Search Results

Search found 34141 results on 1366 pages for 'even mien'.

Page 87/1366 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• Why does eth0 show an IP if I'm booting into runlevel 1?

  - by banjer

  I'm having some issues with networking on a new Linux server I'm building. The OS is SLES 11. When booting into runlevel 1, I see that eth0 is showing an IP. Physically, there is a network cable plugged into the card associated with eth1, and then there is a network cable plugged into a QLogic iSCSI card (eth4, not shown). I've been troubleshooting this for awhile, and it seems like eth0 is somehow getting assigned an IP, even though it isn't configured in Linux or even plugged into the network for that matter. Thoughts? ifconfig -a Here is the ifconfig output (Sorry, I need more rep before I can post images on SF...)

  Read the article

• Serve up PC hard drive as USB mass storage

  - by sheepsimulator

  Is there a software package available that can serve up a hard-drive internal to a PC and make it available over USB to other USB Master nodes as mass storage? Ex: take your C: or /dev/hda drive on a PC (let's call the computer PC-A), and run a driver program which makes your C: or /dev/hda drive available to external devices as USB mass storage. When you'd hook up another PC (PC-B) to PC-A via USB, it would detect a USB mass storage device, which is C: or /dev/hda on PC-A. Is this even possible? EDIT: I know that there are other ways of making data on a drive available between two different computers (eg. putting PC-A's hdd in a USB-drive-enclosure, or having PC-A make the hdd available via a network share). But I'd like to know if the method that I describe above is even technically possible.

  Read the article

• General video performance affected on Mac OSX 10.5 (PowerBook G4)

  - by r0ca

  Hi all, I'm quite new to Mac and I just got a PowerBook G4 for free. I installed OSX 10.5 on it and for the first two weeks, everything was going kinda smooth even if this is similar to a P3. I'm not expecting awsome video performance but at least be able to watch some videos from Youtube. Yesterday night, I installed Office 2008 for mac and this morning, even after a reboot, my computer is way much slower that I used to know. I watched a youtube video and the framerate was 1:1. I also noticed it on flash adds, it's way slower! Is there anything that I can do to increase video performance, see what's the process list running and taking more GPU or CPU, what's taking more ram and stuff like that?! What do you guys, Mac pros, would do on an old laptop with OSX 10.5 Thanks!

  Read the article

• Flushing disk cache for performance benchmarks?

  - by Ido Hadanny

  I'm doing some performance benchmark on some heavy SQL script running on postgres 8.4 on a ubuntu box (natty). I'm experiencing some pretty un-stable performance, even though I'm supposed to be the only one running on the machine (the same script on the exact same data might run in 20m and then 40m for no specific reason). So, remembering my distant DBA training, I decided I should flush the postgres cache, using sudo /etc/init.d/postgresql restart, but it's still shaky! My question: maybe I'm missing some caches in my disk/os? I'm using a netapp appliance as my storage. Am I on the right track? Do I even want to make sure I get repeatable performance before I start tuning?

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• backing up a virtual machine

  - by ErocM

  I inquired with the support of justcloud.com telling them that I have a vmware vm that I was wondering if it could be backed up while in use. I can back up the vm once it is shut down but I was wondering if their "shadow copy" would back it up while running. This was their response: Thank you for your email. I am really very sorry but virtual machines can't be backed up for a simple reason that they are virtual, they have virtual memory, not physical memory. Please let me know if there is anything else I can help with. Kind Regards, Barry James User Experience Team www.justcloud.com These are physical files so I wasn't sure I even understood the response. Am I wrong in thinking that a vm can be backed up while in use? Does this response even make sense? I need a cheap alternative to backing up the vm off the server in case it goes down. Any suggestions?

  Read the article

• Word 2007 Question

  - by Lijo

  Hi Team, While preparing a Word 2007 document, I made a mistake. (Not to say I don't have any other copy of the document) While formatting (as a try) I applied the style "Apply Style to Body to match selection". This caused the document to go totally in a wronfg format - having numbers even in tables. Have you ever faced this? Could you please tell how to correct it? Hope you would be kind enough to answer this even though it is not striclty technical. Thanks Lijo

  Read the article

• How would I / could I obtain an reasonably comprehensive list of domain names?

  - by Simon

  I know that domain names are constantly changing, and I know there are a lot of them, but there is clearly a region of the domain name space which is stable. How would I go about getting a list, even a very big one? Such a thing must logically exist, even if it is in a distributed form, because the web's DNS servers resolve names to IP addresses. So in theory if I could poll all the DNS servers in the world at a moment in time I would have the complete list of mapped names. Is there a practical way of doing that? As an aside, does anyone have any good estimates of how many domain names exist at the moment?

  Read the article

• Who moved this PC here aka Locate which port on switch a PC is plugged into

  - by ggonsalv

  The catch is you have no SNMP access, not even public. The end vision is locate a PC in building easily even if PC's are moved around. The MAC address of the PC is known and the software would run as client on each desktop, reporting back which port the PC was plugged into. Well from a programmer perspective, my network skills are not the best. Yes I could use SNMP, download the MAC port table, load it into SQL, match it to the PC name. Seems alot of work. Lets say I ping a single point from the PC. Would the echo have some thing unique for each device on the same switch? All I need to identify some thing unique for each PC plugged into each port. If the PC was moved from location A to a different location then the unique response would change.

  Read the article

• Disable Acer eRecovery system

  - by Joel Coehoorn

  The meat of this question is that I'm looking for a way to either require a password before using a recovery partition or "break" the recovery partition (specifically, Acer eRecovery) in a way that I can later "unbreak" only by booting normally into windows first. Here's the full details: I have a set of new Acer Veriton n260g machines in a computer lab. A lot work went into setting up this lab to work well - for example, Office 2007 and other programs needed by the students were installed, all windows updates are applied, and a default desktop is setup. All in all it's several hours work to fully set up one machine. Unfortunately, I don't currently have the ability to easily image these machines, and even if I did I would want to avoid downtime even while an image is restored. Therefore, I've taken steps to lock them down — namely DeepFreeze and a bios password to prevent booting from anywhere but the frozen hard drive. DeepFreeze is an amazing product — as long as you boot from the frozen hard drive, there is no way to actually make permanent changes to that hard drive. Anything you do is wiped after the machine restarts. It lets me give students the leeway to do what they want on lab computers without worrying about them breaking something. The problem is that even with the bios locked and set to only boot from the hard drive, these Acers still have a simple way to choose a different boot source: shut them down and put a paper click in a little hole at the top while you turn it on again. This puts them into the "Acer eRecovery" mode. This by itself is no big deal — you can still power cycle with no impact. But if you then click through the menu to reset the machine (we're now past the point of curiosity and on to intent) it will wipe the hard drive and restore it to the original state. Of course, a few students have already figured this out and reset a couple machines. That's unfortunate, but inevitable. I don't want to destroy the ability to do this entirely (which I could by repartitioning the drives to remove the recovery partition) but I would like a way to require a password first, or "break" the recovery system in a way that I can "unbreak" only if I first un-freeze the hard drive in DeepFreeze. Any ideas?

  Read the article

• Cheap windows shared hosting service

  - by Elangovan

  Hi I have recently purchased a domain from go daddy, now I am looking for a cheap windows hosting. Following are my requirements Shared Windows hosting Should be cheap in price Should have at least one SQL server Db and one mysql db. Should support atleast asp.net 3.5 and php Will be good if it has support for asp.net mvc (no problem even if it is not available also) Should be able to install third party blog sites. Bandwidth, total space and performance are not very important. Silverlight is also an added advantage (no problem even if it is not available also). There should be no advertisement or banner added by the hosting company in the site. Should have support for subdomains

  Read the article

• IE8 Compatibility View issues

  - by 08Hawkeye

  I have the IE7 emulater tag in a jsp layout. But when I bring up the page, it defaults to the IE8 view until the user clicks the Compatibility View button. I don't want the user to have to click the button to launch compatibility mode. Is there a way to force IE7 Emulation on pageLoad? I'd even like to disable the button (or any potential to toggle between IE8 standard mode/IE7 view). Thanks! //sw Update: Now the button seems to have disappeared entirely, but still defaults to IE8 standards. Where did it go?! The toolbar context menu has it as selected, but the tools dropdown menu has it grayed out. For my purposes, it is unacceptable for the user to have to use the developer tools or even click the button to trigger emulation, but I don't know why the button disappeared anyway...

  Read the article

• Fonts doesn't render in Chrome or IE in Windows Server 2008

  - by Martin Carlsson

  When I visit, for example, http://www.bolagsverket.se from a user account on this Windows 2008 Server, Chrome displays the site but all the text is gone. When I try in IE it's even worse, it doesn't even load the page, I jsut end up with this: http://dl.pixelstore.se/image/0y1f0y0w1J39 The fonts used for this site is (from CSS): font-family:Frutiger,Frutiger Linotype,Univers,DejaVu Sans Condensed,Liberation Sans,Nimbus Sans L,Geneva,Helvetica Neue,Helvetica,Arial,Tahoma,sans-serif If I edit the CSS through Chrome Developer Tools, and erase all fonts until Arial it suddenly works. The strange thing is that everything works fine from the administrator account, it's just (all) the user accounts that doesn't work. My guess is that Chrome/IE is asking for the fonts but somehow they are restricted in the user account. Instead of just ignoring the fonts they can't find they try to render them anyway. Any clue?

  Read the article

• Any reason not to disable the Windows pagefile given enough physical RAM?

  - by Evgeny

  The question of disabling the Windows pagefile has already been discussed quite a bit, for example here and here and here. People continue to upvote answers that say "you should not disable your pagefile even if you have plenty of RAM", but I have yet to see any concrete, verifiable reasons being given for this advice. As far as I can see, if you never need to read from the pagefile (because you have enough RAM) then performance could only be worse with it enabled due to Windows pre-emptively writing to it. At best, performance would be the same. I can't see how it could possibly be improved by writing data you never need to read. So my question is: Assuming that I have enough physical RAM for everything I do, is there any reason I should not disable the pagefile? Let's say the version of Windows is Windows XP x64 SP2 or Windows Server 2003 x64 SP2 (same thing). If it's different for Windows Server 2008 x64 I'd be interested to hear an answer for that as well. I'm looking for specific, objective reasons from good sources, not just opinions. Something like "here are the benchmarks done with and without a pagefile and the results were better with a pagefile, even with enough RAM" or "according to this MS KB article problem X occurs if you disable the pagefile". So far the only reasons I've seen mentioned are: Even if you think you have enough RAM you might run out. OK, but for the purposes of this question, let's just take it as a given that I have enough. Maybe I only ever read my email and I have 16GB RAM. Or 128GB. Or 1TB. Or whatever - but it's enough for 100% of what I do, 100% of the time. Another way to think of it is: if I have x MB physical RAM and y MB pagefile and I never run out of RAM in that configuration, would I not be better off, performance-wise, with x+y MB physical RAM and no pagefile? Windows is "used to" having a paging file and it might not function as reliably (from Understanding the Impact of RAM on Overall System Performance That's rather vague and I find it hard to believe, given that MS has provided the option to disable the pagefile. Windows knows what it's doing better than you. No - it doesn't know that I won't run more programs or load more data, but I do.

  Read the article

• how to rotate one squid user among multiple IPs based on number of requests processed by each IP

  - by Arvind

  I want to set up a Squid ACL in the following manner-- For example, my Squid Proxy Server has 10 IP addresses- now I have a user 'demouser'. I want that for the very first request sent to 'demouser' this user uses IP address #1, for the second request it uses IP address #2, for the 3rd request of the day it uses IP address #3 and so on till it uses up all IPs. One more level of control I would like is that once the user has used up all available IP addresses once per address, then it does not allow the proxy request to go through. How do I set up such a configuration on Squid Proxy server ACL? Even a document or how to would be very helpful. The official wiki talks about one 'weird' case- choosing an IP address based on time of day the request was made to the proxy server. The other cases are all regular use cases which are not even remotely near my requirement as specified above.

  Read the article

• Autocorrect for "fat fingers" - MS Word

  - by Jamie Bull

  I'm wondering if anyone knows of a plug-in for MS Word which can handle key-presses of surrounding keys when typing at speed (rather like iPhone or Android autocorrect)? My use case is in transcribing interviews where I need to type quickly (even with the playback at half speed) - but I don't do this often enough to become a proficient touch typist. I will also be paying close attention to the text produced in subsequent analysis so I have a reasonable expectation that I'll catch any "hilarious" autocorrect errors. Any pointers to plug-ins which work at either a system level or within MS Word would be great. Even in an open source word processor at a pinch, though I'd miss the MS Word environment and my macros. Thanks.

  Read the article

• Music but no voices on headphones

  - by TheEmeritus

  I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

  Read the article

• this operation has been canceled due to restrictions in effect on this computer

  - by Dan

  I have this HUGELY irritating problem on Windows 7 (x64). Whenever I click on ANY link (that exists on a Word document, excel or Outlook), I get an alert box with the message: "This operation has been canceled due to restrictions in effect on this computer" I have been scouring my settings and the internet for a solution, but to no avail. Has anybody else encounted this problem? It even happens when I click anchors in word documents i.e. I can't even click on an entry in a Table of Contents to go to the appropriate page - I get this same error then. Is this a Windows 7 thing? Anyway to turn this off?

  Read the article

• Black stripe appears to the right of the screen, impossible to get rid of

  - by Gabriele Cirulli

  After clicking the "Auto Config" button on my Acer AL2216w screen a stripe appeared on the right of the screen where the screen doesn't "exist" and I can't seem to take the screen viewport back even by using the OCD setting and moving it to the right. The left part of the screen is also hidden and I'm not able to see what's going on there. The PC is connected to the screen through a DVI adapter and a VGA cable. I also use multiple monitors and this is the second monitor. Anyway this seems not to be a related issue, as this used to happen even when I only had a single monitor. I managed to fix this issue once but it was more than two years ago and I can't remember what I did, and out of all of the things I've tried so far (connecting the screen to another PC and performing auto adjustment, switching the cables, etc.) none worked. Here's how it looks: Can anyone help me fix this?

  Read the article

• How can I send an email from Mail.app to Outlook with an attachment that does not embed into the email body?

  - by JAG2007

  I'm using Mail.app (on Mac OS X 10.6) and when I send an email to users on PC Outlook, with an attached image, they get the email as an image embedded into the body, not as an attachement. I even tried clicking "view as icon" before sending the attachment from Macmail, but that made no difference. I also tried this myself, sending from Mail.app over to my PC's Outlook, and I do get that same problem. In Outlook the image is not coming through as an attachment, but as an image embedded into the body of the email. The reason this is an issue primarily is because the user is then unable to click "save as" and has to actually copy and paste it into some other program, which means the file is converted from jpg or png to the bmp format. But beyond that, most of my recipients don't even know how to copy and paste it into another program to save it that way anyway. They need the "save attachment as" functionality.

  Read the article

• Wireless is not currently enabled

  - by ikartik90

  I have a HP Pavilion TX2000 tablet PC with me with windows 7 OS running on it. I used to access the Internet using my D-Link DIR 615 wireless adapter on the tablet and it used to work quite fine until one day, when I hibernated my Windows 7, the wireless went off and the problem seems to persist even after my hard efforts to clear it. I checked if the router works fine, and yes it did as my iPod was still catching wireless signals on the other hand, when I checked mu device manager, I realized that I now had no wireless driver. I checked on HP's website for one, but ironically even they didn't have wireless drivers meant for my tablet for Windows 7. Please help me find a solution to this problem. Further queries will be entertained as frequently as possible. Thanks.

  Read the article

• W3 Total Cache or WP Super Cache?

  - by javipas

  I'm just preparing the setup of a new VPS where I will migrate a WordPress blog with a good traffic (currently, around 40k pageviews a day), and I was thinking about the caching strategy. I've found different ideas and recommendations, but from previous experiences I will setup a Nginx+PHP-FPM+MySQL (LEMP) system on a Linode VPS. I've read also about setting Nginx as a reverse proxy with Apache, and even using Varnish too, but I don't know if all of this can benefit the speed/performance of the blog (that's the only thing that will be installed on the VPS). The question now is... would you recommend W3 Total Cache or WP Super Cache? I've used W3 on some blogs, but I haven't noticed great benefits and don't need all its options, so I think I could give the veteran WP Super Cache a try. Besides, some users have complained about W3 complex configuration and lack of performance (even consumig more CPU) on some cases.

  Read the article

• Processor not running at max speed

  - by Andrew Hampton

  My laptop has an Intel Core 2 Duo T9300 which should be running at 2.5GHz, however CPU-Z consistently reports my Core speed at right under 1.6Ghz (8x multiplier and ~200MHz Bus Speed). Even when I'm doing heavy development work and the processor is running at 100% for extended periods of time the core speed reported by CPU-Z never goes up to 2.5GHz. My understanding is that this reduction in speed is to save power, but this happens even when I'm plugged into the outlet. Does anyone know why this is happening or how to fix it?

  Read the article

• Simultaneous read/write to RAID array slows server to a crawl

  - by Jeff Leyser

  Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

  Read the article

• Folder Size Column on Explorer on Windows Vista/Seven

  - by Click Ok

  I'm a big fan of FolderSize, but unfortunately it works only on Windows XP. Even reading this and this, I'm not convinced that I cannot to have a column showing the folder size on Windows Explorer. Even with all "problems" FolderSize worked like a charm in WindowsXP. In a sysadmin life, FolderSize is explendid. Before select a lot of folders to send to backup in DVDs, I can check directly in Windows Explorer the size of the folders and get a set of folders with 4.3Gb to burn in a DVD. In another situation, I can view in the root folder the size of the bigger folders in the hard drive and start a good strategy of backup/partitioning/transfer to another drive/etc. If desired, I can tell a lot of another needs that in my sysadmin life I need a tool like FolderSize... There is someone that is actively developing a solution to show folder size on Windows Explorer in Vista/Seven Windows? What the problems that I can face if I develop myself that "add-in" for Windows Explorer?

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >