Search Results

Search found 5124 results on 205 pages for 'clean'.

Page 84/205 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• Windows 7/Outlook 2010 cut off controls on form windows

  - by D..

  I am running windows 7 with multiple monitors. 2 at 1920 x 1200 and 1 at 1600x900 resolution. Controls are cut off and I cannot view the entire content of the window. As far as I can tell I only have the issue with Outlook 2010, it may be present in other applications but I haven't noticed it. For example to get to the more settings button I have to use tab and then click enter. The more settings button is never visible. I have used applications that allow you to force windows to be resizable, however the anchoring is such that it remains cut off. This has been present over multiple clean installs on the system. My DPI is set to 100% unlike this issue.

  Read the article

• Reducing CPU load to absolute minimum [on hold]

  - by user191338

  I have had a couple of things gone missing I believe stolen in my shared apartment and want to run my laptop constantly with a webcam attached, running webcam surveillance software to record/ take pictures when motion is sensed. Id like to take whatever steps are necessary to be able to run the laptop constantly without the fan coming on, as its quite loud and even though it will be hidden it can be heard. Thus Id like to know what steps I can take to reduce CPU to the bare minimum for the laptop to boot up and run the camera software and send images via ftp / email when necessary. I have windows 7 installed, though I can reinstall it clean. Which are the windows services can I turn off, and more extreme disabling or measures of whatever kind which I can take. The OS would need to run the camera, wifi / networking. Thanks very much for any help.

  Read the article

• Enable 8th bit as Meta in zsh without a warning

  - by Bostonvaulter

  In my quest to configure my shell to work exactly how I want it with respect to the alt/meta key I am having some trouble. Recently I added "bindkey -m" to my .zshrc and now whenever I start a zsh shell (ie open a terminal window) I get this error "warning: `bindkey -m' disables multibyte support". Now since I don't care much about multibyte support atm, is there a way I can disable just this warning? Even better would be a way to use 8th-bit meta as well as multibyte. Also note that this happens on a clean zsh install on 4.3.9 and 4.3.10 My reasoning for wanting bindkey -m vim: alt mappings (my own personal commands/mappings) zsh: alt mappings (such as Alt-. to recall the last argument of the previous command) emacs: alt mappings (lots of built-ins) So, is there any way to disable this warning or otherwise accomplish what I'm trying to do?

  Read the article

• Installing Drupal: Database configuration problem.

  - by abelenky

  I am trying to install Drupal 6.16 on a clean website. I get through the "Verify Requirements" page easily. On the Database Configuration, I supply all the proper info, but "Save and Continue" returns me back to the same page, with no error message. I am unable to proceed past this point. I've verified my info with the ISP, including a non-local database host (under Advanced Options), and that the database user has full DBA rights. The lack of an error message is particularly frustrating. Do you have any ideas what the problem is, or how to pursue it and resolve it?

  Read the article

• Strange issue with 64 bit OS

  - by Sherwin Flight

  So I own two versions of Windows 7, one is 32 bit, the other is 64. The 64 bit version came with my new desktop, and the 32 bit version came with my Laptop. I was doing a clean install of my laptop, and the install went smooth, Windows is up and running! However, after installing it I realized that I accidentally used the 64 bit installation disk instead of the 32 bit version. I confirmed this in the System Information screen, it says: System type: 64-bit Operating System As far as I knew this laptop was only a 32 bit machine. My understanding is that a 64 bit OS would NOT run on 32 bit architecture. Am I correct with this assumption? If this was a 32 bit laptop is there any way a 64 bit OS would even run at all on it?

  Read the article

• Free duplicate music finder for Mac.

  - by Jack M.

  I'm trying to clean up an mp3 folder which has a plethora of duplicate files in it due to accidentally dragging my music folder into iTunes and having it re-import songs which were already in the play list. I tried writing a quick Python app to md5 all of the files, and delete exact duplicates. This took out ~2gb of files. Unfortunately, however, this does not work on all of the duplicates because of an iTunes feature. iTunes has changed the ID3 title on some of the duplicate songs, which means the md5 of the entire file is different from the same song with a different ID3 tag. Are there any free applications out there (for the mac) which can compare the data of the actual song (ignoring ID3 tags) and determine if duplicates exist?

  Read the article

• page up/down print ~ instead of history search in terminal

  - by Desmond

  I am on a Macbook Pro with mac os x 10.8.2 I have set: page up: \033[5~ page down: \033[6~ in terminal keyboard settings (pressing esc to get \033). My ~/.xinputrc is: # Be 8 bit clean. set input-meta on set output-meta on set convert-meta off # Auto completion options set show-all-if-ambiguous on set completion-ignore-case on # Keybindings "\e[1~": beginning-of-line # Home key "\e[4~": end-of-line # End key "\e[5~": history-search-backward # Page Up "\e[6~": history-search-forward # Page Down "\e[3~": delete-char # Delete key "\e[5C": forward-word # Ctrl+right "\e[5D": backward-word # Ctrl+left I am just following a guide found on internet (actually there are a lot of guide really similar): http://macimproved.wordpress.com/2010/01/04/fix-page-updown-home-end-in-terminal/ Unfortunately, the only (terrific) result is that when I press page up (fn + up arrow) just a "~" is printed in the terminal.

  Read the article

• java for freebsd

  - by rawman

  I am trying to install java on freebsd 7.X and i have done following thing so far download the tar file from this link and store the file in cd /usr/ports/distfiles/ after that i run cd /usr/ports/java/diablo-jre16 or cd /usr/ports/java/diablo-jdk16 make config install clean and uncheck all the options in config screen now after doing all this now i am getting following message to indicate for amd version even if my server is using intel Core2Quad Q9550 2.83 GHz mail# make install === Vulnerability check disabled, database not found === License check disabled, port has not defined LICENSE === Found saved configuration for diablo-jdk-1.6.0.07.02_12 Because of licensing restrictions, you must fetch the distribution manually. Please access http://www.FreeBSDFoundation.org/cgi-bin/download?download=diablo-caffe-freebsd7-amd64-1.6.0_07-b02.tar.bz2 with a web browser and "Accept" the End User License Agreement for "Caffe Diablo 1.6.0". Please place the downloaded file(s) in /usr/ports/distfiles. * Error code 1 Stop in /usr/ports/java/diablo-jdk16. mail# (as before i was getting error for tzupdater so i downloaded tzupdater-1_3_29-2010f.zip and put it in a cd /usr/ports/distfiles/ folder)

  Read the article

• CD-R suddenly unreadable?

  - by TheD

  I have a CD-R which has worked fine for a good while. All of a sudden, Windows can no longer read its data. It's not scratched, it's clean and Windows can detect the disk and usage of space on it. But whenever I attempt to access the data stored: Explorer crashes Or after 5-10 mins of trying to read it, it opens up and just shows a desktop.ini file in Explorer. This happens on multiple machines. Any ideas? Is there a way to recover the data? For example - some sector by sector recovery software if any exist for CD's?

  Read the article

• How to delete "System Volume Information" folder from external drives?

  - by Nadude

  I'm running Vista Prof 32bit on a lenovo w500 thinkpad. I have four external drives and use 4 different PCs, that all have system volume information folders, taking up lots of space, and I can't delete them. I don't even know which computer's files are backed up on which external. I've used Thinkvantage rescue and recovery to delete all backups, as well as checked system restore settings to only use my main C drive. I checked all the PC's to ensure only the Main drive keeps system restore points and deleted previous versions. I ran Disc Clean up too. But I can't figure out how to get rid of these large folders from my external drives.

  Read the article

• Possible to change the order of the shortcut locations in windows explorer

  - by Codezilla

  When you open a new explorer window by default it loads from the starting position "Computer" which shows your drives, etc. This is all well and good except when explorer loads it bumps the scroll bar down so that half the favorites are cut off. I can scroll up to get to the ones I want but that gets really old doing that 50 times a day. I do clean out my favorites frequently but more are added all the time and used. In trying to come up with a fix for this problem I thought maybe it would be possible to move the link to "Computer" to be at the very top and the "Favorites" area directly under that but I can't figure out a way to do that. Anyone have an idea? Or maybe another solution I haven't thought of?

  Read the article

• Why does my laptop shut down, does it get too hot?

  - by Kevin P.

  When I play games, or use powerful-applications such as Autodesk Maya, my laptop just shuts down, ofcourse without any warning at all. This is what I've tried so far: Cleaned my fan, completely! Checked if I have enough RAM and good enough graphics card, and I do. (6 GB RAM, Nvidia GeForce GT540M with 2 GB VRAM) None of these options worked. Even tried to clean my fan twice! Now, I have some options I could also try, but I don't know if that have anything to do with it or not. I was thinking reinstalling my Windows 7, because maybe it has to do something wrong with the installation? My laptop is about a year old, and this problem just happend out of no where, short after I downgraded from Windows 8 Release Preview to my original Windows 7.

  Read the article

• Will my RAID0 stay intact when I move it to a new computer?

  - by Jeremy H

  My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

  Read the article

• How can I automate restarting a vmware vm

  - by Stu

  I have a vm that does nothing but run magic jack. Magic jack doesn't run perfectly in a vm. It works great for days then randomly the vm reboots. except it doesn't come up clean. It gets to the windows splash screen and hangs spinning the cpu. I don't care how I solve the problem (although not crashing in the first place would be ideal) but I just need the vm to reboot cleanly when it does crash. Is there a windows registry setting I can say "on crash, reboot" or something like that?

  Read the article

• Songbird too damn slow, at least on my mac

  - by Cawas

  I've read on few places that Songbird is no good with more than some thousands of library items because it starts getting quite slow. Well, in my case (which is a clean install) I've imported 17k items (which I know is not that much) and instead of becoming just too slow it frequently gets to not responding for several minutes until getting back to its senses again. That's for whichever random operation such as deleting 1 item from library. I've also read on few more places that gives very little hope on fixing this issue, but I wonder... Is there any way to tweak it and make it work as fast as expected? Am I missing something or is this just a complete and utterly useless piece of software for libraries with more than 10 thousand thingies?

  Read the article

• Missing 16:10 resolutions with Nvidia drivers (Can't add resolutions)

  - by Wuinny

  Hello, I have a laptop with a Nvidia 9650M GT and used the drivers that Seven brought me. It works fine but Metro 2033 tells me that i have to upgrade my drivers to play the game. So i did it. But since i did a clean install of the new Nvidia drivers, i just have 1440*900 or 4:3 resolutions. I usually played with 1280*800 or 1184*740 (for performance issue) With the "old" drivers i was able to create custom resolution (1184*740) in Nvidia control panel but now when i try it tells me that "my monitor cannot support this resolution". When i insist, it works but soon as i shut down my computer i have to recreate it.. Do anyone have a fix ? Thank you

  Read the article

• Does OEM partition stores Windows 7 serial key ?

  - by Mahesha999

  Does OEM partition stores the serial key which is grabbed by the Win 7 setup done from the disk provided with laptop. I realized that when you install clean system from Windows 7 disk you get with laptop, it grabs the serial key or it doesn't ask one. So from where it gets that serial key. Is it the OEM partition or anything else? Or the recovery partition stores the key? What all the things these two partitions do store in them?

  Read the article

• Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

  - by Alex

  had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

  Read the article

• Infected Win XP disk not openable on a Vista computer

  - by Retired57

  How can I read a WinXP partioned disk that is infected and shows up on a USB connection to Win Vista computer as a single partition that Vista cannot see the contents? The XP computer HDD is partioned into 4 partitions. It became infected, and all attempts to clean it have failed. Applications begin to launch, but are then shut down by the infecting agent. Using a major Anti-virus Co. boot disk (which was unable to connect to the Web, probably because the infecting agent stopped it) with virus definitions dated after the disk became infected, the resultant scan showed no infection. I bought a USB cable to connect the IDE drive to my Vista computer, but when I open Win Explorer, it sees the disk, but does not show any contents. It indicates it is a single partition that is valid. However in all the ways I have tried it does not show drive contents. Any suggestions on what to do next?

  Read the article

• What does the the reconstruction process of mdadm do exactly on raid10

  - by Azrael

  I've got a system with 4 disks set up as raid10. All disks are usable, and mdadm all states them with UUUU. Due to a recent system crash, the raid is currently reconstruction the raid as it was marked as "not clean," and a reconstruction process was started. On a closer look smartctl shows problems on one disk: sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 24 cd 78 d4 sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed sd 0:0:0:0: [sda] CDB: Read(10): 28 00 24 cd 75 1e 00 04 00 00 With a research about the reconstruction process, I only found information concerning raid5 but nothing for raid10. Can I replace this problematic disk during the reconstruction process, or will I kill the raid with this?

  Read the article

• PC Speaker sounds when machine locks up.

  - by d.c

  What would cause my PC speaker to sound a low frequency continuous tone as my system locks up? Generally what will happen is I'll notice the application I'm using will stop responding but explorer will be partially responsive, then after a few more actions explorer stops responding, and the last click will cause the pc speaker to emit a low constant tone as the machine locks up completely. The only resolve at that point is to restart. Its not a thermal issue, I'm reading the cpu, and hdd temps with software and hardware monitors. AV and malware scans come up clean. I've swapped out my ram, reseated all my components. Used sfc with no results. chkdisk locks up at 3% and defragmenting does the same, but I can read the drive without trouble (I know this as I've done av/malware scans and I also backed everything up since this started happening) I'm mostly just interested to learn, if anyone knows, why the pc speaker would sound during the lock up. windows xp sp2

  Read the article

• Two users using the same same user profile while not in a domain.

  - by Scott Chamberlain

  I have a windows server 2003 acting as a terminal server, this computer is not a member of any domain. We demo our product on the server by creating a user account. The person logs in uses the demo for a few weeks and when they are done we delete the user account. However every time we do this it creates a new folder in C:\Documents and Settings\. I know with domains you can have many users point at one profile and make it read only so all changes are dumped afterwords, but is there a way to do that when the machine is not on a domain? I would really like it if I didn't have to remote in and clean up the folders every time.

  Read the article

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• Port forwarding with DNAT and SNAT without touching other packets

  - by w00t

  I have a Linux gateway with iptables which does routing and port forwarding. I want the port forwarding to happen independent of the routing. To port forward, I add this to the nat table: iptables -t nat -A "$PRE" -p tcp -d $GW --dport $fromPort -j DNAT --to-destination $toHost:$toPort iptables -t nat -A "$POST" -p tcp -d $toHost --dport $toPort -j SNAT --to $SRC $PRE and POST are actually destination-specific chains that I jump to from the PREROUTING and POSTROUTING chains respectively so I can keep the iptables clean. $SRC is the IP address I'm SNATing to which is different from the gateway IP $GW. The problem with this setup is that regular routed packets that were not DNATed but happen to go to the same $toHost:$toPort combo will also be SNATed. I wish to avoid this. Any clever things I can do?

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >