push back - Page 85 - Developer IT

Rogue program disabled access to Firefox's "Get add-ons" and "Extensions". How can I get them back?

- by Eric

After installing a program called "FreeFileViewer", the program disabled access to Firefox's "Get add-ons" and "Extensions" options. To make matters worse, it installed the Yahoo! toolbar that I now can't remove (because it disabled Firefox's options to do so). Please help. Any advice you can give me to restore these Firefox options would be greatly appreciated! BTW, I am running Firefox 15.0.1 on a Windows 7 machine. Thanks, in advance, for your help! -- Eric

Read the article

/usr/bin/python (Python 2.4) was deleted on CentOS 5. I compiled from source but yum is still broken. How can I get everything back to the way it was?

- by Maxwell

I saw a lot of other questions like this but none of them answered the exact part I am having trouble with (actually installing the Python RPM). Someone on my system deleted /usr/bin/python and /usr/bin/python2.4 on my 64 bit CentOS 5.8 installation. I recompiled Python 2.4 from source, but now whenever I try to yum install anything I get the following error: [root@cerulean-OW1 ~]# yum install httpd There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4 (#1, Dec 16 2012, 09:16:56) [GCC 4.1.2 20080704 (Red Hat 4.1.2-52)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq I checked http://wiki.linux.duke.edu/YumFaq and it said the following: If you are getting a message that yum itself is the missing module then you probably installed it incorreclty (or installed the source rpm using make/make install). If possible, find a prebuilt rpm that will work for your system like one from Fedora or CentOS. Or, you can download the srpm and do a rpmbuild --rebuild yum*.src.rpm I tried going to http://rpm.pbone.net/index.php3/stat/4/idpl/17838875/dir/centos_5/com/python-2.4.3-46.el5.x86_64.rpm.html to install Python, which resulted in the following error: [root@cerulean-OW1 ~]# rpm -Uvh python-2.4.3-46.el5.x86_64.rpm error: Failed dependencies: python-libs-x86_64 = 2.4.3-46.el5 is needed by python-2.4.3-46.el5.x86_64 So I tried installing python-libs-x86_64, which resulted in the following: [root@cerulean-OW1 ~]# rpm -Uvh python-libs-2.4.3-46.el5_8.2.x86_64.rpm warning: python-libs-2.4.3-46.el5_8.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 192a7d7d Preparing... ########################################### [100%] package python-libs-2.4.3-46.el5_8.2.x86_64 is already installed file /usr/lib64/libpython2.4.so.1.0 from install of python-libs-2.4.3-46.el5_8.2.x86_64 conflicts with file from package python-libs-2.4.3-46.el5_8.2.x86_64

Read the article

Can I trick Carbonite into backing up an external hard drive?

- by Brian

I use Carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 GB), so I went out and purchased an external hard drive. However, Carbonite will not back it up. Is it possible to set up Carbonite to backup an external hard drive? I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

Read the article

Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

- by tednewk

I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

Read the article

How to setup GIT repo on server with need for working dir (non- bare)

- by OrangeTux

I want to have configurate a GIT repo for a website. Multiple users will have a clone of the repo on their local machine and on the end of each day they push their work to the server. I can setup a bare repo, but I want a working dir/non-bare repository. The idea is that the working dir of the repository will the root folder for the website. At the end of each day all changes will be visible directly. But I can't find a way to do this. Initializing the server repo with git init gives the following error when a client is trying to push some files: git push origin master [email protected]'s password: Counting objects: 3, done. Writing objects: 100% (3/3), 227 bytes, done. Total 3 (delta 0), reused 0 (delta 0) remote: error: refusing to update checked out branch: refs/heads/master remote: error: By default, updating the current branch in a non-bare repository remote: error: is denied, because it will make the index and work tree inconsistent remote: error: with what you pushed, and will require 'git reset --hard' to match remote: error: the work tree to HEAD. remote: error: remote: error: You can set 'receive.denyCurrentBranch' configuration variable to remote: error: 'ignore' or 'warn' in the remote repository to allow pushing into remote: error: its current branch; however, this is not recommended unless you remote: error: arranged to update its work tree to match what you pushed in some remote: error: other way. remote: error: remote: error: To squelch this message and still keep the default behaviour, set remote: error: 'receive.denyCurrentBranch' configuration variable to 'refuse'. To ssh://[email protected]/home/orangetux/www/ ! [remote rejected] master -> master (branch is currently checked out) error: failed to push some refs to 'ssh://[email protected]/home/orangetux/www/' So I'm wondering if this the right way to setup a GIT repo for a website? If so, how do I have to do this? If not, what is a better way to setup a GIT repo for the development of a website? EDIT you can't push to a non-bare repository Oke, clear. But whats the way to solve my problem? Create a bare repository on the server and have a clone of this repo on the same server in the htdocs folder? This looks a bit clumsy to me. To see the result of a commit I've to clone the repository each time.

Read the article

how can I give openvpn clients access to a dns server (bind9) that is located on the same machine as the openvpn server

- by lacrosse1991

I currently have a debian server that is running an openvpn server. I also have a dns server (bind9) that I would like give allow access to by the connected openvpn clients, but I am unsure as of how to do this, I already known how to send dns options to the clients using push "dhcp-option DNS x.x.x.x" but I am just unsure how give the clients access to the dns server that is located on the same machine as the vpn server, so if anyone could point me in the right direction I would really appreciate it. Also in case this would have anything to do with adding rules to iptables, this is my current configuration for iptables # Generated by iptables-save v1.4.14 on Thu Oct 18 22:05:33 2012 *nat :PREROUTING ACCEPT [3831842:462225238] :INPUT ACCEPT [3820049:461550908] :OUTPUT ACCEPT [1885011:139487044] :POSTROUTING ACCEPT [1883834:139415168] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 18 22:05:33 2012 # Generated by iptables-save v1.4.14 on Thu Oct 18 22:05:33 2012 *filter :INPUT ACCEPT [45799:10669929] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [45747:10335026] :fail2ban-apache - [0:0] :fail2ban-apache-myadmin - [0:0] :fail2ban-apache-noscript - [0:0] :fail2ban-ssh - [0:0] :fail2ban-ssh-ddos - [0:0] :fail2ban-webserver-w00tw00t - [0:0] -A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache-myadmin -A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-webserver-w00tw00t -A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache-noscript -A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh-ddos -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -i tun+ -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT -A FORWARD -i tun+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A fail2ban-apache -j RETURN -A fail2ban-apache-myadmin -s 211.154.213.122/32 -j DROP -A fail2ban-apache-myadmin -s 201.170.229.96/32 -j DROP -A fail2ban-apache-myadmin -j RETURN -A fail2ban-apache-noscript -j RETURN -A fail2ban-ssh -s 76.9.59.66/32 -j DROP -A fail2ban-ssh -s 64.13.220.73/32 -j DROP -A fail2ban-ssh -s 203.69.139.179/32 -j DROP -A fail2ban-ssh -s 173.10.11.146/32 -j DROP -A fail2ban-ssh -j RETURN -A fail2ban-ssh-ddos -j RETURN -A fail2ban-webserver-w00tw00t -s 217.70.51.154/32 -j DROP -A fail2ban-webserver-w00tw00t -s 86.35.242.58/32 -j DROP -A fail2ban-webserver-w00tw00t -j RETURN COMMIT # Completed on Thu Oct 18 22:05:33 2012 also here is my openvpn server configuration port 1194 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo user nobody group users persist-key persist-tun status /var/log/openvpn/openvpn-status.log verb 3 push "redirect-gateway def1" push "dhcp-option DNS 213.133.98.98" push "dhcp-option DNS 213.133.99.99" push "dhcp-option DNS 213.133.100.100" client-to-client

Read the article

how to hide backbar button in navigationbar in iPhone sdk

- by Prerak

Hi, In my iPhone App there are three views [ firstView secondView and thirdView} now I want to put Back Button in navigation bar in thirdview only which should take me to back secondview only for that i m writting this code in first view self.navigationItem.hidesBackButton:NO; and it shows the back button in both the views secondView and thirdView what I should do to hide back button in the the second view? please Help and Suggest. thanks.

Read the article

Syncing Data with a Server using Silverlight and HTTP Polling Duplex

- by dwahlin

Many applications have the need to stay in-sync with data provided by a service. Although web applications typically rely on standard polling techniques to check if data has changed, Silverlight provides several interesting options for keeping an application in-sync that rely on server “push” technologies. A few years back I wrote several blog posts covering different “push” technologies available in Silverlight that rely on sockets or HTTP Polling Duplex. We recently had a project that looked like it could benefit from pushing data from a server to one or more clients so I thought I’d revisit the subject and provide some updates to the original code posted. If you’ve worked with AJAX before in Web applications then you know that until browsers fully support web sockets or other duplex (bi-directional communication) technologies that it’s difficult to keep applications in-sync with a server without relying on polling. The problem with polling is that you have to check for changes on the server on a timed-basis which can often be wasteful and take up unnecessary resources. With server “push” technologies, data can be pushed from the server to the client as it changes. Once the data is received, the client can update the user interface as appropriate. Using “push” technologies allows the client to listen for changes from the data but stay 100% focused on client activities as opposed to worrying about polling and asking the server if anything has changed. Silverlight provides several options for pushing data from a server to a client including sockets, TCP bindings and HTTP Polling Duplex. Each has its own strengths and weaknesses as far as performance and setup work with HTTP Polling Duplex arguably being the easiest to setup and get going. In this article I’ll demonstrate how HTTP Polling Duplex can be used in Silverlight 4 applications to push data and show how you can create a WCF server that provides an HTTP Polling Duplex binding that a Silverlight client can consume. What is HTTP Polling Duplex? Technologies that allow data to be pushed from a server to a client rely on duplex functionality. Duplex (or bi-directional) communication allows data to be passed in both directions. A client can call a service and the server can call the client. HTTP Polling Duplex (as its name implies) allows a server to communicate with a client without forcing the client to constantly poll the server. It has the benefit of being able to run on port 80 making setup a breeze compared to the other options which require specific ports to be used and cross-domain policy files to be exposed on port 943 (as with sockets and TCP bindings). Having said that, if you’re looking for the best speed possible then sockets and TCP bindings are the way to go. But, they’re not the only game in town when it comes to duplex communication. The first time I heard about HTTP Polling Duplex (initially available in Silverlight 2) I wasn’t exactly sure how it was any better than standard polling used in AJAX applications. I read the Silverlight SDK, looked at various resources and generally found the following definition unhelpful as far as understanding the actual benefits that HTTP Polling Duplex provided: "The Silverlight client periodically polls the service on the network layer, and checks for any new messages that the service wants to send on the callback channel. The service queues all messages sent on the client callback channel and delivers them to the client when the client polls the service." Although the previous definition explained the overall process, it sounded as if standard polling was used. Fortunately, Microsoft’s Scott Guthrie provided me with a more clear definition several years back that explains the benefits provided by HTTP Polling Duplex quite well (used with his permission): "The [HTTP Polling Duplex] duplex support does use polling in the background to implement notifications – although the way it does it is different than manual polling. It initiates a network request, and then the request is effectively “put to sleep” waiting for the server to respond (it doesn’t come back immediately). The server then keeps the connection open but not active until it has something to send back (or the connection times out after 90 seconds – at which point the duplex client will connect again and wait). This way you are avoiding hitting the server repeatedly – but still get an immediate response when there is data to send." After hearing Scott’s definition the light bulb went on and it all made sense. A client makes a request to a server to check for changes, but instead of the request returning immediately, it parks itself on the server and waits for data. It’s kind of like waiting to pick up a pizza at the store. Instead of calling the store over and over to check the status, you sit in the store and wait until the pizza (the request data) is ready. Once it’s ready you take it back home (to the client). This technique provides a lot of efficiency gains over standard polling techniques even though it does use some polling of its own as a request is initially made from a client to a server. So how do you implement HTTP Polling Duplex in your Silverlight applications? Let’s take a look at the process by starting with the server. Creating an HTTP Polling Duplex WCF Service Creating a WCF service that exposes an HTTP Polling Duplex binding is straightforward as far as coding goes. Add some one way operations into an interface, create a client callback interface and you’re ready to go. The most challenging part comes into play when configuring the service to properly support the necessary binding and that’s more of a cut and paste operation once you know the configuration code to use. To create an HTTP Polling Duplex service you’ll need to expose server-side and client-side interfaces and reference the System.ServiceModel.PollingDuplex assembly (located at C:\Program Files (x86)\Microsoft SDKs\Silverlight\v4.0\Libraries\Server on my machine) in the server project. For the demo application I upgraded a basketball simulation service to support the latest polling duplex assemblies. The service simulates a simple basketball game using a Game class and pushes information about the game such as score, fouls, shots and more to the client as the game changes over time. Before jumping too far into the game push service, it’s important to discuss two interfaces used by the service to communicate in a bi-directional manner. The first is called IGameStreamService and defines the methods/operations that the client can call on the server (see Listing 1). The second is IGameStreamClient which defines the callback methods that a server can use to communicate with a client (see Listing 2). [ServiceContract(Namespace = "Silverlight", CallbackContract = typeof(IGameStreamClient))] public interface IGameStreamService { [OperationContract(IsOneWay = true)] void GetTeamData(); } Listing 1. The IGameStreamService interface defines server operations that can be called on the server. [ServiceContract] public interface IGameStreamClient { [OperationContract(IsOneWay = true)] void ReceiveTeamData(List<Team> teamData); [OperationContract(IsOneWay = true, AsyncPattern=true)] IAsyncResult BeginReceiveGameData(GameData gameData, AsyncCallback callback, object state); void EndReceiveGameData(IAsyncResult result); } Listing 2. The IGameStreamClient interfaces defines client operations that a server can call. The IGameStreamService interface is decorated with the standard ServiceContract attribute but also contains a value for the CallbackContract property. This property is used to define the interface that the client will expose (IGameStreamClient in this example) and use to receive data pushed from the service. Notice that each OperationContract attribute in both interfaces sets the IsOneWay property to true. This means that the operation can be called and passed data as appropriate, however, no data will be passed back. Instead, data will be pushed back to the client as it’s available. Looking through the IGameStreamService interface you can see that the client can request team data whereas the IGameStreamClient interface allows team and game data to be received by the client. One interesting point about the IGameStreamClient interface is the inclusion of the AsyncPattern property on the BeginReceiveGameData operation. I initially created this operation as a standard one way operation and it worked most of the time. However, as I disconnected clients and reconnected new ones game data wasn’t being passed properly. After researching the problem more I realized that because the service could take up to 7 seconds to return game data, things were getting hung up. By setting the AsyncPattern property to true on the BeginReceivedGameData operation and providing a corresponding EndReceiveGameData operation I was able to get around this problem and get everything running properly. I’ll provide more details on the implementation of these two methods later in this post. Once the interfaces were created I moved on to the game service class. The first order of business was to create a class that implemented the IGameStreamService interface. Since the service can be used by multiple clients wanting game data I added the ServiceBehavior attribute to the class definition so that I could set its InstanceContextMode to InstanceContextMode.Single (in effect creating a Singleton service object). Listing 3 shows the game service class as well as its fields and constructor. [ServiceBehavior(ConcurrencyMode = ConcurrencyMode.Multiple, InstanceContextMode = InstanceContextMode.Single)] public class GameStreamService : IGameStreamService { object _Key = new object(); Game _Game = null; Timer _Timer = null; Random _Random = null; Dictionary<string, IGameStreamClient> _ClientCallbacks = new Dictionary<string, IGameStreamClient>(); static AsyncCallback _ReceiveGameDataCompleted = new AsyncCallback(ReceiveGameDataCompleted); public GameStreamService() { _Game = new Game(); _Timer = new Timer { Enabled = false, Interval = 2000, AutoReset = true }; _Timer.Elapsed += new ElapsedEventHandler(_Timer_Elapsed); _Timer.Start(); _Random = new Random(); }} Listing 3. The GameStreamService implements the IGameStreamService interface which defines a callback contract that allows the service class to push data back to the client. By implementing the IGameStreamService interface, GameStreamService must supply a GetTeamData() method which is responsible for supplying information about the teams that are playing as well as individual players. GetTeamData() also acts as a client subscription method that tracks clients wanting to receive game data. Listing 4 shows the GetTeamData() method. public void GetTeamData() { //Get client callback channel var context = OperationContext.Current; var sessionID = context.SessionId; var currClient = context.GetCallbackChannel<IGameStreamClient>(); context.Channel.Faulted += Disconnect; context.Channel.Closed += Disconnect; IGameStreamClient client; if (!_ClientCallbacks.TryGetValue(sessionID, out client)) { lock (_Key) { _ClientCallbacks[sessionID] = currClient; } } currClient.ReceiveTeamData(_Game.GetTeamData()); //Start timer which when fired sends updated score information to client if (!_Timer.Enabled) { _Timer.Enabled = true; } } Listing 4. The GetTeamData() method subscribes a given client to the game service and returns. The key the line of code in the GetTeamData() method is the call to GetCallbackChannel<IGameStreamClient>(). This method is responsible for accessing the calling client’s callback channel. The callback channel is defined by the IGameStreamClient interface shown earlier in Listing 2 and used by the server to communicate with the client. Before passing team data back to the client, GetTeamData() grabs the client’s session ID and checks if it already exists in the _ClientCallbacks dictionary object used to track clients wanting callbacks from the server. If the client doesn’t exist it adds it into the collection. It then pushes team data from the Game class back to the client by calling ReceiveTeamData(). Since the service simulates a basketball game, a timer is then started if it’s not already enabled which is then used to randomly send data to the client. When the timer fires, game data is pushed down to the client. Listing 5 shows the _Timer_Elapsed() method that is called when the timer fires as well as the SendGameData() method used to send data to the client. void _Timer_Elapsed(object sender, ElapsedEventArgs e) { int interval = _Random.Next(3000, 7000); lock (_Key) { _Timer.Interval = interval; _Timer.Enabled = false; } SendGameData(_Game.GetGameData()); } private void SendGameData(GameData gameData) { var cbs = _ClientCallbacks.Where(cb => ((IContextChannel)cb.Value).State == CommunicationState.Opened); for (int i = 0; i < cbs.Count(); i++) { var cb = cbs.ElementAt(i).Value; try { cb.BeginReceiveGameData(gameData, _ReceiveGameDataCompleted, cb); } catch (TimeoutException texp) { //Log timeout error } catch (CommunicationException cexp) { //Log communication error } } lock (_Key) _Timer.Enabled = true; } private static void ReceiveGameDataCompleted(IAsyncResult result) { try { ((IGameStreamClient)(result.AsyncState)).EndReceiveGameData(result); } catch (CommunicationException) { // empty } catch (TimeoutException) { // empty } } LIsting 5. _Timer_Elapsed is used to simulate time in a basketball game. When _Timer_Elapsed() fires the SendGameData() method is called which iterates through the clients wanting to be notified of changes. As each client is identified, their respective BeginReceiveGameData() method is called which ultimately pushes game data down to the client. Recall that this method was defined in the client callback interface named IGameStreamClient shown earlier in Listing 2. Notice that BeginReceiveGameData() accepts _ReceiveGameDataCompleted as its second parameter (an AsyncCallback delegate defined in the service class) and passes the client callback as the third parameter. The initial version of the sample application had a standard ReceiveGameData() method in the client callback interface. However, sometimes the client callbacks would work properly and sometimes they wouldn’t which was a little baffling at first glance. After some investigation I realized that I needed to implement an asynchronous pattern for client callbacks to work properly since 3 – 7 second delays are occurring as a result of the timer. Once I added the BeginReceiveGameData() and ReceiveGameDataCompleted() methods everything worked properly since each call was handled in an asynchronous manner. The final task that had to be completed to get the server working properly with HTTP Polling Duplex was adding configuration code into web.config. In the interest of brevity I won’t post all of the code here since the sample application includes everything you need. However, Listing 6 shows the key configuration code to handle creating a custom binding named pollingDuplexBinding and associate it with the service’s endpoint. <bindings> <customBinding> <binding name="pollingDuplexBinding"> <binaryMessageEncoding /> <pollingDuplex maxPendingSessions="2147483647" maxPendingMessagesPerSession="2147483647" inactivityTimeout="02:00:00" serverPollTimeout="00:05:00"/> <httpTransport /> </binding> </customBinding> </bindings> <services> <service name="GameService.GameStreamService" behaviorConfiguration="GameStreamServiceBehavior"> <endpoint address="" binding="customBinding" bindingConfiguration="pollingDuplexBinding" contract="GameService.IGameStreamService"/> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> Listing 6. Configuring an HTTP Polling Duplex binding in web.config and associating an endpoint with it. Calling the Service and Receiving “Pushed” Data Calling the service and handling data that is pushed from the server is a simple and straightforward process in Silverlight. Since the service is configured with a MEX endpoint and exposes a WSDL file, you can right-click on the Silverlight project and select the standard Add Service Reference item. After the web service proxy is created you may notice that the ServiceReferences.ClientConfig file only contains an empty configuration element instead of the normal configuration elements created when creating a standard WCF proxy. You can certainly update the file if you want to read from it at runtime but for the sample application I fed the service URI directly to the service proxy as shown next: var address = new EndpointAddress("http://localhost.:5661/GameStreamService.svc"); var binding = new PollingDuplexHttpBinding(); _Proxy = new GameStreamServiceClient(binding, address); _Proxy.ReceiveTeamDataReceived += _Proxy_ReceiveTeamDataReceived; _Proxy.ReceiveGameDataReceived += _Proxy_ReceiveGameDataReceived; _Proxy.GetTeamDataAsync(); This code creates the proxy and passes the endpoint address and binding to use to its constructor. It then wires the different receive events to callback methods and calls GetTeamDataAsync(). Calling GetTeamDataAsync() causes the server to store the client in the server-side dictionary collection mentioned earlier so that it can receive data that is pushed. As the server-side timer fires and game data is pushed to the client, the user interface is updated as shown in Listing 7. Listing 8 shows the _Proxy_ReceiveGameDataReceived() method responsible for handling the data and calling UpdateGameData() to process it. Listing 7. The Silverlight interface. Game data is pushed from the server to the client using HTTP Polling Duplex. void _Proxy_ReceiveGameDataReceived(object sender, ReceiveGameDataReceivedEventArgs e) { UpdateGameData(e.gameData); } private void UpdateGameData(GameData gameData) { //Update Score this.tbTeam1Score.Text = gameData.Team1Score.ToString(); this.tbTeam2Score.Text = gameData.Team2Score.ToString(); //Update ball visibility if (gameData.Action != ActionsEnum.Foul) { if (tbTeam1.Text == gameData.TeamOnOffense) { AnimateBall(this.BB1, this.BB2); } else //Team 2 { AnimateBall(this.BB2, this.BB1); } } if (this.lbActions.Items.Count > 9) this.lbActions.Items.Clear(); this.lbActions.Items.Add(gameData.LastAction); if (this.lbActions.Visibility == Visibility.Collapsed) this.lbActions.Visibility = Visibility.Visible; } private void AnimateBall(Image onBall, Image offBall) { this.FadeIn.Stop(); Storyboard.SetTarget(this.FadeInAnimation, onBall); Storyboard.SetTarget(this.FadeOutAnimation, offBall); this.FadeIn.Begin(); } Listing 8. As the server pushes game data, the client’s _Proxy_ReceiveGameDataReceived() method is called to process the data. In a real-life application I’d go with a ViewModel class to handle retrieving team data, setup data bindings and handle data that is pushed from the server. However, for the sample application I wanted to focus on HTTP Polling Duplex and keep things as simple as possible. Summary Silverlight supports three options when duplex communication is required in an application including TCP bindins, sockets and HTTP Polling Duplex. In this post you’ve seen how HTTP Polling Duplex interfaces can be created and implemented on the server as well as how they can be consumed by a Silverlight client. HTTP Polling Duplex provides a nice way to “push” data from a server while still allowing the data to flow over port 80 or another port of your choice. Sample Application Download

Read the article

Silverlight Cream for January 14, 2011 -- #1027

- by Dave Campbell

In this Issue: Sigurd Snørteland, Yochay Kiriaty, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), Kunal Chowdhury, Martin Krüger(-2-), Jonathan Cardy. Above the Fold: Silverlight: "Image Viewer using a GridSplitter control" Martin Krüger WP7: "Implementing WP7 ToggleImageControl from the ground up: Part1" WindowsPhoneGeek VS2010 Templates: "MVVM Project Templates for Visual Studio 2010" Jonathan Cardy From SilverlightCream.com: BabySmash7 - a WP7 children's game (source code included) Sigurd Snørteland not only brings Scott Hanselman's Baby Smash to WP7, but he's delivering the source to us as well as discussion of the app. Windows Push Notification Server Side Helper Library Yochay Kiriaty has a tutorial up on Push Notification... not explaining them, but a discussion of a WP7 Push Recipe that provides an easy way for sending all 3 kinds of push notification messages currently supported. Implementing WP7 ToggleImageControl from the ground up: Part1 WindowsPhoneGeek has a great 2-part series up on building a useful WP7 custom control -- a ToggleImage control... this part 1 is definition, deciding on Visual states, etc... buckle up... this is good stuff Implementing WP7 ToggleImageControl from the ground up: Part2 Part 2 in WindowsPhoneGeek's series is also up and where the real fun lives -- implementing the behavior of the control... and the source is available at the end of this post. The Full Stack #5 – Entity Framework Code First Jesse Liberty has episode 5 of the "Full Stack" series he and Jon Galloway are doing and are discussing Entity Framework Code First. Windows Phone From Scratch #18 – MVVM Light Toolkit Soup To Nuts 3 Jesse Liberty also has part 3 of his MVVMLight and WP7 post up and is digging into messaging in this one... for example view <--> ViewModel communication. Exploring Ribbon Control for Silverlight (Part - 1) Kunal Chowdhury has part 1 of a series up on using the Silverlight Ribbon Control from DevComponents... lots of information and a great intro to a great control. Image Viewer using a GridSplitter control Martin Krüger has a very nice picture viewer up as a demo and code available that simply uses the GridSplitter to implement tha aperture... check it out. How to: Gentle animation of a magnify effect Martin Krüger's latest is a take-off on a prior post he links to called 'just for fun' in which he smoothly animates a magnify effect... just very cool animation... explanation and source. MVVM Project Templates for Visual Studio 2010 Jonathan Cardy has a couple resources you probably wanna grab... two MVVM project templates for VS2010... one WPF and one Silverlight Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

How do you exclude yourself from Google Analytics on your website using cookies?

- by Keoki Zee

I'm trying to set up an exclusion filter with a browser cookie, so that my own visits to my don't show up in my Google Analytics. I tried 3 different methods and none of them have worked so far. I would like help understanding what I am doing wrong and how I can fix this. Method 1 First, I tried following Google's instructions, http://www.google.com/support/analytics/bin/answer.py?hl=en&answer=55481, for excluding traffic by Cookie Content: Create a new page on your domain, containing the following code: <body onLoad="javascript:pageTracker._setVar('test_value');"> Method 2 Next, when that didn't work, I googled around and found this Google thread, http://www.google.com/support/forum/p/Google%20Analytics/thread?tid=4741f1499823fcd5&hl=en, where the most popular answer says to use a slightly different code: SHS Analytics wrote: <body onLoad="javascript:_gaq.push(['_setVar','test_value']);"> Thank you! This has now set a __utmv cookie containing "test_value", whereas the original: pageTracker._setVar('test_value') (which Google is still recommending) did not manage to do that for me (in Mac Safari 5 and Firefox 3.6.8). So I tried this code, but it didn't work for me. Method 3 Finally, I searched StackOverflow and came across this thread, http://stackoverflow.com/questions/3495270/exclude-my-traffic-from-google-analytics-using-cookie-with-subdomain, which suggests that the following code might work: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setVar', 'exclude_me']); _gaq.push(['_setAccount', 'UA-xxxxxxxx-x']); _gaq.push(['_trackPageview']); // etc... </script> This script appeared in the head element in the example, instead of in the onload event of the body like in the previous 2 examples. So I tried this too, but still had no luck with trying to exclude myself from Google Analytics. Re-iterate question So, I tried all 3 methods above with no success. Am I doing something wrong? How can I exclude myself from my Google Analytics using an exclusion cookie for my browser?

Read the article

How do you exclude yourself from Google Analytics on your website using cookies?

- by Cold Hawaiian

I'm trying to set up an exclusion filter with a browser cookie, so that my own visits to my don't show up in my Google Analytics. I tried 3 different methods and none of them have worked so far. I would like help understanding what I am doing wrong and how I can fix this. Method 1 First, I tried following Google's instructions, http://www.google.com/support/analytics/bin/answer.py?hl=en&answer=55481, for excluding traffic by Cookie Content: Create a new page on your domain, containing the following code: <body onLoad="javascript:pageTracker._setVar('test_value');"> Method 2 Next, when that didn't work, I googled around and found this Google thread, http://www.google.com/support/forum/p/Google%20Analytics/thread?tid=4741f1499823fcd5&hl=en, where the most popular answer says to use a slightly different code: SHS Analytics wrote: <body onLoad="javascript:_gaq.push(['_setVar','test_value']);"> Thank you! This has now set a __utmv cookie containing "test_value", whereas the original: pageTracker._setVar('test_value') (which Google is still recommending) did not manage to do that for me (in Mac Safari 5 and Firefox 3.6.8). So I tried this code, but it didn't work for me. Method 3 Finally, I searched StackOverflow and came across this thread, http://stackoverflow.com/questions/3495270/exclude-my-traffic-from-google-analytics-using-cookie-with-subdomain, which suggests that the following code might work: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setVar', 'exclude_me']); _gaq.push(['_setAccount', 'UA-xxxxxxxx-x']); _gaq.push(['_trackPageview']); // etc... </script> This script appeared in the head element in the example, instead of in the onload event of the body like in the previous 2 examples. So I tried this too, but still had no luck with trying to exclude myself from Google Analytics. Re-iterate question So, I tried all 3 methods above with no success. Am I doing something wrong? How can I exclude myself from my Google Analytics using an exclusion cookie for my browser? Update I've been testing this for several days now, and I've confirmed that the 2nd method of excluding yourself from tracking does indeed work. The problem was that the filter settings weren't properly applied to my profile, which has been corrected. See the accepted answer below.

Read the article

How to filter a funnel by product?

- by Ryan

Let's say I'm tracking a conversion like the following: View product > Customize > Finish order When I push the the above events, I also push a product ID and name attached to it, hoping that I could segment by that, but I can't figure out how. I want to view the conversion per product, not generally. Does anyone know if this is possible with Google Analytics? If not, please suggest other solutions.

Read the article

how httpregistryfilter() in blackberry works?how to use [closed]

- by Sowjanya

i am trying to start my application using an url in my device browser. for this i used this: HttpFilterRegistry.registerFilter("www.atsas23.com","com.rim.samples.device.push"); Here this method will registry my application with www.atsas23.com and the second one will call the protocol class ,which is their in com.rim.samples.device.push. Now after doing ,still i am not getting .Means my app is not opening in browser.Can anybody tell why my application is not registering.what is going wrong.

Read the article

Can't install graphic drivers in 12.04

- by yinon

The driver is ATI/AMD proprietary FGLRX graphics driver. After clicking Activate, it asks for my password and starts downloading. Then it shows an error message: 2012-10-03 16:16:04,227 DEBUG: updating <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> 2012-10-03 16:16:06,172 DEBUG: reading modalias file /lib/modules/3.2.0-29-generic-pae/modules.alias 2012-10-03 16:16:06,383 DEBUG: reading modalias file /usr/share/jockey/modaliases/b43 2012-10-03 16:16:06,386 DEBUG: reading modalias file /usr/share/jockey/modaliases/disable-upstream-nvidia 2012-10-03 16:16:06,456 DEBUG: loading custom handler /usr/share/jockey/handlers/pvr-omap4.py 2012-10-03 16:16:06,506 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-10-03 16:16:06,509 DEBUG: Instantiated Handler subclass __builtin__.PVROmap4Driver from name PVROmap4Driver 2012-10-03 16:16:06,682 DEBUG: PowerVR SGX proprietary graphics driver for OMAP 4 not available 2012-10-03 16:16:06,682 DEBUG: loading custom handler /usr/share/jockey/handlers/cdv.py 2012-10-03 16:16:06,727 WARNING: modinfo for module cedarview_gfx failed: ERROR: modinfo: could not find module cedarview_gfx 2012-10-03 16:16:06,728 DEBUG: Instantiated Handler subclass __builtin__.CdvDriver from name CdvDriver 2012-10-03 16:16:06,728 DEBUG: cdv.available: falling back to default 2012-10-03 16:16:06,772 DEBUG: Intel Cedarview graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,772 DEBUG: loading custom handler /usr/share/jockey/handlers/vmware-client.py 2012-10-03 16:16:06,781 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-10-03 16:16:06,781 DEBUG: Instantiated Handler subclass __builtin__.VmwareClientHandler from name VmwareClientHandler 2012-10-03 16:16:06,795 DEBUG: VMWare Client Tools availability undetermined, adding to pool 2012-10-03 16:16:06,796 DEBUG: loading custom handler /usr/share/jockey/handlers/fglrx.py 2012-10-03 16:16:06,801 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:06,805 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriverUpdate from name FglrxDriverUpdate 2012-10-03 16:16:06,805 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,833 DEBUG: ATI/AMD proprietary FGLRX graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:06,836 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:06,840 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriver from name FglrxDriver 2012-10-03 16:16:06,840 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,873 DEBUG: ATI/AMD proprietary FGLRX graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,873 DEBUG: loading custom handler /usr/share/jockey/handlers/dvb_usb_firmware.py 2012-10-03 16:16:06,925 DEBUG: Instantiated Handler subclass __builtin__.DvbUsbFirmwareHandler from name DvbUsbFirmwareHandler 2012-10-03 16:16:06,926 DEBUG: Firmware for DVB cards not available 2012-10-03 16:16:06,926 DEBUG: loading custom handler /usr/share/jockey/handlers/nvidia.py 2012-10-03 16:16:06,961 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-10-03 16:16:06,967 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96 from name NvidiaDriver96 2012-10-03 16:16:06,968 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:06,980 DEBUG: XorgDriverHandler(nvidia_96, nvidia-96, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:06,980 DEBUG: NVIDIA accelerated graphics driver not available 2012-10-03 16:16:06,983 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-10-03 16:16:06,987 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrent from name NvidiaDriverCurrent 2012-10-03 16:16:06,987 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,015 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,018 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-10-03 16:16:07,021 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrentUpdates from name NvidiaDriverCurrentUpdates 2012-10-03 16:16:07,022 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,066 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,069 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-10-03 16:16:07,072 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173Updates from name NvidiaDriver173Updates 2012-10-03 16:16:07,073 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,105 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,112 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-10-03 16:16:07,118 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173 from name NvidiaDriver173 2012-10-03 16:16:07,119 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,159 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,166 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-10-03 16:16:07,171 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96Updates from name NvidiaDriver96Updates 2012-10-03 16:16:07,171 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,188 DEBUG: XorgDriverHandler(nvidia_96_updates, nvidia-96-updates, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:07,188 DEBUG: NVIDIA accelerated graphics driver (post-release updates) not available 2012-10-03 16:16:07,188 DEBUG: loading custom handler /usr/share/jockey/handlers/madwifi.py 2012-10-03 16:16:07,195 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-10-03 16:16:07,195 DEBUG: Instantiated Handler subclass __builtin__.MadwifiHandler from name MadwifiHandler 2012-10-03 16:16:07,196 DEBUG: Alternate Atheros "madwifi" driver availability undetermined, adding to pool 2012-10-03 16:16:07,196 DEBUG: loading custom handler /usr/share/jockey/handlers/sl_modem.py 2012-10-03 16:16:07,213 DEBUG: Instantiated Handler subclass __builtin__.SlModem from name SlModem 2012-10-03 16:16:07,234 DEBUG: Software modem not available 2012-10-03 16:16:07,234 DEBUG: loading custom handler /usr/share/jockey/handlers/broadcom_wl.py 2012-10-03 16:16:07,239 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-10-03 16:16:07,277 DEBUG: Instantiated Handler subclass __builtin__.BroadcomWLHandler from name BroadcomWLHandler 2012-10-03 16:16:07,277 DEBUG: Broadcom STA wireless driver availability undetermined, adding to pool 2012-10-03 16:16:07,278 DEBUG: all custom handlers loaded 2012-10-03 16:16:07,278 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027D8sv00001043sd000082EAbc04sc03i00') 2012-10-03 16:16:07,568 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0000v0000p0000e0000-e0,5,kramlsfw6,') 2012-10-03 16:16:07,704 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,704 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,704 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00') 2012-10-03 16:16:07,707 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801'} 2012-10-03 16:16:07,707 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C01:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0B00:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001969d00001026sv00001043sd00008304bc02sc00i00') 2012-10-03 16:16:07,710 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'atl1e'} 2012-10-03 16:16:07,710 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'atl1e', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,710 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0003v04F2p0816e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:pcspkr') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp'} 2012-10-03 16:16:07,712 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v1D6Bp0001d0302dc09dsc00dp00ic09isc00ip00') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0019v0000p0001e0000-e0,1,k74,ramlsfw') 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C04:') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:eisa') 2012-10-03 16:16:07,725 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:Fixed MDIO bus') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000029C0sv00001043sd000082B0bc06sc00i00') 2012-10-03 16:16:07,731 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v045Ep0766d0101dcEFdsc02dp01ic01isc01ip00') 2012-10-03 16:16:07,777 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio'} 2012-10-03 16:16:07,777 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0F03:PNP0F13:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0000:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001002d000095C5sv0000174Bsd0000E400bc03sc00i00') 2012-10-03 16:16:08,072 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx_updates', 'package': 'fglrx-updates'} 2012-10-03 16:16:08,133 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,134 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,072 DEBUG: found match in handler pool xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,136 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:08,147 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,173 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,173 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,162 DEBUG: got handler xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,173 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx', 'package': 'fglrx'} 2012-10-03 16:16:08,184 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,184 DEBUG: fglrx is not the alternative in use 2012-10-03 16:16:08,173 DEBUG: found match in handler pool xorg:fglrx([FglrxDriver, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver) 2012-10-03 16:16:08,187 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:08,190 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,216 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None . . . 2012-10-03 16:18:10,552 DEBUG: install progress initramfs-tools 62.500000 2012-10-03 16:18:22,249 DEBUG: install progress libc-bin 62.500000 2012-10-03 16:18:23,251 DEBUG: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,256 ERROR: Package failed to install: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,590 WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver 2012-10-03 16:18:43,601 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,601 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:43,617 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,617 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,143 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,144 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,154 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,154 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,182 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,182 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:54,215 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,215 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,229 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,229 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,268 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,268 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,279 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,279 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,298 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,298 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:57,828 DEBUG: Shutting down I don't know how to troubleshoot from looking at the log file, could somebody assist me with this please? You can download the log file at: https://www.dropbox.com/s/a59d2hyabo02q5z/jockey.log

Read the article

ASP.NET. MVC2. Entity Framework. Cannot pass primary key value back from view to [HttpPost]

- by Paul Connolly

I pass a ViewModel (which contains a "Person" object) from the "EditPerson" controller action into the view. When posted back from the view, the ActionResult receives all of the Person properties except the ID (which it says is zero instead of say its real integer) Can anyone tell me why? The controllers look like this: public ActionResult EditPerson(int personID) { var personToEdit = repository.GetPerson(personID); FormationViewModel vm = new FormationViewModel(); vm.Person = personToEdit; return View(vm); } [HttpPost] public ActionResult EditPerson(FormationViewModel model) <<Passes in all properties except ID { // Persistence code } The View looks like this: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<Afp.Models.Formation.FormationViewModel>" %> <% using (Html.BeginForm()) {% <%= Html.ValidationSummary(true) % <fieldset> <legend>Fields</legend> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.Title) %> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.Title) %> <%= Html.ValidationMessageFor(model => model.Person.Title) %> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.Forename)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.Forename)%> <%= Html.ValidationMessageFor(model => model.Person.Forename)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.Surname)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.Surname)%> <%= Html.ValidationMessageFor(model => model.Person.Surname)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.DOB) %> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.DOB, String.Format("{0:g}", Model.DOB)) <%= Html.ValidationMessageFor(model => model.DOB) %> </div>--%> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.Nationality)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.Nationality)%> <%= Html.ValidationMessageFor(model => model.Person.Nationality)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.Occupation)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.Occupation)%> <%= Html.ValidationMessageFor(model => model.Person.Occupation)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.CountryOfResidence)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.CountryOfResidence)%> <%= Html.ValidationMessageFor(model => model.Person.CountryOfResidence)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.PreviousNameForename)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.PreviousNameForename)%> <%= Html.ValidationMessageFor(model => model.Person.PreviousNameForename)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.PreviousSurname)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.PreviousSurname)%> <%= Html.ValidationMessageFor(model => model.Person.PreviousSurname)%> </div> <div class="editor-label"> <%= Html.LabelFor(model => model.Person.Email)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Person.Email)%> <%= Html.ValidationMessageFor(model => model.Person.Email)%> </div> <p> <input type="submit" value="Save" /> </p> </fieldset> <% } % And the Person class looks like: [MetadataType(typeof(Person_Validation))] public partial class Person { public Person() { } } [Bind(Exclude = "ID")] public class Person_Validation { public int ID { get; private set; } public string Title { get; set; } public string Forename { get; set; } public string Surname { get; set; } public System.DateTime DOB { get; set; } public string Nationality { get; set; } public string Occupation { get; set; } public string CountryOfResidence { get; set; } public string PreviousNameForename { get; set; } public string PreviousSurname { get; set; } public string Email { get; set; } } And ViewModel: public class FormationViewModel { public Company Company { get; set; } public Address RegisteredAddress { get; set; } public Person Person { get; set; } public PersonType PersonType { get; set; } public int CurrentStep { get; set; } } }

Read the article

Can't get my OpenVpn client to connect

- by Larry

Hi Guys, I am trying to setup a test vpn between my home desktop and my laptop. So far I have got the server on the desktop to connect fine but I can not get my laptop to finish the connection. I have tried several different configurations and they all give me the same result. Obviously it has nothing to do with my Client configuration but possibly something on my laptop? Here is the message I get in the log when it stops then times out and restarts. Mon Oct 18 20:10:55 2010 UDPv4 link local: [undef] Mon Oct 18 20:10:55 2010 UDPv4 link remote: 74.190.29.236:1194 Mon Oct 18 20:11:55 2010 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Oct 18 20:11:55 2010 TLS Error: TLS handshake failed here are my configurations server.ovpn port 1194 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.1 255.255.255.252 ifconfig-pool-persist ipp.txt push "route 10.0.0.1 255.255.255.0" push "dhcp-option WINS 10.0.0.5" push "dhcp-option DNS 10.0.0.5" push "dhcp-option DOMAIN acme.com.local" keepalive 10 120 comp-lzo max-clients 1 persist-key persist-tun status openvpn-status.log verb 3 LArry.ovpn client proto udp dev tun remote doublel.hopto.org 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 dev tun local 206.162.148.9 remote 134.28.54.2 ifconfig 192.168.99.1 192.168.99.2 route 10.0.0.0 255.0.0.0 192.168.99.2 I just need a simple vpn for one user. Am I headed down the right path? Thanks, Larry

Read the article

openvpn TCP/UDP slow SSH/SMB performance

- by Petr Latal

I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

Read the article

Run script before shutdown/restart

- by dtbarne

I'd like to run a PHP script when an instance is told to shutdown, but of course before it actually finishes shutting down. My particular script is just looking to push some log files from the local partition to a another server. I've got the gist of how this process works, but I need some clarification. How I understand it. Please correct me if I'm wrong. Create an executable script in /etc/init.d (lets call it /etc/init.d/push-logs) Create a symlink to /etc/init.d/push-logs from /etc/rc0.d (shutdown) and /etc/rc6.d (reboot). The name should be KXXpush-logs Here's my questions: Of course - am I understanding correctly? For #2 above - it sounds like the lower the XX the better - is there too low a number I can use? Does it matter if it shares a number with another script? Does the script in /etc/init.d/push-logs HAVE to follow the standard init.d template (supporting start/stop, etc. commands)? This doesn't really apply to my use case. If possible I just want the script to be the following: #!/bin/sh # # Run PHP file prior to shutdown # /usr/bin/php /path/to/php_file.php

Read the article

OpenVPN Client timing out

- by Austin

I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

Read the article

Can OpenVPN invoke DHCP Client?

- by Ency

I have got working VPN connection through openvpn, but I would like to use also my DHCP server and not openvpn's push feature. Currently everything works fine, but I have to manually start dhcp client, eg. dhclient tap0 and I get IP and other important stuff from my DHCP, is there any directive which start DHCP Client when connection is established? There is my client's config: remote there.is.server.com float dev tap tls-client #pull port 1194 proto tcp-client persist-tun dev tap0 #ifconfig 192.168.69.201 255.255.255.0 #route-up "dhclient tap0" #dhcp-renew ifconfig 0.0.0.0 255.255.255.0 ifconfig-noexec ifconfig-nowarn ca /etc/openvpn/ca.crt cert /etc/openvpn/encyNtb_openvpn_client.crt key /etc/openvpn/encyNtb_openvpn_client.key dh /etc/openvpn/dh-openvpn.dh ping 10 ping-restart 120 comp-lzo verb 5 log-append /var/log/openvpn.log Here comes server's config: mode server tls-server dev tap0 local servers.ip.here port 1194 proto tcp-server server-bridge # Allow comunication between clients client-to-client # Allowing duplicate users per one certificate duplicate-cn # CA Certificate, VPN Server Certificate, key, DH and Revocation list ca /etc/ssl/CA/certs/ca.crt cert /etc/ssl/CA/certs/openvpn_server.crt key /etc/ssl/CA/private/openvpn_server.key dh /etc/ssl/CA/dh/dh-openvpn.dh crl-verify /etc/ssl/CA/crl.pem # When no response is recieved within 120seconds, client is disconected keepalive 10 60 persist-tun persist-key user openvpn group openvpn # Log and Connected clients file log-append /var/log/openvpn verb 3 status /var/run/openvpn/vpn.status 10 # Compression comp-lzo #Push data to client push "route-gateway 192.168.69.1" push "redirect-gateway def1"

Read the article

Cannot browse ipv4 websites (OpenVPN )

- by user1494428

I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

Read the article

OpenVPN - Cannot browse ipv4 websites

- by user1494428

I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is I can only browse websites which support ipv6 like google. http://whatismyv6.com/ reports me that I've an ipv6 adress, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

Read the article

Master does not appear to be a git repository error

- by EmmyS

I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

Read the article

Re: Help with Boost Grammar

- by Decmac04

I have redesigned and extended the grammar I asked about earlier as shown below: // BIFAnalyser.cpp : Defines the entry point for the console application. // // /*============================================================================= Copyright (c) Temitope Jos Onunkun 2010 http://www.dcs.kcl.ac.uk/pg/onun/ Use, modification and distribution is subject to the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) =============================================================================*/ //////////////////////////////////////////////////////////////////////////// // // // B Machine parser using the Boost "Grammar" and "Semantic Actions". // // // //////////////////////////////////////////////////////////////////////////// include include include include include include //////////////////////////////////////////////////////////////////////////// using namespace std; using namespace boost::spirit; //////////////////////////////////////////////////////////////////////////// // // Semantic Actions // //////////////////////////////////////////////////////////////////////////// // // namespace { //semantic action function on individual lexeme void do_noint(char const* start, char const* end) { string str(start, end); if (str != "NAT1") cout << "PUSH(" << str << ')' << endl; } //semantic action function on addition of lexemes void do_add(char const*, char const*) { cout << "ADD" << endl; // for(vector::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) // cout << *vi << " "; } //semantic action function on subtraction of lexemes void do_subt(char const*, char const*) { cout << "SUBTRACT" << endl; } //semantic action function on multiplication of lexemes void do_mult(char const*, char const*) { cout << "\nMULTIPLY" << endl; } //semantic action function on division of lexemes void do_div(char const*, char const*) { cout << "\nDIVIDE" << endl; } // // vector flowTable; //semantic action function on simple substitution void do_sSubst(char const* start, char const* end) { string str(start, end); //use boost tokenizer to break down tokens typedef boost::tokenizer Tokenizer; boost::char_separator sep(" -+/*:=()",0,boost::drop_empty_tokens); // char separator definition Tokenizer tok(str, sep); Tokenizer::iterator tok_iter = tok.begin(); pair dependency; //create a pair object for dependencies //create a vector object to store all tokens vector dx; // int counter = 0; // tracks token position for(tok.begin(); tok_iter != tok.end(); ++tok_iter) //save all tokens in vector { dx.push_back(*tok_iter ); } counter = dx.size(); // vector d_hat; //stores set of dependency pairs string dep; //pairs variables as string object // dependency.first = *tok.begin(); vector FV; for(int unsigned i=1; i < dx.size(); i++) { // if(!atoi(dx.at(i).c_str()) && (dx.at(i) !=" ")) { dependency.second = dx.at(i); dep = dependency.first + "|-" + dependency.second + " "; d_hat.push_back(dep); vector<string> row; row.push_back(dependency.first); //push x_hat into first column of each row for(unsigned int j=0; j<2; j++) { row.push_back(dependency.second);//push an element (column) into the row } flowTable.push_back(row); //Add the row to the main vector } } //displays internal representation of information flow table cout << "\n****************\nDependency Table\n****************\n"; cout << "X_Hat\tDx\tG_Hat\n"; cout << "-----------------------------\n"; for(unsigned int i=0; i < flowTable.size(); i++) { for(unsigned int j=0; j<2; j++) { cout << flowTable[i][j] << "\t "; } if (*tok.begin() != "WHILE" ) //if there are no global flows, cout << "\t{}"; //display empty set cout << "\n"; } cout << "***************\n\n"; for(int unsigned j=0; j < FV.size(); j++) { if(FV.at(j) != dependency.second) dep = dependency.first + "|-" + dependency.second + " "; d_hat.push_back(dep); } cout << "PUSH(" << str << ')' << endl; cout << "\n*******\nDependency pairs\n*******\n"; for(int unsigned i=0; i < d_hat.size(); i++) cout << d_hat.at(i) << "\n...\n"; cout << "\nSIMPLE SUBSTITUTION\n\n"; } //semantic action function on multiple substitution void do_mSubst(char const* start, char const* end) { string str(start, end); cout << "PUSH(" << str << ')' << endl; //cout << "\nMULTIPLE SUBSTITUTION\n\n"; } //semantic action function on unbounded choice substitution void do_mChoice(char const* start, char const* end) { string str(start, end); cout << "PUSH(" << str << ')' << endl; cout << "\nUNBOUNDED CHOICE SUBSTITUTION\n\n"; } void do_logicExpr(char const* start, char const* end) { string str(start, end); //use boost tokenizer to break down tokens typedef boost::tokenizer Tokenizer; boost::char_separator sep(" -+/*=:()<",0,boost::drop_empty_tokens); // char separator definition Tokenizer tok(str, sep); Tokenizer::iterator tok_iter = tok.begin(); //pair dependency; //create a pair object for dependencies //create a vector object to store all tokens vector dx; for(tok.begin(); tok_iter != tok.end(); ++tok_iter) //save all tokens in vector { dx.push_back(*tok_iter ); } for(unsigned int i=0; i cout << "PUSH(" << str << ')' << endl; cout << "\nPREDICATE\n\n"; } void do_predicate(char const* start, char const* end) { string str(start, end); cout << "PUSH(" << str << ')' << endl; cout << "\nMULTIPLE PREDICATE\n\n"; } void do_ifSelectPre(char const* start, char const* end) { string str(start, end); //if cout << "PUSH(" << str << ')' << endl; cout << "\nPROTECTED SUBSTITUTION\n\n"; } //semantic action function on machine substitution void do_machSubst(char const* start, char const* end) { string str(start, end); cout << "PUSH(" << str << ')' << endl; cout << "\nMACHINE SUBSTITUTION\n\n"; } } //////////////////////////////////////////////////////////////////////////// // // Machine Substitution Grammar // //////////////////////////////////////////////////////////////////////////// // Simple substitution grammar parser with integer values removed struct Substitution : public grammar { template struct definition { definition(Substitution const& ) { machine_subst = ( (simple_subst) | (multi_subst) | (if_select_pre_subst) | (unbounded_choice) )[&do_machSubst] ; unbounded_choice = str_p("ANY") ide_list str_p("WHERE") predicate str_p("THEN") machine_subst str_p("END") ; if_select_pre_subst = ( ( str_p("IF") predicate str_p("THEN") machine_subst *( str_p("ELSIF") predicate machine_subst ) !( str_p("ELSE") machine_subst) str_p("END") ) | ( str_p("SELECT") predicate str_p("THEN") machine_subst *( str_p("WHEN") predicate machine_subst ) !( str_p("ELSE") machine_subst) str_p("END")) | ( str_p("PRE") predicate str_p("THEN") machine_subst str_p("END") ) )[&do_ifSelectPre] ; multi_subst = ( (machine_subst) *( ( str_p("||") (machine_subst) ) | ( str_p("[]") (machine_subst) ) ) ) [&do_mSubst] ; simple_subst = (identifier str_p(":=") arith_expr) [&do_sSubst] ; expression = predicate | arith_expr ; predicate = ( (logic_expr) *( ( ch_p('&') (logic_expr) ) | ( str_p("OR") (logic_expr) ) ) )[&do_predicate] ; logic_expr = ( identifier (str_p("<") arith_expr) | (str_p("<") arith_expr) | (str_p("/:") arith_expr) | (str_p("<:") arith_expr) | (str_p("/<:") arith_expr) | (str_p("<<:") arith_expr) | (str_p("/<<:") arith_expr) | (str_p("<=") arith_expr) | (str_p("=") arith_expr) | (str_p("=") arith_expr) | (str_p("=") arith_expr) ) [&do_logicExpr] ; arith_expr = term *( ('+' term)[&do_add] | ('-' term)[&do_subt] ) ; term = factor ( ('' factor)[&do_mult] | ('/' factor)[&do_div] ) ; factor = lexeme_d[( identifier | +digit_p)[&do_noint]] | '(' expression ')' | ('+' factor) ; ide_list = identifier *( ch_p(',') identifier ) ; identifier = alpha_p +( alnum_p | ch_p('_') ) ; } rule machine_subst, unbounded_choice, if_select_pre_subst, multi_subst, simple_subst, expression, predicate, logic_expr, arith_expr, term, factor, ide_list, identifier; rule<ScannerT> const& start() const { return predicate; //return multi_subst; //return machine_subst; } }; }; //////////////////////////////////////////////////////////////////////////// // // Main program // //////////////////////////////////////////////////////////////////////////// int main() { cout << "*********************************\n\n"; cout << "\t\t...Machine Parser...\n\n"; cout << "*********************************\n\n"; // cout << "Type an expression...or [q or Q] to quit\n\n"; string str; int machineCount = 0; char strFilename[256]; //file name store as a string object do { cout << "Please enter a filename...or [q or Q] to quit:\n\n "; //prompt for file name to be input //char strFilename[256]; //file name store as a string object cin strFilename; if(*strFilename == 'q' || *strFilename == 'Q') //termination condition return 0; ifstream inFile(strFilename); // opens file object for reading //output file for truncated machine (operations only) if (inFile.fail()) cerr << "\nUnable to open file for reading.\n" << endl; inFile.unsetf(std::ios::skipws); Substitution elementary_subst; // Simple substitution parser object string next; while (inFile str) { getline(inFile, next); str += next; if (str.empty() || str[0] == 'q' || str[0] == 'Q') break; parse_info< info = parse(str.c_str(), elementary_subst !end_p, space_p); if (info.full) { cout << "\n-------------------------\n"; cout << "Parsing succeeded\n"; cout << "\n-------------------------\n"; } else { cout << "\n-------------------------\n"; cout << "Parsing failed\n"; cout << "stopped at: " << info.stop << "\"\n"; cout << "\n-------------------------\n"; } } } while ( (*strFilename != 'q' || *strFilename !='Q')); return 0; } However, I am experiencing the following unexpected behaviours on testing: The text files I used are: f1.txt, ... containing ...: debt:=(LoanRequest+outstandingLoan1)*20 . f2.txt, ... containing ...: debt:=(LoanRequest+outstandingLoan1)*20 || newDebt := loanammount-paidammount || price := purchasePrice + overhead + bb . f3.txt, ... containing ...: yy < (xx+7+ww) . f4.txt, ... containing ...: yy < (xx+7+ww) & yy : NAT . When I use multi_subst as start rule both files (f1 and f2) are parsed correctly; When I use machine_subst as start rule file f1 parse correctly, while file f2 fails, producing the error: “Parsing failed stopped at: || newDebt := loanammount-paidammount || price := purchasePrice + overhead + bb” When I use predicate as start symbol, file f3 parse correctly, but file f4 yields the error: “ “Parsing failed stopped at: & yy : NAT” Can anyone help with the grammar, please? It appears there are problems with the grammar that I have so far been unable to spot.

Read the article

System.InvalidOperationException in Output Window

- by user318068

I constantly get the following message in my output/debug windows. The app doesn't crash but I was wondering what the deal with it is: A first chance exception of type 'System.InvalidOperationException' occurred in System.dll my code :sol.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication1 { class Sol { public LinkedList<int> tower1 = new LinkedList<int>(); public LinkedList<int> tower2 = new LinkedList<int>(); public LinkedList<int> tower3 = new LinkedList<int>(); public static LinkedList<string> BFS = new LinkedList<string>(); public static LinkedList<string> DFS = new LinkedList<string>(); public static LinkedList<string> IDS = new LinkedList<string>(); public int depth; public LinkedList<Sol> neighbors; public Sol() { } public Sol(LinkedList<int> tower1, LinkedList<int> tower2, LinkedList<int> tower3) { this.tower1 = tower1; this.tower2 = tower2; this.tower3 = tower3; neighbors = new LinkedList<Sol>(); } public virtual void getneighbors() { Sol temp = this.copy(); Sol neighbor1 = this.copy(); Sol neighbor2 = this.copy(); Sol neighbor3 = this.copy(); Sol neighbor4 = this.copy(); Sol neighbor5 = this.copy(); Sol neighbor6 = this.copy(); if (temp.tower1.Count != 0) { if (neighbor1.tower2.Count != 0) { if (neighbor1.tower1.First.Value < neighbor1.tower2.First.Value) { neighbor1.tower2.AddFirst(neighbor1.tower1.First); neighbor1.tower1.RemoveFirst(); neighbors.AddLast(neighbor1); } } else { neighbor1.tower2.AddFirst(neighbor1.tower1.First); neighbor1.tower1.RemoveFirst(); neighbors.AddLast(neighbor1); } if (neighbor2.tower3.Count != 0) { if (neighbor2.tower1.First.Value < neighbor2.tower3.First.Value) { neighbor2.tower3.AddFirst(neighbor2.tower1.First); neighbor2.tower1.RemoveFirst(); neighbors.AddLast(neighbor2); } } else { neighbor2.tower3.AddFirst(neighbor2.tower1.First); neighbor2.tower1.RemoveFirst(); neighbors.AddLast(neighbor2); } } //------------- if (temp.tower2.Count != 0) { if (neighbor3.tower1.Count != 0) { if (neighbor3.tower2.First.Value < neighbor3.tower1.First.Value) { neighbor3.tower1.AddFirst(neighbor3.tower2.First); neighbor3.tower2.RemoveFirst(); neighbors.AddLast(neighbor3); } } else { neighbor3.tower1.AddFirst(neighbor3.tower2.First); neighbor3.tower2.RemoveFirst(); neighbors.AddLast(neighbor3); } if (neighbor4.tower3.Count != 0) { if (neighbor4.tower2.First.Value < neighbor4.tower3.First.Value) { neighbor4.tower3.AddFirst(neighbor4.tower2.First); neighbor4.tower2.RemoveFirst(); neighbors.AddLast(neighbor4); } } else { neighbor4.tower3.AddFirst(neighbor4.tower2.First); neighbor4.tower2.RemoveFirst(); neighbors.AddLast(neighbor4); } } //------------------------ if (temp.tower3.Count() != 0) { if (neighbor5.tower1.Count() != 0) { if (neighbor5.tower3.ElementAtOrDefault(0) < neighbor5.tower1.ElementAtOrDefault(0)) { neighbor5.tower1.AddFirst(neighbor5.tower3.First); neighbor5.tower3.RemoveFirst(); neighbors.AddLast(neighbor5); } } else { neighbor5.tower1.AddFirst(neighbor5.tower3.First); neighbor5.tower3.RemoveFirst(); neighbors.AddLast(neighbor5); } if (neighbor6.tower2.Count() != 0) { if (neighbor6.tower3.ElementAtOrDefault(0) < neighbor6.tower2.ElementAtOrDefault(0)) { neighbor6.tower2.AddFirst(neighbor6.tower3.First); neighbor6.tower3.RemoveFirst(); neighbors.AddLast(neighbor6); } } else { neighbor6.tower2.AddFirst(neighbor6.tower3.First); neighbor6.tower3.RemoveFirst(); neighbors.AddLast(neighbor6); } } } public override string ToString() { string str; str = "tower1" + tower1.ToString() + " tower2" + tower2.ToString() + " tower3" + tower3.ToString(); return str; } public Sol copy() { Sol So; LinkedList<int> l1 = new LinkedList<int>(); LinkedList<int> l2 = new LinkedList<int>(); LinkedList<int> l3 = new LinkedList<int>(); for (int i = 0; i <= this.tower1.Count() - 1; i++) { l1.AddLast(tower1.ElementAt(i)); } for (int i = 0; i <= this.tower2.Count - 1; i++) { l2.AddLast(tower2.ElementAt(i)); } for (int i = 0; i <= this.tower3.Count - 1; i++) { l3.AddLast(tower3.ElementAt(i)); } So = new Sol(l1, l2, l3); return So; } public bool Equals(Sol sol) { if (this.tower1.Equals(sol.tower1) & this.tower2.Equals(sol.tower2) & this.tower3.Equals(sol.tower3)) return true; return false; } public virtual bool containedin(Stack<Sol> vec) { bool found = false; for (int i = 0; i <= vec.Count - 1; i++) { if (vec.ElementAt(i).tower1.Equals(this.tower1) && vec.ElementAt(i).tower2.Equals(this.tower2) && vec.ElementAt(i).tower3.Equals(this.tower3)) { found = true; break; } } return found; } public virtual bool breadthFirst(Sol start, Sol goal) { Stack<Sol> nextStack = new Stack<Sol>(); Stack<Sol> traversed = new Stack<Sol>(); bool found = false; start.depth = 0; nextStack.Push(start); while (nextStack.Count != 0) { Sol sol = nextStack.Pop(); BFS.AddFirst("poped State:" + sol.ToString() + "level " + sol.depth); traversed.Push(sol); if (sol.Equals(goal)) { found = true; BFS.AddFirst("Goal:" + sol.ToString()); break; } else { sol.getneighbors(); foreach (Sol neighbor in sol.neighbors) { if (!neighbor.containedin(traversed) && !neighbor.containedin(nextStack)) { neighbor.depth = (sol.depth + 1); nextStack.Push(neighbor); } } } } return found; } public virtual bool depthFirst(Sol start, Sol goal) { Stack<Sol> nextStack = new Stack<Sol>(); Stack<Sol> traversed = new Stack<Sol>(); bool found = false; start.depth = 0; nextStack.Push(start); while (nextStack.Count != 0) { //Dequeue next State for comparison //And add it 2 list of traversed States Sol sol = nextStack.Pop(); DFS.AddFirst("poped State:" + sol.ToString() + "level " + sol.depth); traversed.Push(sol); if (sol.Equals(goal)) { found = true; DFS.AddFirst("Goal:" + sol.ToString()); break; } else { sol.getneighbors(); foreach (Sol neighbor in sol.neighbors) { if (!neighbor.containedin(traversed) && !neighbor.containedin(nextStack)) { neighbor.depth = sol.depth + 1; nextStack.Push(neighbor); } } } } return found; } public virtual bool iterativedeepening(Sol start, Sol goal) { bool found = false; for (int level = 0; ; level++) { Stack<Sol> nextStack = new Stack<Sol>(); Stack<Sol> traversed = new Stack<Sol>(); start.depth = 0; nextStack.Push(start); while (nextStack.Count != 0) { Sol sol = nextStack.Pop(); IDS.AddFirst("poped State:" + sol.ToString() + "Level" + sol.depth); traversed.Push(sol); if (sol.Equals(goal)) { found = true; IDS.AddFirst("Goal:" + sol.ToString()); break; } else if (sol.depth < level) { sol.getneighbors(); foreach (Sol neighbor in sol.neighbors) { if (!neighbor.containedin(traversed) && !neighbor.containedin(nextStack)) { neighbor.depth = sol.depth + 1; nextStack.Push(neighbor); } //end if } //end for each } //end else if } // end while if (found == true) break; } // end for return found; } } } Just wondering if I may be doing something wrong somewhere or something.

Search Results

Search found 28661 results on 1147 pages for 'push back'.

Page 85/1147 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92 | Next Page >

- by Eric

- by Maxwell

- by Brian

- by tednewk

- by OrangeTux

- by lacrosse1991

- by Prerak

- by dwahlin

- by Dave Campbell

- by Keoki Zee

- by Cold Hawaiian

- by Ryan

- by Sowjanya

- by yinon

- by Paul Connolly

- by Larry

- by Petr Latal

- by dtbarne

- by Austin

- by Ency

- by user1494428

- by user1494428

- by EmmyS

- by Decmac04

- by user318068

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92 | Next Page >