Search Results

Search found 2744 results on 110 pages for 'tommy o dell'.

Page 84/110 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• What disk setup is needed / best practice for hypervisor-only servers?

  - by Luke404

  Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

  Read the article

• Why is my metro screen getting extended to half of the second screen?

  - by maximusyoda

  When I extend my desktop to the second screen, it stays fine for a few minutes, but after a while, the first metro screen stretches all the way to half of the second screen. The search bar etc stops working. The desktop itself shares fine. But the metro screen is messed up as well as the resolution. The second screen is using the recommended resolution. All I want is to have an extended screen. The problem occurs in my office Windows 8 laptop as well. Not sure what to do with it. Device: Surface Pro 2 External Monitor: Dell 2208WFP 1680 x 1050 Pixel Resoultion 22''

  Read the article

• One NIC going to sleep on Centos system

  - by sbleon

  I have two Dell boxes with two ethernet ports a piece. I have a cable directly connecting two of these ports, creating a tiny LAN with 10.3.3.x addresses. The other port on each box is hooked up to a switch and has a DHCP-supplied address to talk to the outside world. I've noticed that when scp'ing large files from one box to the other over the private LAN, the transfers sometimes stall. It appears that any other network activity on either box will cause the transfer to resume. Wake-on-LAN is disabled on all interfaces according to ethtool. What else could be causing these stalled transfers?

  Read the article

• Do I need to run a verfication on LTO tape backups even though the drives themselves perform verification as they write?

  - by ObligatoryMoniker

  We have an LTO-3 Tape drive in a Dell media library that we use for our tape backups. The article about LTO on Wikipedia states that: LTO uses an automatic verify-after-write technology to immediately check the data as it is being written, but some backup systems explicitly perform a completely separate tape reading operation to verify the tape was written correctly. This separate verify operation doubles the number of end-to-end passes for each scheduled backup, and reduces the tape life by half. What I would like to know is, do I need my backup software (Backup Exec in this case) to perform a verify on these tapes or is the verify-after-write technology inherent in LTO drives sufficient? I would also be curious if Backup Exec understands the verify-after-write technology enough to alert me if that technology couldn't veryify the data or will it just ignore it making it useless anyway since even if the drive detecs a problem I would never know about it.

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• Windows 7 Skype shifts audio to speakers

  - by Greg Reynolds

  I have noticed a strange feature on my Dell Latitude running Windows 7 and Skype. When I am listening to music on the headphones, and Skype rings, then the audio I was listening to is redirected to the computer speakers, while Skype takes over the headphones. This is infuriating as my co-workers are treated to 1 second snippets of whatever rubbish I have on at the time. Any ideas on how to stop this happening? I messed with some of the settings on Skype, but nothing seems to make any difference.

  Read the article

• how to design network for connectivity between private and corporate LANs?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services) these hosts need to be from outside of the datacenter Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software? currently available hardware : Dell Powerconnect 6224 switch .... planning this for storage network. software: windows 2003 server for DHCP, DNS, A/D ? would it be more flexible to use Linux distributions like IPCOP, Untangle etc? all that I am looking for is good isolation between private and other networks, avoid DHCP, DNS, AD clashes.

  Read the article

• Redundant APC UPS units, single server set up

  - by Sholom

  Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

  Read the article

• Why am I seeing excessive disk activity when installing applications?

  - by Kev

  I'm running Windows 7 Ultimate 64 bit on a Dell Vostro 1720 with 8GB of RAM, 7200RPM Disk, 2.53 GHz Core2Duo (Windows 7 64 bit is a supported option and the laptop came with the OS pre-installed). I'm noticing some fairly excessive disk activity when running installers. For example the Visual Studio 2010 RC installer constantly accessed the disk for ~10 minutes. It was so excessive that I was unable to use the machine until this ceased. Today I installed Trillian Astra 4.1 for Windows (latest build from the website). Again when I ran the installer I was pretty much locked out of the machine until the disk activity calmed down. In both cases when I eventually managed to launch task manager I could see that the CPU was sitting at around 5% to 7% utilisation whilst this was going on. All other disk related activity is fine, the machine is snappy and applications launch without delay. It's just when I run an installer I see this odd behaviour. Why would this be?

  Read the article

• Unable to diagnose Windows 7 lockup

  - by Delyan

  Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

  Read the article

• Reimage several of the same model PC by copying the hard disk

  - by Tim Lehner

  I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

  Read the article

• Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

  - by Evan

  I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

  Read the article

• Connecting server to more than one switch.

  - by Jake

  I have 3 switches, one NEATGEAR GS748T and two JGS524. Initially I wanted to connect them in a triangle loop, but later suspect that the JG524 does not have spanning tree support. Now I have a Dell R710 with 2 NIC at the back. If I connect the server in between the two JGS524, which both in turn connect to the GS748T, will that consitute a loop? According to my limited understanding, with 2 NICs there will be 2 IPs for the server. Will the file server even work or not? Theoretically speaking, will this configuration increase the access speeds for clients? Thanks.

  Read the article

• Sync files between two users on Windows-7 Enterprise

  - by Zachary

  I'm running Windows-7 enterprise on a dell Laptop, and I'd like to sync the entire user directory structure between two users. Background: I am an existing user on the computer, and soon I'll be sharing the computer with an employee. I want everything from my account to overwrite the other, while anything he does is mirrored on mine. I'm not worried about security because nothing vital is on the computer. Both accounts are administrators, and I have already tried to use hard links to accomplish this. However the prompt leaves me with "Access Denied". Is what I'm trying to do possible, and if so what steps must be done to accomplish it?

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• How can I fix an inconsistent NTFS file system without Windows?

  - by Demetri

  I have a Dell laptop that came with Windows from the factory. Since then, I have installed Linux and replaced the hard drive with an SSD. The NTFS partition is inconsistent (a result of bad sectors on the HDD) and needs to be fixed, but I cannot boot into Windows to run chkdsk. How do I fix this problem? Until I do, I cannot move my NTFS partition to expand space on my root filesystem, which is critically low. EDIT: All of my partitions were cloned from my dying HDD to my SSD via Clonezilla. There are no bad sectors on the SSD, but the NTFS partition is still in an inconsistent state.

  Read the article

• ESX - Initialization for vmfs2 failed with -1

  - by ov4

  I recently purchases a bunch of R710's from Dell. I installed VMWare ESX on them. The installation process finishes without a problem; however once ESX boots the following error displays at the botton with red letters: 00:00:02:21.493 cpu11:4119) mod:2971: Initialization for vmfs2 failed with -1 I installed on two different servers and the same error appears. The curious thing is that if I install ESXi 3.5 or 4 there is not problem. What does this problem mean, and how can I resolve it?

  Read the article

• Locking down firmware to keep stolen laptop from being formatted?

  - by Matt Ridge

  On the Mac laptops there are ways through the terminal to lock down the computer so that if someone tries to format the computer they won't be able to do it without the password. This way locks down the firmware. Is there a universal way to do the same thing on a PC? I know there are brands out there such as Samsung, Dell, etc that utilize different fimware types, and in turn will mean that their firmware will be locked down differently. That being said is there a "command code" that will allow you to lock the firmware to keep theives from formatting the hard drive and wiping out your data? I know a person who has time, and knowledge can get any password, and hopefully the person is smart enough to use another password to lock down the firmware, but that's not what I'm asking. I'm asking if it's possible, and if so how? Does the standard PC user require a 3rd party app, or can it be done through the command line? Or Terminal if you are on Linux?

  Read the article

• Windows XP screen chopped off

  - by msindle

  Ok this one has be confused as all get out! One of the teachers at the school I support has a dell latitude e5500 and the desktop shows about 3/4 just fine, but the right 1/4th shows whatever was on the last (like its not refreshing (yes I tried refreshing the screen)) For example if I open up internet explorer then minimize it the left 3/4ths minimizes, but the right 1/4th stays pulled up. Another interesting piece of information is that if I change it to God awful 800x600 it works perfectly fine. The sceen works together and has no problems.... The only way I have found to get rid of this is to reload the laptop and that is getting old quick! Thanks for your help! Msindle

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• SCSI driver installation trouble

  - by Vicky

  I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

  Read the article

• What causes random clicking/navigation sound while PC is idle?

  - by user14339

  On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

  Read the article

• Is there an application that can automatically set Graphics Properties when docking?

  - by Ken Liu

  I have a dual display setup with my laptop (Dell, with integrated graphics, WinXP). The problem is that whenever I hook up the laptop to the monitor I have to go to Graphics Properties (Intel Graphics Media Driver for Mobile) and set the display resolution, window position, etc. Note that this screen is different than the built-in one you usually see in WinXP. 1) Is there an app that can save display settings properly so they will come back when I dock again? 2) Barring this, run a script or a macro to automatically set up the display the way I want it. 3) Or, can I write a .Net program that does this for me? Extra points if there is an Open source app that can do this.

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >