Search Results

Search found 2981 results on 120 pages for 'recommended'.

Page 89/120 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • PTR and A record must match?

    - by somecallmemike
    RFC 1912 Section 2.1 states the following: Make sure your PTR and A records match. For every IP address, there should be a matching PTR record in the in-addr.arpa domain. If a host is multi-homed, (more than one IP address) make sure that all IP addresses have a corresponding PTR record (not just the first one). Failure to have matching PTR and A records can cause loss of Internet services similar to not being registered in the DNS at all. Also, PTR records must point back to a valid A record, not a alias defined by a CNAME. It is highly recommended that you use some software which automates this checking, or generate your DNS data from a database which automatically creates consistent data. This does not make any sense to me, should an ISP keep matching A records for every PTR record? It seems to me that it's only important if the IP address that the PTR record describes is hosting a service that is sensitive to DNS being mismatched (such as email hosting). In that case the forward zone would be configured under a domain name (examples follow the format 'zone - record'): domain.tld -> mail IN A 1.2.3.4 And the PTR record would be configured to match: 3.2.1.in-addr.arpa -> 4 IN PTR mail.domain.tld. Would there be any reason for the ISP to host a forward lookup for an IP address on their network like this?: ispdomain.tld -> broadband-ip-1 IN A 1.2.3.4

    Read the article

  • UPS power requirements for server

    - by captainentropy
    Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

    Read the article

  • Why do manufacturers not show all hardware power usage?

    - by Drew
    I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

    Read the article

  • Join multiple filesystems (on multiple computers) into one big volume

    - by jm666
    Scenario: Have 10 computers, each have 12x2TB HDDs (currently) in raidZ2 (10+2) configuration, so, in the each computer i have one approx. 20TB volume. Now, need those 10 separate computers (separate raid groups) join into one big volume. What is the recommended solution? I'm thinking about the FCoE (10GB ethernet). So, buying into each computer FCoE (10GB ethernet card) and - what need more on the hardware side? (probably another computer, FCoE switch? like Cisco Nexus?) The main question is: what need to install and configure on each computer? Currently they have freebsd/raidz2, but it is possible change it into Linux/Solaris if needed. Any helpful resource what talking about how to build a big volumes from smaller raid-groups (on the software side) is very welcomed. So, what OS, what filesystem, what software - etc. In short: want get one approx. 200TB storage (in one filesystem) from already existing computers/storage. Don't need fast writes, but need good performance on reading data. (as a big fileserver), what will works transparently, so when storing data don't want care about onto what computer the data goes. (e.g. not 10 mountpoints - but one big logical filesystem). Thanks.

    Read the article

  • DDoS nulling to some ips and other options?

    - by Prix
    I am looking for some information in regards DDoS in the follow scenario: I have a server that is behind a Cisco Guard and it will be DDoS'ed, I only care about a set list of IPS that by not means are the attackers. Is it possible to null all other ips but this list to actually get any response to my server or in the long run no matter what I do if they have enough DDoS power I will just go down like a flie ? Is there any recommended company out there that can actually cope with a DDoS ? My server will mainly run several clients that will get connected to a external server and all it needs access to is my local MySQL the the private network so I can access it. There will be no other services runnings such as web or ftp etc at least not to the external ips of the server if i ever have to have any of these service they will be on the private network. The MySQL will be available externally only to 1 safe ip not known by anyone but me and internally at localhost + private network. Are there any solutions ?

    Read the article

  • What to look for in a switch with LAN/WAN verses an iSCSI SAN?

    - by Luke
    I'm setting up a VMWare ESXi 5 environment with 3 server nodes. Dell recommended 2x Force10 S60 switches shared (iSCSI SAN, LAN/WAN). The S60 switches are extremely powerful. They have 1.25 GB of buffer cache, < 9us latency. But they are very expensive (online price ~$15k per switch, actual quote a little less). I've been told that "by the book" you should at least have 2 internal switches for SAN, and 2 switches for LAN/WAN (each with a redundant). I know some of the pros and cons of each approach. What I'm wondering is, would it be more cost effective to disjoin the SAN from LAN with less expensive switches? The answer to this question highlights what I should be looking for in a switch for the SAN. What should I be looking for in a LAN/WAN switch, in comparison to the SAN? With the above linked question for the SAN: How is buffer latency measured? When you see 36 MB of buffer cache, is that shared or per port? So 36 MB would be 768kb or 36MB per port? With 3 to 6 servers how much buffer cache do you really need? What else should I be looking at? Our application will be heavily using HTML5 websockets (high number of persistent connections). The amount of data being sent is small; Data sent between client <- server isn't broadcasted (not a chat/IM service). We will be doing some database reporting too (csv export, sums, some joins). We are a small business and on a budget. We'd probably only be able to spend no more than $20k on switches total (2 or 4).

    Read the article

  • Best way to build / implement a corporate developer Linux distro with multiple kernels?

    - by Garen
    At work we have Linux users who understandably prefer using Ubuntu. Problem is, we also have developer tools that only work with 'officially' supported Linux distributions that use much older 2.6.18 based kernels. (And even if they worked with newer ones, the vendors could always say they won't "support" the software unless it's on one of their 'officially' supported platforms.) We could of course just tell them to use CentOS or something else 2.6.18-based, and I'm sure their response would be something like: "you can take Ubuntu from our cold, dead hands." :) Which brings to me some questions--is there any good/easy/recommended way to run something like Ubuntu as a host VM and Centos 5.x as a guest OS (with which system--Xen,KVM,VMWare, ...?), and then roll that into our own custom internal distribution that could be easily installed? KVM looks like a good high-performance option just recently included in RHEL 5.4, but if hardware support for virtualization like Intel-VT or AMD-V is necessary, then I'd guess only those folks with fairly new PCs will be able to do it. Would be very interested to hear how anyone else has addressed this kind issue. EDIT: The target audience / users of this kind of system would be developers, each one needs to run locally licensed commercial software, so building out some separate beefy central machines isn't an option unfortunately due to license restrictions. Even if that weren't the case, a couple developers could quickly eat up the resources with parallel builds. :) Ideally, I was hoping there was some step-by-step guide out there to build your own pre-built distribution that had e.g. CentOS 5.x and Ubuntu Desktop as a guest.

    Read the article

  • Linux arp cache timeout values

    - by Jak
    I'm trying to configure sane values for the Linux kernel arp cache timeout, but I can't find a detailed explanation as to how they work anywhere. Even the kernel.org documentation doesn't give a good explanation, I can only find recommended values to alleviate overflow. Here is an example of the values I have: net.ipv4.neigh.default.gc_thresh1 = 128 net.ipv4.neigh.default.gc_thresh2 = 512 net.ipv4.neigh.default.gc_thresh3 = 1024 Now, from what I've gathered so far: gc_thresh1 is the number of arp entries allowed before the garbage collector starts removing any entries at all. gc_thresh2 is the soft-limit, which is the number of entries allowed before the garbage collector actively removes arp entries. gc_thresh3 is the hard limit, where entries above this number are aggressively removed. Now, if I understand correctly, if the number of arp entries goes beyond gc_thresh1 but remains below gc_thresh2, the excess will be removed periodically with an interval set by gc_interval. My question is, if the number of entries goes beyond gc_thresh2 but below gc_thresh3, or if the number goes beyond gc_thresh3, how are the entries removed? In other words, what does "actively" and "aggressively" removed mean exactly? I assume it means they are removed more frequently than what is defined in gc_interval, but I can't find by how much.

    Read the article

  • VMM 2012 Adding Hosts in Trusted Forest

    - by Steve Evans
    I have two forests with a two way trust between them. VMM 2012 sits in ForestA and I can discover hosts in ForestA with no issue. When I try to discover hosts in ForestB I hit one of two issues: If I go through the GUI or use Powershell just like I normally do I get the following error on the job: Error (10407) Virtual Machine Manager could not query Active Directory Domain Services. Recommended Action Verify that the domain name and the credentials, if provided, are correct and then try the operation again. It doesn't matter which account I use. I've tried accounts from both forests, with Admin/Domain Admin permissions all over the place, etc Going through the GUI (can't find the switch in Powershell to duplicate this), I check the box "Skip AD Verification" and it causes the GUI to crash during discovery. I found an article (http://technet.microsoft.com/en-us/library/gg610641.aspx) that describes how to add a host in a disjoint namespace (even though that doesn't apply to me) and it says that VMM creates an SPN if one does not exist. So I verified that the correct SPN's exist in ForestB, that did not help the issue. I have a case open with PSS but they are stuck. I have VMM traces if anyone would like to see them. Any suggestions or ideas?

    Read the article

  • Run GUI application via cronjob in Ubuntu?

    - by Christoffer
    Hi, I have a remote server running "Ubuntu 10.04 Desktop". From it I want to run a script that walks through a list of websites and captures screenshots of them. The script is working and thoroughly tested. When I SSH to the server with ssh -X user@ip-adress I can run my script by calling ./myscript.py and everything will work OK. I then modifed my crontab file and added... 59 17 * * * env DISPLAY=:0 /path/to/myscript.py ...as recommended by the Ubuntu WIKI. I can see in the /var/log/syslog that my cron job is started, but it doesn't capture any screenshots. When running env DISPLAY=:0 /path/to/myscript.py from the shell I get No protocol specified myscript.py: cannot connect to X server :0 If I ssh to the server without the -X option I only get the second row of the error: myscript.py: cannot connect to X server :0 What can I try now? More details I have run xhost +local: and checked the output of xhost to see that the option was set correctly. If I run ls /tmp/.X11-unix/ the output is X0 The server only has one screen. Thank you in advance!

    Read the article

  • Good process/software for organizing photos past/present

    - by Matthew
    So I have tons of photos taken all the time. I have a lot from years past that I never went through (meaning deleting duplicates, etc). I've got a new pc with windows 7, and I'm wondering what a good process is to organize those photos. They're in folders that have really no meaning (it used to be people would put them in a folder wherever, even the desktop or somewhere else, not just the My Pictures folder). I'm going to keep all pictures in the "My Pictures" folder from now on. I've used Picasa from g=Google, and it works great. Is this the recommended free software for this? What process do I use to move the old pictures over in to new "organized" folders? Lately in Picasa when I import off my camera card, I would just select something that names the folder after the date it was taken. Is this advised? Just give me ideas on how to stay organized with photos. Should I tag them also? Should I rename the file names? Keep in mind I have over 16,000 photos I'll have to go through, so it can't be anything to thorough.

    Read the article

  • Problems forwarding port 3306 on iptables with CentOS

    - by BoDiE2003
    Im trying to add a forward to the mysql server at 200.58.126.52 to allow the access from 200.58.125.39, and Im using the following rules (its my whole iptables of the VPS of my hosting). I can connect locally at the server that holds the mysql service as localhost, but not from outside. Can someone check if the following rules are fine? Thank you # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp -s 200.58.125.39 --dport 3306 -j ACCEPT -A INPUT -p tcp -s 200.58.125.39 --sport 1024:65535 -d localhost --dport 3306 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -s localhost --sport 3306 -d 200.58.125.39 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT And this is the output of the connection trial. [root@qwhosti /home/qwhosti/public_html/admin/config] # mysql -u user_db -p -h 200.58.126.52 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '200.58.126.52' (113)

    Read the article

  • Smart card driven membership and door entry system

    - by Rob G
    I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

    Read the article

  • Can a website company that builds 4-5 websites a year afford dedicated hosting?

    - by Petras
    We manage about 30 websites that use shared ASP.NET SQL Server web hosting. These are typical small/medium business websites and they perform fine in this environment. Recently I was looking at VPS hosting in this thread http://serverfault.com/questions/128329/how-do-you-host-multiple-public-facing-websites-on-a-vps After contacting a provider in one of the replies I was told that VPS hosting is not recommended for 30 sites, even if they are small. The resource requirements might be too great even for VPS. So I should turn to dedicated hosting. The lowest cost dedicated hosting is $219 per month (see http://www.serverintellect.com/dedicated/pentiumdservers.aspx). But this is only for a single processor which seems too light for a machine running both IIS and SQL. In our office all the developers work on quad cores so I assume I’d really need the Quad Processor. However, this starts at $599 monthly. Now, I won’t be able to transfer all of our 30 sites to this machine. I’d only be able to transfer say 5 or 6. However, moving forward, I’d be able to host all future sites on this machine. This amounts to 4-5 per year. Let’s look at the economics. Shared hosting costs are typically $16.95 monthly (see http://www.crystaltech.com/dotnet.aspx). So here’s the dilemma First months costs: $599 First month revenue: 6x$16.95 = $101.7 Loss in first month: $497.3 First year costs: $599x12=$7188 First month revenue: 6x$16.95x12 + 5x$16.95x6(averaged) = $1728.9 Loss in first year: $5459.1 Clearly it is going to take years for this server to pay for itself. It just doesn’t seem economical! Am I missing something here, or is dedicated not the way to go with the amount of sites we build?

    Read the article

  • secure user-authentication in squid: The Story

    - by Isaac
    once upon a time, there was a beautiful warm virtual-jungle in south america, and a squid server lived there. here is an perceptual image of the network: <the Internet> | | A | B Users <---------> [squid-Server] <---> [LDAP-Server] When the Users request access to the Internet, squid ask their name and passport, authenticate them by LDAP and if ldap approved them, then he granted them. Everyone was happy until some sniffers stole passport in path between users and squid [path A]. This disaster happened because squid used Basic-Authentication method. The people of jungle gathered to solve the problem. Some bunnies offered using NTLM of method. Snakes prefered Digest-Authentication while Kerberos recommended by trees. After all, many solution offered by people of jungle and all was confused! The Lion decided to end the situation. He shouted the rules for solutions: Shall the solution be secure! Shall the solution work for most of browsers and softwares (e.g. download softwares) Shall the solution be simple and do not need other huge subsystem (like Samba server) Shall not the method depend on special domain. (e.g. Active Directory) Then, a very resonable-comprehensive-clever solution offered by a monkey, making him the new king of the jungle! can you guess what was the solution? Tip: The path between squid and LDAP is protected by the lion, so the solution have not to secure it. Note: sorry for this boring and messy story! /~\/~\/~\ /\~/~\/~\/~\/~\ ((/~\/~\/~\/~\/~\)) (/~\/~\/~\/~\/~\/~\/~\) (//// ~ ~ \\\\) (\\\\( (0) (0) )////) (\\\\( __\-/__ )////) (\\\( /-\ )///) (\\\( (""""") )///) (\\\( \^^^/ )///) (\\\( )///) (\/~\/~\/~\/) ** (\/~\/~\/) *####* | | **** /| | | |\ \\ _/ | | | | \_ _________// Thanks! (,,)(,,)_(,,)(,,)--------'

    Read the article

  • The Story of secure user-authentication in squid

    - by Isaac
    once upon a time, there was a beautiful warm virtual-jungle in south america, and a squid server lived there. here is an perceptual image of the network: <the Internet> | | A | B Users <---------> [squid-Server] <---> [LDAP-Server] When the Users request access to the Internet, squid ask their name and passport, authenticate them by LDAP and if ldap approved them, then he granted them. Everyone was happy until some sniffers stole passport in path between users and squid [path A]. This disaster happened because squid used Basic-Authentication method. The people of jungle gathered to solve the problem. Some bunnies offered using NTLM of method. Snakes prefered Digest-Authentication while Kerberos recommended by trees. After all, many solution offered by people of jungle and all was confused! The Lion decided to end the situation. He shouted the rules for solutions: Shall the solution be secure! Shall the solution work for most of browsers and softwares (e.g. download softwares) Shall the solution be simple and do not need other huge subsystem (like Samba server) Shall not the method depend on special domain. (e.g. Active Directory) Then, a very resonable-comprehensive-clever solution offered by a monkey, making him the new king of the jungle! can you guess what was the solution? Tip: The path between squid and LDAP is protected by the lion, so the solution have not to secure it. Note: sorry if the story is boring and messy, but most of it is real! =) /~\/~\/~\ /\~/~\/~\/~\/~\ ((/~\/~\/~\/~\/~\)) (/~\/~\/~\/~\/~\/~\/~\) (//// ~ ~ \\\\) (\\\\( (0) (0) )////) (\\\\( __\-/__ )////) (\\\( /-\ )///) (\\\( (""""") )///) (\\\( \^^^/ )///) (\\\( )///) (\/~\/~\/~\/) ** (\/~\/~\/) *####* | | **** /| | | |\ \\ _/ | | | | \_ _________// Thanks! (,,)(,,)_(,,)(,,)--------'

    Read the article

  • Use GRUB/GRUB2 to PXE boot OS image

    - by Jack
    Asked this in stackoverflow but they recommended I post this here: Here is the situation I am in: I currently have a Windows drive that boots XP. The BIOS does not support PXE booting so this is out of the question. Therefore, I was thinking I could install a customized GRUB bootloader on it instead such that it will have the option to PXE boot an image from a DHCP server connected to it and have the option to load Windows as it normally does (two items in menu). The catch is it may need to be automated (meaning no keyboard), so is there any way to run a script pre-boot during GRUB loading that determines if DHCP / TFTP servers are running and attempt to PXE boot an image from the network (and if not, say timeout of 10 seconds, regularly boot from Windows drive)? If this is not possible, what are some other options / suggestions? I was reading up on grub4dos as well but I'm not sure that is what I need. FWIW, I'm free to do whatever I want to the drive. I'd really appreciate some help on this as I'm not sure where to start. Thanks!

    Read the article

  • secure user-authentication in squid

    - by Isaac
    once upon a time, there was a beautiful warm virtual-jungle in south america, and a squid server lived there. here is an perceptual image of the network: <the Internet> | | A | B Users <---------> [squid-Server] <---> [LDAP-Server] When the Users request access to the Internet, squid ask their name and passport, authenticate them by LDAP and if ldap approved them, then he granted them. Everyone was happy until some sniffers stole passport in path between users and squid [path A]. This disaster happened because squid used Basic-Authentication method. The people of jungle gathered to solve the problem. Some bunnies offered using NTLM of method. Snakes prefered Digest-Authentication while Kerberos recommended by trees. After all, many solution offered by people of jungle and all was confused! The Lion decided to end the situation. He shouted the rules for solutions: Shall the solution be secure! Shall the solution work for most of browsers and softwares (e.g. download softwares) Shall the solution be simple and do not need other huge subsystem (like Samba server) Shall not the method depend on special domain. (e.g. Active Directory) Then, a very resonable-comprehensive-clever solution offered by a monkey, making him the new king of the jungle! can you guess what was the solution? Tip: The path between squid and LDAP is protected by the lion, so the solution have not to secure it. Note: sorry for this boring and messy story! /~\/~\/~\ /\~/~\/~\/~\/~\ ((/~\/~\/~\/~\/~\)) (/~\/~\/~\/~\/~\/~\/~\) (//// ~ ~ \\\\) (\\\\( (0) (0) )////) (\\\\( __\-/__ )////) (\\\( /-\ )///) (\\\( (""""") )///) (\\\( \^^^/ )///) (\\\( )///) (\/~\/~\/~\/) ** (\/~\/~\/) *####* | | **** /| | | |\ \\ _/ | | | | \_ _________// Thanks! (,,)(,,)_(,,)(,,)--------'

    Read the article

  • Howto setup neocomplcache?

    - by eddy
    I just started using vim and saw a cool plugin: [neocomplcache].(http://www.vim.org/scripts/script.php?script_id=2620) My Problem is, that I can't get it to work properly. After installing, I took the example config from the help files of neocomplcache and added the lines to my .vimrc At first I wanted to create a simple latex file (there are snippets for tex). After typing "begi" there appears a menu, I can choose between the snippets with TAB or <C-n>. But how do I get them to expand? <C-k> does not work, but I don't understand why. ======== .vimrc: ======== .... " Plugin key-mappings. imap <C-k> <Plug>(neocomplcache_snippets_expand) smap <C-k> <Plug>(neocomplcache_snippets_expand) inoremap <expr><C-g> neocomplcache#undo_completion() inoremap <expr><C-l> neocomplcache#complete_common_string() " Recommended key-mappings. " <CR>: close popup and save indent. inoremap <expr><CR> neocomplcache#smart_close_popup() ."\<CR>" " <TAB>: completion. inoremap <expr><TAB> pumvisible() ? "\<C-n>" : "\<TAB>" " <C-h>, <BS>: close popup and delete backword char. inoremap <expr><C-h> neocomplcache#smart_close_popup()."\<C-h>" inoremap <expr><BS> neocomplcache#smart_close_popup()."\<C-h>" inoremap <expr><C-y> neocomplcache#close_popup() inoremap <expr><C-e> neocomplcache#cancel_popup() ...

    Read the article

  • "could not find suitable fingerprints matched to available hardware" error

    - by Alex
    I have a thinkpad t61 with a UPEK fingerprint reader. I'm running ubuntu 9.10, with fprint installed. Everything works fine (I am able to swipe my fingerprint to authenticate any permission dialogues or "sudo" prompts successfully) except for actually logging onto my laptop when I boot up or end my session. I receive an error below the gnome login that says "Could not locate any suitable fingerprints matched to available hardware." What is causing this? here are the contents of /etc/pam.d/common-auth file # # /etc/pam.d/common-auth - authentication settings common to all services # # This file is included from other service-specific PAM config files, # and should contain a list of the authentication modules that define # the central authentication scheme for use on the system # (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the # traditional Unix authentication mechanisms. # # As of pam 1.0.1-6, this file is managed by pam-auth-update by default. # To take advantage of this, it is recommended that you configure any # local modules either before or after the default block, and use # pam-auth-update to manage selection of other modules. See # pam-auth-update(8) for details. # here are the per-package modules (the "Primary" block) auth sufficient pam_fprint.so auth [success=1 default=ignore] pam_unix.so nullok_secure # here's the fallback if no module succeeds auth requisite pam_deny.so # prime the stack with a positive return value if there isn't one already; # this avoids us returning an error just because nothing sets a success code # since the modules above will each just jump around auth required pam_permit.so # and here are more per-package modules (the "Additional" block) auth optional pam_ecryptfs.so unwrap # end of pam-auth-update config #auth sufficient pam_fprint.so #auth required pam_unix.so nullok_secure

    Read the article

  • How can I install .NET framework 3.5 on XP machines without internet connection?

    - by EricSchaefer
    I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

    Read the article

  • Many different BSOD

    - by Exa
    I'm experiencing multiple bluescreens for a couple of months now. Their error code is as diverse as their time of occurence... Sometimes it happens during gaming, sometimes when watching videos, sometimes when the computer is idle. These are the bluescreens I see most often: PAGE_FAULT_IN_NONPAGED_AREA KMODE_EXCEPTION_NOT_HANDLED IRQL_NOT_LESS_OR_EQUAL SYSTEM_SERVICE_EXCEPTION SYSTEM_THREAD_EXCEPTION INTERRUPT_EXCEPTION_NOT_HANDLED DRIVER_IRQL_NOT_LESS_OR_EQUAL DRIVER_OVERRAN_STACK_BUFFER Responsible drivers (according to the memory dumps): hal.dll tcpip.sys dxgmms1.sys ndis.sys mouhid.sys atikmdag.sys dump_atapi.sys and of course: ntoskrnl.exe My first thought was a driver incompatibility because I am using Windows 8 and some of the bluescreens seem to come from driver issues. All drivers are up to date. I'm afraid that my memory is broken or the mainboard or both. I used the windows integrated memtest which didn't find any errors. Memtest86 found some errors. Does it make sense to buy new memory? Couldn't it be a problem of the board as well? I also read that my memory could run at a too low voltage. But it's set to 1.5V as recommended. Another guess would be to set the memory's latencies manually, but how do I know which ones to try? Here is a screenshot of bluescreenview showing the latest bluescreens. Maybe someone has faced the same behavior before and found a solution. Any ideas or suggestions? Current setup on which the bluescreens occur. Windows 8 RTM (6.2.9200) Asrock 970 Extreme4 AMD FX-8150 ATI Radeon HD5850 16 GB RAM (DDR3-1800) Latest drivers for all devices

    Read the article

  • Exchange 2010 - Certificate error on internal Outlook 2013 connections

    - by Lorenz Meyer
    I have an Exchange 2010 and Outlook 2003. The exchange server has a wildcard SSL certificate installed *.domain.com, (for use with autodiscover.domain.com and mail.domain.com). The local fqdn of the Exchange server is exch.domain.local. With this configuration there is no problem. Now I started upgrading all Outlook 2003 to Outlook 2013, and I start to get consistently a certificate error in Outlook : The Name on the security certificate is invalid or does not match the name of the site I understand why I get that error: Outlook 2013 is connecting to exch.domain.local while the certificate is for *.domain.com. I was ready to buy a SAN (Subject Alternate Names) Certificate, that contains the three domains exch.domain.local, mail.domain.com, autodiscover.domain.com. But there is a hindrance: the certificate provider (in my case Godaddy) requires that the domain is validated as being our property. Now it is not possible for an internal domain that is not accessible from the internet. So this turns out not to be an option. Create self-signed SAN certificate with an Enterprise CA is an other option that is barely viable: There would be certificate error with every access to webmail, and I had to install the certificate on all Outlook clients. What is a recommended viable solution ? Is it possible to disable certificate checking in Outlook ? Or how could I change the Exchange server configuration so that the public domain name is used for all connections ? Or is there another solution I'm not thinking of ? Any advice is welcome.

    Read the article

  • How to secure an Internet-facing Elastic Search implementation in a shared hosting environment?

    - by casperOne
    (Originally asked on StackOverflow, and recommended that I move it here) I've been going over the documentation for Elastic Search and I'm a big fan and I'd like to use it to handle the search for my ASP.NET MVC app. That introduces a few interesting twists, however. If the ASP.NET MVC application was on a dedicated machine, it would be simple to spool up an instance of Elastic Search and use the TCP Transport to connect locally. However, I'm not on a dedicated machine for the ASP.NET MVC application, nor does it look like I'll move to one anytime soon. That leaves hosting Elastic Search on another machine (in the *NIX world) and I would probably go with shared hosting there. One of the biggest things lacking from Elastic Search, however, is the fact that it doesn't support HTTPS and basic authentication out of the box. If it did, then this question wouldn't exist; I'd simply host it somewhere and make sure to have an incredibly secure password and HTTPS enabled (possibly with a self-signed certificate). But that's not the case. That given, what is a good way to expose Elastic Search over the Internet in a secure way? Note, I'm looking for something that hopefully, will not require writing code to provide shims for the methods that I want (in other words, writing forwarders).

    Read the article

  • sys.dm_exec_query_stats interaction with recompilation

    - by Sam Saffron
    We use sys.dm_exec_query_stats to track down slow queries and queries that are IO offenders. This works great, we get a lot of very insightful stats. It is clear this is not as accurate as running a profiler trace, as you have no idea when SQL Server will decide to chuck out a an execution plan. We have quite a few queries where the wrong execution plan is cached. For example queries like the following: SELECT TOP 30 a.Id FROM Posts a JOIN Posts q ON q.Id = a.ParentId JOIN PostTags pt ON q.Id = pt.PostId WHERE a.PostTypeId = 2 AND a.DeletionDate IS NULL AND a.CommunityOwnedDate IS NULL AND a.CreationDate @date AND LEN(a.Body) 300 AND pt.Tag = @tag AND a.Score 0 ORDER BY a.Score DESC The problem is that the ideal plan really depends on the date selected (screenshot of ideal plan): However if the wrong plan is cached, it totally chokes when the date range is big: (notice the big fat lines) To overcome this we were recommended to use either OPTION (OPTIMIZE FOR UNKNOWN) or OPTION (RECOMPILE) OPTIMIZE FOR UNKNOWN results in a slightly better plan, which is far from optimal. Executions are tracked in sys.dm_exec_query_stats. RECOMPILE results in the best plan being chosen, however no execution counts and stats are tracked in sys.dm_exec_query_stats. Is there another DMV we could use to track stats on queries with OPTION (RECOMPILE)? Is this behavior by-design? Is there another way we can for recompilation while keeping stats tracked in sys.dm_exec_query_stats? Note: the framework will always execute parameterized queries using sp_executesql

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >