Search Results

Search found 60689 results on 2428 pages for 'windows xp embedded'.

Page 852/2428 | < Previous Page | 848 849 850 851 852 853 854 855 856 857 858 859  | Next Page >

• ISA Server 2006 SSL Certificate Dilemma

  - by JohnyD

  I'm making so great headway in offering our services over https with help from a Go Daddy certificate, later to be upgraded to Thawte SSL123 certs. But, I've just run into one whopper of a problem. Here's my setup: I run an ISA 2006 firewall. Our web services are distributed over 2 servers. One is Windows 2000 (www.domain.com) and the other is Windows 2003 (services.domain.com). So, I'll need to purchase 2 certs for both www and services, import them into IIS6 on their respective machines, then export them with the primary key (making sure to Include all certificates in the certification path if possible... that had me stumped for a while), and then to finally import them into ISA's local computer Personal store. The problem I've just run into is that I have separate firewall rules for services.domain.com and www.domain.com... because requests need to be forwarded to different web servers. Each of these firewall rules use the same httplistener. I have just found out that you can only use 1 certificate per httplistener. To make matters worse you can only have a single httplistener per ip / port. Is this correct? I can only use a single certificate for a single ip address? This would seem to be a severe limitation. Am I wrong? If I'm not then I've got a whole lot more work ahead of me as I'll have to set up extra ip's, add them to the firewall's network interface, create new listeners using that ip, etc... Can someone please confirm that I'm doing this correctly / incorrectly? Once I got my head wrapped around it all it seemed easy... then this. Thanks in advance.

  Read the article

• Two domains, two servers, one dynamic IP address

  - by giantman

  I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

  Read the article

• Browsers hang when loading web pages

  - by avalanchis

  HP Laptop with Windows Vista Home Premium, Service Pack 2. Problem affects IE8 and Firefox. When attempting to browse most web sites, browser loads web site title in browser's title bar, then displays "Waiting for site url" and never completes loading the page. Able to connect to www.google.com with no problems. Unable to connect to www.carbonwy.com, www.wsj.com, www.cnn.com, www.microsoft.com, etc. Other PCs on same subnet are all able to connect to these sites without any problem. nslookup resolves all of these sites without any problem, so DNS does not appear to be the problem. Windows Firewall is disabled. Norton 360 was previously installed but has been uninstalled. No other firewall software is installed. IE8 Protected Mode is off. IE8 advanced settings have been reset. IE8 user settings have been reset. After reset, IE8 tries to connect to http://hp-laptop.aol.com and go.microsoft.com but same symptoms persist. Title bar loads, then nothing. System has been restarted numerous times. Running out of ideas. Please help!

  Read the article

• Grant access for users on a separate domain to SharePoint

  - by Geo Ego

  Hello. I just completed development of a SharePoint site on a virtual server and am currently in the process of granting users from a different domain to the site. The SharePoint domain is SHAREPOINT, and the domain with the users I want to give access to is COMPANY. I have provided them with a link to the site and added them as users via SharePoint, which is all I thought I would need to do. However, when they go to the link, the site shows them a SharePoint error page. In the security event log, I am showing the following: Event Type: Failure Audit Event Source: Security Event Category: Object Access Event ID: 560 Date: 3/18/2010 Time: 11:11:49 AM User: COMPANY\ThisUser Computer: SHAREPOINT Description: Object Open: Object Server: Security Account Manager Object Type: SAM_ALIAS Object Name: DOMAINS\Account\Aliases\00000404 Handle ID: - Operation ID: {0,1719489} Process ID: 416 Image File Name: C:\WINDOWS\system32\lsass.exe Primary User Name: SHAREPOINT$ Primary Domain: COMPANY Primary Logon ID: (0x0,0x3E7) Client User Name: ThisUser Client Domain: PRINTRON Client Logon ID: (0x0,0x1A3BC2) Accesses: AddMember RemoveMember ListMembers ReadInformation Privileges: - Restricted Sid Count: 0 Access Mask: 0xF Then, four of these in a row: Event Type: Failure Audit Event Source: Security Event Category: Object Access Event ID: 560 Date: 3/18/2010 Time: 11:12:08 AM User: NT AUTHORITY\NETWORK SERVICE Computer: SHAREPOINT Description: Object Open: Object Server: SC Manager Object Type: SERVICE OBJECT Object Name: WinHttpAutoProxySvc Handle ID: - Operation ID: {0,1727132} Process ID: 404 Image File Name: C:\WINDOWS\system32\services.exe Primary User Name: SHAREPOINT$ Primary Domain: COMPANY Primary Logon ID: (0x0,0x3E7) Client User Name: NETWORK SERVICE Client Domain: NT AUTHORITY Client Logon ID: (0x0,0x3E4) Accesses: Query status of service Start the service Query information from service Privileges: - Restricted Sid Count: 0 Access Mask: 0x94 Any ideas what permissions I need to grant to the user to get them access to SharePoint?

  Read the article

• Can't successfully run Sharepoint Foundation 2010 first time configuration

  - by Robert Koritnik

  I'm trying to run the non-GUI version of configuration wizard using power shell because I would like to set config and admin database names. GUI wizard doesn't give you all possible options for configuration (but even though it doesn't do it either). I run this command: New-SPConfigurationDatabase -DatabaseName "Sharepoint2010Config" -DatabaseServer "developer.mydomain.pri" -AdministrationContentDatabaseName "Sharepoint2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureString "%h4r3p0int" -AsPlainText -Force) Of course all these are in the same line. I've broken them down into separate lines to make it easier to read. When I run this command I get this error: New-SPConfigurationDatabase : Cannot connect to database master at SQL server a t developer.mydomain.pri. The database might not exist, or the current user does not have permission to connect to it. At line:1 char:28 + New-SPConfigurationDatabase <<<< -DatabaseName "Sharepoint2010Config" -Datab aseServer "developer.mydomain.pri" -AdministrationContentDatabaseName "Sharepoint 2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureS tring "%h4r3p0int" -AsPlainText -Force) + CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase: SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPExcep tion + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon figurationDatabase I created two domain accounts and haven't added them to any group: SPF_DATABASE - database account SPF_ADMIN - farm account I'm running powershell console as domain administrator. I've tried to run SQL Management studio as domain admin and created a dummy database and it worked without a problem. I'm running: Windows 7 x64 on the machine where Sharepoint Foundation 2010 should be installed and also has preinstalled SQL Server 2008 R2 database Windows Server 2008 R2 Server Core is my domain controller that just serves domain features and nothing else I've installed Sharepoint according to MS guides http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx installing all additional patches that are related to my configuration. Any ideas what should I do to make it work?

  Read the article

• Cannot open files in Visual Studio but in Delphi and Notepad

  - by Andrew J. Brehm

  About an hour ago Visual Studio 2008 decided that it cannot find files any more. This is on 64 bit Windows Vista. When I right-click on a text file (source code or otherwise) and select "open with" and "Visual Studio 2008", I get the following error (example): Windows cannot find 'C:\Users\ajbrehm\Documents\Visual Studio 2008\Projects\Hello Prism\Hello Prism\Main.pas'. Make sure you typed the name correctly, and then try again. When I right-click the same file and select "open with" and "Delphi 2010" or "Notepad" (both other options available for text files on my system), the file opens correctly. Oddly enough when the file is part of a Visual Studio project and I open the project itself with Visual Studio (this works), I can open the file from within Visual Studio. Any ideas what might be going on? This started about an hour after I made a complete backup of my Vista VM and after I installed IIS 7, SQL Express, and Sourcegear Vault. The first files I noticed couldn't be opened in Visual Studio any more where Pascal source files in checked-outed folders from Vault. And Vault also seems to be unable to see one of the sources files and claims they don't exist. I found out about Visual Studio not opening ANY files any more when I tried to recreate the file Vault refused to see. Update: I just checked. Another user, "administrator", can still open text files with Visual Studio 2008. Both users have administrator rights. Update: I just restored the hours-old backup. Same problem. Apparently whatever triggered this happened before the install of IIS 7 and SQL Express. Never noticed it before.

  Read the article

• Improving Performance of RDP Over LAN

  - by Jared Brown

  Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

  Read the article

• Task Scheduler not able to execute .vbs successfully

  - by Django Reinhardt

  Hi there, got this weird problem, which will hopefully have an obvious solution for some enlightened soul: We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs script stopped successfully executing... but oddly it worked fine when ran manually! The error given in these circumstances was always "Timeout". We thought we try a little creative thinking, and run the .vbs another way: Via a .bat file. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file is nothing more than... CScript "C:\location\script.vbs" > Log.txt But the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The log.txt file says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

  Read the article

• Why does my computer crash randomly?

  - by Donavon Decker

  The other day I went out to my van to get my Tower and when I opened the trunk it fell out. I brought it into the house and opened it, and everything looked ok. When I started it up, about 1-3 minutes afterwards it would crash. It did this over and over until I reseated the cooler. Everything seemed normal again, until after about 10 minutes of gameplay (any game), it would crash. I reseated my GPU + reinstalled the drivers, however I still get the same error. A while back, I'd check my 'Windows Rating' periodically, and all of them were in the '6.0-6.9' range except for my hard disk usage (always been like that [not relative]). Today I went in and looked, and my Processor and Memory was rated 5.4. I reseated my cpu and my memory, refreshed the windows rating, and then my processor and memory went from 5.4, to 5.1. A few minutes ago I reseated them once again, and now it's back to 5.4. Note: Not sure if this is relevant to the issue, but I updated my bios earlier today I honestly have no idea what the issue is, but I'm getting aggravated at the problem. Here are some images which contain images of my specifications: i1271.photobucket.com/albums/jj623/donxdeck/1_zps09f0607c.jpg i1271.photobucket.com/albums/jj623/donxdeck/4_zps381cd00a.jpg i1271.photobucket.com/albums/jj623/donxdeck/3_zps54bba720.jpg i1271.photobucket.com/albums/jj623/donxdeck/2_zps945d3d72.jpg Thanks for the help

  Read the article

• Can't find standalone Chrome Gmail client that I know exists

  - by Carson

  I'm on Windows. A couple years ago when I switched from Outlook to Gmail (Google Apps), Google provided this awesome little standalone gmail client that was just a single-purpose Chrome install. It launched like a normal application, stayed updated when I updated Chrome. It was Chrome in a separate application that launched only gmail, stayed logged in really well, and "felt" like a gmail mail client, with the gmail interface. It had it's own little red envelope icon, it was a windows app. (I remember there was no Mac equivalent.) I found it while looking through the "this is how you get your company to switch to gmail" documentation that Google provided. I just repaved my box and now I'm looking for this thing again, and I had no idea it would be impossible to find. I've spent literally 2 hours looking, searching, googling, etc. I'm losing my mind. Anyone know how I can get my hands on this? I used it all day every day for 2 years, so I know it exists :), but I can not find it. Any assistance would be gratefully received.

  Read the article

• Cannot start listening on a certain TCP port, but there's nothing currently listening on it

  - by John Rasch

  I have Windows Service that uses a WCF service host to listen for connections on TCP port 61000. When I try to start the service, I get the error: Service cannot be started. System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:61000/ because TCP port 61000 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file because it is being used by another process at System.Net.HttpListener.AddAll() at System.Net.HttpListener.Start() at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen() --- End of inner exception stack trace --- at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen() at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener) at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback) at System.ServiceModel.Channels.HttpChannelListener.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout) at... A quick netstat -a shows there is nothing listening on port 61000. I've also found several posts online that mention reserving namespaces using netstat, but the account that the service runs under has administrator privileges so that shouldn't be necessary. Any other ideas as to why I'm getting this message? This service is running on 64-bit Windows Server 2008 R2 Standard.

  Read the article

• Looking for a comprehensive/"expert" guide to BCD parameters

  - by Stilez

  I'm interested in educating myself about BCD on Windows 8. There are many, many "walkthrough" guides" and "howtos", but I can't find any guides at typical "enthusiast" level covering what each option or argument in a BCD /ENUM dump might mean, and the principles governing how these all work together. Imagine trying to rebuild or debug BCD (including EFI/BIOS variants and recovery/hibernate/memtest sections, and perhaps multiple boot Windows/WinPE/WinRE) from scratch using just BCDedit + DiskPart, and trying to understand rather than just copy/pasting commands. That's roughly the knowledge I'm after. Example questions might be: How is a BCD /ENUM dump to be read, item by item? How do its sections work together? (A lot of guides only show a specific example rather than explaining all the all common args that can exist and what they mean, they don't actually explain how sections work together, or they assume MBR/BIOS/Vista/7 and omit info needed for EFI/GPT/Dynamic disks/8) Partitions are specified by volume letter or as a \Device\HarddiskVolumeNNN. Why does it sometimes show these items as a letter and sometimes as a GUID? What are the practical differences if any? What exactly is syntax like "ramdisk=[C:]\Images\winpe.wim,{ramdiskoptions}" saying, and how will the drive letter "C" be interpreted at runtime in a line like this? Is the drive in such a line always "C:" (most examples assume so) and if not, when wouldn't it be? Many websites state that an sdi device and path may be needed in some sections of BCD, but what is sdi and what are these args doing when they appear? How does the GUID to HDD volume/partition mapping work under EFI/GPT? So that if disks or partitions/volumes change it's clear how one can confirm from basic principles whether data shown in BCD /ENUM ALL is still correct or not. Does anyone know of a suitable reference source for this kind of raw BCD data and structures? Thanks!

  Read the article

• Can't view other computers on Network

  - by Darkart

  Systems: My Machine: Windows 7 Ultimate connected through ethernet into router Her Machine--Other Machine: Windows 7 Ultimate connected through wireless Router:F5D8236-4 N Wireless Router Version 1 Firmware: 2.01.03 (Apr 28 2009) ISP: Comcast Problem: I can not view the "Other Machine" on the network at all. I opened command prompt and ran net view and saw the pc name. I tried pinging the pc and it times out. Went inside the router and tried viewing the computer on the DHCP list and it can not be seen. I restored the router back to default settings and firmware and completely reset the modem and router, and created home group. I went to the other machine to configure home group settings and made sure that both PC's had identical settings. She was able to see my machine but I could not see hers. I restarted both machines and now we cant see each other at all. Also her PC ("Other Machine") had exclamation mark in the wireless icon but was connected just fine. There is no firewalls on currently or anti-virus enabled, and still can not see each other. Right now I am checking for updated drivers for the wireless card, but my question is could it be the router or something hardware related? I have went through all the settings in the Home group and visited most FAQ's and still no luck. Also as it stands I can not view her machine inside the router DHCP Client List :(

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• Automatically install driver on headless WHSv1 system

  - by Dan Neely

  I have one of the HP Mediasmart Windows Home Server v1 boxes. It's network port appears to have died a few days ago but the system is not giving any other sign of failure: No activity lights activate on either side of the cable when connected to my gigabit switch; when connected to one of my routers 100 megabit ports the lights turn on but it remains unreachable over the network and my router never lists it as among DHCP clients. I bought a USB-ethernet adapter to temporarily get it back online; but the adapter needs a driver to work which I can't install because the system is headless by design (no video out, no PCI/PCIe slots) with admin access only available via the WHS client or remote desktop. Both of those options require network connectivity and are consequently unavailable. I tried copying the drivers to a flash drive; but Windows either didn't look there or none of the drivers provided were suitable (Win8, Win7, or combined XP and Vista). I've been told that a USB WiFi adapter would have the same driver problem.

  Read the article

• Can't connect to Sql Server 2008 named instance

  - by eidylon

  I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

  Read the article

• How can I erase the traces of Folder Redirection from the Default Domain Policy

  - by bruor

  I've taken over from an IT outsourcer and have found a struggle now that we're starting a migration to windows 7. Someone decided that they would setup Folder redirection in the Default Domain Policy. I've since configured redirection in another policy at an OU level. No matter what I do, the windows 7 systems pick up the Default Domain Policy folder redirection settings only. I keep getting entries in the event log showing that the previously redirected folders "need to be redirected" with a status of 0x80000004. From what I can tell this just means that it's redirecting them locally. Is there a way I can wipe that section of the GPO clean so it's no longer there? I'm hesitant to try to reset the default domain policy to complete defaults. ***UPDATE 6-26 I found that the following condition occurred and was causing the grief here. I've already implemented the new policies for clients, and for some reason, XP was working great, 7 was refusing to process. The DDP was enforced. Because of this, and the fact that the folder redirection policies were set to redirect back to the local profile upon removal, it was forcing clients to pick up it's "redirect to local" settings. Requirements for to recreate the issue. -Create a new test OU and policy. -Create some folder redirection settings, set them to redirect to local upon removal -Remove settings on that GPO -Refresh your view of the GPO and check the settings. -You'll notice that the settings show "not configured" entries for folder redirection. -Enforce this GPO -Create another sub-OU -Create a GPO linked to this sub-ou and configure some folder redirection settings. -Watch as the enforced GPOs "not configured" setting overrides the policy you just defined. I've had to relink the DDP to all OU's that have "block inheritance" enabled, and disable the "enforced" option on the DDP as a workaround. I'd love to re-enable enforcement of the DDP, but until I can erase the traces of folder redirection settings from the DDP, I think I'm stuck.

  Read the article

• Change the Default Date setting in Word 2010

  - by Chris

  I am using Word 2010 and Windows 7. You know how when you start typing a date in Word it will automatically suggest what it thinks you want? Like if I start typing “6/29”, a little grey bubble will display “6/29/13 (Press ENTER to Insert)”. How do I get it so the bubble will display the year in a 4 digit format, such as "6/29/2013 (Press Enter to Insert)"? The below picture is how it looks when typing a date into Word. I have already gone to the Date & Time option under the Insert menu and the date format that I want is already selected. I think this is only for using quickparts anyway, so the date automatically updates when you open a document. The Region and Language settings under the Control Panel are correct as well. I thought at one point I found it somewhere under options, but I am sure I looked through everything many times and I can’t find it. I posted this exact question at the Microsoft website and someone replied: Go to the Windows Control Panel and click on Clock, Language and Region and then on Change the date, time, or number format and then modify the Short date format so that it is what you want to be used. So please don't suggest this again, because in my question I did say that I already tried this and it doesn't work, at least not for Word, in this situation. Thanks.

  Read the article

• How to install QEMU on Damn Small Linux?

  - by user2934303

  i'm trying to install QEMU on a Damn Small Linux installation in order to emulate pentium features in a 486 computer. Though DSL was descontinued, it's the only linux that runs reasonably on the 486 processor, most recent kernels doesn't even boot on 486 architecture. I tried Tiny Core Linux, but it doesn't work in 486, so i seem to have no escape here. The most recent image of DSL is from 2008, it uses kernel 2.4.x, and i couldn't find a way to compile QEMU on it. Firstly, it lacks several compile tools needed for compiling it, and, it have several dependency problems. I tried some pre-compiled packages, but the only one that worked was a QEMU 5.2 RPM package (it didn't had dependency problems), and it was way too old, it wasn't capable of running windows yet, it just gave me the option of emulating a code, not a full OS as windows, and it also didn't give me the option to choose which architecture i wanted it to emulate (-cpu option). Can anyone help me with this? Also, if someone can think of some alternative to it, i'd be grateful. Thanks.

  Read the article

• WIM2VHD failing with "Cannot derive Volume GUID from mount point."

  - by Jacob

  I'm trying to use WIM2VHD according to the instructions on Scott Hanselman's blog post to create a Sysprepped VHD image to boot from. I've installed the WAIK, and I have my Windows 7 sources mounted as a virtual drive. When I try to run WIM2VHD like this: cscript WIM2VHD.wsf /wim:F:\sources\install.wim /sku:Ultimate /vhd:E:\WindowsSeven.vhd /size:30721 I get the following log: Log for WIM2VHD 6.1.7600.0 on 11/2/2009 at 10:51:18.16 Copyright (C) Microsoft Corporation. All rights reserved. MACHINE INFO: Build=7600 Platform=x86fre OS=Windows 7 Ultimate ServicePack= Version=6.1 BuildLab=win7_rtm BuildDate=090713-1255 Language=en-ZA INFO: Looking for IMAGEX.EXE... INFO: Looking for BCDBOOT.EXE... INFO: Looking for BCDEDIT.EXE... INFO: Looking for REG.EXE... INFO: Looking for DISKPART.EXE... INFO: Session key is E01E1ED7-C197-4814-BDE4-43B73E14FCC4 INFO: Inspecting the WIM... INFO: Configuring and formatting the VHD... ******************************************************************************* Error: 0: Cannot derive Volume GUID from mount point. ******************************************************************************* INFO: Unmounting the VHD due to error... WARNING: In order to help resolve the issue, temporary files have not been deleted. They are in: C:\Users\Jacob\AppData\Local\Temp\WIM2VHD.WSF\E01E1ED7-C197-4814-BDE4-43B73E14FCC4 *emphasized text*Summary: Errors: 1, Warnings: 1, Successes: 0 INFO: Done. Any ideas?

  Read the article

• Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace

  - by Nick

  I have an laptop top hard drive I was trying to use to my new media computer. The case is small and can accommodate for 2 2.5" drives, no 3.5" drives. I had been using the hard drive as storage hard drive until now. When I go to install Windows on the hard drive first I'm prompted at the bios of: Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace. And then again in the Windows Setup, informing me that the hard drive is bad. So I did a full format of the drive and tried again. Same error. So I took it out and hooked it back up to my other computer via an Sata usb adapter kit (maybe the cause?). The hard drive is recognized fine and when I scanned it for errors by going: right click -> properties -> tools -> error checking It returns that the hard drive is fine. I have tried 3 different SATA cables and multiple jumpers. When I plugged in my 1.5 tb 3.5" drive the computer that gives me the S.M.A.R.T. error on the 2.5" drive, recognizes it with no problems. Any ideas on why this is happening and how I can fix it?

  Read the article

• Problem configuring virtual host.

  - by Zeeshan Rang

  I am tring to configure apache virtual host for my computer. But i am facing problem in doing so. i have made required changes in my C:\WINDOWS\system32\drivers\etc\hosts then C:\xampp\apache\conf\extra\httpd-vhosts.conf I added the following lines in httpd-vhosts.conf ########################Virtual Hosts Config below################## NameVirtualHost 127.0.0.1 <VirtualHost localhost> ServerName localhost DocumentRoot "C:\xampp\htdocs" DirectoryIndex index.php index.html <Directory "C:\xampp\htdocs"> AllowOverride All </Directory> </VirtualHost> <VirtualHost virtual.cloudse7en.com> ServerName virtual.cloudse7en.com DocumentRoot "C:\development\virtual.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost virtual.app.cloudse7en.com> ServerName virtual.app.cloudse7en.com DocumentRoot "C:\development\virtual.app.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.app.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> ######################################################################## I started my xampp and tried http://localhost in a browser. This works and open up http://localhost/xampp/ but when i try http:http://virtual.app.cloudse7en.com it again opens up http://virtual.app.cloudse7en.com/xampp/ I do not understand the reason. Also i have a windows vista 64 bit, operating system. Do i need to make some other changes too? Regards Zee

  Read the article

• SocketException (Timeout) only when running as scheduled task

  - by BVartin

  I'm running a C# web-scrapper application (that I wrote) on a Windows Server 2003 instance under a user belonging to the local Administrator group. When I run it within a desktop/remote-desktop session the application runs successfully but when I schedule it to run under the same user/security-context outside of the desktop session, all socket connections timeout. The scheduled task calls a batch file which in-turn calls the application. The Windows Server 2003 instance has a very basic configuration and isn't even connected to a domain. I cannot find anything in any firewall or security configuration which is preventing this but maybe I have overlooked something, can anyone be of any assistance? System.Net.WebException: Unable to connect to the remote server --- System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond X.X.X.X:443 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• How do I give a user permisson to view scheduled task history on Server 2008?

  - by pplrppl

  I've set up a scheduled task on Server 2008 and want to run it as a user other than the local administrator. So I choose a domain account created specifically for this task and once I've closed the scheduled task and entered a valid password I want to run it and look a the history tab for this task. On the history tab I see: The user account does not have permission to view task history on this computer. What permission must I grant to allow this user to view history and/or how can I view the history as a local admin/domain admin instead of the user the job will run under? Steps to hopefully reproduce: I'm starting from the "Server Manager" - Configuration - Task Scheduler - Task Scheduler Library. IN the top middle pane I have tasks that have been running for several months as the local administrator. In the process of troubleshooting another issue I changed the task to run as Domain\ABCuser. Later in the process of troubleshooting I tried unchecking "run with highest privileges". I have since changed the job back to SERVERNAME\Administrator but the history tab still showed the permissions message. I may have had multiple Server Manager windows open. After Closing the Server Manager and being sure no other management consoles were open I was able to reopen the Server Manager and see the History tab without error. At this point the task works properly but should I ever need to run a task as a task specific account I'd like to know how to make the history viewable. It may be something as simple as closing all Server Manger windows to allow cached permissions to be refreshed the next time you open the Manager but at this point I don't know exactly what the solution is.

  Read the article

< Previous Page | 848 849 850 851 852 853 854 855 856 857 858 859  | Next Page >