Search Results

Search found 5169 results on 207 pages for 'lcd displays'.

Page 83/207 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Is there an Apache error log viewer for Mac?

  - by Hassan

  I need an app that reads log files to make it easier to look through the hundreds of lines of errors that apache outputs. I've found this nice log viewer app, but it's only available for Windows. It looks like exactly what I need, except for the fact that it doesn't run on OS X. I've also looked into GoAccess, but it can only view access logs, not error logs. I also tried the Console in the utilities folder. It shows the log just as TextEdit would, it does no parsing at all. Is there an app for Mac that parses and displays errors from the apache error log?

  Read the article

• Windows 7 does not recognise second display output

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• Workaround to extend limited screen real-estate on Windows?

  - by Brian

  I need a means to use a software tool that requires at least 900 pixels of vertical resolution (as in, the "OK" button to save settings won't be reachable on smaller displays) on a laptop/projector with only 768 pixels of vertical resolution for a training session. So far the only workaround that's been suggested is to memorize the number of tab stops to reach the "OK" and "Cancel" buttons. Any suggestions on a better workaround? What I'd like to see is a utility that would let me treat the physical display as a 1024x768 view port into a larger, virtual display area. Does anything like that exist? Anything else that might help?

  Read the article

• sftp to cygwin cmd fails with "received message too long"

  - by ana

  I have a windows server running cygwin, where open-ssh is set up. I am able to ssh into the server fine. I need to run a script that I cannot amend, and which needs to copy files via sftp, and requires the shell to be cmd. However, it fails with the message "received message too long" because when cmd starts it displays the Windows banner, and sftp chokes on this. I can't find any way to disable the banner, or redirect the output, or in any way get around this problem. Does anyone know how I can fix this?

  Read the article

• Lack of Virtual Memory - confusion

  - by Wesley

  Specs ahead of time: AMD Athlon XP 2400+ @ 2.00 GHz / 1 GB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / 350W PSU / Windows XP Pro SP3 So, XP has pop-ups saying that I am low on virtual memory. However, I have a program called SmartRAM (part of Advanced SystemCare by IObit) and it displays CPU & Page File Usage and Free Physical and Virtual Memory. That program shows that I have at least 2000 MB free virtual memory on my machine when the XP pop-ups say that I'm low on virtual memory. First off, would a complete lack of virtual memory cause my computer to freeze? Secondly, how can I solve this lack of virtual memory? (A complete reformat is possible but can't be done immediately...) Thanks in advance.

  Read the article

• Macbook Pro Multiple Monitor Problem

  - by thinksocrates

  I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• Accessing localhost on my iPhone

  - by mohabitar

  I've found similarly titled questions, but none that directly address my issue. I'm running Google App Engine server on my Macbook, and it was configured to use port 8080 on localhost. And so anytime I wanted to run my site, I'd just go to localhost:8080/saveuser and everything worked fine. Now, I want to access this same site on my iPhone. I can't just do localhost on my iPhone, so I set up Web Sharing on my mac, and it's set up to http://192.168.1.106/~mohabitar. I can access this from my iPhone, but it only displays a directory of my files, and doesn't actually run the Python script. The only way my Python scripts actually run is if I do localhost:8080 on my computer. What can I do about this?

  Read the article

• Linux: How to delay hddtemp service start at boot until all hdd are visible?

  - by Atis

  I live in a hot and humid environment, therefore I monitor the hdd temperature using hddtemp and gkrellm. There is an LSI9211 8i sata/sas controller in my computer. I have drives connected to both my motherboard and the LSI. hddtemp monitors only the drives directly connected to my motherboard after booting the system, therefore gkrellm displays the temperature of those drvies only. Logging in and restarting hddtemp before starting gkrellm fixes my issue, i.e. drives connected to the LSI controller are also visible. It seems that the drives connected to the LSI controller become visible only after hddtemp is started in the boot sequence. I think delaying it would help. How can I delay the starting of hddtemp till all drives are visible? I prefer a way to check if drives are visible to the delay of a specific amount of seconds.

  Read the article

• Machine freezes when configuring dual display on Ubuntu 9.10 (karmic)

  - by sa125

  Hi - I'm trying to configure dual displays on an Ubuntu 9.10 machine. When I connect the 2 screens (1 VGA input, the other DVI), I see them in a mirrored display. I opened up Display Settings and unchecked the 'mirror screens' box, and when I clicked apply, the machine froze and I had to force restart it. This happened repeatedly for about 6 times until I gave up. How do I set it up to boot up normally with dual display working? thanks. edit: I thought it might be related to the virtual screen size, so I tried to edit /etc/X11/xorg.conf to add: SubSection "Display" Virtual 2560 1024 EndSubSection But that didn't do much. Each screen works fine on it's own, and together with mirrored display.

  Read the article

• DOMPDF generation error

  - by VDVLeon

  Hello, I have a big problem at my work. We had to make a page who displays a exercise for the users. But that page need also to be available as pdf. To do this we used DOMPDF. This worked perfectly on your development server but when we moved it to the production server dompdf generates pdf with errors. When i open the pdf i get the error from Adobe Reader: 110. The first server (development) was Debian. The production server runs CentOS 5. DOMPDF used PDFLib or CPDF, but both generate the same error. Does anybody know what kind of differents on the server i need to be aware of ?

  Read the article

• PHP-FPM not working with nginx and CentOS

  - by Daniel

  After failing to get FastCGI to work with PHP I have installed the PHP-FPM service which is reported to work out of the box, however PHP files are downloading instead of executing. This is what I have in the nginx.conf file: server { listen 80; server_name pubserver; root /usr/share/nginx/html; location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/fastcgi_params; } } The command netstat -tulpn | grep :9000 displays this which suggests PHP-FPM is running: tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1058/php-fpm.conf)

  Read the article

• Fine control over zoom and aspect ratio in VLC player

  - by ashh

  In VLC Player (v1.01), how do I zoom video and control aspect ratio with fine control, as is possible with Media Player Classic Home Cinema (MPCHC)? The standard zoom appears to only support double, normal, quarter size etc, not useful to me at all. An example: I play an older music video file that is in 4:3 aspect ratio. In MPCHC I can use the number pad to zoom in small increments until I have removed the left and right letterbox bars and the video fills the whole screen. I can also stretch and move the video in small increments until I am happy with the aspect ratio and position. I could continue using MPCHC, but I have two displays and really like VLC feature enabling full-screen video on the main screen and the VLC interface (menus etc) on the second. I have not found a way to do this on MPCHC, if anyone knows I'd also be interested to hear.

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

• Why does cd print when run in command substitution?

  - by reasgt

  If I use the 'cd' BASH built-in in a command substitution, it prints extra stuff to stdout, but only when piped to, eg., less. $ echo `cd .` # The output is a single newline, appended by echo. $ echo `cd .` | less # less displays: ESC]2;my.hostname.com - tmp/testenv^G (END) What's going on there? This behavior isn't documented in the bash man page for cd. Obviously, running just 'cd' in a command substitution is silly, but something like NEWDIR=`cd mypath; pwd` could be useful. I solved this by instead using NEWVAR=`cd mypath > /dev/null 2>&1; pwd` but I still want to know what's going on. Bash Version: GNU bash, version 3.2.25(1)-release (x86_64-redhat-linux-gnu) Copyright (C) 2005 Free Software Foundation, Inc. Distro: Scientific Linux SL release 5.5 (Boron)

  Read the article

• Conky - How to get weather alerts using rss?

  - by BeSlayed

  Quick question about how to get weather alerts with conky. I'm using the following bit of code: ${execpi 3600 ~/.conky/scripts/conky-rss.sh "http://www.weather.gov/alerts/wwarssget.php?zone=MDZ006"|sed '1,3d'|fold -sw 62} This (correctly) display a message to the effect "There are no weather alerts for ...." when there are no weather alerts. However, when there is an alert, it simply displays a message like "Short-term forecast for ..." with no further information. Any suggestions? How are other people getting weather alert info in their conkys?

  Read the article

• Redirecting X output

  - by Adam Matan

  Hi, I have a small program that checks some elements of a web service. The program shows graphics output and displays commmand-line results as well. I have been trying to automate this program to run periodically on a server in my office. Problem is, It only works when I have X enabled - either directly on the server, or via ssh -X. Following Google, I have tried Xvfb, which gave me quite cryptic error message: Xvfb :1 -screen 0 1600x1200x32 Fatal server error: Server is already active for display 1 If this server is no longer running, remove /tmp/.X1-lock and start again. Any ideas how to run it? I'm actually looking for the X equivalent of &>/dev/null... Thanks in advance, Adam

  Read the article

• How to increase video memory in libvirt/KVM gui?

  - by Dejan

  In the 'Virtual Hardware details', it lists the model as 'cirrus' with 9MB of RAM. The RAM field cannot be changed, but how to increate the video RAM? My host OS is RH6 and gust OS is Fedora16. EDIT: From guest OS, when I run xvinfo it displays 'no adaptors present'. I was trying to play a video using gstreamers xvimagesink plugin (XFree86 video output plugin using Xv extension). The problem is that xvimagesink is using hardware acceleration for video performance and hence the error Could not initialize Xv output. I guess I'll have to configure hardware acceleration for the guest.

  Read the article

• Can't change to Korean-named directory on my debian server

  - by DaLynX

  I made a rsync backup of some directories from a macbook laptop to a debian server. Some of these have korean characters (Hangeul) in their names. After fixing my server's locale, it displays well when I do a ls for instance. But I can't cd to it. Example: $ ls -1 | head ??? dirA dirB … But if try to go browse that directory: $ cd ? ? ? cd: 3: can't cd to ??? Any idea what's wrong and how to fix it ?

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• Windows 7 - can't uninstall application as admin

  - by James Atkinson

  I'm trying to uninstall Microsoft Virtual PC 2007 from my Windows 7 machine. Logged in as administrator, when I attempt to uninstall I get a messagebox stating "The system administrator has set policies to prevent this installation." Excuse me? No I haven't. Immediately following, another messagebox displays: "You do not have sufficient access to uninstall Microsoft Virtual PC 2007. Please contact your system administrator." I didn't do anything unusual when installing or setting up the software. Just normal home use computer. Any ideas on how to remove this software?

  Read the article

• Web Fonts in Firefox behind Squid

  - by sinping

  It appears as though Firefox requests web fonts (specifically Google's) in a different manner than other browsers. They fail to load when behind Squid as a result, and I'm trying to isolate why. Using this page as a reference in various browsers, Firefox noticeably displays it differently. In the Squid logs, you see hits like this: TCP_DENIED/407 3292 GET http://themes.googleusercontent.com/font? - NONE/- text/html If you load the same page with IE, you see hits like this: TCP_DENIED/407 4389 GET http://themes.googleusercontent.com/static/fonts/federant/v1/C109bUmZeyhh-vIXq9lNfvesZW2xOQ-xsNqO47m55DA.woff - NONE/- text/html So why the difference and how can we make it play nice with Firefox? This is running Squid 3.1.15, but also tested with a few other 3.1.x versions.

  Read the article

• Microsoft DNS creating subdomain when adding address record

  - by dwdet

  Hello, When attempting to add a normal A record (which has so far always worked), the Microsoft dnsmgmt app in MMC is returning a successful creation message "The host record oneworld.mydomain.com was successfully created". However, after refreshing the zone, it displays a folder icon next to "oneworld" indicating a sub domain, i.e. it is not the A record dnsmgmt said it created successfully. This is really strange behavior that has never happened previously. We have tried this on two separate PCs and remote consoled into the primary DNS server and tried adding the same A record with the same results. Any help is appreciated.

  Read the article

• Windows 7 does not recognise second display output [closed]

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >