Search Results

Search found 3513 results on 141 pages for 'raw sockets'.

Page 84/141 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Oracle 10g cannot see any data in tables

  - by MMRUSer

  Im getting this error in Oracle 10g log file 2010-11-12 16:07:41.838: [ OCROSD][3069777600]utgdv:2:ocr loc file cannot be opened 2010-11-12 16:07:41.865: [ OCROSD][3069777600]utopen:1: Couldnt find ocr,[ocrmirror] location in config file 2010-11-12 16:07:41.865: [ OCRRAW][3069777600]proprinit: Could not open raw device 2010-11-12 16:07:41.865: [ default][3069777600]a_init:7!: Backend init unsuccessful : [33] 2010-11-12 16:07:41.865: [ CSSCLNT][3069777600]clsssinit: error(33 ) in OCR initialization I was able to connect but can't generate table data form my client program. Plus it was working earlier. Im running on Redhat EL 5 Thanks.

  Read the article

• Dual HDD dual boot Win7/Win7 hibernate corrupts partitions?

  - by Ivan Zlatev

  I have two SSDs in my laptop. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa. What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often. Just happened actually - it is shown as "RAW" in the Disk manager instead of NTFS and windows will blue screen at boot. Alternatively I've seen cases where chkdsk will run and will wipe out all security descriptors making the partition completly unbootable. Why am I seeing these corruptions and what can I do to prevent them?

  Read the article

• Sorting IPv4 Addresses

  - by Kumba

  So I've run into a quandary on sorting IPv4 addresses, and didn't know if there was a set rule in some obscure networking document. Do I do a straight sort on the raw address only (such as converting the IP address to a 32bit number and then sorting), do I factor in the CIDR via some mathematical formula, do I sort via the CIDR only (as if I'm comparing the network size and not the addresses directly)? I.e., normal math, we'd do something like -1 < 0 < 1 to denote the order of precedence. Given say, 10.1.0.0/16, 172.16.0.0/12, 192.168.1.0/24, and 192.168.1.42, what would be the order of precedence?

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• Repair Lacie 2Big Network 2

  - by Donier

  hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

  Read the article

• Is there a clean way to tell Windows to release a volume?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive and has to abort there. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away?

  Read the article

• Error running Solr

  - by Jon H

  I'm trying to install Apache Solr for Plone, via collective.solr. I've followed the instructions above, and extended my buildout with: [buildout] extends = buildout.cfg https://github.com/Jarn/collective.solr/raw/master/buildout/solr.cfg [instance] eggs += collective.solr bin/buildout runs fine, however, when I try bin/solr-instance fg I get the following error: Traceback (most recent call last): File "bin/solr-instance", line 114, in <module> start(False) File "bin/solr-instance", line 43, in start stdout=logfp, stderr=logfp).pid File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory Graceful stop What am I missing / doing wrong?

  Read the article

• Default audio device gives an error on WINDOWS 7 (x64) when triing to run VLC from CMD (VideoLAN, VL

  - by Ole Jak

  I use WINDOWS 7 (x64) (Russian) I want to stream life audio from my default audio capture device (microphone) When I set up VLM settings using visual enviroment instruments - VLM settings it all works fine. But when I export created settings/configuration *.vlm file and try to inport it into VLM it gives me nothing I opened that .vlm there is some text... so now I try to run VLC with default settings like this: vlc -i dshow:// --dshow-adev= :sout=#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=http,mux=raw,dst=127.0.0.1:8084} but it dies giving me errors...=( So what shall I do to do live MP3 streaming from my default audio input device using VLC in non UI mode?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Converting an ancient RH8 system to VMware ESXi

  - by donatello

  I am curious to know what options I have to convert a very old RedHat8 machine to a virtual one on ESXi. Looking at VMware Converter it seems there's an option to login to the RH8 using SSH, and from there it will convert to the ESXi-server. That makes me a bit nervous though, exactly what is happening there? The RH8 machine is slightly critical, and if anything messes up it'll likely result in many hours extra work. :( Another option I thought of was to boot a LiveCD on RH8-system and create a raw "dd dump" of the disk. The similar method is used to restore the image, I boot a LiveCD on the VM in ESXi and use "dd" to write it to disk. Is there any other option I could use? I'm using the cheap version of ESXi, hence I have no access to the Converter BootCD so these rather cumbersome methods is the only I can think of. :)

  Read the article

• Doing a mysql dump causes swapping issues

  - by DFischer

  I do a mysqldump manually every night. I just noticed that after it is done and I try to access the website it is very slow. After I take a look at the free -mh I notice that the server is now swapping when it otherwise wasn't before the mysqldump. What am I to do in this case? Just restart the server every time I backup? That doesn't seem very effective. My database file raw is 1.1gb after the dump.

  Read the article

• eTrayz: Replace base system with a bootstrapped Debian

  - by knoopx

  I bought an eTrayz NAS time ago. The device is more or less good but it ships with a closed-source custom linux and a bunch of broken web-apps. I wanted to replace the whole system with a raw Debian installation. I successfully bootstrapped a Lenny Debian into a chroot and I'm able to use use it. However I would like it to be the default system and to boot automatically at login. The device itself ships with a bundled 2.6.24.4 kernel. I think the kernel is on a dedicated flash memory so I would prefere not to re-flash it. What do you think is the best way to accomplish it?

  Read the article

• Software that will burn DVDs with a SFV or Pararchive file for each disc?

  - by Matt

  I'd like to burn several thousand RAW files (.DNG) of around 10-30 MB each to DVD to backup my photo archive. I'm looking for software that can do this and include an SFV-type file on each disc burnt. These are my requirements: compression is optional, and probably not desirable due to the extra time involved files should be spread amongst the discs as self-contained units, i.e. I don't want to have to load files from more than one disc to be able to read the files on that disc, so that excludes WinRAR's spanning options I don't want to spend time writing ISO images first as this will be a task I'll need to repeat often as I add new images to my archive - the software should write to the DVDs for me as simply as possible I'd like the SFV/Pararchive/recovery record to be stored with the files on each disc, so it only references the files on that particular disk Thanks in advance!

  Read the article

• OSX Mail.app send only plaintext but read as html

  - by bawkstoo

  I get email which seems properly plaintext formatted, but when I forward it out, the font size ends up being enormous and a few other formatting stupidities. So I tried the following: defaults write com.apple.mail PreferPlainText -bool TRUE And this works great, all outgoing email regardless of the text original is plaintext only, just the way I like it. But now for incoming email only the plaintext portions are available to read without going into View - Message - Raw Source (or something similar to that). Does anyone know how I can force only outgoing mail to include only plaintext, but continue to read incoming mail in the formatting it was intended?

  Read the article

• Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

  - by Jim Dagg

  I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

  Read the article

• Snow Leopard crashes my Xerox printer

  - by Ho Li Cow

  Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

  Read the article

• virtualbox 2 vmware disk

  - by anol

  I have a virtualbox disk I'd like to convert to a vmware disk. The disk is dynamic which makes it a lot more trickier. If I follow the instructions at http://xpapad.wordpress.com/2010/02/21/migrating-from-virtualbox-to-vmware-in-linux, the vdi-to-raw conversion will result in a 2 TB file. I don't even have that much disk space! The first step therefore seems to be a dynamic to static conversion of the virtualbox disk, right? How do I do that or is there perhaps a better way to convert to vmware? Help!

  Read the article

• Limiting and redirect port access with useragent

  - by linuxcore

  I'm trying to write iptables string match rule To block http://domain.com:8888 and https://domain.com:8888 when it matches the supplied string in the rule. And another rule to redirect the ports also from 8888 to 7777 I tried following rules but unfortunately didn't work iptables -A INPUT -p tcp -s 0.0.0.0/0 -m string --string linuxcore --algo bm --sport 8888 -j DROP iptables -t raw -A PREROUTING -m string --algo bm --string linuxcore -p tcp -i eth0 --dport 8888 -j DROP iptables -t nat -A PREROUTING -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j REDIRECT --to-port 7777 iptables -A INPUT -t nat -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j DROP I want to do this from iptables not the webserver because the server may not have a webserver and those ports are working on internal proxy or something like ..etc

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Set Final Cut Express Sequence Options 4:3 to 960p (30fps)

  - by Maccaius

  Hi I have an project in FCE which was recorded in MPEG-4 video in 1280 x 960 (1,4MB/s) and whenever I import those mov files to FCE thez show just fine. but when i add the clips to the timeline (sequence) the quality is cropped - instead of HD i can onlz export the timeline with quicktime conversion and a resolution of 720 x 480. can anybody help me out and tell me how i can export the timeline in full HD quality (as the raw material itself is)? tried the quick setup and exporting as divx and AIC which doesnt reallz work. the actual video size is HD, but qualitz of the video is like SD...

  Read the article

• How can I make a non-destructive copy of a (NTFS) partition?

  - by violet313

  I want to recover some deleted files from a healthy NTFS partition on an undamaged hard-disk. In order to leave the partition undisturbed, i plan to use dd to clone the partition to a raw image file & then attempt recovery from that mounted clone. Will dd if=/dev/sd<xn> of=/path/to/output.img perform a non-destructive copy ? Is attempting a restore from a clone using dd the best approach? [edit, wrt Deltiks answer, i need to be a bit clearer about what i'm asking] eg: are there some s/w that can do something more with the original sectors ? eg: if it was a damaged hard-disk i am aware that any kind of read is potentially destructive. but assuming my disk head is not going to suddenly spaz out etc, am i reducing my chances of a successful recovery (at any cost) by using an apparently non-destructive single read of my undamaged hard-disk. (btw: i am planning on using ntfsundelete & testdisk for recovery)

  Read the article

• Consume an XML Feed with PowerPoint 2010

  - by Matt Schweers

  Hi there. I'm looking for a way to consume an XML feed from a web-service directly into PowerPoint 2010. I found the LiveWeb plugin (http://skp.mvps.org/liveweb.htm) for PowerPoint that, while pretty cool, really only pulls in actual web content in a way that feels more like an iframe. Ideally, I would like to consume raw XML web service/feed with PowerPoint, parse it, and stylize the results. Is this possible? Even reading from a static XML file would be a good start.

  Read the article

• How do I completely turn off Excel 2010 autoformatting?

  - by Samuel

  I am using a lot of csv files at work with excel 2010. These have no formatting so Excel 2010 autoformats all the cells. I've found workarounds but the ones I have found require action for each file or each cell (i.e. adding a single quote). My current workaround is using the "show formulas" option under formula auditing in the formulas tab. This seems to show the raw data (since they are just csv files there aren't formulas). If I could just keep this active so I don't have to turn it on.

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >