Search Results

Search found 36810 results on 1473 pages for 'project management'.

Page 831/1473 | < Previous Page | 827 828 829 830 831 832 833 834 835 836 837 838  | Next Page >

• cdrom drive doesn't work on laptop

  - by bozdoz

  Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• Remotely start VNC server on computer with no Admin password

  - by Joe M.

  I'm trying to remotely access a particular computer of mine and it seems that VNC has stopped. I can tell that the computer is still running because I can VNC into another machine on the same network and can see my target machine under the Network section in Windows Explorer and can also ping it succesfully. To summarize: I own the target computer I am currently too far to physically access it Remote Desktop Connection feature of Windows is not enabled The computer normally runs a VNC server, but it seems to have stopped The computer is definitely on and connected to the network The computer has no password on the Admin account I can VNC into other computers on the same LAN Given these conditions how can I get into the target to open VNC server, or even just reboot the target (VNC should open on startup)? I have tried PsExec and get "access is denied", and also tried "Connect to another computer.." from the Computer Management console and also get "access is denied".

  Read the article

• How do I set up two existing disks with identical contents as a single mirrored volume in Windows 7 without losing data?

  - by Software Monkey

  I have two data disks that were, heretofore, in a mobo RAID configuration in Windows 7. They are now separate AHCI disks, visible in Computer Management. How to I go about making them a single mirrored volume in Windows? Note: The data is backed up up on two other separate disks, but it's a fair amount of work to do a restore (over 120'000 files, and I have to reset permissions). Note2: Currently the two disks are identical, and I can use the content of either one for this.

  Read the article

• PHP session files have permissions of 000 - They're unusable

  - by vanced

  I kept having issues with a Document Management System I'm trying to install as, at the first step of the installation process, it would error with: Warning: Unknown: open(/tmp/sess_d39cac7f80834b2ee069d0c867ac169c, O_RDWR) failed: Permission denied (13) in Unknown on line 0 Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/tmp) in Unknown on line 0 I looked in /tmp and saw the sess_* files have the following permissions ---------- 1 vanced vanced 1240 Jan 20 08:48 sess_d39cac7f80834b2ee069d0c867ac169c All the session files look like this. So obviously, they're unusable by PHP and it's causing me lots of problems. How can I get PHP to set the correct permissions? I've tried changing the directory which php.ini uses to /tmp/phpsessions and the same thing occurs. The directories are a+rwx.

  Read the article

• exim sending mail to wrong mail server

  - by Chris Bull

  I have recently taken over management of a server running centos and whm. It has several websites and domains running under reseller accounts. Email has always been on a server at our actual office. I have recently changed our email from our local email server to gapps for business (our local email server was pretty archaic). However, when any email is sent from the web server (such as wordpress etc) to our domain - it still routes it to the IP of our old email server. I am not very familiar with WHM or exim so don't really know how to address this. Email to other domains works fine and the gapps is working perfectly. Any help is much appreciated.

  Read the article

• Less daunting front end for SQL Server

  - by Martin

  We currently have a few users who have been using Access very succesfully to throw around large amounts of data. We've now got to the point where the data is just too large to be held in Access, as well as wanting to hold it in a single place where multiple users can access it. We have therefore moved the data over to SQL Server. I want to provide a general tool that they can use to view the data on the server and do some simple things like run queries and filters and export the data for offline manipulation. I don't want the support headaches that might come with rolling out SQL Management Studio, and neither do I want to have to create an Access database with links for each current database or ones that are created in the future. Can anyone recommend a simple tool that will connect to a server, list all the databases and allow a user to drill into a table and look at the data. Many thanks.

  Read the article

• Is it possible to live-boot VirtualBox from a USB flash drive?

  - by bw.

  To clarify, I'm not asking if you can boot from USB from within VirtualBox. I would like to make a portable version of Windows 7 that I can run from a USB drive on any machine. I'm putting a distro of Linux on my laptop, but I manage a Windows domain at work so I'd like an easier management solution than trying to use Linux tools to interface with a Windows DC(as RDP to a DC is not always an option). The reason I'm inquiring about VirtualBox... I plan on carrying this portable installation with me and using it on multiple machines, so I would like to avoid driver conflicts (which I imagine would happen if I only installed Windows on a flash drive). Basically, I need a way to boot an installation of Windows 7 from USB that still allows me to install/remove/update programs as if it were installed on a standard hard drive, and not freak out over different hardware configurations. Please help, superusers!

  Read the article

• Linux cannot alter partition table of main hard disk of my laptop

  - by djechelon

  I run openSUSE 12.2 on my ASUS N76VZ laptop. My problem is that I cannot alter the partition table of first hard disk /dev/sda1. YaST partitioner says it's unreadable, but actually it can read it but not alter it. It doesn't tell me anything else, except that I can wipe the partition table (having to reinstall Windows for the third time). Since I want to create new partitions on that disk, how do I fix the partition table layout? I could create new partition from Windows Computer Management and format them in Linux. I could do this, but it doesn't explain the problem

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• What does SQL Server do if you select more than 1 full backup when doing a restore?

  - by Rob Sobers

  I have a backup file that contains 2 backup sets. Both backup sets are full backups. When I open SQL Server Management Studio and choose "Restore..." and pick the file as my device, it lets me pick both backup sets. The restore operation completes without error, but I'm not sure exactly what SQL server did. Did it restore the first one, drop the database, and then restore the second one? Will it always let the most recent full backup prevail? It doesn't seem to make sense for SQL server to even allow you to select more than one full backup.

  Read the article

• What's better for deploying a website + DB on EC2: 2 small VM or a large one?

  - by devguy

  I'm planning the deployment of a mid-sized website with a SQL Server Standard DB. I've chosen Amazon EC2 to deploy it. I now have to choose between these 2 options: 1) get 2 small instances (1 core each, 1.7 GB of ram each): one for the IIS front-end, one for running the DB. Note: these "small instances" can only run the 32-bit version of Win2008 Server 2) a single large instance (4 cores, 7.5 gb of ram) where I'd install both IIS and the SQL Server. Note: this large instance can only run the 64-bit version of Win2008 Server What's better in terms on performance, scalability, ease of management (launch up a new instance while I backup the principal instance) etc. All suggestions and points of view are welcome!

  Read the article

• How to access both partitions on a bootable USB flash drive in Windows

  - by Maccyjam

  I have a 16GB USB Flash Drive that is partitioned into two different sizes. The first partition contains a bootable version of Ubuntu, the second partition is for general saving of files. Windows will only recognise the first partition. I have tried using Bootice but this breaks the bootable partition. Disk Management recognises the second partition but does not allow me to do anything with it. Is there a way to make both partitions accessible by Windows and keep the USB disk bootable?

  Read the article

• Windows 7 stopped booting

  - by jstawski

  I have a laptop which after shutdown it stopped booting. I tried repair, safe mode, and even start with Windows 7 Installation. The screen just goes blank with a mouse pointer that I can move around. I removed the harddrive from the laptop and connected it to my desktop using an External HD casing. The computer recognizes the disk, but it seems like it can't read it. If I go to My Computer it shows up, but it doesn't display usage information. When I double click on the drive it sits there as if it was loading something and eventually shows "G:\ is not accessible. The parameter is incorrect." Disk Management and Diskpart also take forever to load and when it does it shows the drive. My question, do you think this is a hardware problem or some corrupted sector? How can I try to fix the drive without formatting it? Thanks...

  Read the article

• no internet mail group / mail sending and delivery restrictions

  - by Jeff

  I run a win 2k8 a/d server and an win 2k8 exchange 07 server I have a group called 'No Internet Mail', i made it a distribution group. I tried to setup a transport rule on the exchange server that is configured as follows for outgoing: from a member of no internet mail and sent to users outside the organization redirect the message to administrator and send message refused, forwarded to administrator. Please talk to management for external email use. however , when i enable this it forwards everyones emails to me regardless if they are a member of the no internet mail group or not. not sure what im doing wrong, thanks in advanced.

  Read the article

• WD Elements Desktop External - Not recognised on a single computer

  - by Aelexe

  My WD Elements Desktop External is no longer recognised on my main computer. It has worked fine in the past, but now all of a sudden is not detected. It does not prompt when plugged in, nor does it show up in the disc management interface or the device manager. It appears to be aware that it is plugged in however as the light on the external blinks rapidly for a short while after being plugged in. The strangest thing however is that it works fine on other computers, including my family computers and my laptop. I have attempted to troubleshoot the issue by trying various USB devices in multiple ports on each system to see if there is any correlation with the issue, but have come up with nothing that gives me an idea of what is going on. I have also attempted to format the external using my laptop, but that has not helped either. If anyone has had a similar issue, or knows of any potential solutions, please post your advice. Thanks for your time.

  Read the article

• Type 1 Hypervisor on the desktop

  - by Blazemore

  I have a powerful home PC, and I've used VirtualBox to run Linux distros in Windows (and vice versa). I'm interested in trying out a lightweight type 1 hypervisor to run all my operating systems (Windows 7, Debian, Arch) and was looking for suggestions of which to pick and how to implement this. From what I gather, a type 1 hypervisor is a lightweight OS which simply provides VM management functionality. Will I get reasonable performance under each guest OS? Can all the guest OSs have access to a shared data drive, or is is best to have a storage server in another guest OS and mount it over the virtual network? What about gaming, is this feasible, or will I realistically need to run Win7 on bare metal? I'd appreciate any input.

  Read the article

• SQL ERROR: Verify that the instance name is correct and that SQL Server is configured to allow remote connections?

  - by scepak

  I am getting following error while connecting to my local Sql Express. An error has occurred. Details of the exception: A network-related or instance-specific error occurred while establishing a conne ction to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Serve r/Instance Specified) Unable to connect to SQL Server database. I am able to connect to Sql Server using Management Studio.

  Read the article

• Restrict only some plugins to specific sites in Google Chrome

  - by Christian

  I am looking for a way to set up Google Chrome so that it will run a certain plug-in (Java, what else?) only on whitelisted sites, but other plug-ins (like the PDF viewer) everywhere. From playing with the policies available for Chrome, I think there are basically two levels of plug-in management: List of disabled plugins/enabled plugins: Controls whether a plug-in exists for the browser at all This pair of policies applies to plug-ins, but not to sites. Default plug-in settings/Allow plug-ins on sites: Controls on which sites plug-ins can run This set of policies applies to sites, but not to individual plugins, and it cannot override the first pair. There appears to be no way to configure Chrome so that some plug-ins only run on whitelisted sites, but others run everywhere by default. I have also looked at filtering content on the firewall/proxy level, but I'm not convinced it can be done securely there. Filtering by URLs (file names) or content types can be circumvented trivially, and identification by content inspection cannot be safe either.

  Read the article

• Any Windows based OpenID servers out there? [closed]

  - by Brian Knoblauch

  I've been looking to setup an OpenID server for a special project, but haven't found any workable OpenID server software packages. Originally was looking for a *nix solution, and found several, but they all had some kind of issue. So far I've tried JOIDS, community-id, and a couple others I unfortunately can't remember the names of. I've also come to the conclusion that even if I had managed to get one of those going that the management/upgrade cycles would have placed undue burden on the company (only a couple part time sysadmins with *nix knowledge, the day to day people are primarily Windows). So, I'm hoping that there's a Windows one out that will be functional that someone knows about and will be easy for a minimal support environment...

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• First-class help desk solution? [closed]

  - by Andy Gregory

  A help desk, for larger companies is a place for centralized help within an enterprise to help the users of their products and services.Therefore,to find the solution that best fits your business requirements, it is important to research, examine, and compare help desk software. As far as I know,Hesk is an free helpdesk software with some limited features while h2desk can provide the hosted solution. But for my small business,i just need a web based help desk software which can provide ticket management and knowledge base faq. We need unlimited staff support. Maybe a freeware help desk software can not meet our needs. So,we are willing to pay for effective helpdesk solution. But it should be low cost. We have gotten two choice: iKode Helpdesk Nethelpdesk Our helpdesk team are tend to iKode Helpdesk. Any other efficient first-class help desk solution to share?

  Read the article

• Managing Windows 7 Workstations

  - by ethamoose

  There was a similar thread to this a few years back, but without any solutions. Just wondering if things have moved on since then. I'm primarily an Mac admin working in a college, but I have recently taken over responsibility for about 30 student workstations running Windows 7. For the Macs I have Apple Remote Desktop, where I can logon to machines in a session,check for any nefarious student activity and if necessary, log off or lock users out of machines. Could anyone give me a suggestion for an equivalent Windows system manager where I can do these tasks - e.g. not just a vnc client but one with more management options?

  Read the article

• What questions do I need to ask for a database sync?

  - by user65745

  I am currently helping to implement an RFID inventory management system for my company. The software that we are locked into has been at best buggy and unreliable. The software provider is now rolling out a major release. My problem is that the new software release keeps a local database on each machine that then syncs to a master database online. According to the software company we cannot do a scaled rollout because of data corruption issues between the software releases. What questions can I be asking and what sort of testing can I do on my end to make sure this software works? Any suggestions would be very helpful.

  Read the article

• "Cannot allocate memory " error whle copying data from window to ubuntu

  - by John

  I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

  Read the article

< Previous Page | 827 828 829 830 831 832 833 834 835 836 837 838  | Next Page >