Search Results

Search found 3251 results on 131 pages for 'firewall'.

Page 89/131 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Trying to get a new user up on VPN

  - by Chris

  Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

  Read the article

• DNS point to server on ISP and keep shared host too?

  - by Dwayne

  I know this is probably quite easy to do, but I might just have the right search sorted out... so here is the situation: We have example.com set up as a hosted server along with app1.example.com, app2.example.com and a few others. What I would like to do is set up the right zone file to also make our internal server addressable from the outside world as internalapp.example.com. This server sits behind a firewall (pfsense) and is hooked up to the world via a cable modem that is technically on DHCP from our ISP, but has had the same external IP for the past 15 months so far. What would be the best way to set this up?

  Read the article

• SSH Server Timeout on port 22 but not on higher port

  - by mikelberger

  If I run an SSH server on my Windows 2008 server box on the default port 22 I always get Operation Timed Out on the client. If I run it on another port (say 2222) it works fine. I've opened up the firewall. Netstat shows that the server is listening on the correct port. I have used two different Windows SSH servers (freeSSHd and WinSSHD) and they both have the same result. What else could be causing the difference between running the SSH server on port 22 versus port 2222?

  Read the article

• Homegroup libraries visible but can't be opened

  - by majocha

  I have 2 Windows 7 PCs in a home network. When I create a homegroup, the libraries I share are visible on the opposing machine but when I doubleclick them nothing happens - no error message, nothing at all. It is the same on both computers. The homegroup works to the extent that the printer I shared is visible and can print from the other computer. Only the libraries are inaccessible. What I tried and checked so far, without result: disabling firewall file and printer sharing, MS Networks client enabled in network properties deleting and recreating homegroup reset homegroup by deleting C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking unsharing and sharing again the libraries

  Read the article

• Setting up Django application on lighttpd behind apache reverse proxy

  - by ml256

  I have a Django app at http://some_other_example.com (it will be behind firewall) running on lighttpd server with fastcgi. I need make it available under http://example.com/myapp. It works fine except for redirects - when I login from http://example.com/myapp/login it redirects me to http://example.com instead of http://example.com/myapp. When logging-in from http://some_other_example.com/login it is ok. My configuration: apache2.conf at example.com: ProxyPass /myapp http://some_other_example.com ProxyPassReverse /myapp http://some_other_example.com ProxyHTMLURLMap http://some_other_example.com /myapp <Location /myapp> SetOutputFilter proxy-html ProxyHTMLExtended On ProxyHTMLURLMap / /myapp/ </Location> in settings.py I added USE_X_FORWARDED_HOST = True but it didn't help

  Read the article

• Random timeout now and then

  - by KenavR

  Maybe this is a to generic question, but since we have this issue for quite a while now, I give it a shot. We have some applications which use HTTP for the connection between the client (website or fat-client) and the server. The Computer who runs this applications is in a Network behind a firewall and a proxy, the server isn't inside the same network. The problem is that every now and then the https Request times out and depending on the Client the Application "hangs" or does some other funky stuff. The problem is definitely inside our network, because if i try the applications outside our network it works fine. Can you give me a hint where i can most likely find the problem?

  Read the article

• Log with iptalbes which user is delivering email to port 25

  - by Maus

  Because we got blacklisted on CBL I set up the following firewall rules with iptables: #!/bin/bash iptables -A OUTPUT -d 127.0.0.1 -p tcp -m tcp --dport 25 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --gid-owner mail -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner root -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner Debian-exim -j ACCEPT iptables -A OUTPUT -p tcp -m limit --limit 15/minute -m tcp --dport 25 -j LOG --log-prefix "LOCAL_DROPPED_SPAM" iptables -A OUTPUT -p tcp -m tcp --dport 25 -j REJECT --reject-with icmp-port-unreachable I'm not able to connect to port 25 from localhost with another user than root or a mail group member - So it seems to work. Still some questions remain: How effective do you rate this rule-set to prevent spam coming from bad PHP-Scripts hosted on the server? Is there a way to block port 25 and 587 within the same statement? Is the usage of /usr/sbin/sendmail also limited or blocked by this rule-set? Is there a way to log the username of all other attempts which try to deliver stuff to port 25?

  Read the article

• What to do if people can't ping me?

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

  Read the article

• how to set up domain name, bad request invalid hostname

  - by user45645

  assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

  Read the article

• TS connection lost but not local

  - by Owl

  I have an office that is connected to a shared db server and terminal services server, that other offices use as well, through a vpn tunnel. For some reason all workstations in the office will lose connectivity to the remote address but will remain connected to their local internet. I have checked both firewalls to ensure all settings match accordingly. They seem to go down at routine times every day and it doesn't last longer than a minute or two. Any ideas of what this may be? OS: Windows Server 2003R2 Terminal Services 5.2 Symantec Gateway 320 & Symantec Firewall/VPN 100

  Read the article

• RDC not working from outside

  - by Cotten

  I've set up Remote Connection according to : http://windows.microsoft.com/is-IS/windows7/allow-remote-desktop-connections-from-outside-your-home-network That is, Allow remote connections to the computer you want to access. Make sure Remote Desktop is able to communicate through your firewall. Find the IP address of the computer on your home network that you want to connect to. Open your router's configuration screen and forward TCP port 3389 to the destination computer's IP address. Find your router's public IP address so that Remote Desktop can find it on the Internet. When I'm inside the LAN, RDC works flawlessly. When I try to connect to the ip given by my ISP it cannot connect. I've setup port forwarding for 3389 on my netgear router. Thanks!

  Read the article

• Is it possible to connect these machines with ssh tunnels or another mechanism?

  - by frankc

  I am physically on a machine that is behind a firewall and cannot be ssh'd into. Let's call that PC. PC can connect out to two machines, one on AWS and one that is part of a vpn connection, call them A and V, respectively. A and V cannot talk to each other directly. I need to frequently move files between A and V and have been doing this by scp'ing to PC and then scp'ing from pc. Is there a better way to do this? A and V are linux but PC has cygwin.

  Read the article

• Getting started with VNC

  - by Stephen

  I have subscribed to a VPS service for the purpose of running some remote applications. To do this I'm going to need a remote desktop of one sort or another. With this in mind it was suggested that I try Ubuntu. The installation that was prepared for me was Ubuntu 11.10 64 bit (Ubuntu 11.10 (GNU/Linux 2.6.18-348.4.1.el5.028stab107.1 x86_64)) From here I used apt-get install ubuntu-desktop which completed successfully. I rebooted the machine and reconnected via ssh. When I attempt to connect from TightVNC on my Windows machine I get a message about the session being actively refused. What should I do to confirm the service is running? Do I need to setup a firewall rule to allow the ports to pass through? (I am a linux newb so explicitness is appreciated)

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• Is A Managed Switch With VLAN Support Required

  - by Justin

  Hello, I am wondering if I need to buy a switch which is managed (VLAN support) for my configuration, or will a cheaper unmanaged switch work? I have servers with two NICS each. The first NIC is public and the second NIC is private. The router will plug into the switch port 1 let's say (public). Then server 1 public plugs into port 2 on the switch, and sever 1 private plugs into port 3 on the switch. The public interface is: 192.168.X.X / 255.255.0.0 and the private interface is 10.0.X.X / 255.255.0.0. So looks like: ** SWITCH ** Port Device Network 1 Router/Firewall 192.168.X.X 2 Server 1 Public 192.168.X.X 3 Server 1 Private 10.0.X.X 4 Server 2 Public 192.168.X.X 5 Server 2 Private 10.0.X.X 6 Server 3 Public 192.168.X.X 7 Server 3 Private 10.0.X.X Thanks.

  Read the article

• Broadband Traffic Question

  - by rutherford

  I have a broadband ADSL line with plus.net in the UK. Having checked the modem there is no firewall or any weird features enabled. But since I arrived at the apartment (the broadband already being installed), I cannot log into Twitter nor update any of my wordpress blogs (I can browse them and log in, but cannot save any edits or new posts). It only seems to affect these two sites in their unique ways. If I take the netbook I use in this place out to say a McDonalds or some other wifi access point then these sites work fine again. Anyone know what could possibly be preventing access of the pages in question? The only thing common to these pages are the POST response they are expecting. But POST form submission works fine on other sites...

  Read the article

• VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

  - by thatidiotguy

  So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

  Read the article

• reverse-proxy web access on a server where only SSH is allowed

  - by Kaii

  Every once in a while i have to connect to a server where access is highly restricted. Only inbound SSH is allowed by the DMZ firewall - outbound HTTP connections are blocked. I'm looking for a good way to tunnel web access through my SSH session, so i can install updates and software via yum / apt-get. What do you do in such a situation? SSH has the -D <port> SOCKS proxy option. But unfortunately it is one-way only from client to server and there is no reverse option.

  Read the article

• Is allowing remote Sql Server Management Studio safe?

  - by dave thieben

  I administer a website that runs on IIS on one box, and SQL Server 2008 Workgroup on another box. typically I remote into the DB box and run SSMS to work on the db, but I would like to be able to access the db directly with SSMS on my local box. I've seen the other questions about allowing remote access to the database, but my question is, is this safe? I'm concerned that I'm opening a hole in the firewall and potential for hack attempts. Is this just a bad idea in general?

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• Intermittent timeout when connecting to Sql Server, what do I look for?

  - by Will

  Sql Server 2008 Standard 64bit on Windows Server 2008 R2 virtual machine hosted on a Hyper-V server. I'm getting intermittent timeouts when connecting to the server. This happens for both windows and Sql Authentication. May timeout every 2 out of 5 tries in different applications. When the connection times out, I can see (in Profiler) that no connection was made. Firewall is holey, server port is static (good ol' 1433). If I ping /t the server I get a steady connection that wavers between 1 and 2 ms. Any ideas what else to try would be appreciated, thanks.

  Read the article

• Mount remote drive by port forwarding

  - by Anushka

  I have a windows 7 computer at home and a remote windows XP machine with an external USB drive attached to it. I would like to be able to copy files to and from home/the remote USB drive. The problem is that the only way of contacting the work computer is by first sshing into a different remote linux machine as there is a firewall that prevents direct internet connection. I can see two possible solutions but I don't know how to do them. Set up winscp using ssh port forwarding via the linux box so that I can copy to and from the two windows machines. I assume that I would need to run an ssh server on the XP machine as well to do this? Mounting the remote USB drive on the remote windows machine from the home XP machine via ssh port forwarding again via the linux box. Does anyone know how to do either solution?

  Read the article

• Url-based web site publishing on Windows Server platform

  - by Maxim V. Pavlov

  I have a Windows 2008 Enterprise SP2 server in a datacenter. It is 32bit OS. I need to be able to do a "smart" url-based web site publishing. So that with a single external IP I can publish many sites on port 80, and some firewall logic resolves, based on a requested URL, which site in IIS gets the request. Forefront TMG 2010 has this feature, but it is not supported on 32bit systems. Is there a software solution that can satissfy my need on Windows 2K8 platform? Thank you. P.S. Perhaps there is a workaround or a tweak to do what I need in IIS?

  Read the article

• centos 5.6, virtual on Vsphere

  - by Glasnhost

  suddenly my virtual centos server (5.6 on VMWare-VSphere) is not working... It started with the url not responding, nor the ip. (NO HTTP response, no ping). When I entered on the server via ssh to start troubleshooting I noticed that most of commands don't work anymore: top- machine hangs (it's not slow anyway) ps - machine hangs (funny enough apache server and web app are running and sending me emails) on some directory ls -l - machine hangs after first file, if ls l.txt the file show only the first file "more" command, also hangs on some file. So there are very little things I can try. I recovered my virtual machine from yesterday and before yesterday, and they show the same behaviour, it hangs on commands (but yesterday they were working). There is no firewall on the machine, there is on the host though. I can connect with ftp but I can't download files nor list directory apart the user top directory... Working hard right now, any idea appreciated

  Read the article

• Fresh Apache install can't be connected to

  - by Wayne M

  I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >