<IAsyncResult> arDict = new List<IAsyncResult>(); int count = 1000000; for (int i = 0; i < count; i++) { IAsyncResult ar = d.BeginInvoke(i, new AsyncCallback(Callback), d); arDict.Add(ar); } for (int i = 0; i < count; i++) { int result = d.EndInvoke(arDict[i]); } // Give the callback time to execute - otherwise the app // may terminate before it is called //Thread.Sleep(1000); var res = DateTime.UtcNow - ttt; Console.WriteLine("Main program done----- Total time --> " + res.TotalMilliseconds); } catch (Exception e) { Console.WriteLine(e); } Console.ReadKey(true); } static int PrintOut(int parameter) { // Console.WriteLine(Thread.CurrentThread.ManagedThreadId + " Delegate PRINTOUT waited and printed this:"+parameter); var tmp = parameter * parameter; return tmp; } static int Sum(int parameter) { Thread.Sleep(5000); // Pretend to do some math... maybe save a summary to disk on a separate thread return parameter; } static int Count(int parameter) { Thread.Sleep(5000); // Pretend to do some math... maybe save a summary to disk on a separate thread return parameter; } static void Callback(IAsyncResult ar) { TestDelegate d = (TestDelegate)ar.AsyncState; //Console.WriteLine("Callback is delayed and returned") ;//d.EndInvoke(ar)); } }

  Read the article

• Method flags as arguments or as member variables?

  - by Martin

  I think the title "Method flags as arguments or as member variables?" may be suboptimal, but as I'm missing any better terminology atm., here goes: I'm currently trying to get my head around the problem of whether flags for a given class (private) method should be passed as function arguments or via member variable and/or whether there is some pattern or name that covers this aspect and/or whether this hints at some other design problems. By example (language could be C++, Java, C#, doesn't really matter IMHO): class Thingamajig { private ResultType DoInternalStuff(FlagType calcSelect) { ResultType res; for (... some loop condition ...) { ... if (calcSelect == typeA) { ... } else if (calcSelect == typeX) { ... } else if ... } ... return res; } private void InteralStuffInvoker(FlagType calcSelect) { ... DoInternalStuff(calcSelect); ... } public void DoThisStuff() { ... some code ... InternalStuffInvoker(typeA); ... some more code ... } public ResultType DoThatStuff() { ... some code ... ResultType x = DoInternalStuff(typeX); ... some more code ... further process x ... return x; } } What we see above is that the method InternalStuffInvoker takes an argument that is not used inside this function at all but is only forwarded to the other private method DoInternalStuff. (Where DoInternalStuffwill be used privately at other places in this class, e.g. in the DoThatStuff (public) method.) An alternative solution would be to add a member variable that carries this information: class Thingamajig { private ResultType DoInternalStuff() { ResultType res; for (... some loop condition ...) { ... if (m_calcSelect == typeA) { ... } ... } ... return res; } private void InteralStuffInvoker() { ... DoInternalStuff(); ... } public void DoThisStuff() { ... some code ... m_calcSelect = typeA; InternalStuffInvoker(); ... some more code ... } public ResultType DoThatStuff() { ... some code ... m_calcSelect = typeX; ResultType x = DoInternalStuff(); ... some more code ... further process x ... return x; } } Especially for deep call chains where the selector-flag for the inner method is selected outside, using a member variable can make the intermediate functions cleaner, as they don't need to carry a pass-through parameter. On the other hand, this member variable isn't really representing any object state (as it's neither set nor available outside), but is really a hidden additional argument for the "inner" private method. What are the pros and cons of each approach?

  Read the article

• How the SPARC T4 Processor Optimizes Throughput Capacity: A Case Study

  - by Ruud

  This white paper demonstrates the architected latency hiding features of Oracle’s UltraSPARC T2+ and SPARC T4 processors That is the first sentence from this technical white paper, but what does it exactly mean? Let's consider a very simple example, the computation of a = b + c. This boils down to the following (pseudo-assembler) instructions that need to be executed: load @b, r1 load @c, r2 add r1,r2,r3 store r3, @a The first two instructions load variables b and c from an address in memory (here symbolized by @b and @c respectively). These values go into registers r1 and r2. The third instruction adds the values in r1 and r2. The result goes into register r3. The fourth instruction stores the contents of r3 into the memory address symbolized by @a. If we're lucky, both b and c are in a nearby cache and the load instructions only take a few processor cycles to execute. That is the good case, but what if b or c, or both, have to come from very far away? Perhaps both of them are in the main memory and then it easily takes hundreds of cycles for the values to arrive in the registers. Meanwhile the processor is doing nothing and simply waits for the data to arrive. Actually, it does something. It burns cycles while waiting. That is a waste of time and energy. Why not use these cycles to execute instructions from another application or thread in case of a parallel program? That is exactly what latency hiding on the SPARC T-Series processors does. It is a hardware feature totally transparent to the user and application. As soon as there is a delay in the execution, the hardware uses these otherwise idle cycles to execute instructions from another process. As a result, the throughput capacity of the system improves because idle cycles are no longer wasted and therefore more jobs can be run per unit of time. This feature has been in the SPARC T-series from the beginning, so why this paper? The difference with previous publications on this topic is in the amount of detail given. How this all works under the hood is fully explained using two example programs. Starting from the assembly language instructions, it is demonstrated in what way these programs execute. To really see what is happening we go down to the processor pipeline level, where the gaps in the execution are, and show in what way these idle cycles are filled by other copies of the same program running simultaneously. Both the SPARC T4 as well as the older UltraSPARC T2+ processor are covered. You may wonder why the UltraSPARC T2+ is included. The focus of this work is on the SPARC T4 processor, but to explain the basic concept of latency hiding at this very low level, we start with the UltraSPARC T2+ processor because it is architecturally a much simpler design. From the single issue, in-order pipelines of this processor we then shift gears and cover how this all works on the much more advanced dual issue, out-of-order architecture of the T4. The analysis and performance experiments have been conducted on both processors. The results depend on the processor, but in all cases the theoretical estimates are confirmed by the experiments. If you're interested to read a lot more about this and find out how things really work under the hood, you can download a copy of the paper here. A paper like this could not have been produced without the help of several other people. I want to thank the co-author of this paper, Jared Smolens, for his very valuable contributions and our highly inspiring discussions. I'm also indebted to Thomas Nau (Ulm University, Germany), Shane Sigler and Mark Woodyard (both at Oracle) for their feedback on earlier versions of this paper. Karen Perkins (Perkins Technical Writing and Editing) and Rick Ramsey at Oracle were very helpful in providing editorial and publishing assistance.

  Read the article

• PASS: International Travels

  - by Bill Graziano

  Nihao!  One of the largest changes PASS is going through is the the expansion outside the US and Canada.  We’ve had international chapters and events in Europe since the early 2000’s.  But nothing on the scale we’re seeing now.  Since January 1st there have been 18 SQL Saturday events outside North America and 19 events in North America.  We hope to have three international SQLRally events outside the US in FY13 (budget willing).  I don’t know the exact percentage of chapters outside the US but it’s got be 50% or higher. We recently started an effort to remake the Board to better reflect the growing global face of PASS.  This involves assigning some Board seats to geographic regions.  You can ask questions about this in our feedback forum, participate in a Twitter chat or ask questions directly of Board members.  You can email me at if you’d like to ask a question directly.  We’re doing this very slowly and deliberately in hopes that a long communication cycle gives us a chance to address all the issues that our members will raise. After the Summit we passed a budget exception allocating an extra $20,000 for Board members to travel to local events.  I think it’s important for Board members to visit new areas and talk to more of our members.  I sent out an email asking where people had attended events outside their home city.  Here’s the list I got back: Albuquerque, Amsterdam, Boston, Brisbane, Chicago, Colorado Springs, Columbus, Dallas, Houston, Jacksonville, Las Vegas, London, Louisville, Minneapolis, New York City, Orange County, Orlando, Pensacola, Perth, Philadelphia, Phoenix, Redmond, Seattle, Silicon Valley, Sydney, Tampa Bay, Vancouver, Washington DC and Wellington.  (Disclaimer: Some of this travel was paid for by employers or Board members themselves.  Some of this travel may have been completed before the Summit.  That’s still one heck of a list!) The last SQL Saturday event this fiscal year is SQL Saturday Shanghai.  And that’s one I’m attending.  This is our first event in China and is being put on in cooperation with the local Microsoft office.  Hopefully this event will be the start of a growing community in China that includes chapters, SQL Saturdays and maybe a SQLRally or two in the future.  I’m excited to speak with people that are just starting down this path and watching this community grow. I encourage you to visit the PASS Global Growth site and read through the material there.  This is the biggest change we’ve made to our governance since I’ve been on the Board.  You need to understand how it affects you and how it affects the organization. And wish me luck on the 15 hour flight to Shanghai on Friday afternoon.  Rob Farley flies from Australia to the US for PASS events multiple times per year and I don’t know how he does it so often.  I think one of these is going to wipe me out.  (And Nihao (knee-how) is Chinese for Hello.)

  Read the article

• disks not ready in array causes mdadm to force initramfs shell

  - by RaidPinata

  Okay, this is starting to get pretty frustrating. I've read most of the other answers on this site that have anything to do with this issue but I'm still not getting anywhere. I have a RAID 6 array with 10 devices and 1 spare. The OS is on a completely separate device. At boot only three of the 10 devices in the raid are available, the others become available later in the boot process. Currently, unless I go through initramfs I can't get the system to boot - it just hangs with a blank screen. When I do boot through recovery (initramfs), I get a message asking if I want to assemble the degraded array. If I say no and then exit initramfs the system boots fine and my array is mounted exactly where I intend it to. Here are the pertinent files as near as I can tell. Ask me if you want to see anything else. # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions # CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Tue, 13 Nov 2012 13:50:41 -0700 # by mkconf $Id$ ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae Here is fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdc2 during installation UUID=3fa1e73f-3d83-4afe-9415-6285d432c133 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdc3 during installation UUID=c4988662-67f3-4069-a16e-db740e054727 none swap sw 0 0 # mount large raid device on /data /dev/md0 /data ext4 defaults,nofail,noatime,nobootwait 0 0 output of cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sda[0] sdd[10](S) sdl[9] sdk[8] sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2] sdb[1] 23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/10] [UUUUUUUUUU] unused devices: <none> Here is the output of mdadm --detail --scan --verbose ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae devices=/dev/sda,/dev/sdb,/dev/sde,/dev/sdf,/dev/sdg,/dev/sdh,/dev/sdi,/dev/sdj,/dev/sdk,/dev/sdl,/dev/sdd Please let me know if there is anything else you think might be useful in troubleshooting this... I just can't seem to figure out how to change the boot process so that mdadm waits until the drives are ready to build the array. Everything works just fine if the drives are given enough time to come online. edit: changed title to properly reflect situation

  Read the article

• Selecting the correct installer to install Oracle Weblogic Server

  - by PratikS -- Oracle

  When ever we start learning about a software product, the first step is to get the software installer and install it.Before we start with "How to install Oracle Weblogic Server?", lets understand the different kinds of installers available for Oracle Weblogic Server and select the correct installer.There are three different kinds of Weblogic server Installers: Package Installer Development-only and supplemental installers Upgrade Installer 1) Package Installer: If you have never installed Oracle Weblogic Server and this is the first time you are installing it, then what you need is a Oracle Weblogic Server's Package Installer.Again there are two different kinds of Package Installers:    a) Generic Package installer:         It does not include JAVA runtime. (When using "Generic Package installer" it is a prerequisite that a supported JDK should be installed)         If you want to install weblogic server with 64bit JVM, you have to use "Generic Package installer".         "Generic Package installer" is platform independent and can be used to install weblogic server on any supported 32bit or 64bit platform.     b) OS-specific Package installer         As the name suggests the installer is platform specific.         It is meant for installation with a 32bit JVM only.         Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. 2) Development-only and supplemental installers:         If you have no plans to use the Oracle Weblogic Server in Production and need a simple installer for testing purpose only, then use this installer.         Download the zip distribution, unzip it and its ready to use. 3) Upgrade Installer:         Upgrade installer is used to upgrade a Oracle Weblogic Server installation from one minor version to a higher minor version.         There are no installers available to upgrade Oracle Weblogic Server Installation from one major version to another, though Domain Upgrade is always available. Note:Following are the different versions of Oracle Weblogic Server in ascending order(excluding versions before WLS 9.2): WLS 9.2.x WLS 10.0.x WLS 10.3.x WLS 12.1.x Where "x" denotes the minor version, 9.2, 10.0,10.3 and 12.1 are the major versions.So you may use the upgrade installer to upgrade from WLS 10.3.1 to 10.3.6, or 10.0.1 to 10.0.2 etc.  ------------------------------------- Important links to refer: Oracle Weblogic Server Documentation Supported Configuration Installation Guide for Oracle WebLogic Server

  Read the article

• How to undo a changeset using tf.exe rollback

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,Team Foundation Utilities,TFS2010   Oh no! Did you just check in a changeset in to TFS and realized that you need to roll back the changeset because the changes were suppose to go in a different branch? Or did you just accidently merge a wrong changeset in your release branch? There are several ways to undo the damage, Manual: Yes, we all just hate this word but for the record you could manually rollback the changes. Get Specific version on the branch and chose the changeset prior to the one you checked in. After that check out all the files in the changeset and check them in. During the check in you will receive a conflict. At this point choose ‘Keep local changes’ in the conflict resolution window and check in the files. Automated: Yes, we just love it! TFS comes with a very powerful command line utility ‘tf.exe’ that gives you the ability to rollback the effects of one or more changesets to one or more version-controlled items. This command does not remove the changesets from an item's version history. Instead, this command creates in your workspace a set of pending changes that negate the effects of the changesets that you specify. Syntax tf rollback /toversion:VersionSpec ItemSpec [/recursive] [/lock:none|checkin|checkout] [/version:versionspec] [/keepmergehistory] [/login:username,[password]] [/noprompt] tf rollback /changeset:ChangesetFrom~ChangesetTo [ItemSpec] [/recursive] [/lock:none|checkin|checkout] [/version:VersionSpec] [/keepmergehistory] [/noprompt] [/login:username,[password]]   I’ll explain this with an example. Your workspace is at the location C:\myWorkspace You want to rollback changeset # 145621 C:\Workspace\MyBranch>tf.exe rollback /changeset:145621 /recursive How do i rollback/undo a series of changesets? You can also rollback a range of changesets by using the following C:\Workspace\MyBranch>tf.exe rollback /changeset:145601~145621 /recursive This will check out the files in the version control and you should be able to see them in the pending changes. Go on check them in to undo the specific changeset that you just rolled back. Do you completely want to get rid of the changeset from all future merges between the two branches? /KeepMergeHistory: This option has an effect only if one or more of the changesets that you are rolling back include a branch or merge change. Specify this option if you want future merges between the same source and the same target to exclude the changes that you are rolling back. Errors “If you get the message ‘Unable to determine the workspace.’ You may be able to correct this by running ‘tf worksapces /collection:TeamProjectCollectionUrl’” you are in the wrong directory. Make sure that you run the ‘tf rollback’ command from the directory of your workspace.   Status Exit Code Description 0 The operation rolled back all items successfully. 1 The operation rolled back at least one item successfully but could not roll back one or more items. 100 The operation could not roll back any items.   To use the command you must have the Read, Check Out, and Check In permissions set to Allow. So, have you been in a rollback undo situation before?   Share this post :

  Read the article

• Opening a new Windows from ASP.NET code behind

  - by TATWORTH

  At http://weblogs.asp.net/infinitiesloop/archive/2007/09/25/response-redirect-into-a-new-window-with-extension-methods.aspx there is an excellent post on how to open a new windows from code behind. The purists may not like it but it helped solve a problem for a client's client. Here is an update for VS2010 users: using System; using System.Web; using System.Web.UI; /// <summary> /// Response Helper for opening popup windo from code behind. /// </summary> public static class ResponseHelper {   /// <summary>   /// Redirect to popup window   /// </summary>   /// <param name="response">The response.</param>   /// <param name="url">URL to open to</param>   /// <param name="target">Target of window _self or _blank</param>   /// <param name="windowFeatures">Features such as window bar</param>   /// <remarks>   ///     <list type="bullet">   ///         <item>   /// From http://weblogs.asp.net/infinitiesloop/archive/2007/09/25/response-redirect-into-a-new-window-with-extension-methods.aspx   /// </item>   /// <item>   /// Note: If you use it outside the context of a Page request, you can't redirect to a new window. The reason is the need to call the ResolveClientUrl method on Page, which I can't do if there is no Page. I could have just built my own version of that method, but it's more involved than you might think to do it right. So if you need to use this from an HttpHandler other than a Page, you are on your own.   /// </item>   ///         <item>   /// Beware of popup blockers.   /// </item>   /// <item>   /// Note: Obviously when you are redirecting to a new window, the current window will still be hanging around. Normally redirects abort the current request -- no further processing occurs. But for these redirects, processing continues, since we still have to serve the response for the current window (which also happens to contain the script to open the new window, so it is important that it completes).   /// </item>   /// <item>   /// Sample call Response.Redirect("popup.aspx", "_blank", "menubar=0,width=100,height=100");   /// </item>   ///     </list>   /// </remarks>   public static void Redirect(this HttpResponse response, string url, string target, string windowFeatures)   {     if ((String.IsNullOrEmpty(target) || target.Equals("_self", StringComparison.OrdinalIgnoreCase)) && String.IsNullOrEmpty(windowFeatures))     {       response.Redirect(url);     }     else     {       Page page = (Page)HttpContext.Current.Handler;       if (page == null)       {         throw new InvalidOperationException("Cannot redirect to new window outside Page context.");       }       url = page.ResolveClientUrl(url);       string script;       if (!String.IsNullOrEmpty(windowFeatures))       {         script = @"window.open(""{0}"", ""{1}"", ""{2}"");";       }       else       {         script = @"window.open(""{0}"", ""{1}"");";       }       script = String.Format(script, url, target, windowFeatures);       ScriptManager.RegisterStartupScript(page, typeof(Page), "Redirect", script, true);     }   } }

  Read the article

• Two Candidates + One Job = Two Different Outcomes

  - by david.talamelli

  Recruiters have always headhunted (sidenote: I do not like this word, in general I think the type of people who use the phrase “headhunting” are the ones who are trying to sound more important than what they likely are). Any serious Recruiter engages in direct recruiting activity, it is part and parcel of the business it is not something unique. With the uptake in Social Media the past 4-5 years, we have seen an increase in the number of Recruiters proactively reaching out to people about job opportunities. We have also seen this activity increase across all levels of hire, from help desk roles to C-Level Executives. While getting approached about a role can be a nice boost to a person’s ego, do not let it give you an inflated sense of entitlement. It is The way that people handle themselves during these calls and subsequent interviews will have a large impact on their potential to land that job. Last week I spoke to two very different candidates, both about the same position and both with very different outcomes. On paper, Candidate #1 looked fantastic; they ticked many of the boxes that we were looking for. The person is working at global IT company and working in a similar role as the one we were hiring for but not in as senior as the role we had. This role would have been the perfect step to getting involved in more complex work for the person. Candidate #2 had less polished IT experience, ticked some of the boxes we were looking for and on paper in comparison to Candidate #1 was not as close a fit as Candidate #1 was. It seemed like I was comparing apples and oranges. After speaking to both candidates it turns out I was comparing apples and oranges except the person better suited for our role was not the one I was expecting it would be. The first candidate on paper looked great – they had the experience we were looking for and appeared to be just right for the role, but after talking to them, they gave me the impression that they thought the world owed them. The impression I was left with was that they did not equate success with hard work, they seemed more interested in “what is in it for me”. Rather than having a proper conversation with me, I was often cut off and asked to hurry it up when explaining our business, what we are doing, etc... . This person seemed more interested in the job title and money than how rather than think about ways to make the role successful. Candidate #2 who had limited experience, made up for any perceived lack of experience and them some with a demonstrated motivation to succeed and do the things needed to make that happen. Candidate #2 made a great first impression, they did not seem afraid of hard work and demonstrated a “team player” attitude. In talking to them they kept me engaged, listened and asked thoughtful questions that made me think this is the type of person who creates their own luck and who would thrive in a place like Oracle. Skills, capabilities, experience and a good resume can certainly get your foot in the door, but the wrong attitude or approach to work can close those opportunities just as easily. On the other hand, hard work, effort and a genuine work ethic may help open those doors that would otherwise closed for you. A resume with all the credentials gets you in the front door but that is just the beginning of the process. It is not how we start the race that is important, it’s how things end that matter most.

  Read the article

• questions about dual-boot install Ubuntu 10.04 and Windows 7 on same hard drive

  - by Tim

  I'd like to dual-boot install Ubuntu 10.04 on the same hard drive as Windows 7 which has already been installed. As to sources on the internet: I found a website iinet about dual-boot installation of Ubuntu 10.10 and Windows 7 on the same hard drive, which I think more specific than the one on Ubuntu Community without specific version of the OSes. Since I am installing Ubuntu 10.04 instead of 10.10, my question is whether their installers are same or almost same and if I can follow iinet for my dual-boot installation? Or are there better websites for information about dual-boot installtion of Ubuntu 10.04 and Windows 7? As to shrinking Windows partitions to make free space for Ubuntu partitions: iinet uses the partition software in Ubuntu's installer to shrink the Windows partition. But I saw in many website that the partition software in Ubuntu's installer cannot guarantee shrinking Windows 7 partitions successfully, so they recommended in general to shrink Windows partitions under Windows itself using its softwares. For example, in Ubuntu Community, it says: Some people think that the Windows partition must be resized only from within Windows Vista and Windows 7 using the shrink/resize option. ... If you use GParted Partition Editor in the Ubuntu Live CD be careful. So I was wondering which way to go in my situation? As to partition for bootloader files: In iinet, I don't see there is a partition created and dedicated to boot files (i.e. Grub files). However, I saw in many websites strongly suggesting using a boot partition for Grub files, especially for the purpose of separation and protection from installed OS files. I was wondering which way I should choose and why? As to installing bootloader Grub, in iinet, I see that to install Grub it only needs to specify the hard drive device for bootloader installation. However, in ubuntuguide(for more than 2 OSes and Ubuntu 9.04), some commands are needed to run in order to put Grub configuration files in MBR, and OS partition, for the chain-load process (where to find the files for the next stage). In Ubuntu Community, there are some related sentences which I don't quite understand how to do in practice: the only thing in your computer outside of Ubuntu that needs to be changed is a small code in the MBR (Master Boot Record) of the first hard disk. The MBR code is changed to point to the boot loader in Ubuntu. If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead. If you do that during the Ubuntu installation process, then Ubuntu won't boot until you configure some other boot manager to point to Ubuntu's boot sector. Windows Vista no longer utilizes boot.ini, ntdetect.com, and ntldr when booting. Instead, Vista stores all data for its new boot manager in a boot folder. Windows Vista ships with an command line utility called bcdedit.exe, which requires administrator credentials to use. You may want to read http://go.microsoft.com/fwlink/?LinkId=112156 about it. Using a command line utility always has its learning curve, so a more productive and better job can be done with a free utility called EasyBCD, developed and mastered in during the times of Vista Beta already. EasyBCD is user friendly and many Vista users highly recommend EasyBCD. In what is quoted above, I was wondering how exactly I should change the MBR code to point to the bootloader in Ubuntu? if I fail to change MBR code, are the other suggested boot managers being bcdedit.exe and EasyBCD in Windows? With the three sources above, which one shall I follow? Thanks and regards

  Read the article

• New Analytic settings for the new code

  - by Steve Tunstall

  If you have upgraded to the new 2011.1.3.0 code, you may find some very useful settings for the Analytics. If you didn't already know, the analytic datasets have the potential to fill up your OS hard drives. The more datasets you use and create, that faster this can happen. Since they take a measurement every second, forever, some of these metrics can get in the multiple GB size in a matter of weeks. The traditional 'fix' was that you had to go into Analytics -> Datasets about once a month and clean up the largest datasets. You did this by deleting them. Ouch. Now you lost all of that historical data that you might have wanted to check out many months from now. Or, you had to export each metric individually to a CSV file first. Not very easy or fun. You could also suspend a dataset, and have it not collect data at all. Well, that fixed the problem, didn't it? of course you now had no data to go look at. Hmmmm.... All of this is no longer a concern. Check out the new Settings tab under Analytics... Now, I can tell the ZFSSA to keep every second of data for, say, 2 weeks, and then average those 60 seconds of each minute into a single 'minute' value. I can go even further and ask it to average those 60 minutes of data into a single 'hour' value.  This allows me to effectively shrink my older datasets by a factor of 1/3600 !!! Very cool. I can now allow my datasets to go forever, and really never have to worry about them filling up my OS drives. That's great going forward, but what about those huge datasets you already have? No problem. Another new feature in 2011.1.3.0 is the ability to shrink the older datasets in the same way. Check this out. I have here a dataset called "Disk: I/O opps per second" that is about 6.32M on disk (You need not worry so much about the "In Core" value, as that is in RAM, and it fluctuates all the time. Once you stop viewing a particular metric, you will see that shrink over time, just relax).  When one clicks on the trash can icon to the right of the dataset, it used to delete the whole thing, and you would have to re-create it from scratch to get the data collecting again. Now, however, it gives you this prompt: As you can see, this allows you to once again shrink the dataset by averaging the second data into minutes or hours. Here is my new dataset size after I do this. So it shrank from 6.32MB down to 2.87MB, but i can still see my metrics going back to the time I began the dataset. Now, you do understand that once you do this, as you look back in time to the minute or hour data metrics, that you are going to see much larger time values, right? You will need to decide what size of granularity you can live with, and for how long. Check this out. Here is my Disk: Percent utilized from 5-21-2012 2:42 pm to 4:22 pm: After I went through the delete process to change everything older than 1 week to "Minutes", the same date and time looks like this: Just understand what this will do and how you want to use it. Right now, I'm thinking of keeping the last 6 weeks of data as "seconds", and then the last 3 months as "Minutes", and then "Hours" forever after that. I'll check back in six months and see how the sizes look. Steve 

  Read the article

< Previous Page | 822 823 824 825 826 827 828 829 830 831 832 833  | Next Page >