Search Results

Search found 3993 results on 160 pages for 'broken pipe'.

Page 85/160 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• How to "restart/repair" an USB port?

  - by Click Ok

  My laptop have 2 usb ports, but one is broken, so I use an USB hub in the another good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detects the mouse and keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... So, I wonder if there is some method/software/etc to "restart/repair" the USB port without restart the PC. Thanks for all!

  Read the article

• HP Pavillion dv6 laptop - 15 beeps on startup and a black screen?

  - by dunc

  Usual story - girlfriend's step-brother's laptop is broken. I don't know a huge amount about what occurred before it broke, but I do know the following: When you try to turn the laptop on, it beeps 15 times exactly. The screen remains black. The LED on the Caps Lock key flashes continuously. If left on, the laptop never boots - as far as I can see. If left on, on a stable surface with decent ventilation for a relatively short period of time, the laptop (below keyboard, but not where the RAM/HDD are) gets very hot. I've tried doing what most websites appear to recommend for similar problems, which is to disconnect AC and battery then hold the power button down for a minute before reconnecting the AC and trying to turn the laptop on - no difference. EDIT I've also tried re-seating the RAM, to no avail. Any ideas? Thanks in advance,

  Read the article

• eTrayz: Replace base system with a bootstrapped Debian

  - by knoopx

  I bought an eTrayz NAS time ago. The device is more or less good but it ships with a closed-source custom linux and a bunch of broken web-apps. I wanted to replace the whole system with a raw Debian installation. I successfully bootstrapped a Lenny Debian into a chroot and I'm able to use use it. However I would like it to be the default system and to boot automatically at login. The device itself ships with a bundled 2.6.24.4 kernel. I think the kernel is on a dedicated flash memory so I would prefere not to re-flash it. What do you think is the best way to accomplish it?

  Read the article

• Is Lojack preinstalled on Dell's laptops?

  - by Blorgbeard

  I'm looking at buying a Dell Studio 15 or similar. Unfortunately, they all seem to come with Lojack software included and no option to take it out of the build. I really do not want this software installed on my laptop. It sounds really abusable, and hard to get rid of once installed - it hides in your BIOS and survives reinstalls, etc. Does anyone know whether Lojack comes preinstalled on this machine, or if they just ship you a disc, which could subsequently be broken in half and/or microwaved into submission?

  Read the article

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• Firefox cannot recognize certificates for well knows sites

  - by RCola

  When trying to connect to well known sites, for instance hotmail.com Firefox shows that This Connection in Untrusted. In the OptionsAdvancedCertificates it's configured to select one matching certificate automatically. Why Firefox does not trust current connection? Can it be Man-in-the-middle attack or it's something like broken certificate storage on my computer? UPDATE UPDATE2 Solved: the problem is Antivirus Web Access protection. It interferes with HTTPS connection. Similar to Man-in-the-middle? Why ESET cannot do it correctly?

  Read the article

• How to improve Varnish performance?

  - by Darkseal

  We're experiencing a strange problem with our current Varnish configuration. 4x Web Servers (IIS 6.5 on Windows 2003 Server, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) 3x Varnish Servers (varnish-3.0.3 revision 9e6a70f on Ubuntu 12.04.2 LTS - 64 bit/precise, Kernel Linux 3.2.0-29-generic, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) The Varnish Servers performance are awfully bad in general, to the point that if we shut down one of them the other two are unable to fullfill all the requests and start to skip beats resulting in pending requests, timeouts, 404, etc. What can we do to improve our Varnish performance? Considering that we're getting less than 5k request per seconds during our max peak, we should be able to serve our pages even with a single one of them without any problem. We use a standard, vanilla CFG, as shown by this varnishadm param.show output: acceptor_sleep_decay 0.900000 [] acceptor_sleep_incr 0.001000 [s] acceptor_sleep_max 0.050000 [s] auto_restart on [bool] ban_dups on [bool] ban_lurker_sleep 0.010000 [s] between_bytes_timeout 60.000000 [s] cc_command "exec gcc -std=gnu99 -g -O2 -pthread -fpic -shared - Wl,-x -o %o %s" cli_buffer 8192 [bytes] cli_timeout 20 [seconds] clock_skew 10 [s] connect_timeout 0.700000 [s] critbit_cooloff 180.000000 [s] default_grace 10.000000 [seconds] default_keep 0.000000 [seconds] default_ttl 120.000000 [seconds] diag_bitmap 0x0 [bitmap] esi_syntax 0 [bitmap] expiry_sleep 1.000000 [seconds] fetch_chunksize 128 [kilobytes] fetch_maxchunksize 262144 [kilobytes] first_byte_timeout 60.000000 [s] group varnish (113) gzip_level 6 [] gzip_memlevel 8 [] gzip_stack_buffer 32768 [Bytes] gzip_tmp_space 0 [] gzip_window 15 [] http_gzip_support off [bool] http_max_hdr 64 [header lines] http_range_support on [bool] http_req_hdr_len 8192 [bytes] http_req_size 32768 [bytes] http_resp_hdr_len 8192 [bytes] http_resp_size 32768 [bytes] idle_send_timeout 60 [seconds] listen_address :80 listen_depth 1024 [connections] log_hashstring on [bool] log_local_address off [bool] lru_interval 2 [seconds] max_esi_depth 5 [levels] max_restarts 4 [restarts] nuke_limit 50 [allocations] pcre_match_limit 10000 [] pcre_match_limit_recursion 10000 [] ping_interval 3 [seconds] pipe_timeout 60 [seconds] prefer_ipv6 off [bool] queue_max 100 [%] rush_exponent 3 [requests per request] saintmode_threshold 10 [objects] send_timeout 600 [seconds] sess_timeout 5 [seconds] sess_workspace 16384 [bytes] session_linger 50 [ms] session_max 100000 [sessions] shm_reclen 255 [bytes] shm_workspace 8192 [bytes] shortlived 10.000000 [s] syslog_cli_traffic on [bool] thread_pool_add_delay 2 [milliseconds] thread_pool_add_threshold 2 [requests] thread_pool_fail_delay 200 [milliseconds] thread_pool_max 2000 [threads] thread_pool_min 5 [threads] thread_pool_purge_delay 1000 [milliseconds] thread_pool_stack unlimited [bytes] thread_pool_timeout 300 [seconds] thread_pool_workspace 65536 [bytes] thread_pools 2 [pools] thread_stats_rate 10 [requests] user varnish (106) vcc_err_unref on [bool] vcl_dir /etc/varnish vcl_trace off [bool] vmod_dir /usr/lib/varnish/vmods waiter default (epoll, poll) This is our default.vcl file: LINK sub vcl_recv { # BASIC recv COMMANDS: # # lookup -> search the item in the cache # pass -> always serve a fresh item (no-caching) # pipe -> like pass but ensures a direct-connection with the backend (no-cache AND no-proxy) # Allow the backend to serve up stale content if it is responding slow. # This defines when Varnish should use a stale object if it has one in the cache. set req.grace = 30s; if (client.ip == "127.0.0.1") { # request from NGINX - do not alter X-Forwarded-For set req.http.HTTPS = "on"; } else { # Add an X-Forwarded-For to keep track of original request unset req.http.HTTPS; unset req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; } set req.backend = www_director; # Strip all cookies to force an anonymous request when the back-end servers are down. if (!req.backend.healthy) { unset req.http.Cookie; } ## HHTP Accept-Encoding if (req.http.Accept-Encoding) { if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { unset req.http.Accept-Encoding; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { /* non-RFC2616 or CONNECT */ return (pipe); } if (req.request != "GET" && req.request != "HEAD") { /* only deal with GET and HEAD by default */ return (pass); } if (req.http.Authorization) { return (pass); } if (req.http.HTTPS ~ "on") { return (pass); } ###################################################### # COOKIE HANDLING ###################################################### # METHOD 1: do not remove cookies, but pass the page if they contain TB_NC if (!(req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$")) { if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { return (pass); } } return (lookup); } # Code determining what to do when serving items from the IIS Server sub vcl_fetch { unset beresp.http.Server; set beresp.http.Server = "Server-1"; # Allow items to be stale if needed. This is the maximum time Varnish should keep an object. set beresp.grace = 1h; if (req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$") { unset beresp.http.set-cookie; } # Default Varnish VCL logic if (!beresp.cacheable || beresp.ttl <= 0s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has specific TB_NC no-caching cookie if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { set beresp.http.X-Cacheable = "NO:Got Cookie"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control private else if (beresp.http.Cache-Control ~ "private") { set beresp.http.X-Cacheable = "NO:Cache-Control=private"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control no-cache or Pragma no-cache else if (beresp.http.Cache-Control ~ "no-cache" || beresp.http.Pragma ~ "no-cache") { set beresp.http.X-Cacheable = "NO:Cache-Control=no-cache (or pragma no-cache)"; set beresp.ttl = 120 s; return(hit_for_pass); } # If we reach to this point, the object is cacheable. # Cacheable but with not enough ttl: we need to extend the lifetime of the object artificially # NOTE: Varnish default TTL is set in /etc/sysconfig/varnish # and can be checked using the following command: # varnishadm param.show default_ttl else if (beresp.ttl < 1s) { set beresp.ttl = 5s; set beresp.grace = 5s; set beresp.http.X-Cacheable = "YES:FORCED"; } # Cacheable and with valid TTL. else { set beresp.http.X-Cacheable = "YES"; } # DEBUG INFO (Cookies) # set beresp.http.X-Cookie-Debug = "Request cookie: " + req.http.Cookie; return(deliver); } sub vcl_error { set obj.http.Content-Type = "text/html; charset=utf-8"; if (obj.status == 404) { synthetic {" <!-- Markup for the 404 page goes here --> "}; } else if (obj.status == 500) { synthetic {" <!-- Markup for the 500 page goes here --> "}; } else if (obj.status == 503) { if (req.restarts < 4) { return(restart); } else { synthetic {" <!-- Markup for the 503 page goes here --> "}; } } else { synthetic {" <!-- Markup for a generic error page goes here --> "}; } } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } Thanks in advance,

  Read the article

• What are my X client options for MS Windows?

  - by Nick Bolton

  I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

  Read the article

• My laptop suppose to have 6 GB ram but it's only 2 GB installed

  - by monablo

  My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

  Read the article

• Keyboard not responding during boot

  - by Peri

  My keyboard just stopped responding during boot. So I cannot go to BIOS or select system which I want to start. It is USB keyboard and it was working before. I borrowed PS2 keyboard and it also isn't working during boot. Lately I have been having problems with hard disk. Once every 2-5 minutes LED was on for 30 seconds and win7 wasn't responsive. I connected disk to another controller on motherboard and seems it is working now. All that suggests that to me that that motherboard is broken. What can I check? Or maybe you have some other suggestions?

  Read the article

• debian dependencies (libssl-dev and libncurses5)

  - by RubyFreak

  I'm trying to install under RVM the Ruby Enterpise (REE) under debian My debian is squeeze (uname -r) 2.6.18-194.26.1.el5.028stab070.14xen i did try to install ree but it complains that it is missing libssl-dev and libreadline5-dev. I did update my lenny to squeeze, but i didn't update the kernel, since its a production server. The operational system is already updated and upgraded sources.list: deb http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates main I did try to install it using the following command: apt-get install libssl-dev libreadline5-dev But unfortunately i'm getting the following problems: The following packages have unmet dependencies: libreadline5-dev: Depends: libncurses5-dev but it is not going to be installed libssl-dev: Depends: libssl0.9.8 (= 0.9.8o-4squeeze1) but 0.9.8o-6 is to be installed E: Broken packages I was thinking to reinstall those packages and install again, but it has too many dependencies, and it is a production server, that i would like to know if there is any other way to fix it. Or at least to double check if it is necessary to reinstall both :-/

  Read the article

• SSH automatic logon works for one user but not the other

  - by tinmaru

  I want to enable automatic ssh login using the .ssh/config file for my git user. Here is my .ssh/config file: Host test HostName myserver.net User test IdentityFile ~/.ssh/id_rsa Host git HostName myserver.net User git IdentityFile ~/.ssh/id_rsa It works for my test user but not for my git user so my global SSH configuration is correct. The configuration are exactly the same as far as I know. It used to work with git user but I'm unable what change has broken the automatic logon. When I type: ssh -v git I get the following log: ... debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey Offering RSA public key: /Users/mylocalusername/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: _ Does anyone know what could be a possible difference

  Read the article

• Installing cURL on Ubuntu

  - by davykiash

  Am trying to install cURL on my ubuntu server using the command sudo apt-get install php5-curl However i get the following error Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-curl: Depends: phpapi-20060613+lfs Depends: php5-common (= 5.2.6.dfsg.1-3ubuntu4.5) but 5.3.2-0.dotdeb.1 is to be installed E: Broken packages I am running PHP Version 5.3.2-0.dotdeb.1 on my server. Whats the issue? I need to get curl up and running.

  Read the article

• Movie colors are off on ubuntu

  - by chris

  I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

  Read the article

• Why can't mplayer/libdvdcss/whatever play my DVDs?

  - by che

  To put it bluntly, mplayer is unable to correctly play video DVDs. It seems to correctly find the title and everything, but the picture is broken or not displayed at all, with messages like: a52: CRC check failed! a52: error at resampling [mpeg1video @ 0xa8d840]sequence header damaged [mpeg1video @ 0xa8d840]Missing picture start code Now, this all is on amd64 Gentoo Linux system. I believe the problem is not in mplayer itself, since the playback also breaks in VLC or when i copy the VOBs via vobcopy and try to play them afterwards. I use libdvdcss-1.2.10 and libdvdread-4.1.3_p1168 (current stable in Gentoo), and tried previous versions of both libs, but it didn't change a thing. The DVDs I have tried play fine in regular DVD player or on a Windows laptop. I remember the playback used to work about a year ago and I don't know what to try next. Any hints would be welcome.

  Read the article

• Is it possible to upgrade PHP to 5.3 on a Centos Kloxo installation?

  - by Malachi Soord

  I have a VPS running Centos with Kloxo on and I was wondering how I would upgrade the PHP to 5.3 - It's currently running 5.2.6. When I try and do a yum update I get the following errors: Resolving Dependencies --> Running transaction check --> Processing Dependency: libpq.so.4 for package: lxphp ---> Package postgresql-libs.i386 0:8.3.7-umask.7 set to be updated --> Finished Dependency Resolution lxphp-5.2.1-400.i386 from installed has depsolving problems --> Missing Dependency: libpq.so.4 is needed by package lxphp-5.2.1-400.i386 (installed) Error: Missing Dependency: libpq.so.4 is needed by package lxphp-5.2.1-400.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. Any help would be greatly appreciated.

  Read the article

• Windows XP Blue-Screens And Reboots Instantly On Boot-Up

  - by ashes999

  My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

  Read the article

• Laptop white screen on power-up. Still displays via HDMI output

  - by Inno

  my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

  Read the article

• Why does OVFTool hang randomly?

  - by Billy ONeal

  Hello everyone :) Some great helpers here have shown me the VMWare OVF tool for template deployment. My problem is that the tool itself stops at the "Disk Transfer Completed" step half the time I use it. This seems to be random, and when it happens I have to terminate OVFTool and start the transfer over again. The second attempt usually succeeds. Is there something I have broken on the server that might affect this? I'm using the free edition of ESXi 4.0. Billy3

  Read the article

• What's normal Taskbar behavior (windows)

  - by Erik

  I'm a fairly new user to windows, and Vista is my first version. I'm a bit confused about the taskbar -- either its behaving oddly or I'm just confused, or I've broken something. When I've got a lot of windows on screen, I thought that clicking on a window's taskbar icon would bring that window to the front. I thought it had been doing that in the past, but I'm not entirely sure. When I click it, it just flashes, a second click minimized, and a third click reopens and brings it to the front. Is this normal?

  Read the article

• Can't use HTTPS with ServerXMLHTTP object

  - by Imraan

  I am supporting a Classic ASP application that connects to a payment gateway via HTTPS. Up until recently there have been no issues. A few days ago this broke without the code, IIS config or anything local changing. Its broken on at least 3 separate servers. The last run of Windows Updates was in late November, but bringing the servers' updates up date has not resolved the problem. A code snippet is below. Dim oHttp Dim strResult Set oHttp = CreateObject("MSXML2.ServerXMLHTTP") oHttp.setOption 2, 13056 oHttp.open "POST", SOAP_ENDPOINT, false oHttp.setRequestHeader "Content-Type", "application/soap+xml; charset=utf-8" oHttp.setRequestHeader "SOAPAction", SOAP_NS + "/" & SOAP_FUNCTION oHttp.send SOAP_REQUEST Below is a dump of the error object :- Number: -2147012852 Description: A certificate is required to complete client authentication Message: A certificate is required to complete client authentication I initially posted the question on Stackoverflow (http://stackoverflow.com/questions/9212985/cant-use-https-with-serverxmlhttp-object) thinking it was a code issue, but further investigation seems to point to a server issue.

  Read the article

• I set a frequency too high for my monitor. How can I get it back to normal?

  - by ChristianM

  I have a Geforce 8500GT on my PC, and I made the stupid mistake of setting it to a higher frequency than my monitor can manage. It boots up and it shows me this… and that's all. I can't do anything. The thing is that I think this video board is a little broken anyway, because when it boots up i can't see anything until Windows starts loading. But it worked fine after, no problems. I'm on my on-board video board now, and I don't know how to set the frequency back, because when I boot up with the on-board one, it says something like "changing freq" and it goes ok. How can I get the frequency back for the 8500Gt?

  Read the article

• Why is my Windows XP not allowing me to turn on sounds?

  - by Rookie

  This started to happen few weeks ago: Every time I start up Windows, the global sound volume is set to muted. I was able to just click the muted button to un-muted and that was fine, until now: Now I cant even click that unmute button! Every time I click the unmute button, I hear a split of a second the music I play, then it stops immediately. It is maybe 10 milliseconds until it mutes it again. In theory I could write a program to click that button continuously, but is there another solution to fix this? Or is this a broken hardware problem and Windows knows it and therefore doesn't allow me to enable sounds or my computer would break apart? Any ideas what could be causing this? A weird virus that's purpose is to piss me off? That weird this whole issue is, really, doesn't make any sense at all.

  Read the article

• Proper way to connect SATA and IDE Hard drives together?

  - by Bartek

  I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

  Read the article

• Elan Smart Pad - empty settings window

  - by Quarien

  I am using my Asus UL30JT with Windows 8. I installed Elan Smart-pad driver 11.14.1.3. It basically works just fine, I have all the gestures and stuff. However, to adjust the settings I have to launch regedit.exe, because the window appears to be broken. Under Mouse - Elan Tab - Options I see this: Do you know how to fix that? Also, if you have a similar program, can you at least send me screens of what I can change? As I said, I am editing registry right now and I need some guidance what I can actually do :)

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >