Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 842/1008 | < Previous Page | 838 839 840 841 842 843 844 845 846 847 848 849  | Next Page >

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Why is uploading to S3 so slow?

  - by Tom Marthenal

  I am using s3cmd to upload to S3: # s3cmd put 1gb.bin s3://my-bucket/1gb.bin 1gb.bin -> s3://my-bucket/1gb.bin [1 of 1] 366706688 of 1073741824 34% in 371s 963.22 kB/s I am uploading from Linode, which has an outgoing bandwidth cap of 50 Mb/s according to support (roughly 6 MB/s). Why am I getting such slow upload speeds to S3, and how can I improve them? Update: Uploading the same file via SCP to an m1.medium EC2 instance (SCP from my Linode to the instance's EBS drive) gives about 44 Mb/s according to iftop (any compression done by the cipher is not a factor). Traceroute: Here's a traceroute to the server it's uploading to (according to tcpdump). # traceroute s3-1-w.amazonaws.com. traceroute to s3-1-w.amazonaws.com. (72.21.194.32), 30 hops max, 60 byte packets 1 207.99.1.13 (207.99.1.13) 0.635 ms 0.743 ms 0.723 ms 2 207.99.53.41 (207.99.53.41) 0.683 ms 0.865 ms 0.915 ms 3 vlan801.tbr1.mmu.nac.net (209.123.10.9) 0.397 ms 0.541 ms 0.527 ms 4 0.e1-1.tbr1.tl9.nac.net (209.123.10.102) 1.400 ms 1.481 ms 1.508 ms 5 0.gi-0-0-0.pr1.tl9.nac.net (209.123.11.62) 1.602 ms 1.677 ms 1.699 ms 6 equinix02-iad2.amazon.com (206.223.115.35) 9.393 ms 8.925 ms 8.900 ms 7 72.21.220.41 (72.21.220.41) 32.610 ms 9.812 ms 9.789 ms 8 72.21.222.141 (72.21.222.141) 9.519 ms 9.439 ms 9.443 ms 9 72.21.218.3 (72.21.218.3) 10.245 ms 10.202 ms 10.154 ms 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * The latency looks reasonable, at least until the server stopped responding to ping requests.

  Read the article

• How to deal with DELL support system?

  - by Nishant Kumar

  We have purchased a Dell Optiplex 9010 SSFV for our organization's work. Since the first installation two of the USB keyboard keys were not working properly. I had to press those keys two times simultaneously, on first time keys did not work and for for second time it printed two characters (as it were buffering first character.) Two keys that were not working properly: Hexangrave (Below the ESC key: `) Double Quotes (Left the enter key ") We registered our complaint with DELL and they suggested (with some hard to understand and weird ENGLISH accent) some test and tricks, such as switching to different ports, checking keyboard on different PC, and it worked well with diff. PC(with Windows 7 Home Premium installed). It was clear that it is an OS fault, hence they suggested to re-install OS. Problem began here, we have a project on the run and currently a video editing project setup on our system, so can't re-install system in hurry and also DELL persons were not providing any other solution such as updating keyboard driver, etc. Arguments I am a Software Engg. and don't think it is a feasible solution to re-install entire system for simple problems. This prob is coming since the fresh system installation, so I don't think it will solve the problem. Finally, I had to find solution myself and got it here, now I want to show my disappointment to dell persons or at least tell them that they should improve there support system to not advice to re-install entire system for that simple problems. Notes We have purchased 5 years NEXT business day support from DELL for around 8000 INR (Not for that kind of solutions from DELL). It is Dell India Support System. So can anyone tell me how to tackle dell support system officially, so that they will pay more attention in near future. Thanks

  Read the article

• Ubuntu 9.10 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB. NOTE - This same system, except for the hard drive, had Windows XP running on it. The user who ran it said that the RAM was good and always showed 1.5 GB. Here is sudo cat /proc/meminfo MemTotal: 250064 kB MemFree: 3832 kB Buffers: 13356 kB Cached: 52216 kB SwapCached: 19676 kB Active: 91504 kB Inactive: 113884 kB Active(anon): 60572 kB Inactive(anon): 82156 kB Active(file): 30932 kB Inactive(file): 31728 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 250064 kB LowFree: 3832 kB SwapTotal: 4883720 kB SwapFree: 4781204 kB Dirty: 496 kB Writeback: 720 kB AnonPages: 123796 kB Mapped: 23368 kB Slab: 17248 kB SReclaimable: 7932 kB SUnreclaim: 9316 kB PageTables: 5304 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5008752 kB Committed_AS: 740372 kB VmallocTotal: 770600 kB VmallocUsed: 26008 kB VmallocChunk: 662544 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 114128 kB DirectMap4M: 147456 kB

  Read the article

• Trying to run QEMU with a file as hda

  - by Felix

  I'm trying to run QEMU and use a simple file on the host system as the guest's hard drive. Here's what I attempted so far: $ dd if=/dev/zero of=/home/felix/vm/archlinux.img bs=1MB count=8192 8192+0 records in 8192+0 records out 8192000000 bytes (8.2 GB) copied, 86.6054 s, 94.6 MB/s $ qemu -hda /home/felix/vm/archlinux.img -cdrom archlinux-2009.08-netinstall-i686.iso -boot d Then I try to install Archlinux to that file. It goes pretty well (it's able to format it from what I can tell) until I start installing packages, when I get errors like this: And, of course, everything goes downhill from there (unable to mount the partition, corrupted files, ...). What am I doing wrong? Note: I'm just doing this for entertainment purposes. I don't intend to actually use this on servers or anything. The only use I can think of for this kind of installation would be to actually get an 8GB USB stick and dd that file to it and wham! You have a bootable stick with a fully fledged and customized OS, and without torturing the stick through the installation.

  Read the article

• Reboot fails with "Invalid partition"

  - by Mike Clark

  My laptop can't reboot. Any time something restarts the laptop (e.g. to apply Windows updates, or Start Menu-Restart, etc), the computer sits at a black screen with the message "Invalid partition" displayed in console text. When this happens, I power off the computer, then power it back on, and it boots up fine. OK, now the history behind this: This laptop is a new Dell. The day I got it, I used gparted to reclaim 30 GB of disk space that had been allocated to a "recovery partition" in the middle of the laptop's primary drive. (I have DVDs for recovery and I didn't want to waste 30 GB of SSD space on recovery data.) So I used gparted to delete the recovery partition and resize the primary Windows partition to use up the new free space. As expected when resizing a boot partition, the computer would no longer boot. I used Windows Recovery Console to fix the boot process: FIXMBR C: FIXBOOT C: BOOTCFG /rebuild This worked fine and the computer boots up fine. But, as mentioned earlier, the laptop still can't reboot. Any idea on how to fix this without completely reformatting the disk and reinstalling Windows from scratch? It's Windows 7.

  Read the article

• Are these computer parts compatible?

  - by Jcubed

  so I'm building a computer and i want to know if all these parts are compatible. case: http://www.amazon.com/Xion-Gaming-Steel-Tower-Computer/dp/B002139YSS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270923001&sr=8-1 power supply: http://www.amazon.com/Thermaltake-W0121RU-PurePower-Version-PCI-Express/dp/B0015MCMRG/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924656&sr=1-1 motherboard: http://www.amazon.com/GIGABYTE-GA-EP45-UD3P-LGA-Intel-Motherboard/dp/tech-data/B001HH2WE2/ref=de_a_smtd processor: http://www.amazon.com/Intel-Processor-1333MHz-LGA775-BX80570E8400/dp/B00116SLYY/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924524&sr=1-1 hard drive: http://www.amazon.com/Western-Digital-Caviar-Black-WD1001FALS/dp/B001C271MA/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924586&sr=8-1 DVD/Blu Ray Dive: http://www.amazon.com/LITE-Blu-ray-Internal-Optical-iHOS104/dp/tech-data/B002EE996Q/ref=de_a_smtd Graphics Card: http://www.amazon.com/Sapphire-Radeon-100252HDMI-PCI-Express-Graphics/dp/B001SJLLTQ/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924798&sr=1-1-spell Sound Card: http://www.amazon.com/Creative-Labs-SB0570L4-Blaster-Audigy/dp/B000LP0R3E/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924850&sr=1-1 Memory: http://www.amazon.com/Corsair-TWIN2X4096-8500C5DF-Dominator-PC2-8500-1066MHz/dp/B0014Z0Q04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924896&sr=1-1-spell OS: Ubuntu 64-bit

  Read the article

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• Upgrading Visio 2000 to Visio 2007

  - by dirtside

  I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

  Read the article

• Why is mkfs overwriting the LUKS encryption header on LVM on RAID partitions on Ubuntu 12.04?

  - by Starchy

  I'm trying to setup a couple of LUKS-encrypted partitions to be mounted after boot-time on a new Ubuntu server which was installed with LVM on top of software RAID. After running cryptsetup luksFormat, the LUKS header is clearly visible on the volume. After running any flavor of mkfs, the header is overwritten (which does not happen on other systems that were setup without LVM), and cryptsetup will no longer recognize the device as a LUKS device. # cryptsetup -y --cipher aes-cbc-essiv:sha256 --key-size 256 luksFormat /dev/dm-1 WARNING! ======== This will overwrite data on /dev/dm-1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: # hexdump -C /dev/dm-1|head -n5 00000000 4c 55 4b 53 ba be 00 01 61 65 73 00 00 00 00 00 |LUKS....aes.....| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000020 00 00 00 00 00 00 00 00 63 62 63 2d 65 73 73 69 |........cbc-essi| 00000030 76 3a 73 68 61 32 35 36 00 00 00 00 00 00 00 00 |v:sha256........| 00000040 00 00 00 00 00 00 00 00 73 68 61 31 00 00 00 00 |........sha1....| # cryptsetup luksOpen /dev/dm-1 web2-var # mkfs.ext4 /dev/mapper/web2-var [..snip..] Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done # hexdump -C /dev/dm-1|head -n5 # cryptsetup luksClose /dev/mapper/web2-var 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400 00 40 5d 00 00 88 74 01 66 a0 12 00 17 f2 6d 01 |.@]...t.f.....m.| 00000410 f5 3f 5d 00 00 00 00 00 02 00 00 00 02 00 00 00 |.?].............| 00000420 00 80 00 00 00 80 00 00 00 20 00 00 00 00 00 00 |......... ......| # cryptsetup luksOpen /dev/dm-1 web2-var Device /dev/dm-1 is not a valid LUKS device. I have also tried mkfs.ext2 with the same result. Based on setups I've done successfully on Debian and Ubuntu (but not LVM or Ubuntu 12.04), it's hard to see why this is failing.

  Read the article

• problem booting crusty old windows XP

  - by Carson Myers

  I have an acer aspire laptop running Windows XP home. I believe I have some virus on it, I'm not sure--I mostly just run linux in a VM on it so I wasn't too worried. I'm not sure if that virus caused this problem. The laptop wasn't recognizing my USB hard drive for some reason so I decided to restart it. When it started up, it got past the memory test, past the boot screen, (but it paused right here on a blank screen for awhile) and flashed the desktop once (like it does just before the login screen) and then crashed. I got a quick BSOD and then it restarted. Then it tried to boot again, etc etc infinite loop of failure. Well, before trying safe mode, I disabled automatic restart on system crash so I could read the blue screen. There wasn't anything important on it, it said *** STOP: 0x00000000 (0xC0000000 0x,.... ) beginning physical memory dump physical memory dump complete That's not verbatim (obviously) but it didn't help me. so I booted in safe mode, and it stopped on the driver gagp30kx.sys and then restarted (and infinite loop of failure again). I burned a recovery CD and tried that. It loaded it, and I went into repair mode. I ran chkdsk and then disabled the AGP driver. Same thing on booting in safe mode except it stopped at mup.sys instead. I enabled the AGP driver again, and ran chkdsk again from the CD. It said it found problems but didn't say it fixed them. So I ran it a second time, and it said "performing additional checking or recovery" lots of times (I can't tell how many, they went above the screen top). I tried booting again and no luck. Every time I run chkdsk after trying to boot again it says it found and fixed more errors. I think it might be whatever driver is after the AGP driver, but I don't know what it is or how to find out. Can anyone help me fix this?

  Read the article

• centos 6 debuginfo repository does not have httpd debug version available

  - by Zippy Zeppoli

  I am trying to get the debug version of httpd so I can use it in conjunction with gdb. I am having a hard time getting them, and they don't seem to be in the standard epel-debuginfo repository. What should I do? > [root@buildbox-rhel6 ~]# debuginfo-install httpd Loaded plugins: fastestmirror, presto enabling epel-debuginfo Loading mirror speeds from cached hostfile epel-debuginfo/metalink | 8.3 kB 00:00 * base: mirrors.cicku.me * epel: mirrors.kernel.org * epel-debuginfo: mirrors.kernel.org * extras: mirrors.arpnetworks.com * updates: linux.mirrors.es.net epel-debuginfo | 3.1 kB 00:00 epel-debuginfo/primary_db | 487 kB 00:01 Checking for new repos for mirrors Could not find debuginfo for main pkg: httpd-2.2.15-15.el6.centos.1.x86_64 Could not find debuginfo pkg for dependency package apr-1.3.9-5.el6_2.x86_64 Could not find debuginfo pkg for dependency package apr-util-1.3.9-3.el6_0.1.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package db4-4.7.25-17.el6.x86_64 Could not find debuginfo pkg for dependency package expat-2.0.1-11.el6_2.x86_64 Could not find debuginfo pkg for dependency package openldap-2.4.23-26.el6_3.2.x86_64 Could not find debuginfo pkg for dependency package openldap-2.4.23-26.el6_3.2.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package pcre-7.8-4.el6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package libselinux-2.0.94-5.3.el6.x86_64 Could not find debuginfo pkg for dependency package zlib-1.2.3-27.el6.x86_64 No debuginfo packages available to install

  Read the article

• How can I do an SELINUX filesystem relabel without rebooting first?

  - by Skaperen

  I can touch the file /.autorelabel and reboot and during the initialization coming back up it will do the SELINUX relabel for me. But I want to do this in a different situation where the system has just been copied to a hard drive image. I can chroot to the originating file tree, or chroot to the just populated device image and run it. I just can't find anything that says what to be run. This image is being made into an AMI on AWS EC2, and contains CentOS 6.3. But the time it takes to relabel is too long (6 minutes or more). I want to move the relabel to the image build where the extra time is not an issue (because it happens once instead of every time an AMI is launched). I can make this relabel be the very last thing just before the filesystem is unmounted for the last time until it becomes an AMI and will launch. I just need to know what to call to do it. I have searched man pages with no luck. I have searched system init scripts but where /.autorelabel is detected, it is unclear what is happening. Documents like http://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-sel-fsrelabel.html only tell how to do things that still really do the work after a reboot. I need to have the work doing BEFORE the "reboot" (unmount, build AMI, and launch ready to go). The big point is ... yes there will be a reboot ... but I want the relabel work to be done before that so it won't be done every time an AMI is launched (because it takes so long).

  Read the article

• How to find cause of main file system going to read only mode

  - by user606521

  Ubuntu 12.04 File system goes to readonly mode frequently. First of all I have read this question file system is going into read only mode frequently already. But I have to know if it's not caused by something else than dying hard drive. This is server provided by my client and I am just runing there some node.js workers + one node.js server and I am using mongodb. From time to time (every 20-50h) system suddenly makes filesystem read only, mongodb process fails (due read-only fs) and my node workers/server (which are started by forever) are just killed. Here is the log from dmesg - I can see there some errors and messages that FS is going to read-only, and there is also some JOURNAL error but I would like to find cause of those errors.. http://speedy.sh/Ux2VV/dmesg.log.txt edit smartctl -t long /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-23-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. What I am doing wrong? Same is for sda2. Morover now when I type any command that not exists in shell I get this: Sorry, command-not-found has crashed! Please file a bug report at: https://bugs.launchpad.net/command-not-found/+filebug Please include the following information with the report:

  Read the article

• BSOD trying to migrate Windows XP from a physical to a virtual machine

  - by pauldoo

  I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

  Read the article

• Mystery undeletable file

  - by Hugh Allen

  I can't delete C:\Config.Msi\75ce84f.rbf. it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

  Read the article

• How do I keep folders synced and backed up between two macs using a Linux NAS (rsync?)

  - by Hultner

  I've got two primary computers, one Mac Pro and one MacBook Pro for when I'm on the go. I've also got a Linux sever which also acts as NAS. Currently I backup the entire computers to an external drive with Time Machine which is rather useless and doesn't sync anything. What I really want to do is to keep my important files synced between both computers and my NAS (which is running RAID 5), that way I'm not backing up easily replaceable systemfiles and I've got all my important files in 3 places where two of them are running raid so at least 5 drives would have to crash at the same time before actual data loss occur. Folders I want to keep synced is basically my photo, documents, development, mamp and work folders and then I want to keep the user library folder backed up but not synced. I'm thinking that I'd have to use rsync but don't know how. Before suggesting Dropbox and similar suggestions I don't want to use them because of several reasons some of them being security (Dropbox obviously proved this), Speed (sometimes I'll sync gigabytes of data and that will be significantly faster locally and probably even through VPN as I have a Gigabit pipe), Space (space on my NAS is cheap and only practically limited by my needs), reliability (even if my internet were to go down I still need to be able to keep my files synced incase I'd need to go somewhere on the fly), price (I already have all the hardware and for the amount of gigabytes and bandwidth I'd need I doubt that there's any free or cheap service). Those are my main reason for wanting to keep it locally. I'm sorry for any spelling or grammatical mistakes that I've might have done. I'm writing this on my smartphone from a shaky train and English isn't my mother tongue. I gratefully appreciate any answers even if only partly solving my problem.

  Read the article

• Windows Vista will not boot; the file header checksum does not match the computed checksum

  - by Magnus

  Right out of the blue, my wife's Sony Vaio stopped booting. This, not so fun, error message displays immediately after POST: The system cannot boot. The file is possibly corrupt. The file header checksum does not match the computed checksum The repair option on the Vista DVD says everything is fine and dandy, it couldn't be more happier or more clueless... Any ideas? Update: CHKDSK reports no issues. CHKDSK /r reports no issues. (Heck, both Windows Repair and CHKDSK could just as well tell me that I have won on lottery or that the earth is flat... ) Some have reported that a mem diagnostic could help, but for me the mem diag has just ran through 5 passes. It doesn't seem to help. According to Sony, pressing F10 should bring up the restore menu, but it doesn't, the error pops up straight after Bios POST. It seems that this error is first in line of all options at this point, and is doesn't put a smile on my face. I have attached an external USB drive and copied all user data/documents to it. I feel an OS re-install is around the corner.

  Read the article

• Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

  - by dash-tom-bang

  Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Variable size encrypted container

  - by Cray

  Is there an application similar to TrueCrypt, but the one that can make variable size containers opposed to fixed-size or only-growing-to-certain-amount containers which can be made by TrueCrypt? I want this container to be able to be mounted to a drive/folder, and the size of the outer container not be much different from the total size of all the files that I put into the mounted folder, while still providing strong encryption. If to put it in other words, I want a program like truecrypt, which not only automatically grows the container if I put in new files, but also decreases it's size if some files are deleted. I know there are some issues of course, and it would not work 100% as truecrypt, because it basically works on the sector level of the disk, giving all the filesystem-control to the OS, and so when I remove a file, it might as well be left there, or there might be some fragmentation issues that would stop just truncating the volume from working, but perhaps a program can be built in some other way? Instead of providing sector-level interface, it would provide filesystem-level interface? A filesystem inside a file which would support shrinking when files are deleted?

  Read the article

• XP CD doesn't offer repair option

  - by SLaks

  I'm fixing an IBM Thinkpad laptop running XP Pro which doesn't boot all the way (It gets past the XP logo boot screen, a movable mouse cursor appears, and it doesn't get any further, even in safe mode) after being bumped a bit. I'd like to do a repair install. I booted it to an XP Pro CD, but the Repair install option (not recovery console) doesn't appear. After pressing F8 to accept the EULA, it says, Loading setupp.ini, then immediately goes to a partition list (it never says Searching for previous installations of Microsoft Windows). If I select the partition, it warns me that there is already a Windows installation in that partition, and that it will be completely obliterated if I continue. (So I know that it does see the contents of the hard disk) I booted the same CD in an XP virtual machine, and it offered to repair the XP installtion in the virtual machine, so the problem isn't with the CD. Does anyone know how make it do a repair install (or have any other ideas to solve the problem?) It might not show up because it's an OEM installation (but not an OEM CD), but that's just a guess.

  Read the article

• Plesk 10 - creating and using vhost.conf

  - by MrFidge

  I'm having some issues setting up and using a vhost.conf for one of my domains. So far none of the domains have required any extra configuration but now I need to use a PEAR module, so I'm looking to include /usr/share/pear in the PHP settings for the domain. vhost file created in /var/www/vhosts/domain.com/conf/vhost.conf <Directory /var/www/vhosts/domain.com/httpdocs> php_admin_value include_path ".:/usr/share/pear" </Directory> I then restart Plesk using: /usr/local/psa/admin/sbin/websrvmng --reconfigure-vhost --vhost-name=domain.com Or as plesk says that command is obsolete in Plesk 10 I've tried using /usr/local/psa/admin/sbin/httpdmng --reconfigure-domain domain.com And for good luck I've restarted apache too each time. Net result - none of the PEAR includes work unless I edit the include_path in /etc/php.ini! Any tips on how to get this MOFO working? I've had a look through the documentation but TBH I just don't have time to read 40 pages of Plesk manual for one line of code, this can't be that hard, surely! Thanks for any pointers, H

  Read the article

• Install Ubuntu 10.10 from loopback mounted ISO image

  - by Zifre

  I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

  Read the article

• Automatically install driver on headless WHSv1 system

  - by Dan Neely

  I have one of the HP Mediasmart Windows Home Server v1 boxes. It's network port appears to have died a few days ago but the system is not giving any other sign of failure: No activity lights activate on either side of the cable when connected to my gigabit switch; when connected to one of my routers 100 megabit ports the lights turn on but it remains unreachable over the network and my router never lists it as among DHCP clients. I bought a USB-ethernet adapter to temporarily get it back online; but the adapter needs a driver to work which I can't install because the system is headless by design (no video out, no PCI/PCIe slots) with admin access only available via the WHS client or remote desktop. Both of those options require network connectivity and are consequently unavailable. I tried copying the drivers to a flash drive; but Windows either didn't look there or none of the drivers provided were suitable (Win8, Win7, or combined XP and Vista). I've been told that a USB WiFi adapter would have the same driver problem.

  Read the article

< Previous Page | 838 839 840 841 842 843 844 845 846 847 848 849  | Next Page >