Search Results

Search found 29222 results on 1169 pages for 'network security'.

Page 883/1169 | < Previous Page | 879 880 881 882 883 884 885 886 887 888 889 890  | Next Page >

  • How do I configure tinydns (with fefe's IPv6 patch) to listen on IPv6 address?

    - by Christian Hudon
    I'm setting up my network to support IPv6. I have static IPv6 addresses assigned to each interface of my router, and radvd advertising different prefixes on each interface. The next step would be to get my dnscache (from djbdns) working on IPv6. Said dnscache has fefe's IPv6 patch applied, so I assume it should work with IPv6. However, I can't find any documentation online on how to make the patched dnscache listen on IPv6. How do I configure tinydns and dnscache to listen on IPv6 too?

    Read the article

  • Using a Mac to share a VPN connection

    - by Luis Novo
    I am using an iMac to share a wired network connection with other devices in my house. I am using Apple's built-in sharing functionality which works very well. I have also been using Tunnelblick as an OpenVPN client. The two technologies work great when they are not used together. The moment I connect to my VPN, sharing stops working on all other devices; the whole point of this setup was for me to share my VPN connection. Is there a way to make Internet connection sharing and OpenVPN work together on the Mac? I am using Snow Leopard.

    Read the article

  • IP Forwarding and Routing in Windows 2008

    - by Danialzo
    I have Hyper-V running on a windows 2008. I got a new ip stack from the data center to be set on my virtual machines. But I have difficulties to set these IPs on my VMs because they are on different network. my current server ip is xxx.xxx.18.6 with MASK : 255.255.255.224 and the GW is xxx.xxx.18.1 my new ip stack is xxx.xxx.168.176/29 I can use RRAS to achieve this. Do I need to create another NIC? How do I make these VMs reachable from outside?

    Read the article

  • URL redirect to a virtual server on a VLAN

    - by zeroFiG
    I have a production site, running off 10 servers. I've been given another virtual server on the same network as these 10 servers, to use for testing purposes. This server doesn't have it's own DNS entry. Therefore I need to do a redirect to the site hosted on this virtual server for a sub-domain of the site running on the 10 other servers. So Basically I was wondering how I would configure a sub domain of my production server to point at the Virtual server for testing. I'm guessing I need to modify my site file in /etc/apache2/sites-available and add another virtual host like the following and modify the redirect match: <VirtualHost *> ServerName SUBDOMAIN.DOMAIN.com RedirectMatch 301 (.*) **IP ADDRESS** CustomLog /var/log/apache2/SUBDOMAIN.DOMAIN.com.access.log combined </VirtualHost> Do I set the redirect match to just the IP on the Virtual server, and then configure another site file in the sites-available directory, which will recption this redirect and point the browser towards the HTML root? Thanks, I hope I made myself clear.

    Read the article

  • Unable to connect to a remote SQL Server Instance over a VPN

    - by Jack Njiri
    I'm running SQL Server 2005 on two different servers running Win XP. The two servers are in different physical locations and are connected via a dedecated point to point data link in a virtual private network(VPN). Im only able to connect to the remote instance of SQL Server by specifying the IP address on the server name property. If I provide the actual server name say 'ServerA', then I get an error message. Everything works fine except configuring replication at the subscriber level, which requires the actual name of the instance, not an IP address or alias. I have already configured both instances on allow remote connections and im running the SQL Server Browser. How do I connect to the remote instance by providing the instance name? Alternatively how I configure subscription to a remote publisher without supplying the remote instance name?

    Read the article

  • "This computer has dynamically assigned IP addresses" error when installing Active Directory Domain Controller

    - by smhnaji
    This is a working Windows Server 2008 that I should install Active Directory on it. I found http://www.howtogeek.com/99323/ and followed the steps. After Additional Domain Controller Options, I'm asked the question "This computer has dynamically assigned IP addresses". As I see, the message states that Dynamic IP addressing has been used for the server, while this is wrong. When I come to Network And Sharing Center, and click on Local Area Connections - Properties - Internet Protocol Version 4 (TCP/IPv4) - Properties, I see that the main IP address (as well as DNS Server) and also all other IP addresses are assigned statically. So it should be OK. I cannot believe any server using dynamic IP(s)! Note: No IPv6 has been set for the server. Please tell me why the error is given and which of the options available, should I choose? Note that it's a production server and is working with many users in WORKGROUP. No change should be affected nor to the IPs, neither to users connecting to the server.

    Read the article

  • CodePlex Daily Summary for Saturday, October 27, 2012

    CodePlex Daily Summary for Saturday, October 27, 2012Popular ReleasesRazorSourceGenerator: RazorSourceGenerator v1.1 Installer: RazorSourceGenerator v1.1 Installer ?? include ??,???????。Fruit Juice: Fruit Juice v1.1: Changelog (v1.1):Minor design fixes; Added live tiles; Added the new Windows Phone Store Download Badge;ZXMAK2: Version 2.6.7.0: - small performance improvements - fix & improvements for Direct3D renderer (thanks to zebest for testing)Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.DbDiff: Database Diff and Database Scripting: 1.3.3.5: - Wrong load options (deskey wrong)Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 001: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes a fix for the Netflix example from Chapter 6 that was missing a service reference.PdfReport: PdfReport 1.3: - Removed the limitation of defining non duplicate column names. See DuplicateColumns sample for more info. - Added horizontal stack panel mode. See CharacterMap sample for more info. - Added pdfStamper to onFillAcroForm of PdfTemplate. See QuestionsAcroForm sample for more info. Added 6 new samples (http://pdfreport.codeplex.com/SourceControl/BrowseLatest): - AccountingBalanceColumn - CharacterMap - CustomPriceNumber - DuplicateColumns - QuestionsAcroForm - QuestionsFormUmbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceReadable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tensesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsNew Projects25minutes the simpliest, best looking, hassle free Pomodoro Technique® timer: 25 minutes __________________________________________________ it is the simplest, best looking, hassle free timer for all Pomodoro Technique® fans out there.Argument: A website for constructing logical arguments in tree form.Asset manager: More information comming soon!bootster: bootster is a bootstrapper for small/medium sized .net web projects.BugHerd-4-DNN: This DotNetNuke(TM) extension simplifies the integration of BugHerd on your DNN portals.CaptureLinks 2.0: CaptureLink2.0 with SharePoint 2013 SupportDeploy File Demo: Deployfile Demo is the companion piece to Deploy File Generator. It shows how to deploy files that have been imported into a special '.resources' file.DIfmClient: DIfmClient is a WPF (Windows Presentation Foundation) DI.FM streaming radio player, written in C#.FinApps201240: Aplicación Financiera para La CaixaFirstTasteKudo: Just a taste of Kudo feature.Imgx: This is specifically for internal use only.jamestest123: Blah blah blahMezanmiTechFireMyTeam: In short we can use this project for any rating systems.MezanmiTechInTouchReminder: just a way to contact peopleMoniMisiDemo: Para el desarrollo de aplicaciones web en ASP.net del tipo SPI (Single Page Interface).Orchard Redirect404: This project allows you to configure redirects for 404 errors via the Orchard admin interface. P/Opus (.NET Wrapper for libopus): P/Opus is a .NET library written in C# to wrap around the libopus C API/library to provide a more .NET friendly way of encoding and decoding Opus packets.Pengaturan Sambungan (Connection Setting): Aplikasi untuk menyimpan connection string secara terpisah dari program utamaPwdManagement: mgrrezaTest: TestSnowflake Id Generator: Snowflake is a network service for generating unique ID numbers at high scale with some simple guarantees.The Game for Microsoft Dynamics CRM2011: A solution containing a framework for Microsoft Dynamics CRM2011 to enable gamification of the product in order to drive user adoption and business objectives.UCMA 4.0 Async Extension Methods: This collection of extension methods makes it easy for developers to use the async/await pattern for multithreaded development with UCMA 4.0.ValtechGitTfs: Sandbox project to test git-tfs with a TFS serverWarriorG: PokerWeb site bán thú cung: [TRY]XVIB 360: XBOX 360???????????????????????。

    Read the article

  • DIY Homemade Hybrid Rocket Engine [Video]

    - by Jason Fitzpatrick
    Remember the guy with the cool DIY astronaut ice cream build? He’s back with a mini hybrid rocket engine that runs off oxygen and acrylic. I built a small rocket engine for demonstration purposes. The engine is built from a 2″ diameter acrylic rod through which I drilled a 0.5″ hole. The oxygen at 80 psi or less is passed through the hole and then is forced through a convergent-divergent nozzle at the tail end. The nozzle’s throat is about 0.25″ and expands to 0.625″. I lit the engine by inserting a burning cotton swab (with wooden stick) while a small amount of oxygen was flowing. The acrylic catches fire very easily in a pure oxygen environment. The engine can be throttled and shut off completely, which is a major benefit to hybrid engine designs. Solid-fuel rockets cannot be throttled or shut off, which makes them difficult to control. [via Make] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • Access Bind9 DNS in Virtualbox on Host

    - by Philipp Melab
    I've set up a Ubuntu 10.04 Virtual Box with a Bind9 DNS server. The Box has a NAT Network connection for internet access and a host-only adapter for static ip connections from the host (OSX Lion). Thats the only way i managed to get internet and static ip inside the box, guess there is a better one ... The DNS works fine from inside the virtualbox, but not from the host. The http and ftp on the guest system is accessible via both addresses, so connection between host and guest are fine i guess. I tried to add both IP's as name servers. I'm completely new to Bind9 and DNS configuration. Anybody has a hint for me whats wrong? Or how i have to configure the DNS server?

    Read the article

  • Wake on Lan/Wan won't work after some time has passsed

    - by Vian Esterhuizen
    I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

    Read the article

  • FTP error 425 failed to establish connection

    - by cKK
    Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

    Read the article

  • Not working WEP key in Ubuntu

    - by stupid-idiot
    This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

    Read the article

  • zip being too nice (Mac OS X)

    - by stib
    I use zip to do a regular backup of a local directory onto a remote machine. They don't believe in things like rsync here, so it's the best I can do (?). Here's the script I use echo $(date)>>~/backuplog.txt; if [[ -e /Volumes/backup/ ]]; then cd /Volumes/Non-RAID_Storage/; for file in projects/*; do nice -n 10 zip -vru9 /Volumes/backup/nonRaidStorage.backup.zip "$file" 2>&1 | grep -v "zip info: local extra (21 bytes)">>~/backuplog.txt; done; else echo "backup volume not mounted">>~/backuplog.txt; fi This all works fine, except that zip never uses much CPU, so it seems to be taking longer than it should. It never seems to get above 5%. I tried making it nice -20 but that didn't make any difference. Is it just the network or disc speeds bottlenecking the process or am I doing something wrong?

    Read the article

  • Can I password protect a Publisher file?

    - by tombull89
    I was asked ealier this week if it was possible to password protect a Microsoft Office 2007 Publisher document. I was under the impression that it would be like protecting a Word document, by going to Office Save As Word Document Tools General Options and creating a password to modify, like shown below. This also works for Excel documents. However, in Publisher 2007 the option is not there. The only option under "Tools" is "Map network drive". We overcame the issue as saving as a PDF and distributing that, but is there a way to do what we want?

    Read the article

  • Dual WAN port on a WRT54GL

    - by pufferfish
    Is it possible to reconfigure one of the LAN ports on a WRT54GL (running Tomato firmware) to act as a second WAN port? I have the following networks: PPOE connection to ADSL modem (works fine on the normal WAN port) WiFi neighbourhood network (in 178.X.X.X range), via a Mikrotik routerboard which I'd like to put on the WAN side of the router. I'd then like to set up routing so than some traffic (172.X.X.X) is routed to the Mikrotik and the rest to the ADSL modem. p.s. for practical reasons, I can't use the Mikrotik as the firewall/router. Edit: It seems this can be done by editing iptables, can someone tell me exactly how?

    Read the article

  • Netcat I/O enhancements

    - by user13277689
    When Netcat integrated into OpenSolaris it was already clear that there will be couple of enhancements needed. The biggest set of the changes made after Solaris 11 Express was released brings various I/O enhancements to netcat shipped with Solaris 11. Also, since Solaris 11, the netcat package is installed by default in all distribution forms (live CD, text install, ...). Now, let's take a look at the new functionality: /usr/bin/netcat alternative program name (symlink) -b bufsize I/O buffer size -E use exclusive bind for the listening socket -e program program to execute -F no network close upon EOF on stdin -i timeout extension of timeout specification -L timeout linger on close timeout -l -p port addr previously not allowed usage -m byte_count Quit after receiving byte_count bytes -N file pattern for UDP scanning -I bufsize size of input socket buffer -O bufsize size of output socket buffer -R redir_spec port redirection addr/port[/{tcp,udp}] syntax of redir_spec -Z bypass zone boundaries -q timeout timeout after EOF on stdin Obviously, the Swiss army knife of networking tools just got a bit thicker. While by themselves the options are pretty self explanatory, their combination together with other options, context of use or boundary values of option arguments make it possible to construct small but powerful tools. For example: the port redirector allows to convert TCP stream to UDP datagrams. the buffer size specification makes it possible to send one byte TCP segments or to produce IP fragments easily. the socket linger option can be used to produce TCP RST segments by setting the timeout to 0 execute option makes it possible to simulate TCP/UDP servers or clients with shell/python/Perl/whatever script etc. If you find some other helpful ways use please share via comments. Manual page nc(1) contains more details, along with examples on how to use some of these new options.

    Read the article

  • PXE Boot PCLinuxOS ISO

    - by DBNotCooper
    I'm in the process of trying to convert some computers at my local school to be diskless browser stations. We've identified PCLinuxOS as the OS we'd like to use due to it's easy interface for creating custom ISO images (we need WINE and some custom apps installed also, as well as FireFox). I've been having problems figuring out how to get an ISO to boot via PXE. In our network, I only have access to TFTP and HTTP, so I cannot use NFS. The machines all have enough memory (4 gigs) that they could use a ram drive to hold the ISO image, if that helps. Currently I've been looking at GPXE with GRUB/MEMDISK, but I don't know if that's the right solution, or even where a good resource is for setting it up. Searching the web has proved fruitless, as most of the information is either NFS-specific or out of date. The other students and I would appreciate any help! :)

    Read the article

  • Presario r3000 hangs on boot to Ubuntu 12.04

    - by Chris
    I have a Compaq Presario r3000 laptop with Ubuntu 12.04 32 bit. 1.2GB RAM, with a nvidia Gforce 420 Go with 32MB RAM. It hangs on bootup about 3 out of 4 times at either the purple screen, or with a cursor in the upper left corner. Booting without a splash screen shows it hanging after attempting to initialize the floppy controller. Unity has never booted to 3D either, only 2D, with the additional drivers always failing to install. I searched all over this board and found similar issues, and tried everything there. Extensive vid driver install and uninstalls. Network issues that I've since resolved. I even found a very similar topic with a fix that didn't work. I'll probably try a clean install today (given how much I've probably messed up), and I would really appreciate any ideas. I'm fairly new to Ubuntu, so if you would like to see any error logs or configs, please walk me through exactly how to get and post them here. Thanks.

    Read the article

  • How to Configure a vm on the same machine to do remote desktop [closed]

    - by Varun K
    I want to achieve following: (Note I'd like to get this done first of all with Win7 as both host and vm OS) Install Windows 7/xp/Windows 8 VM on Windows 7/Windows 8 host machine Configure it so that I can connect to it via remote desktop. This is because I use a screen reader software and audio output directly from VMs is not highly responsive. My software has a feature that it can connect to its copy on the remote machine (during rdp session) and then start receiving the text description which it translates into audio on the client (host in this case) machine. I want to know: Which VM software can let me do this – VMWare/Ms Virtual PC or VirtualBox If it is possible with every VM software, could you give an example of how to do this with anyone of these 3? Specifically, I know how to install Windows on VM (on both VMWare/Virtual PC), but don't really know how to configure a network such that I can remote into that VM from host OS. Hope it clarifies what I'm trying to achieve.

    Read the article

  • How to solve SocketException: Permission denied: connect

    - by luxinxian
    I recently encountered a problem getting a headache, need help... System consists of: Two subsystems, called A, B (each running on a standalone tomcat instance), currently running on the same machine. A invoke B's service via spring httpInvoker(http). B system also invoke other system's services via http. Symptoms: 1, the system starts to run normally after 10-15 days; 2, the system will run for a period of time after an exception: org.springframework.remoting.RemoteAccessException: Could not access HTTP invoker remote service at [http://xxx.xxx.xxx.xxx/remoting/call]; nested exception is java. net.SocketException: Permission denied: connect 3, when the exception occour, it continues, not only occasional .(it looks like some resources exhausted, but cpu rate < 5%, memory < 15%, network < 5%) 4, A, B when the system call fails, B system via http call to an external service also failed for the same exception. 5, closed two tomcat services, restart, and working properly. So repeatedly (step 1 - 5), has not found the root reason. Emvironment: windows 2008 R2 tomcat7.0.42 x86_64 oralce-jdk-1.7.0_40 Any ideas?

    Read the article

  • Annoying Search Behavior - Search Companion

    - by David Stein
    I'm running Windows XP Professional, and ever since the last service pack I've had a searching problem. When I want to search a network drive, I get the following message: This folder is not indexed. To search this directory plase use Search Companion or add this directory to your index via options. Basically, I have two questions. Is there some way that I can use the indexed search where appropriate and then have it switch over to the Search Companion automatically? Second, how does a programmer look at this code and think this is a good idea? I realize that this question is rhetorical. However, I must enter my search string into one search, receive the error, and then click "Search Companion" to bring up the new search window. This window doesn't even take the defaults from the previous one so I have to specify the search string and drive again.

    Read the article

  • Oracle Endeca Information Discovery 3.1 is Now Available

    - by p.anda
    Oracle Endeca Information Discovery (OEID) 3.1 is a major release that incorporates significant new self-service discovery capabilities for business users. These include agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI This release is available for download from: Oracle Delivery Cloud Oracle Technology Network Some of the what's new highlights ... Self-service data mashup... enables access to a wider variety of personal and trusted enterprise data sources. Blend multiple data sets in a single app. Agile discovery dashboards... allows users to easily create, configure, and securely share discovery dashboards with intelligent defaults, intuitive wizards and drag-and-drop configuration. Deeper unstructured analysis ... enables users to enrich text using term extraction and whitelist tagging while the data is live. Enhanced integration with OBI... provides easier wizards for data selection and enables OBI Server as a self-service data source. Enterprise-class data discovery... offers faster performance, a trusted data connection library, improved auditing and increased data connectivity for Hadoop, web content and Oracle Data Integrator. Find out more ... visit the OEID Overview page to download the What's New and related Data Sheet PDF documents. Have questions or want to share details for Oracle Endeca Information Discovery?  The MOS Communities is a great first stop to visit and you can stop-by at MOS OEID Community.

    Read the article

  • Is there a way to see what is typed or websites visted when a spouse is using google chrome in incognito ?

    - by Ken
    My spouse and I have 2 laptops both running windows 7 and I have 1 desktop running vista. I have reason to believe she is cheating and I want to watch her internet usage, She is always using google chrome in incognito mode. I have tried a few keyloggers but they never seem to be able to get the keystrokes when she is on google. I dont know if there is a way I can network them so they go thru my desktop then to the internet. We are using Brighthouse cable internet. any ideas would be great thank you

    Read the article

  • My internet connection just got really slow - How can I troubleshoot it?

    - by Walden
    A few days ago my connection became really slow. I have DSL which should be 3mb down and 768k up. I'm lucky if I get 768k down and 200k up. It sucks. I called my ISP, Verizon and they did some sort of line test and told me the problem was on my end. I rebooted my modem several times, like they told me. I'm not really sure why I even bothered calling them, the guy on the other end was just reading stuff out of a notebook - pretty useless. So, I checked my network traffic in windows resource monitor, and there doesn't seem to be anything there hogging the bandwidth. What else could be slowing my connection down on my PC? on my router? Something else?

    Read the article

  • unable to access shared drives n win7

    - by colin
    OK, this is doing my head in. Not your usual Win7 sharing problem. Just built a win 7 comp to go onto my home lan and be accessed by all on the network, mostly running XP SP3. Installed it as a single HD+DVD system, got it happy, then added my storage drives, set them up in the right order and letters, rebooted, and shared them. Couldn't access the computer at all from any XP machine. Set the pasword thingy in win7 to NO, and now I can "see" all four shared drives from any machine, but can access only two of them. Please tell me whats going on as I've done nothing different from one drive to the other, just installed and set up drive letters as normal, then shared the damn things. The odd thing about it? the two 1.5T drives that have a lot of data on board are accessable, the two nearly empty 500G ones are not. ANY ideas? Cheers, Colin

    Read the article

< Previous Page | 879 880 881 882 883 884 885 886 887 888 889 890  | Next Page >