Search Results

Search found 47655 results on 1907 pages for 'system restore'.

Page 837/1907 | < Previous Page | 833 834 835 836 837 838 839 840 841 842 843 844  | Next Page >

  • How to chain GRUB2 for Ubuntu 10.04 from Truecrypt & its bootloader (multi boot alongside Windows XP partition)?

    - by Rob
    I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back. I've searched fairly extensively for answers on Ubuntu forums and elsewhere but have not yet found a complete answer that covers all eventualities, scenarios and error messages, or otherwise they talk of legacy GRUB and not GRUB2. Ubuntu 10.04 uses GRUB2. My setup: Partitions: Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb /boot (Ext4, 1Gb) Ubuntu swap, 4Gb Ubuntu / (root) - main filesystem (20gb) NTFS share, 55Gb I know that the Truecrypt boot loader replaces the GRUB when boot up because I've already tried it on another laptop. I want boot loader screen to look something like the usual: Truecrypt Enter password: (or [ESC] to skip) password is for WindowsXP and on pressing [ESC] for it to find the Ubuntu grub to boot from Thanks in advance for your help. The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.

    Read the article

  • Debugging methods for Windows XP hangups

    - by Cooper
    I experience occasional 'freezes' on my desktop machine (Windows XP SP3). I've tried the normal debugging methods I know (watching Process Explorer, running ProcMon (hard to get a good trace because the hangups are so intermittent). Are there any additional system debugging methods that might be useful in discovering what would cause these hang ups? While this question is more about debugging methods than the actual issue itself (which is probably more of a superuser question), the symptoms of the hangup are: All windows become non-responding. Can be brought the foreground, but do not repaint. Taskbar/explorer windows are non-responsive Ctrl+Alt+Del, Ctrl+Shift+Esc, Win+L, do not do anything (though the actions are queued up, and when the system unhangs, they are performed) Oddly enough, usually I can still scroll through the current page I have open in Google Chrome, but I cannot change tabs. Hangup can happen when I have tons of apps open, but also when I only have Outlook, Chrome, and MS Communicator (plus all the corporate spyware). Usually the hang lasts between 30sec and 3 minutes or so. After which I can continue working as usual.

    Read the article

  • Why am I getting kicked from an IRC channel in one OS (xp) but not in the other OS (7)? [closed]

    - by moshe
    I got kicked from an IRC channel. I have Windows XP and now if I'm trying to get into this specific channel, I get inside but I get immediately kicked out. I can come in again, and again get kicked out. It seems this is done automatically. Now I have also installed, on another hard drive in the same computer Windows 7. On Windows7 I can get into this same channel and never kicked out! It's the same computer, but different operating system(separate Hard Drives). How can it be? Is the KICK command bias towards the operating system I got KICKed in? Please explain to me how this thing is happening. PS: I forgot to mention that it doesn't matter if i change my IP or my nickname, I continue to kicked out from this channel. Again, in windows 7 I can get in without a problem. another thing that is good to mention is that i got kicked out when i was using windows XP, and not windows 7. i think that it could happened also with windows 2000 and vista, so i dont bother the OS itself, but why it's acting differently with a different OS?

    Read the article

  • How are large companies handling the storing and cataloging of software installation disks?

    - by CT
    I just started working in the IT department of a small-medium sized construction company with about 200 users. One of my responsibilities is to setup and configure all new machines that come in. I would like suggestions on how to best manage the installation disks and licenses of the software that comes with them. Plus any additional licensed software such as Autocad, Photoshop, etc as well as peripheral driver disks such as printers and scanners. Right now every machine is associated and labeled with an asset id. All asset ids are kept in a spreadsheet with applicable serial numbers, current user, warranty info, and software licenses. The physical disks are then kept within a folder in a cabinet. Each folder is marked with the asset id number as well as the current user. My problems with this is that the system was not maintained very completely before I came to the company. There are plenty of software folders with no asset ids labeled on them. Plenty of missing software folders (most likely are a lot of the unlabeled folders). Folders with names but not asset ids. Machines get switched to different users without the folders and spreadsheet being updated. I am not saying this method would necessarily be bad if it was better implemented and managed, but if I am going to have to take a lot of time to fix this system currently in place. I thought I would ask the community first on how others manage this process in case there are easier, more efficient ways of doing so. Thank you.

    Read the article

  • Shrink Windows OS partition with unmovable files

    - by Tim
    I am trying to shink Windows 7 OS partition C: but cannot shrink as much as I plan due to unmovable files. I have tried Windows own defrag tool before but it does not move files that are unmovable. Here are some ideas I have learned from previous posts, and I hope at least one of them will work and wish to know the detail how to do: Inspired by this post, which suggests backup C:, then delete C: , create a smaller partition, and then copy the backup to the smaller partition. I was wondering if anyone here can confirm that Windows 7 will still work in this way? What reliable tools can be used for backuping the system, and deleting and creating partition, and then copying back the backup in this method? I am actually trying another way suggested in this post. I have identified what unmovable file currently stop further shrinking: \ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010015.wid::$DATA If I understand correctly, the file belongs to Windows Search. Can I set up somewhere in Windows system settings to temperately eliminate the file and similar ones (because there are many similar files under the same directory which I guess will also stand in the way of shrinking and unmovable by defrag)? Any other idea that might work will also be appreciated. Thanks and regards!

    Read the article

  • How to manage enterprise network of Linux machines?

    - by killy9999
    I work at the university. In my institute we have six computer laboratories used for teaching. Each lab has almost 20 computers, which gives over 100 machines total. Computers have either Windows XP or Windows 7 Eneterprise operating system. We use Symantec Ghost to manage all the computers. Each computer has a Ghost client installed, which allows to control computers over network. Every six months we restore a master image on one of the computers in a lab, update that image and distribute it over the network to all computers in a laboratory. Thanks to Ghost client this is done automatically with just a few clicks. Recently I suggested that it would be good to have Linux installed in the laboratories. The administrators were concerned that we would not be able to manage that many computers if each would have to be updated manually. The question is: how to manage such a huge network of Linux machines in an automated way? To make the description of our network more complete I'll add that all students have their accounts (about few thousand users) on a central server. These are accessed via LDAP. To use a computer in laboratory each student has to log in using his own account.

    Read the article

  • Mac OS X - Time Machine backup fails verification - What can I do to save the history?

    - by usermac75
    Hi, How do I make Time Machine to make a new complete backup without losing older versions of backed up files? Verbose: I am using the Time Machine backup on my OS X (Snow Leopard) to backup the whole computer to an external drive. I especially like the "history", i.e. the feature that allows you to restore the older version of a file. Problem: I had some data corruption on my external backup drive, I repaired it with the System Tool for doing that, it found some faults. I had the disk tool repair the external drive. After that, the external drive was OK and I could use Time Machine again. I let Time Machine do one more backup. Now I made a verification according to http://superuser.com/questions/47628/verifying-time-machine-backups, namely along sudo diff -qr . $HOME/Desktop 2>&1 | tee $HOME/timemachine-diff.log However: After doing the command above, several differences and missing files were reported, approx. 200 files in sum. Whereas some of the missing files were cache or excluded directories, the differences do bother me, especially as some important documents from me are listed as differing. How can I make sure that the data on the external drive is synced correctly? Is it possible to have Time Machine to do a complete new backup without losing the history? Or to have Time Machine compare all files for differences and re-write all files that are different? Or can I set some flags on the files that do not match to have them copied again? (like the archive-flag in Windows/Dos). I'd rather not touch the files because I would like to keep the date of last change/date of creation) Thank you for your thoughts!

    Read the article

  • Windows 7 VM log on lockout

    - by AKa
    My Windows 7 XP Mode virtual machine has just locked me out of password log on. Two years of use and it never required I use a password on wake up, I never asked for that. Suddenly yesterday, password required! I located password and used it successfully a couple of times, but now even that is not good enough! Perhaps (unfairly) because I tried to get to the bottom of the new phenomenon and removed the password from the user accounts? Permissions are still set to ok for all users. I have been all the way through the settings I can access with the VM file hibernated, and have deleted the previously saved log on info, which always previously worked automatically as charged. Now when I attempt to log on it asks me for credentials, seems like progress, but when I offer them, and check the "remember my credentials" box, I still get the splash screen "The system could not log you on. [reminder about caps...]" !! Round and round. Back up and restore point versions of the VM toss me back into the same log on loop. There are no other machines on any network, I am the administrator and sole user. It must be specifically about the log on, a speck of dust corruption ... is there a way around this? I tried creating a new VM but the black inner box gets stuck at one point requesting I insert a boot disc. Thanks for input, AKa

    Read the article

  • Strange focus bug in Firefox (chrome vs content)

    - by Marius
    Here is a strange bug I'm experiencing in Firefox: I can only use either the chrome, or the content, not both at the same time! For example, I can click on tabs and the toolbar icons, focus the search bar and write in it as well as the address bar, but if I try to click on anything in the content (eg a link or a textfield to write something), then nothing happens. The mouse pointer doesn't change either, it just stays a pointer when I hover over things, and the links I hover don't react either. But if I alt-tab to another program (or click on it in the taskbar), then back to Firefox, then I can use the area that I click on. So if I click somewhere on the webpage to get focus back to Firefox, then I can click on links and write things (like this text), but I cannot click on tabs or refresh or anything else in the chrome. I can't even click on the minimize, restore and close icons! To get focus back on the chrome I have to alt-tab to another program, and then click on the chrome to get back to Firefox to be able to use the chrome again. I've tried closing and starting it again, but the bug is still there. I have experienced this before, but I don't remember what I did to fix it. This bug seems to occur sometimes when I wake up the computer from standby, but I leave by computer in standby all the time, so that is not the only factor.

    Read the article

  • schroot build environment setup how to avoid bind-mount home

    - by minghua
    The recent linux distributions such as Fedora and Ubuntu all use chroot environment to make the build. Because when making the build often it needs to install some special tools, and to install to the existing system. Using chroot avoids making any changes to the host system. To set up such a build environment, the first step is to make a chroot. I'm following the setup guide at https://wiki.debian.org/Schroot [wheezy-test] description=Contains the SPICE program aliases=test type=directory directory=/srv/chroot/test users=jsmith root-groups=root script-config=desktop/config personality=linux preserve-environment=true In the host on my setup the /home is on /dev/mapper. When schroot is entered, the same home is bind-mounted. Is there a way to avoid this? I prefer to use a different /home inside chroot. When changing the type from directory to plain, the binding is not performed. However that also loses /proc, /sys, etc. You'd have to manually bind-mount them. That does not seem to be a good solution. If a simple configuration change is unavailable, any idea where the script is for type=directory? Probably I'll manually modify the script. Thanks in advance for any answers or hints!

    Read the article

  • I just deleted my backup file! How do I save it?

    - by Sammy
    I just accidentally deleted a backup file that I need to restore my system. It's an Acronis True Image TIB file. It was stored at H:\My backups and the name of the file was File_backup_2012-10-18.tib. I did a quick scan with Recuva 1.43.623 and it found the file using the recovery wizard, but it was unable to recover it. The "state" of the file is "unrecoverable". So the resulting file is 0 byte. I am trying to do a deep scan with Recuva right now but it takes a lot of time. If it should fail, what other recovery option do I have? Is there any other good file recovery software that's free to use for home users? I do have a second copy of the whole system partition, but I needed this file backup copy because it is more up to date. That's the file, right there! But why is Recuva unable to recover it?

    Read the article

  • Revoke directory access for a particular user in Solaris

    - by permissiontomars
    I have a need to allow directory access to a particular user on my file system. I want this user to be unable to access any other directory in my file system (initially anyway. It may need access to some directories later). For example: I have a directory called /opt/mydir. - I want my dedicated user to only be able to access this directory, and nothing else. - I want all other users to be able to access this directory as normal. I'm new to Linux and its permissions. I've read a fair bit of background material but I'm a little confused. Is there anyway to revoke permissions to /opt/mydir for a single dedicated user? A possible flawed method would be to only allow access to /opt/mydir and exclude every other user. This won't work because I want all other users to work as normal; accessing the directory. I'm working on Solaris 10. Any suggestions are appreciated.

    Read the article

  • Data recovery on working hard drive

    - by emgee
    So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

    Read the article

  • ip6tables blocking output traffic

    - by jmccrohan
    My OpenVZ VPS is blocking outbound IPv6 traffic, but correctly filtering inbound IPv6 traffic. Below is my ip6tables-restore script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 51413 -j ACCEPT -A INPUT -p udp -m udp --dport 51413 -j ACCEPT -A INPUT -m limit --limit 5/min -A INPUT -j REJECT --reject-with icmp6-adm-prohibited -A FORWARD -j ACCEPT -A OUTPUT -j ACCEPT COMMIT ICMPv6 traffic is still able to pass both inbound and outbound. When I flush these rules using -F, outbound traffic flows fine. What am I missing here? EDIT: It appears that ip6tables is marking ESTABLISHED packets as INVALID. Consequently, the outbound traffic is NOT actually being blocked. The reply packets are not allowed inbound again, hence appearing like blocked outbound traffic. Allowing INVALID packets inbound solves the outbound issue, but also renders the inbound filter useless.

    Read the article

  • What's the proper way to prepare chroot to recover a broken Linux installation?

    - by ~quack
    This question relates to questions that are asked often. The procedure is frequently mentioned or linked to offsite, but is not often clearly and correctly stated. In an objective to concentrate useful information in one place, this question seeks to provide a clear, correct reference for this procedure. What are the proper steps to prepare a chroot environment for a recovery procedure? In many situations, repairing a broken Linux installation is best done from within the installation. But if the system won't boot, how do you fix it from within? Let's assume you manage to boot into an alternate system. Once there, you need to access your broken installation in order to fix it. Many recovery How-Tos recommend using chroot in order to run programs as if you are actually booted into the broken installation. What is the basic procedure? Are there accepted best-practices to follow? What variables need to be considered in order to adapt the basic preparation steps to a particular recovery task? As this is Community Wiki, feel free to edit this question to improve it as well.

    Read the article

  • Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?)

    - by Robert
    Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?). I've just installed W8 and haven't made any changes to my new ecosystem and, what happened was that, as I was managing my new drivers, some mess* occurred, I confess, and now what I have left is every single backup tool I made use of W7, like system images, restore dvds, backup up to date monthly and so on, and would like to keep in touch with W8. I'm one of those with problems managing the amd switchable gpu drivers. Now I want to stay with W8 (download version - didn't clean install) but with my old personal files. I don't care to programs updates. I got everything original on dvds, of my interest. Yesterday I tried refreshing W8 once but didn't work. Maybe trying again tonight. What would you guys do in my place, please? *the mess I am talking about is to have disabled my intel (the only driver left) gpu in device manager tool in W8. I got black screen on system boot. Cheers, C.C.

    Read the article

  • Partition Magic 8 made TrueCrypt partition invisible

    - by gmancoda
    Partition Magic 8 took a dump on my TrueCrypt partition... and I let it happen! And now I am left with cleaning up the mess. In short, my encrypted partition is now invisible. TestDisk analysis says of the disk containing the encrypted partition: "Space conflict between the following two partitions". From the googling and searching on various sites, I have learned the following: Hex editing is beyond me. Partition recovery tools are useless. I am not ready to drop the big bucks for professional help. ... that I should have kept an external backup of the Volume header. Now, to get back the volume header, I am planning on recreating the exact same partitions on a new disk of the exact same model, and then encrypting it with the exact same password/keyfiles, and then exporting its volume header to a file. Finally, I hope to be able to restore this volume header on to my damaged drive. Before I undertake this plan, I would like to know if anyone else out there has tried it and, if so, how successful they were. All other suggestions and tips and welcome!! Thanks.

    Read the article

  • Diagnosing PC crashes (most often while using shared folders or torrents)

    - by Dyppl
    For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

    Read the article

  • BKF file corruption

    - by Naitik Semwaal
    I don't wanna ask anything here as I have nothing to ask. Instead of that, if I share some useful info here, would you guys mind? If not, then let me proceed. You must have heard about "Back up", the process in which we create backup copies of our crucial data into a file, called BKF (backup) file. Having a valid BKF file, provides security to our data against unwanted data loss or corruption. Whenever such a critical situation takes place, we can restore our BKF file and get our data back (but only if backed up earlier). Do you guys ever thought that why a BKF file gets corrupted? What could be the reasons which make the BKF file corrupted or inaccessible? One day while googling, I found a blog post named as: Reasons of BKF file corruption. I read it, it was very informative. In this blog, I came to know about the reasons for corruption in BKF files. I shared the blog here so that users can read it and clear their doubts of BKF file corruption. I hope this would be helpful.

    Read the article

  • Debian boot problems

    - by psp
    I've got Debian server with one disk. No dual boot or anything fancy. Just Debian 6.0 (Squeeze). I rebooted the server today and now it doesn't boot. I get the following (from GRUB): error: hd0,msdos out of disk I then get a grub prompt grub rescue> I've been googling for ages with no luck. /etc/fstab > #/etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > aufs / aufs rw 0 0 > tmpfs /tmp tmpfs nosuid,nodev 0 0 I've run debian rescue mode and looked through the syslog. I see hundreds of entries like this: Jun 30 22:51:08 kernel: [ 615.217382] sd 2:0:0:0: [sda] Unhandled error code Jun 30 22:51:08 kernel: [ 615.217385] sd 2:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Jun 30 22:51:08 kernel: [ 615.217389] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 30 22:51:08 kernel: [ 615.217399] end_request: I/O error, dev sda, logical block 0 Jun 30 22:51:08 kernel: [ 615.217402] Buffer I/O error on device sda, logical block 0

    Read the article

  • Copy past speed very slow for a large number of files on Windows [closed]

    - by Arno2501
    I've run the following test I've created a folder containing 15'000 files of 400 bytes using this batch : @ECHO off SET times=15000 FOR /L %%i IN (1,1,%times%) DO ( fsutil file createnew filename%%i.txt 400 ) then I copy past it on my Windows Computer using this command : robocopy LargeNumberOfFiles\ LargeNumberOfFiles2\ After it has completed I can see that the transfer rate was 915810 Bytes/sec this is less than 1 MB/s. It took me several seconds to copy 7 MBytes Please note that this is very slow. I've tried the same with a folder with a single file of 50 Mbytes and the transfer rate is 1219512195 Bytes/sec. (yeah GB/s) instantaneous. Why copying large number of files take so much time - ressources on a windows filesystem ? Please note that I've tried to do the same on a linux system which runs on the same computer in a virtual machine (vmware player) with ext3 filesystem. I use the cp command and the copy is instantaneous ! Please also note the following : no antivirus I've tested that behaviour on multiple windows computers (always ntfs) i always get comparable results (transfer rate under 1MB/s avg 7-8 seconds to copy 7 MBytes) I've tested on multiple linux ext3 system the copy is always instantaneous for that amount (15000 files of 400 bytes) The question is about understanding what makes windows filesystem so slow to copy large number of files compared to a linux one for instance.

    Read the article

  • How to ensure local file is up-to-date or ahead (dropbox sync) before truecrypt auto-mount it?

    - by user620965
    There are a lot tutorials out there that states that dropbox build-in encryption is not secure enought. That tutorials recommands to sync a truecrypt container file to have all files in it securely encrypted. This setup is know to be limited. You can NOT have that truecrypt container file mounted on the same time on more than one location - if you have inserted changes to the contents of the container in more then one location at a time then this setup produces a conflict on the container file in the dropbox system - resulting in one container file for each location. In my case that issue is not relevant - i do not use my data on more than one location at a time. I want to use the auto-mount feature of truecrypt on startup of windows 7 to have a zero configuration environment - and start working right away. But i want to ensure that the local truecrypt container file is up-to-date before truecrypt mounts it automatically - imagine you updated the contents of the container on your primary location and your secondary location was off for a long time. In that case it can take "a long time" till dropbox sync is complete (e.g. depending on your internet connection and the size of the container file). There is a option in truecrypt that ensures that truecrypt do not update the timestamp of the container file - which speeds up the sync, because dropbox client is doing a differential sync then instead of a time consuming full-sync. That is an improvement to that setup, but this do not fix my issue. The question is how to make the auto-mount function wait for the container file to be up-to-date (updated by dropbox)? In contrast: if the file was changed local, but remote file (in the dropbox cloud system) is still old (not jet updated by the sync process / or process is progress), should not make truecrypt to wait for the sync. Suggestions?

    Read the article

  • 100% CPU use when new usb device plugged in - services.exe / Windows Server 2003

    - by Will3265
    On my server I am trying to install a new usb drive but all that happens is that the system starts using huge amounts of processor cycles with services.exe. On closer inspection with process explorer there is a thread called umpnpmgr.dll using most of the services.exe processor time. I left it for a half hour and still nothing happened. Rebooted and tried again, same result. Tried a different usb drive, then a flash drive but still same issue. Tried updating driver but it said the update function was already in action. I have used process explorer to kill the thread now so the server can still perform its intended functions. Any device that was previously installed before this began happening will still work but any device new to the system will not. My question(s) is/are: Is there a way to manually install the device into the registry so Windows thinks it is a previously installed device? Or can this problem be repaired through anything other than a reinstall? To do a reinstall would mean backing up large amounts of data which is hard with a usb drive and insufficient space on all other network machines. Any help would be greatly appreciated. William

    Read the article

  • How to print PCL Directly to the printer? Vb.net VS 2010

    - by Justin
    Good day, I've been trying to upgrade an old Print Program that prints raw pcl directly to the printer. The print program takes a PCL Mask and a PCL Batch Spool File (just pcl with page turn commands, I think) merges them and sends them off to the printer. I'm able to send to the Printer a file stream of PCL but I get mixed results and i do not understand why printing is so difficult under .net. I mean yes there is the PrintDocument class, but to print PCL... Let's just say I'm ready to detach my printer from the network and burn it a live. Here is my class PrintDirect (rather a hybrid class) Imports System Imports System.Text Imports System.Runtime.InteropServices <StructLayout(LayoutKind.Sequential)> _ Public Structure DOCINFO <MarshalAs(UnmanagedType.LPWStr)> _ Public pDocName As String <MarshalAs(UnmanagedType.LPWStr)> _ Public pOutputFile As String <MarshalAs(UnmanagedType.LPWStr)> _ Public pDataType As String End Structure 'DOCINFO Public Class PrintDirect <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function OpenPrinter(ByVal pPrinterName As String, ByRef phPrinter As IntPtr, ByVal pDefault As Integer) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function StartDocPrinter(ByVal hPrinter As IntPtr, ByVal Level As Integer, ByRef pDocInfo As DOCINFO) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function StartPagePrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Ansi, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function WritePrinter(ByVal hPrinter As IntPtr, ByVal data As String, ByVal buf As Integer, ByRef pcWritten As Integer) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function EndPagePrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function EndDocPrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function ClosePrinter(ByVal hPrinter As IntPtr) As Long End Function 'Helps uses to work with the printer Public Class PrintJob ''' <summary> ''' The address of the printer to print to. ''' </summary> ''' <remarks></remarks> Public PrinterName As String = "" Dim lhPrinter As New System.IntPtr() ''' <summary> ''' The object deriving from the Win32 API, Winspool.drv. ''' Use this object to overide the settings defined in the PrintJob Class. ''' </summary> ''' <remarks>Only use this when absolutly nessacary.</remarks> Public OverideDocInfo As New DOCINFO() ''' <summary> ''' The PCL Control Character or the ascii escape character. \x1b ''' </summary> ''' <remarks>ChrW(27)</remarks> Public Const PCL_Control_Character As Char = ChrW(27) ''' <summary> ''' Opens a connection to a printer, if false the connection could not be established. ''' </summary> ''' <returns></returns> ''' <remarks></remarks> Public Function OpenPrint() As Boolean Dim rtn_val As Boolean = False PrintDirect.OpenPrinter(PrinterName, lhPrinter, 0) If Not lhPrinter = 0 Then rtn_val = True End If Return rtn_val End Function ''' <summary> ''' The name of the Print Document. ''' </summary> ''' <value></value> ''' <returns></returns> ''' <remarks></remarks> Public Property DocumentName As String Get Return OverideDocInfo.pDocName End Get Set(ByVal value As String) OverideDocInfo.pDocName = value End Set End Property ''' <summary> ''' The type of Data that will be sent to the printer. ''' </summary> ''' <value>Send the print data type, usually "RAW" or "LPR". To overide use the OverideDocInfo Object</value> ''' <returns>The DataType as it was provided, if it is not part of the enumeration it is set to "UNKNOWN".</returns> ''' <remarks></remarks> Public Property DocumentDataType As PrintDataType Get Select Case OverideDocInfo.pDataType.ToUpper Case "RAW" Return PrintDataType.RAW Case "LPR" Return PrintDataType.LPR Case Else Return PrintDataType.UNKOWN End Select End Get Set(ByVal value As PrintDataType) OverideDocInfo.pDataType = [Enum].GetName(GetType(PrintDataType), value) End Set End Property Public Property DocumentOutputFile As String Get Return OverideDocInfo.pOutputFile End Get Set(ByVal value As String) OverideDocInfo.pOutputFile = value End Set End Property Enum PrintDataType UNKOWN = 0 RAW = 1 LPR = 2 End Enum ''' <summary> ''' Initializes the printing matrix ''' </summary> ''' <param name="PrintLevel">I have no idea what the hack this is...</param> ''' <remarks></remarks> Public Sub OpenDocument(Optional ByVal PrintLevel As Integer = 1) PrintDirect.StartDocPrinter(lhPrinter, PrintLevel, OverideDocInfo) End Sub ''' <summary> ''' Starts the next page. ''' </summary> ''' <remarks></remarks> Public Sub StartPage() PrintDirect.StartPagePrinter(lhPrinter) End Sub ''' <summary> ''' Writes a string to the printer, can be used to write out a section of the document at a time. ''' </summary> ''' <param name="data">The String to Send out to the Printer.</param> ''' <returns>The pcWritten as an integer, 0 may mean the writter did not write out anything.</returns> ''' <remarks>Warning the buffer is automatically created by the lenegth of the string.</remarks> Public Function WriteToPrinter(ByVal data As String) As Integer Dim pcWritten As Integer = 0 PrintDirect.WritePrinter(lhPrinter, data, data.Length - 1, pcWritten) Return pcWritten End Function Public Sub EndPage() PrintDirect.EndPagePrinter(lhPrinter) End Sub Public Sub CloseDocument() PrintDirect.EndDocPrinter(lhPrinter) End Sub Public Sub ClosePrint() PrintDirect.ClosePrinter(lhPrinter) End Sub ''' <summary> ''' Opens a connection to a printer and starts a new document. ''' </summary> ''' <returns>If false the connection could not be established. </returns> ''' <remarks></remarks> Public Function Open() As Boolean Dim rtn_val As Boolean = False rtn_val = OpenPrint() If rtn_val Then OpenDocument() End If Return rtn_val End Function ''' <summary> ''' Closes the document and closes the connection to the printer. ''' </summary> ''' <remarks></remarks> Public Sub Close() CloseDocument() ClosePrint() End Sub End Class End Class 'PrintDirect Here is how I print my file. I'm simple printing the PCL Masks, to show proof of concept. But I can't even do that. I can effectively create PCL and send it the printer without reading the file and it works fine... Plus I get mixed results with different stream reader text encoding as well. Dim pJob As New PrintDirect.PrintJob pJob.DocumentName = " test doc" pJob.DocumentDataType = PrintDirect.PrintJob.PrintDataType.RAW pJob.PrinterName = sPrinter.GetDevicePath '//This is where you'd stick your device name, sPrinter stands for Selected Printer from a dropdown (combobox). 'pJob.DocumentOutputFile = "C:\temp\test-spool.txt" If Not pJob.OpenPrint() Then MsgBox("Unable to connect to " & pJob.PrinterName, MsgBoxStyle.OkOnly, "Print Error") Exit Sub End If pJob.OpenDocument() pJob.StartPage() Dim sr As New IO.StreamReader(Me.txtFile.Text, Text.Encoding.ASCII) '//I've got best results with ASCII before, but only mized. Dim line As String = sr.ReadLine 'Fix for fly code on first run 'If line = 27 Then line = PrintDirect.PrintJob.PCL_Control_Character Do While (Not line Is Nothing) pJob.WriteToPrinter(line) line = sr.ReadLine Loop 'pJob.WriteToPrinter(ControlChars.FormFeed) pJob.EndPage() pJob.CloseDocument() sr.Close() sr.Dispose() sr = Nothing pJob.Close() I was able to get to print the mask, in the morning... now I'm getting strange printer characters scattered through 5 pages... I'm totally clueless. I must have changed something or the printer is at fault. You can access my test Check Mask, here http://kscserver.com/so/chk_mask.zip .

    Read the article

  • Confusing Java syntax...

    - by posfan12
    I'm trying to convert the following code (from Wikipedia) from Java to JavaScript: /* * 3 June 2003, [[:en:User:Cyp]]: * Maze, generated by my algorithm * 24 October 2006, [[:en:User:quin]]: * Source edited for clarity * 25 January 2009, [[:en:User:DebateG]]: * Source edited again for clarity and reusability * 1 June 2009, [[:en:User:Nandhp]]: * Source edited to produce SVG file when run from the command-line * * This program was originally written by [[:en:User:Cyp]], who * attached it to the image description page for an image generated by * it on en.wikipedia. The image was licensed under CC-BY-SA-3.0/GFDL. */ import java.awt.*; import java.applet.*; import java.util.Random; /* Define the bit masks */ class Constants { public static final int WALL_ABOVE = 1; public static final int WALL_BELOW = 2; public static final int WALL_LEFT = 4; public static final int WALL_RIGHT = 8; public static final int QUEUED = 16; public static final int IN_MAZE = 32; } public class Maze extends java.applet.Applet { /* The width and height (in cells) of the maze */ private int width; private int height; private int maze[][]; private static final Random rnd = new Random(); /* The width in pixels of each cell */ private int cell_width; /* Construct a Maze with the default width, height, and cell_width */ public Maze() { this(20,20,10); } /* Construct a Maze with specified width, height, and cell_width */ public Maze(int width, int height, int cell_width) { this.width = width; this.height = height; this.cell_width = cell_width; } /* Initialization method that will be called when the program is * run from the command-line. Maze will be written as SVG file. */ public static void main(String[] args) { Maze m = new Maze(); m.createMaze(); m.printSVG(); } /* Initialization method that will be called when the program is * run as an applet. Maze will be displayed on-screen. */ public void init() { createMaze(); } /* The maze generation algorithm. */ private void createMaze(){ int x, y, n, d; int dx[] = { 0, 0, -1, 1 }; int dy[] = { -1, 1, 0, 0 }; int todo[] = new int[height * width], todonum = 0; /* We want to create a maze on a grid. */ maze = new int[width][height]; /* We start with a grid full of walls. */ for (x = 0; x < width; ++x) { for (y = 0; y < height; ++y) { if (x == 0 || x == width - 1 || y == 0 || y == height - 1) { maze[x][y] = Constants.IN_MAZE; } else { maze[x][y] = 63; } } } /* Select any square of the grid, to start with. */ x = 1 + rnd.nextInt (width - 2); y = 1 + rnd.nextInt (height - 2); /* Mark this square as connected to the maze. */ maze[x][y] &= ~48; /* Remember the surrounding squares, as we will */ for (d = 0; d < 4; ++d) { if ((maze[][d][][d] & Constants.QUEUED) != 0) { /* want to connect them to the maze. */ todo[todonum++] = ((x + dx[d]) << Constants.QUEUED) | (y + dy[d]); maze[][d][][d] &= ~Constants.QUEUED; } } /* We won't be finished until all is connected. */ while (todonum > 0) { /* We select one of the squares next to the maze. */ n = rnd.nextInt (todonum); x = todo[n] >> 16; /* the top 2 bytes of the data */ y = todo[n] & 65535; /* the bottom 2 bytes of the data */ /* We will connect it, so remove it from the queue. */ todo[n] = todo[--todonum]; /* Select a direction, which leads to the maze. */ do { d = rnd.nextInt (4); } while ((maze[][d][][d] & Constants.IN_MAZE) != 0); /* Connect this square to the maze. */ maze[x][y] &= ~((1 << d) | Constants.IN_MAZE); maze[][d][][d] &= ~(1 << (d ^ 1)); /* Remember the surrounding squares, which aren't */ for (d = 0; d < 4; ++d) { if ((maze[][d][][d] & Constants.QUEUED) != 0) { /* connected to the maze, and aren't yet queued to be. */ todo[todonum++] = ((x + dx[d]) << Constants.QUEUED) | (y + dy[d]); maze[][d][][d] &= ~Constants.QUEUED; } } /* Repeat until finished. */ } /* Add an entrance and exit. */ maze[1][1] &= ~Constants.WALL_ABOVE; maze[width - 2][height - 2] &= ~Constants.WALL_BELOW; } /* Called by the applet infrastructure to display the maze on-screen. */ public void paint(Graphics g) { drawMaze(g); } /* Called to write the maze to an SVG file. */ public void printSVG() { System.out.format("<svg width=\"%d\" height=\"%d\" version=\"1.1\"" + " xmlns=\"http://www.w3.org/2000/svg\">\n", width*cell_width, height*cell_width); System.out.println(" <g stroke=\"black\" stroke-width=\"1\"" + " stroke-linecap=\"round\">"); drawMaze(null); System.out.println(" </g>\n</svg>"); } /* Main maze-drawing loop. */ public void drawMaze(Graphics g) { int x, y; for (x = 1; x < width - 1; ++x) { for (y = 1; y < height - 1; ++y) { if ((maze[x][y] & Constants.WALL_ABOVE) != 0) drawLine( x * cell_width, y * cell_width, (x + 1) * cell_width, y * cell_width, g); if ((maze[x][y] & Constants.WALL_BELOW) != 0) drawLine( x * cell_width, (y + 1) * cell_width, (x + 1) * cell_width, (y + 1) * cell_width, g); if ((maze[x][y] & Constants.WALL_LEFT) != 0) drawLine( x * cell_width, y * cell_width, x * cell_width, (y + 1) * cell_width, g); if ((maze[x][y] & Constants.WALL_RIGHT) != 0) drawLine((x + 1) * cell_width, y * cell_width, (x + 1) * cell_width, (y + 1) * cell_width, g); } } } /* Draw a line, either in the SVG file or on the screen. */ public void drawLine(int x1, int y1, int x2, int y2, Graphics g) { if ( g != null ) g.drawLine(x1, y1, x2, y2); else System.out.format(" <line x1=\"%d\" y1=\"%d\"" + " x2=\"%d\" y2=\"%d\" />\n", x1, y1, x2, y2); } } Anyway, I was chugging along fairly quickly when I came to a bit that I just don't understand: /* Remember the surrounding squares, as we will */ for (var d = 0; d < 4; ++d) { if ((maze[][d][][d] & Constants.QUEUED) != 0) { /* want to connect them to the maze. */ todo[todonum++] = ((x + dx[d]) << Constants.QUEUED) | (y + dy[d]); maze[][d][][d] &= ~Constants.QUEUED; } } What I don't get is why there are four sets of brackets following the "maze" parameter instead of just two, since "maze" is a two dimensional array, not a four dimensional array. I'm sure there's a good reason for this. Problem is, I just don't get it. Thanks!

    Read the article

< Previous Page | 833 834 835 836 837 838 839 840 841 842 843 844  | Next Page >