Search Results

Search found 23374 results on 935 pages for 'james may'.

Page 885/935 | < Previous Page | 881 882 883 884 885 886 887 888 889 890 891 892 | Next Page >

I have Oracle SQL Developer Installed, Now What?

- by thatjeffsmith

If you’re here because you downloaded a copy of Oracle SQL Developer and now you need help connecting to a database, then you’re in the right place. I’ll show you what you need to get up and going so you can finish your homework, teach yourself Oracle database, or get ready for that job interview. You’ll need about 30 minutes to set everything up…and about 5 years to become proficient with Oracle Oracle Database come with SQL Developer but SQL Developer doesn’t include a database If you install Oracle database, it includes a copy of SQL Developer. If you’re running that copy of SQL Developer, please take a second to upgrade now, as it is WAY out of date. But I’m here to talk to the folks that have downloaded SQL Developer and want to know what to do next. You’ve got it running. You see this ‘Connection’ dialog, and… Where am I connecting to, and who as? You NEED a database Installing SQL Developer does not give you a database. So you’re going to need to install Oracle and create a database, or connect to a database that is already up and running somewhere. Basically you need to know the following: where is this database, what’s it called, and what port is the listener running on? The Default Connection properties in SQL Developer These default settings CAN work, but ONLY if you have installed Oracle Database Express Edition (XE). Localhost is a network alias for 127.0.0.1 which is an IP address that maps to the ‘local’ machine, or the machine you are reading this blog post on. The listener is a service that runs on the server and handles connections for the databases on that machine. You can run a database without a listener and you can run a listener without a database, but you can’t connect to a database on a different server unless both that database and listener are up and running. Each listener ‘listens’ on one or more ports, you need to know the port number for each connection. The default port is 1521, but 1522 is often pretty common. I know all of this sounds very complicated Oracle is a very sophisticated piece of software. It’s not analogous to downloading a mobile phone app and and using it 10 seconds later. It’s not like installing Office/Access either – it requires services, environment setup, kernel tweaks, etc. However. Normally an administrator will setup and install Oracle, create the database, and configure the listener for everyone else to use. They’ll often also setup the connection details for everyone via a ‘TNSNAMES.ORA’ file. This file contains a list of database connection details for folks to browse – kind of like an Oracle database phoneboook. If someone has given you a TNSNAMES.ORA file, or setup your machine to have access to a TNSNAMES file, then you can just switch to the ‘TNS’ connection type, and use the dropdown to select the database you want to connect to. Then you don’t have to worry about the server names, database names, and the port numbers. ORCL – that sounds promising! ORCL is the default SID when creating a new database with the Database Creation Assistant (DBCA). It’s just me, and I need help! No administrator, no database, no nothing. What do you do? You have a few options: Buy a copy of Oracle and download, install, and create a database Download and install XE (FREE!) Download, import, and run our Developer Days Hands-on-Lab (FREE!) If you’re a student (or anyone else) with little to no experience with Oracle, then I recommend the third option. Oracle Technology Network Developer Day: Hands-on Database Application Development Lab The OTN lab runs on a A Virtual Box image which contains: 11gR2 Enterprise Edition copy of Oracle a database and listener running for you to connect to lots of demo data for you to play with SQL Developer installed and ready to connect Some browser based labs you can step through to learn Oracle You download the image, you download and install Virtual Box (also FREE!), then you IMPORT the image you previously downloaded. You then ‘Start’ the image. It will boot a copy of Oracle Enterprise Linux (OEL), start your database, and all that jazz. You can then start up and run SQL Developer inside the image OR you can connect to the database running on the image using the copy of SQL Developer you installed on your host machine. Setup Port Forwarding to Make It Easy to Connect From Your Host When you start the image, it will be assigned an IP address. Depending on what network adapter you select in the image preferences, you may get something that can get out to the internet from your image, something your host machine can see and connect to, or something that kind of just lives out there in a vacuum. You want to avoid the ‘vacuum’ option – unless you’re OK with running SQL Developer inside the Linux image. Open the Virtual Box image properties and go to the Networking options. We’re going to setup port forwarding. This will tell your machine that anything that happens on port 1521 (the default Oracle Listener port), should just go to the image’s port 1521. So I can connect to ‘localhost’ and it will magically get transferred to the image that is running. Oracle Virtual Box Port Forwarding 1521 listener database Now You Just Need a Username and Password The default passwords on this image are all ‘oracle’ – so you can connect as SYS, HR, or whatever – just use ‘oracle’ as the password. The Linux passowrds are all ‘oracle’ too, so you can login as ‘root’ or as ‘oracle’ in the Linux desktop. Connect! Connect as HR to your Oracle database running on the OTN Developer Days Virtual Box image If you’re connecting to someone else’s database, you need to ask the person that manages that environment to create for you an account. Don’t try to ‘guess’ or ‘figure out’ what the username and password is. Introduce yourself, explain your situation, and ask kindly for access. This is your first test – can you connect? I know it’s hard to get started with Oracle. There are however many things we offer to make this easier. You’ll need to do a bit of RTM first though. Once you know what’s required, you will be much more likely to succeed. Of course, if you need help, you know where to find me

Read the article
CodePlex Daily Summary for Monday, April 12, 2010

CodePlex Daily Summary for Monday, April 12, 2010New Projects3 Hour Game Design Contest: The 3 Hour Game Design Contest is a programming contest for making simple games in 3 hours. 3 hours may not seem like enough time to make a game, b...BI Monkey SSIS ETL Framework: The BI Monkey SSIS ETL Framework is an ETL Execution, Control and Logging system for ETL projects using SSIS. It is supported by a SQL Server metad...Blend Sample Data Helpers: Helper behavior classes to generate sample images and data from Internet sources such as Flickr images. Bold TCP for Delphi 7: Open Sourcing the Bold TCP for Delphi 7.cfThreadingTools: This library project contains classes and extensions which will allow easy handling of multi-threaded UI-accesses.CuBiX_SDL: CuBiX_SDL : CuBiX est un projet personnel.Draglets: Draglets makes it easier for editors and CMS-developers to move and reorder content at their web sites. It's developed in ASP.NET, C# with WCF and ...DSQLT - Dynamic SQL Templates: DSQLT - Dynamic SQL Templates Use Stored Procedures as templates for dynamic SQL statements. Substitute parameters @0-@9 with values like objectna...Edtter: Edtter is a sample web application built on ASP.NET MVC 2 Framework. (Japanese Version Only)Forms Based Authentication Management - SharePoint2007FBA: This is my own update to Stacy Draper's FBABasic project for Forms Based Authentication in MOSS 2007. In additon to managing your fba user's roles,...Height Map to 3D World at XNA: Height Map to 3D World is a XNA project that developed firstly by Eric Grossinger and secondly improved by Karadeniz Technical University Computer ...HouseFly: A simple contact and note taking applicationITM 495 - iPhone Web App: School ProjectKaufleute: This will be finished laterLR: this project is about connecting toPowerShell Integration Services: A set of tools aimed at Extract Transform and Load tasks. Focused on getting the most common ETL tasks done without SSIS. Salient: A collection of, hopefully, useful libraries.Samurai.Validation: Extensible and flexible .Net object validation frameworkSamurai.Workflow: Samurai Workflow is a slim, easy-to-use workflow framework for WPF applications.SharePoint User Management WebPart: SharePoint User Management WebPartUrl shorte(ne)r: It's simple Url Shortener (like: http://tinyurl.com) Currently only Polish language is supported. In future will be provided multi language suppor...Yasbg: Yasbg (pronounced yas-bug) is Yet Another Static Blog Generator. It is made in C# using MarkdownSharp for markdown. Currently in alpha. New Releases.NET Extensions - Extension Methods Library: Release 2010.06: Added an universal approach for grouping extension methods like conversions. Conversion are now available on any data type (it's actually extension...3 Hour Game Design Contest: 3H-GDC mVII: This is the collection of game files for the 7th 3H-GDCB&W Port Scanner: Black`n`White Port Scanner 3.0: B&W Port Scanner 3 includes FTP Server detection tool, Better stability, Optimized memory management, Saving & Opening Result sets ... and more new...BI Monkey SSIS ETL Framework: Framework v1 Alpha: This Alpha release is not fully tested and some functionality is not operating as intended.Bluetooth Radar: Version 1.7: UI Changes Device UserControl Randomly placed devices.BugTracker.NET: BugTracker.NET 3.4.1: For the tasks/time tracking feature, added a way of viewing all the tasks at once, not just the tasks for one bug. Also added a way of exporting a...cfThreadingTools: cfThreadingTools 0.1.1.8: This is the first public available release. Following items are included: BaseTools-class which allows thread-safe setting of properties and callin...DeepZoom Pivot Constructor: DeepZoom Pivot Constructor v0.1: This is a test release of the library platform - Targets .NET 3.5 No samples yet, etc., but it works well :-)DSQLT - Dynamic SQL Templates: Initial release with License Included: nothing changed but license print procedure included the zip file contains database backup SQL script readmeForms Based Authentication Management - SharePoint2007FBA: SharePoint2007FBA 1.0.0.0: Downloads for the Project solution and the WSP package. Please read the Setup Guide. If you are unfamiliar with setting up Forms Based Authenticati...Foursquare BlogEngine Widget: foursquare widget for BlogEngine.NET version 0.3: To see the changes which have been made, visit http://philippkueng.ch/post/Foursquare-BlogEngineNET-widget-version-03.aspx For installation instruc...Framework Detector: FrameworkDetect Support .NET 4 v2: FrameworkDetect Support .NET 4Happy Turtle Plugins for BVI :: Repository Based Versioning for Visual Studio: Happy Turtle 1.0.46860: This is the second beta release of the SVN based version incrementor. Please feel free to create a thread in the discussion tabs and provide feedb...Height Map to 3D World at XNA: 3DWorld: Just open .rar file and extract it any folder and run Proje2Dto3D.exe file.HTML Ruby: 6.20.2: Removed rubyLineSpace option Improved options panel Fixed ruby text font-size rendering issue with complex ruby annotation Removed more waste...HTML Ruby: 6.20.3: Removed unused code Temporary partial fix for Firefox 3.7a4pre nightly buildHTML Ruby: 6.21.0: Added support for current HTML5 ruby annotation format. All ruby annotations are converted to XHTML 1.1 complex ruby annotation.Kooboo HTML form: Kooboo HTML Form Module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo Menu: Kooboo CMS Menu for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo Meta: Kooboo Meta Module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo PageMenu: Kooboo CMS PageMenu for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo Search: Kooboo CMS Search module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Numina Application/Security Framework: Numina.Framework Core 50212: Added bulk import user page Added General settings page for updating Company Name, Theme, and API Key Add/Edit application calls Full URL to h...Rawr: Rawr 2.3.14: - Rawr3: Tons of fixes for Rawr3 compatability and UI. - Significant performance improvements all around. - More fixes and improvements to Wowhea...Rich Ajax empowered Web/Cloud Applications: 6.4 beta 2: The first fully featured version of Visual webGui offering web/cloud development tool that puts all ASP.NET Ajax limits behind with enhanced perfor...SharePoint User Management WebPart: User Management Web part 1.0: Most of the organization have one SharePoint Site which is configured with windows authenticated which is for internal employees having AD authenti...SkeinLibManaged: SkeinLibManaged 1.1.0.0 (Beta): This is the compiled DLL with XML documentation, so there should be plenty of context sensitive help and Intellisense. This is the Release version,...VCC: Latest build, v2.1.30411.0: Automatic drop of latest buildVFPX: Code References 1.1 Beta: Visit the Code References Info Page for complete information about this release.VisioAutomation: VisioAutomation 2.5.0: VisioAutomation 2.5.0- General cleanup/bugfixes - Many low-level changes the the VisioAutomation extension methods - these are far fewer now - This...Visual Studio DSite: English To Spanish Translator (Visual C++ 2008): A simple english to spanish translator made in visual c 2008, using the Google Translate API.WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.10.00: Whats NewFile Browser: Inherits Folder Permissions from DotNetNuke Updated the Editor to Version 3.2.1 revision 5372 Added CkEditor jQuery Adap...Web/Cloud Applications Development Framework | Visual WebGui: 6.4 beta 2: The first fully featured version of Visual webGui offering web/cloud development tool that puts all ASP.NET Ajax limits behind with unique develope...WPF Data Virtualization: 1.0.0.0: First ReleaseYasbg: Yasbg Alpha: ReadmeYet Another Static Blog Generator is a command line utility that generates static html files for blogs. Currently, it is NOT feed enabled. I...異世界の新着動画: Ver. 10-04-12: ニコ生の仕様変更に対応アンケート時間の設定追加Most Popular ProjectsWBFS ManagerRawrASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsRawrnopCommerce. Open Source online shop e-commerce solution.AutoPocopatterns & practices – Enterprise LibraryShweet: SharePoint 2010 Team Messaging built with PexFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog ModuleIonics Isapi Rewrite FilterBlogEngine.NETBeanProxy

Read the article
Back to Basics: When does a .NET Assembly Dependency get loaded

- by Rick Strahl

When we work on typical day to day applications, it's easy to forget some of the core features of the .NET framework. For me personally it's been a long time since I've learned about some of the underlying CLR system level services even though I rely on them on a daily basis. I often think only about high level application constructs and/or high level framework functionality, but the low level stuff is often just taken for granted. Over the last week at DevConnections I had all sorts of low level discussions with other developers about the inner workings of this or that technology (especially in light of my Low Level ASP.NET Architecture talk and the Razor Hosting talk). One topic that came up a couple of times and ended up a point of confusion even amongst some seasoned developers (including some folks from Microsoft <snicker>) is when assemblies actually load into a .NET process. There are a number of different ways that assemblies are loaded in .NET. When you create a typical project assemblies usually come from: The Assembly reference list of the top level 'executable' project The Assembly references of referenced projects Dynamically loaded at runtime via AppDomain/Reflection loading In addition .NET automatically loads mscorlib (most of the System namespace) the boot process that hosts the .NET runtime in EXE apps, or some other kind of runtime hosting environment (runtime hosting in servers like IIS, SQL Server or COM Interop). In hosting environments the runtime host may also pre-load a bunch of assemblies on its own (for example the ASP.NET host requires all sorts of assemblies just to run itself, before ever routing into your user specific code). Assembly Loading The most obvious source of loaded assemblies is the top level application's assembly reference list. You can add assembly references to a top level application and those assembly references are then available to the application. In a nutshell, referenced assemblies are not immediately loaded - they are loaded on the fly as needed. So regardless of whether you have an assembly reference in a top level project, or a dependent assembly assemblies typically load on an as needed basis, unless explicitly loaded by user code. The same is true of dependent assemblies. To check this out I ran a simple test: I have a utility assembly Westwind.Utilities which is a general purpose library that can work in any type of project. Due to a couple of small requirements for encoding and a logging piece that allows logging Web content (dependency on HttpContext.Current) this utility library has a dependency on System.Web. Now System.Web is a pretty large assembly and generally you'd want to avoid adding it to a non-Web project if it can be helped. So I created a Console Application that loads my utility library: You can see that the top level Console app a reference to Westwind.Utilities and System.Data (beyond the core .NET libs). The Westwind.Utilities project on the other hand has quite a few dependencies including System.Web. I then add a main program that accesses only a simple utillity method in the Westwind.Utilities library that doesn't require any of the classes that access System.Web: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.ReadLine(); } StringUtils.NewStringId() calls into Westwind.Utilities, but it doesn't rely on System.Web. Any guesses what the assembly list looks like when I stop the code on the ReadLine() command? I'll wait here while you think about it… … … So, when I stop on ReadLine() and then fire up Process Explorer and check the assembly list I get: We can see here that .NET has not actually loaded any of the dependencies of the Westwind.Utilities assembly. Also not loaded is the top level System.Data reference even though it's in the dependent assembly list of the top level project. Since this particular function I called only uses core System functionality (contained in mscorlib) there's in fact nothing else loaded beyond the main application and my Westwind.Utilities assembly that contains the method accessed. None of the dependencies of Westwind.Utilities loaded. If you were to open the assembly in a disassembler like Reflector or ILSpy, you would however see all the compiled in dependencies. The referenced assemblies are in the dependency list and they are loadable, but they are not immediately loaded by the application. In other words the C# compiler and .NET linker are smart enough to figure out the dependencies based on the code that actually is referenced from your application and any dependencies cascading down into the dependencies from your top level application into the referenced assemblies. In the example above the usage requirement is pretty obvious since I'm only calling a single static method and then exiting the app, but in more complex applications these dependency relationships become very complicated - however it's all taken care of by the compiler and linker figuring out what types and members are actually referenced and including only those assemblies that are in fact referenced in your code or required by any of your dependencies. The good news here is: That if you are referencing an assembly that has a dependency on something like System.Web in a few places that are not actually accessed by any of your code or any dependent assembly code that you are calling, that assembly is never loaded into memory! Some Hosting Environments pre-load Assemblies The load behavior can vary however. In Console and desktop applications we have full control over assembly loading so we see the core CLR behavior. However other environments like ASP.NET for example will preload referenced assemblies explicitly as part of the startup process - primarily to minimize load conflicts. Specifically ASP.NET pre-loads all assemblies referenced in the assembly list and the /bin folder. So in Web applications it definitely pays to minimize your top level assemblies if they are not used. Understanding when Assemblies Load To clarify and see it actually happen what I described in the first example , let's look at a couple of other scenarios. To see assemblies loading at runtime in real time lets create a utility function to print out loaded assemblies to the console: public static void PrintAssemblies() { var assemblies = AppDomain.CurrentDomain.GetAssemblies(); foreach (var assembly in assemblies) { Console.WriteLine(assembly.GetName()); } } Now let's look at the first scenario where I have class method that references internally uses System.Web. In the first scenario lets add a method to my main program like this: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.ReadLine(); PrintAssemblies(); } public static void WebLogEntry() { var entry = new WebLogEntry(); entry.UpdateFromRequest(); Console.WriteLine(entry.QueryString); } UpdateFromWebRequest() internally accesses HttpContext.Current to read some information of the ASP.NET Request object so it clearly needs a reference System.Web to work. In this first example, the method that holds the calling code is never called, but exists as a static method that can potentially be called externally at some point. What do you think will happen here with the assembly loading? Will System.Web load in this example? No - it doesn't. Because the WebLogEntry() method is never called by the mainline application (or anywhere else) System.Web is not loaded. .NET dynamically loads assemblies as code that needs it is called. No code references the WebLogEntry() method and so System.Web is never loaded. Next, let's add the call to this method, which should trigger System.Web to be loaded because a dependency exists. Let's change the code to: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.WriteLine("--- Before:"); PrintAssemblies(); WebLogEntry(); Console.WriteLine("--- After:"); PrintAssemblies(); Console.ReadLine(); } public static void WebLogEntry() { var entry = new WebLogEntry(); entry.UpdateFromRequest(); Console.WriteLine(entry.QueryString); } Looking at the code now, when do you think System.Web will be loaded? Will the before list include it? Yup System.Web gets loaded, but only after it's actually referenced. In fact, just until before the call to UpdateFromRequest() System.Web is not loaded - it only loads when the method is actually called and requires the reference in the executing code. Moral of the Story So what have we learned - or maybe remembered again? Dependent Assembly References are not pre-loaded when an application starts (by default) Dependent Assemblies that are not referenced by executing code are never loaded Dependent Assemblies are just in time loaded when first referenced in code All of this is nothing new - .NET has always worked like this. But it's good to have a refresher now and then and go through the exercise of seeing it work in action. It's not one of those things we think about everyday, and as I found out last week, I couldn't remember exactly how it worked since it's been so long since I've learned about this. And apparently I'm not the only one as several other people I had discussions with in relation to loaded assemblies also didn't recall exactly what should happen or assumed incorrectly that just having a reference automatically loads the assembly. The moral of the story for me is: Trying at all costs to eliminate an assembly reference from a component is not quite as important as it's often made out to be. For example, the Westwind.Utilities module described above has a logging component, including a Web specific logging entry that supports pulling information from the active HTTP Context. Adding that feature requires a reference to System.Web. Should I worry about this in the scope of this library? Probably not, because if I don't use that one class of nearly a hundred, System.Web never gets pulled into the parent process. IOW, System.Web only loads when I use that specific feature and if I am, well I clearly have to be running in a Web environment anyway to use it realistically. The alternative would be considerably uglier: Pulling out the WebLogEntry class and sticking it into another assembly and breaking up the logging code. In this case - definitely not worth it. So, .NET definitely goes through some pretty nifty optimizations to ensure that it loads only what it needs and in most cases you can just rely on .NET to do the right thing. Sometimes though assembly loading can go wrong (especially when signed and versioned local assemblies are involved), but that's subject for a whole other post…© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET CSharp Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article
Cloud Based Load Testing Using TF Service & VS 2013

- by Tarun Arora [Microsoft MVP]

Originally posted on: http://geekswithblogs.net/TarunArora/archive/2013/06/30/cloud-based-load-testing-using-tf-service-amp-vs-2013.aspx One of the new features announced as part of the Visual Studio 2013 Ultimate Preview is ‘Cloud Based Load Testing’. In this blog post I’ll walk you through, What is Cloud Based Load Testing? How have I been using this feature? – Success story! Where can you find more resources on this feature? What is Cloud Based Load Testing? It goes without saying that performance testing your application not only gives you the confidence that the application will work under heavy levels of stress but also gives you the ability to test how scalable the architecture of your application is. It is important to know how much is too much for your application! Working with various clients in the industry I have realized that the biggest barriers in Load Testing & Performance Testing adoption are, High infrastructure and administration cost that comes with this phase of testing Time taken to procure & set up the test infrastructure Finding use for this infrastructure investment after completion of testing Is cloud the answer? 100% Visual Studio Compatible Scalable and Realistic Start testing in < 2 minutes Intuitive Pay only for what you need Use existing on premise tests on cloud There are a lot of vendors out there offering Cloud Based Load Testing, to name a few, Load Storm Soasta Blaze Meter Blitz And others… The question you may want to ask is, why should you go with Microsoft’s Cloud based Load Test offering. If you are a Microsoft shop or already have investments in Microsoft technologies, you’ll see great benefit in the natural integration this offers with existing Microsoft products such as Visual Studio and Windows Azure. For example, your existing Web tests authored in Visual Studio 2010 or Visual Studio 2012 will run on the cloud without requiring any modifications what so ever. Microsoft’s cloud test rig also supports API based testing, for example, if you are building a WPF application which consumes WCF services, you can write unit tests to invoke the WCF service, these tests can be run on the cloud test rig and loaded with ‘N’ concurrent users for performance testing. If you have your assets already hosted in the Azure and possibly in the same data centre as the Cloud test rig, your Azure app will not incur a usage cost because of the generated traffic since the traffic is coming from the same data centre. The licensing or pricing information on Microsoft’s cloud based Load test service is yet to be announced, but I would expect this to be priced attractively to match the market competition. The only additional configuration required for running load tests on Microsoft Cloud based Load Tests service is to select the Test run location as Run tests using Visual Studio Team Foundation Service, How have I been using Microsoft’s Cloud based Load Test Service? I have been part of the Microsoft Cloud Based Load Test Service advisory council for the last 7 months. This gave the opportunity to see the product shape up from concept to working solution. I was also the first person outside of Microsoft to try this offering out. This gave me the opportunity to test real world application at various clients using the Microsoft Load Test Service and provide real world feedback to the Microsoft product team. One of the most recent systems I tested using the Load Test Service has been an insurance quote generation engine. This insurance quote generation engine is, hosted in Windows Azure expected to get quote requests from across the globe expected to handle 5 Million quote requests in a day (not clear how this load will be distributed across the day) There was no way, I could simulate such kind of load from on premise without standing up additional hardware. But Microsoft’s Cloud based Load Test service allowed me to test my key performance testing scenarios, i.e. Simulate expected Load, Endurance Testing, Threshold Testing and Testing for Latency. Simulating expected load: approach to devising a load pattern My approach to devising a load test pattern has been to run the test scenario with 1 user to figure out the response time. Then work out how many users are required to reach the target load. So, for example, to invoke 1 quote from the quote engine software takes 0.5 seconds. Now if you do the math, 1 quote request by 1 user = 0.5 seconds quotes generated by 1 user in 24 hour = 1 * (((2 * 60) * 60) * 24) = 172,800 quotes generated by 30 users in 24 hours = 172,800 * 30 = 5,184,000 This was a very simple example, if your application requires more concurrent users to test scenario’s such as caching, etc then you can devise your own load pattern, some examples of load test patterns can be found here. Endurance Testing To test for endurance, I loaded the quote generation engine with an expected fixed user load and ran the test for very long duration such as over 48 hours and observed the affect of the long running test on the Azure infrastructure. Currently Microsoft Load Test service does not support metrics from the machine under test. I used Azure diagnostics to begin with, but later started using Cerebrata Azure Diagnostics Manager to capture the metrics of the machine under test. Threshold Testing To figure out how much user load the application could cope with before falling on its belly, I opted to step load the quote generation engine by incrementing user load with different variations of incremental user load per minute till the application crashed out and forced an IIS reset. Testing for Latency Currently the Microsoft Load Test service does not support generating geographically distributed load, I however, deployed the insurance quote generation engine in different Azure data centres and ran the same set of performance tests to measure for latency. Because I could compare load test results from different runs by exporting the results to excel (this feature is provided out of the box right from Visual Studio 2010) I could see the different in response times. More resources on Microsoft Cloud based Load Test Service A few important links to get you started, Download Visual Studio Ultimate 2013 Preview Getting started guide for load testing using Team Foundation Service Troubleshooting guide for FAQs and known issues Team Foundation Service forum for questions and support Detailed demo and presentation (link to Tech-Ed session recording) Detailed demo and presentation (link to Build session recording) There a few limits on the usage of Microsoft Cloud based Load Test service that you can read about here. If you have any feedback on Microsoft Cloud based Load Test service, feel free to share it with the product team via the Visual Studio User Voice forum. I hope you found this useful. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

Read the article
SSIS Lookup component tuning tips

- by jamiet

Yesterday evening I attended a London meeting of the UK SQL Server User Group at Microsoft’s offices in London Victoria. As usual it was both a fun and informative evening and in particular there seemed to be a few questions arising about tuning the SSIS Lookup component; I rattled off some comments and figured it would be prudent to drop some of them into a dedicated blog post, hence the one you are reading right now. Scene setting A popular pattern in SSIS is to use a Lookup component to determine whether a record in the pipeline already exists in the intended destination table or not and I cover this pattern in my 2006 blog post Checking if a row exists and if it does, has it changed? (note to self: must rewrite that blog post for SSIS2008). Fundamentally the SSIS lookup component (when using FullCache option) sucks some data out of a database and holds it in memory so that it can be compared to data in the pipeline. One of the big benefits of using SSIS dataflows is that they process data one buffer at a time; that means that not all of the data from your source exists in the dataflow at the same time and is why a SSIS dataflow can process data volumes that far exceed the available memory. However, that only applies to data in the pipeline; for reasons that are hopefully obvious ALL of the data in the lookup set must exist in the memory cache for the duration of the dataflow’s execution which means that any memory used by the lookup cache will not be available to be used as a pipeline buffer. Moreover, there’s an obvious correlation between the amount of data in the lookup cache and the time it takes to charge that cache; the more data you have then the longer it will take to charge and the longer you have to wait until the dataflow actually starts to do anything. For these reasons your goal is simple: ensure that the lookup cache contains as little data as possible. General tips Here is a simple tick list you can follow in order to tune your lookups: Use a SQL statement to charge your cache, don’t just pick a table from the dropdown list made available to you. (Read why in SELECT *... or select from a dropdown in an OLE DB Source component?) Only pick the columns that you need, ignore everything else Make the database columns that your cache is populated from as narrow as possible. If a column is defined as VARCHAR(20) then SSIS will allocate 20 bytes for every value in that column – that is a big waste if the actual values are significantly less than 20 characters in length. Do you need DT_WSTR typed columns or will DT_STR suffice? DT_WSTR uses twice the amount of space to hold values that can be stored using a DT_STR so if you can use DT_STR, consider doing so. Same principle goes for the numerical datatypes DT_I2/DT_I4/DT_I8. Only populate the cache with data that you KNOW you will need. In other words, think about your WHERE clause! Thinking outside the box It is tempting to build a large monolithic dataflow that does many things, one of which is a Lookup. Often though you can make better use of your available resources by, well, mixing things up a little and here are a few ideas to get your creative juices flowing: There is no rule that says everything has to happen in a single dataflow. If you have some particularly resource intensive lookups then consider putting that lookup into a dataflow all of its own and using raw files to pass the pipeline data in and out of that dataflow. Know your data. If you think, for example, that the majority of your incoming rows will match with only a small subset of your lookup data then consider chaining multiple lookup components together; the first would use a FullCache containing that data subset and the remaining data that doesn’t find a match could be passed to a second lookup that perhaps uses a NoCache lookup thus negating the need to pull all of that least-used lookup data into memory. Do you need to process all of your incoming data all at once? If you can process different partitions of your data separately then you can partition your lookup cache as well. For example, if you are using a lookup to convert a location into a [LocationId] then why not process your data one region at a time? This will mean your lookup cache only has to contain data for the location that you are currently processing and with the ability of the Lookup in SSIS2008 and beyond to charge the cache using a dynamically built SQL statement you’ll be able to achieve it using the same dataflow and simply loop over it using a ForEach loop. Taking the previous data partitioning idea further … a dataflow can contain more than one data path so why not split your data using a conditional split component and, again, charge your lookup caches with only the data that they need for that partition. Lookups have two uses: to (1) find a matching row from the lookup set and (2) put attributes from that matching row into the pipeline. Ask yourself, do you need to do these two things at the same time? After all once you have the key column(s) from your lookup set then you can use that key to get the rest of attributes further downstream, perhaps even in another dataflow. Are you using the same lookup data set multiple times? If so, consider the file caching option in SSIS 2008 and beyond. Above all, experiment and be creative with different combinations. You may be surprised at what works. Final thoughts If you want to know more about how the Lookup component differs in SSIS2008 from SSIS2005 then I have a dedicated blog post about that at Lookup component gets a makeover. I am on a mini-crusade at the moment to get a BULK MERGE feature into the database engine, the thinking being that if the database engine can quickly merge massive amounts of data in a similar manner to how it can insert massive amounts using BULK INSERT then that’s a lot of work that wouldn’t have to be done in the SSIS pipeline. If you think that is a good idea then go and vote for BULK MERGE on Connect. If you have any other tips to share then please stick them in the comments. Hope this helps! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article
Calling Web Service Functions Asynchronously from a Web Page

- by SGWellens

Over on the Asp.Net forums where I moderate, a user had a problem calling a Web Service from a web page asynchronously. I tried his code on my machine and was able to reproduce the problem. I was able to solve his problem, but only after taking the long scenic route through some of the more perplexing nuances of Web Services and Proxies. Here is the fascinating story of that journey. Start with a simple Web Service public class Service1 : System.Web.Services.WebService { [WebMethod] public string HelloWorld() { // sleep 10 seconds System.Threading.Thread.Sleep(10 * 1000); return "Hello World"; } } The 10 second delay is added to make calling an asynchronous function more apparent. If you don't call the function asynchronously, it takes about 10 seconds for the page to be rendered back to the client. If the call is made from a Windows Forms application, the application freezes for about 10 seconds. Add the web service to a web site. Right-click the project and select "Add Web Reference…" Next, create a web page to call the Web Service. Note: An asp.net web page that calls an 'Async' method must have the Async property set to true in the page's header: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" Async='true' %> Here is the code to create the Web Service proxy and connect the event handler. Shrewdly, we make the proxy object a member of the Page class so it remains instantiated between the various events. public partial class _Default : System.Web.UI.Page { localhost.Service1 MyService; // web service proxy // ---- Page_Load --------------------------------- protected void Page_Load(object sender, EventArgs e) { MyService = new localhost.Service1(); MyService.HelloWorldCompleted += EventHandler; } Here is the code to invoke the web service and handle the event: // ---- Async and EventHandler (delayed render) -------------------------- protected void ButtonHelloWorldAsync_Click(object sender, EventArgs e) { // blocks ODS("Pre HelloWorldAsync..."); MyService.HelloWorldAsync(); ODS("Post HelloWorldAsync"); } public void EventHandler(object sender, localhost.HelloWorldCompletedEventArgs e) { ODS("EventHandler"); ODS(" " + e.Result); } // ---- ODS ------------------------------------------------ // // Helper function: Output Debug String public static void ODS(string Msg) { String Out = String.Format("{0} {1}", DateTime.Now.ToString("hh:mm:ss.ff"), Msg); System.Diagnostics.Debug.WriteLine(Out); } I added a utility function I use a lot: ODS (Output Debug String). Rather than include the library it is part of, I included it in the source file to keep this example simple. Fire up the project, open up a debug output window, press the button and we get this in the debug output window: 11:29:37.94 Pre HelloWorldAsync... 11:29:37.94 Post HelloWorldAsync 11:29:48.94 EventHandler 11:29:48.94 Hello World Sweet. The asynchronous call was made and returned immediately. About 10 seconds later, the event handler fires and we get the result. Perfect….right? Not so fast cowboy. Watch the browser during the call: What the heck? The page is waiting for 10 seconds. Even though the asynchronous call returned immediately, Asp.Net is waiting for the event to fire before it renders the page. This is NOT what we wanted. I experimented with several techniques to work around this issue. Some may erroneously describe my behavior as 'hacking' but, since no ingesting of Twinkies was involved, I do not believe hacking is the appropriate term. If you examine the proxy that was automatically created, you will find a synchronous call to HelloWorld along with an additional set of methods to make asynchronous calls. I tried the other asynchronous method supplied in the proxy: // ---- Begin and CallBack ---------------------------------- protected void ButtonBeginHelloWorld_Click(object sender, EventArgs e) { ODS("Pre BeginHelloWorld..."); MyService.BeginHelloWorld(AsyncCallback, null); ODS("Post BeginHelloWorld"); } public void AsyncCallback(IAsyncResult ar) { String Result = MyService.EndHelloWorld(ar); ODS("AsyncCallback"); ODS(" " + Result); } The BeginHelloWorld function in the proxy requires a callback function as a parameter. I tested it and the debug output window looked like this: 04:40:58.57 Pre BeginHelloWorld... 04:40:58.57 Post BeginHelloWorld 04:41:08.58 AsyncCallback 04:41:08.58 Hello World It works the same as before except for one critical difference: The page rendered immediately after the function call. I was worried the page object would be disposed after rendering the page but the system was smart enough to keep the page object in memory to handle the callback. Both techniques have a use: Delayed Render: Say you want to verify a credit card, look up shipping costs and confirm if an item is in stock. You could have three web service calls running in parallel and not render the page until all were finished. Nice. You can send information back to the client as part of the rendered page when all the services are finished. Immediate Render: Say you just want to start a service running and return to the client. You can do that too. However, the page gets sent to the client before the service has finished running so you will not be able to update parts of the page when the service finishes running. Summary: YourFunctionAsync() and an EventHandler will not render the page until the handler fires. BeginYourFunction() and a CallBack function will render the page as soon as possible. I found all this to be quite interesting and did a lot of searching and researching for documentation on this subject….but there isn't a lot out there. The biggest clues are the parameters that can be sent to the WSDL.exe program: http://msdn.microsoft.com/en-us/library/7h3ystb6(VS.100).aspx Two parameters are oldAsync and newAsync. OldAsync will create the Begin/End functions; newAsync will create the Async/Event functions. Caveat: I haven't tried this but it was stated in this article. I'll leave confirming this as an exercise for the student J. Included Code: I'm including the complete test project I created to verify the findings. The project was created with VS 2008 SP1. There is a solution file with 3 projects, the 3 projects are: Web Service Asp.Net Application Windows Forms Application To decide which program runs, you right-click a project and select "Set as Startup Project". I created and played with the Windows Forms application to see if it would reveal any secrets. I found that in the Windows Forms application, the generated proxy did NOT include the Begin/Callback functions. Those functions are only generated for Asp.Net pages. Probably for the reasons discussed earlier. Maybe those Microsoft boys and girls know what they are doing. I hope someone finds this useful. Steve Wellens

Read the article
SQL SERVER – Guest Posts – Feodor Georgiev – The Context of Our Database Environment – Going Beyond the Internal SQL Server Waits – Wait Type – Day 21 of 28

- by pinaldave

This guest post is submitted by Feodor. Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. In this article Feodor explains the server-client-server process, and concentrated on the mutual waits between client and SQL Server. This is essential in grasping the concept of waits in a ‘global’ application plan. Recently I was asked to write a blog post about the wait statistics in SQL Server and since I had been thinking about writing it for quite some time now, here it is. It is a wide-spread idea that the wait statistics in SQL Server will tell you everything about your performance. Well, almost. Or should I say – barely. The reason for this is that SQL Server is always a part of a bigger system – there are always other players in the game: whether it is a client application, web service, any other kind of data import/export process and so on. In short, the SQL Server surroundings look like this: This means that SQL Server, aside from its internal waits, also depends on external waits and settings. As we can see in the picture above, SQL Server needs to have an interface in order to communicate with the surrounding clients over the network. For this communication, SQL Server uses protocol interfaces. I will not go into detail about which protocols are best, but you can read this article. Also, review the information about the TDS (Tabular data stream). As we all know, our system is only as fast as its slowest component. This means that when we look at our environment as a whole, the SQL Server might be a victim of external pressure, no matter how well we have tuned our database server performance. Let’s dive into an example: let’s say that we have a web server, hosting a web application which is using data from our SQL Server, hosted on another server. The network card of the web server for some reason is malfunctioning (think of a hardware failure, driver failure, or just improper setup) and does not send/receive data faster than 10Mbs. On the other end, our SQL Server will not be able to send/receive data at a faster rate either. This means that the application users will notify the support team and will say: “My data is coming very slow.” Now, let’s move on to a bit more exciting example: imagine that there is a similar setup as the example above – one web server and one database server, and the application is not using any stored procedure calls, but instead for every user request the application is sending 80kb query over the network to the SQL Server. (I really thought this does not happen in real life until I saw it one day.) So, what happens in this case? To make things worse, let’s say that the 80kb query text is submitted from the application to the SQL Server at least 100 times per minute, and as often as 300 times per minute in peak times. Here is what happens: in order for this query to reach the SQL Server, it will have to be broken into a of number network packets (according to the packet size settings) – and will travel over the network. On the other side, our SQL Server network card will receive the packets, will pass them to our network layer, the packets will get assembled, and eventually SQL Server will start processing the query – parsing, allegorizing, generating the query execution plan and so on. So far, we have already had a serious network overhead by waiting for the packets to reach our Database Engine. There will certainly be some processing overhead – until the database engine deals with the 80kb query and its 20 subqueries. The waits you see in the DMVs are actually collected from the point the query reaches the SQL Server and the packets are assembled. Let’s say that our query is processed and it finally returns 15000 rows. These rows have a certain size as well, depending on the data types returned. This means that the data will have converted to packages (depending on the network size package settings) and will have to reach the application server. There will also be waits, however, this time you will be able to see a wait type in the DMVs called ASYNC_NETWORK_IO. What this wait type indicates is that the client is not consuming the data fast enough and the network buffers are filling up. Recently Pinal Dave posted a blog on Client Statistics. What Client Statistics does is captures the physical flow characteristics of the query between the client(Management Studio, in this case) and the server and back to the client. As you see in the image, there are three categories: Query Profile Statistics, Network Statistics and Time Statistics. Number of server roundtrips–a roundtrip consists of a request sent to the server and a reply from the server to the client. For example, if your query has three select statements, and they are separated by ‘GO’ command, then there will be three different roundtrips. TDS Packets sent from the client – TDS (tabular data stream) is the language which SQL Server speaks, and in order for applications to communicate with SQL Server, they need to pack the requests in TDS packets. TDS Packets sent from the client is the number of packets sent from the client; in case the request is large, then it may need more buffers, and eventually might even need more server roundtrips. TDS packets received from server –is the TDS packets sent by the server to the client during the query execution. Bytes sent from client – is the volume of the data set to our SQL Server, measured in bytes; i.e. how big of a query we have sent to the SQL Server. This is why it is best to use stored procedures, since the reusable code (which already exists as an object in the SQL Server) will only be called as a name of procedure + parameters, and this will minimize the network pressure. Bytes received from server – is the amount of data the SQL Server has sent to the client, measured in bytes. Depending on the number of rows and the datatypes involved, this number will vary. But still, think about the network load when you request data from SQL Server. Client processing time – is the amount of time spent in milliseconds between the first received response packet and the last received response packet by the client. Wait time on server replies – is the time in milliseconds between the last request packet which left the client and the first response packet which came back from the server to the client. Total execution time – is the sum of client processing time and wait time on server replies (the SQL Server internal processing time) Here is an illustration of the Client-server communication model which should help you understand the mutual waits in a client-server environment. Keep in mind that a query with a large ‘wait time on server replies’ means the server took a long time to produce the very first row. This is usual on queries that have operators that need the entire sub-query to evaluate before they proceed (for example, sort and top operators). However, a query with a very short ‘wait time on server replies’ means that the query was able to return the first row fast. However a long ‘client processing time’ does not necessarily imply the client spent a lot of time processing and the server was blocked waiting on the client. It can simply mean that the server continued to return rows from the result and this is how long it took until the very last row was returned. The bottom line is that developers and DBAs should work together and think carefully of the resource utilization in the client-server environment. From experience I can say that so far I have seen only cases when the application developers and the Database developers are on their own and do not ask questions about the other party’s world. I would recommend using the Client Statistics tool during new development to track the performance of the queries, and also to find a synchronous way of utilizing resources between the client – server – client. Here is another example: think about similar setup as above, but add another server to the game. Let’s say that we keep our media on a separate server, and together with the data from our SQL Server we need to display some images on the webpage requested by our user. No matter how simple or complicated the logic to get the images is, if the images are 500kb each our users will get the page slowly and they will still think that there is something wrong with our data. Anyway, I don’t mean to get carried away too far from SQL Server. Instead, what I would like to say is that DBAs should also be aware of ‘the big picture’. I wrote a blog post a while back on this topic, and if you are interested, you can read it here about the big picture. And finally, here are some guidelines for monitoring the network performance and improving it: Run a trace and outline all queries that return more than 1000 rows (in Profiler you can actually filter and sort the captured trace by number of returned rows). This is not a set number; it is more of a guideline. The general thought is that no application user can consume that many rows at once. Ask yourself and your fellow-developers: ‘why?’. Monitor your network counters in Perfmon: Network Interface:Output queue length, Redirector:Network errors/sec, TCPv4: Segments retransmitted/sec and so on. Make sure to establish a good friendship with your network administrator (buy them coffee, for example J ) and get into a conversation about the network settings. Have them explain to you how the network cards are setup – are they standalone, are they ‘teamed’, what are the settings – full duplex and so on. Find some time to read a bit about networking. In this short blog post I hope I have turned your attention to ‘the big picture’ and the fact that there are other factors affecting our SQL Server, aside from its internal workings. As a further reading I would still highly recommend the Wait Stats series on this blog, also I would recommend you have the coffee break conversation with your network admin as soon as possible. This guest post is written by Feodor Georgiev. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL

Read the article
Stream Music and Video Over the Internet with Windows Media Player 12

- by DigitalGeekery

A new feature in Windows Media Player 12, which is included with Windows 7, is being able to stream media over the web to other Windows 7 computers. Today we will take a look at how to set it up and what you need to begin. Note: You will need to perform this process on each computer that you want to use. What You’ll Need Two computers running Windows 7 Home Premium, Professional, or Ultimate. The host, or home computer that you will be streaming the media from, cannot be on a public network or part of domain. Windows Live ID UPnP or Port Forwarding enabled on your home router Media files added to your Windows Media Player library Windows Live ID Sign up online for a Windows Live ID if you do not already have one. See the link below for a link to Windows Live. Configuring the Windows 7 Computers Open Windows Media Player and go to the library section. Click on Stream and then “Allow Internet access to home media.” The Internet Home Media Access pop up window will prompt you to link your Windows Live ID to a user account. Click “Link an online ID.” If you haven’t already installed the Windows Live ID Sign-In Assistant, you will be taken to Microsoft’s website and prompted to download it. Once you have completed the Windows Live download assistant install, you will see Windows Live ID online provider appear in the “Link Online IDs” window. Click on “Link Online ID.” Next, you’ll be prompted for a Windows Live ID and password. Enter your Windows Live ID and password and click “Sign In.” A pop up window will notify you that you have successfully allowed Internet access to home media. Now, you will have to repeat the exact same configuration on the 2nd Windows 7 computer. Once you have completed the same configuration on your 2nd computer, you might also need to configure your home router for port forwarding. If your router supports UPnP, you may not need to manually forward any ports on your router. So, this would be a good time to test your connection. Go to a nearby hotspot, or perhaps a neighbor’s house, and test to see if you can stream your media. If not, you’ll need to manually forward the ports. You can always choose to forward the ports anyway, just in case. Note: We tested on a Linksys WRT54GL router, which supports UPnP, and found we still needed to manually forward the ports. Finding the ports to forward on the router Open Windows Media Player and make sure you are in Library view. Click on “Stream” on the top menu, and select “Allow Internet access to home media.” On the “Internet Home Media Access” window, click on “Diagnose connections.” The “Internet Streaming Diagnostic Tool” will pop up. Click on “Port forwarding information” near the bottom. On the “Port Forwarding Information” window you will find both the Internal and External Port numbers you will need to forward on your router. The Internal port number should always be 10245. The external number will be different depending on your computer. Microsoft also recommends forwarding port 443. Configuring the Router Next, you’ll need to configure Port Forwarding on your home router. We will show you the steps for a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Administration Tab along the top, click the “Applications & Gaming Tab, and then the “Port Range Forward” tab below it. Under “Application,” type in a name. It can be any name you choose. In both the “Start” and “End” boxes, type the port number. Enter the IP address of your home computer in the IP address column. Click the check box under “Enable.” Do this for both the internal and external port numbers and port 443. When finished, click the “Save Settings” button. Note: It’s highly recommended that you configure your home computer with a static IP address When you’re ready to play your media over the Internet, open up Windows Media Player and look for your host computer and username listed under “Other Libraries.” Click on it expand the list to see your media libraries. Choose a library and a file to play. Now you can enjoy your streaming media over the Internet. Conclusion We found media streaming over the Internet to work fairly well. However, we did see a loss of quality with streaming video. Also, Recorded TV .wtv and dvr-ms files did not play at all. Check out our previous article to see how to stream media share and stream media between Windows 7 computers on your home network. Similar Articles Productive Geek Tips Enable Media Streaming in Windows Home Server to Windows Media PlayerFixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Share and Stream Digital Media Between Windows 7 Machines On Your Home NetworkLearning Windows 7: Manage Your Music with Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox)

Read the article
Getting Started with ASP.NET Membership, Profile and RoleManager

- by Ben Griswold

A new ASP.NET MVC project includes preconfigured Membership, Profile and RoleManager providers right out of the box. Try it yourself – create a ASP.NET MVC application, crack open the web.config file and have a look. First, you’ll find the ApplicationServices database connection: <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> Notice the connection string is referencing the aspnetdb.mdf database hosted by SQL Express and it’s using integrated security so it’ll just work for you without having to call out a specific database login or anything. Scroll down the file a bit and you’ll find each of the three noted sections: <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/" /> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/" /> </providers> </profile> <roleManager enabled="false"> <providers> <clear /> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </roleManager> Really. It’s all there. Still don’t believe me. Run the application, walk through the registration process and finally login and logout. Completely functional – and you didn’t have to do a thing! What else? Well, you can manage your users via the Configuration Manager which is hiding in Visual Studio behind Projects > ASP.NET Configuration. The ASP.NET Web Site Administration Tool isn’t MVC-specific (neither is the Membership, Profile or RoleManager stuff) but it’s neat and I hardly ever see anyone using it. Here you can set up and edit users, roles, and set access permissions for your site. You can manage application settings, establish your SMTP settings, configure debugging and tracing, define default error page and even take your application offline. The UI is rather plain-Jane but it works great. And here’s the best of all. Let’s say you, like most of us, don’t want to run your application on top of the aspnetdb.mdf database. Let’s suppose you want to use your own database and you’d like to add the membership stuff to it. Well, that’s easy enough. Take a look inside your [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\ folder. Here you’ll find a bunch of files. If you were to run the InstallCommon.sql, InstallMembership.sql, InstallRoles.sql and InstallProfile.sql files against the database of your choices, you’d be installing the same membership, profile and role artifacts which are found in the aspnet.db to your own database. Too much trouble? Okay. Run [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\aspnet_regsql.exe from the command line instead. This will launch the ASP.NET SQL Server Setup Wizard which walks you through the installation of those same database objects into the new or existing database of your choice. You may not always have the luxury of using this tool on your destination server, but you should use it whenever you can. Last tip: don’t forget to update the ApplicationServices connectionstring to point to your custom database after the setup is complete. At the risk of sounding like a smarty, everything I’ve mentioned in this post has been around for quite a while. The thing is that not everyone has had the opportunity to use it. And it makes sense. I know I’ve worked on projects which used custom membership services. Why bother with the out-of-the-box stuff, right? And the .NET framework is so massive, who can know it all. Well, eventually you might have a chance to architect your own solution using any implementation you’d like or you will have the time to play around with another aspect of the framework. When you do, think back to this post.

Read the article
Customize your icons in Windows 7 and Vista

- by Matthew Guay

Want to change out the icons on your desktop and more? Personalizing your icons is a great way to make your PC uniquely yours,, and today we show you how to grab unique icons, and default Winnows. to be your own. Change the icon for Computer, Recycle Bin, Network, and your User folder Right-click on the desktop, and select Personalize. Now, click the “Change desktop icons” link on the left sidebar in the Personalization window. The window looks slightly different in Windows Vista, but the link is the same. Select the icon you wish to change, and click the Change Icon button. In Windows 7, you will also notice a box to choose whether or not to allow themes to change icons, and you can uncheck it if you don’t want themes to change your icon settings. You can select one of the other included icons, or click browse to find the icon you want. Click Ok when you are finished. Change Folder icons You can easily change the icon on most folders in Windows Vista and 7. Simply right-click on the folder and select properties. Click the Customize tab, and then click the Change Icon button. This will open the standard dialog to change your icon, so proceed as normal. This basically just creates a hidden desktop.ini file in the folder containing the following or similar data: [.ShellClassInfo]IconFile=%SystemRoot%\system32\SHELL32.dllIconIndex=20 You could manually create or edit the file if you choose, instead of using the dialogs. Simply create a new text file named desktop.ini with this same information, or edit the existing one. Change the IconFile line to the location of your icon. If you are pointing to a .ico file you should change the IconIndex line to 0 instead. Note that this isn’t available for all folders, for instance you can’t use this to change the icon for the Windows folder. In Windows 7, please note that you cannot change the icon of folder inside a library. So if you are browsing your Documents library and would like to change an icon in that folder, right-click on it and select Open folder location. Now you can change the icon as above. And if you would like to change a Library’s icon itself, then check out this tutorial: Change Your Windows 7 Library Icons the Easy Way Change the icon of any file type Want to make you files easier to tell apart? Check out our tutorial on how to simply do this: Change a File Type’s Icon in Windows 7 Change the icon of any Application Shortcut To change the icon of a shortcut on your desktop, start menu, or in Explorer, simply right-click on the icon and select Properties. In the Shortcut tab, click the Change Icon button. Now choose one of the other available icons or click browse to find the icon you want. Change Icons of Running Programs in the Windows 7 taskbar If your computer is running Windows 7, you can customize the icon of any program running in the taskbar! This only works on applications that are running but not pinned to the taskbar, so if you want to customize a pinned icon you may want to unpin it before customizing it. But the interesting thing about this trick is that it can customize any icon anything running in the taskbar, including things like Control Panel! Right-click or click and push up to open the jumplist on the icon, and then right-click on the program’s name and select Properties. Here we are customizing Control Panel, but you can do this on any application icon. Now, click Change Icon as usual. Select an icon you want (We switched the Control Panel icon to the Security Shield), or click Browse to find another icon. Click Ok when finished, and then close the application window. The next time you open the program (or Control Panel in our example), you will notice your new icon on its taskbar icon. Please note that this only works on applications that are currently running and are not pinned to the taskbar. Strangely, if the application is pinned to the taskbar, you can still click Properties and change the icon, but the change will not show up. Change the icon on any Drive on your Computer You can easily change the icon on your internal hard drives and portable drives with the free Drive Icon Changer application. Simply download and unzip the file (link below), and then run the application as administrator by right-clicking on the icon and selecting “Run as administrator”. Now, select the drive that you want to change the icon of, and select your desired icon file. Click Save, and Drive Icon Changer will let you know that the icon has been changed successfully. You will then need to reboot your computer to complete the changes. Simply click Yes to reboot. Now, our Drive icon is changed from this default image: to a Laptop icon we chose! You can do this to any drive in your computer, or to removable drives such as USB flash drives. When you change these drives icons, the new icon will appear on any computer you insert the drive into. Also, if you wish to remove the icon change, simply run the Drive Icon Changer again and remove the icon path. Download Drive Icon Changer This application actually simply creates or edits a hidden Autorun.inf file on the top of your drive. You can edit or create the file yourself by hand if you’d like; simply include the following information in the file, and save it in the top directory of your drive: [autorun]ICON=[path of your icon] Remove Arrow from shortcut icons Many people don’t like the arrow on the shortcut icon, and there are two easy ways to do this. If you’re running the 32 bit version of Windows Vista or 7, simply use the Vista Shortcut Overlay Remover. If your computer is running the 64 bit version of Windows Vista or 7, use the Ultimate Windows Tweaker instead. Simply select the Additional Tweaks section, and check the “Remove arrows from Shortcut Icons.” For more info and download links check out this article: Disable Shortcut Icon Arrow Overlay in Windows 7 or Vista Closing: This gives you a lot of ways to customize almost any icon on your computer, so you can make it look just like you want it to. Stay tuned for more great desktop customization articles from How-to Geek! Similar Articles Productive Geek Tips Change Start Menu to Use Small Icons in Windows 7 or VistaResize Icons Quickly in Windows 7 or Vista ExplorerRoundup: 16 Tweaks to Windows Vista Look & FeelRestore Missing Desktop Icons in Windows 7 or VistaClean Up Past Notification Icons in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

Read the article
Silverlight for Windows Embedded tutorial (step 6)

- by Valter Minute

In this tutorial step we will develop a very simple clock application that may be used as a screensaver on our devices and will allow us to discover a new feature of Silverlight for Windows Embedded (transforms) and how to use an “old” feature of Windows CE (timers) inside a Silverlight for Windows Embedded application. Let’s start with some XAML, as usual: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="640" Height="480" FontSize="18" x:Name="Clock"> <Canvas x:Name="LayoutRoot" Background="#FF000000"> <Grid Height="24" Width="150" Canvas.Left="320" Canvas.Top="234" x:Name="SecondsHand" Background="#FFFF0000"> <TextBlock Text="Seconds" TextWrapping="Wrap" Width="50" HorizontalAlignment="Right" VerticalAlignment="Center" x:Name="SecondsText" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="MinutesHand" Width="100" Background="#FF00FF00" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="MinutesText" VerticalAlignment="Center" Width="50" Text="Minutes" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="HoursHand" Width="50" Background="#FF0000FF" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="HoursText" VerticalAlignment="Center" Width="50" Text="Hours" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> </Canvas> </UserControl> This XAML file defines three grid panels, one for each hand of our clock (we are implementing an analog clock using one of the most advanced technologies of the digital world… how cool is that?). Inside each hand we put a TextBlock that will be used to display the current hour, minute, second inside the dial (you can’t do that on plain old analog clocks, but it looks nice). As usual we use XAML2CPP to generate the boring part of our code. We declare a class named “Clock” and derives from the TClock template that XAML2CPP has declared for us. class Clock : public TClock<Clock> { ... }; Our WinMain function is more or less the same we used in all the previous samples. It initializes the XAML runtime, create an instance of our class, initialize it and shows it as a dialog: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1; HRESULT retcode; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; Clock clock; if (FAILED(clock.Init(hInstance,app))) return -1; UINT exitcode; if (FAILED(clock.GetVisualHost()->StartDialog(&exitcode))) return -1; return exitcode; } Silverlight for Windows Embedded provides a lot of features to implement our UI, but it does not provide timers. How we can update our clock if we don’t have a timer feature? We just use plain old Windows timers, as we do in “regular” Windows CE applications! To use a timer in WinCE we should declare an id for it: #define IDT_CLOCKUPDATE 0x12341234 We also need an HWND that will be used to receive WM_TIMER messages. Our Silverlight for Windows Embedded page is “hosted” inside a GWES Window and we can retrieve its handle using the GetContainerHWND function of our VisualHost object. Let’s see how this is implemented inside our Clock class’ Init method: HRESULT Init(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode; if (FAILED(retcode=TClock<Clock>::Init(hInstance,app))) return retcode; // create the timer user to update the clock HWND clockhwnd; if (FAILED(GetVisualHost()->GetContainerHWND(&clockhwnd))) return -1; timer=SetTimer(clockhwnd,IDT_CLOCKUPDATE,1000,NULL); return 0; } We use SetTimer to create a new timer and GWES will send a WM_TIMER to our window every second, giving us a chance to update our clock. That sounds great… but how could we handle the WM_TIMER message if we didn’t implement a window procedure for our window? We have to move a step back and look how a visual host is created. This code is generated by XAML2CPP and is inside xaml2cppbase.h: virtual HRESULT CreateHost(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode; XRWindowCreateParams wp; ZeroMemory(&wp, sizeof(XRWindowCreateParams)); InitWindowParms(&wp); XRXamlSource xamlsrc; SetXAMLSource(hInstance,&xamlsrc); if (FAILED(retcode=app->CreateHostFromXaml(&xamlsrc, &wp, &vhost))) return retcode; if (FAILED(retcode=vhost->GetRootElement(&root))) return retcode; return S_OK; } As you can see the CreateHostFromXaml function of IXRApplication accepts a structure named XRWindowCreateParams that control how the “plain old” GWES Window is created by the runtime. This structure is initialized inside the InitWindowParm method: // Initializes Windows parameters, can be overridden in the user class to change its appearance virtual void InitWindowParms(XRWindowCreateParams* wp) { wp->Style = WS_OVERLAPPED; wp->pTitle = windowtitle; wp->Left = 0; wp->Top = 0; } This method set up the window style, title and position. But the XRWindowCreateParams contains also other fields and, since the function is declared as virtual, we could initialize them inside our version of InitWindowParms: // add hook procedure to the standard windows creation parms virtual void InitWindowParms(XRWindowCreateParams* wp) { TClock<Clock>::InitWindowParms(wp); wp->pHookProc=StaticHostHookProc; wp->pvUserParam=this; } This method calls the base class implementation (useful to not having to re-write some code, did I told you that I’m quite lazy?) and then initializes the pHookProc and pvUserParam members of the XRWindowsCreateParams structure. Those members will allow us to install a “hook” procedure that will be called each time the GWES window “hosting” our Silverlight for Windows Embedded UI receives a message. We can declare a hook procedure inside our Clock class: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { ... } You should notice two things here. First that the function is declared as static. This is required because a non-static function has a “hidden” parameters, that is the “this” pointer of our object. Having an extra parameter is not allowed for the type defined for the pHookProc member of the XRWindowsCreateParams struct and so we should implement our hook procedure as static. But in a static procedure we will not have a this pointer. How could we access the data member of our class? Here’s the second thing to notice. We initialized also the pvUserParam of the XRWindowsCreateParams struct. We set it to our this pointer. This value will be passed as the first parameter of the hook procedure. In this way we can retrieve our this pointer and use it to call a non-static version of our hook procedure: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { return ((Clock*)pv)->HostHookProc(hwnd,Msg,wParam,lParam,pRetVal); } Inside our non-static hook procedure we will have access to our this pointer and we will be able to update our clock: // hook procedure (handles timers) BOOL HostHookProc(HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { switch (Msg) { case WM_TIMER: if (wParam==IDT_CLOCKUPDATE) UpdateClock(); *pRetVal=0; return TRUE; } return FALSE; } The UpdateClock member function will update the text inside our TextBlocks and rotate the hands to reflect current time: // udates Hands positions and labels HRESULT UpdateClock() { SYSTEMTIME time; HRESULT retcode; GetLocalTime(&time); //updates the text fields TCHAR timebuffer[32]; _itow(time.wSecond,timebuffer,10); SecondsText->SetText(timebuffer); _itow(time.wMinute,timebuffer,10); MinutesText->SetText(timebuffer); _itow(time.wHour,timebuffer,10); HoursText->SetText(timebuffer); if (FAILED(retcode=RotateHand(((float)time.wSecond)*6-90,SecondsHand))) return retcode; if (FAILED(retcode=RotateHand(((float)time.wMinute)*6-90,MinutesHand))) return retcode; if (FAILED(retcode=RotateHand(((float)(time.wHour%12))*30-90,HoursHand))) return retcode; return S_OK; } The function retrieves current time, convert hours, minutes and seconds to strings and display those strings inside the three TextBlocks that we put inside our clock hands. Then it rotates the hands to position them at the right angle (angles are in degrees and we have to subtract 90 degrees because 0 degrees means horizontal on Silverlight for Windows Embedded and usually a clock 0 is in the top position of the dial. The code of the RotateHand function uses transforms to rotate our clock hands on the screen: // rotates a Hand HRESULT RotateHand(float angle,IXRFrameworkElement* Hand) { HRESULT retcode; IXRRotateTransformPtr rotatetransform; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode; if (FAILED(retcode=app->CreateObject(IID_IXRRotateTransform,&rotatetransform))) return retcode; if (FAILED(retcode=rotatetransform->SetAngle(angle))) return retcode; if (FAILED(retcode=rotatetransform->SetCenterX(0.0))) return retcode; float height; if (FAILED(retcode==Hand->GetActualHeight(&height))) return retcode; if (FAILED(retcode=rotatetransform->SetCenterY(height/2))) return retcode; if (FAILED(retcode=Hand->SetRenderTransform(rotatetransform))) return retcode; return S_OK; } It creates a IXRotateTransform object, set its rotation angle and origin (the default origin is at the top-left corner of our Grid panel, we move it in the vertical center to keep the hand rotating around a single point in a more “clock like” way. Then we can apply the transform to our UI object using SetRenderTransform. Every UI element (derived from IXRFrameworkElement) can be rotated! And using different subclasses of IXRTransform also moved, scaled, skewed and distorted in many ways. You can also concatenate multiple transforms and apply them at once suing a IXRTransformGroup object. The XAML engine uses vector graphics and object will not look “pixelated” when they are rotated or scaled. As usual you can download the code here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/Clock.zip If you read up to (down to?) this point you seem to be interested in Silverlight for Windows Embedded. If you want me to discuss some specific topic, please feel free to point it out in the comments! Technorati Tags: Silverlight for Windows Embedded,Windows CE

Read the article
Customize the Windows Media Center Start Menu with Media Center Studio

- by DigitalGeekery

Do you ever wish you could change the WMC start menu? Maybe move some of the tiles and strips around to different locations, add new ones, or eliminate some altogether? Today we look at how to do it using Media Center Studio. Download and install Media Center Studio. (Download link below) You’ll also want to make sure you have Windows Media Center closed before running Media Center Studio. Many of the actions cannot be performed with Media Center open. Once installed, you can open Media Center Studio from the Windows Start Menu. When you first open Media Center Studio you’ll be on the Themes tab. Click on the Start Menu tab. It should be noted that Media Center Studio is a Beta application, and it did crash on us a few times, so it’s a good idea to save your work frequently. You can save your changes by selecting Save on the Home tab, or by clicking the small disk icon at the top left. We also found that that trying to launch Media Center from the Start Media Center button on the application ribbon typically didn’t work. Opening Windows Media Center from the Windows Start Menu is preferred. When you’re on the Start Menu tab you will see the Windows Media Center menu strips and tiles. Click the arrows located at the right, left, top, and bottom of the screen to scroll through the various menu strips. Hiding and Removing Tiles and Menu Strips. If there is an entire menu strip that you never use and would like to remove from Media Center, simply uncheck the box to the left of the the title above that menu strip. If you’d like to hide individual tiles, uncheck the box next to the name of the individual tile. Renaming Tiles and Strips To rename a tile or menu strip, click on the small notepad icon next to the title. Note: If you do not see a small notepad icon next to the title, then the title is not editable. This applies to many of the “Promo” tiles. The title will turn into a text input box so that you can edit the name. Click away from the text box when finished. Here we will change the title of the default Movie strip to “Flicks.” Change the Default Tile and Menu Strip The Default menu strip is the strip that is highlighted, or on focus, when you open Media Center. To change the default strip, simply click once on another strip to highlight it, and then save your work. In our example, I’m going to make our newly renamed “Flicks” strip the default. Each menu strip has a default tile. This is the tile that is active, or on focus, when you select the menu strip. To change the default tile on a strip, click once on the tile. You will see it outlined in light blue. Now just simply save your changes. In our example below, we’ve changed the default tile on the TV strip to “guide.” Moving Tiles and Menu Strips You can move an entire Menu Strip up or down on the screen. When you hover your mouse over the a menu strip, you will see up and down arrows appear to the right and left of the title. Click on the arrows to move the strip up or down. You will see the menu strip appear in it’s new position. To move a tile to a new menu strip, click and drag the tile you’d like to move. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. Drag and drop the tile onto to any of these green plus signs to move it to that location. When you’ve dragged the tile over an acceptable position, you’ll see the red “Move” label next to your cursor turn to a blue “Move to” label. Now you can drop the tile into position. You’ll see the tile located in it’s new position. Adding a New Custom Menu Strip Click on the Start Menu tab and then select the Menu Strip button. You will see a new Custom Menu strip appear on your Start Menu with the default name of Custom menu. You can change the name by clicking on the notepad icon just as we did earlier. For our example, we’ll change the name of the new strip to Add-ins. To add a new tile, click on Entry Points at the lower left of the application window. This will reveal all of your available Entry Points that can be added to the Media Center Menu. You should see the built-in Media Center Games and any Media Center Plug-ins you have added to your system. You can then drag and drop any of the Entry Points onto any of the Menu Strips. Below we’ve added Media Browser to our custom Add-ins menu strip. You can also add additional applications to launch directly from Media Center. Click on the Application button on the Start Menu tab. Note: Many applications may not work with your remote, but with keyboard and mouse only. Type in a title which will appear under the tile in Media Center, and then type the path to the application. In our example, we will add Internet Explorer 8. Note: Be sure to add the actual path to the application and not just a link on the desktop. Click any of the check boxes to select any options under Required Capabilities. You can also browse to choose an image if you don’t care for the image that appears automatically. Next, you can select keyboard strokes to press to exit the application and return to Media Center. Click the green plus (+) button. When prompted, press a key you’ll use to close the program. Repeat the process if you’d also like to select a keystroke to kill the program. You’ll see your button programs listed below. When you’re finished, save your work and close out of Media Center Studio. Now your new program entry point will appear in the Entry Points section. Drag the icon to the desired position on the Start Menu and save again before exiting Media Center Studio. When you open Media Center you will see your new application on the start menu. Click the tile to open the application just as you would any other tile. The application will open and minimize Media Center. When you press the key you choose to close the program, Windows Media Center will automatically be restored. Note: You can also exit the application through normal methods by clicking the red “X” or File > Exit. Conclusion Media Center Studio is a Beta application which the developer freely admits still has some bugs. Despite it’s flaws Media Center Studio is a powerful tool, and when it comes to customizing your Media Center start menu, it’s pretty much the only game in town. It works with both Vista and Windows 7, and according to the developer, has not been officially tested with extenders. Media Center Studio can also be used to add custom themes to Windows 7 Media Center and we’ll be covering that in a future article. Looking for more ways to customize your Media Center experience? Be sure to check out our earlier posts on Media Browser, as well as how to add Hulu, Boxee, and weather conditions your Windows 7 Media Center. Download Media Center Studio Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterSchedule Updates for Windows Media CenterStartup Customizations for Media Center in Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

Read the article
SQLAuthority Book Review – DBA Survivor: Become a Rock Star DBA

- by pinaldave

DBA Survivor: Become a Rock Star DBA – Thomas LaRock Link to Amazon Link to Flipkart First of all, I thank all my readers when I wrote that I could not get this book in any local book stores, because they offered me to send a copy of this good book. A very special mention goes to Sripada and Jayesh for they gave so much effort in finding my home address and sending me the hard copy. Before, I did not have the copy of the book, but now I have two of it already! It surprises me how my readers were able to find my home address, which I have not publicly shared. Quick Review: This is indeed a one easy-to-read and fun book. We all work day and night with technology yet we should not forget to show our love and care for our family at home. For our souls that starve for peace and guidance, this one book is the “it” book for all the technology enthusiasts. Though this book was specifically written for DBAs, the reach is not limited to DBAs only because the lessons incorporated in it actually applies to all. This is one of the most motivating technical books I have read. Detailed Review: Let us go over a few questions first: Who wants to be as famous as rockstars in the field of Database Administration? How can one learn what it takes to become a top notch software developer? If you are a beginner in your field, how will you go to next level? Your boss may be very kind or like Dilbert’s Boss, what will you do? How do you keep growing when Eco-system around you does not support you? You are almost at top but there is someone else at the TOP, what do you do and how do you avoid office politics? As a database developer what should be your basic responsibility? and many more… I was able to completely read book in one sitting and I loved it. Before I continue with my opinion, I want to echo the opinion of Kevin Kline who has written the Forward of the book. He has truly suggested that “You hold in your hands a collection of insights and wisdom on the topic of database administration gained through many years of hard-won experience, long nights of study, and direct mentorship under some of the industry’s most talented database professionals and information technology (IT) experts.” Today, IT field is getting bigger and better, while talking about terabytes of the database becomes “more” normal every single day. The gods and demigods of database professionals are taking care of these large scale databases and are carefully maintaining them. In this world, there are only a few beginnings on the first step. There are many experts in different technology fields who are asked to address the issues with databases. There is YOU and ME, who is just new to this work. So we ask ourselves WHERE to begin and HOW to begin. We adore and follow the religion of our rockstars, but oftentimes we really have no idea about their background and their struggles. Every rockstar has his success story which needs to be digested before learning his tricks and tips. This book starts with the same note and teaches the two most important lessons for anybody who wants to be a DBA Rockstar – to focus on their single goal of learning and to excel the technology. The story starts with three simple guidelines – Get Prepared, Get Trained, Get Certified. Once a person learns the skills, and then, it would be about time that he needs to enrich or to improve those skills you have learned. I am sure that the right opportunity will come finding themselves and they will not have to go run behind it. However, the real challenge for any person is the first day or first week. A new employee, no matter how much experienced he is, sometimes has no clue about what should one do at new job. Chapter 2 and chapter 3 precisely talk about what one should do as soon as the new job begins. It is also written with keeping the fact in focus that each job can be very much different but there are few infrastructure setups and programming concepts are the same. Learning basics of database was really interesting. I like to focus on the roots of any technology. It is important to understand the structure of the database before suggesting what indexes needs to be created, the same way this book covers the most essential knowledge one must learn by most database developers. I think the title of the fourth chapter is my favorite sentence in this book. I can see that I will be saying this again and again in the future – “A Development Server Is a Production Server to a Developer“. I have worked in the software industry for almost 8 years now and I have seen so many developers sitting on their chairs and waiting for instructions from their lead about how to improve the code or what to do the next. When I talk to them, I suggest that the experiment with their server and try various techniques. I think they all should understand that for them, a development server is their production server and needs to pay proper attention to the code from the beginning. There should be NO any inappropriate code from the beginning. One has to fully focus and give their best, if they are not sure they should ask but should do something and stay active. Chapter 5 and 6 talks about two essential skills for any developer and database administration – what are the ethics of developers when they are working with production server and how to support software which is running on the production server. I have met many people who know the theory by heart but when put in front of keyboard they do not know where to start. The first thing they do opening the browser and searching online, instead of opening SQL Server Management Studio. This can very well happen to anybody who is experienced as well. Chapter 5 and 6 addresses that situation as well includes the handy scripts which can solve almost all the basic trouble shooting issues. “Where’s the Buffet?” By far, this is the best chapter in this book. If you have ever met me, you would know that I love food. I think after reading this chapter, I felt Thomas has written this just keeping me in mind. I think there will be many other people who feel the same way, too. Even my wife who read this chapter thought this was specifically written for me. I will not talk any more about this chapter as this is one must read chapter. And of course this is about real ‘FOOD‘. I am an SQL Server Trainer and Consultant and I totally agree with the point made in the chapter 8 of this book. Yes, it says here that what is necessary to train employees and people. Millions of dollars worth the labor is continuously done in the world which has faults and incorrect. Once something goes wrong, very expensive consultant comes in and fixes the problem. This whole cycle which can be stopped and improved if proper training is done. There is plenty of free trainings available as well, if one cannot afford paid training. “Connect. Learn. Share” – I think this is a great summary and bird’s eye view of this book. Networking is the key. Everything which is discussed in this book can be taken to next level if one properly uses this tips and continuously grow with it. Connecting with others, helping learn each other and building the good knowledge sharing environment should be the goal of everyone. Before I end the review I want to share a real experience. I have personally met one DBA who has worked in a single department in a company for so long that when he was put in a different department in his company due to closing that department, he could not adjust and quit the job despite the same people and company around him. Adjusting in the new environment gets much tougher as one person gets more and more experienced. This book precisely addresses the same issue along with their solutions. I just cannot stop comparing the book with my personal journey. I found so many things which are coincidently in the book is written as how we developer and DBA think. I must express special thanks to Thomas for taking time in his personal life and write this book for us. This book is indeed a book for everybody who wants to grow healthy in the tough and competitive environment. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, SQLServer, T SQL, Technology

Read the article
Interesting articles and blogs on SPARC T4

- by mv

Interesting articles and blogs on SPARC T4 processor I have consolidated all the interesting information I could get on SPARC T4 processor and its hardware cryptographic capabilities. Hope its useful. 1. Advantages of SPARC T4 processor Most important points in this T4 announcement are : "The SPARC T4 processor was designed from the ground up for high speed security and has a cryptographic stream processing unit (SPU) integrated directly into each processor core. These accelerators support 16 industry standard security ciphers and enable high speed encryption at rates 3 to 5 times that of competing processors. By integrating encryption capabilities directly inside the instruction pipeline, the SPARC T4 processor eliminates the performance and cost barriers typically associated with secure computing and makes it possible to deliver high security levels without impacting the user experience." Data Sheet has more details on these : "New on-chip Encryption Instruction Accelerators with direct non-privileged support for 16 industry-standard cryptographic algorithms plus random number generation in each of the eight cores: AES, Camellia, CRC32c, DES, 3DES, DH, DSA, ECC, Kasumi, MD5, RSA, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512" I ran "isainfo -v" command on Solaris 11 Sparc T4-1 system. It shows the new instructions as expected : $ isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32 2. Dan Anderson's Blog have some interesting points about how these can be used : "New T4 crypto instructions include: aes_kexpand0, aes_kexpand1, aes_kexpand2, aes_eround01, aes_eround23, aes_eround01_l, aes_eround_23_l, aes_dround01, aes_dround23, aes_dround01_l, aes_dround_23_l. Having SPARC T4 hardware crypto instructions is all well and good, but how do we access it ? The software is available with Solaris 11 and is used automatically if you are running Solaris a SPARC T4. It is used internally in the kernel through kernel crypto modules. It is available in user space through the PKCS#11 library." 3. Dans' Blog on Where's the Crypto Libraries? Although this was written in 2009 but still is very useful "Here's a brief tour of the major crypto libraries shown in the digraph: The libpkcs11 library contains the PKCS#11 API (C_\*() functions, such as C_Initialize()). That in turn calls library pkcs11_softtoken or pkcs11_kernel, for userland or kernel crypto providers. The latter is used mostly for hardware-assisted cryptography (such as n2cp for Niagara2 SPARC processors), as that is performed more efficiently in kernel space with the "kCF" module (Kernel Crypto Framework). Additionally, for Solaris 10, strong crypto algorithms were split off in separate libraries, pkcs11_softtoken_extra libcryptoutil contains low-level utility functions to help implement cryptography. libsoftcrypto (OpenSolaris and Solaris Nevada only) implements several symmetric-key crypto algorithms in software, such as AES, RC4, and DES3, and the bignum library (used for RSA). libmd implements MD5, SHA, and SHA2 message digest algorithms" 4. Difference in T3 and T4 Diagram in this blog is good and self explanatory. Jeff's blog also highlights the differences "The T4 servers have improved crypto acceleration, described at https://blogs.oracle.com/DanX/entry/sparc_t4_openssl_engine. It is "just built in" so administrators no longer have to assign crypto accelerator units to domains - it "just happens". Every physical or virtual CPU on a SPARC-T4 has full access to hardware based crypto acceleration at all times. .... For completeness sake, it's worth noting that the T4 adds more crypto algorithms, and accelerates Camelia, CRC32c, and more SHA-x." 5. About performance counters In this blog, performance counters are explained : "Note that unlike T3 and before, T4 crypto doesn't require kernel modules like ncp or n2cp, there is no visibility of crypto hardware with kstats or cryptoadm. T4 does provide hardware counters for crypto operations. You can see these using cpustat: cpustat -c pic0=Instr_FGU_crypto 5 You can check the general crypto support of the hardware and OS with the command "isainfo -v". Since T4 crypto's implementation now allows direct userland access, there are no "crypto units" visible to cryptoadm. " For more details refer Martin's blog as well. 6. How to turn off SPARC T4 or Intel AES-NI crypto acceleration I found this interesting blog from Darren about how to turn off SPARC T4 or Intel AES-NI crypto acceleration. "One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine. The alternate to this is having the application coded to call getisax(2) system call and make the choice itself. We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so and libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run. To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present. This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly. For SPARC T4 : export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" .. For Intel systems with AES-NI support: export LD_HWCAP="-aes"" Note that LD_HWCAP is explained in http://docs.oracle.com/cd/E23823_01/html/816-5165/ld.so.1-1.html "LD_HWCAP, LD_HWCAP_32, and LD_HWCAP_64 - Identifies an alternative hardware capabilities value... A “-” prefix results in the capabilities that follow being removed from the alternative capabilities." 7. Whitepaper on SPARC T4 Servers—Optimized for End-to-End Data Center Computing This Whitepaper on SPARC T4 Servers—Optimized for End-to-End Data Center Computing explains more details. It has DTrace scripts which may come in handy : "To ensure the hardware-assisted cryptographic acceleration is configured to use and working with the security scenarios, it is recommended to use the following Solaris DTrace script. #!/usr/sbin/dtrace -s pid$1:libsoftcrypto:yf*:entry, pid$target:libsoftcrypto:rsa*:entry, pid$1:libmd:yf*:entry { @[probefunc] = count(); } tick-1sec { printa(@ops); trunc(@ops); }" Note that I have slightly modified the D Script to have RSA "libsoftcrypto:rsa*:entry" as well as per recommendations from Chi-Chang Lin. 8. References http://www.oracle.com/us/corporate/features/sparc-t4-announcement-494846.html http://www.oracle.com/us/products/servers-storage/servers/sparc-enterprise/t-series/sparc-t4-1-ds-487858.pdf https://blogs.oracle.com/DanX/entry/sparc_t4_openssl_engine https://blogs.oracle.com/DanX/entry/where_s_the_crypto_libraries https://blogs.oracle.com/darren/entry/howto_turn_off_sparc_t4 http://docs.oracle.com/cd/E23823_01/html/816-5165/ld.so.1-1.html https://blogs.oracle.com/hardware/entry/unleash_the_power_of_cryptography https://blogs.oracle.com/cmt/entry/t4_crypto_cheat_sheet https://blogs.oracle.com/martinm/entry/t4_performance_counters_explained https://blogs.oracle.com/jsavit/entry/no_mau_required_on_a http://www.oracle.com/us/products/servers-storage/servers/sparc-enterprise/t-series/sparc-t4-business-wp-524472.pdf

Read the article
Remote Desktop to Your Azure Virtual Machine

- by Shaun

The Windows Azure Team had just published their new development portal this week and the SDK 1.3. Within this new release there are a lot of cool feature available. The one I’m looking forward to is Remote Desktop Access to your running Windows Azure Virtual Machine. Configuration Remote Desktop Access It would be very simple to make the azure service enable the remote desktop access. First of all let’s create a new windows azure project from the Visual Studio. In this example I just created a normal MVC 2 web role without any modifications. Then we right-click the azure project node in the solution explorer window and select “Publish”. Then let’s select the “Deploy your Windows Azure project to Windows Azure” on the top radio button. And then select the credential, deployment service/slot, storage and label as susal. You must have the Management API Certificates uploaded to your Windows Azure account, and install the certification on you machine before in order to use this one-click deployment feature. If you are familiar with this dialog you will notice that there’s a linkage named “Configure Remote Desktop connections”. Here is where you need to make this service enable the remote desktop feature. After clicked this link we will set the configuration of the remote desktop access authorization information. There are 4 steps we need to do to configure our access. Certificates: We need either create or select a certificate file in order to encypt the access cerdenticals. In this example I will use the certificate file for my Management API. Username: The remote desktop user name to access the virtual machine. Password: The password for the access. Expiration: The access cerdentals would be expired after 1 month by default but we can amend here. After that we clicked the OK button to back to the publish dialog. The next step is to back to the new windows azure portal and navigate to the hosted services list. I created a new hosted service and upload the certificate file onto this service. The user name and password access to the azure machine must be encrypted from the local machine, and then send to the windows azure platform, then decrypted on the azure side by the same file. This is why we need to upload the certificate file onto azure. We navigated to the “Hosted Services, Storage Accounts & CDN"” from the left panel and created a new hosted service named “SDK13” and selected the “Certificates” node. Then we clicked the “Add Certificates” button. Then we select the local certificate file and the password to install it into this azure service. The final step would be back to our Visual Studio and in the pulish dialog just click the OK button. The Visual Studio will upload our package and the configuration into our service with the remote desktop settings. Remote Desktop Access to Azure Virtual Machine All things had been done, let’s have a look back on the Windows Azure Development Portal. If I selected the web role that I had just published we can see on the toolbar there’s a section named “Remote Access”. In this section the Enable checkbox had been checked which means this role has the Remote Desktop Access feature enabled. If we want to modify the access cerdentals we can simply click the Configure button. Then we can update the user name, password, certificates and the expiration date. Let’s select the instance node under the web role. In this case I just created one instance for demo. We can see that when we selected the instance node, the Connect button turned enabled. After clicked this button there will be a RDP file downloaded. This is a Remote Desctop configuration file that we can use to access to our azure virtual machine. Let’s download it to our local machine and execute. We input the user name and password we specified when we published our application to azure and then click OK. There might be some certificates warning dislog appeared. This is because the certificates we use to encryption is not signed by a trusted provider. Just select OK in these cases as we know the certificate is safty to us. Finally, the virtual machine of Windows Azure appeared. A Quick Look into the Azure Virtual Machine Let’s just have a very quick look into our virtual machine. There are 3 disks available for us: C, D and E. Disk C: Store the local resource, diagnosis information, etc. Disk D: System disk which contains the OS, IIS, .NET Frameworks, etc. Disk E: Sotre our application code. The IIS which hosting our webiste on Azure. The IP configuration of the azure virtual machine. Summary In this post I covered one of the new feature of the Azure SDK 1.3 – Remote Desktop Access. We can set the access per service and all of the instances of this service could be accessed through the remote desktop tool. With this feature we can deep into the virtual machines of our instances to see the inner information such as the system event, IIS log, system information, etc. But we should pay attention to modify the system settings. 2 reasons from what I know for now: 1. If we have more than one instances against our service we should ensure that all system settings we modifed are applied to all instances/virtual machines. Otherwise, as the machines are under the azure load balance proxy our application process may doesn’t work due to the defferent settings between the instances. 2. When the virtual machine encounted some problem and need to be translated to another physical machine all settings we made would be disappeared. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article
Windows XP Domain Logon takes between 40 - 60 minutes

- by Bryan

Windows XP Clients, fully patched, with Symantec Endpoint Protection 11 client Windows 2008 R2 domain Roaming profiles Folder Redirection applied to Documents, AppData & Desktop I've enabled userenv logging, and logged on just after 17:00 last night. The user shell hadn't appeared at 17:45 when I left last night. When I arrived this morning, I checked the log file and found the following. USERENV(3f8.e7c) 17:02:18:296 LogExtSessionStatus: Successfully logged Extension Session data USERENV(654.a30) 17:04:09:468 ImpersonateUser: Failed to impersonate user with 5. USERENV(654.a30) 17:04:09:468 GetUserNameAndDomain Failed to impersonate user USERENV(654.a30) 17:04:09:468 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available. USERENV(c8c.cb8) 17:04:09:781 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(cd0.cd4) 17:04:10:781 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(d08.c84) 17:07:09:609 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(cbc.cc0) 17:07:10:625 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\luall.exe USERENV(db0.db4) 17:07:10:781 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(e00.e0c) 17:07:11:062 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(e20.e34) 17:07:11:203 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(e40.e50) 17:07:11:406 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(efc.54c) 17:07:11:656 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(ccc.df0) 17:08:45:687 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(e24.e20) 17:08:45:937 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\luall.exe USERENV(ff0.ff4) 17:08:46:078 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(32c.cd0) 17:08:46:265 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(cc4.3d4) 17:08:46:406 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(434.4d0) 17:08:46:593 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(f2c.ac) 17:08:46:828 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(d60.d7c) 17:09:40:265 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(d94.d98) 17:09:40:531 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(bc4.3c4) 17:10:52:765 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(37c.90c) 17:10:52:984 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\luall.exe USERENV(580.540) 17:10:53:109 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(c18.c30) 17:10:53:312 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(c44.288) 17:10:53:468 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(a34.cf4) 17:10:53:656 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(d3c.d4c) 17:10:53:890 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(970.948) 17:15:09:468 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(150.9dc) 17:15:09:734 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(f90.cec) 17:20:38:718 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(d8c.d70) 17:20:38:984 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(9a0.fa0) 17:26:07:953 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(844.51c) 17:26:08:218 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(d00.9ac) 17:31:19:453 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(ad4.624) 17:31:19:718 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(654.694) 17:31:46:390 ImpersonateUser: Failed to impersonate user with 5. USERENV(654.694) 17:31:46:390 GetUserNameAndDomain Failed to impersonate user USERENV(654.694) 17:31:46:390 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available. USERENV(af8.610) 17:36:48:625 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(aa4.dfc) 17:36:48:906 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(2dc.5c8) 17:42:17:812 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(f70.8ac) 17:42:18:078 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(d50.c30) 17:47:47:062 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(c2c.c3c) 17:47:47:328 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(ef0.4cc) 17:53:16:234 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(cd4.c84) 17:53:16:500 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(828.8c4) 17:58:45:484 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(a24.b30) 17:58:45:750 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE I've seen posts suggesting that it may be Windows Desktop Search 3.01 that is causing this, so I've removed that. I've removed the policy, 'Always wait for the network at startup or logon', thinking that might have helped. I'm running out of ideas. Has anyone seen this before?

Read the article
CodePlex Daily Summary for Tuesday, November 15, 2011

CodePlex Daily Summary for Tuesday, November 15, 2011Popular ReleasesTHE NVL Maker: The NVL Maker Ver 3.10: 3.10 ??? ???： ·????????? ·????????? ·???“TJS”?“??”“EXP”?????“???”,???????? ·???“????”???，???????@if~@elsif~@else~@endif????? ·TJS????????? ·???????????else?endif??? ??： ·???FantasyDR?????????Wizard.exe（?????：http://code.google.com/p/nvlmaker-wizard/） ·KAGConfigEx2.exe??（?????：http://kcddp.keyfc.net/bbs/viewthread.php?tid=1374&extra=page%3D1） ·??????????skin??? ????： ·mapbutton????EXP??（??macro_map.ks） ·??????????AnimPlayer.ks?system????（??????AnimPlayer.ks???macro.ks） ·??????????????，?????...CreateHandouts: Latest Version: Latest VersionSQL Monitor - tracking sql server activities: SQLMon 4.1 alpha2: 1. improved object search, escape special characters, support search histories, and remember search option. 2. allow user to set connection time out. 3. allow user to drag & drop sql text or file to editors.SCCM Client Actions Tool: SCCM Client Actions Tool v0.8: SCCM Client Actions Tool v0.8 is currently the latest version. It comes with following changes since last version: Added "Wake On LAN" action. WOL.EXE is now included. Added new action "Get all active advertisements" to list all machine based advertisements on remote computers. Added new action "Get all active user advertisements" to list all user based advertisements for logged on users on remote computers. Added config.ini setting "enablePingTest" to control whether ping test is ru...Windows Azure SDK for PHP: Windows Azure SDK for PHP v4.0.4: INSTALLATION Windows Azure SDK for PHP requires no special installation steps. Simply download the SDK, extract it to the folder you would like to keep it in, and add the library directory to your PHP include_path. INSTALLATION VIA PEAR Maarten Balliauw provides an unofficial PEAR channel via http://www.pearplex.net. Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPAzure Or if you've already installed PHPAzure before: pear upgrade p...QuickGraph, Graph Data Structures And Algorithms for .Net: 3.6.61116.0: Portable library build that allows to use QuickGraph in any .NET environment: .net 4.0, silverlight 4.0, WP7, Win8 Metro apps.Devpad: 4.7: Whats new for Devpad 4.7: New export to Rich Text New export to FlowDocument Minor Bug Fix's, improvements and speed upsWeapsy: 0.4.1 Alpha: Edit Text bug fixedDesktop Google Reader: 1.4.2: This release remove the like and the broadcast buttons as Google Reader stopped supporting them (no, we don't like this decission...) Additionally and to have at least a small plus: the login window now automaitcally logs you in if you stored username and passwort (no more extra click needed) Finally added WebKit .NET to the about window and removed Awesomium MD5-Hash: 5fccf25a2fb4fecc1dc77ebabc8d3897 SHA-Hash: d44ff788b123bd33596ad1a75f3b9fa74a862fdbFluent Validation for .NET: 3.2: Changes since 3.1: Fixed issue #7084 (NotEmptyValidator does not work with EntityCollection<T>) Fixed issue #7087 (AbstractValidator.Custom ignores RuleSets and always runs) Removed support for WP7 for now as it doesn't support co/contravariance without crashing.RDRemote: Remote Desktop remote configurator V 1.0.0: Remote Desktop remote configurator V 1.0.0Rawr: Rawr 4.2.7: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...VidCoder: 1.2.2: Updated Handbrake core to svn 4344. Fixed the 6-channel discrete mixdown option not appearing for AAC encoders. Added handling for possible exceptions when copying to the clipboard, added retries and message when it fails. Fixed issue with audio bitrate UI not appearing sometimes when switching audio encoders. Added extra checks to protect against reported crashes. Added code to upgrade encoding profiles on old queued items.Media Companion: MC 3.422b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Made the TV Shows folder list sorted. Re-visibled 'Manually Add Path' in Root Folders. Sorted list to process during new tv episode search Rebuild Movies now processes thru folders alphabetically Fix for issue #208 - Display Missing Episodes is not popu...DotSpatial: DotSpatial Release Candidate 1 (1.0.823): Supports loading extensions using System.ComponentModel.Composition. DemoMap compiled as x86 so that GDAL runs on x64 machines. How to: Use an Assembly from the WebBe aware that your browser may add an identifier to downloaded files which results in "blocked" dll files. You can follow the following link to learn how to "Unblock" files. Right click on the zip file before unzipping, choose properties, go to the general tab and click the unblock button. http://msdn.microsoft.com/en-us/library...XPath Visualizer: XPathVisualizer v1.3 Latest: This is v1.3.0.6 of XpathVisualizer. This is an update release for v1.3. These workitems have been fixed since v1.3.0.5: 7429 7432 7427MSBuild Extension Pack: November 2011: Release Blog Post The MSBuild Extension Pack November 2011 release provides a collection of over 415 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Extensions for Reactive Extensions (Rxx): Rxx 1.2: What's NewRelated Work Items Please read the latest release notes for details about what's new. Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many useful types such as ViewModel, CommandSubject, ListSubject, DictionarySubject, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T> and others. Various interactive labs that illustrate the runtime behavior of the extensio...Facebook C# SDK: v5.3.2: This is a RTW release which adds new features and bug fixes to v5.2.1. Query/QueryAsync methods uses graph api instead of legacy rest api. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ (experimental) added support for early preview for .NET 4.5 (binaries not distributed in codeplex nor nuget.org, will need to manually build from Facebook-Net45.sln) added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added ne...Delete Inactive TS Ports: List and delete the Inactive TS Ports: UPDATEAdded support for windows 2003 servers and removed some null reference errors when the registry key was not present List and delete the Inactive TS Ports - The InactiveTSPortList.EXE accepts command line arguments The InactiveTSPortList.Standalone.WithoutPrompt.exe runs as a standalone exe without the need for any command line arguments.New ProjectsAFNC: testArithmetics: arithmetics for silverlight use note pattern by time streamAzon.Library: A collection of extensions, static helpers, AOP attributes. More will added as the project will go on.Chat TextBlock Control: A windows phone 7.1 control Resemble those chat balloon textblocks in the SMS appDiamond Framework: Diamond Framework an Common framework for Diamond Group.DNN Social Helpers: DNN Social HelpersDragon: DragonEasy Video Cropper: A simple application to make cropping videos easy for anyone. - Automatically detects black lines - Uses FFMPEGFluent Resource Mapper: This project aims to develop a framework to assist the internationalization of software using the paradigm Convetion over Configuration.Fully Observable: This project is to create an improved set of observable collections. It provides notifications for when items inside the collection change as well as when the collection itself changes.grpcmnq: no summary at allMathTool: Math tool for silverlight we plan will heve three point .matrix .differential equation .equation of locusnopCommerce Buckaroo payment provider plugin: This is a payment provider plugin for the dutch payment provider BUCKAROO. This plugin is developed and tested for nopCommerce version 2+ Phoenix MVVM+C Framework: Phoenix MVVM+C Framework PowerLib: PowerLib extends system .net library.RDRemote: This utility allows to enable the Remote Desktop connections from a remote computer using WMI.Sencha Touch Mini Workflow Framework: A workflow framework for Sencha Touch mobile apps including automatic component management ShWP: helper library for Windows PhoneTimer, Cronômetro e Despertador: Projeto desenvolvido no curso de extensão de C# da UFSCar SorocabaUtilityLibrary.Ajax: AjaxUtilityLibrary.Email: emailUtilityLibrary.FormBase: UtilityLibrary.FormBaseUtilityLibrary.Http: UtilityLibrary for HttpWebRequestUtilityLibrary.Ormapping: ormappingVoiceModel: VoiceModel is a project which make it easier to develop VoiceXML applications using ASP.Net MVC with Razor. It uses the MVVM (Model-View-VoiceModel) design pattern to abstract the voice application to a higher level. It is developed in C# and Razor.WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.Where's my lei, man?: Where's my lei, man?Zombsquare: Aplicación de ejemplo para Windows Phone utilizada en el Windows Phone Roadshow realizado en España en 2011, en esta solución podras encontra ejemplos de: -Diseño en Blend -BingMaps -GeoLocalizacion -Realidad Aumentada -Converters -Mini-trivial -Serialización de objetos ... resistir un apocalipsis Zombie...

Read the article
CloudBerry Online Backup 1.5 for Windows Home Server

- by The Geek

Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

Read the article
CodePlex Daily Summary for Monday, March 08, 2010

CodePlex Daily Summary for Monday, March 08, 2010New Projects38fj4ncg2: 38fj4ncg2Ac#or: A actor framework written in Mono (C#) Make it easy to make multithreaded programs with the actor model.Aerial Phone Book: It's a ASP app that allow more of one user see a contacts on phone book and add new contacts. This way a group of users can maintain a common phon...AmiBroker Plug-Ins with C#: Plug-ins for AmiBroker built with Microsoft .NET Framework and C#.AxUnit: AxUnit is a Unit Testing framework for Microsoft Dynamics Ax (X++). It's an extension to the SysTest framework provided with DAX4.0 and newer versi...Botola PHP Class: Une class en PHP qui vous permet d'avoir les informations qui concernent les équipes de le championnat Marocain du football.Code examples, utilities and misc from Lars Wilhelmsen [MVP]: Misc. stuff from Lars Wilhelmsen.Codename T: Codename T is in the very basic stages of development. It should be ready for beta testing by the start of April.ComBrowser: combrowserCompact Unity: The Compact Unity is a lightweight dependency injection container with support for constructor and property call injection written in .NET Compact ...FAST for Sharepoint MOSS 2010 Query Tool: Tool to query FAST for Sharepoint and Sharepoint 2010 Enterprise Search. It utilizes the search web services to run your queries so you can test y...Icarus Scene Engine: Icarus Scene Engine is a cross-platform 3D eLearning, games and simulation engine, integrating open source APIs into a cohesive cross-platform solu...jQuery.cssLess: jQuery plugin that interprets and loads LESS css files. (http://lesscss.org).Katara Dental Phase II: Second phase of Kdpl.Lunar Phase Silverlight Gadget: Meet the moon phase, percent of illumination and corresponding zodiac sign from your desktop. Reflection Studio: Reflection Studio is a development tool that encapsulate all my work around reflection, performance and WPF. It allows to inject performance traces...RSNetty: RSNetty is a RuneScape Private Server programmed in the Java programming language.Simple WMV/ASF files muxer/demuxer: Simple WMV files muxer/demuxer implemented in C#/C++. It has simple WPF-based UI and allows copy/replace operations on video, audio and script stre...sm: managerTFS Proxy Monitor: TFS Proxy Monitor. A winform application allow administrator can monitor the TFS Server Proxy statistics remotely.umbracoSamplePackageCreator (beta): This is an early version of a simple package creator for Umbraco as a Visual Studio project. Currently with an Xslt extension and a user control. O...WatchersNET.TagCloud: 3D Flash TagCloud Module for DotNetNukeWriterous: A Plug-in For Windows Live Writer: This plug-in for Live Writer allows the user to create their post in Live Writer and then publish to Posterous.comNew Releases.NET Extensions - Extension Methods Library: Release 2010.05: Added a common set of extension methods for IDataReader, DataRow and DataRowView to access field values in a type safe manner using type dedicated ...AmiBroker Plug-Ins with C#: AmiBroker Plug-Ins v0.0.1: This is just a demo plug-in which shows how you can write plug-ins for AmiBroker with fully managed code.AxUnit: Version 1: AxUnit let's you write Unit Test assertions in Dynamics Ax like this: assert.that(2, is.equalTo2)); Installation instructions (Microsoft Dynamics ...BattLineSvc: V2: - Fixed bug where sometimes the line would not show up, even with the 90 second boot-up delay. This was due to the window being created too early ...Botola PHP Class: Botola API: la classe PHPBugTracker.NET: BugTracker.NET 3.4.0: In screen capture app, "Go to website" now goes to the bug you just created. In screen capture app, fixed where the crosshairs weren't always to...Bulk Project Delete: Version 1.1.1: A minor fix to 1.1: fixes a problem that indicated some projects were not found on the server when they were in fact found. This problem only exist...C# Linear Hash Table: Linear Hash Table b3: Remove functionality added. Now IDictionary Compliant, but most functions not yet tested.Code examples, utilities and misc from Lars Wilhelmsen [MVP]: LarsW.MexEdmxFixer 1.0: A quick hack to fix the Edmx files output by mex.exe (a tool in the SQL Modeling suite - November 2009 CTP) so that they can be opened in the desig...Code Snippet With Syntaxhighlighter Support for Windows Live Writer: Version 5.0.2: Minor update. Added brushes for F#, PowerShell and Erlang. Now a Windows Presentation Framework (WPF) application. ComponentFactory.Krypton.Toolki...Compact Unity: Compact Unity 1.0: Release.Compact Unity: CompactUnity 1.0: Release.FAST for Sharepoint MOSS 2010 Query Tool: Version 0.9: The tool is fully functioning. All of the cases for exceptions may not have been caught yet. I wanted to release a version to allow people to use...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite RC (for .NET 4.0 RC): Build for .NET 4.0 RC. Includes Fluent.dll (with .pdb and .xml) and test application compiled with .NET 4.0 RC. BEAWARE! Fluent for .NET 4.0 RC is...FluentNHibernate.Search: 0.2 Beta: 0.2 Beta Fixed : #7275 - Field Mapping without specifying "Name" Fixed : #7271 - StackOverFlow Exception while Configure Embedded Mappings Fixed :...InfoService: InfoService v1.5 Beta 9: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't guarantee that! So use it on your own risk. Please read Plug...jQuery.cssLess: jQuery.cssLess 0.2: Version supports variables, mixins and nested rules. TODO: lower scope variables and mixins should not delete higher scope variables and mixins ...Lunar Phase Silverlight Gadget: Lunar Phase: First public beta for Lunar Phase Silverlight Gadget. It's a stable release but it hasn't auto update state. That will come with the final release ...MapWindow GIS: MapWindow 6.0 msi (March 7): This is an update that fixes a number of problems with the multi-point features, the M and Z features as well as enabling multi-part creation using...Mews: Mews.Application V0.7: Installation InstuctionsNew Features15390 15085 Fixed Issues16173 16552. This happens when the database maintenance process kicks in during sta...sELedit: sELedit v1.0a: Added: Basic exception handlers (load/save/export) Added: List 57 support (no search and replace) Added: MYEN 1.3.1 Client ->CN 1.3.6 Server export...Sem.Sync: 2010-03-07 - End user client for Xing to Outlook: This client does include the binaries for syncing Xing contacts to Microsoft Outlook. It does contain only the binaries to sync from Xing to Outloo...Sem.Sync: 2010-03-07 - Synchronization Manager: This client does provide a more advanced (and more complex) GUI that allows you to select from two included templates (you can add your own, too) a...SharePoint Outlook Connector: Source Code for Version 1.2.3.2: Source Code for Version 1.2.3.2SharePoint Video Player Web Part & SharePoint Video Library: Version 2.0.0: Release Notes: New The new SharePoint Video Player release includes a SharePoint video template to create your own video library Changes The Shar...SilverSprite: SilverSprite 3.0 Alpha 2: These are the latest binaries for SilverSprite. The major changes for this release are that we are now using the XNA namespaces (no more #Iif SILVE...Simple WMV/ASF files muxer/demuxer: Initial release: Initial releaseStarter Master Pages for SharePoint 2010: Starter Master Pages for SP2010 - RC: Release Candidate release of Starter Master Pages for SharePoint 2010 by Randy Drisgill http://blog.drisgill.com _starter.master - Starter Master ...Text Designer Outline Text Library: 11th minor release: New Feature : Reflection!!ToolSuite.ValidationExpression: 01.00.01.002: second release of the validation class; the assembly file is ready to use, the documentation is complete;Truecrafting: Truecrafting 0.51: overhauled truecrafting code: combined all engines into 1 mage engine, made the engine and artificial intelligence support any spec, and achieved a...WatchersNET.TagCloud: WatchersNET.TagCloud 01.00.00: First ReleaseWCF Contrib: WCF Contrib v2.1 Mar07: This release is the final version of v2.1 Beta that was published on February 10th. Below you will find the changes that were made: Changes from v...WillStrohl.LightboxGallery Module for DotNetNuke: WillStrohl.LightboxGallery v1.02.00: This version of the Lightbox Gallery Module adds the following features: New Lightbox provider: Fancybox Thumbnails generated keeping their aspec...Writerous: A Plug-in For Windows Live Writer: Writerous v1.0: This is the first release of Writerous.WSDLGenerator: WSDLGenerator 0.0.0.5: - Use updated CommandLineParser.dll - Code uses 'ServiceDescriptionReflector' instead of custom code. - Added option to support SharePoint 2007 com...Xpress - ASP.NET MVC 个人博客程序: xpress2.1.0.beta.bin: 原 DsJian1.0的升级版本，名字修改为 xpress 此正式版本YSCommander: Version 1.0.1.0: Fixed bug: 1st start with non-existing data file.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesImage Resizer Powertoy Clone for WindowsMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFluent AssertionsFasterflect - A Fast and Simple Reflection API

Read the article
CodePlex Daily Summary for Friday, April 30, 2010

CodePlex Daily Summary for Friday, April 30, 2010New ProjectsAcres2: This is the new hotnessAsoraX.de - AirlineTycoon: EntwicklungsPhase von AsoraX.deazshop: Ecommerce macros and user controls based on Commerce4Umbraco from Umbraco CMS Project.BioPhotoAnalyzer: Some exercises with F#, WPF and Mathematical methods for quantitative analysis of biological photos, such as those obtained from microscopy, PAGE etcCECS622 - Simulations - South Computing Center: This simulation will be used to study the traffic flow of the South Computing Center (SCC) on the UofL campus. Document.Viewer: Basic document viewer for Windows XP, Vista and Windows 7 that supports FlowDocument, Rich and Plan Text FormatsDotNetNuke 5 Thai Language Pack: DotNetNuke Thai Language PackDotNetNuke Skins Pack: We derive html/css template from www.freecsstemplates.org and apply to DotNetNuke 4 & 5 Skins Pack.Dynamics AX Business Intelligence: Sample code for creating and using Dynamics AX Business Intelligence Easy Chat: Very simple kind of chat; it got DOS interface. It's just to start the server start the client enter the IP, enter your name, and you're ready to go!Html Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that wa...HydroServer - CUAHSI Hydrologic Information System Server: HydroServer is a set of software applications for publishing hydrologic datasets on the Internet. HydroServer leverages commercial software such a...Lisp.NET: Lisp.NET is a project that demonstrates how the Embedded Common Lisp (ECL) environment can be loaded and used from .NET. This enables Common Lisp ...Live-Exchange Calendar Sync: Live - Exchange Calendar Sync synchronizes calendars of users between 2 Exchange servers (it can be Live Calendar also). It's developed in C#. It u...MaLoRT : Mac Lovin' RayTracer: RaytracerMojo Workflow Web UI: Mojo Workflow Web UIMoonRover - Enter Island: Simple Graphics consumer application that simulates Moon RoversMVC Music Store: MVC Music Store is a tutorial application built on ASP.NET MVC 2. It's a lightweight sample store which sells albums online, demonstrating ASP.NET ...OpenPOS: OpenPOS, a completely open and free point-of-sale systemPgcDemuxCLI: A modified version of PgcDemux (http://download.videohelp.com/jsoto/dvdtools.htm) that has better CLI support and progress reporting.Sample 01: basic summarySharedEx: App dev in VS2010 RTM and Silverlight 4.0 for Windows Phone 7!SharePoint 2010 Managed Metadata WebPart: This SharePoint 2010 webpart creates a navigation control from a Managed Metadata column assigned to a list/library. The Termset the column relates...SharePoint 2010 Service Manager: The SharePoint Service manager let's you start and stop all the SharePoint 2010 services on your workstation. This is useful if you are running S...Sharp DOM: Sharp DOM is a view engine for ASP.NET MVC platform allowing developers to design extendable and maintenable dynamic HTML layouts using C# 4.0 lang...simple fx: simple framework written in javascriptSimpleGFC.NET: Simple GFC is a .NET library written in C# for simplifying the connection to Google Friend Connect. It is designed to be simple and concise, not a...SPSS & PSPP file library: Library for importing SPSS (now called PASW) & PSPP .sav datafiles, developed in C#. Support for writing and SPSS portable-files will be implemente...TailspinSpyworks - WebForms Sample Application: Tailspin Spyworks demonstrates how extraordinarily simple it is to create powerful, scalable applications for the .NET platform. It shows off how t...VividBed: Business website.卢融凯的个人主页: 卢融凯的个人主页New ReleasesAssemblyVerifier: 4.0.0.0 Release: Updated to target .NET 4.0Bricks' Bane: Bricks' Bane Editor v1.0.0.4: I've added functionality to the editor, after some personal use. Plus I fixed a bug that was occurring on file loading mostly when the file was mod...Dambach Linear Algebra Framework: Linear Algebra Framework - Sneak Peak: This is just to get the code out there into the hands of potential users and to elicit feedback.DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 4a: DevTreks calculators, analyzers, and story tellers are being upgraded so that they can be extended by third parties using either add-ins (Managed ...DirectQ: Release 1.8.3c: Fixes some more late-breaking bugs and adds some optimizations from the forthcoming 1.8.4 release. No Windows 98 build this time. I may add one a...Document Assembly from a SharePoint Library using the Open XML SDK: Solution for March 2010 rel of the Open XML SDK: Microsoft changed some class names between the December 2009 CTP and the March 2010 release of the Open XML SDK which means that old solution will ...Document.Viewer: 0.9.0: Whats New?: New icon set Bug fix'sDotNetNuke Skins Pack: DNN 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DotNetWinService: Release 1.0.0.0: This release includes four different scheduled tasks: 1) TaskURL: Petition a specific URL: when working on a ASP.NET website, it's sometimes ...Hammock for REST: Hammock v1.0.1: v1.0.1 ChangesFixes to improve OAuth stability Fixes for asynchronous timeouts Fixes and simplification for retries v1.0 FeaturesSimple, clean...Home Access Plus+: v4.1.1: v4.1.1 Change Log: Added Enable for Booking Resource to allow Resources to be disabled but not deleted Updated HAP.Config for above File Changes...HouseFly controls: HouseFly controls alpha 0.9.6.0: HouseFly controls release 0.9.6.0 alphaHydroServer - CUAHSI Hydrologic Information System Server: ODM Data Loader 1.1.3: Version 1.1.3 of the ODM Data Loader is only compatible with version 1.1 of ODM This Version Addresses : Memory issues in Version 1.1.2 that were ...Jobping Url Shortener: Source Code v0.1: Source code for the 0.1 release.LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.6: Fixed the crash after accepting the use of internet access.mojoPortal: 2.3.4.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2343-released.aspxMoonRover - Enter Island: Moon Rover: Simulates Rover Moves on MoonNanoPrompt: Release 0.4.1 - Beta 1.1: Now released: Beta 1.1 for .NET 4.0ORAYLIS BI.SmartDiff: Release 1.0.0: see change log for detailsQuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.22: Main FeaturesClean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between s...SharePoint 2010 Managed Metadata WebPart: Taxonomy WebPart 0.0.1: Initial version releasedSharePoint 2010 Service Manager: SharePoint Service Manager 2010 v1: Starts and stops all SharePoint services Works with both Microsoft SQL Server and SQL Server Express Edition (for SharePoint) Supports disablin...Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet RTM Release: Shweet has been updated to work with the RTM of SharePoint and the latest version of Pex Visual Studio 2010 Power Tools. Know issues: Continuous I...Silverlight Testing Automation Tool: StatLight v1.0 - Beta 1: Things still to accomplish (before official v1 release)Item # 10716: Release build hangs on x64 machine Still awaiting UnitDriven change feedback...SPSS & PSPP file library: 0.1 alpha: This first test release allows to read an .sav SPSS/PSPP/PASW file and retreive the data, either in the form of a .net DataReader or as a custom Sp...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.0.0: Initial Public Release Requirements: .NET Framework 2.0 SqlDiffFramework is designed for the enterprise! Check with your system administrator (or...sqwarea: Sqwarea 0.0.210.0 (alpha): First public release. Deploy package contains : the documentation for classes. the azure package with the Web Role. the zip with assemblies wh...Sweeper: Sweeper Alpha 2: SweeperA Visual Studio Add-in for C# Code Formatting - Visual Studio 2008 Includes: A UI for options, Enable or disable any specific task you want ...TailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.8: ASP.NET 4 ECommerce ApplicationTweetSharp: TweetSharp Release Candidate: New FeaturesComplete core rewrite for stability and speed, introducing Hammock http://hammock.codeplex.com Windows Phone 7, Silverlight 4 OOB (El...Wicked Compression ASP.NET HTTP Module: Wicked Compression ASP.NET HTTP Module Beta: Now supports AJAX from .NET Framework 2.0 through 4.0! Bug Fix for Excluded Paths! Binary Release Included for .NET Framework 2.0 through 4.0!Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterHydroServer - CUAHSI Hydrologic Information System ServerGMap.NET - Great Maps for Windows Forms & PresentationParticle Plot Pivotpatterns & practices: Azure Security GuidanceSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleN2 CMS

Read the article
Building services with the .NET framework Cont’d

- by Allan Rwakatungu

In my previous blog I wrote an introductory post on services and how you can build services using the .NET frameworks Windows Communication Foundation (WCF) In this post I will show how to develop a real world application using WCF The problem During the last meeting we realized developers in Uganda are not so cool – they don’t use twitter so may not get the latest news and updates from the technology world. We also noticed they mostly use kabiriti phones (jokes). With their kabiriti phones they are unable to access the twitter web client or alternative twitter mobile clients like tweetdeck , twirl or tweetie. However, the kabiriti phones support SMS (Yeeeeeeei). So what we going to do to make these developers cool and keep them updated is by enabling them to receive tweets via SMS. We shall also enable them to develop their own applications that can extend this functionality Analysis Thanks to services and open API’s solving our problem is going to be easy. 1. To get tweets we can use the twitter service for FREE 2. To send SMS we shall use www.clickatell.com/ as they can send SMS to any country in the world. Besides we could not find any local service that offers API's for sending SMS :(. 3. To enable developers to integrate with our application so that they can extend it and build even cooler applications we use WCF. In addittion , because connectivity might be an issue we decided to use WCF because if has a inbuilt queing features. We also choose WCF because this is a post about .NET and WCF :). The Code Accessing the tweets To consume twitters REST API we shall use the WCF REST starter kit. Like it name indicates , the REST starter kit is a set of .NET framework classes that enable developers to create and access REST style services ( like the twitter service). Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Http; using System.Net; using System.Xml.Linq; namespace UG.Demo { public class TwitterService { public IList<TwitterStatus> SomeMethodName() { //Connect to the twitter service (HttpClient is part of the REST startkit classes) HttpClient cl = new HttpClient("http://api.twitter.com/1/statuses/friends_timeline.xml"); //Supply your basic authentication credentials cl.TransportSettings.Credentials = new NetworkCredential("ourusername", "ourpassword"); //issue an http HttpResponseMessage resp = cl.Get(); //ensure we got reponse 200 resp.EnsureStatusIsSuccessful(); //use XLinq to parse the REST XML var statuses = from r in resp.Content.ReadAsXElement().Descendants("status") select new TwitterStatus { User = r.Element("user").Element("screen_name").Value, Status = r.Element("text").Value }; return statuses.ToList(); } } public class TwitterStatus { public string User { get; set; } public string Status { get; set; } } } Sending SMS Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} public class SMSService { public void Send(string phone, string message) { HttpClient cl1 = new HttpClient(); //the clickatell XML format for sending SMS string xml = String.Format("<clickAPI><sendMsg><api_id>3239621</api_id><user>ourusername</user><password>ourpassword</password><to>{0}</to><text>{1}</text></sendMsg></clickAPI>",phone,message); //Post form data HttpUrlEncodedForm form = new HttpUrlEncodedForm(); form.Add("data", xml); System.Net.ServicePointManager.Expect100Continue = false; string uri = @"http://api.clickatell.com/xml/xml"; HttpResponseMessage resp = cl1.Post(uri, form.CreateHttpContent()); resp.EnsureStatusIsSuccessful(); } }

Read the article
CodePlex Daily Summary for Wednesday, January 12, 2011

CodePlex Daily Summary for Wednesday, January 12, 2011Popular ReleasesGoogle URL Shortener API for .NET: Google URL Shortener API v1: According follow specification: http://code.google.com/apis/urlshortener/v1/reference.htmljGestures: a jQuery plugin for gesture events: 0.81: added event substitution for IE updated index.htmlStyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...SQL Monitor - tracking sql server activities: SQL Monitor 3.1 beta 1: 1. support alert message template 2. dynamic toolbar commands depending on functionality 3. fixed some bugs 4. refactored part of the code, now more stable and more clean upFacebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcUmbraco CMS: Umbraco 4.6: The Umbraco 4.6 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login timeout ...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OpenStreetMap 1.1 beta2: This is the beta2 release for the ArcGIS Editor for OpenStreetMap version 1.1. Changes from version 1.0: Multi-part geometries are now supported. Homogeneous relations (consisting of only lines or only polygons) are converted into the appropriate multi-part geometry. Mixed relations and super relations are maintained and tracked in a stand-alone relation table. The underlying editing logic has changed. As opposed to tracking the editing changes upon "Save edit" or "Stop edit" the changes a...Hawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.5: In the case you are running an x86 Windows and you installed Release 1.2.4, you should consider upgrading to this release (1.2.5) as it appears Hawkeye is broken on x86 OS. I apologize for the inconvenience, but it appears Hawkeye 1.2.4 (and probably previous versions) doesn't run on x86 Windows (See issue http://hawkeye.codeplex.com/workitem/7791). This maintenance release fixes this broken behavior. This release comes in two flavors: Hawkeye.125.N2 is the standard .NET 2 build, was compile...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (January 2011): Another release build for daily use; it contains many new features, enhanced compatibility with latest PHP opensource applications and several issue fixes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger. Changes made within this release include following: New features available only in Phalanger. Full support of Multi-Script-Assemblies was implemented; you can build your application into several DLLs now. Deploy them separately t...EnhSim: EnhSim 2.3.0: 2.3.0This release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Changed how flame shoc...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlTweetSharp: TweetSharp v2.0.0.0 - Preview 7: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 7 ChangesFixes the regression issue in OAuth from Preview 6 Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Third Party Library VersionsHammock v1.0.6: http://hammock.codeplex.com Json.NET 3.5 Release 8: http://json.codeplex.comExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.UltimateJB: Ultimate JB 2.03 PL3 KAKAROTO + HERMES + Spoof 3.5: Voici une version attendu avec impatience pour beaucoup : - La version PL3 KAKAROTO intégre ses dernières modification et intégre maintenant le firmware 2.43 !!! Conclusion : - UltimateJB203PSXXXDEFAULTKAKAROTO=> Pas de spoof mais disponible pour les PS3 suivantes : 3.41_kiosk 3.41 3.40 3.30 3.21 3.15 3.10 3.01 2.76 2.70 2.60 2.53 2.43 - UltimateJB203PS341_HERMES => Pas de spoof mais version hermes 4b - UltimateJB203PS341HERMESSPOOF35X => hermes 4b + spoof des firmwares 3.50 et 3.55 au li....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch...New ProjectsASP.NET MVC Scaffolding: Scaffolding package for ASP.NETAstor: OData Explorer: OData ExplorerBasic Users Community: A simple user community with threads and posts.Bukkit Server Manager: BSM makes server managing easy we have multiple type and database support including: MySql, SQLite types: VPS, Dedicated, Home PCCh4CP: Chamber 4 control programDotNetNuke Telerik Library: A set of Telerik wrappers for DotNetNuke module developers to utilize which aren't yet included as of 5.6.1. Eventually this will be offloaded to the core. Enjoy Life: our fypFolderSizeChecker: It suppose to check the size of big folders in specific partition and help user to find the most disk usage location. (It's simple project so please don't expect big and complex algorithms)HomeTeamOnline: This is project of HomeTeamOnlineICSWorld: This is project of ICSWorldIMAP Client for .NET 4.0 using LumiSoft: Develop an IMAP client using this sample project based on the LumiSoft .NET open source project. This project compiles in .NET 4.0 and demonstrates how to pull email using IMAP. The purpose of the project is for email auto processing.MUIExt (Multilingual User Interface Extender): MUIExt makes it easier for SharePoint 2010 users to create multilingual sites. You'll no longer have to live with the MUI limitations or have to manage variations. It's developed in csharp.Phoenix Service Bus: The goal of this pServiceBus is to provide an API and Service Components that would make implementing an ESB Infrastructure in your environment. It's developed in C#, and also have API written for Javascript Clients PhotoSnapper: Home project just to rename photos or .mov files in a folder starting from from a user defined number.redditfier: A windows application to notify redditors with new posts.SharePoint Field Updater: Automatically update sub fields according to a lookup field. For example: Updating field "Contact" will automatically put "Contact Email" and "Address" in the appropriate text fields.TXLCMS: emptyUmbraco Spark engine: Spark macro engine for UmbracoUrdu Translation: Urdu Translation Project WFTestDesign: BizUnit WF is based on BizUnit solution that allows user to define a test using WorkFlow UI, custom activities designed in this extension and general Workflow activities.It's enable also to use breakpoint in test. It's developed in C#.WPF Date Range Slider: A WPF Date Range Slider user control written with C# to allow your users to choose a range of dates using a double thumbed slider control.WPMind Framework for WP7: This project is used to provide some Windows Phone 7 controls for Windows Phone 7 Silverlight developer. Please join us if you are interested in this project.

Read the article
What does it mean when a User-Agent has another User-Agent inside it?

- by Erx_VB.NExT.Coder

Basically, sometimes the user-agent will have its normal user-agent displayed, then at the end it will have teh "User-Agent: " tag displayed, and right after it another user-agent is shown. Sometimes, the second user-agent is just appended to the first one without the "User-Agent: " tag. Here are some samples I've seen: The first few contain the "User-Agent: " tag in the middle somewhere, and I've changed its font to make it easier to to see. Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; GTB6; User-agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1); SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506) Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; MRA 5.10 (build 5339); User-agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1); .NET CLR 1.1.4322; .NET CLR 2.0.50727) Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; User-agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1); .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; User-agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1); .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152) Here are some without the "User-Agent: " tag in the middle, but just two user agents that seem stiched together. Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1); .NET CLR 3.5.30729) Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; IPMS/6568080A-04A5AD839A9; TCO_20090713170733; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1); InfoPath.2) Now, just to add a few notes to this. I understand that the "User-Agent: " tag is normally a header, and what follows a typical "User-Agent: " string sequence is the actual user agent that is sent to servers etc, but normally the "User-Agent: " string should not be part of the actual user agent, that is more like the pre-fix or a tag indicating that what follows will be the actual user agent. Additionally, I may have thought, hey, these are just two user agents pasted together, but on closer inspection, you realize that they are not. On all of these dual user agent listings, if you look at the opening bracket "(" just before the "compatible" keyword, you realize the pair to that bracket ")" is actually at the very end, the end of the second user agent. So, the first user agents closing bracket ")" never occurs before the second user agent begins, it's always right at the end, and therefore, the second user agent is more like one of the features of the first user agent, like: "Trident/4.0" or "GTB6" etc etc... The other thing to note that the second user agent is always MSIE 6.0 (Internet Explorer 6.0), interesting. What I had initially thought was it's some sort of Virtual Machine displaying the browser in use & the browser that is installed, but then I thought, what'd be the point in that? Finally, right now, I am thinking, it's probably soem sort of "Compatibility View" type thing, where even if MSIE 7.0 or 8.0 is installed, when my hypothetical the "Display In Internet Explorer 6.0" mode is turned on, the user agent changes to something like this. That being, IE 8.0 is installed, but is rendering everything as IE 6.0 would. Is there or was there such a feature in Internet Explorer? Am I on to something here? What are your thoughts on this? If you have any other ideas, please feel free to let us know. At the moment, I'm just trying to understand if these are valid User Agents, or if they are invalid. In a list of about 44,000 User Agents, I've seen this type of Dual User Agent about 400 times. I've closely inspected 40 of them, and every single one had MSIE 6.0 as the "second" user agent (and the first user agent a higher version of MSIE, such as 7 or 8). This was true for all except one, where both user agents were MSIE 8.0, here it is: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 8.0; Win32; GMX); GTB0.0) This occured once in my 40 "close" inspections. I've estimated the 400 in 44,000 by taking a sample of the first 4,400 user agents, and finding 40 of these in the MSIE/Windows user agents, and extrapolated that to estimate 40. There were also similar things occuring for non MSIE user agents where there were two Mozilla's in one user agent, the non MSIE ones would probably add another 30% on top of the ones I've noted. I can show you samples of them if anyone would like. There we have it, this is where I'm at, what do you guys think?

Read the article
Linux Kernel not upgraded (from Ubuntu 12.04 to 12.10) - can't remove old kernels and can't install new apps

- by Tony Breyal

Question: How do I remove old kernel images which refuse to be removed? Context: Yesterday I upgraded Ubuntu from 12.04 to 12.10. However, the linux kernel has not upgraded from 3.2 to 3.5 as I would have expected. $ uname -r 3.2.0-32-generic $ uname -a Linux tony-b 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /proc/version Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 Not sure why that happened there. I wanted to install Audacity (v2.0.1-1_amd64) to edit a lecture audio file. When trying this operation through Ubuntu Software Center, it says that to install audacity, four items will need to be removed: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic So I click "Install Anyway" but it fails with the following output: installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 259675 files and directories currently installed.) Removing linux-image-3.2.0-27-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-27-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-27-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-27-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-29-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-29-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-29-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-29-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-30-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-30-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-30-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-31-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-31-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-31-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-31-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic Error in function: Setting up grub-pc (2.00-7ubuntu11) ... /usr/sbin/grub-bios-setup: warning: Sector 32 is already in use by the program `FlexNet'; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Generating grub.cfg ... dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 1 It seems I need to remove the old linux images somehow. I have tried this through (1) Synaptic, (2) Ubuntu Tweak, and (3) Computer Janitor. The first two fail, whilst Computer Janitor won't even open. The output from Synaptic is: E: linux-image-3.2.0-27-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-29-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-30-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-31-generic: subprocess installed post-removal script returned error exit status 1 How do I remove these old images? Thank you kindly in advance for any help on this matter. P.S. Further information: $ dpkg --list | grep linux-image rH linux-image-3.2.0-27-generic 3.2.0-27.43 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-29-generic 3.2.0-29.46 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-30-generic 3.2.0-30.48 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-31-generic 3.2.0-31.50 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-32-generic 3.2.0-32.51 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.5.0-17-generic 3.5.0-17.28 amd64 Linux kernel image for version 3.5.0 on 64 bit x86 SMP ii linux-image-extra-3.5.0-17-generic 3.5.0-17.28 amd64 Linux kernel image for version 3.5.0 on 64 bit x86 SMP ii linux-image-generic 3.5.0.17.19 amd64 Generic Linux kernel image But trying to remove using the command line fails too e.g.: $ sudo apt-get purge linux-image-3.2.0-27-generic Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic 0 upgraded, 0 newly installed, 4 to remove and 1 not upgraded. 5 not fully installed or removed. After this operation, 597 MB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 259675 files and directories currently installed.) Removing linux-image-3.2.0-27-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-27-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-27-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-27-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-29-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-29-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-29-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-29-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-30-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-30-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-30-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-31-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-31-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-31-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-31-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Errors were encountered while processing: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

Read the article
The Incremental Architect´s Napkin - #1 - It´s about the money, stupid

- by Ralf Westphal

Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/05/24/the-incremental-architectacutes-napkin---1---itacutes-about-the.aspx Software development is an economic endeavor. A customer is only willing to pay for value. What makes a software valuable is required to become a trait of the software. We as software developers thus need to understand and then find a way to implement requirements. Whether or in how far a customer really can know beforehand what´s going to be valuable for him/her in the end is a topic of constant debate. Some aspects of the requirements might be less foggy than others. Sometimes the customer does not know what he/she wants. Sometimes he/she´s certain to want something - but then is not happy when that´s delivered. Nevertheless requirements exist. And developers will only be paid if they deliver value. So we better focus on doing that. Although is might sound trivial I think it´s important to state the corollary: We need to be able to trace anything we do as developers back to some requirement. You decide to use Go as the implementation language? Well, what´s the customer´s requirement this decision is linked to? You decide to use WPF as the GUI technology? What´s the customer´s requirement? You decide in favor of a layered architecture? What´s the customer´s requirement? You decide to put code in three classes instead of just one? What´s the customer´s requirement behind that? You decide to use MongoDB over MySql? What´s the customer´s requirement behind that? etc. I´m not saying any of these decisions are wrong. I´m just saying whatever you decide be clear about the requirement that´s driving your decision. You have to be able to answer the question: Why do you think will X deliver more value to the customer than the alternatives? Customers are not interested in romantic ideals of hard working, good willing, quality focused craftsmen. They don´t care how and why you work - as long as what you deliver fulfills their needs. They want to trust you to recognize this as your top priority - and then deliver. That´s all. Fundamental aspects of requirements If you´re like me you´re probably not used to such scrutinization. You want to be trusted as a professional developer - and decide quite a few things following your gut feeling. Or by relying on “established practices”. That´s ok in general and most of the time - but still… I think we should be more conscious about our decisions. Which would make us more responsible, even more professional. But without further guidance it´s hard to reason about many of the myriad decisions we´ve to make over the course of a software project. What I found helpful in this situation is structuring requirements into fundamental aspects. Instead of one large heap of requirements then there are smaller blobs. With them it´s easier to check if a decisions falls in their scope. Sure, every project has it´s very own requirements. But all of them belong to just three different major categories, I think. Any requirement either pertains to functionality, non-functional aspects or sustainability. For short I call those aspects: Functionality, because such requirements describe which transformations a software should offer. For example: A calculator software should be able to add and multiply real numbers. An auction website should enable you to set up an auction anytime or to find auctions to bid for. Quality, because such requirements describe how functionality is supposed to work, e.g. fast or secure. For example: A calculator should be able to calculate the sinus of a value much faster than you could in your head. An auction website should accept bids from millions of users. Security of Investment, because functionality and quality need not just be delivered in any way. It´s important to the customer to get them quickly - and not only today but over the course of several years. This aspect introduces time into the “requrements equation”. Security of Investments (SoI) sure is a non-functional requirement. But I think it´s important to not subsume it under the Quality (Q) aspect. That´s because SoI has quite special properties. For one, SoI for software means something completely different from what it means for hardware. If you buy hardware (a car, a hair blower) you find that a worthwhile investment, if the hardware does not change it´s functionality or quality over time. A car still running smoothly with hardly any rust spots after 10 years of daily usage would be a very secure investment. So for hardware (or material products, if you like) “unchangeability” (in the face of usage) is desirable. With software you want the contrary. Software that cannot be changed is a waste. SoI for software means “changeability”. You want to be sure that the software you buy/order today can be changed, adapted, improved over an unforseeable number of years so as fit changes in its usage environment. But that´s not the only reason why the SoI aspect is special. On top of changeability[1] (or evolvability) comes immeasurability. Evolvability cannot readily be measured by counting something. Whether the changeability is as high as the customer wants it, cannot be determined by looking at metrics like Lines of Code or Cyclomatic Complexity or Afferent Coupling. They may give a hint… but they are far, far from precise. That´s because of the nature of changeability. It´s different from performance or scalability. Also it´s because a customer cannot tell upfront, “how much” evolvability he/she wants. Whether requirements regarding Functionality (F) and Q have been met, a customer can tell you very quickly and very precisely. A calculation is missing, the calculation takes too long, the calculation time degrades with increased load, the calculation is accessible to the wrong users etc. That´s all very or at least comparatively easy to determine. But changeability… That´s a whole different thing. Nevertheless over time the customer will develop a feedling if changeability is good enough or degrading. He/she just has to check the development of the frequency of “WTF”s from developers ;-) F and Q are “timeless” requirement categories. Customers want us to deliver on them now. Just focusing on the now, though, is rarely beneficial in the long run. So SoI adds a counterweight to the requirements picture. Customers want SoI - whether they know it or not, whether they state if explicitly or not. In closing A customer´s requirements are not monolithic. They are not all made the same. Rather they fall into different categories. We as developers need to recognize these categories when confronted with some requirement - and take them into account. Only then can we make true professional decisions, i.e. conscious and responsible ones. I call this fundamental trait of software “changeability” and not “flexibility” to distinguish to whom it´s a concern. “Flexibility” to me means, software as is can easily be adapted to a change in its environment, e.g. by tweaking some config data or adding a library which gets picked up by a plug-in engine. “Flexibiltiy” thus is a matter of some user. “Changeability”, on the other hand, to me means, software can easily be changed in its structure to adapt it to new requirements. That´s a matter of the software developer. ?

Read the article

Search Results

Search found 23374 results on 935 pages for 'james may'.

Page 885/935 | < Previous Page | 881 882 883 884 885 886 887 888 889 890 891 892 | Next Page >

- by thatjeffsmith

- by Rick Strahl

- by Tarun Arora [Microsoft MVP]

- by jamiet

- by SGWellens

- by pinaldave

- by DigitalGeekery

- by Ben Griswold

- by Matthew Guay

- by Valter Minute

- by DigitalGeekery

- by pinaldave

- by mv

- by Shaun

- by Bryan

- by The Geek

- by Allan Rwakatungu

- by Erx_VB.NExT.Coder

- by Tony Breyal

- by Ralf Westphal

< Previous Page | 881 882 883 884 885 886 887 888 889 890 891 892 | Next Page >