Search Results

Search found 4886 results on 196 pages for 'geeks on hugs'.

Page 84/196 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Slides, Code, and Photos from SPTechCon San Francisco 2011

    - by Brian Jackett
    Note: Updated 2/12/11 with links to both presentation materials.     This past week I presented two sessions at SPTechCon San Francisco 2011.  The first session was “The Expanding Developer Toolbox for SharePoint 2010” which .  Thanks to all of my attendees for this session.  They had so many great questions that we ran out of time before covering all of the planned material.  Especially for them I’ve provided the slides and code samples to walk through them on their own.     The second session was “Real World Deployment of SharePoint 2007 Solutions”.  In talking with attendees before the session many were looking for 2007 content.  At the conference SharePoint 2010 was represented much more heavily than 2007, so I was glad to fill a need in the community. Slides and Code   Click here for “The Expanding Developer Toolbox for SharePoint 2010” materials   Click here for “Real World Deployment of SharePoint 2007 Solutions” materials Photos Pictures on FaceBook   Click here Pictures on Windows Live (higher res)     SPTechCon San Fran Feb 2011 VIEW SLIDE SHOW DOWNLOAD ALL Side Trips     Aside from the conference itself I also got to take a few side trips during the nights.  A special thanks to Dux Raymond Sy (Twitter) for organizing a Mongolian Hot Pot dinner on Monday (see pictures) and Michael Noel (Twitter) for organizing a Korean bbq dinner on Tuesday (again see pictures).  These were both new experiences for me and I thoroughly enjoyed the time with friends and trying something new.  Another thanks to Mark Miller (Twitter) for giving a personal tour around various sites of San Fran to myself and a few others.  It was great hearing the backstory of different neighborhoods and buildings from someone who had lived in the area for years.  Overall a great addition to the conference itself. Conclusion     This is the 3rd SPTechCon I’ve attended and the conference is getting better with each iteration.  The fine folks at BZ Media should be proud of the effort they’ve put in.  The next SPTechCon will be in Boston in June.  As of right now I won’t be attending that one but I highly recommend anyone to go if you have the chance.         -Frog Out

    Read the article

  • Learn to Take a Punch, Learn to Counter, Keep Moving Forward

    - by D'Arcy Lussier
    Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/10/28/154483.aspxDuring a boxing workout a few months ago our trainer had us do something called “breadbaskets”. That’s where you hold your arms up and a partner punches you in your midsection – your breadbasket. I put my arms up, and braced for impact. The trainer came over, saw I was a bit nervous, and coached me through. I can see the fear in your eyes. Don’t be afraid to take the punch. Tighten your core, breathe through the hit. Don’t panic. Over the summer we’d do counter drills as well. This is where a partner throws a punch, you defend but also throw one back – a counter punch. You never just sit back and take a beating, you deflect the blow and come back with one more powerful. These lessons on fighting can apply to all aspects of our lives and any attempts at success that we have. I saw this image recently and agree with it 100%: Success is never a straight forward line. It’s messy, its wrought with failures, its learning over time and applying those life lessons. It’s learning how to take punches and lose your fear, its seeing a punch coming and countering it, but most of all its not giving up and continually moving forward. We do stairs at boxing, which is running up and down three flights of stairs. I’m not anywhere near incredible shape and after doing multiple stairs in a single workout you can feel gassed, tired, even discouraged after hitting the second floor and seeing everyone else running by you. I read a quote from Martin Luther King Jr. that I cling to throughout my day: You want to be successful? Take the punches, but learn how to take them. Counter them. and no matter what, always move forward.

    Read the article

  • South Florida Code Camp 2011 - 02/12/2011 - Final Days to register

    - by Nikita Polyakov
    South Florida Code Camp - 02/12/2011 - Final Days to register 13 tracks, 78 sessions, 65 speakers Topics include: Windows Phone 7, Silverlight, Web dev, Architecture/Agile, Sharepoint and SQL Networking with 700 other software developers, over 800 already registered! Free breakfast and lunch Hobnob with speakers, MVP's and authors Party afterwards with attendees and speakers Convenient location at Nova University in Davie Free XBOX 360 Kinect 250 GB raffle (must be present) Free raffle of valuable software, books and swag Free Code Camp T-shirt Book swap - see site for details You get to say "I was there!" More information: http://www.fladotnet.com/codecamp   Register now at: https://www.clicktoattend.com/invitation.aspx?code=150628 (some people have had a problem with this link but click again and it should work). I am presenting Windows Phone Marketplace session. Marketplace and Monetization Details of Windows Phone Marketplace and using Microsoft Advertising SDK control. Monetization strategies, rules and tips for making the best out of your post writing the Windows Phone app experience. Many speakers end up hanging out in the back and this session turns into a open discussion panel.

    Read the article

  • SharePoint 2010 Hosting :: HTTP Error 503. The Service in Unavailable.

    - by mbridge
    Error Message: HTTP Error 503. The service in unavailable. The application pool is shutdown and the Event Viewer indicates: Log Name:      Application Source:        Microsoft-Windows-User Profiles Service Date:          4/24/2010 4:58:28 PM Event ID:      1500 Task Category: None Level:         Error Keywords: User:          GUERILLA\spapppool Computer:      SPS2010RTM.guerilla.local Description: Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly. DETAIL – Unspecified error Solution: Option 1 – Log on locally with the service account once to create a local profile for it. Option 2 - Modify the application pool by going into IIS > Application Pools > Right-Click offending app pool > Advanced Settings > Set “Load User Profile” to False. Give it try!! Good luck!!

    Read the article

  • Why does my browser take me to Scour.com? (redirect virus)

    - by Paula DiTallo
    The "scour" or Rootkit.Win32.TDSS virus has a long history which can be found here: http://en.wikipedia.org/wiki/Scour Here is the primary symptom: after searching for something in your web browser using google, one of the results that you click on redirects you to scour.com. If you've executed ClamWin, Malwarebytes, McAfee, Norton, etc. to find and isolate the virus without any luck--this isn't really a surprise, since this virus attaches to existing system drivers. I only know of one reliable package that will remove this without ill effects--like adding new spyware. This package is called TDSSKiller. I have seen multiple websites that claim to have this software available, but the one that I know is reliable is located here: http://support.kaspersky.com/viruses/solutions?qid=208280684 Once you go to Kaspersky's tech support site, the TDSSKiller zip file is available for downloading. When you execute this software, you will be able to "cure" or repair the infected driver. Remember to jot down the name of the driver for future reference--should you need to reinstall the driver from a "same-as" working computer, or your install disk if the repair is ineffective. The driver that happened to get infected on my computer was the tcpip.sys driver. This caused my win sockets to loose their ip addresses. In most other instances, less critical drivers such as HDAudBus.sys are infected. In my case, I was not through correcting my computer problems until I corrected the broken WinSock issue and loaded an earlier version of the tcpip.sys driver from: C:\WINDOWS\ServicePackFiles\i386 which I placed in: C:\WINDOWS\system32\drivers Don't forget to reboot your computer after your repair! Once you download TDSSKiller and cure/repair your infected driver(s), the redirect on google searches should disappear .

    Read the article

  • ASP.NET 4 Hosting :: How to set up Forms Authentication for your ASP.NET web site

    - by mbridge
    Please follow this steps: 1. Log in to your Control Panel. 2. From the menu, select Databases ? SQL Server 2008. 3. Click the Create User button. 4. Enter a user name and password and click Save. In this demonstration, the user name is dotnetuser and the password is dotnetuserpass. 5. Click the Create Database button. 6. Enter a database name and grant access to the user you created above and click Save. In this demonstration the database is called DotNetAuthentication. 7. Locate and run the ASP.NET SQL Server Setup Wizard. This file is located in your .NET framework directory and is named aspnet_regsql.exe (example: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regsql.exe). 8. Click Next and choose Configure SQL Server for application services. 9. Click Next and enter the server name and database log in credentials. The server name is the web site pointer address to where your application will be published and the log in credentials are the SQL server user name and password created earlier. 10. Click Next twice and the wizard will take a moment to complete the scripting actions that populate the new database with all the objects necessary to configure the ASP.NET provider.  Once complete, click Finish to close the wizard. 11. Finally, modify the web.config file in your ASP.NET web application to use the database you created.

    Read the article

  • More Changes...

    - by MOSSLover
    Stuff has changed drastically for me in the past two to three years.  I moved over 1000 miles from Saint Louis.  I go outside and I get up in front of crowds with less issues.  Now I'm changing jobs again.  I'm not really sure what to say here.  I was obviously unhappy and I needed to do something different.  So quit two days ago and I guess it worked out that I end with B&R this Friday, then head to TEC and SPS Huntsville and a week from this Monday I start my new job at Gig Werks.  I'm not sure what to expect or where I'm heading, but I think it's a step in the right direction.  I won't really know what kind of impact this will have on my life for at least another 6 months to a year. For some reason I can't sleep tonight and I think it's really a reflection of my last day.  Tomorrow is an ending and a beginning at the same time.  So it's both kind of sad and exciting.  I don't know why I'm really excited to go to Disney Land for the second time ever in my life time.  I get to ride the Teacups.  For the longest time when I was a kid I wanted to go to Disney Land.  I wanted to ride the teacups.  In 2007, at the age of 25, I rode the teacups for my first ever visit to LA.  That was the start of finally syncing up with my childhood goals.  I wanted to live near a major city.  I wanted to visit all the major cities in the world.  I wanted to see everything and meet everyone.  This job change will probably turn into something great I just don't know it yet.  I'm walking again outside my comfort zone and stepping into uncharted territory.  In 2-3 years I'll probably write another blog post how this week lead to something great.  It just stinks when you have to leave behind something you know and love.  I will miss all my current colleagues, but I'm sure I'll gain some new ones and keep in touch with the old.  To 2010 being a great year for change and hopefully by the end of the year I can say I went to Europe.  To reaching my goals and my dreams.  Don't let anyone stop you from getting what you want in life (unless you are axe murderer please don't kill anyone that's just wrong).  Have a good weekend everyone!

    Read the article

  • April 2010 Chicago Architects Group Meeting

    - by Tim Murphy
    The Chicago Architects Group will be holding its next meeting on April 20th.  Please come and join us and get involved in our architect community. Register Presenter: Matt Hidinger Topic: Onion Architecture      Location: Illinois Technology Association 200 S. Wacker Dr., Suite 1500 Room A/B Chicago, IL 60606 Time: 5:30 - Doors open at 5:00 del.icio.us Tags: Chicago Architects Group,Data Integration Architecture,Mike Vogt

    Read the article

  • Welcome to My Blog

    - by hariharan
    After long time, once again started blogging. This time i planned to go with www.geekswithblogs.net.  Reason behind this decision is quality of the articles written in this site. Whenever i google for some solution, i will definitely get a link from this site. Please wish me to have nice time with blogging. All your comments on my future topics are more appreciable. -Hari

    Read the article

  • When does a Project Manager start in a project?

    - by johndoucette
    From a colleague of mine… “As a project manager, when do you typically like to get initially involved in the project? Is it better for the PM to be rolled on during the project kick-off, the first week, or is it better to roll-on the second week when things settle down?” My textbook answer is “the Project Manager is responsible for the successful completion and delivery of the expected outcome of the project through the following major tasks;” 1.    Identifying requirements 2.    Establishing clear and achievable objectives 3.    Balancing the competing demands for quality, scope, time, and cost 4.    Adapting the specifications, plans, and approach to the different concerns and expectations of the various stakeholders However; My colleague is often a lead technical consultant coming into a project alone to help a client solve a complex problem. As Magenic consultants, we all possess many of the “project managing” skills I talked about above and tend to be responsible for item #1 and #2 as well as the actual architecture/design tasks early in a project. When the real development begins and there is no PM involved, the project will quickly get harder to execute unless items #3 & #4 are assigned to a Project Manager. In software development, the concept of context switching between coding and other administrative activities is the hardest skill perfect. In my experience, I have rarely been introduced to someone who has mastered this skill. This is the limbo I was in when I was asked to become a PM -- while still developing. “Put down the code” was not only a profound statement, but looking back – a necessary one. Unless you are lucky to have found that one developer who is a superman, asking your developers (internal corporate or consultant) to perform #3 and #4 tasks, will surely take more time, allow opportunity for more scope, and eventually cost more. Project Managers are crucial to the overall success of a project, and I prefer them to start by taking ownership of delivery on day one.

    Read the article

  • Phoenix Silverlight UserGroup tonight

    - by Dave Campbell
    Yes it really is the first Wednesday of the month! and Yes, we are having our normally scheduled meeting tonight. Everyone should be back from any Memorial Day festivities, dragging your collective drawers at work and looking for somethign interesting. Voila!... the Silverlight User Group meeting from 6PM to 8PM at Interface Technical Training (NW corner of Central & Thomas) -- check PhoenixSilverlight.net for a map. Come out for Pizza and networking at 6 then hang around because Les Brown of Sogeti is returning to speak on the new features in in .NET 4.0 as a project-based demo. I've got some fun give-aways, so come on out... it'll be too hot on tonight to be anywhere else :)

    Read the article

  • NNTP bridge for MS forums

    - by Luca Calligaris
    For those who wants to use their newsreader to interact with MS forums there's a new tool: the NNTP Bridge application serves as a channel that enables access for NNTP newsreaders to read and write content to Microsoft Forums. You can download the applcation and documentation from http://connect.microsoft.com/MicrosoftForums (registration required).

    Read the article

  • Guidance: How to layout you files for an Ideal Solution

    - by Martin Hinshelwood
    Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

    Read the article

  • Deciding On Features For Open Source

    - by Robz / Fervent Coder
    Open source feature selection is subjective. An interesting question was posed to me recently at a presentation - “How do you decide what features to include in the [open source] projects you manage?” Is It Objective? I’d like to say that it’s really objective and that we vote on features and look at what carries the most interest of the populace. Actually no I wouldn’t. I don’t think I would enjoy working on open source (OSS) as much if it someone else decided on what features I should include. It already works that way at work. I don’t want to come home from work and work on things that others decide for me unless they are paying me for those features. So how do I decide on features for our open source projects? I think there are at least three paths to feature selection and they are not necessarily mutually exclusive. Feature Selection IS the Set of Features For the Domain Your product, in whatever domain it is in, needs to have the basic set of features that make it answer the needs of that domain. That is different for every product, but if you take for example a build tool, at the very least it needs to be able to compile source. And these basic needed features are not always objective either. Two people could completely disagree what makes for a required feature to meet a domain need for a product. Even one person may disagree with himself/herself about what features are needed based on different timeframes. So that leads us down to subjective. Feature Selection IS An Answer To Competition Some features go in because the competition adds a feature that may draw others away from your product offering. With OSS, there are all free alternatives, so if your competition adds a killer feature and you don’t, there isn’t much other than learning (how to use the other product) to move your customers off to the competition. If you want to keep your customers, you need to be ready to answer the questions of adding the features your competition has added.  Sometimes it’s about adding a feature that your competition charges for, but you add it for free. That draws people to the free alternative – so sometimes that adds a motivation to select a feature. Sometimes it’s because you want those features in your product, either to learn how you can answer the question of how to do something and/or because you have a need for that feature and you want it in your product. That also leads us down the road to subjective. Feature Selection IS Subjective I decide on features based on what I want to see in the product I am working on. Things I am interested in or have the biggest need for usually get picked first, with things that do not interest me either coming later or not at all. Most people get interested in an area of OSS because it solves a need for them and/or they find it interesting. If one of these two things is not happening and they are not being paid, it’s likely that person will move on to something else they find interesting or just stop OSS altogether. OSS feature selection is just that – subjective. If it wasn’t, it wouldn’t be opinionated and it wouldn’t have a personality about it. Most people like certain OSS because they like where the product is going or the personalities behind the product. For me, I want my products to be easy to use and solve an important problem. If it takes you more than 5-10 minutes to learn how to use my product, I know you are probably going somewhere else. So I pick features that make the product easy to use and learn, and those are not always the simplest features to work on. I work for conventions and make the product opinionated, because I think that is what makes using a product easier, if it already works with little setup. And I like to provide the ability for power users to get in and change the conventions to suit their needs. So those are required features for me above and beyond the domain features. I like to think I do a pretty good job at this. Usually when I present on something I’ve created, I like seeing people’s eyes light up when they see how simple it is to set up a powerful product like UppercuT. Patches And/Or Donations But remember before you say I’m a bad person or won’t use my product, I’ll always accept patches or I might like the feature that you suggest. If you like using the products I provide and they solve a problem for you the two biggest compliments you can provide are either a patch or a donation.  If you think the product is great, but if it could do this one other thing, it would be awesome(!), then consider contacting me and providing a patch, or consider contacting me with a donation and a request to put the feature in. And alternatively, if it’s a big feature, you could hire me to work on the product to make it even better. What If There Are Multiple Committers? In the question of multiple committers, I choose that someone always makes the ultimate decision to select whether a feature should be part of a product or not. But for other OSS project maybe this is not the case. If there is not an ultimate decision maker, then there is the possibility of either adding every feature suggested or having a deadlock on two conflicting features.   So let me pose this question. If you work on Open Source, how do you decide on what features to put in your open source projects? How do you decide what doesn’t belong? What do you do when there are conflicting features?

    Read the article

  • A view from the call center for the Nashville Flood telethon

    - by Rob Foster
    I want to break away from my usual topic of something technical and talk about what I experienced tonight while working in the call center for the Nashville Flood telethon, which was broadcast on WSMV, CNN, and The Weather Channel.  We started receiving calls about 7pm local time and to be honest, I had no idea what to expect when going into this.  I mean, I'm a pretty good talker, but this is different...We had a good script of what to say and how we were supposed to say it, as well as paper forms and pens that we used to collect information from people who wanted to donate their money to help.  I took my first few calls pretty easily and it went pretty quick and easy.  Everyone was upbeat and happy to be in the call center as well as people happy to be donating money. Pizza, snacks, and soft drinks were flowing well.  Everyone is smiling and happy.  :) About 3 or 4 calls into my night, I got a call from a lady that had lost 2 family members in West Nashville who drowned in the floods.  She was crying when she called and I of course tried to console her.  She told me how bad her situation was, losing family members and much of her neighborhood.  After all this, she still just wanted to help other people.  She was donating all the money that she could to the telethon and I want to share a direct quote from her: "I want to donate this instead of buying flowers for my family members' funeral because people out there need help.". Please let me pause while I get myself together <again>.  That caught me so off guard (and still does). I had kids calling wanting to donate their allowance, open their piggy banks, whatever they could do.  These are kids.  Kids not much older than my boys.  Kids who should be focused on buying the next cool video game or toy or whatever but wanted to do something.  Everyone just seemed to want to help. I took calls from as far away as British Columbia as well and pretty much coast to coast.  how cool is that? Yet another thing that caught me off guard.  This kind lady that called from British Columbia told me how much she loved visiting Nashville and just hated to see this happen.  I belive that she said that she will be attending the CMA Fest this year too.  I was sure to tell her not to cancel her plans!  :) It felt like every call I took (and I took A LOT, as did everyone else) was very personal and heartfelt.  I've never had the privelage to do anything like this and fell lucky to have been able to help out with answering phones and logging donations.  Nashville will bounce back very quickly, people are out there day and night helping each other, and the spirits are very high here.  I hope that one day, my kids read this blog and better understand who they are, where they come from, and what the human spirt is and can be.  I love this city, I love the people here, I love the culture and even more than ever am proud to say that this is me.  This is us.  We are Nashville!

    Read the article

  • Validar Textbox para aceptar solo n&uacute;meros

    - by Jason Ulloa
    Una de las necesidades más habituales en el desarrollo es poder validar los controles Textbox para que solo acepten valore numéricos. En este post eso es lo que haremos, nos apoyaremos en el lenguaje javascript para validar nuestro textbox del lado del cliente. Nuestro primer paso será crear la función JavaScript que hará el trabajo, para ello agregamos las etiquetas de javascript <script type="text/javascript"> </script> Posteriormente dentro de esas etiquetas agregaremos el script que hará el trabajo function ValidNum(e) { var tecla= document.all ? tecla = e.keyCode : tecla = e.which; return ((tecla > 47 && tecla < 58) || tecla == 46); } Por último iremos al code behind de la página y en el evento Load agregaremos un nuevo evento al textbox para que reconozca el script. protected void Page_Load(object sender, EventArgs e) { TextBox1.Attributes.Add("onkeypress", "javascript:return ValidNum(event);"); } Con esto, tenemos el textbox validado para aceptar solo números y el punto.

    Read the article

  • Windows Phone 7 Development &ndash; Useful Links

    - by David Turner
    Here are some excellent links for anyone developing for Windows Phone 7: J.D. Meier’s Windows Phone Developer Guidance Map – this is immense.  Also check out the Silverlight version Justin Angel’s site – some really great articles on unlocked roms, automation and Continuous Integration Windows Phone 7 Development Best Practices Wiki Jeff Blankenburg’s 31 days of Windows Phone 7 This post of Links to sample code for Windows Phone Tim Heuers blog, particularly this post of Tips and Tricks Kevin Marshall's blog, particularly the epic WP7 Development Tips Part 1 post Code Samples for Windows Phone on MSDN If you have unlocked your phone for development, then you can use the WPConnect tool to connect to the device rather than using the Zune client.  I found it useful to pin a shortcut to WPConnect in my Start Menu. The Performance Counters displayed when you debug your app on a device are useful for seeing things like frame rate and memory usage, this page on MSDN explains what the numbers mean.  Jeff Blankenburg covers this in more details on his blog I also came across this set of links to tutorials recently which looks very useful. Creating Windows Phone 7 Application and Marketplace Icons: http://expression.microsoft.com/en-us/gg317447.aspx

    Read the article

  • Timeout Considerations for Solicit Response

    - by Michael Stephenson
    Background One of the clients I work with had been experiencing some issues for a while surrounding web service timeouts.  It's been a little challenging to work through the problems due to limitations in the diagnostic information available from one of the applications, but I learned some interesting things while troubleshooting the problem which don't seem to have been discussed much in the community so I thought I'd share my findings. In the scenario we have BizTalk trying to make calls to a .net web service which was exposed as a WSE 2 endpoint.  In the process BizTalk will try to make a large number of concurrent web service calls to the application, and the backend application has more than enough infrastructure and capability to handle the load. We have configured the <ConnectionManagement> section of the BizTalk configuration file to support up to 100 concurrent connections from each of our 2 BizTalk send servers to the web servers of the application. The problem we were facing was that the BizTalk side was reporting a significant number of timeouts when calling the web service.   One of the biggest issues was the challenge of being able to correlate a message from BizTalk to the IIS log in the .net application and the custom logs in the application especially when there was a fairly large number of servers hosting the web services.  However the key moment came when we were able to identify a specific call which had taken 40 seconds to execute on the server (yes a long time I know but that's a different story!).  Anyway we were able to identify that this had timed out on the BizTalk side.  Based on the normal 2 minute timeout we knew something unexpected was going on. From here I decided to do some experimentation and I wanted to start outside of BizTalk because my hunch was this was not a BizTalk behaviour but something which was being highlighted by BizTalk because of our large load.     Server-side - Sample Web Service To begin with I created a sample web service.  Nothing special just a vanilla asmx web service hosted in IIS6 on Windows 2003 Standard Edition.  The web service is just a hello world style web service as shown in the below picture.  The only key feature is that the server side web method has a 30 second sleep in it and will trace out some information before and after the thread is set to sleep.      In the configuration for this web service there again is nothing special it's pretty much the most plain simple web service you could build. Client-Side To begin looking at what was happening with our example I created a number of different ways to consume the web service. SoapHttpClientProtocol Example I created a small application which would use a normal proxy generated to call the web service.  It would iterate around a loop and make calls using the begin/end methods so I can do this asynchronously.  I would do a loop of 20 calls with the ConnectionManager configuration section supporting only 5 concurrent connections to the server.     <connectionManagement> <remove address="*"/> <add address = "*" maxconnection = "12" /> <add address = "http://<ServerName>" maxconnection = "5" />                         </connectionManagement> </system.net>     The below picture shows an example of the service calling code, key points are: I have configured the timeout of 40 seconds for the proxy I am using the asynchronous methods on the proxy to call the web service         The Test I would run the client and execute 21 calls to the web service.   The Results  Below is the client side trace showing what's happening on the client. In the below diagram is the web service side trace showing what's happening on the server Some observations on the results are: All of the calls were successful from the clients perspective You could see the next call starting on the server as soon as the previous one had completed Calls took significantly longer than 40 seconds from the start of our call to the return. In fact call 20 took 2 minutes and 30 seconds from the perspective of my code to execute even though I had set the timeout to 40 seconds     WSE 2 Sample In the second example I used the exact same code to call the web service again with a single exception that I modified the web service proxy to derive from WebServiceClient protocol which is part of WSE 2 (using SP3).  The below picture shows the basic code and the key points are: I have configured the timeout of 40 seconds for the proxy I am using the asynchronous methods on the proxy to call the web service        The Test This test would execute 21 calls from the client to the web service.   The Results  The below trace is from the client side: The below trace is from the server side:   Some observations on the trace results for this scenario are: With call 4 if you look at the server side trace it did not start executing on the server for a number of seconds after the other 4 initial calls which were accepted by the server. I re-ran the test and this happened a couple of times and not on most others so at this point I'm just putting this down to something unexpected happening on the development machine and we will leave this observation out of scope of this article. You can see that the client side trace statement executed almost immediately in all cases All calls after the initial few calls would timeout On the client side the calls that did timeout; timed out in a longer duration than the 40 seconds we set as the timeout You can see that as calls were completing on the server the next calls were starting to come through The calls that timed out on the client did actually connect to the server and their server side execution completed successfully     Elaboration on the findings Based on the above observations I have drawn the below sequence diagram to illustrate conceptually what is happening.  Everything except the final web service object is on the client side of the call. In the diagram below I've put two notes on the Web Service Proxy to show the two different places where the different base classes seem to start their timeout counters. From the earlier samples we can work out that the timeout counter for the WSE web service proxy starts before the one for the SoapHttpClientProtocol proxy and the WSE one includes the time to get a connection from the pool; whereas the Soap proxy timeout just covers the method execution. One interesting observation is if we rerun the above sample and increase the number of calls from 21 to 100,000 then for the WSE sample we will see a similar pattern where everything after the first few calls will timeout on the client as soon as it makes a connection to the server whereas the soap proxy will happily plug away and process all of the calls without a single timeout. I have actually set the sample running overnight and this did happen. At this point you are probably thinking the same thoughts I was at the time about the differences in behaviour and which is right and why are they different? I'm not sure there is a definitive answer to this in the documentation, or at least not that I could find! I think you just have to consider that they are different and they could have different effects depending on your messaging solution. In lots of situations this is just not an issue as your concurrent requests doesn't get to the situation where you end up throttling the web service calls on the client side, however this is definitely more common with an integration broker such as BizTalk where you often have high throughput requirements.  Some of the considerations you should make Based on this behaviour you should be aware of the following: In a .net application if you are making lots of concurrent web service calls from an application in an asynchronous manner your user may thing they are experiencing poor performance but you think your web service is working well. The problem could be that the client will have a default of 2 connections to remote servers so you should bear this in mind When you are developing a BizTalk solution or a .net solution with the WSE 2 stack you may experience timeouts under load and throttling the number of connections using the max connections element in the configuration file will not help you For an application using WSE2 or SoapHttpClientProtocol an expired timeout will not throw an error until after a connection to the server has been made so you should consider this in your transaction and durability patterns     Our Work Around In the short term for our specific scenario we know that we can handle this by just increasing our timeout value.  There is only a specific small window when we get lots of concurrent traffic that causes this scenario so we should be able to increase the timeout to take into consideration the additional client side wait, and on the odd occasion where we do get a timeout the BizTalk send port retry will handle this. What was causing our original problem was that for that short window we were getting a lot of retries which significantly increased the load on our send servers and highlighted the issue.  Longer Term Solution As a longer term solution this really gives us more ammunition to argue a migration to WCF. The application we are calling has some factors which limit the protocols we can use but with WCF we would have more control on the various timeout options because in WCF you can configure specific parts of the timeout. Summary I've had this blog post on my to do list for ages but hopefully it will be useful to some people to just understand this behaviour and to possibly help you with some performance issues you may have. I do not believe there is too much in the way of documentation particularly around WSE2 and ASMX in this area so again another bit of ammunition for migrating to WCF. I'll try to do a follow up post with the sample for WCF to show how this changes things.

    Read the article

  • EF4 CPT5 Code First Remove Cascading Deletes

    - by Dane Morgridge
    I have been using EF4 CTP5 with code first and I really like the new code.  One issue I was having however, was cascading deletes is on by default.  This may come as a surprise as using Entity Framework with anything but code first, this is not the case.  I ran into an exception with some one-to-many relationships I had: Introducing FOREIGN KEY constraint 'ProjectAuthorization_UserProfile' on table 'ProjectAuthorizations' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints. Could not create constraint. See previous errors. To get around this, you can use the fluent API and put some code in the OnModelCreating: 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Entity<UserProfile>() 4: .HasMany(u => u.ProjectAuthorizations) 5: .WithRequired(a => a.UserProfile) 6: .WillCascadeOnDelete(false); 7: } This will work to remove the cascading delete, but I have to use the fluent API and it has to be done for every one-to-many relationship that causes the problem. I am personally not a fan of cascading deletes in general (for several reasons) and I’m not a huge fan of fluent APIs.  However, there is a way to do this without using the fluent API.  You can in the OnModelCreating, remove the convention that creates the cascading deletes altogether. 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>(); 4: } Thanks to Jeff Derstadt from Microsoft for the info on removing the convention all together.  There is a way to build a custom attribute to remove it on a case by case basis and I’ll have a post on how to do this in the near future.

    Read the article

  • Adventures in Scrum: Lesson 1 &ndash; The failed Sprint

    - by Martin Hinshelwood
    I recently had a conversation with a product owner that wanted to have the Scrum team broken up into smaller units so that less time was wasted on the Scrum Ceremonies! Their complaint was around the need in Scrum to have the entire “Team” (7+-2) involved in the sizing of the work during the “Sprint Planning Meeting”.  The standard flippant answer of all Scrum professionals, “Well that's not Scrum”, does not get you any brownie points in these situations. The response could be “Well we are not doing Scrum then” which in turn leads to “We are doing Scrum…But, we have split the scrum team into units of 2/3 so that they can concentrate on a specific area of work”. While this may work, it is not Scrum and should not be called so… It is just a form of Agile. Don’t get me wrong at this stage, there is nothing wrong with Agile, just don’t call it Scrum. The reason that the Product Owner wants to do this is that, in effect, through a number of miscommunications and failings in our implementation of Scrum, there was NO unit of potentially Shippable software at the end of the first sprint. It does not matter to them that most Scrum teams will fail the first Sprint, even those that are high performing teams. Remember it is the product owners their money! We should NOT break up scrum teams into smaller units for the purpose of having less people tied up in the Scrum Ceremonies. The amount of backlog the Team selects is solely up to the Team… Only the Team can assess what it can accomplish over the upcoming Sprint. - Scrum Guide, Scrum.org The entire team must accept the work and in order to understand what they can accept they must be free to size it as a team. This both encourages common understanding and increases visibility on why team members think a task is of a particular size. This has the benefit of increasing the knowledge of the entire team in the problem domain. A new Team often first realizes that it will either sink or swim as a Team, not individually, in this meeting. The Team realizes that it must rely on itself. As it realizes this, it starts to self-organize to take on the characteristics and behaviour of a real Team. - Scrum Guide, Scrum.org This paragraph goes to the why of having the whole team at the meeting; The goal of Scrum it to produce a unit of potentially shippable software at the end of every Sprint. In order to achieve this we need high performing teams and this is what Scrum as a framework has been optimised to produce. I think that our Product Owner is understandably upset over loosing two weeks work and is losing sight the end goal of Scrum in the failures of the moment. As the man spending the money, I completely understand his perspective and I think that we should not have started Scrum on an internal project, but selected a customer  that is open to the ideas and complications of Scrum. So, what should we have NOT done on our first Scrum project: Should not have had 3 interns as the only on site resource – This lead to bad practices as the experienced guys were not there helping and correcting as they usually would. Should not have had the only experienced guys offsite – With both the experienced technical guys in completely different time zones it was difficult to get time for questions. Helping the guys on site was just plain impossible. Should not have used a part time ScrumMaster – Although the ScrumMaster attended all of the Ceremonies, because they are only in 2 full days of the week it makes it difficult for the team to raise impediments as they go. Should not have used a proxy product owner. – This was probably the worst decision that was made. Mainly because the proxy product owner did not have the same vision as the product owner. While Scrum does not explicitly reject the idea of a Proxy Product Owner, I do not think it works very well in practice. The “single wringable neck” needs to contain both the Money and the Vision as well as attending the required meetings. I will be brining all of these things up at the Sprint Retrospective and we will learn from our mistakes and move on. Do, Inspect then Adapt…   Technorati Tags: Scrum,Sprint Planing,Sprint Retrospective,Scrum.org,Scrum Guide,Scrum Ceremonies,Scrummaster,Product Owner Need Help? Professional Scrum Developer Training SSW has six Professional Scrum Developer Trainers who specialise in training your developers in implementing Scrum with Microsoft's Visual Studio ALM tools.

    Read the article

  • Distribute Sort Sample Service

    - by kaleidoscope
    How it works? Using the front-end of the service, a user can specify a size in MB for the input data set to sort. Algorithm CreateAndSplit The CreateAndSplit task generates the input data and stores them as 10 blobs in the utility storage. The URLs to these blobs are packaged as Separate work items and written to the queue. · Separate The Separate task reads the blobs with the random numbers created in the CreateAndSplit task and places the random numbers into buckets. The interval of the numbers that go into one bucket is chosen so that the expected amount of numbers (assuming a uniform distribution of the numbers in the original data set) is around 100 kB. Each bucket is represented as a blob container in utility storage. Whenever there are 10 blobs in one bucket (i.e., the placement in this bucket is complete because we had 10 original splits), the separate task will generate a new Sort task and write the task into the queue. · Sort The Sort task merges all blobs in a single bucket and sorts them using a standard sort algorithm. The result is stored as a blob in utility storage. · Concat The concat task merges the results of all Sort tasks into a single blob. This blob can be downloaded as a text file using this Web page. As the resulting file is presented in text format, the size of the file is likely to be larger than the specified input file. Anish

    Read the article

  • Silverlight Cream for February 06, 2011 -- #1042

    - by Dave Campbell
    In this Issue: Mike Taulty, Timmy Kokke, Laurent Bugnion, Arik Poznanski, Deyan Ginev, Deborah Kurata(-2-), Johnny Tordgeman, Roy Dallal, Jaime Rodriguez, Samuel Jack(-2-), James Ashley. Above the Fold: Silverlight: "Customizing Silverlight properties for Visual Designers" Timmy Kokke WP7: "Back button press when using webbrowser control in WP7" Jaime Rodriguez Expression Blend: "Blend Bits 21–Importing from Photoshop & Illustrator…" Mike Taulty From SilverlightCream.com: Blend Bits 21–Importing from Photoshop & Illustrator… Mike Taulty is up to 21 episodes on his Blend Bits sequence now, and this one is about using Blend's import capability, such as a .psd file with all the layers intact. Customizing Silverlight properties for Visual Designers Timmy Kokke has part 1 of 2 parts on making your Silverlight control properties in design surfaces such as Visual Studio designer or Expression Blend. An error when installing MVVM Light templates for VS10 Express Laurent Bugnion has released a new version of MVVMLight that resolves a problem with VS2010 Express version of the templates... no problem with anything else. Reading RSS items on Windows Phone 7 Arik Poznanski has a post up about reading RSS on a WP7, but better yet, he also has code for a helper class that you can grab, plus explanation of wiring it up. Integrating your Windows Phone unit tests with MSBuild #4: The WP7 Unit Test Application Deyan Ginev has a post up about Telerik's WP7 test app that outputs test results in XML from the emulator so they can be integrated with the MSBuild log. Accessing Data in a Silverlight Application: EF I apprently missed this post by Deborah Kurata last week on bringing data into your Silverlight app via Entity Frameworks... good detailed tutorial in VB and C#. Updating Data in a Silverlight Application: EF In Deborah Kurata's latest post, she is continuing with Entity Frameworks by demonstrating updating to the database... full source code will be produced in a later post. Fun with Silverlight and SharePoint 2010 Ribbon Control - Part 2 - An In Depth Look At The Ribbon Control Johnny Tordgeman has Part 2 of his Silverlight and Sharepoint 2010 Ribbon up... taking a deep-dive into the ribbon... great explanation of the attributes, code included. Geographic Coordinates Systems Roy Dallal has some Geo code up that's not necessarily Silverlight, but very cool if you're doing any GIS programming... ya gotta know the coordinate systems! Back button press when using webbrowser control in WP7 Jaime Rodriguez has a post up discussing the much-lamented back-button action in the certification requirements and how to deal with that in a web browser app. Multiplayer-enabling my Windows Phone 7 game: Day 1 Samuel Jack challenged himself to build a WP7 game in 3 days... now he's challenging himself to make it multiplayer in 3 days... this first hour-to-hour post is research of networking and an azure server-side solution. Multiplayer-enabling my Windows Phone 7 game: Day 2–Building a UI with XPF Day 2 for Samuel Jack getting the multiplayer portion of his game working in 3 days.. this day involves getting up-to-speed with XPF. How to Hotwire your WP7 Phone Battery Did you realize if you run your WP7 battery completely down that you can't charge it? James Ashley reports that circumstance, and how he resolved it. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Adding SQL Cache Dependencies to the Loosely coupled .NET Cache Provider

    - by Rhames
    This post adds SQL Cache Dependency support to the loosely coupled .NET Cache Provider that I described in the previous post (http://geekswithblogs.net/Rhames/archive/2012/09/11/loosely-coupled-.net-cache-provider-using-dependency-injection.aspx). The sample code is available on github at https://github.com/RobinHames/CacheProvider.git. Each time we want to apply a cache dependency to a call to fetch or cache a data item we need to supply an instance of the relevant dependency implementation. This suggests an Abstract Factory will be useful to create cache dependencies as needed. We can then use Dependency Injection to inject the factory into the relevant consumer. Castle Windsor provides a typed factory facility that will be utilised to implement the cache dependency abstract factory (see http://docs.castleproject.org/Windsor.Typed-Factory-Facility-interface-based-factories.ashx). Cache Dependency Interfaces First I created a set of cache dependency interfaces in the domain layer, which can be used to pass a cache dependency into the cache provider. ICacheDependency The ICacheDependency interface is simply an empty interface that is used as a parent for the specific cache dependency interfaces. This will allow us to place a generic constraint on the Cache Dependency Factory, and will give us a type that can be passed into the relevant Cache Provider methods. namespace CacheDiSample.Domain.CacheInterfaces { public interface ICacheDependency { } }   ISqlCacheDependency.cs The ISqlCacheDependency interface provides specific SQL caching details, such as a Sql Command or a database connection and table. It is the concrete implementation of this interface that will be created by the factory in passed into the Cache Provider. using System; using System.Collections.Generic; using System.Linq; using System.Text;   namespace CacheDiSample.Domain.CacheInterfaces { public interface ISqlCacheDependency : ICacheDependency { ISqlCacheDependency Initialise(string databaseConnectionName, string tableName); ISqlCacheDependency Initialise(System.Data.SqlClient.SqlCommand sqlCommand); } } If we want other types of cache dependencies, such as by key or file, interfaces may be created to support these (the sample code includes an IKeyCacheDependency interface). Modifying ICacheProvider to accept Cache Dependencies Next I modified the exisitng ICacheProvider<T> interface so that cache dependencies may be passed into a Fetch method call. I did this by adding two overloads to the existing Fetch methods, which take an IEnumerable<ICacheDependency> parameter (the IEnumerable allows more than one cache dependency to be included). I also added a method to create cache dependencies. This means that the implementation of the Cache Provider will require a dependency on the Cache Dependency Factory. It is pretty much down to personal choice as to whether this approach is taken, or whether the Cache Dependency Factory is injected directly into the repository or other consumer of Cache Provider. I think, because the cache dependency cannot be used without the Cache Provider, placing the dependency on the factory into the Cache Provider implementation is cleaner. ICacheProvider.cs using System; using System.Collections.Generic;   namespace CacheDiSample.Domain.CacheInterfaces { public interface ICacheProvider<T> { T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies);   IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies);   U CreateCacheDependency<U>() where U : ICacheDependency; } }   Cache Dependency Factory Next I created the interface for the Cache Dependency Factory in the domain layer. ICacheDependencyFactory.cs namespace CacheDiSample.Domain.CacheInterfaces { public interface ICacheDependencyFactory { T Create<T>() where T : ICacheDependency;   void Release<T>(T cacheDependency) where T : ICacheDependency; } }   I used the ICacheDependency parent interface as a generic constraint on the create and release methods in the factory interface. Now the interfaces are in place, I moved on to the concrete implementations. ISqlCacheDependency Concrete Implementation The concrete implementation of ISqlCacheDependency will need to provide an instance of System.Web.Caching.SqlCacheDependency to the Cache Provider implementation. Unfortunately this class is sealed, so I cannot simply inherit from this. Instead, I created an interface called IAspNetCacheDependency that will provide a Create method to create an instance of the relevant System.Web.Caching Cache Dependency type. This interface is specific to the ASP.NET implementation of the Cache Provider, so it should be defined in the same layer as the concrete implementation of the Cache Provider (the MVC UI layer in the sample code). IAspNetCacheDependency.cs using System.Web.Caching;   namespace CacheDiSample.CacheProviders { public interface IAspNetCacheDependency { CacheDependency CreateAspNetCacheDependency(); } }   Next, I created the concrete implementation of the ISqlCacheDependency interface. This class also implements the IAspNetCacheDependency interface. This concrete implementation also is defined in the same layer as the Cache Provider implementation. AspNetSqlCacheDependency.cs using System.Web.Caching; using CacheDiSample.Domain.CacheInterfaces;   namespace CacheDiSample.CacheProviders { public class AspNetSqlCacheDependency : ISqlCacheDependency, IAspNetCacheDependency { private string databaseConnectionName;   private string tableName;   private System.Data.SqlClient.SqlCommand sqlCommand;   #region ISqlCacheDependency Members   public ISqlCacheDependency Initialise(string databaseConnectionName, string tableName) { this.databaseConnectionName = databaseConnectionName; this.tableName = tableName; return this; }   public ISqlCacheDependency Initialise(System.Data.SqlClient.SqlCommand sqlCommand) { this.sqlCommand = sqlCommand; return this; }   #endregion   #region IAspNetCacheDependency Members   public System.Web.Caching.CacheDependency CreateAspNetCacheDependency() { if (sqlCommand != null) return new SqlCacheDependency(sqlCommand); else return new SqlCacheDependency(databaseConnectionName, tableName); }   #endregion   } }   ICacheProvider Concrete Implementation The ICacheProvider interface is implemented by the CacheProvider class. This implementation is modified to include the changes to the ICacheProvider interface. First I needed to inject the Cache Dependency Factory into the Cache Provider: private ICacheDependencyFactory cacheDependencyFactory;   public CacheProvider(ICacheDependencyFactory cacheDependencyFactory) { if (cacheDependencyFactory == null) throw new ArgumentNullException("cacheDependencyFactory");   this.cacheDependencyFactory = cacheDependencyFactory; }   Next I implemented the CreateCacheDependency method, which simply passes on the create request to the factory: public U CreateCacheDependency<U>() where U : ICacheDependency { return this.cacheDependencyFactory.Create<U>(); }   The signature of the FetchAndCache helper method was modified to take an additional IEnumerable<ICacheDependency> parameter:   private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) and the following code added to create the relevant System.Web.Caching.CacheDependency object for any dependencies and pass them to the HttpContext Cache: CacheDependency aspNetCacheDependencies = null;   if (cacheDependencies != null) { if (cacheDependencies.Count() == 1) // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aspNetCacheDependencies = ((IAspNetCacheDependency)cacheDependencies.ElementAt(0)).CreateAspNetCacheDependency(); else if (cacheDependencies.Count() > 1) { AggregateCacheDependency aggregateCacheDependency = new AggregateCacheDependency(); foreach (ICacheDependency cacheDependency in cacheDependencies) { // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aggregateCacheDependency.Add(((IAspNetCacheDependency)cacheDependency).CreateAspNetCacheDependency()); } aspNetCacheDependencies = aggregateCacheDependency; } }   HttpContext.Current.Cache.Insert(key, value, aspNetCacheDependencies, absoluteExpiry.Value, relativeExpiry.Value);   The full code listing for the modified CacheProvider class is shown below: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Caching; using CacheDiSample.Domain.CacheInterfaces;   namespace CacheDiSample.CacheProviders { public class CacheProvider<T> : ICacheProvider<T> { private ICacheDependencyFactory cacheDependencyFactory;   public CacheProvider(ICacheDependencyFactory cacheDependencyFactory) { if (cacheDependencyFactory == null) throw new ArgumentNullException("cacheDependencyFactory");   this.cacheDependencyFactory = cacheDependencyFactory; }   public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) { return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry, null); }   public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) { return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry, cacheDependencies); }   public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) { return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry, null); }   public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) { return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry, cacheDependencies); }   public U CreateCacheDependency<U>() where U : ICacheDependency { return this.cacheDependencyFactory.Create<U>(); }   #region Helper Methods   private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) { U value; if (!TryGetValue<U>(key, out value)) { value = retrieveData(); if (!absoluteExpiry.HasValue) absoluteExpiry = Cache.NoAbsoluteExpiration;   if (!relativeExpiry.HasValue) relativeExpiry = Cache.NoSlidingExpiration;   CacheDependency aspNetCacheDependencies = null;   if (cacheDependencies != null) { if (cacheDependencies.Count() == 1) // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aspNetCacheDependencies = ((IAspNetCacheDependency)cacheDependencies.ElementAt(0)).CreateAspNetCacheDependency(); else if (cacheDependencies.Count() > 1) { AggregateCacheDependency aggregateCacheDependency = new AggregateCacheDependency(); foreach (ICacheDependency cacheDependency in cacheDependencies) { // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aggregateCacheDependency.Add( ((IAspNetCacheDependency)cacheDependency).CreateAspNetCacheDependency()); } aspNetCacheDependencies = aggregateCacheDependency; } }   HttpContext.Current.Cache.Insert(key, value, aspNetCacheDependencies, absoluteExpiry.Value, relativeExpiry.Value);   } return value; }   private bool TryGetValue<U>(string key, out U value) { object cachedValue = HttpContext.Current.Cache.Get(key); if (cachedValue == null) { value = default(U); return false; } else { try { value = (U)cachedValue; return true; } catch { value = default(U); return false; } } }   #endregion } }   Wiring up the DI Container Now the implementations for the Cache Dependency are in place, I wired them up in the existing Windsor CacheInstaller. First I needed to register the implementation of the ISqlCacheDependency interface: container.Register( Component.For<ISqlCacheDependency>() .ImplementedBy<AspNetSqlCacheDependency>() .LifestyleTransient());   Next I registered the Cache Dependency Factory. Notice that I have not implemented the ICacheDependencyFactory interface. Castle Windsor will do this for me by using the Type Factory Facility. I do need to bring the Castle.Facilities.TypedFacility namespace into scope: using Castle.Facilities.TypedFactory;   Then I registered the factory: container.AddFacility<TypedFactoryFacility>();   container.Register( Component.For<ICacheDependencyFactory>() .AsFactory()); The full code for the CacheInstaller class is: using Castle.MicroKernel.Registration; using Castle.MicroKernel.SubSystems.Configuration; using Castle.Windsor; using Castle.Facilities.TypedFactory;   using CacheDiSample.Domain.CacheInterfaces; using CacheDiSample.CacheProviders;   namespace CacheDiSample.WindsorInstallers { public class CacheInstaller : IWindsorInstaller { public void Install(IWindsorContainer container, IConfigurationStore store) { container.Register( Component.For(typeof(ICacheProvider<>)) .ImplementedBy(typeof(CacheProvider<>)) .LifestyleTransient());   container.Register( Component.For<ISqlCacheDependency>() .ImplementedBy<AspNetSqlCacheDependency>() .LifestyleTransient());   container.AddFacility<TypedFactoryFacility>();   container.Register( Component.For<ICacheDependencyFactory>() .AsFactory()); } } }   Configuring the ASP.NET SQL Cache Dependency There are a couple of configuration steps required to enable SQL Cache Dependency for the application and database. From the Visual Studio Command Prompt, the following commands should be used to enable the Cache Polling of the relevant database tables: aspnet_regsql -S <servername> -E -d <databasename> –ed aspnet_regsql -S <servername> -E -d CacheSample –et –t <tablename>   (The –t option should be repeated for each table that is to be made available for cache dependencies). Finally the SQL Cache Polling needs to be enabled by adding the following configuration to the <system.web> section of web.config: <caching> <sqlCacheDependency pollTime="10000" enabled="true"> <databases> <add name="BloggingContext" connectionStringName="BloggingContext"/> </databases> </sqlCacheDependency> </caching>   (obviously the name and connection string name should be altered as required). Using a SQL Cache Dependency Now all the coding is complete. To specify a SQL Cache Dependency, I can modify my BlogRepositoryWithCaching decorator class (see the earlier post) as follows: public IList<Blog> GetAll() { var sqlCacheDependency = cacheProvider.CreateCacheDependency<ISqlCacheDependency>() .Initialise("BloggingContext", "Blogs");   ICacheDependency[] cacheDependencies = new ICacheDependency[] { sqlCacheDependency };   string key = string.Format("CacheDiSample.DataAccess.GetAll");   return cacheProvider.Fetch(key, () => { return parentBlogRepository.GetAll(); }, null, null, cacheDependencies) .ToList(); }   This will add a dependency of the “Blogs” table in the database. The data will remain in the cache until the contents of this table change, then the cache item will be invalidated, and the next call to the GetAll() repository method will be routed to the parent repository to refresh the data from the database.

    Read the article

  • Sync Google Contacts with QuickBooks

    - by dataintegration
    The RSSBus ADO.NET Providers offer an easy way to integrate with different data sources. In this article, we include a fully functional application that can be used to synchronize contacts between Google and QuickBooks. Like our QuickBooks ADO.NET Provider, the included application supports both the desktop versions of QuickBooks and QuickBooks Online Edition. Getting the Contacts Step 1: Google accounts include a number of contacts. To obtain a list of a user's Google Contacts, issue a query to the Contacts table. For example: SELECT * FROM Contacts. Step 2: QuickBooks stores contact information in multiple tables. Depending on your use case, you may want to synchronize your Google Contacts with QuickBooks Customers, Employees, Vendors, or a combination of the three. To get data from a specific table, issue a SELECT query to that table. For example: SELECT * FROM Customers Step 3: Retrieving all results from QuickBooks may take some time, depending on the size of your company file. To narrow your results, you may want to use a filter by including a WHERE clause in your query. For example: SELECT * FROM Customers WHERE (Name LIKE '%James%') AND IncludeJobs = 'FALSE' Synchronizing the Contacts Synchronizing the contacts is a simple process. Once the contacts from Google and the customers from QuickBooks are available, they can be compared and synchronized based on user preference. The sample application does this based on user input, but it is easy to create one that does the synchronization automatically. The INSERT, UPDATE, and DELETE statements available in both data providers makes it easy to create, update, or delete contacts in either data source as needed. Pre-Built Demo Application The executable for the demo application can be downloaded here. Note that this demo is built using BETA builds of the ADO.NET Provider for Google V2 and ADO.NET Provider for QuickBooks V3, and will expire in 2013. Source Code You can download the full source of the demo application here. You will need the Google ADO.NET Data Provider V2 and the QuickBooks ADO.NET Data Provider V3, which can be obtained here.

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >