Search Results

Search found 32598 results on 1304 pages for 'ubuntu touch'.

Page 874/1304 | < Previous Page | 870 871 872 873 874 875 876 877 878 879 880 881  | Next Page >

• Error on restarting networking :SIOCSIFFLAGS

  - by Paddington

  I have a sever with 2 network cards, an internal IP on one card (eth0) and external IPs (aliased) on the other card (eth1). I lost connection the public network and I tried to restart networking with /etc/init.d/networking restart and got the error "SIOCSIFFLAGS: cannot assing requested IP and Failed to bring up eth1". I even added the IPs in the interfaces file but still got an error on restarting. I could not ping my default gateway. A work around was to add ifconfig eth 0 x.x.x.x route -add default gw x.x.x.z I could then connect to the public network. What could be the issue here?

  Read the article

• Setting environment variables when executing Eclipse via Unity launcher icon

  - by Nullptr

  My question is a followup for the following: How to pin Eclipse to the Unity launcher? I created Eclipse's icon to the Unity launcher based on the selected answer at the above link. However, when I launch Eclipse via this icon, the environment variables are not properly set. I need to call . /opt/intel/bin/compilervars.sh intel64 to use Intel compiler tools in Eclipse. However, launching via the icon can't do it. Of course, running manually Eclipse on the terminal is okay. I tried to place . /opt/intel/bin/compilervars.sh intel64 on several places such as /etc/profile and /etc/bash.bashrc. But, still not working. Where is the best and correct place to call such environment setup?

  Read the article

• Nginx will not start

  - by user2426362

  I'm trying to run service nginx restart but I get this error: root@user /etc/nginx/sites-enabled # service nginx restart Restarting nginx: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] still could not bind() nginx. How can I fix this problem? I'm also running apache.

  Read the article

• Security of keyctl

  - by ftiaronsem

  Hello alltogether Today I set up an ecryptfs directory, which is automatically mounted at login via pam. To do so i followed the guide in the ecryptfs readme ecryptfs-readme To sum up, I now have a key stored in the usser session keyring. The first thing I do not understand is why this key is only showing up via keyctl show and not with the gnome-gui "Passwords and encryption keys". The second thing I am curious about is the security. I assume that my passphrase is somehow stored on the harddisk. But how exactly and how secure is this? Thanks in advance

  Read the article

• LibreOffice Icons are blurry

  - by Ryan McClure

  My LibreOffice icons for the individual apps are fine, they look great in both the launcher and the switcher. Yet, if I open the apps from the main LibreOffice program or if I open the document that I want to edit (And it opens its own "icon" as it always does), the icon is incredibly blurry. Here's what it looks like: On the launcher, I put the actual Calc and Impress launchers and on their left is the icons opened from a document. I know they aren't "blurry" as much as they are smaller. What should I do to remedy this? They are the same in the switcher (I can't find a way to take a screenshot of the switcher) Edit: I changed my Unity plugin from Rotated to standard, and the problem is still there; so, it isn't a Rotated bug.

  Read the article

• Xubuntu dual monitor broke display

  - by Arman yaraee

  After I used Settings Display to enable my second monitor, my first display is not working anymore either. So I enabled both, then clicked save configuration since it was working and boom it crashed. Now when I start up, I can see the screen which I type my password but it goes black after that! When I boot into recovery mode it works fine but in Settings Display I don't see HDMI at all to disable it. Is there anyway to restore all display setting to default? (I can Ctrl+ALT+F1 and type commands but xrandr returns no results over there) EDIT I should clarify that system bios is set to laptop display

  Read the article

• sensors reporting weird temperatures

  - by Felix

  lm-sensors is reporting weird temps for me: $ sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +32.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +42.0°C (high = +72.0°C, crit = +100.0°C) w83627dhg-isa-0290 Adapter: ISA adapter Vcore: +1.10 V (min = +0.00 V, max = +1.74 V) in1: +1.62 V (min = +0.06 V, max = +0.17 V) ALARM AVCC: +3.34 V (min = +2.98 V, max = +3.63 V) VCC: +3.34 V (min = +2.98 V, max = +3.63 V) in4: +1.83 V (min = +1.30 V, max = +1.15 V) ALARM in5: +1.26 V (min = +0.83 V, max = +1.03 V) ALARM in6: +0.11 V (min = +1.22 V, max = +0.56 V) ALARM 3VSB: +3.30 V (min = +2.98 V, max = +3.63 V) Vbat: +3.18 V (min = +2.70 V, max = +3.30 V) fan1: 0 RPM (min = 0 RPM, div = 128) ALARM fan2: 1117 RPM (min = 860 RPM, div = 8) fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +88.0°C (high = +20.0°C, hyst = +4.0°C) ALARM sensor = diode temp2: +25.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +121.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor cpu0_vid: +2.050 V Please note temp3. How can I know what temp3 is, and why it is so high? The system is really stable (which I guess it wouldn't be at those temps). Also, note the really decent core temps, which suggest a healthy system as well. My guess is that the readout is wrong. On another computer it reported temperatures below 0 degrees centigrade, which was not possible, considering the environment temperature of ~22-24. Is this some known bug/issue? Should I try some Windows programs (like CPU-Z) and see they give similar results?

  Read the article

• Linux DD command partition -to- partition

  - by Ben Jackson

  I just used the DD command to copy the contents of one partition over to another partition on another drive, like this: dd if=/dev/sda2 of=/dev/sdb2 bs=4096 conv=noerror sda2 partition was 66GB and sdb2 was 250GB. I read that by doing this the extra space on the drive I am copying to will be wasted, is this true? I wasn't worried about loosing the extra space for the time being however, I just ran: sudo kill -USR1 (PID) to view the current status of DD and it has written over 66GB of data, will it continue to write data until it gets to 250GB? If so, is there a way to stop the process without corrupting it as waiting for it to write blank space seems like a waste of time.

  Read the article

• Which logs will tell me about the Touchpad and Keyboard locking up?

  - by Sepero

  I have an Asus N53SM laptop that I leave running for several weeks at a time. I never put it in hibernate or suspend, I only close the lid when I'm not using it. After a few days or weeks of running, the touchpad and keyboard will Both lock up (at the same time) for no apparent reason. I could be just surfing the internet when it happens. The touchpad and keyboard seem to only lock up when I'm actively using the laptop (not when idle), which may mean it's related to something I press, but I'm not sure? The touchpad never locks or unlocks when Pressing FN and the designated touchpad lock key (it does not seem to work on Linux). While the touchpad and keyboard are locked, I am able to plug in my USB mouse and successfully use it to control the screen cursor. I can also remotely get into the system with vnc and ssh, everything seems to run fine there as well. No processes appear out of control. It's just the laptops physical touchpad and keyboard that are locking up. How might I go about diagnosing this problem? What system logs to look at? (anything specific to look for in them?) Perhaps I should try reloading some modules? Any thing else I should inspect?

  Read the article

• How to determine if a package is a meta-package from the command line?

  - by cirosantilli

  How can I determine if a package is a meta-package from the command line, possibly via apt-get, aptitude or apt-cache? I have tried: apt-cache show texlive-full apt-cache showpkg texlive-full but the only way I can tell this package is meta is by reading the "en-description" field. Is there a more automatic way of doing this, that will give me a yes/no response, or at least have a field such as then "en-description" dedicated to this?

  Read the article

• Wine / PlayOnLinux dependency issues when trying to install

  - by Glutanimate

  I am curious as to why installing PlayOnLinux entails removing seemingly unrelated packages like google-earth-stable. Is this the expected behaviour? This is the output I get when trying to install playonlinux through apt-get: The following packages were automatically installed and are no longer required: python-scour pax ncurses-term Use 'apt-get autoremove' to remove them. The following extra packages will be installed: binfmt-support fonts-horai-umefont fonts-unfonts-core libcapi20-3 libgif4:i386 libmpg123-0 libodbc1 libpam-winbind ttf-umefont ttf-unfonts-core unixodbc winbind wine wine-gecko1.4 wine-gecko1.4:i386 wine1.4 wine1.4-amd64 wine1.4-common wine1.4-i386:i386 winetricks Suggested packages: libmyodbc odbc-postgresql tdsodbc unixodbc-bin dosbox Recommended packages: gettext:i386 unixodbc:i386 The following packages will be REMOVED: alien cdbs debhelper dh-make dh-translations gettext google-earth-stable intltool intltool-debian lsb-core po-debconf The following NEW packages will be installed: binfmt-support fonts-horai-umefont fonts-unfonts-core libcapi20-3 libgif4:i386 libmpg123-0 libodbc1 libpam-winbind playonlinux ttf-umefont ttf-unfonts-core unixodbc winbind wine wine-gecko1.4 wine-gecko1.4:i386 wine1.4 wine1.4-amd64 wine1.4-common wine1.4-i386:i386 winetricks 0 upgraded, 21 newly installed, 11 to remove and 0 not upgraded. Need to get 145 MB of archives. After this operation, 275 MB of additional disk space will be used. This is the first time I am trying to install Wine / POL. I am using the default repositories, no Wine PPA or POL source added. These are all the PPAs I am using: How do I install POL / Wine without having to remove all these packages?

  Read the article

• How can I prevent [flush-8:16] and [jbd2/sdb2-8] from causing GUI unresponsiveness?

  - by ændrük

  Approximately twice a week, the entire graphical interface will lock up for about 10-20 seconds without warning while I am doing simple tasks such as browsing the web or writing a paper. When this happens, GUI elements do not respond to mouse or keyboard input, and the System Monitor applet displays 100% IOWait processor usage. Today, I finally happened to have GNOME Terminal already open when the problem started. Despite other applications such as Google Chrome, Firefox, GNOME Do, and GNOME Panel being unresponsive, the terminal was usable. I ran iotop and observed that commands named [flush-8:16] and [jbd2/sdb2-8] were alternately using 99.99% IO. What are these, and how can I prevent them from causing GUI unresponsiveness? Details $ mount | grep ^/dev /dev/sda1 on / type ext4 (rw,noatime,discard,errors=remount-ro,commit=0) /dev/sdb2 on /home type ext4 (rw,commit=0) /dev/sda is an OCZ-VERTEX2 and /dev/sdb is a WD10EARS. Here is dumpe2fs /dev/sdb2, if it's relevant.

  Read the article

• How do rsync from within a python script?

  - by Viswa

  I plan to move file from one system to another system. For this, I am using rsync command in linux terminal. It works fine. But I need to implement this command to python. I am very new in python, so I don't know the way of defining the rsync command. So please tell the steps to define it. This is my rsync command: rsync -avrz /opt/data/filename root@ip:/opt/data/file I need to implement this command in a python script.

  Read the article

• Where is Tor Browser opening Transmission from? How can I open the "same" Transmission?

  - by mattshepherd

  When I launch Tor-Browser, it first launches Vidalia, then a special version of Firefox bundled with the Tor Browser package. If I try to download a (legal!) torrent in the Tor Browser version of Firefox, it launches Transmission to do so. IF I launch Transmission from within the Tor Browser, it will remember my current torrents. This persists from one Tor Browser session to the next, including logouts, shutdowns, etc. If, however, I try to launch Transmission from its location (usr/bin/transmission-gtk), it starts Transmission "fresh" without remembering any torrents or other settings. I assume Transmission is somehow loading another version of itself for Firefox -- the one that remembers things -- that isn't somewhere I can find it. Only one transmission-gtk executable appears when I search my file system... the one in usr/bin. What's going on? How can I open Transmission and have it "remember" things without having to start a torrent on Tor-Browser first?

  Read the article

• How to auto-unlock Keyring Manager?

  - by Torben Gundtofte-Bruun

  How can I auto-unlock the Keyring Manager in Oneiric Ocelot? I have found this description for Intrepid, but Ocelot looks different so I can't follow the instructions. I have set up my machine to automatically log in to my account. I am using Unity. I don't mind the lesser security of having the keyring automatically unlocked. (This is a home desktop computer of a simple user, not a missile launch system.)

  Read the article

• Why is my RAID /dev/md1 showing up as /dev/md126? Is mdadm.conf being ignored?

  - by mmorris

  I created a RAID with: sudo mdadm --create --verbose /dev/md1 --level=mirror --raid-devices=2 /dev/sdb1 /dev/sdc1 sudo mdadm --create --verbose /dev/md2 --level=mirror --raid-devices=2 /dev/sdb2 /dev/sdc2 sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb Which I appended it to /etc/mdadm/mdadm.conf, see below: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Mon, 29 Oct 2012 16:06:12 -0500 # by mkconf $Id$ ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:06 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:06 md2 So I think all is good and I reboot. After the reboot, /dev/md1 is now /dev/md126 and /dev/md2 is now /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:18 md brw-rw---- 1 root disk 9, 126 Oct 30 11:18 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:18 md127 All is not lost, I: sudo mdadm --stop /dev/md126 sudo mdadm --stop /dev/md127 sudo mdadm --assemble --verbose /dev/md1 /dev/sdb1 /dev/sdc1 sudo mdadm --assemble --verbose /dev/md2 /dev/sdb2 /dev/sdc2 and verify everything: sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:26 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:26 md2 So once again, I think all is good and I reboot. Again, after the reboot, /dev/md1 is /dev/md126 and /dev/md2 is /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:42 md brw-rw---- 1 root disk 9, 126 Oct 30 11:42 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:42 md127 What am I missing here?

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• How can I install Insight debugger?

  - by DandyWalker

  Hello. I am following along a book in which Insight debugger is required. I didn't find it on my Maverick. I googled and I found that it's not supported in debian anymore but I really need to install it. I tried to compile the source and it installed but keep telling me that tk is missing whenever i start it. I installed tk with sudo aptitude install tk then tried to run again it's the same. I compiled it one more time and nothing really changes. So please how can I install that ? Update: This is the message i get Tk_Init failed: Can't find a usable tk.tcl in the following directories: /usr/local/share/tk8.4 /usr/local/lib/tk8.4 /usr/lib/tk8.4 /usr/local/library /usr/library /usr/tk8.4.1/library /tk8.4.1/library /usr/local/share/tk8.4/tk.tcl: no event type or button # or keysym no event type or button # or keysym while executing "bind Listbox <MouseWheel> { %W yview scroll [expr {- (%D / 120) * 4}] units }" (file "/usr/local/share/tk8.4/listbox.tcl" line 182) invoked from within "source /usr/local/share/tk8.4/listbox.tcl" (in namespace eval "::" script line 1) invoked from within "namespace eval :: [list source [file join $::tk_library $file.tcl]]" (procedure "SourceLibFile" line 2) invoked from within "SourceLibFile listbox" (in namespace eval "::tk" script line 4) invoked from within "namespace eval ::tk { SourceLibFile button SourceLibFile entry SourceLibFile listbox SourceLibFile menu SourceLibFile panedwindow SourceLibFile ..." invoked from within "if {$::tk_library ne ""} { if {[string equal $tcl_platform(platform) "macintosh"]} { proc ::tk::SourceLibFile {file} { if {[catch { namesp..." (file "/usr/local/share/tk8.4/tk.tcl" line 393) invoked from within "source /usr/local/share/tk8.4/tk.tcl" ("uplevel" body line 1) invoked from within "uplevel #0 [list source $file]" This probably means that tk wasn't installed properly.

  Read the article

• mysql service do not launch

  - by ted

  Sorry for my English; I was trying to create db with rake in RoR application that has been configured for MySQL(gem installed, settings changed). After that attempt mysql-server broke: d@calister:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) mysqld is not running at all: d@calister:~$ ps aux | grep mysql d 3769 0.0 0.0 4368 832 pts/0 S+ 18:03 0:00 grep --color=auto mysql And also it doesn't seem it would like to run: d@calister:~$ sudo service mysql start start: Job failed to start Any suggestions? Thanks EDIT: d@calister:~$ sudo -u mysql mysqld 120520 18:45:11 [Note] Plugin 'FEDERATED' is disabled. mysqld: Table 'mysql.plugin' doesn't exist 120520 18:45:11 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 120520 18:45:11 InnoDB: The InnoDB memory heap is disabled 120520 18:45:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120520 18:45:11 InnoDB: Compressed tables use zlib 1.2.3.4 120520 18:45:11 InnoDB: Initializing buffer pool, size = 128.0M 120520 18:45:11 InnoDB: Completed initialization of buffer pool 120520 18:45:11 InnoDB: highest supported file format is Barracuda. 120520 18:45:12 InnoDB: Waiting for the background threads to start 120520 18:45:13 InnoDB: 1.1.8 started; log sequence number 1589459 120520 18:45:13 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist

  Read the article

• Preventing battery from charging

  - by intuited

  I'm running on UPS power and would like to prevent the laptop's battery from charging, to increase the amount of power available to other devices. Is there a way to do this? update The machine is a Dell Latitude D400. If people want more details, just ask. Also, I'm gathering that I need to explain my desired setup a little better. I've gotten a bunch of suggestions about taking the battery out. I'm not sure if people are suggesting to take the battery out while the machine is running — this, as I understand, is not a good idea with most laptops — or to just remove the battery altogether. The latter option is not optimal, because ideally I'd like to use the 30-60 minutes of power in the laptop battery and then switch over to UPS power. The details of the switch-over may constitute a separate question, but if I can't find a way to keep the laptop battery from charging, then removing the battery from the machine altogether may be the best way to do this. I'm not sure yet if this machine will run without a battery, but I'll check that out. Other than the laptop, the UPS is just supporting a cable modem and router and a USB hub. Again in the idealized version of this setup, all the power management changes would be automated, i.e. not require replugging anything or pressing Fn-keys. I'd like the machine to start using laptop battery power when apcupsd indicates that the UPS A/C is out, and then start using UPS power, but not charging the battery, when the battery is almost depleted.

  Read the article

• Linux Mint: How do I autorun rdp script?

  - by Rommel

  HI to all my name is Rommel... I'm new to Linux system coz im more into windows, but now i wanna try Linux os. I have this Linux Mint and i installed it on to one of my desktop PC, i have downloaded and installed freerdp-x11 for me to connect into my windows terminal server...The thing that I really need help is, i want the terminal command line to connect automatically to the windows terminal server so that every time i boot my Linux Mint pc i wouldn't have to keep typing "xfreerdp 000.000.0.000" on the terminal command line...Is there a script for it..???? PLease guys i really need your help on this... You can email me at this address: [email protected] or [email protected] Thanks in advance.

  Read the article

• which default.list should i modify for default applications and what are the differences between the 2

  - by damien

  I would like to add miro to the default application GUI in system settings/default applications.I added ;miro.desktopnext to all rhythmbox.desktop entries eventually discovering if it was not added to audio/x-vorbis+ogg=rhythmbox.desktop as audio/x-vorbis+ogg=rhythmbox.desktop;miro.desktop it would not appear in the system settings/default applications drop down list for audio. I can find default.list in either /etc/gnome/defaults.list or /usr/share/applications/defaults.list modifying either gives me the same results.What is the difference and which is the correct list to modify?

  Read the article

• High number of ethernet errors. Tool for testing the ethernet card?

  - by Fabio Dalla Libera

  I have an Asus Sabertooth X79. I often get corrupted files. I checked the RAM, but memtest finds no errors. To avoid the possibility of disk errors, I tried copying the files to tmpfs. If I copy from the network, I get md5sum mismatches about once every 10 times using a 6Gb file. Copying from RAM to RAM, I didn't get mismatches. I get a very high number of errors in ifconfig (compared to others PCs I just took as reference, which have 0 with much more traffic). Here is an example RX packets:13972848 errors:200 dropped:0 overruns:0 frame:101 The motherboard is new, but do you think there're some problems with it? What could I use to test the (integrated) network adapter? What else do you think I should double check? --edit-- I tried another NIC, it gives a lot of Corrupted MAC on Input. Disconnecting: Packet corrupt lost connection. I noticed that another PC downloads at 11.1MB/s without problems. This pc at 66.0 MB/s. Is there any way to try to limit the speed?

  Read the article

• How to convert unconvertable & unviewable .ts files?

  - by Evelin Versh

  How to convert .ts files that can not be converted with usual WinFF, Avidemux etc programs? The .ts files in question are recorded from TV with STV digital cable digibox, viewable to me so far ONLY with that same digibox. All the video-playing programs i tried do not open the files at all (e.g. classical VLC and WinMedia player). All but 1 video converters i tried also are not able even to open or load the file into the program, therefore no conversion is possible. According to WinFF it can not find codec parameters during the conversion, evidently leading to nothing-happening???! HELP!, please.

  Read the article

• What are fail2ban's log iptables "returned 400" entries?

  - by luri

  In my fail2ban.log there are some entries the meaning of which I don't understand (and haven't found searching around)... For instance, a couple of examples from my log: iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh-ddos returned 400 ... iptables -I INPUT -p tcp -m multiport --dports http,https -j fail2ban-apache-overflows returned 400 So my questions would be: Are those lines errors? If they are... is it a fail2ban problem or an iptables one? If they are.... what do those errors mean?... and... how can they be avoided (if they have to)?

  Read the article

< Previous Page | 870 871 872 873 874 875 876 877 878 879 880 881  | Next Page >