Search Results

Search found 11707 results on 469 pages for 'boot failure'.

Page 88/469 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Sparc v440 unable 2 boot after recommended patch install

    - by user100660
    After installing the October 2011 recommended patch bundle on a Solaris 10 the host fails to boot. The output is {0} ok boot SC Alert: Host System has Reset screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Sun Fire V440, No Keyboard Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.10.10, 8192 MB memory installed, Serial #54744555. Ethernet address 0:3:ba:43:55:eb, Host ID: 834355eb. Rebooting with command: boot Boot device: /pci@1f,700000/scsi@2/disk@0,0:a File and args: \ Evaluating: Out of memory Warning: Fcode sequence resulted in a net stack depth change of 1 Evaluating: Evaluating: The file just loaded does not appear to be executable. {3} ok If I do a boot -F failsafe the host come up and I'm able to mount the root device (ufs on /dev/dsk/c1t0d0s0) and nothing appears broken, i.e I can see the logfiles from the patch install etc. Root device still have 1GB+ free. Only 2 kernel patches was installed from the patch bundle: 144500-19 & 147440-02. Any hints how to debug it further, etc.

    Read the article

  • Boot xen server through ipxe

    - by Ghassen Telmoudi
    I'm want install Xen Server 6.2 though ipxe, I tried different configurations, no luck making to work until now. I found some may example to boot from pxe using TFTP server, and here is an example: default xenserver-auto label xenserver-auto kernel mboot.c32 append xenserver/xen.gz dom0_max_vcpus=1-2 dom0_mem=752M,max:752M com1=115200,8n1 console=com1,vga --- xenserver/vmlinuz xencons=hvc console=hvc0 console=tty0 answerfile=http://[pxehost]/answerfile.xml remotelog=[SYSLOG] install --- xenserver/install.img The problem is that ipxe uses different syntax, I could not figure out how to convert this configuration to work on ipxe. Here is my ipxe file so far: #!ipxe echo "XEN Server is booting up" initrd http://server-ip/pxe/xen/boot/xen.gz kernel http://server-ip/pxe/xen/boot/pxelinux/mboot.c32 boot Can any one supply the correct configuration?

    Read the article

  • Two instances of Windows Vista on boot up after failed clean install

    - by Dwayne
    I tried to install a clean version of Vista but failed. I ended up with Windows and Windows.old on my C: drive and a dual boot option on boot up. I gave up and booted up the old version and tried to rename the Windows.old to Windows and was asked if I wanted to merge the two folders. I answered yes and all seemed OK until I booted up this morning and was given the choice of two versions of Vista. The first one is the one that failed to installed correctly and the second one is the old version. How can I get rid of the failed installation? I got rid of the bad boot via MSCONFIG. Here is my current situation: several hard drives installed Using C: as my boot drive a much larger drive (H:) for storing most of my files. I found a subfolder in my C:\windows folder named windows. Upon inspection I determined it to be older than the C:\windows folder and therefore it must be the older, working version of the boot. I renamed the C:\windows folder to c:\windows.bad and moved the sub windows to the C: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the C:\ copy and can I delete the C:\windows.bad file set?

    Read the article

  • Solaris10 x86 mirror. Making second disk booteable when failure

    - by Kani
    Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

    Read the article

  • Kernel Panic with gentoo boot (root partition not found)

    - by JB87
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) grub.conf default 0 timeout 30 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.34-r6 root (hd0,0) kernel /boot/kernel-2.6.34-gentoo-r6 root=/dev/ram0 real_root=/dev/sda3 vim:ft=conf: fdisk -l Device Boot Start End Blocks Id System /dev/sda1 * 1 5 40131 83 Linux /dev/sda2 6 71 530145 82 Linux swap / Solaris /dev/sda3 72 1044 7815622+ 83 Linux so im having trouble getting gentoo to boot, how can I change it from looking for root at block(1,0) to block(0,0) which is where my root partition is created? I though setting it to look to that hdd in grub is all I needed? that is my first guess to what might be causing the problem but not sure why it is giving this error. please advise...

    Read the article

  • How to detect hard disk failure?

    - by Devator
    So, one of my servers has a hard disk failure. It's running software RAID, the system locked up and according to /proc/mdstat (and /var/log/messages), it's really down: Personalities : [raid1] md2 : active raid1 sdb2[1] 104320 blocks [2/1] [_U] md5 : active raid1 sdb5[1] 2104448 blocks [2/1] [_U] md6 : active raid1 sdb6[1] 830134656 blocks [2/1] [_U] md1 : active raid1 sdb1[1] 143363968 blocks [2/1] [_U] and Nov 5 22:04:37 m38501 smartd[4467]: Device: /dev/sda, not capable of SMART self-check However when I do smartctl -H /dev/sda, it passes the test. It also passes the test with smartctl --test=short /dev/sda. So, is smartctl a broken testing tool, or am I doing something completely off?

    Read the article

  • Dell XPS m1530 system cannot boot need 130w or greater

    - by KPS
    I have a Dell XPS M1530 and I lost my old AC adapter but ordered a new one. For the longest time it always had a battery charge so I was able to boot into the OS but now it is completely dead. I have a generic charger that slowly charged the laptop when it was in the OS but does not when the computer is off. When I boot up I get the following error: The AC power adapter type cannot be determined. The system can only boot with a 130 W power adapter or greater. Strike F1 key to shutdown. I cannot even enter the BIOs setup screen or boot menu, is there a way around this? I heard from the local tech that Dell has a special feature to boot from thumb drive before getting past the initial logo. I am doing my best to avoid purchasing a new charger since it worked just fine when the OS was running, I am hoping to get this thing going. Is there a way to charge the battery externally? Thanks in advance for any help!

    Read the article

  • DNS server failure when forwarding

    - by Abraham Katz
    I run Bind 9 on a Ubuntu 12.04 server. I want this server to be a sort of a "wrapper" over my default server, so that it will respond to "domain_name.My_TLD" itself and forward requests to any other request. The server resides in a domain (Disconnected from the internet), so I configured it to zone "company_domain."{ type forward; forwarders { 1.2.3.4 }; #the DC's ip }; When i query it about sommething.company_domain. it sends a query to the DC and gets a response, but it returns "server failure". What can cause that? Cheers, Abraham

    Read the article

  • Cyrus: authentication failure: checkpass failed

    - by Nick
    I'm trying to get Cyrus IMAP (v 2.2 on Ubuntu 9.04) setup and working, but I'm having a bit of trouble getting the login working correctly. I've created a mailbox for my test user "nrahl": cm user/nrahl and then created a password: $ saslpasswd2 nrahl I'm attempting to connect to the mailbox using Thunderbird. I'm using the machine's LAN IP address as the host, and "nrahl" as the username. It connects to the server and prompts me for the password. When I enter it, I get "Login to server failed." in Thunderbird, and /var/log/mail.log shows: Apr 15 19:20:01 IMAP cyrus/imap[1930]: accepted connection Apr 15 19:20:09 IMAP cyrus/imap[1930]: badlogin: [192.168.5.21] plaintext nrahl SASL(-13): authentication failure: checkpass failed Part of /etc/imapd.conf with comments removed: sieveusehomedir: false sievedir: /var/spool/sieve #mailnotifier: zephyr #sievenotifier: zephyr #dracinterval: 0 #drachost: localhost hashimapspool: true allowplaintext: yes sasl_mech_list: PLAIN #allowapop: no #sasl_maximum_layer: 256 #loginrealms: example.com #virtdomains: userid #defaultdomain: sasl_pwcheck_method: saslauthd #sasl_auxprop_plugin: sasldb sasl_auto_transition: no

    Read the article

  • Debian software raid 1: boot from both disk

    - by bsreekanth
    I newly installed debian squeeze with software raid.The way I did was, as also given in this thread. I have 2 HDD with 500 GB each. For each of them, I created 3 partitions (/boot, / and swap) I selected the hard drive and created a new partition table I created a new partition that was 1GB. I then specified to use the partition as a Physical Volume for RAID. and used for /boot and enabled bootable. Created another partition, which is of 480 GB, and then specified to use the partition as a Physical Volume for RAID. and used for /. Created another partion and used for swap Then RAID configuration: Through Configure RAID menu - create MD device - (2 for the number of drives, 0 for spare devices) Next select the partitions you want to be members of /dev/MD0. I selected /dev/sda1 and /dev/sdb1 (for /boot) Next select the partitions you want to be members of /dev/MD1. I selected /dev/sda6 and /dev/sdb6 (for /) And no RAID for swap partitions 'Finish Partitioning and write changes to disk' -- Finish the rest of the install like normal Everything is ok now, except I am not sure how to test my raid config. When I pull the power of the HDD, it only boots from one disk. I read in some forum that I may have to install GRUB manually on the other. In Debian Squeeze, there is no grub command. Not sure how to make my software raid bootable from both disk. Also, please comment on my steps above. Anything unusual. I configured /boot partitions of both disks to be boot=yes. Not sure whether that is ok. Thanks, Bsr

    Read the article

  • Skipping scheduled self-tests and predicting drive EOL

    - by Steve Madsen
    For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

    Read the article

  • Agent admitted failure to sign using the key.

    - by Delirium tremens
    .ssh dir is chmodded 700, id_rsa.pub 600, id_rsa 400. I ran ssh-keygen -t rsa, imported key to launchpad and ran bzr branch lp:unity, but got error message: Agent admitted failure to sign using the key. Permission denied (publickey). bzr: ERROR: Connection closed: Unexpected end of message. Please check connectivity and permissions, and report a bug if problems persist. auth.log: Nov 28 20:23:13 ubuntu sudo: deltrem : TTY=pts/0 ; PWD=/home/deltrem/Documentos/repositories ; USER=root ; COMMAND=/usr/bin/bzr branch lp:unity Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session opened for user root by (uid=0) Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session closed for user root Nov 28 20:41:04 ubuntu gnome-screensaver-dialog: gkr-pam: unlocked login keyring

    Read the article

  • HP ProLiant Smart Array "lock up" code 0x11

    - by ewwhite
    I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must have been 100+). The ASR did not trigger at the specified watchdog timeout. I had to force a reboot from the ILO. During POST, I received the following error: A controller failure event occurred prior to this power-up. (Previous lock up code = 0x11) I haven't pulled the ADU report yet, but I'm curious as to what this error actually means. I was not responsible for the the installation, but can see that the firmware is very old. But if there's anything else I should know about the error, I'd like to know for the post-mortem report. edit - I should add that the server had 95 days of uptime prior to the lock up.

    Read the article

  • sysprep failure on Windows Server 2008

    - by dushyantp
    Before deploying a Azure VM Role, we need to perform %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown But in my case the sysprep fails with the log file %windir%\system32\sysprep\Panther\setuperr.txt saying: 2012-07-05 08:03:57, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31 2012-07-05 08:03:57, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f I do not always want to create a new image. Is there any work around? I followed the instructions in MS support here and tried: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /unattend:.\unattend.xml It did not work. Under certain circumstances, I need to tear down the VM Image from azure and re-deploy with some more changes. So sysprep has to run almost twice every week.

    Read the article

  • IBM x260m won't boot from PCI raid card

    - by syrenity
    Hi. We ghosted our old Windows 2003 drive to a new 1TB one, and connected through new PCI SATA card. The server fails to boot with error 1962: Boot sector not found. When we connect the drive directly to motherboard, it boots fine, so the problem is probably in getting BIOS boot from the SATA card. Does anyone know how to do it? Thanks.

    Read the article

  • Strange failure audit in 2003 R2 X64 SP2

    - by Az
    our server is running 2003 R2 X64 SP2, we keep seeing this in clusters of around 4 rapid fire. Sometimes 2 hours, sometimes around 8 hours apart with slight variations. I am also seeing the same blank username and domain in an account locked out message, I have tried disabling all scheduled tasks, if anyone has any idea please let me know! I find these processes running out of svc host: AeLookupSvc, AppMgmt, BITS, Browser, CryptSvc, dmserver, EventSystem, helpsvc, IAS, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, winmgmt, wuauserv, WZCSVC Logon Failure: Reason: Account currently disabled User Name: Domain: Logon Type: 3 Logon Process: Authz Authentication Package: Kerberos Workstation Name: PPCLUBES_TS Caller User Name: PPCLUBES_TS$ Caller Domain: PPCLUBES Caller Logon ID: (0x0,0x3E7) Caller Process ID: 928 Transited Services: - Source Network Address: - Source Port: -

    Read the article

  • Windows Server 2008 R2 and Keyboards

    - by Brian
    Hello, I have a machine with WIN server 2008 R2 installed, when the machine boots up, it says keyboard failure. The keyboard I had was from an older machine and was PS/2, I got a PS/2 to USB converter in order for it to work, but it says keyboard failure and doesn't work. Is it because it's pretty old and that's it, or does it have to be USB? I'm going to look into a new one, but want to make sure I don't get this issue again... Thanks.

    Read the article

  • How to troubleshoot a service failure?

    - by AngryHacker
    I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

    Read the article

  • OpenLDAP server logs filled with "TLS negotiation failure"

    - by WildVelociraptor
    I recently migrated an old OpenLDAP setup to a newer server, with a more robust certificate setup. Currently, most hosts are required to verify the cert matches the host: tls_checkpeer yes TLS_REQCERT always In the server logs, there are multiple occurences of: Nov 6 10:45:08 <servername> slapd[1773]: conn=2785646 fd=35 closed (TLS negotiation failure) These errors appear from multiple hosts, but there don't seem to be any issues actually logging into those servers with an LDAP account. Does anyone know what would cause these errors? The server is running Ubuntu 12.04.2, and OpenLDAP version 2.4.28. The cert was generated using GnuTLS.

    Read the article

  • network boot options hosted on windows (xp or 7)

    - by Crash893
    I'm looking to setup a quick and dirty network boot server to install xp on a beatup laptop that has a bad cdrom but the option to "network boot" (compaq pasario 700) 1) what is the diffrence between pxe and Ris 2) which one is most likely to be the one used on the laptop mentioned above 3) is there a windows program to run a boot server 4) what files will i need to have can i jut use the cd or do i need to rip it to files or and iso? thanks Rob

    Read the article

  • Converting software RAID1 to RAID10 for /boot

    - by luckytaxi
    Array info: /dev/md0 - /dev/sda1 and /dev/sdb1 /dev/md2 - /dev/sda2 and /dev/sdb2 Partition info: /boot - /dev/md0 / - /dev/md1 I have two drives that are setup as RAID1 using software RAID on Redhat. I added two additional drives (same size) and I would like to conver the RAID1 to a RAID10. The problem I'm having is adding the last drive to the array. I've gotten as far as creating a RAID10 with two missing devices but as soon as I add the last drive, all hell breaks loose. It seems /dev/sda1 is the culprit. What I'm not too sure about is how to create the RAID10. I've tried the following mdadm --create /dev/md2 --level=raid10 --raid-device=4 /dev/sdc1 missing /dev/sdd1 missing I then proceeded to fail /dev/sdb1 from /dev/md0 and added that partition to /dev/md2. I proceeded to install the MBR on EACH partition since boot resides on /dev/sdx1 on each drive. As a test, all is well, I'm able to boot back into the system once I do a quick reboot. Now, when I go add the last drive /dev/sda1, it breaks. I attempted to install grub on /dev/sda1 and I get the following ... grub> root (hd0,0) /dev/sda root (hd0,0) /dev/sda Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type At this point, the array is hosed I believe. I rebooted the server and it refuses to boot.

    Read the article

  • HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

    - by Jaime
    Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

    Read the article

  • Boot Camp fails to create a Windows partition because it can't move files

    - by Jens Bannmann
    I'm running Mac OS X 10.6 (Snow Leopard) on a mac with a 320 GB drive, 167GB free space, and I can't get Boot Camp running. The wizard starts creating the Windows partition, but fails with a message claiming it cannot move some files. The message suggests to back up my hard disk, reformat it, restore my files, and re-run Boot Camp wizard. The problem is: Though I do have backups (Time Machine), I don't feel like formatting my hard disk right now :-) I found a thread in some forum discussing this problem. The suggestion was to defragment my volume with iDefrag, and lots of people claimed that solved the issue. So I went ahead and got iDefrag 1.7.1, created a bootable DVD and chose the "compact" setting recommended before partitioning - but still no luck with Boot Camp! So how do I get this working? Fun note: last year, I briefly set up Boot Camp with 10.5, and it worked perfectly. Probably I did not use that much hard disk space back then...

    Read the article

  • Windows External Harddisk drive letter after cloning boot partition to it

    - by gladiator2345
    I cloned my windows 7 installation on c: to external hard drive. I applied usb patch using pwboot and i could successfully boot into windows. But My problem is even though i am booting in to external hd the file reference and system path is pointing to c: on my internal hard disk. If i remove internal hd and boot it will get stuck at login screen. Is there any way i can force drive letter c: to my boot partition on external hd while booting from it.

    Read the article

  • Disk boot failure in Windows 7 64-bit after installing the latest NVIDIA drivers

    - by Domchi
    I successfully installed the newest NVIDIA drivers (275.33) in Windows 7 64-bit and rebooted afterwards just in case. After the reboot, I got an error about missing MBR. I disconnected the slave disk so that Windows doesn't get confused and got this message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER It seems that Windows doesn't recognize the main disk anymore. I booted from Windows install disk but the main disk doesn't get listed as possible Windows locations to repair, and I can't get to it from the recovery prompt. The BIOS does recognize it, and I'm able to see it if I run diskpart - however "detail disk" in diskpart says that there are no volumes on the disk. I also tried bootrec /FixMbr without effect, and bootrec /FixBoot which gives the error message: Element not found. What else can I do? Why would diskpart say there are no volumes on the disk?

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >