Search Results

Search found 11197 results on 448 pages for 'related'.

Page 89/448 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Colorize Monitoring of Logs

    - by Ian
    I sometimes monitor apache and php error logs using tail under FreeBSD. Is there any way to get colorized output, either using tail or some other command line app? Alternatively, what is your favorite way to monitor the various web-related logs in realtime?

    Read the article

  • Possible to direct naked domain to external IP

    - by Luke
    So I found this post: configure Bind to have a custom domain on tumblr and I was trying to ask a related question: Would it be possible to set up an A record pointing traffic to domain.com to Tumblr and feed.domain.com to the IP address of my choice? In other words, by setting up a naked domain A record to Tumblr's IP, will I inherently lose traffic to feed.domain.com? Can I write another A record for the specific subdomains I want to point to my server? I hope this makes sense.

    Read the article

  • Windows 7 explorer always crashes, opens small "Personalized Settings" window

    - by Ian Sellar
    My Windows 7 desktop PC, built by me, started acting very weird in the last couple of days. I use it quite often, about half of the time through TeamViewer. Explorer would crash and restart randomly, almost always through TeamViewer. This made me suspect that TeamViewer was the problem but I have reproduced it with and without TeamViewer several times. The only way I can seem to get the problem not to occur is by booting into Safe Mode. I have used CCleaner and Malwarebytes to make sure it wasn't a registry error or malware causing the problem, and I have tried the fix in the seemly related issue here as well every other fix I have found online including removing security updates KB980408 and KB2926765 as well as using "sfc /scannow" and a bunch of other things I can't remember. More recently when I try to start explorer it is popping up a small window that says "Personalized Settings" on the top, but is completely empty and crashes instantly. The only way I can get it to disappear is to kill the explorer.exe process. I wish I could take a screenshot but I can't seem to open paint or even find the exe. I have tried restarting it, I have tried starting it while the personalized settings window was open. I have come up with two lists of processes the first is the list of active processes when I boot into safe mode and explorer seems to work fine. The second is the list of processes that I can narrow it down to in normal boot and still replicate the problem. There is one process that I can't seem to close. NisSrv.exe which is describes as "Microsoft Network Realtime Inspection Service". When I try to close the process NisSrv.exe it says "The operation could not be completed. Access is denied." When I try to close the related service it gives the same message. Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 2,660 K smss.exe 304 Services 0 1,196 K csrss.exe 408 Services 0 4,156 K wininit.exe 444 Services 0 4,608 K csrss.exe 452 Console 1 8,700 K services.exe 492 Services 0 7,700 K winlogon.exe 524 Console 1 5,756 K lsass.exe 536 Services 0 10,644 K lsm.exe 544 Services 0 4,316 K svchost.exe 652 Services 0 8,976 K MsMpEng.exe 804 Services 0 40,696 K explorer.exe 1332 Console 1 85,220 K ctfmon.exe 1376 Console 1 3,680 K dllhost.exe 1624 Console 1 8,656 K chrome.exe 1408 Console 1 98,504 K WmiPrvSE.exe 2352 Services 0 6,472 K chrome.exe 1744 Console 1 65,116 K taskmgr.exe 372 Console 1 14,948 K cmd.exe 2776 Console 1 2,960 K conhost.exe 1816 Console 1 3,580 K tasklist.exe 2308 Console 1 5,868 K And the list of processes I have narrowed it down to. Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 2,808 K smss.exe 316 Services 0 1,216 K csrss.exe 484 Services 0 4,532 K wininit.exe 596 Services 0 4,604 K csrss.exe 604 Console 1 23,676 K services.exe 652 Services 0 11,344 K lsass.exe 668 Services 0 12,692 K lsm.exe 676 Services 0 4,464 K MsMpEng.exe 972 Services 0 68,436 K winlogon.exe 168 Console 1 7,784 K svchost.exe 496 Services 0 19,140 K NisSrv.exe 3176 Services 0 808 K svchost.exe 1684 Services 0 11,260 K taskmgr.exe 4524 Console 1 20,696 K cmd.exe 4764 Console 1 7,224 K conhost.exe 4772 Console 1 6,916 K sublime_text.exe 2340 Console 1 45,012 K dllhost.exe 4476 Console 1 8,736 K tasklist.exe 3796 Console 1 5,768 K WmiPrvSE.exe 1768 Services 0 6,344 K Here is the event data xml from event viewer for the error I am getting. <EventData> <Data>explorer.exe</Data> <Data>6.1.7601.17567</Data> <Data>4d672ee4</Data> <Data>vrfcore.dll</Data> <Data>6.3.9600.16384</Data> <Data>5215f8f5</Data> <Data>80000003</Data> <Data>0000000000003a00</Data> <Data>12e4</Data> <Data>01cfb84fa70f89dc</Data> <Data>C:\Windows\system32\explorer.exe</Data> <Data>C:\Windows\SYSTEM32\vrfcore.dll</Data> <Data>e5957093-2442-11e4-9f8a-94de806ed9cb</Data> </EventData> I was looking through the eventvwr log again and I found this, possibly related <EventData> <Data>runonce.exe</Data> <Data>6.1.7601.17514</Data> <Data>4ce7a253</Data> <Data>MSVCR100.dll</Data> <Data>10.0.40219.325</Data> <Data>4df2bcac</Data> <Data>c0000005</Data> <Data>000000000003c145</Data> <Data>670</Data> <Data>01cfb8dabbd85942</Data> <Data>C:\Windows\system32\runonce.exe</Data> <Data>C:\Windows\system32\MSVCR100.dll</Data> <Data>fa6f82b9-24cd-11e4-80a8-94de806ed9cb</Data> </EventData> And the general error details Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4 Faulting module name: vrfcore.dll, version: 6.3.9600.16384, time stamp: 0x5215f8f5 Exception code: 0x80000003 Fault offset: 0x0000000000003a00 Faulting process id: 0xc38 Faulting application start time: 0x01cfb84e5e852c5f Faulting application path: C:\Windows\Explorer.EXE Faulting module path: C:\Windows\SYSTEM32\vrfcore.dll Report Id: 9dc19e6d-2441-11e4-9f8a-94de806ed9cb Another probably unrelated error that I seem to be getting pretty often. Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. My explorer tab in Autoruns seen below along with the error when I try to uncheck something. I should add that I seem to be able to disable shell extensions with ShellExView but I still can't get explorer to start correctly. EXPLORER SHELL UPDATE - See screenshot below I can access the explorer right click menu through a file manager I downloaded called NexusFile, but still no luck starting explorer. Another round of errors that I am getting regarding Windows Search Service The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index. Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) followed by The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt. Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801 and The plug-in in <Search.JetPropStore> cannot be initialized. Context: Windows Application, SystemIndex Catalog Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) and The gatherer object cannot be initialized. Context: Windows Application, SystemIndex Catalog Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) and The Windows Search Service cannot load the property store information. Context: Windows Application, SystemIndex Catalog Details: The content index database is corrupt. (HRESULT : 0xc0041800) (0xc0041800) WER Log http://pastebin.com/WXKGDT4Q I'll add information as I remember it or people request it.

    Read the article

  • Microsoft PKI or PKI Vendor ?

    - by abmv
    I have a question related to PKI Infrastructure , should an organization go with Microsoft PKI or an independent separate PKI Infrastructure ? Is there any licensing restrictions if I user Microsoft PKI Infrastructure ? Or should I get an independent PKI infrastructure from a vendor that offer PKI TSA and SP(Signature Proof) Infrastructure.

    Read the article

  • Netgear FVS336G as VPN Server

    - by Farseeker
    Hi All, One of our offices has made the move away from PFSense to a Netgear FVS336G. The one feature I can't seem to figure out is its VPN capabilities. I'm confused as to whether this device can act as a IPSEC VPN server, or if it can only act as the client in a Site-Site VPN. The documentation does not make this clear at all, and Google does not seem to have been any help. (Related question: here)

    Read the article

  • Why won't my Nokia E52 charge on some USB ports

    - by snot
    I have two computers. If I connect my Nokia to one of them using the usb cable the charge process will start. If I connect the phone to the other computer (using the same cable!) it won't start charging. Any suggestions what the problem is? (I couldn't find a usb related difference between both computers)

    Read the article

  • Identifying cause of Software opening hundreds of thousands of handles

    - by user428370
    I have a user running the latest public revision of IBM Notes (8.5.4) on a Windows 7 Pro OA installation. Under his profile and only his, when the software is run, the software opens hundreds of thousands of handles, regarding token queries. This involves only this specific user, on his computer, using only said software. I have narrowed down the issue to being related to his profile but am unsure of what to look at next. Any advice would be appreciated.

    Read the article

  • Ubuntu Terminal launch applications on different workspace

    - by drahcir
    I am trying to write a group of bashscripts to launch a set of applications on different workspaces. Reason being so that I can for example set up a script that launches all my dev related applications on the workspaces I usually put them on. I am looking for a command like ws -2 foo Which would launch the foo application on workspace 2 I tried looking through google but to no avail. Any suggestions?

    Read the article

  • GPO Software Uninstall Not Taking Place

    - by burmat
    I am having some trouble with my software GPO's and can't seem to find any answers using Google. I successfully deployed software using my policy but when I delete another, the uninstallation of the software does not take place. What I did: Deployed software using a GPO, used gpupdate /force on the workstation to update, reboot, and install the software Deleted another software installation by: Right-Click All Tasks Remove 'Immediately uninstall the software from users and computers' From there, I did another gpupdate /force to try and get the GPO to refresh and uninstall the software on the workstation. This did not work. I then forced replication between my domain controllers and ran another gpupdate /force on the workstation and this did not uninstall the software. There are not error logs or indications that the uninstall is being triggered when I go into the event viewer, and I know for a fact that the policy is working in other aspects. So my questions is: Where do I look next to find the answer as to why GPO software deployments are working but un-installations are not, based off of what I have already tried? Thank you in advance. UPDATE: After using gpresult /z, there is no indication of a pending un-installation or removal of software. Under the section entitled "Software Installations", the software I am trying to uninstall is not listed. There is no other indication that the software I am trying to uninstall even exists. I also turned on RSoP logging and did (yet another) gpupdate /force to yield no blatant results. There is no indication that an uninstall event was even triggered, let alone incapability or failure. Although I am sure I marked it to uninstall in case of two events (the falling out of the scope of management, as well as the removal of the entry), I am beginning to think the entry just never triggered something that should have been triggered. UPDATE #2: After troubleshooting this (frustrating) application assignment, I have chalked it up as a fluke. I have tested with other software to make sure that the uninstall of other application assignments is actually working, so I am assuming it is something related to the package directly. There is the possibility that my problem resides in something related to what @joeqwerty linked in a comment below but because I can't go back in time, I don't think I will be able to prove it. I will probably be running a script via another GPO to guarantee the un-installation of left over package installs. For now, Evan Anderson is getting the answer because of the debugging information I was able to put to good use. Thank you to everyone that helped contribute so far!

    Read the article

  • Redirect local service to custom proxy

    - by Pedro Laguna
    Hello, I'm trying to create a custom proxy program but I have a problem. My program connects to a fixed port from a random port and I need to tunnel all this traffic by my local proxy. I think the solution is using iptables, but all the topics I found are related to redirect incoming connections, not outbounds. How can I redirect all the traffic from a local port to another local port and later to the internet? Thanks,

    Read the article

  • Centos does not open port/s after the rule/s are appended

    - by Charlie Dyason
    So after some battling and struggling with the firewall, i see that I may be doing something or the firewall isnt responding correctly there is has a port filter that is blocking certain ports. by the way, I have combed the internet, posted on forums, done almost everything and now hence the website name "serverfault", is my last resort, I need help What I hoped to achieve is create a pptp server to connect to with windows/linux clients UPDATED @ bottom Okay, here is what I did: I made some changes to my iptables file, giving me endless issues and so I restored the iptables.old file contents of iptables.old: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT after iptables.old restore(back to stock), nmap scan shows: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:54 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 997 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.95 seconds if I append rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:58 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.77 seconds *notice it allows and opens port 443 but no other ports, and it removes port 113...? removing previous rule and if I append rule: (allow and open port 80 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:01 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.12 seconds *notice it removes port 443 and allows 80 but is closed without removing previous rule and if I append rule: (allow and open port 1723 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:05 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.16 seconds *notice no change in ports opened or closed??? after removing rules: iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 998 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident Nmap done: 1 IP address (1 host up) scanned in 5.15 seconds and returning rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.87 seconds notice the eth0 changes the 999 filtered ports to 858 filtered ports, 139 closed ports QUESTION: why cant I allow and/or open a specific port, eg. I want to allow and open port 443, it doesnt allow it, or even 1723 for pptp, why am I not able to??? sorry for the layout, the editor was give issues (aswell... sigh) UPDATE @Madhatter comment #1 thank you madhatter in my iptables file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT # ----------all rules mentioned in post where added here ONLY!!!---------- -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT if I want to allow and open port 1723 (or edit iptables to allow a pptp connection from remote pc), what changes would I make? (please bear with me, my first time working with servers, etc.) Update MadHatter comment #2 iptables -L -n -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 9 660 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 3 0 0 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 4 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 6 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT 6 packets, 840 bytes) num pkts bytes target prot opt in out source destination just on a personal note, madhatter, thank you for the support , I really appreciate it! UPDATE MadHatter comment #3 here are the interfaces ifconfig eth0 Link encap:Ethernet HWaddr 00:1D:D8:B7:1F:DC inet addr:[server ip] Bcast:[server ip x.x.x].255 Mask:255.255.255.0 inet6 addr: fe80::21d:d8ff:feb7:1fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36692 errors:0 dropped:0 overruns:0 frame:0 TX packets:4247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2830372 (2.6 MiB) TX bytes:427976 (417.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) remote nmap nmap -p 1723 [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-01 16:17 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). PORT STATE SERVICE 1723/tcp filtered pptp Nmap done: 1 IP address (1 host up) scanned in 0.51 seconds local nmap nmap -p 1723 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-01 16:19 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000058s latency). Other addresses for localhost (not scanned): 127.0.0.1 PORT STATE SERVICE 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.11 seconds UPDATE MadHatter COMMENT POST #4 I apologize, if there might have been any confusion, i did have the rule appended: (only after 3rd post) iptables -A INPUT -p tcp --dport 1723 -j ACCEPT netstat -apn|grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1142/pptpd There are not VPN's and firewalls between the server and "me" UPDATE MadHatter comment #5 So here is an intersting turn of events: I booted into windows 7, created a vpn connection, went through the verfication username & pword - checking the sstp then checking pptp (went through that very quickly which meeans there is no problem), but on teh verfication of username and pword (before registering pc on network), it got stuck, gave this error Connection failed with error 2147943625 The remote computer refused the network connection netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - I do not know what it means but seems like there is progress..., any thoughts???

    Read the article

  • App to log network user's file activities

    - by Luke
    My employer recently purchased a Mac Pro server (2011 model) and we've installed OSX Lion Server from the Mac Appstore. I'm definitely no server admin, but I have been tasked with finding out the following: Can we monitor or log what users do? (ie, open a file, copy a file.... or file-related tasks) Can we stop files from being copied? Or be alerted when this does occur? Thanks in advance for any assistance.

    Read the article

  • Domain regisration in Godaddy and Hosting in Plesk

    - by Dipen
    Guys, I bought new domain in GOdaddy and host the site in plesk 9.2.2 . How to related these two. While i adding the domain in plesk it automatically added 10 DNS records like A ,CNAME,MX. but in godaddy it shows some name server . What about the next step. need to update A record in Godaddy or Please guide me. Its very urgent request

    Read the article

  • which collaborative tools do you use to communicate between team members

    - by john
    I work for a small company and would like to set up some sort of a collaborative tool so that team members can share thoughts, upload documents...something like sharepoint maybe, but not that suffisticated. Only good option I've seen so far is joomla CMS. Just want to get an opinion of the community on which tools they have used for these purposes. I know this is not programming related but I thought stackoverflow community would be good to get an opinion on this.

    Read the article

  • Porting GNOME keyboard shortcuts to URXVT

    - by fpga_boffin
    I recently switched from gnome terminal to urxvt (and installed tabbed extensions). I am also a heavy emacs user which uses a lot of key combinations similar to urxvt (tab related stuff) like Shift-Left and Shift-Right. These key-combinations are set for selecting text in emacs. Is there a way to map ALT-1, ALT-2, ALT-3 for tabs 1, 2, 3 ..? Is there an extension to do that ? Can it be achieved through the ~/.Xdefaults file ?

    Read the article

  • Internet is a series of tubes?

    - by Zoredache
    Almost all of use have heard of Ted Stevens trying to describe the Internet with the analogy that it is a series of tubes (mp3). I believe that it likely that some tech person somewhere tried to describe the Internet to him and this was the best analogy they could come up with. What analogy would you use to describe the Internet, and issues related to bandwidth, latency, etc, to your grandmother or someone else with no IT experience.

    Read the article

  • Helicon ISAPI_REWRITE for masking folder

    - by Brian
    Hello, I would like to use the ISAPI_REWRITE module to rewrite a url: www.site.com/app/ to www.site.com So that the user doesn't see the folder where the application is... the reason why isn't important, but essentially I need to mask this folder due to an IIS structure change. Any help would be appreciated. I need to remap any requested file in the app directory and any related subdirectory to the main URL. Thanks.

    Read the article

  • Does DFSR replicate shadow copies?

    - by Jeff Sacksteder
    There a a few questions related to using DFSR and Shadow Copies together, but none that indicates if Shadow Copies replicate or not. Meaning, if I have a a pair of DFS replicas with Shadow Copies on Server-A, can I revert that file to a previous version on Server-B? If so, will that reversion be replicated back to Server-A? I suspect not- that VSS is a local NTFS feature and outside the scope of replication, but I cannot verify that myself at the moment.

    Read the article

  • Things IT needs to do for compliance in a private company?

    - by SQL Baba
    My company is a private, family owned business. The company is head quartered in USA and also runs businesses in several countries including Mexico, UK, Canada, Carribean islands and few other countries in S.America. Me and my boss had a discussion over lunch regarding IT compliance and we wondered what kind of mail archiving solution we need to pursue and what are the other IT related compliance we need to pursue. Our processes include online and phone based sales, phone based customer support, w-9 (SSN and EIN) verification, etc.

    Read the article

  • How can I protect Chrome user interface?

    - by Renan
    Google Chrome has a feature to change between Google accounts which allows several users to have their customized extensions, history and whatnot retrieved instantly. It doesn't, however, protect someone else from checking anything google related. That means anyone with access to your computer can check every google account that was setup as user in Chrome. How can I prevent that? I first thought of checking a box with the option to have Chrome request for password upon user change but that doesn't seem to exist.

    Read the article

  • Windows 8 Installation doesn't detect my SATA Maxtor 6V250F0 HDD

    - by dosaki
    I've been using Ubuntu on a desktop computer I have in my house and I'd like to try to install Windows 8 and replace the Ubuntu system. In the installation wizard of Windows 8 I get stuck in the point where I have to specify the HDD to install the OS to. The problem is that I cannot see any hard disk drive to select. I believe this may be related to drivers but I don't know where to get them. Can anyone help me with this?

    Read the article

  • Cisco ASA 5505 VPN setup

    - by Guillaume
    Hello, I'm trying to setup a site to site VPN, with a Cisco ASA 5505 at one end. The documentation tells me to use the Ipsec VPN wizard but under the wizards drop down menu there's nothing VPN related there. I have a 'base' license, is that the issue? or am I being stupid? The versions I have are: Cisco Asa 5505 with ASA 8.2(1) and ASDM 6.2(1), the firewall was already setup when I got it (I'm leasing a dedicated server). Thanks for your help

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >