Search Results

Search found 28828 results on 1154 pages for 'i heart ubuntu'.

Page 845/1154 | < Previous Page | 841 842 843 844 845 846 847 848 849 850 851 852  | Next Page >

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

• How do I join a channel on Freenode with Empathy?

  - by sadmicrowave

  I have empathy already installed but am not sure how to configure it to join the channel at http://www.ape-project.org. I do not have a password or login name yet to properly configure the channel with Empathy and when I click "Join our IRC Channel" firefox comes back with an error stating: Firefox doesn't know how to open this address, because the protocol (irc) isn't associated with any program. What can I do to join this (freenode) channel? UPDATE 1 Using Empathy Version 2.23.1 When viewing accounts click "Add..." Protocol: "IRC" Network: "freenode" create new nickname, password, and real name. Then went back to ape-project.org link and click "Join our IRC Channel" again. It brings my Empathy contact list to the foreground but nothing happens...

  Read the article

• Getting all available packages to install

  - by Mustafa

  I need to see all the packages that are available to install via a command so I can use it in another program. I tried dpkg -l but it only gives the installed packages. The output is like this: ii apache2-utils 2.2.22-1ubuntu1 utility programs for webservers It is so similar to Synaptic output, so is there a common command like this am I missing? apt-cache is helpful but not it is not in the above format.

  Read the article

• How to upgrade a particular package dependencies only?

  - by zerkms

  Let's say I have a package A which has Depends: B (>= 1.0.0) in its control file. The B was installed as an A dependency some time ago with 1.0.0 version. Now B was updated in the repository to the 1.0.42 version and I'd like to upgrade it. What I don't like to do: apt-get install B since it will mark B as "manually installed" (not sure how to name it correctly) package and it won't be removed with autoremove if I decide to stop using A ever. So is there an analogue of apt-get upgrade that only upgrades a particular package and its dependencies (probably recursive, it doesn't matter in my case since B doesn't depend on anything else) only?

  Read the article

• Is my hard drive about to fail?

  - by Cody Harlow

  I hear some squeaking noises sometimes when I use my computer so I ran smartctl. This is the results: === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 5953 37922655 # 2 Extended offline Completed: read failure 90% 5953 37922655 # 3 Short offline Completed: read failure 90% 5953 37922655 # 4 Short offline Completed without error 00% 429 - # 5 Extended offline Aborted by host 90% 429 - # 6 Short offline Completed without error 00% 429 - # 7 Short offline Completed without error 00% 429 - Is this a bad sign?

  Read the article

• Reverse X11 forwarding

  - by Oli

  I was playing with my phone (that runs a Linux/X stack) last night and I managed to ssh into my desktop and run an application and have it show up on my phone. It was awesome. Today I'd like to sort of do the opposite. I want to view an application running on my phone on my PC. I could install a SSH server on my phone but I frankly don't fancy that purely for security reasons. I want this to be initiated from my phone. Is there a way to connect from my phone and tunnel the PC's X connection back to the phone and then run an application on the phone that show on the PC?

  Read the article

• Some files not copied when moving an encrypted home to a different partition

  - by Jon Herrin

  I have "successfully" moved my encrypted home to a separate partition using the instructions here: How can i move an encrypted home directory to another partition? However, some files are not being copied over. Most notably, I have a directory in my old home that contains the themes I use. This directory and it's contents are not copied over to the new home and therefore I come up with the default theme. Permissions on the directory that was not moved are identical to the other directories in home. Another discrepancy is that my Dropbox folder came over empty and had to resync itself. My concern is what else might be missing from the copied home. At this point, I've flipped back to the old home by re-editing /etc/fstab, but I'd really like to get /home cleanly and completely off of root without having to core the system.

  Read the article

• Install a different version of a package

  - by Michael Wiles

  I'm running lucid server and have installed tomcat. The version it installed is 6.0.24-2ubuntu1.6. Is this the version I'm tied to? Is it possible to install a more recent version? The one available from maverick is 6.0.28. Maybe I can add a source to provide my lucid install with this version? In the package manager user interface I can "force version". Is it possible to force version from command line alternative as well?

  Read the article

• How to fix AVI index error

  - by Tim

  I try to open an AVI file. The first software I tried is VLC media player. It reports some error about AVI index: This AVI file is broken. Seeking will not work correctly. Do you want to try to fix it? This might take a long time. I chose yes, and it began fixing AVI index and existed when the repair progress bar reaches 20% or so. Then the video started playing and stopped much earlier than when it is supposed to finish. Next I tried to open it in Totem Movie Player, which also stopped earlier at the same place as in VLC player. I tried to play it in GMplayer. Now the entire AVI file can be played from start to finish, but it is impossible to drag playing progress bar while it was possible in VLC player and Totem player. I heard that Avidemux can fix AVI index error, but later discovered it even failed to open the AVI file before it could try to fix the error. So I was wondering how I can fix the AVI index error, or at least drag the playing progress bar in GMplayer? Thanks and regards!

  Read the article

• Replacing LF, NEL line endings in text file with CR+LF

  - by Tomas Lycken

  I have a text file with a strange character encoding that I'd like to convert to standard UTF-8. I have managed to get part of the way: $ file myfile.txt myfile.txt: Non-ISO extended-ASCII text, with LF, NEL line endings $ iconv -f ascii -t utf-8 myfile.txt > myfile.txt.utf8 $ file myfile.txt.utf8 myfile.txt.utf8: UTF-8 Unicode text, with LF, NEL line endings ## edit myfile.txt.utf8 using nano, to fix failed character conversions (mostly åäö) $ file myfile.txt.utf8 myfile.txt.utf8: UTF-8 Unicode text, with LF, NEL line endings However, I can't figure out how to convert the line endings. How do I do to replace LF+NEL with CR+LF (or whatever is the standard)? When I'm done, I'd like to see the following: $ file myfile.txt myfile.txt: UTF-8 Unicode text

  Read the article

• sound stopped working after upgrade to 11.10 on Tuesday 20th March

  - by Hugh Barney

  My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

  Read the article

• Connect to MySQL on remote server from inside python script (DB API)

  - by Atul Kakrana

  Very recently I have started to write python scripts that need to connect few databases on mySQL server. The problem is that when I work from office my script works fine but running a script from my home while on office VPN generates connection error. I also noticed the mySQL client Squirrel also cannot connect from my home but works fine on Office computer. I think both are giving problem for the same reason. Do I need to create a ssh tunnel and forward the port? If yes how do I do it? mySQL is installed on server I have ssh access. Please help me on this AK

  Read the article

• Click and Drag from Clickpad stops working after a while 12.04

  - by Jason O'Neil

  I've got a Samsung Notebook (NP-QX412-S01AU) with a touchpad / clickpad. I'm running 12.04 Precise. When I first log into my computer, the touchpad behaves exactly as expected and desired. The longer I stay logged in, it slowly degrades. I'll try describe it. There are 3 ways of "dragging" on this clickpad: (Physical) click and hold with one finger, and drag around while still holding it down. All with one finger. (Physical) Click and hold with one finger, then with another finger drag around to move cursor. Double tap (not a physical click) and on the second tap, hold and drag. I most naturally use option 1, but here's how it works: When I first turn on, options 1, 2 and 3 all work. After a while, only options 2 and 3 work. Later still, only option 3 works. Restarting X causes all 3 to work again. I've compared the output of "synclient" in each of the states, and there was no difference. Anybody know what to look at? Or at the very least, a command I can run to "restart" the mouse driver without restarting X?

  Read the article

• Blank pale blue screen with Live USB Kubuntu on AMD Sempron 2800+ processor

  - by WGCman

  I am trying to install Kubuntu onto a USB stick to use on my Acer Aspire 1362 laptop with an AMD Sempron 2800+ chip. Using Windows XP, I downloaded and saved to the laptop's hard drive: kubuntu-2.04.1-desktop-i386.iso from the GetKubuntu website and LinuxLive USB Creator 2.8.16.exe from the Linux live website I then installed the latter and ran it, installing the kubuntu onto the Memory stick. Leaving the Bios setup unchanged, the USB stick is ignored and Windows boots. If I change the Bios boot order so that the memory stick takes precedence, I see a dark blue screen announcing Kubukntu 12.04, and on selecting either “live Mode” or “Persistent mode”, messages flash by quickly, some of which appear to be error messages, including “trying to unpack rootfs image as initramfs”, “cannot allocate resource for mainboard”, “no plug and play device found”. Eventually I see a pale blue screen with four moving dots announcing Kubukntu 12.04, similar to the login screen of my Kubuntu desktop, but no invitation to log in or indeed any dialog. After several minutes, this changes to a black screen with more messages including “no caching mode present”, “ADDRCONF(NETDEV_UP): wlan0: link is not ready”, then degrades to a blank pale blue screen which can only be moved by switching the computer off. Finding no way to log the error messages passing by, I managed to photograph most of them, but know no way to attach the photo to this forum. As suggested by User 68186 (to whom thanks!), I have edited my original post to reflect the recent progress, so the following two comments are now superseded.

  Read the article

• How can I cleanup a botched Truecrypt installation?

  - by Don F

  I made the mistake of downloading the X64 version of Truecrypt and trying to install it when I'm actually running the 32-bit version of Precise Pangolin. I want to clean up the files that I am unable to use, but of course I can't just run the uninstall since Truecrypt could not be installed in the first place. I am new to this but I have spent some time researching the command line. When I run "locate trucrypt -i" in the terminal I receive several relevant files in the usr/bin and usr/share directories. No "rm" commands work on these listed files--I only get "no such file or directory" back. I'm sure this has something to do with permissions but I don't know what I'm missing here. Why is it I cannot find these files through the GUI (even when I select "show hidden files") or when I try to navigate to these files via the terminal using cd and ls commands? How can I remove these files (they are there aren't they?), one way or another, from my system? Your patience and time are appreciated

  Read the article

• Web browser downloads only open target folders - cannot open files

  - by Pavlos G.

  After installing xubuntu packages in order to check xfce, I reverted back to gnome2. During the first login, I noticed that thunar was now selected as the default file manager. Preferred applications menu is also missing now, so I could not set nautilus as the default. I removed all the xubuntu packages (including thunar) and then when I tried to open a folder, I was asked to select the default file manager - that's how I got nautilus back. The next problem I'm now facing has to do with the downloaded files from web browsers: Open and Open containing folder options produce exactly the same result. If I double-click on a file, it'll just open the containing folder, instead of opening the file with it's associated application (e.g. libreoffice writer for .doc,.odt, smplayer for .avi,.wmv, etc). The problem happens both in Firefox and Chrome. Through nautilus, all files open correctly. Up until now I've tried the following: Delete/recreate mimeTypes.rdf in my FF profile Create a new profile in FF Delete/recreate ~/.local/share/applications/mimeapps.list Already checked this similar article None of them worked. Any ideas on the issue would be appreciated.

  Read the article

• I cancelled gparted operation ,what to do next?

  - by abcd

  I cancelled gparted operation by mistake .Now one of the partition became corrupted ,what to next? Should I format it? Data is important to me ;( Edit1: I tried to recover partition using testdisk and successfully recoverd losted partition ,but another partition(an extended partition containing ubuntus ) gone ,How to recover it? :) Edit2: testdisk saved my life ,it recovered all my partition without losing data ,

  Read the article

• Why does DVD playback still not work after installing libdvdcss2?

  - by mac9416

  I have installed libdvdcss2, but I still get this error when trying to play DVDs: libdvdread4 was installed by default (This is a new System76 Pangolin Performance). I ran the install-css.sh script, and it completed with no problems. I can confirm that libdvdread4 and libdvdcss2 are installed: mac9416@charlotte:~$ dpkg -l | grep dvdcss ii libdvdcss2 1.2.12-0.0medibuntu1 Simple foundation for reading DVDs - runtime libraries mac9416@charlotte:~$ dpkg -l | grep dvdread ii libdvdread4 4.2.0-1ubuntu3 library for reading DVDs

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• Need help with exploring a USB drive

  - by Bob Getsla

  When I plug in a USB drive, I see it on the left hand edge of the Unity desktop (11.10, 64 bit) but when I try to explore it, VLC starts and tries to play whatever it can find in the USB drive. This behavior began when I updated from 11.04 to 11.10. I literally cannot look into the contents of any of the USB drives I have, because I cannot stop VLC, nor can I do anything when I click Open other than watch VLC start up. This is very frustrating because it makes my USB sticks essentially useless. HELP! I'm sure that there is something a wizard could do about this, but I am not a wizard, and I am at my wits ends. Trying to get to the System Settings menu works, and I can see the setup for "Removable" devices, and they are all set to "Ask" but that is clearly not what is happening. So it looks like I must reach for the command line, but where do I go to find the settings for what the desktop does when I plug in a USB drive and wish to explore the file structure in it and possible copy a file into the USB or from the USB drive. Right now, VLC media player is always getting in my way. :-(

  Read the article

• How to disable Alert volume from the command line in Natty?

  - by Bryce

  There is an option in the Sound Preferences dialog, Sound Effects tab, to toggle Alert volume 'mute'. It works and suffices for my needs to disable the irritating system beep/bell. However, I reinstall systems a LOT for testing purposes and would like to set this setting in a shell script so it's off without having to fiddle with a GUI. But for the life of me I can't seem to find where this can be toggled via a command line tool. I've scanned through gconf-editor, pulseaudio's pacmd, grepped through /etc, even dug through the gnome-volume-control source code, but I am not seeing how this can be set. I gather that gnome-volume-control has changed since a few releases ago. I'm using Natty fwiw. Ideas?

  Read the article

• Why are the packages found with apt-get always horribly out of date?

  - by Andrew

  Whenever I use the package manager, it can only ever find really old versions of stuff. Example: sudo apt-get update sudo apt-get install postgresql The best it can do is version 8.4 (3 years out of date). Trying to get a later version, I get: $ sudo apt-get install postgresql-9.1 Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package postgresql-9.1 I experience the same issue whenever I use the package manager, so I usually just download and build things from source. How can I make it find up-to-date software?

  Read the article

• Help with creating bootable usb from iso

  - by Deus Deceit

  --All this is about terminal-- I know some of you will laugh, but I'm trying to install Arch Linux, since I want to learn as much as I can about linux system and how it works. I want to be an expert (maybe in 1000 years, but that's okay :)). The problem is that even tho I know how to do some stuff under linux I'm having a hard time with those names about hard drives, usb, cd, blah blah and how to access them. Big introduction and no question yet, but the purpose is for you to see where I'm standing and give me as many details as possible. And here's the question: How can I put the .iso file in a usb that will run on computers startup and allow me to install Arch linux? Details as to how to turn my pc on and hit F8 or whatever can be discarted lmao :) Ty in advance.

  Read the article

• Gaming with ATI open-source drivers

  - by user7174

  I have recently bought humble bundle 2 ( http://www.humblebundle.com/ ). Is there a way to run Braid using ATI's open-source drivers? The game always crashes. When do get it to start in windowed mode once i go to the first level it will crash. I am using the lastest version of Braid (ST3C ignored) When I use the proprietary drivers Braid works flawlessly and World of Goo performance is increased. However there is terrible screen tearing with the ATI propritary drivers. So my question is: How do I play Braid if I want to use the proprietary drivers?

  Read the article

• How can I install the Unity Photo Lens

  - by Chuqui

  I can't install the Photo Lens. After running these commands: sudo add-apt-repository ppa:scopes-packagers/ppa sudo apt-get update && sudo apt-get install unity-lens-photo unity-scope-shotwell unity-scope-flickr I get this: Package unity-lens-photo is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'unity-lens-photo' has no installation candidate Is there a fix for that? Thank you very much.

  Read the article

< Previous Page | 841 842 843 844 845 846 847 848 849 850 851 852  | Next Page >