Search Results

Search found 66859 results on 2675 pages for 'windows domain'.

Page 880/2675 | < Previous Page | 876 877 878 879 880 881 882 883 884 885 886 887  | Next Page >

• How to install QEMU on Damn Small Linux?

  - by user2934303

  i'm trying to install QEMU on a Damn Small Linux installation in order to emulate pentium features in a 486 computer. Though DSL was descontinued, it's the only linux that runs reasonably on the 486 processor, most recent kernels doesn't even boot on 486 architecture. I tried Tiny Core Linux, but it doesn't work in 486, so i seem to have no escape here. The most recent image of DSL is from 2008, it uses kernel 2.4.x, and i couldn't find a way to compile QEMU on it. Firstly, it lacks several compile tools needed for compiling it, and, it have several dependency problems. I tried some pre-compiled packages, but the only one that worked was a QEMU 5.2 RPM package (it didn't had dependency problems), and it was way too old, it wasn't capable of running windows yet, it just gave me the option of emulating a code, not a full OS as windows, and it also didn't give me the option to choose which architecture i wanted it to emulate (-cpu option). Can anyone help me with this? Also, if someone can think of some alternative to it, i'd be grateful. Thanks.

  Read the article

• Remote Desktop Session Black after Minimize

  - by TorgoGuy

  PROBLEM: When I minimize a remote desktop session and restore it, the remote desktop screen shows up black. This only happens when connecting to a particular computer. DETAILS: If I start clicking around in the black area, portions of the screen will start redrawing and showing up correctly. For example, if I leave a window open in the remote session and click where that window is located on the remote computer, then that window--and only that window--will redraw, and sometimes a portion of that window won't redraw (usually the toolbar). And to clarify--the window only has to be minimized momentarily, so it doesn't seem to be a timeout issue. Clicking or typing in the remote session still causes the remote computer to respond appropriately. Disconnecting from the session and reconnecting restores the whole screen image, as does clicking all over the place in the black image (causing each section to redraw). CONFIGURATION: This problem only happens for me when connecting to a particular computer (a W2K Server box configured to allow remote administration) and only with certain client computers. I've tried 7 different client computers with various versions of Remote Desktop (the OSes were: Win2K, Server 2003, Server 2008, Windows 7 RC, 3 XP) and two of them exhibit the problem (one is one of the XP boxes and the other is Windows 7). Those same computers can RDP to other computers without problem. RESOLUTION ATTEMPTS: I have tried the following: Disable the LOCAL screen saver as mentioned on Technet Turned off bitmap caching in the client, as mentioned on many forums. Updated to version 6.1 of the remote desktop client Using mRemote (I doubted this would work since it uses MS's code for connecting to RDP servers) Turning off all video acceleration. QUESTION: Any ideas on what is causing this?

  Read the article

• SocketException (Timeout) only when running as scheduled task

  - by BVartin

  I'm running a C# web-scrapper application (that I wrote) on a Windows Server 2003 instance under a user belonging to the local Administrator group. When I run it within a desktop/remote-desktop session the application runs successfully but when I schedule it to run under the same user/security-context outside of the desktop session, all socket connections timeout. The scheduled task calls a batch file which in-turn calls the application. The Windows Server 2003 instance has a very basic configuration and isn't even connected to a domain. I cannot find anything in any firewall or security configuration which is preventing this but maybe I have overlooked something, can anyone be of any assistance? System.Net.WebException: Unable to connect to the remote server --- System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond X.X.X.X:443 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()

  Read the article

• Error message: do not have authority to access this function

  - by Ross

  Hi. I just reinstalled Windows on my computer after getting a virus. I worked with it for a while and everything worked as it should. I then used a backup of the computer that I had made a week or so earlier and copied the backup over my user folder. (That is, I took the folder named "Joe" from the backup drive and copied-replaced the whole thing over the folder named "Joe" on the new Windows install.) To do this I had to work from an Ubuntu live CD because some of the files were in use. Now the problem: After I did this copying my computer says that I have no authority. Anytime I try to access anything that is part of the operating system (Explorer, Personalize, Control Panel, etc) I get an error message that says I don't have the authority to do this. I am able to access things that aren't part of the OS: Chrome, Firefox, my accounting software, Rockbox, but nothing that is part of the OS. I only copied over the User file, so I didn't mess with the registry or anything, so I have no idea why this should be. Does anyone out in cyberspace have any idea? Thank you.

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• Safe mode boot with no change on screen but ongoing hard disk activity - why?

  - by omatai

  I have a machine with a dying hard drive - bad sectors are starting to multiply :-( The first sign (24 hours ago) was that it had an unmountable boot volume. At this time, I tried booting to safe mode with command prompt, which worked, after which I rebooted normally and ran a chkdsk. It has since been working as well as I could expect, but slowly getting less reliable. So I scheduled another chkdsk on both partitions (C: - boot, D: - data), having freed up a lot of space on both partitions to give Windows a little more scope for repairs (hopefully?). I then rebooted. On reboot, it protested about the unmountable boot volume again, so I booted to safe mode. I got the same list of drivers loaded as yesterday, and then no change to the screen for the past 2 hours. However, I see a flickering hard drive indicator light - not always on, but seldom ever off. What is happening? Is the chkdsk that runs in safe mode one which produces nothing on the screen and so chkdsk could be doing its thing... or is Windows still trying (but failing) to boot into Safe Mode?

  Read the article

• How to fix Browser Blue Screen of Death?

  - by WilliamKF

  I am running Windows XP SP3 and Firefox v3.6.2 and Internet Explorer and have an issue with Firefox and IE causing the Blue Screen of Death. If I run in Windows safe mode, it does not occur, but running normally, it seems my firefox profile is going bad and results in certain web pages causing the BSOD. IE is also getting BSOD on some pages. For example, presently, if I visit ebay.com in Firefox, it gets BSOD. It also fails when visiting http://www.google.com/ig?hl=en&source=iglk. IT removed my Firefox profile and that seemed to fix the issue for a while. However, now it has started occurring again. I turned off all firefox extensions and it still occurs. I'd like to fix my system so this does not occur. The IT folks don't seem to be able to solve this, so I am trying to fix it on my own. The BSOD is about something like (from memory) DRIVER_IRQL_NOT_LESS_OR_EQUAL. Why would safe mode avoid the issue and what does that tell us about the probable cause? I don't want to have to keep deleting my profile, so I'd like to find out the cause of the corruption.

  Read the article

• Error occurs when Win 7 opens

  - by user1708748

  I have an HP customized laptop barely a week old. Since yesterday it has given me an error message while opening Windows- every time. it gives error code (0x40000015) refers to an exception at location (0x0033fa4d). I have 64 bit Win 7 and had been transferring files. And installing programs. 8 GB Ram 650 gb hard drive. Not sure which program caused this. Q's that I've seen with this error code all say it occurs while shutting down. A search re. error code told me to use a removal tool. When I downloaded the tool,I got a message saying it is not compatible with Windows 7. Is that really possible? Search re. location code yielded nothing I am an intermediate user. I can restore to an earlier time but I don't know which program might do this again.

  Read the article

• HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

  - by Greg_the_Ant

  I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

  Read the article

• WinPcap/Wireshark install: where is packet.ddl?

  - by Annonomus Penguin

  I have Wireshark installed, and I'm getting this error: The NPF driver isn't running. You may have trouble capturing or listing interfaces. I realize this is something to do with WinPcap. It's not in control panel, as the FAQ states it should be. I've tried installing it, and it says that there is a previous version installed. This leaves me to believe this is the problem: To be absolutely sure that WinPcap has been installed, please look at your system folder: you should find files called packet.* and wpcap.dll. Please check the file dates: these should be compatible with the WinPcap release dates. We've had reports of trojans or other malware that silently install the WinPcap driver, NPF.sys. If you've been infected by them, you'll probably see the driver file in Windows\System32\Drivers, but no entries in the "Add or Remove Programs" applet and no dlls. I've searched my hard drive, but the only path is this: C:\Windows\SysWOW64\packet.dll Is this the file they are talking about? Should I delete this file? I'm not quite sure, so I thought I'd verify that this file is the right one.

  Read the article

• Providing access to a Samba server for VPN clients

  - by Kamil Kisiel

  We have some Windows users that connect to our network via VPN from home. They need to be able to connect to our Samba server and access a mapped network drive just as they do as when they are on our LAN. The complication is that VPN clients are placed on a subnet other than our office LAN, and behind a firewall. What's the easiest way for me to allow them to still connect to the network share? The solutions I've currently seen involve setting up a WINS server for name resolution purposes and then tunnelling a bunch of the NetBIOS stuff through the firewall. However that means I'd have to set up the VPN DHCP server to hand out the WINS address, something I'm not even sure is possible on the Cisco hardware we have. I'm thinking there must be an easier way. Should I use an LMHOSTS file? Or just map by IP address? Also, I'm not terribly familiar with Windows networking, so which ports would I need to pass through my firewall in order to get the file sharing through?

  Read the article

• Setting up CIFS ISO Repository for Xen

  - by user85610

  I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

  Read the article

• Apache start failing after apache config modifications, showing syntax error, cannot load php5apache2_2.dll into server

  - by Sandeepan Nath

  I am stuck again with apache setup guys. I am working on a Windows 7 system. I copied the working php5 installation directory from teammates, copied the necessary .dll files from inside php5 installation folder (like they were in the working setup of teammates) to my windows/system32/. Apache server started successfully with the default apache config file. I was able to access localhost in browser. But php code was not parsing. I noticed no such line like the following in the apache config file:- # PHP5 module LoadModule php5_module D:/php5/php5apache2_2.dll If I add this line, apache server start fails. Running test configuration gives the following error - httpd.exe: Syntax error on line 60 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load D:/php5/php5apache2_2.dll into server: The specified procedure could not be found. But the dll file is there in the specified location and I have given all permissions to the current system user to the php5 installation directory. The same line also appears in the apache error log, though I am not sure when exactly logs are written to the log file. I am confused if log entries are not made if I have opened the log file for reading? lol ... because I could not observe a pattern in when entries are made. I saw some log entries being made, some not. Oh, why is apache setup such a headache always????

  Read the article

• Safely removing my linux dual boot

  - by de1337ed

  Currently, I dual boot with win7 and opensuse 12.1. Is it okay if I first restore the MBR for win7, and then format the linux drives? Or would it be better for me to first format the linux drives, and then restore the MBR? The reason I ask this is sometimes I get nasty errors when I try and boot into my win7 cd in the latter method. Is it possible to restore the MBR without having to boot into the win7 cd? Like, can I remove linux using the disk management utility in win7, and then fix the mbr while I'm still in win7, or do I have to boot into the win7 cd? If I can do this, how do I go about doing so? Thank you. EDIT::::: The spamming of f8 didn't work, it just made loud beeping noises, so I decided to simply boot into my windows disk and use the bootsect /nt60 SYS /mbr command. Note: I haven't formatted my linux partition yet. After I did that, I restarted my computer, and nothing happened. Basically, GRUB is still the MBR and I'm still able to access openSUSE. I think the reason why this is happening is because I think my GRUB is on a separate partion than the linux OS. Here is a picture of my diskmgmt in win7: . openSUSE did all the partioning stuff for me. All I know is that the 40gb that is there is where openSUSE is installed, but I have no clue what's on the 6.05gb and the 14.75gb partitions. Can anyone help me find which partition GRUB is on, and then remove it so I can restore the windows MBR? Thank you.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Search inside of text files

  - by Matt

  So here is the situation. I currently run a mail server for my small non-profit company. My mail server (Merak Mail Server) keeps logs in .log files and mail as .tmp files. Essentially these are just text files that are kept on the server. Problem is that when I put text into the "Containing text" field on Windows Explorer, it always misses the files and tells me no results returned. Then when I search the files one by one (painful at best), I find the files I need. Do I not understand the search feature well enough, or maybe I have it indexing wrong. I really don't care what I need to use to search the files, even a third-party app is fine with me, I just want to type an email address into a box and search all of my log files or email files and find out which one I am looking for. It can be Windows Search or something else, as long as I can find a way to get the job done I will be happy. Pay solutions are fine as well. Thanks everyone in advance.

  Read the article

• Cisco ASA5505 won't sync with NTP

  - by Martijn Heemels

  Today I noticed that the clock my Cisco ASA 5505 firewall was running about 15 minutes late, which surprised me since I've set up the NTP client. My two NTP servers 10.10.0.1 and 10.10.0.2 are virtualized Windows Server 2008 R2 domain controllers, and both have the correct time. As shown below, the ASA knows about the two servers, can ping them and seems to poll them periodically, so I suppose it can reach them both. The ASA claims its time source is NTP, however the clock is unsynchronized. Neither host is marked as synced. Result of the command: "ping 10.10.0.1" Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.0.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms Result of the command: "sh ntp ass" address ref clock st when poll reach delay offset disp ~10.10.0.1 .LOCL. 1 78 1024 377 0.5 643.69 17.0 ~10.10.0.2 10.10.0.1 2 190 1024 377 0.9 655.91 58.4 * master (synced), # master (unsynced), + selected, - candidate, ~ configured Result of the command: "sh ntp stat" Clock is unsynchronized, stratum 16, no reference clock nominal freq is 99.9984 Hz, actual freq is 99.9984 Hz, precision is 2**6 reference time is 00000000.00000000 (07:28:16.000 CEST Thu Feb 7 2036) clock offset is 0.0000 msec, root delay is 0.00 msec root dispersion is 0.00 msec, peer dispersion is 0.00 msec Result of the command: "sh clock detail" 10:33:23.769 CEDT Tue Jun 26 2012 Time source is NTP UTC time is: 08:33:23 UTC Tue Jun 26 2012 Summer time starts 02:00:00 CEST Sun Mar 25 2012 Summer time ends 03:00:00 CEDT Sun Oct 28 2012 I've tried the basic steps of manually setting the time and removing and adding the timeservers, to no avail. My ASA's ntp config is simply: ntp server 10.10.0.1 ntp server 10.10.0.2 Do I need to enable authentication to use a Windows NTP server? Any thoughts?

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

• VNC as a Support Tool Over the Internet

  - by dosboy

  I'd like to set up an environment where I can use VNC to remotely support my clients over the internet. No VPNs involved. I've used the UltraVNC repeater in the past, but the problem is that it requires a dedicated Windows server. What I'd like to do is as follows: VNC Client (me) - NAT - Internet - NAT - VNC Server (the person I'm offering support to) I'd basically like the same functionality that the UltraVNC repeater offers, but the only internet environment I have to host something on is a Linux shared server (standard hosting - PHP, Apache, etc.). Requirements: Multiple platform support for both Client and Server - specifically Mac and Windows Allows for connection with multiple NATs involved (Client and Server side) Will allow me to use my existing hosting environment for any repeater that might be involved I believe the way this would work is that the Server (the person I'm offering support to) when online would connect to a listener on the internet. When they needed support I would connect my Client to the same listener, see them connected, and use the listener (man-in-the-middle) to piggyback my Client to connect to their Server. I'm open to using any software (not limiting myself to VNC) but would prefer a FOSS solution (which is why I'm leaning towards VNC). Any advice would be greatly appreciated.

  Read the article

• Can't access my accelerated hard disk from msdos after installing linux on ssd cache

  - by Chibueze Opata

  I mistakenly installed Linux Mint on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Mint and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

  Read the article

• How to detach a sql server 2008 database that is not in database list?

  - by Amir

  I installed SQL Server 2008 on Windows 7. Then I created a database. After 2 days I reinstalled Windows and SQL Server. Now I am trying to attach my database file, but I have encountered the error below. I think that the files are like an attached file and I can't attach them. What is difference between an attached file and a non-attached file? How can I attach this file? Please Help Me. Error Text: TITLE: Microsoft SQL Server Management Studio Attach database failed for Server 'AMIR-PC'. (Microsoft.SqlServer.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1540+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "F:\Company.mdf". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476

  Read the article

• Huge host CPU usage in idle vmware guest. Ubuntu 10.04 host, Vista SP2 guest

  - by themesandmodules

  I'm experiencing huge host CPU usage with an idle vmware guest. Host: Ubuntu 10.04 32-bit 2.6.32-24-generic-pae. (Very new install, i.e 24 hours ago) Hardware is Dell XPS M1530 laptop, 4GB ram. Intel Core II Duo T9300 2.50Ghz The virtualization setting "VT" or something is enabled in my bios. Guest: Completely fresh install of Windows Vista, upgraded to latest SP2 and all windows updates installed. 1024 - 1512MB ram allocated. Absolutely no other software installed on it, apart from VMWare tools. Situation When the guest is doing absolutely nothing, I watch with sysinternals process watch on the guest. This shows that system idle process is between 70 and 99%, usually around 95%. No actual process doing anything. On the host, I watch with top, I get cpu usage of 20% - 80%, usually around 30%. What I have tried Single and Dual processor available to guest - no change. Turn off all peripherals to guest - no network, drives, usb etc - no change. Turn off 3d acceleration for guest - perhaps a small improvement, or no change. Upping allocated ram to guest from 1024MB to 1512MB - no change. Yelling at vmware - no change. I have experienced a similar issue in the past, which was solved by setting the guest to have 1 CPU. This time that hasn't worked.

  Read the article

• Problem with network policy rule in Network Policy Server

  - by Robert Moir

  Trying to configure RADIUS for a college network, and have run into the following frustration: I can't set an "AND" condition for group membership of authenticated objects in the network policy rules, e.g. I'm trying to create a NPS rule that says, essentially "IF user is a member of [list of user groups] And is authenticating from a computer in [wireless computer group] then allow access. The screenshot above is the rule I am having trouble with. It does not work as written. The rule underneath it, which is identical in every aspect except the conditions rule, does work. I've tried changing the non-working rule to define each set of groups as "Windows group" rather than specifically as machine and user groups, with no change. With the "faulty" rule enabled and the working one disabled, any attempt to login with a valid account from a machine that is in the wireless computers group gives a 6273 audit event in the windows event log: Reason code 66 - "the user attempted to use an authentication method that is not enabled on the matching network policy". Disabling the "faulty" rule, enabling the other rule and logging in with the same account and computer works just fine.

  Read the article

• MySQL taking a long time to start

  - by Dscoduc

  I'm running Windows Server 2008 with MySQL installed and every time I reboot the server the MySQL Service doesn't start right away. A look into the Windows Eventlog shows that the MySQL Service was hung at startup. Looking at the Services.msc console shows the service state at Starting... Eventually, like 10 minutes, the MySQL Service actually finishes the startup process and the database becomes available for my Wordpress server... I looked at the MySQL .err files and didn't find anything that would indicate a delay in the statup process... Can anyone suggest a way to determine what is causing the delay, and more importantly, how to prevent the delay in the MySQL Startup? UPDATE: Here is the .err log contents from the shutdown to the startup complete. Notice the startup begins at 10:30:00 and the MySQL isn't ready for connections until 10:47:14, a full 17 minutes later: 100322 10:27:06 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: Normal shutdown 100322 10:27:06 [Note] Event Scheduler: Purging the queue. 0 events 100322 10:27:06 InnoDB: Starting shutdown... 100322 10:27:08 InnoDB: Shutdown completed; log sequence number 4 3854351346 100322 10:27:08 [Warning] Forcing shutdown of 1 plugins 100322 10:27:08 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: Shutdown complete 100322 10:30:00 [Note] Plugin 'FEDERATED' is disabled. 100322 10:30:01 InnoDB: Started; log sequence number 4 3854351346 100322 10:47:14 [Note] Event Scheduler: Loaded 0 events 100322 10:47:14 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: ready for connections. UPDATE 2: MySQL is configured as a service (part of the install process, nothing I did) and executes the following syntax (as it appears in the registry): "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --defaults-file="C:\Program Files\MySQL\MySQL Server 5.1\my.ini" MySQL

  Read the article

< Previous Page | 876 877 878 879 880 881 882 883 884 885 886 887  | Next Page >