Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 858/1008 | < Previous Page | 854 855 856 857 858 859 860 861 862 863 864 865  | Next Page >

• Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

  - by cksubs

  Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

  Read the article

• trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

  - by Registered User

  Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

  Read the article

• Windows 7 Explorer keeps crashing

  - by Daniel Liang

  I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

  Read the article

• Affordable combined Ruby/Rails/Redmine + Subversion hosting?

  - by Pekka

  I'm a self employed web developer and after nine years of hard work, I'm looking to become a bit more "vagrant" starting next year, do some much-needed traveling and a bit and work off and on, making use of one of the greatest advantages of a programming job: The ability to work virtually from everywhere. For that, I am looking for a reliable hosting company I can entrust my code to in the form of a number of Subversion repositories, and an installation of the Redmine project management tool. As my financial situation may vary during traveling, I am looking for something I can pay up front for a year or two, and is obviously not too pricey. I don't care where the company is located, as long as it's trustworthy and solid, meaning it's not likely to go out of business next month. Does anybody know good recommendations? Preferably from own, personal, good experience. I have looked at CVSDude / Codesion and while they are certainly great, they don't offer Redmine of course, and seem to be aiming toward bigger organizations mainly. What I would need: 2-5 Gigs of space minimum, freely distributable between SVN, and Redmine attachments Unlimited number of Subversion projects Access control (team members / checkout-only accounts / etc.) I don't mind configuring the svn settings on file basis myself I need the possibility to map a custom domain to the package that is hosted elsewhere Frequent backups and access to those backups through FTP or other means I have been running my own virtual server for this until now, but I don't want the hassle, especially on the security side, while I may not always have the internet connection to fix problems that may come up.

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• Windows cannot open directory with too long name created by Linux

  - by Tim

  Hello! My laptop has two OSes: Windows 7 and Ubuntu 10.10. A partition of Windows 7 of format NTFS is mounted in Ubuntu. In Ubuntu, I created a directory under somehow deep path and with a long name for itself, specifically, the name for that directory is "a set of size-measurable subsets ie sigma algebra". Now in Windows, I cannot open the directory, which I guess is because of the name is too long, nor can I rename it. I was wondering if there is some way to access that directory under Windows? Better without changing the directory if possible, but will have to if necessary. Thanks and regards! Update: This is the output using "DIR /X" in cmd.exe, which does not shorten the directory name: F:\science\math\Foundations of mathematics\set theory\whether element of a set i s also a set\when element is set\when element sets are subsets of a universal se t\closed under some set operations\sigma algebra of sets>DIR /X Volume in drive F is Data Volume Serial Number is 0492-DD90 Directory of F:\science\math\Foundations of mathematics\set theory\whether elem ent of a set is also a set\when element is set\when element sets are subsets of a universal set\closed under some set operations\sigma algebra of sets 03/14/2011 10:43 AM <DIR> . 03/14/2011 10:43 AM <DIR> .. 03/08/2011 10:09 AM <DIR> a set of size-measurable sub sets ie sigma algebra 02/12/2011 04:08 AM <DIR> example 02/17/2011 12:30 PM <DIR> general 03/13/2011 02:28 PM <DIR> mapping from sigma algebra t o R or C i.e. measure 02/12/2011 04:10 AM <DIR> msbl mapping from general ms bl space to Borel msbl R or C 02/12/2011 04:10 AM 4,928 new file~ 03/14/2011 10:42 AM <DIR> temp 03/02/2011 10:58 AM <DIR> with Cartesian product of se ts 1 File(s) 4,928 bytes 9 Dir(s) 39,509,340,160 bytes free

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• Notebook Operating System with extreme support cycles/security updates

  - by leto

  Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

  Read the article

• Windows Server 08 R2 file share File locking, OSX clients

  - by Keith Loughnane

  I've spent the last two weeks banging my head against this wall. I think I'm starting to understand the problem though. I manage a design company and they have 5 macs (OSX 10.5/.6/.7) connected over SMB to a Windows 2008 R2 file server, another machine functions as Domain Controller (that might not matter). All the macs can connect ok, no issues finding the server or logging in. For the most part things are ok. The problem is files locking up. I thought it was a permissions issue at first but it seems to be file locking. The users open a file; .ind, .pdf etc the file opens, the software reads it and closes it. That's fine, but the folder above the folder locks, it can't be moved and it can't be renamed. Eg: /Working/Project01/Imagefiles/image.pdf /Finished/ The user opens image.pdf, closes it and wants to move the whole Project01 folder into Finished. It gives a username/pass dialogue and then does nothing, no error, or just does nothing. Trying to rename gives a dialogue that says you don't have permission. It looks like it's looking for permission locally, which is why I spent about a week looking at that. Eventually I found that Finder on the macs seems to be keeping the folders open. I can work around it by Killing finder, remounting the shared drive or closing the file through the server manager but this just proves the theory it's not a solution. Has anyone dealt with this problem?

  Read the article

• Is there a realiable way to troubleshoot wake up from sleep in Windows?

  - by Borek

  Is there a reliable way to troubleshoot laptop wakes? I've seen "heuristics" posted here and there but isn't there really a simple and deterministic way to tell what's causing a problem? Specifically, my laptop wakes up about every hour for about 2 minutes. Exported event log entries are here: http://www.mediafire.com/?abcqb00v5wyo6pj. I've tried: powercfg -devicequery wake_armed Empty result set. Scheduled tasks - the main ones are not scheduled to run every hour. When go through a long list of all possible tasks, there are some that are set to be triggered every hour (e.g., MS "RacTask" whatever it is). But when I go to power options, Advanced settings, Sleep, Allow wake timers it is set to "Disable". Also, the specific task is not set to wake the computer if necessary. Power options for my Ethernet card don't enable it to wake the computer - the cable is disconnected anyway. There are no other HW devices attached - no USB disks, no keyboards / mice etc. I am really clueless and quite unhappy that it's so hard to troubleshoot this situation.

  Read the article

• Recovering a mdadm+lvm+ext4 partition with read error

  - by bitwelder

  One of disks in my NAS has failed. The NAS is running Linux, and it uses mdadm + LVM technology for its filesystems. I do have backup for most of the contents, but not for the very last changes, and if possible, I'd like to recover that from this failing disk. The disk (a 'green drive' WD10EARS 1TB in size) throws this kind of errors: Oct 3 12:00:41 kernel: [ 3625.620000] ata5.00: read unc at 9453282 Oct 3 12:00:41 kernel: [ 3625.620000] lba 9453282 start 9453280 end 1953511007 Oct 3 12:00:41 kernel: [ 3625.620000] sde5 auto_remap 0 Oct 3 12:00:41 kernel: [ 3625.630000] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 Oct 3 12:00:41 kernel: [ 3625.630000] ata5.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable Oct 3 12:00:41 kernel: [ 3625.640000] ata5.00: failed command: READ FPDMA QUEUED Oct 3 12:00:41 kernel: [ 3625.650000] ata5.00: cmd 60/40:00:e0:3e:90/00:00:00:00:00/40 tag 0 ncq 32768 in Oct 3 12:00:41 kernel: [ 3625.650000] res 41/40:00:e2:3e:90/12:00:00:00:00/40 Emask 0x409 (media error) <F> Oct 3 12:00:41 kernel: [ 3625.660000] ata5.00: status: { DRDY ERR } However, while testing with 'dd', I noticed that if I skip the first 4kB, the read seems to be ok, i.e. a command like. dd if=/dev/sde5 of=dev/null bs=4k count=1000 skip=1 doesn't return any read error. Supposing that there is no other read failure in the rest of the disk, would I be able to recover this 900 GB partition (as I mentioned before, it's a 'linux raid autodetect' partition, that contains a a LVM2 volume that contains a ext4 filesystem) if I copy-clone the partition somewhere else, but the first 4kB?

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• Time-Machine backup over SSH tunnel to NFS mount

  - by BTZ

  I've recently started using a new NAS which runs CentOS 6.2. One of the purposes of the NAS would be to serve as a backup target. Whilst I have been using Apple's Time-Machine for a while and I am very satisfied with it, I'd like to continue using it. Backing up directly to an address in my network is no hassle; all works fine. For security reasons I'd like all my traffic to go through an ssh tunnel to the NAS. This way I can avoid needing to get a VPNserver (for personal reasons). As of NFSv4 the NFS deamon is bound to port 2049, which makes it easy for me to direct all traffic through a ssh tunnel. Tunnel: ssh -f admin@ms -L 2000:localhost:2049 -N Mount: mount -t nfs -o nfsvers=4,rw,proto=tcp,sync,intr,hard,timeo=600,retrans=10,wsize=32768,rsize=32768,port=2000 localhost:/mac_backup /Volumes/backup This works fine for Finder/terminal and throughput is almost equal to direct traffic. (CPU of the NAS does ride high when I reach max bandwidth though) Now the problem: With Time-Machine I can't use the NFS mount point mounted on localhost. TM seems to try to connect to it and then give me a "OSStatus error 65". I also tried using NFSv3 (I correctly forwarded all ports) with no luck. Can anyone shed a light on this and/or give a solution?

  Read the article

• On what should i not be pennywise buying a machine for SqlServer 2008?

  - by Michel

  Hi, i'm going to do a project for a client and i'll be hosting the database server myself. Normally it would be on my dev machine, but there will also be data pushed into it during developing and testing, so i would like to setup a dedicated test sql server. But, as you might guess, i can't afford to go to Dell and buy one mega 16 core 16 GIG 10 TB raid 5 machine (wow, that sounds cool) So i have to save the money somewhere... the hardware only has to live for a year (longer is nice of course), and the sql server won't be hit too hard: i guess the average server will only see it as a cough once in a while. But i do want the machine to be a bit performant: if it does get some data, it must be a bit responsive. So my question is were can i leave out the expensive parts: is 2 GB enough, or must i take 4GB, is an average processor enough or should it be a top of the bill? Is Sql server a large resource user or is a simple desktop pc good enough? It wil run on win2008 by the way.

  Read the article

• PHP displays blank white page even with all error reporting enabled

  - by Andy Shinn

  I am trying to debug a broken page in a Drupal application and am having a hard time getting PHP to spit anything useful out. I have the following set: error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On error_log = /var/log/php/php_error.log I have a file showing me phpinfo() which confirms these variables are set correctly for the environment. I have increased memory_limit to 256M (which should be more than enough). Yet, the only indication I get is a status 500 code in the apache access log and a blank white page from PHP. The Apache virtual host has LogLevel set to debug and the error log only outputs: [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 0 to 2 : URL /index.php, referer: http://ec2-174-129-192-237.compute-1.amazonaws.com/admin/reports/updates [Sat Jun 16 20:03:03 2012] [error] [client 173.8.175.217] File does not exist: /var/www/favicon.ico [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 42 to 44 : URL /favicon.ico The PHP error log outputs nothing at all. kernel and syslog show nothing related to Apache or PHP. I have also tried installing suphp and checking its log just confirms the user is executing correctly: [Sat Jun 16 20:02:59 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 [Sat Jun 16 20:05:03 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 This is on Ubuntu 12.04 x86_64 with the following PHP modules: ii php5 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (metapackage) ii php5-cgi 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (CGI binary) ii php5-cli 5.3.10-1ubuntu3.1 command-line interpreter for the php5 scripting language ii php5-common 5.3.10-1ubuntu3.1 Common files for packages built from the php5 source ii php5-curl 5.3.10-1ubuntu3.1 CURL module for php5 ii php5-gd 5.3.10-1ubuntu3.1 GD module for php5 ii php5-mysql 5.3.10-1ubuntu3.1 MySQL module for php5 So, what am I missing here? Why no error reporting?

  Read the article

• 2011 i7 Macbook Pro unable to boot from any Windows CD?

  - by Craig Otis

  I'm encountering issues installing Windows alongside my Lion install. I'm attempting to install from the internal SuperDrive, after using Boot Camp to partition what was a single, HFS+ volume. When holding down Option at boot, the CD appears in the startup list, but upon selecting it, I get a gray screen for 5 minutes, then a flashing white folder. I tried installing rEFIt and using this to boot the CD, but I receive an error about "Not Found" being returned from the "LocateDevicePath", and a mention of the firmware not supporting booting using legacy methods. In the Console, when opening the StartupDisk preference pane (which never presents the CD as a selectable option), I see: 11/25/11 4:39:31.159 PM System Preferences: isCDROM: 0 isDVDROM:1 11/25/11 4:39:31.159 PM System Preferences: mountable disk appeared: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.214 PM System Preferences: - So far so good, passing disk to System Searcher. 11/25/11 4:39:33.218 PM System Preferences: OSXCheck: No boot.efi in System Folder or volume root. 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD I'm at a loss here. I've done my research, but it sounds like most of the rEFIt errors of this nature are caused by installing from a thumbdrive, or an external drive. I'm using the internal SuperDrive. Also, I've tried this with two different disks: A Windows XP SP2 CD A Windows 7 x86 DVD Both are disks I've had around for years, and I've used them reliably in the past. The system is an early 2011 15" Macbook Pro, all firmware updates installed.

  Read the article

• Weird File Corruption

  - by Viet Norm

  My Windows 8 broke few days ago and I had to reinstall it (see Can't boot Windows 8). Afterwards, I found some corrupt files on C drive. Ok, it happens, but this is really weird. Corrupt files seem to contain stuff from Windows registry. For example, this is beginning of one of the corrupt files: hbin ` PÿÿÿT h i s z o n e c o n t a i n s w e b s i t e s t h a t y o u t r u s t n o t t o d a m a g e y o u r c o m p u t e r o r y o u r f i l e s ... I googled and found that 'hbin' often refers to "hive bin" of Windows registry. Then I searched the registry for the readable part of corrupt data, and found the text in some registry value (not the text above, but something I found in another corrupt file. I'm assuming the above is also from registry). My question is, how could this happen? Was it a virus, or did Windows somehow corrupt these files while attempting to repair itself?

  Read the article

• How to create Windows Vista/Windows 7 Startup disk or Rescue disk or system restore points on a CD?

  - by goldenmean

  Hello, I have two laptops, one having Windows-Vista home premium and other one having Windows-7 professional. Both versions of OS are OEM installs(pre-installed when I bought the laptop) and I do not have the Windows Installation disks for them. usually the installation disks provide a repair option in case one needs to repair/rescue a improper windows installation. But since I dont have the installation disks, I want to create rescue disks/startup disks for these. My questions are : 1] How to create a system rescue disk/startup disk on a CD from these two versions of Windows? 2] Doesn't the system restore points which Vista/Windows-7 create, cannot be created on a CD disk instead of hard-disk? 3] If I have a manual backup of my windows registry, in which I have exported all the registry to a file and I have that file on a CD, how to restore that registry back to the windows installation which might not be booting up properly due to bad registry problem. EDIT: 4]Is there any way to use these system restore points directly during bootup of the laptop, if windows does cannot boot properly due to problem. First laptop is HP Pavillion dv6646 and second one is Sony VAIO VCPEE series. thank you. -AD

  Read the article

• Subdocument in Word won't save

  - by ChrisW

  Because I know Word has a history of not liking very large documents (my supervisor specifically told me not to use LaTeX... grr), I decided to learn the Master document / subdocument feature of Word when writing my PhD thesis. I have the title page / table of contents etc in the master document, and each chapter as a separate document. However, when I save the master document, it appears to save all the chapter documents apart from one (Chapter 4), for which it brings up the Save Document dialog box, helpfully with "Chapter4.docx" in the "Save as" box (n.b. Chpater4.dox is not open). Clicking save does nothing, and doesn't make the dialog box go away. Saving as a different document means that my changes aren't reflected in the same document. There must be some reason Word doesn't like this particular document but I've got no idea why - there's nothing special in it that isn't in any of the other chapters. I have tried closing all documents, renaming Chapter4.docx, opening the master document, expanding all documents, OKing the warning that Chapter4.dox does not exist, and inserting the 'new' document, but even when I save the master document it still won't save the new Chapter4 document. If anyone knows any reason why Word is acting like this (or if I'm doing anything stupid), I'll be eternally grateful (p.s. sorry for the long rambling message. It's late; I've been working on my PhD 4.5 years, I really really want to throw this computer out the window, and I hope people are kind enough not to downvote this question because of it's rambling nature!) Update With Word closed, I've tried to delete Chapter4.docx (having made a backup!) - but I get a warning that it can't be deleted because it's open in Microsoft Word... these files are on a network drive and the same problems are happening on 2 different computers. I could login to the filestore through ssh and force the file to be deleted, but I'm curious to know why this is happening!

  Read the article

• Understanding how IE's SmartScreen works

  - by Kevin Donn

  Today I downloaded an update to our mail server on my dev machine using IE9 on Win7 Pro. I directed IE to save the file on our server's shared drive so I could install it later. When the download finished, IE showed a red banner at the bottom and said that, ".exe is not commonly downloaded and could harm your computer." There were three buttons, "Delete", "Actions", and "View downloads". I selected "Actions" just because I had never seen this before. It showed a "SmartScreen Filter" dialog basically giving three choices: "Don't run this program (recommended)", "Delete program", and "Run anyway". I just canceled the dialog because I didn't want to run it in the first place; I just wanted to download it so I could run it later on the server. So when I did try to run it, it would blow up immediately saying, "Setup was unable to create the directory - Error 5: Access is denied." I tried unblocking the file, "Run as Administrator" even though I already was Administrator, turning off UAC, etc. Cutting to the chase, I finally downloaded the file again, ran WinMerge on the two and it showed they were identical, except the new one ran fine. I went back to my dev machine, downloaded the file through Firefox and then ran it on the server, again fine. But when I tried again through IE, again SmartScreen showed its red banner and somehow clobbered the file even though it was stored on another machine, and WinMerge can't tell the difference between it and a good file. I've looked around on the web for how SmartScreen works, but they all give user-level descriptions of it. What I want to know is, what does it do to that file to make it unrunnable on another machine? Thanks

  Read the article

• Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most

  - by Henno

  Problem Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most. Topology Facts ESXi5 version is 5.0.0.504890 VM has the latest Vmware Tools installed VM is using E1000 network driver Physical box has Win Srv 2008 R2 as the OS CrystalDiskMark says the drive on physical box can read/write 100MB/s vCenter is another vm on esx both vm and physical box are showing 1Gbps link speed Configuration Networking shows vmnic0 as 1000 Full NTttcp is a client/server tool from Microsoft for measuring pure network throughput Here's what I've done so far: Test1: VM is running Filezilla FTP Server (default settings, one user account made) Physical box is running Filezilla FTP Client (default settings) Physical box is uploading a big file to FTP server Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Physical box is downloading that file from FTP server Transfer speed (as observed by Windows Task Manager on both machines): still ~11MB/s (bad) Could it be disk performance issue? Test2: Physical box is running ntttcpr.exe -a 6 -m 6,0,VM_IP_ADDRESS VM is running ntttcps.exe -a 6 -m 6,0,PHY_BOX_IP_ADDRESS Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Could it be switch performance issue? Test3: physical box is running vSphere Client I open Summary Storage datastore Browse Datastore... from physical box and upload a file to datastore Transfer speed (as observed by Windows Task Manager on physical box): ~26-36MB/s (good) Could it be a vm specific issue? Test4: Installed ntttcp to another vm on the same esx server Measured network performance between vms on the same esx server with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~90-120MB/s (excellent :) Test5: I have another esx server on the same site, connecting to the same datastore and same switch. Those two ESX servers have both 2 NICs. One NIC goes to switch while the other goes directly to the other ESX server. vMotioned one of the testing vms off to the other ESX host Measured network performance between vms on different esx servers with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~11MB/s (bad) While I'm aware of these: ESXi 4.1 slow file transfer ESXi 5 network performance is slow Debian Etch and ESXi slow network speeds VMWare ESXi slow file copy to guest they did not help (or I must have been missed something)

  Read the article

• Samsung laptop randomly shuts down

  - by Dmatig

  I've rewritten this question because it turned into an indecipherable mess. I have a Samsung R560 laptop that is overheating, and shutting itself down under load consistantly. Thank you quickcel for reccomending me Speedfan to monitor my temps. Here they are (Load / Idle): (Ignore "Temp1 and Temp2", whatever sensors they are they'd always random, pretty sure they're broke). The load temperature is after just 5 minites of playing Fallout 3 - another 5 minutes and it (the GPU - 9600M GS) consistantly breaches the mid 90's then shuts down, so it's hard to get a good picture of it. I'm looking for some solution or way to decrease these temperatures, because they seem far too high even idle. I've tried: Opening up the case and clearing of all dust with compressed air. Updating drivers for my Graphics card Have purchased and am using a notebook cooler I don't want to: Undervolt / underclock (defeats the point of having a more expensive card) Use lower power / performance settings (again, i might as well have bought something cheaper) Is there anything else i can try (software or inexpensive hardware) that can help me fix this? Has anybody had a Samsung laptop and knows if this can be sorted under my warranty, and the turnaround time of sending it off (UK?)(it has always ran hotter than it should, but now at 6 months old is getting hot enough to power off)

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• Building a computer for the first time from scratch - will this really work?

  - by Nike

  Hey there. I'm building my own computer, and i just finished picking out all of my parts. Now i just want to be sure it'll all work before i order it. I'm mean specifically if the RAM & Graphic card will fit on the motherboard i chose. Below is a list of all parts. I'm sorry, i selected the parts from a Swedish website so it might be hard to understand some parts. Google Translate will help ;) I really appreciate any help/suggestions. Thanks in advance! :) Oh, and here's the parts i mentioned: EDIT: As i'm not allowed to post more than one link here, i'll just link to my homepage: http://nike1.se/c/ I know i didn't choose the most expensive parts, but this won't be my primary computer. I'm only going to use this one for testing purpose, if that makes any sense. I'm sorry for my english, i'm just so tired now. Haha! Once again, thanks in advance! :)

  Read the article

< Previous Page | 854 855 856 857 858 859 860 861 862 863 864 865  | Next Page >