Search Results

Search found 23603 results on 945 pages for 'non technical manager'.

Page 895/945 | < Previous Page | 891 892 893 894 895 896 897 898 899 900 901 902  | Next Page >

  • Why can I resolve this hostname but not a cname to this hostname?

    - by Joe Hopfgartner
    if a run dig against a hostname, i get the according cname, however i get an NXDOMAIN error (non existent domain). if i run dig against the cname i got, I can resolve it to an IP address successfully. It is reproduceable. On the system I am currently on it is always the case, on other systems it sometimes works and sometimes not, and on other systems it seems to work all the time. If i run using a nameserver i specify (for example googles public nameserver) i can successfully resolve the hostname. i would just blame the local system, but it seems i am not having the only one problems the 2nd domain (unrestrict.me) is hosted on amazon route 53 nameservers. the 1st one on another dns server which has proofen to be fully functional and reliable over the years. i once switchted with the other domain to amazon dns as well, everything seemed to work, also various dns health check tests reported fine, however i recieved a lot of support tickets that dns resolution would not work. is amazon just "bad" or am i doing something wrong? i did not tamper with the domain in any way on the local system (in case of caching or making a custom dns view or whatever...) joe@joe:~$ dig scorpion.premiumize.me ; <<>> DiG 9.8.1-P1 <<>> scorpion.premiumize.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 10222 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;scorpion.premiumize.me. IN A ;; ANSWER SECTION: scorpion.premiumize.me. 180 IN CNAME alpha.nue.scorpion.unrestrict.me. ;; Query time: 28 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 18 10:28:39 2012 ;; MSG SIZE rcvd: 84 joe@joe:~$ dig alpha.nue.scorpion.unrestrict.me ; <<>> DiG 9.8.1-P1 <<>> alpha.nue.scorpion.unrestrict.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25381 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;alpha.nue.scorpion.unrestrict.me. IN A ;; ANSWER SECTION: alpha.nue.scorpion.unrestrict.me. 300 IN A 78.46.25.130 ;; Query time: 48 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 18 10:28:47 2012 ;; MSG SIZE rcvd: 66 joe@joe:~$

    Read the article

  • When searching in Outlook, encountered this error "Instant Search encountered a problem while trying

    - by Imagineer
    Sometime when searching for certain keyword, I get this error "Instant Search encountered a problem while trying to display search results. Modifying your query may resolve this problem." I have enabled Outlook logging to determine what is the error as suggested by someone in other forum. but I haven't had a clue how to decipher it. 2010.05.11 09:38:10 <<<< Logging Started (level is LTF_TRACE) >>>> 2010.05.11 09:38:10 HELPER::Initialize called 2010.05.11 09:38:10 Initializing: Finding a Transport 2010.05.11 09:38:10 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: TransportLogon, hr = 0x8004011d 2010.05.11 09:38:10 MAPI XP Call: Shutdown, hr = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000 2010.05.11 09:38:10 MAPI Status: (-- -- ---/--- -- ---) 2010.05.11 09:38:10 MAPI XP Call: TransportLogon, hr = 0x00000000 2010.05.11 09:38:10 Initializing: Found a transport, Error code = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 4, cUids = 1 2010.05.11 09:38:10 MAPI XP Call: RegisterOptions, hr = 0x00000000, cOptions = 2 2010.05.11 09:38:10 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:10 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000 2010.05.11 09:38:10 HELPER::Initialize done, Error code = 0x00000000 2010.05.11 09:38:10 HELPER::GetCapabilities called, Error code = 0x00000000 2010.05.11 09:38:10 Microsoft Exchange: Synch operation started (flags = 00000031) 2010.05.11 09:38:10 Microsoft Exchange: StartImport(flags = 00000000, max msg = ffffffff): full items 2010.05.11 09:38:10 Microsoft Exchange: UploadItems: 0 messages to send 2010.05.11 09:38:11 Starting the Spooling Cycle 2010.05.11 09:38:11 MAPI Status: (IN fl ---/OUT -- ---) 2010.05.11 09:38:11 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c 2010.05.11 09:38:11 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 855 2010.05.11 09:38:11 Progress: Receiving message (message 1 out of 856, size unknown) 2010.05.11 09:38:11 Downloading one message 2010.05.11 09:38:11 Transport tightly coupled with store, download is NOOP 2010.05.11 09:38:11 Downloading done, Error code = 0x8004010f 2010.05.11 09:38:11 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:11 FINISHED MAPI TASK 2010.05.11 09:38:11 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 09:38:11 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 09:38:11 EXECUTING EndSession MAPI TASK 2010.05.11 09:38:11 Starting the Simplified Transfer Cycle 2010.05.11 09:38:11 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 855 2010.05.11 09:38:11 Progress: Receiving message (message 1 out of 856, size unknown) 2010.05.11 09:38:11 Downloading one message 2010.05.11 09:38:11 MAPI Status: (IN -- act/OUT -- ---) 2010.05.11 09:38:11 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:11 Downloading done, Error code = 0x8004010f 2010.05.11 09:38:11 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 09:38:11 FINISHED MAPI TASK 2010.05.11 09:38:11 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 09:38:11 Microsoft Exchange: Synch operation completed 2010.05.11 10:08:15 Microsoft Exchange: Synch operation started (flags = 00000031) 2010.05.11 10:08:15 Microsoft Exchange: StartImport(flags = 00000000, max msg = ffffffff): full items 2010.05.11 10:08:15 Microsoft Exchange: UploadItems: 0 messages to send 2010.05.11 10:08:16 Starting the Spooling Cycle 2010.05.11 10:08:16 MAPI Status: (IN fl ---/OUT -- ---) 2010.05.11 10:08:16 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c 2010.05.11 10:08:16 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 858 2010.05.11 10:08:16 Progress: Receiving message (message 1 out of 859, size unknown) 2010.05.11 10:08:16 Downloading one message 2010.05.11 10:08:16 Transport tightly coupled with store, download is NOOP 2010.05.11 10:08:16 Downloading done, Error code = 0x8004010f 2010.05.11 10:08:16 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 10:08:16 FINISHED MAPI TASK 2010.05.11 10:08:16 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 10:08:16 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 10:08:16 EXECUTING EndSession MAPI TASK 2010.05.11 10:08:16 Starting the Simplified Transfer Cycle 2010.05.11 10:08:16 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 858 2010.05.11 10:08:16 Progress: Receiving message (message 1 out of 859, size unknown) 2010.05.11 10:08:16 Downloading one message 2010.05.11 10:08:16 MAPI Status: (IN -- act/OUT -- ---) 2010.05.11 10:08:16 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 10:08:16 Downloading done, Error code = 0x8004010f 2010.05.11 10:08:16 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 10:08:16 FINISHED MAPI TASK 2010.05.11 10:08:16 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 10:08:16 Microsoft Exchange: Synch operation completed 2010.05.11 10:09:48 HELPER::Uninitialize called 2010.05.11 10:09:48 MAPI Status: (-- -- ---/--- -- ---) 2010.05.11 10:09:48 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000 2010.05.11 10:09:48 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000 2010.05.11 10:09:48 MAPI XP Call: Shutdown, hr = 0x00000000 2010.05.11 10:09:48 Resource manager terminated I'm running Outlook 2007 SP1 in Citrix environment and should be running in Cache Mode. In my Outlook Tools-Options-Search Option, there is nothing under indexing. Any help is greatly appreciated! Thank you.

    Read the article

  • Diagnosing Solaris 8 server memory and swap space usage

    - by datSilencer
    Hello everyone. Essentially, my question is related to memory allocation for Solaris virtual machines. I am running a couple of old Sun ONE 6 Java web servers on two Solaris 8 virtual machines. I see that there's a reasonable amount of swap space being used, but I'm not exactly sure if this could indicate a need to add more RAM to these machines. At service peak hours (mornings usually), the response time of the web application these servers host jumps up to at most 11 seconds (somewhat detrimental for a relatively simple web page loading action). Average response time at non peak times is about 5 seconds. What would you be able to infer about the RAM usage for these machines from the ouput below? Is this information reasonably sufficient? Or would I need to run some other commands to rule out server memory starvation? Finally, since there is a Java application at the core of the setup, I've also thought about: 1) Trace the heap's Object allocation to detect potential memory leaks. 2) Do some performance profiling to see if this instead related to networking delays. I mention this since the application talks with a single Oracle Database, but I would doubt this to be the case since they're pretty close from a network segmentation perspective. I appreciate any kind of insight and feedback you could provide. Thanks for your time and help. Server 1: 40 processes: 38 sleeping, 1 zombie, 1 on cpu CPU states: 99.1% idle, 0.4% user, 0.4% kernel, 0.0% iowait, 0.0% swap Memory: 2048M real, 295M free, 865M swap in use, 3788M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 12676 webservd 112 29 10 616M 242M sleep 103:37 0.48% webservd 18317 root 1 59 0 23M 19M sleep 67:24 0.08% perl 9479 support 1 59 0 6696K 2448K cpu/1 0:11 0.05% top 8012 root 10 59 0 34M 704K sleep 80:54 0.04% java 1881 root 33 29 10 110M 13M sleep 33:03 0.02% webservd 7808 root 1 59 0 83M 67M sleep 7:59 0.00% perl 1461 root 20 59 0 5328K 1392K sleep 6:49 0.00% syslogd 1691 root 2 59 0 27M 680K sleep 4:22 0.00% webservd 24386 root 1 59 0 15M 11M sleep 2:50 0.00% perl 23259 root 1 59 0 11M 4240K sleep 2:42 0.00% perl 24718 root 1 59 0 11M 5464K sleep 2:29 0.00% perl 22810 root 1 59 0 19M 11M sleep 2:21 0.00% perl 24451 root 1 53 2 11M 3800K sleep 2:18 0.00% perl 18501 root 1 56 1 11M 3960K sleep 2:18 0.00% perl 14450 root 1 56 1 15M 6920K sleep 1:49 0.00% perl Server 2 42 processes: 40 sleeping, 1 zombie, 1 on cpu CPU states: 98.8% idle, 0.4% user, 0.8% kernel, 0.0% iowait, 0.0% swap Memory: 1024M real, 31M free, 554M swap in use, 3696M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 5607 webservd 74 29 10 284M 173M sleep 20:14 0.21% webservd 15919 support 1 59 0 4056K 2520K cpu/1 0:08 0.09% top 13138 root 10 59 0 34M 1952K sleep 210:51 0.08% java 13753 root 1 59 0 22M 12M sleep 170:15 0.07% perl 22979 root 33 29 10 112M 7864K sleep 85:07 0.04% webservd 22930 root 1 59 0 3424K 1552K sleep 17:47 0.01% xntpd 22978 root 2 59 0 27M 2296K sleep 10:49 0.00% webservd 13571 root 1 59 0 9400K 5112K sleep 5:52 0.00% perl 5606 root 2 29 10 29M 9056K sleep 0:36 0.00% webservd 15910 support 1 59 0 9128K 2616K sleep 0:00 0.00% sshd 13106 root 1 59 0 82M 3520K sleep 7:47 0.00% perl 13547 root 1 59 0 12M 5528K sleep 6:38 0.00% perl 13518 root 1 59 0 9336K 3792K sleep 6:24 0.00% perl 13399 root 1 56 1 8072K 3616K sleep 5:18 0.00% perl 13557 root 1 53 2 8248K 3624K sleep 5:12 0.00% perl

    Read the article

  • Diagnosing packet loss / high latency in Ubuntu

    - by Sam Gammon
    We have a Linux box (Ubuntu 12.04) running Nginx (1.5.2), which acts as a reverse proxy/load balancer to some Tornado and Apache hosts. The upstream servers are physically and logically close (same DC, sometimes same-rack) and show sub-millisecond latency between them: PING appserver (10.xx.xx.112) 56(84) bytes of data. 64 bytes from appserver (10.xx.xx.112): icmp_req=1 ttl=64 time=0.180 ms 64 bytes from appserver (10.xx.xx.112): icmp_req=2 ttl=64 time=0.165 ms 64 bytes from appserver (10.xx.xx.112): icmp_req=3 ttl=64 time=0.153 ms We receive a sustained load of about 500 requests per second, and are currently seeing regular packet loss / latency spikes from the Internet, even from basic pings: sam@AM-KEEN ~> ping -c 1000 loadbalancer PING 50.xx.xx.16 (50.xx.xx.16): 56 data bytes 64 bytes from loadbalancer: icmp_seq=0 ttl=56 time=11.624 ms 64 bytes from loadbalancer: icmp_seq=1 ttl=56 time=10.494 ms ... many packets later ... Request timeout for icmp_seq 2 64 bytes from loadbalancer: icmp_seq=2 ttl=56 time=1536.516 ms 64 bytes from loadbalancer: icmp_seq=3 ttl=56 time=536.907 ms 64 bytes from loadbalancer: icmp_seq=4 ttl=56 time=9.389 ms ... many packets later ... Request timeout for icmp_seq 919 64 bytes from loadbalancer: icmp_seq=918 ttl=56 time=2932.571 ms 64 bytes from loadbalancer: icmp_seq=919 ttl=56 time=1932.174 ms 64 bytes from loadbalancer: icmp_seq=920 ttl=56 time=932.018 ms 64 bytes from loadbalancer: icmp_seq=921 ttl=56 time=6.157 ms --- 50.xx.xx.16 ping statistics --- 1000 packets transmitted, 997 packets received, 0.3% packet loss round-trip min/avg/max/stddev = 5.119/52.712/2932.571/224.629 ms The pattern is always the same: things operate fine for a while (<20ms), then a ping drops completely, then three or four high-latency pings (1000ms), then it settles down again. Traffic comes in through a bonded public interface (we will call it bond0) configured as such: bond0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:5d inet addr:50.xx.xx.16 Bcast:50.xx.xx.31 Mask:255.255.255.224 inet6 addr: <ipv6 address> Scope:Global inet6 addr: <ipv6 address> Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:527181270 errors:1 dropped:4 overruns:0 frame:1 TX packets:413335045 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240016223540 (240.0 GB) TX bytes:104301759647 (104.3 GB) Requests are then submitted via HTTP to upstream servers on the private network (we can call it bond1), which is configured like so: bond1 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:5c inet addr:10.xx.xx.70 Bcast:10.xx.xx.127 Mask:255.255.255.192 inet6 addr: <ipv6 address> Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:430293342 errors:1 dropped:2 overruns:0 frame:1 TX packets:466983986 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:77714410892 (77.7 GB) TX bytes:227349392334 (227.3 GB) Output of uname -a: Linux <hostname> 3.5.0-42-generic #65~precise1-Ubuntu SMP Wed Oct 2 20:57:18 UTC 2013 x86_64 GNU/Linux We have customized sysctl.conf in an attempt to fix the problem, with no success. Output of /etc/sysctl.conf (with irrelevant configs omitted): # net: core net.core.netdev_max_backlog = 10000 # net: ipv4 stack net.ipv4.tcp_ecn = 2 net.ipv4.tcp_sack = 1 net.ipv4.tcp_fack = 1 net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_timestamps = 1 net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_max_syn_backlog = 10000 net.ipv4.tcp_congestion_control = cubic net.ipv4.ip_local_port_range = 8000 65535 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_thin_dupack = 1 net.ipv4.tcp_thin_linear_timeouts = 1 net.netfilter.nf_conntrack_max = 99999999 net.netfilter.nf_conntrack_tcp_timeout_established = 300 Output of dmesg -d, with non-ICMP UFW messages suppressed: [508315.349295 < 19.852453>] [UFW BLOCK] IN=bond1 OUT= MAC=<mac addresses> SRC=118.xx.xx.143 DST=50.xx.xx.16 LEN=68 TOS=0x00 PREC=0x00 TTL=51 ID=43221 PROTO=ICMP TYPE=3 CODE=1 [SRC=50.xx.xx.16 DST=118.xx.xx.143 LEN=40 TOS=0x00 PREC=0x00 TTL=249 ID=10220 DF PROTO=TCP SPT=80 DPT=53817 WINDOW=8190 RES=0x00 ACK FIN URGP=0 ] [517787.732242 < 0.443127>] Peer 190.xx.xx.131:59705/80 unexpectedly shrunk window 1155488866:1155489425 (repaired) How can I go about diagnosing the cause of this problem, on a Debian-family Linux box?

    Read the article

  • PPTP connection fails with errors 800/806

    - by Mark S. Rasmussen
    I've got a client (Server 2008 R2) that won't connect to our production environment PPTP VPN server (Server 2003, running RRAS). The server is behind a firewall that has TCP1723 open as well as GRE. Other clients at our office are able to connect just fine. Our office is behind a Juniper SSG5-Serial firewall, but all outgoing traffic is allowed, and multiple other clients are able to connect to VPN servers without issues. I've also setup a completely different VPN server on another network outside of our office. The functioning clients connect just fine - the Server 2008 R2 machine doesn't. Thus it's definitely a problem with this machine in particular. I've rebooted it. I've disabled the firewall, no dice on either. I've run PPTPSRV and PPTPCLNT on the server/client and they're able to communicate perfectly - indicating there's no problem using neither TCP1723 nor GRE. The Server 2008 R2 machine is also running as a VPN server itself (incoming connection) and that's working perfectly. We have the issues no matter if there are active incoming connections or not. I'm not sure what my next debugging step would be; any suggestions? EDIT: The event log on the server has the following warning from RasMan: A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets. Obviously this points to GRE being a potential problem. But seeing as I have other clients connectiong without problems, as well as PPTPSRV and PPTPCLNT being able to communicate, I'm suspecting this might be a red herring. EDIT: Here are the anonymized events logged by the client in chronological order: CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has started dialing a VPN connection using a per-user connection profile named ZZZ. The connection settings are: Dial-in User = XXX\YYY VpnStrategy = PPTP DataEncryption = Require PrerequisiteEntry = AutoLogon = No UseRasCredentials = Yes Authentication Type = CHAP/MS-CHAPv2 Ipv4DefaultGateway = No Ipv4AddressAssignment = By Server Ipv4DNSServerAssignment = By Server Ipv6DefaultGateway = Yes Ipv6AddressAssignment = By Server Ipv6DNSServerAssignment = By Server IpDnsFlags = Register primary domain suffix IpNBTEnabled = Yes UseFlags = Private Connection ConnectOnWinlogon = No. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY is trying to establish a link to the Remote Access Server for the connection named ZZZ using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has successfully established a link to the Remote Access Server using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The link to the Remote Access Server has been established by user XXX\YYY. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY dialed a connection named ZZZ which has failed. The error code returned on failure is 806. Running Wireshark on the client shows it trying and retrying to send a "71 Configuration Request" While the server shows the incoming client requests, but apparently without replying: Given that this is GRE traffic, I think rules out the GRE traffic being blocked. Question is, why doesn't the server reply? This is the Configuration Request the server receives from the non functioning client (meaning no response is sent to the client request): And this is the Configuration Request the server receives from the working client: To me they seem identical, except for differing keys and magic numbers, and the fact that one client receives a response while the other doesn't.

    Read the article

  • Apache doesn't run multiple requests

    - by Reinderien
    I'm currently running this simple Python CGI script to test rudimentary IPC: #!/usr/bin/python -u import cgi, errno, fcntl, os, os.path, sys, time print("""Content-Type: text/html; charset=utf-8 <!doctype html> <html lang="en"> <head> <meta charset="utf-8" /> <title>IPC test</title> </head> <body> """) ftempname = '/tmp/ipc-messages' master = not os.path.exists(ftempname) if master: fmode = 'w' else: fmode = 'r' print('<p>Opening file</p>') sys.stdout.flush() ftemp = open(ftempname, fmode) print('<p>File opened</p>') if master: print('<p>Operating as master</p>') sys.stdout.flush() for i in range(10): print('<p>' + str(i) + '</p>') sys.stdout.flush() time.sleep(1) ftemp.close() os.remove(ftempname) else: print('<p>Operating as a slave</p>') ftemp.close() print(""" </body> </html>""") The 'server-push' portion works; that is, for the first request, I do see piecewise updates. However, while the first request is being serviced, subsequent requests are not started, only to be started after the first request has finished. Any ideas on why, and how to fix it? Edit: I see the same non-concurrent behaviour with vanilla PHP, running this: <!doctype html> <html lang="en"> <!-- $Id: $--> <head> <meta charset="utf-8" /> <title>IPC test</title> </head> <body> <p> <?php function echofl($str) { echo $str . "</b>\n"; ob_flush(); flush(); } define('tempfn', '/tmp/emailsync'); if (file_exists(tempfn)) $perms = 'r+'; else $perms = 'w'; assert($fsync = fopen(tempfn, $perms)); assert(chmod(tempfn, 0600)); if (!flock($fsync, LOCK_EX | LOCK_NB, $wouldblock)) { assert($wouldblock); $master = false; } else $master = true; if ($master) { echofl('Running as master.'); assert(fwrite($fsync, 'content') != false); assert(sleep(5) == 0); assert(flock($fsync, LOCK_UN)); } else { echofl('Running as slave.'); echofl(fgets($fsync)); } assert(fclose($fsync)); echofl('Done.'); ?> </p> </body> </html>

    Read the article

  • Intelligent "Subtraction" of one text logfile from another

    - by Vi
    Example: Application generates large text log file A with many different messages. It generates similarly large log file B when does not function correctly. I want to see what messages in file B are essentially new, i.e. to filter-out everything from A. Trivial prototype is: Sort | uniq both files Join files sort | uniq -c grep -v "^2" This produces symmetric difference and inconvenient. How to do it better? (including non-symmetric difference and preserving of messages order in B) Program should first analyse A and learn which messages are common, then analyse B showing with messages needs attention. Ideally it should automatically disregard things like timestamps, line numbers or other volatile things. Example. A: 0:00:00.234 Received buffer 0x324234 0:00:00.237 Processeed buffer 0x324234 0:00:00.238 Send buffer 0x324255 0:00:03.334 Received buffer 0x324255 0:00:03.337 Processeed buffer 0x324255 0:00:03.339 Send buffer 0x324255 0:00:05.171 Received buffer 0x32421A 0:00:05.173 Processeed buffer 0x32421A 0:00:05.178 Send buffer 0x32421A B: 0:00:00.134 Received buffer 0x324111 0:00:00.137 Processeed buffer 0x324111 0:00:00.138 Send buffer 0x324111 0:00:03.334 Received buffer 0x324222 0:00:03.337 Processeed buffer 0x324222 0:00:03.338 Error processing buffer 0x324222 0:00:03.339 Send buffer 0x3242222 0:00:05.271 Received buffer 0x3242FA 0:00:05.273 Processeed buffer 0x3242FA 0:00:05.278 Send buffer 0x3242FA 0:00:07.280 Send buffer 0x3242FA failed Result: 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed One of ways of solving it can be something like that: Split each line to logical units: 0:00:00.134 Received buffer 0x324111,0:00:00.134,Received,buffer,0x324111,324111,Received buffer, \d:\d\d:\d\d\.\d\d\d, \d+:\d+:\d+.\d+, 0x[0-9A-F]{6}, ... It should find individual words, simple patterns in numbers, common layouts (e.g. "some date than text than number than text than end_of_line"), also handle combinations of above. As it is not easy task, user assistance (adding regexes with explicit "disregard that","make the main factor","don't split to parts","consider as date/number","take care of order/quantity of such messages" rules) should be supported (but not required) for it. Find recurring units and "categorize" lines, filter out too volatile things like timestamps, addresses or line numbers. Analyse the second file, find things that has new logical units (one-time or recurring), or anything that will "amaze" the system which has got used to the first file. Example of doing some bit of this manually: $ cat A | head -n 1 0:00:00.234 Received buffer 0x324234 $ cat A | egrep -v "Received buffer" | head -n 1 0:00:00.237 Processeed buffer 0x324234 $ cat A | egrep -v "Received buffer|Processeed buffer" | head -n 1 0:00:00.238 Send buffer 0x324255 $ cat A | egrep -v "Received buffer|Processeed buffer|Send buffer" | head -n 1 $ cat B | egrep -v "Received buffer|Processeed buffer|Send buffer" 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed This is a boring thing (there are a lot of message types); also I can accidentally include some too broad pattern. Also it can't handle complicated things like interrelation between messages. I know that it is AI-related. May be there are already developed tools?

    Read the article

  • WSUS 3.0 SP2 installation fails at "configuring database" step.

    - by flashkube
    Attempting to install WSUS 3.0 SP2 on a Windows Server 2003 Enterprise system. I'm asking the setup to create a new database on one of our existing SQL Server 2005 systems. When the setup gets to the "configuring database" step it stops and throws "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." The two logs it suggests I look at are below. I'm not seeing any errors that mean anything to me. Any direction you can give will be greatly appreciated. WSUSSetup.log: 2009-12-04 15:26:21 Success MWUSSetup Validating pre-requisites... 2009-12-04 15:26:22 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.) 2009-12-04 15:26:28 Success MWUSSetup No SQL instances found 2009-12-04 15:26:42 Success MWUSSetup Initializing installation details 2009-12-04 15:26:42 Success MWUSSetup Installing ASP.Net 2009-12-04 15:27:24 Success MWUSSetup ASP.Net is installed successfully 2009-12-04 15:27:24 Success MWUSSetup Installing WSUS... 2009-12-04 15:27:28 Success CustomActions.Dll Unable to get INSTALL_LANGUAGE property, calculating it... 2009-12-04 15:27:28 Success CustomActions.Dll Successfully set propery of WSUS admin groups' full names 2009-12-04 15:27:29 Success CustomActions.Dll .Net framework path: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 2009-12-04 15:27:33 Success CustomActions.Dll Creating user group: WSUS Reporters with Description: WSUS Administrators who can only run reports on the Windows Server Update Services server. 2009-12-04 15:27:33 Success CustomActions.Dll Creating WSUS Reporters user group 2009-12-04 15:27:33 Success CustomActions.Dll WSUS Reporters user group already exists 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS Reporters user group 2009-12-04 15:27:33 Success CustomActions.Dll Creating user group: WSUS Administrators with Description: WSUS Administrators can administer the Windows Server Update Services server. 2009-12-04 15:27:33 Success CustomActions.Dll Creating WSUS Administrators user group 2009-12-04 15:27:33 Success CustomActions.Dll WSUS Administrators user group already exists 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS Administrators user group 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS user groups 2009-12-04 15:27:33 Success CustomActions.Dll Succesfully set binary SID property 2009-12-04 15:27:33 Success CustomActions.Dll Succesfully set binary SID property 2009-12-04 15:27:33 Success CustomActions.Dll Successfully set binary SID properties 2009-12-04 15:28:50 Error MWUSSetup InstallWsus: MWUS Installation Failed (Error 0x80070643: Fatal error during installation.) 2009-12-04 15:28:50 Error MWUSSetup CInstallDriver::PerformSetup: WSUS installation failed (Error 0x80070643: Fatal error during installation.) 2009-12-04 15:28:50 Error MWUSSetup CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.) From the end of WSUSSetupmsi_091204_1527.log MSI (s) (58:7C) [15:28:49:860]: Note: 1: 1708 MSI (s) (58:7C) [15:28:49:860]: Product: Windows Server Update Services 3.0 SP2 -- Installation failed. MSI (s) (58:7C) [15:28:49:875]: Cleaning up uninstalled install packages, if any exist MSI (s) (58:7C) [15:28:49:875]: MainEngineThread is returning 1603 MSI (s) (58:78) [15:28:49:985]: Destroying RemoteAPI object. MSI (s) (58:90) [15:28:49:985]: Custom Action Manager thread ending. === Logging stopped: 12/4/2009 15:28:49 === MSI (c) (30:54) [15:28:50:016]: Decrementing counter to disable shutdown. If counter = 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (30:54) [15:28:50:016]: MainEngineThread is returning 1603 === Verbose logging stopped: 12/4/2009 15:28:50 ===

    Read the article

  • ESXI guests not using available CPU resources

    - by Alan M
    I have a VMWare ESXI 5.0.0 (it's a bit old, I know) host with three guest VMs on it. For reasons unknown, the guests will not use much of the availble CPU resources. I have all three guests in a single pool, with the hosts all configured to use the same amount of resource shares, so they're basically 33% each. The three guests are basically identically configured as far as their VM resources go. So the problem is, even when the guests are performing what should be very 'busy' activitites, such as at bootup, the actual host CPU consumed is something tiny, like 33mhz, when seen via vSphere console's "Virtual Machines" tab when viewing properties for the pool. And of course, the performance of the guest VMs is terrible. The host has plenty of CPU to spare. I've tried tinkering with individual guest VM resource settings; cranking up the reservation, etc. No matter. The guests just refuse to make use of the abundant CPU available to them, and insist on using a sliver of the available resources. Any suggestions? Update after reading various comments below Per the suggestions below, I did remove the guests from the application pool; this didn't make any difference. I do understand that the guests are not going to consume resources they do not need. I have tried to do a remote perfmon on the guest which is experiencing long boot times, but I cannot connect to the guest remotely with perfmon (guest is w2k8r2 server). Host graphs for CPU, Mem, Disk are basically flatlining; very little demand. Same is true for the guest stats; while the guest itself seems to be crawling, the guest resource graphing shows very little activity across CPU, Mem, Disk. Host is a Dell PowerEdge 2900, has 2 physical CPU,20gb RAM. (it's a test/dev environment using surplus gear) Guest1 has: VM ver. 7, 2vCPU, 4gb RAM, 140gb storage which lives on a RAID-5 array on the host. Guest2 has: VM ver. 7, 2vCPU, 4gb RAM, 140gb storage which lives on a RAID-5 array on the host. Guest3 has: VM ver. 7, 1vCPU, 2gb RAM, 2tb storage which lives on a RAID-5 ISCSI NAS box Perhaps I am making a false assumption that if a guest has a demand for CPU (e.g. Windows Task Manager shows 100% CPU), the host would supply the guest with more CPU (mem, disk) on demand. Another Update After checking the stats, it would appear that the host is indeed not busy at all, neither is the guest. I believe I have a good idea on the issue, though; a messed-up VMWare Tools install. The guest has VMware Tools on it, but the host says it does not. VMWare Tools refuses to uninstall, refuses to be upgraded, refuses to be recognized. While I cannot say with authority, this would appear to be something worth investigation. I do not know the origin of the guest itself, nor the specifics on the original VMWare Tools install. Following various bits of googling, I did come up with a few suggestions that went nowhere. To that end, I was going to delete this question, but was prompted not to do so since so many folks answered. My suspicion right now is; the problem truly is the guest; the guest is not making a demand on the host, and as a natural result, the host is treating the guest accordingly. My Final Update I am 99% certain the guest VM had something fundamentally wrong with it re VMWare Tools. I created a clone of a different VM with a near-identical OS config, but a properly working install of VMWare tools. The guest runs just great, and takes up it's allotment of resources when it needs to; e.g. it eats up about 850mhz CPU during startup, then ticks down to idle once the guest OS is stable.

    Read the article

  • SATA drive problems with two SIL RAID cards

    - by Jon Topper
    I've just put a second SiI 3114 SATARaid card in my home server so that I could add another pair of SATA drives and increase my storage space. Annoyingly, it doesn't seem to work: [ 32.816030] ata5: lost interrupt (Status 0x0) [ 32.816072] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 32.816091] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 32.816094] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 32.816101] ata5.00: status: { DRDY } [ 32.816117] ata5: hard resetting link [ 33.136082] ata5: SATA link down (SStatus 0 SControl 0) [ 36.060940] irq 18: nobody cared (try booting with the "irqpoll" option) [ 36.060949] Pid: 0, comm: swapper Not tainted 2.6.31-20-generic #58-Ubuntu [ 36.060954] Call Trace: [ 36.060977] [] ? printk+0x18/0x1c [ 36.060997] [] __report_bad_irq+0x27/0x90 [ 36.061005] [] note_interrupt+0x150/0x190 [ 36.061011] [] handle_fasteoi_irq+0xac/0xd0 [ 36.061023] [] handle_irq+0x18/0x30 [ 36.061029] [] do_IRQ+0x47/0xc0 [ 36.061042] [] ? irq_exit+0x50/0x70 [ 36.061058] [] ? smp_apic_timer_interrupt+0x57/0x90 [ 36.061065] [] common_interrupt+0x30/0x40 [ 36.061075] [] ? native_safe_halt+0x5/0x10 [ 36.061082] [] default_idle+0x46/0xd0 [ 36.061088] [] cpu_idle+0x8c/0xd0 [ 36.061103] [] rest_init+0x55/0x60 [ 36.061111] [] start_kernel+0x2e6/0x2ec [ 36.061117] [] ? unknown_bootoption+0x0/0x19e [ 36.061133] [] i386_start_kernel+0x7c/0x83 [ 36.061137] handlers: [ 36.061139] [] (sil_interrupt+0x0/0xb0) [ 36.061151] Disabling IRQ #18 [ 38.136014] ata5: hard resetting link [ 38.456022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.456013] ata5: hard resetting link [ 43.776022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.776035] ata5.00: disabled [ 43.776055] ata5.00: device reported invalid CHS sector 0 [ 43.776074] sd 4:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 43.776082] sd 4:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor] [ 43.776092] Descriptor sense data with sense descriptors (in hex): [ 43.776097] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 43.776112] 00 00 00 00 [ 43.776118] sd 4:0:0:0: [sde] Add. Sense: No additional sense information [ 43.776127] end_request: I/O error, dev sde, sector 0 [ 43.776136] Buffer I/O error on device sde, logical block 0 [ 43.776170] ata5: EH complete [ 43.776187] ata5.00: detaching (SCSI 4:0:0:0) root@core:~# cat /proc/interrupts CPU0 0: 47 IO-APIC-edge timer 1: 8 IO-APIC-edge i8042 6: 3 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 14: 53069 IO-APIC-edge pata_sis 15: 53004 IO-APIC-edge pata_sis 17: 112265 IO-APIC-fasteoi sata_sil 18: 200002 IO-APIC-fasteoi sata_sil, SiS SI7012 19: 111140 IO-APIC-fasteoi eth0 20: 0 IO-APIC-fasteoi ohci_hcd:usb2 21: 0 IO-APIC-fasteoi ohci_hcd:usb3 23: 0 IO-APIC-fasteoi ehci_hcd:usb1 NMI: 0 Non-maskable interrupts LOC: 6650492 Local timer interrupts SPU: 0 Spurious interrupts CNT: 0 Performance counter interrupts PND: 0 Performance pending work RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 160 Machine check polls ERR: 0 MIS: 0 root@core:~# lspci | grep Raid 00:09.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 00:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) root@core:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 9.10 Release: 9.10 Codename: karmic root@core:~# uname -a Linux core.topper.me.uk 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux I've tried a combination of different kernel options (irqpoll, noapic, noacpi, pci=noapic) all to no avail. Does anyone have any bright ideas about how I can go about making this work? Swapping PCI cards around isn't an option as there are only two slots in this motherboard (an ASRock K7S41GX). The BIOS doesn't look to have too much in the way of configuration options regarding IRQ usage. Plan B is to ditch this server completely and buy a new QNAP for these drives to go in, but I was hoping to avoid doing this right now.

    Read the article

  • Network Restructure Method for Double-NAT network

    - by Adrian
    Due to a series of poor network design decisions (mostly) made many years ago in order to save a few bucks here and there, I have a network that is decidedly sub-optimally architected. I'm looking for suggestions to improve this less-than-pleasant situation. We're a non-profit with a Linux-based IT department and a limited budget. (Note: None of the Windows equipment we have runs does anything that talks to the Internet nor do we have any Windows admins on staff.) Key points: We have a main office and about 12 remote sites that essentially double NAT their subnets with physically-segregated switches. (No VLANing and limited ability to do so with current switches) These locations have a "DMZ" subnet that are NAT'd on an identically assigned 10.0.0/24 subnet at each site. These subnets cannot talk to DMZs at any other location because we don't route them anywhere except between server and adjacent "firewall". Some of these locations have multiple ISP connections (T1, Cable, and/or DSLs) that we manually route using IP Tools in Linux. These firewalls all run on the (10.0.0/24) network and are mostly "pro-sumer" grade firewalls (Linksys, Netgear, etc.) or ISP-provided DSL modems. Connecting these firewalls (via simple unmanaged switches) is one or more servers that must be publically-accessible. Connected to the main office's 10.0.0/24 subnet are servers for email, tele-commuter VPN, remote office VPN server, primary router to the internal 192.168/24 subnets. These have to be access from specific ISP connections based on traffic type and connection source. All our routing is done manually or with OpenVPN route statements Inter-office traffic goes through the OpenVPN service in the main 'Router' server which has it's own NAT'ing involved. Remote sites only have one server installed at each site and cannot afford multiple servers due to budget constraints. These servers are all LTSP servers several 5-20 terminals. The 192.168.2/24 and 192.168.3/24 subnets are mostly but NOT entirely on Cisco 2960 switches that can do VLAN. The remainder are DLink DGS-1248 switches that I am not sure I trust well enough to use with VLANs. There is also some remaining internal concern about VLANs since only the senior networking staff person understands how it works. All regular internet traffic goes through the CentOS 5 router server which in turns NATs the 192.168/24 subnets to the 10.0.0.0/24 subnets according to the manually-configured routing rules that we use to point outbound traffic to the proper internet connection based on '-host' routing statements. I want to simplify this and ready All Of The Things for ESXi virtualization, including these public-facing services. Is there a no- or low-cost solution that would get rid of the Double-NAT and restore a little sanity to this mess so that my future replacement doesn't hunt me down? Basic Diagram for the main office: These are my goals: Public-facing Servers with interfaces on that middle 10.0.0/24 network to be moved in to 192.168.2/24 subnet on ESXi servers. Get rid of the double NAT and get our entire network on one single subnet. My understanding is that this is something we'll need to do under IPv6 anyway, but I think this mess is standing in the way.

    Read the article

  • Troubleshooting inconsistent ODBC connectivity

    - by Chris
    I'm attempting to integrate UPS WorldShip with a SQL Server 2008 R2 database but the connection is very inconsistent. UPS claims this is a DSN/Windows problem and I have not been able to convince them otherwise. The integration is quite simple: my shipping guy clicks a button which opens a form where he enters an order #. After pressing enter the shipping information will be pulled from the database for that order #. The problem is that WorldShip often times thinks the DSN does not exist. However, I am able to open WorldShip's customization tool and browse all the tables and fields in the database my DSN is connected to which means at the very least my DSN does, in fact, exist. The reason this has been so difficult to troubleshoot is because there is no consistency to the problem and I'm not able to reliably repeat any behavior. That is to say that rebooting the PC doesn't cause the connection to break and opening the integration tool and viewing the tables and fields doesn't cause the integration button to work. Is there some way for me to monitor this connection from the SQL server or get any clues as to why it fails? As requested by TallTed here is a sample of the trace file I created. After a mere 5 hours the trace file was over 130MB so there's no way I could provide it in its entirety. WorldShipTD d94-690 EXIT SQLSetStmtAttrW with return code -1 (SQL_ERROR) SQLHSTMT 0x0C6632A0 SQLINTEGER 1227 <unknown> SQLPOINTER [Unknown attribute 1227] SQLINTEGER -5 DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0) WorldShipTD d94-690 ENTER SQLAllocHandle SQLSMALLINT 3 <SQL_HANDLE_STMT> SQLHANDLE 0x0C662FC0 SQLHANDLE * 0x03EBCE38 WorldShipTD d94-690 EXIT SQLAllocHandle with return code 0 (SQL_SUCCESS) SQLSMALLINT 3 <SQL_HANDLE_STMT> SQLHANDLE 0x0C662FC0 SQLHANDLE * 0x03EBCE38 ( 0x0C6632A0) WorldShipTD d94-690 ENTER SQLSetStmtAttrW SQLHSTMT 0x0C6632A0 SQLINTEGER 0 <SQL_ATTR_QUERY_TIMEOUT> SQLPOINTER 30 SQLINTEGER -5 WorldShipTD d94-690 EXIT SQLSetStmtAttrW with return code -1 (SQL_ERROR) SQLHSTMT 0x0C6632A0 SQLINTEGER 0 <SQL_ATTR_QUERY_TIMEOUT> SQLPOINTER 30 SQLINTEGER -5 DIAG [HYC00] [Microsoft][ODBC Microsoft Access Driver]Optional feature not implemented (106) WorldShipTD d94-690 ENTER SQLGetDiagFieldW SQLSMALLINT 3 SQLHANDLE 0x0C6632A0 SQLSMALLINT 1 SQLSMALLINT 4 SQLPOINTER 0x00520708 SQLSMALLINT 12 SQLSMALLINT * 0x0028E2A8 WorldShipTD d94-690 EXIT SQLGetDiagFieldW with return code 0 (SQL_SUCCESS) SQLSMALLINT 3 SQLHANDLE 0x0C6632A0 SQLSMALLINT 1 SQLSMALLINT 4 SQLPOINTER 0x00520708 SQLSMALLINT 12 SQLSMALLINT * 0x0028E2A8 (10) WorldShipTD d94-690 ENTER SQLGetInfoW HDBC 0x0C662FC0 UWORD 77 <SQL_DRIVER_ODBC_VER> PTR 0x03EBCEDC SWORD 100 SWORD * 0x0028E290 WorldShipTD d94-690 EXIT SQLGetInfoW with return code 0 (SQL_SUCCESS) HDBC 0x0C662FC0 UWORD 77 <SQL_DRIVER_ODBC_VER> PTR 0x03EBCEDC [ 10] "03.51" SWORD 100 SWORD * 0x0028E290 (10) WorldShipTD d94-690 ENTER SQLSetStmtAttrW SQLHSTMT 0x0C6632A0 SQLINTEGER 1228 <unknown> SQLPOINTER [Unknown attribute 1228] SQLINTEGER -5 WorldShipTD d94-690 EXIT SQLSetStmtAttrW with return code -1 (SQL_ERROR) SQLHSTMT 0x0C6632A0 SQLINTEGER 1228 <unknown> SQLPOINTER [Unknown attribute 1228] SQLINTEGER -5 DIAG [HY092] [Microsoft][ODBC Microsoft Access Driver]Invalid attribute/option identifier (86) WorldShipTD d94-690 ENTER SQLGetDiagFieldW SQLSMALLINT 3 SQLHANDLE 0x0C6632A0 SQLSMALLINT 1 SQLSMALLINT 4 SQLPOINTER 0x00520708 SQLSMALLINT 12 SQLSMALLINT * 0x0028E2A8 WorldShipTD d94-690 EXIT SQLGetDiagFieldW with return code 0 (SQL_SUCCESS) SQLSMALLINT 3 SQLHANDLE 0x0C6632A0 SQLSMALLINT 1 SQLSMALLINT 4 SQLPOINTER 0x00520708 SQLSMALLINT 12 SQLSMALLINT * 0x0028E2A8 (10) WorldShipTD d94-690 ENTER SQLSetStmtAttrW SQLHSTMT 0x0C6632A0 SQLINTEGER 1227 <unknown> SQLPOINTER [Unknown attribute 1227] SQLINTEGER -5 WorldShipTD d94-690 EXIT SQLSetStmtAttrW with return code -1 (SQL_ERROR) SQLHSTMT 0x0C6632A0 SQLINTEGER 1227 <unknown> SQLPOINTER [Unknown attribute 1227] SQLINTEGER -5 DIAG [HY092] [Microsoft][ODBC Microsoft Access Driver]Invalid attribute/option identifier (86) WorldShipTD d94-690 ENTER SQLGetDiagFieldW SQLSMALLINT 3 SQLHANDLE 0x0C6632A0 SQLSMALLINT 1 SQLSMALLINT 4 SQLPOINTER 0x00520708 SQLSMALLINT 12 SQLSMALLINT * 0x0028E2A8 WorldShipTD d94-690 EXIT SQLGetDiagFieldW with return code 0 (SQL_SUCCESS) SQLSMALLINT 3 SQLHANDLE 0x0C6632A0 SQLSMALLINT 1 SQLSMALLINT 4 SQLPOINTER 0x00520708 SQLSMALLINT 12 SQLSMALLINT * 0x0028E2A8 (10)

    Read the article

  • How can I tell Firefox to ignore unprintable characters?

    - by BrianH
    Edit: Summary Apparently the intended character to display in this case is an "en-dash". This page has a table half way down that shows that for the &ndash;, some software will convert the correct hex code of 2013 to 0096. (look at the first row in the table). This answer on Stackoverflow explains that somehow this is a mixup between Windows-1252 and UTF-8 This blog article enforces this: Character 150 (0x96) is the unicode character "START OF GUARDED AREA" in the non-displayed C1 control character range, but in the Windows-1252 encoding it's mapped to to the displayable character 0x2013 "en-dash" (a short dash). Others have struggled with this when producing content, as this answer on Stackoverflow shows how to replace 0x0096 with 0x2013. Google must realize this, because as stated in my original question below, Google's cached version of the Amazon page has &ndash; so it seems they are automatically correcting these mistakes on pages they cache. I have tried setting my encoding to Windows-1252 but that does not help. So now I guess my question is, how can I tell Firefox to ignore unprintable characters like these? Original content below: (Firefox 3.6.13 on Windows XP) Every once in a while I notice an odd character on certain web pages when browsing the web. It is a outline of a box with a 4-digit number inside. And example of a page that has these characters is: http://aws.amazon.com/ec2/#highlights After each section heading (Elastic, Completely Controlled, ...) I see a box with the number "0096" inside. I looked at the cached version on Google, and google has &ndash; in it's place, so I'm guessing I should be seeing a dash there instead of the box with the numbers in it. I have tried changing the character encoding in Firefox but haven't been able to find one that shows these characters correctly. Is there a way to allow Firefox to view these characters? Thanks in advance! Edit - adding a screen shot of the "special" characters: Edit #2 - tried in Ubuntu - new screenshots I logged into my Ubuntu desktop and browsed to the amazon page in Chrome and Firefox. Chrome completely ignores character, even if I inspect or view page source. Firefox in Unbutu displays the character exactly like Firefox on my Windows XP box. I copied the character and played around with it at the command line - here is a screenshot of the results: It looks like I can paste the character into this post as well: `` It is definitely not isolated to Windows XP. I tried setting the character encoding for my terminal to Windows 1252 (from Dennis' comment below), but then it just displays this character as a question mark. I pulled the webpage down with wget and with curl, and both outputs show this characters as: <96> It makes me wonder if this character renders correctly for anyone? It appears webkit just ignores it, my IE6 ignores it, Firefox displays the box with the numbers in it. I would have to imagine the design team at Amazon can see it correctly? It's not a huge deal to get these characters displaying correctly, but it would be nice to know if there is a solution to this.

    Read the article

  • Understanding NFS4 (Linux server)

    - by drumfire
    I've been a bit bothered by NFS4 on Linux. Some information 'out there' seems to conflict with other information, and other information appears hard to find. So here are a couple of things that caught my attention, hopefully someone out there can shed some light on this. This question focuses exclusively on NFS4 without Kerberos etc. 1. Exports There is ambiguous information in the exports manpage on the structure of /etc/exports. To quote from exports(5): Also, each line may have one or more specifications for default options after the path name, in the form of a dash ("-") followed by an option list. The option list is used for all subsequent exports on that line only. What does "subsequent exports on that line only" mean? 1.2 fsid=0 not required anymore? I was searching for fsid when I found a comment on the linux-nfs list stating fsid=0 is not required anymore. Now I'm just confused, do I need it with nfs4 or not?! 2. Non-exported directory still mountable Say I have the following tree: /exp /exp/users /exp/distr /exp/distr/archlinux /exp/distr/debian And I have the following entries in this fstab entry: /dev/disk/by-label/users /mnt/users ext4 defaults 0 0 /dev/disk/by-label/distr /mnt/distr ext4 defaults 0 0 /mnt/users /exp/users none bind 0 0 /mnt/distr /exp/distr none bind 0 0 And my exports is exactly this: /exp 192.168.1.0/24(fsid=0,rw,async,no_subtree_check,no_root_squash) /exp/distr 192.168.1.0/24(rw,async,no_subtree_check,no_root_squash) And exportfs -arv shows: exporting 192.168.1.0/24:/exp/distr exporting 192.168.1.0/24:/exp Then why am I able to do this and get no error on a client: mount -t nfs4 server:/exp/users /tmp/test Even though /exp/users is not exported? I didn't export this directory, and while I don't see the contents of /dev/disk/by-label/users unless I specify crossmnt, I am still able to write to the directory. Everything I write to there goes to the underlying directory of /exp/users which can be seen when I umount /exp/users; ls /exp/users.. 3. The odd case of showmount -d server As stated by rpc.mountd(8), this command should display directories that are either currently mounted by clients, or stale entries in /var/lib/nfs/rmtab, as can be read: The rpc.mountd daemon registers every successful MNT request by adding an entry to the /var/lib/nfs/rmtab file. When receivng a UMNT request from an NFS client, rpc.mountd simply removes the matching entry from /var/lib/nfs/rmtab, as long as the access control list for that export allows that sender to access the export. (...) Note, however, that there is little to guarantee that the contents of /var/lib/nfs/rmtab are accurate. A client may continue accessing an export even after invoking UMNT. If the client reboots without sending a UMNT request, stale entries remain for that client in /var/lib/nfs/rmtab. After reading this I surely wonder: Isn't it terribly insecure to just expose this type of client information; Aren't unaware server admins bound to have an rmtab with a lot of stale clients; Is this the reason that clients that mount nfs4 directories with mount -v get to see output like "nothing was mounted" even though something was mounted? I have a lot of other questions regarding nfs4, but I'll keep it at this for the moment.. :)

    Read the article

  • How to export computers from Active Directory to XML using Powershell?

    - by CoDeRs
    I am trying to create a powershell scripts for Remote Desktop Connection Manager using the active directory module. My first thought was get a list of computers in AD and parse them out into XML format similar to the OU structure that is in AD. I have no problem with that, the below code will work just but not how I wanted. EG # here is a the array $OUs Americas/Canada/Canada Computers/Desktops Americas/Canada/Canada Computers/Laptops Americas/Canada/Canada Computers/Virtual Computers Americas/USA/USA Computers/Laptops Computers Disabled Accounts Domain Controllers EMEA/UK/UK Computers/Desktops EMEA/UK/UK Computers/Laptops Outside Sales and Service/Laptops Servers I wanted to have the basic XML structured like this Americas Canada Canada Computers Desktops Laptops Virtual Computers USA USA Computers Laptops Computers Disabled Accounts Domain Controllers EMEA UK UK Computers Desktops Laptops Outside Sales and Service Laptops Servers However if you run the below it does not nest the next string in the array it only restarts the from the beginning and duplicating Americas Canada Canada Computers Desktops Americas Canada Canada Computers Laptops Americas Canada Canada Computers Virtual Computers Americas USA USA Computers Laptops RDCMGenerator.ps1 #Importing Microsoft`s PowerShell-module for administering ActiveDirectory Import-Module ActiveDirectory #Initial variables $OUs = @() $RDCMVer = "2.2" $userName = "domain\username" $password = "Hashed Password+" $Path = "$env:temp\test.xml" $allComputers = Get-ADComputer -LDAPFilter "(OperatingSystem=*)" -Properties Name,Description,CanonicalName | Sort-Object CanonicalName | select Name,Description,CanonicalName $allOUObjects = $allComputers | Foreach {"$($_.CanonicalName)"} Function Initialize-XML{ ##<RDCMan schemaVersion="1"> $xmlWriter.WriteStartElement('RDCMan') $XmlWriter.WriteAttributeString('schemaVersion', '1') $xmlWriter.WriteElementString('version',$RDCMVer) $xmlWriter.WriteStartElement('file') $xmlWriter.WriteStartElement('properties') $xmlWriter.WriteElementString('name',$env:userdomain) $xmlWriter.WriteElementString('expanded','true') $xmlWriter.WriteElementString('comment','') $xmlWriter.WriteStartElement('logonCredentials') $XmlWriter.WriteAttributeString('inherit', 'None') $xmlWriter.WriteElementString('userName',$userName) $xmlWriter.WriteElementString('domain',$env:userdomain) $xmlWriter.WriteStartElement('password') $XmlWriter.WriteAttributeString('storeAsClearText', 'false') $XmlWriter.WriteRaw($password) $xmlWriter.WriteEndElement() $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('connectionSettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('gatewaySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('remoteDesktop') $XmlWriter.WriteAttributeString('inherit', 'None') $xmlWriter.WriteElementString('size','1024 x 768') $xmlWriter.WriteElementString('sameSizeAsClientArea','True') $xmlWriter.WriteElementString('fullScreen','False') $xmlWriter.WriteElementString('colorDepth','32') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('localResources') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('securitySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('displaySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteEndElement() } Function Create-Group ($groupName){ #Start Group $xmlWriter.WriteStartElement('properties') $xmlWriter.WriteElementString('name',$groupName) $xmlWriter.WriteElementString('expanded','true') $xmlWriter.WriteElementString('comment','') $xmlWriter.WriteStartElement('logonCredentials') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('connectionSettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('gatewaySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('remoteDesktop') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('localResources') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('securitySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('displaySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteEndElement() } Function Create-Server ($computerName, $computerDescription) { #Start Server $xmlWriter.WriteStartElement('server') $xmlWriter.WriteElementString('name',$computerName) $xmlWriter.WriteElementString('displayName',$computerDescription) $xmlWriter.WriteElementString('comment','') $xmlWriter.WriteStartElement('logonCredentials') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('connectionSettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('gatewaySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('remoteDesktop') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('localResources') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('securitySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteStartElement('displaySettings') $XmlWriter.WriteAttributeString('inherit', 'FromParent') $xmlWriter.WriteEndElement() $xmlWriter.WriteEndElement() #Stop Server } Function Close-XML { $xmlWriter.WriteEndElement() $xmlWriter.WriteEndElement() # finalize the document: $xmlWriter.Flush() $xmlWriter.Close() notepad $path } #Strip out Domain and Computer Name from CanonicalName foreach($OU in $allOUObjects){ $newSplit = $OU.split("/") $rebildOU = "" for($i=1; $i -le ($newSplit.count - 2); $i++){ $rebildOU += $newSplit[$i] + "/" } $OUs += $rebildOU.substring(0,($rebildOU.length - 1)) } #Remove Duplicate OU's $OUs = $OUs | select -uniq #$OUs # get an XMLTextWriter to create the XML $XmlWriter = New-Object System.XMl.XmlTextWriter($Path,$UTF8) # choose a pretty formatting: $xmlWriter.Formatting = 'Indented' $xmlWriter.Indentation = 1 $XmlWriter.IndentChar = "`t" # write the header $xmlWriter.WriteStartDocument() # # 'encoding', 'utf-8' How? # # set XSL statements #Initialize Pre-Defined XML Initialize-XML ######################################################### # Start Loop for each OU-Path that has a computer in it ######################################################### foreach ($OU in $OUs){ $totalGroupName = "" #Create / Reset Total OU-Path Completed $OU.split("/") | foreach { #Split the OU-Path into individual OU's $groupName = "$_" #Current OU $totalGroupName += $groupName + "/" #Total OU-Path Completed $xmlWriter.WriteStartElement('group') #Start new XML Group Create-Group $groupName #Call function to create XML Group ################################################ # Start Loop for each Computer in $allComputers ################################################ foreach($computer in $allComputers){ $computerOU = $computer.CanonicalName #Set the computers OU-Path $OUSplit = $computerOU.split("/") #Create the Split for the OU-Path $rebiltOU = "" #Create / Reset the stripped OU-Path for($i=1; $i -le ($OUSplit.count - 2); $i++){ #Start Loop for OU-Path to strip out the Domain and Computer Name $rebiltOU += $OUSplit[$i] + "/" #Rebuild the stripped OU-Path } if ($rebiltOU -eq $totalGroupName){ #Compare the Current OU-Path with the computers stripped OU-Path $computerName = $computer.Name #Set the computer name $computerDescription = $computerName + " - " + $computer.Description #Set the computer Description Create-Server $computerName $computerDescription #Call function to create XML Server } } } ################################################### # Start Loop to close out XML Groups created above ################################################### $totalGroupName.split("/") | foreach { #Split the if ($_ -ne "" ){ $xmlWriter.WriteEndElement() #End Group } } } Close-XML

    Read the article

  • nikto probe warning messages

    - by julio
    Hi-- I have a pretty standard VPS running Ubuntu 8.1, Apache 2.2, PHP 5 etc. -- standard Lamp stack. I am using suhosin and have tried my best to plug the obvious stuff, since I'm the only user-- there's no SSH access except via pubkey on a non-standard port, there's no root access by SSH, no FTP server running, iptables is set to discard anything outside of basically port 80 or my SSH port (there's no mail server or anything else). However, I've still been compromised (not badly as far as I can tell) probably by a SQL injection. I've locked down the SQL user (there's only one outside of root, and he's got limited priv, no file etc.) So I ran nikto to see what I'm doing wrong, and there's a list of things I've never seen, and can't find using "find" or any other method I'm aware of. See below: + /autologon.html?10514: Remotely Anywhere 5.10.415 is vulnerable to XSS attacks that can lead to cookie theft or privilege escalation. This is typically found on port 2000. + /servlet/webacc?User.html=noexist: Netware web access may reveal full path of the web server. Apply vendor patch or upgrade. + OSVDB-35878: /modules.php?name=Members_List&letter='%20OR%20pass%20LIKE%20'a%25'/*: PHP Nuke module allows user names and passwords to be viewed. + OSVDB-3092: /sitemap.xml: This gives a nice listing of the site content. + OSVDB-12184: /index.php?=PHPB8B5F2A0-3C92-11d3-A3A9-4C7B08C10000: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F36-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F34-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F35-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-3092: /administrator/: This might be interesting... + OSVDB-3092: /Agent/: This might be interesting... + OSVDB-3092: /includes/: This might be interesting... + OSVDB-3092: /logs/: This might be interesting... + OSVDB-3092: /tmp/: This might be interesting... + ERROR: /servlet/Counter returned an error: error reading HTTP response + OSVDB-3268: /icons/: Directory indexing is enabled: /icons + OSVDB-3268: /images/: Directory indexing is enabled: /images + OSVDB-3299: /forumscalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /forumzcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /htforumcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbulletincalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-6659: /kCKAowoWuZkKCUPH7Mr675ILd9hFg1lnyc1tWUuEbkYkFCpCdEnCKkkd9L0bY34tIf9l6t2owkUp9nI5PIDmQzMokDbp71QFTZGxdnZhTUIzxVrQhVgwmPYsMK7g34DURzeiy3nyd4ezX5NtUozTGqMkxDrLheQmx4dDYlRx0vKaX41JX40GEMf21TKWxHAZSUxjgXUnIlKav58GZQ5LNAwSAn13l0w<font%20size=50>DEFACED<!--//--: MyWebServer 1.0.2 is vulnerable to HTML injection. Upgrade to a later version. I understand about the trace and index, but what about the vbulletin and autologin? I've searched, and I can't find any files like that on the server. I have no idea about the "MyWebServer" stuff, the PHP Nuke, or the Netware/servlet stuff-- there's nothing really on the server except a pretty standard Joomla site (updated to the latest version). Any help with these messages and/or what I'm doing wrong is very much appreciated.

    Read the article

  • What was scientifically shown to support productivity when organizing/accessing file and folders?

    - by Tom Wijsman
    I have gathered terabytes of data but it has became a habit to store files and folders to the same folder, that folder could be kind of seen as a Inbox where most files (non-installations) enter my system. This way I end up with a big collections of files that are hard to organize properly, I mostly end up making folders that match their file type but then I still have several gigabytes of data per folder which doesn't make it efficient such that I can productively use the folder. I'd rather do a few clicks than having to search through the files, whether that's by some software product or by looking through the folder. Often the file names themselves are not proper so it would be easier to recognize them if there were few in a folder, rather than thousands of them. Scaling in the structure of directory trees in a computer cluster summarizes this problem as following: The processes of storing and retrieving information are rapidly gaining importance in science as well as society as a whole [1, 2, 3, 4]. A considerable effort is being undertaken, firstly to characterize and describe how publicly available information, for example in the world wide web, is actually organized, and secondly, to design efficient methods to access this information. [1] R. M. Shiffrin and K. B¨orner, Proc. Natl. Acad. Sci. USA 101, 5183 (2004). [2] S. Lawrence, C.L. Giles, Nature 400, 107–109 (1999). [3] R.F.I. Cancho and R.V. Sol, Proc. R. Soc. London, Ser. B 268, 2261 (2001). [4] M. Sigman and G. A. Cecchi, Proc. Natl. Acad. Sci. USA 99, 1742 (2002). It goes further on explaining how the data is usually organized by taking general looks at it, but by looking at the abstract and conclusion it doesn't come with a conclusion or approach which results in a productive organization of a directory hierarchy. So, in essence, this is a problem for which I haven't found a solution yet; and I would love to see a scientific solution to this problem. Upon searching further, I don't seem to find anything useful or free papers that approach this problem so it might be that I'm looking in the wrong place. I've also noted that there are different ways to term this problem, which leads out to different results of papers. Perhaps a paper is out there, but I'm not just using the same terms as that paper uses? They often use more scientific terms. I've once heard a story about an advocate with a laptop which has simply outperformed an advocate with had tons of papers, which shows how proper organization leads to productivity; but that story didn't share details on how the advocate used the laptop or how he had organized his data. But in any case, it was way more useful than how most of us organize our data these days... Advice me how I should organize my data, I'm not looking for suggestions here. I would love to see statistics or scientific measurement approaches that help me confirm that it does help me reach my goal.

    Read the article

  • Why is IIS Anonymous authentication being used with administrative UNC drive access?

    - by Mark Lindell
    My account is local administrator on my machine. If I try to browse to a non-existent drive letter on my own box using a UNC path name: \mymachine\x$ my account would get locked out. I would also get the following warning (Event ID 100, Type “Warning”) 5 times under the “System” group in Event Viewer on my box: The server was unable to logon the Windows NT account 'ourdomain\myaccount' due to the following error: Logon failure: unknown user name or bad password. I would also get the following warning 3 times: The server was unable to logon the Windows NT account 'ourdomain\myaccount' due to the following error: The referenced account is currently locked out and may not be logged on to. On the domain controller, Event ID 680 of type “Failure Audit” would appear 4 times under the “Security” group in Event Viewer: Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: myaccount Followed by Event ID 644: User Account Locked Out: Target Account Name: myaccount Target Account ID: OURDOMAIN\myaccount Caller Machine Name: MYMACHINE Caller User Name: STAN$ Caller Domain: OURDOMAIN Caller Logon ID: (0x0,0x3E7) Followed by another 4 errors having Event ID 680. Strangely, every time I tried to browse to the UNC path I would be prompted for a user name and password, the above errors would be written to the log, and my account would be locked out. When I hit “Cancel” in response to the user name/password prompt, the following message box would display: Windows cannot find \mymachine\x$. Check the spelling and try again, or try searching for the item by clicking the Start button and then clicking Search. I checked with others in the group using XP and they only got the above message box when browsing to a “bad” drive letter on their box. No one else was prompted for a user name/password and then locked out. So, every time I tried to browse to the “bad” drive letter, behind the scenes XP was trying to login 8 times using bad credentials (or, at least a bad password as the login was correct), causing my account to get locked out on the 4th try. Interestingly, If I tried browsing to a “good” drive such as “c$” it would work fine. As a test, I tried logging on to my box as a different login and browsing the “bad” UNC path. Strangely, my “ourdomain\myaccount” account was getting locked out – not the one I was logged in as! I was totally confused as to why the credentials for the other login were being passed. After much Googling, I found a link referring to some IIS settings I was vaguely familiar with from the past but could not see how they would affect this issue. It was related to the IIS directory security setting “Anonymous access and authentication control” located under: Control Panel/Administrative Tools/Computer Management/Services and Applications/Internet Information Services/Web Sites/Default Web Site/Properties/Directory Security/Anonymous access and authentication control/Edit/Password I found no indication while scouring the Internet that this property was related to my UNC problem. But, I did notice that this property was set to my domain user name and password. And, my password did age recently but I had not reset the password accordingly for this property. Sure enough, keying in the new password corrected the problem. I was no longer prompted for a user name/password when browsing the UNC path and the account lock-outs ceased. Now, a couple of questions: Why would an IIS setting affect the browsing of a UNC path on a local box? Why had I not encountered this problem before? My password has aged several times and I’ve never encountered this problem. And, I can’t remember the last time I updated the “Anonymous access” IIS password it’s been so long. I’ve run the script after a password reset before and never had my account locked-out due to the UNC problem (the script accesses UNC paths as a normal part of its processing). Windows Update did install “Cumulative Security Update for Internet Explorer 7 for Windows XP (KB972260)” on my box on 7/29/2009. I wonder if this is responsible.

    Read the article

  • UFW as an active service on Ubuntu

    - by lamcro
    Every time I restart my computer, and check the status of the UFW firewall (sudo ufw status), it is disabled, even if I then enable and restart it. I tried putting sudo ufw enable as one of the startup applications but it asks for the sudo password every time I log on, and I'm guessing it does not protect anyone else who logs on my computer. How can I setup ufw so it is activated when I turn on my computer, and protects all accounts? Update I just tried /etc/init.d/ufw start, and it activated the firewall. Then I restarted the computer, and again it was disabled. content of /etc/ufw/ufw.conf # /etc/ufw/ufw.conf # # set to yes to start on boot ENABLED=yes # set to one of 'off', 'low', 'medium', 'high' LOGLEVEL=full content of /etc/default/ufw # /etc/default/ufw # # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback # accepted). You will need to 'disable' and then 'enable' the firewall for # the changes to take affect. IPV6=no # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW inbound packets on the INPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_INPUT_POLICY="DROP" # Set the default output policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW outbound packets on the OUTPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_OUTPUT_POLICY="ACCEPT" # Set the default forward policy to ACCEPT, DROP or REJECT. Please note that # if you change this you will most likely want to adjust your rules DEFAULT_FORWARD_POLICY="DROP" # Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please # note that setting this to ACCEPT may be a security risk. See 'man ufw' for # details DEFAULT_APPLICATION_POLICY="SKIP" # By default, ufw only touches its own chains. Set this to 'yes' to have ufw # manage the built-in chains too. Warning: setting this to 'yes' will break # non-ufw managed firewall rules MANAGE_BUILTINS=no # # IPT backend # # only enable if using iptables backend IPT_SYSCTL=/etc/ufw/sysctl.conf # extra connection tracking modules to load IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_irc nf_nat_irc" Update Followed your advise and ran update-rc.d with no luck. lester@mcgrath-pc:~$ sudo update-rc.d ufw defaults update-rc.d: warning: /etc/init.d/ufw missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/ufw ... /etc/rc0.d/K20ufw -> ../init.d/ufw /etc/rc1.d/K20ufw -> ../init.d/ufw /etc/rc6.d/K20ufw -> ../init.d/ufw /etc/rc2.d/S20ufw -> ../init.d/ufw /etc/rc3.d/S20ufw -> ../init.d/ufw /etc/rc4.d/S20ufw -> ../init.d/ufw /etc/rc5.d/S20ufw -> ../init.d/ufw lester@mcgrath-pc:~$ ls -l /etc/rc?.d/*ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc0.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc1.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc2.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc3.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc4.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc5.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc6.d/K20ufw -> ../init.d/ufw

    Read the article

  • How to prevent delays associated with IPv6 AAAA records?

    - by Nic
    Our Windows servers are registering IPv6 AAAA records with our Windows DNS servers. However, we don't have IPv6 routing enabled on our network, so this frequently causes stall behaviours. Microsoft RDP is the worst offender. When connecting to a server that has a AAAA record in DNS, the remote desktop client will try IPv6 first, and won't fall back to IPv4 until the connection times out. Power users can work around this by connecting to the IP address directly. Resolving the IPv4 address with ping -4 hostname.foo always works instantly. What can I do to avoid this delay? Disable IPv6 on client? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Too many clients to ensure this is set everywhere consistently. Will cause more problems later when we finally implement IPv6. Disable IPv6 on the server? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Requires an inconvenient registry hack to disable the entire IPv6 stack. Ensuring this is correctly set on all servers is inconvenient. Will cause more problems later when we finally implement IPv6. Mask IPv6 records on the user-facnig DNS recursor? Nope, we're using NLNet Unbound and it doesn't support that. Prevent registration of IPv6 AAAA records on the Microsoft DNS server? I don't think that's even possible. At this point, I'm considering writing a script that purges all AAAA records from our DNS zones. Please, help me find a better way. UPDATE: DNS resolution is not the problem. As @joeqwerty points out in his answer, the DNS records are returned instantly. Both A and AAAA records are immediately available. The problem is that some clients (mstsc.exe) will preferentially attempt a connection over IPv6, and take a while to fall back to IPv4. This seems like a routing problem. The ping command produces a "General failure" error message because the destination address is unroutable. C:\Windows\system32>ping myhost.mydomain Pinging myhost.mydomain [2002:1234:1234::1234:1234] with 32 bytes of data: General failure. General failure. General failure. General failure. Ping statistics for 2002:1234:1234::1234:1234: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), I can't get a packet capture of this behaviour. Running this (failing) ping command does not produce any packets in Microsoft Network Monitor. Similarly, attempting a connection with mstsc.exe to a host with an AAAA record produces no traffic until it does a fallback to IPv4. UPDATE: Our hosts are all using publicly-routable IPv4 addresses. I think this problem might come down to a broken 6to4 configuration. 6to4 behaves differently on hosts with public IP addresses vs RFC1918 addresses. UPDATE: There is definitely something fishy with 6to4 on my network. When I disable 6to4 on the Windows client, connections resolve instantly. netsh int ipv6 6to4 set state disabled But as @joeqwerty says, this only masks the problem. I'm still trying to find out why IPv6 communication on our network is completely non-working.

    Read the article

  • nginx 502 Bad Gateway on every external site

    - by Leandros
    I just installed nginx and followed the guides on the official site, to set it up with php5-fpm, but it just won't work. Not even the default site, without php is working outside of my server. Tried listen = 127.0.0.1:7777 and listen = /var/run/php5-fpm.sock Both don't work. I can access http://localhost with lynx on my server, but not from somewhere else (with external ip obviously). Yes, the php5-fpm deamons are running, yes the port (80 and 7777) is opened. Don't work with php-cgi as well. My config: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_buffers 16 16k; proxy_buffer_size 32k; fastcgi_buffers 16 16k; fastcgi_buffer_size 32k; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; } Server config: (symlinked to sites-enabled) server { server_name skilloverflow.de *.skilloverflow.de; root /var/www/blog.skilloverflow.de/htdocs; index index.php; error_log /var/log/nginx/skilloverflow.error.log; access_log /var/log/nginx/skilloverflow.access.log; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { # This is cool because no php is touched for static content. # include the "?$args" part so non-default permalinks doesn't break when using query string try_files $uri $uri/ /index.php?$args; } location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; if (!-f $document_root$fastcgi_script_name) { return 404; } fastcgi_pass 127.0.0.1:7777; fastcgi_index index.php; include fastcgi_params; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } } PHP Version: 5.4.17-1 nginx version: 1.2.1 Debian 6.0.7 Linux 2.6.32 Edit: Lighttpd is still installed, does that matter? It's not running though. Edit 2: No error or access log is generated. They're all empty.

    Read the article

  • Apache reverse proxy POST 403

    - by qkslvrwolf
    I am trying to get Jira and Stash to talk to each other via a Trusted Application link. The setup, currently, looks like this: Jira - http - Jira Proxy -https- stash proxy -http- stash. Jira and the Jira proxy are on the same machine. The Jira Proxy is showing 403 Forbidden for POST requests from the stash server. It works (or seems to ) for everything else. I contend that since we're seeing 403 forbiddens in the access log for apache, Jira is never seeing the request. Why is apache forbidding posts,and how do I fix it? Note that the IPs for both Stash and the Stash Proxy are in the "trusted host" section. My config: LogLevel info CustomLog "|/usr/sbin/rotatelogs /var/log/apache2/access.log 86400" common ServerSignature off ServerTokens prod Listen 8443 <VirtualHost *:443> ServerName jira.company.com SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /etc/ssl/certs/server.cer SSLCertificateKeyFile /etc/ssl/private/server.key SSLProtocol +SSLv3 +TLSv1 SSLCipherSuite DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA # If context path is not "/wiki", then send to /jira. RedirectMatch 301 ^/$ https://jira.company.com/jira RedirectMatch 301 ^/gsd(.*)$ https://jira.company.com/jira$1 ProxyRequests On ProxyPreserveHost On ProxyVia On ProxyPass /jira http://localhost:8080/jira ProxyPassReverse /jira http://localhost:8080/jira <Proxy *> Order deny,allow Allow from all </Proxy> RewriteEngine on RewriteLog "/var/log/apache2/rewrite.log" RewriteLogLevel 2 # Disable TRACE/TRACK requests, per security. RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] DocumentRoot /var/www DirectoryIndex index.html <Directory /var/www> Options FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> <LocationMatch "/"> Order deny,allow Deny from all allow from x.x.71.8 allow from x.x.8.123 allow from x.x.120.179 allow from x.x.120.73 allow from x.x.120.45 satisfy any SetEnvif Remote_Addr "x.x.71.8" TRUSTED_HOST SetEnvif Remote_Addr "x.x.8.123" TRUSTED_HOST SetEnvif Remote_Addr "x.x.120.179" TRUSTED_HOST SetEnvif Remote_Addr "x.x.120.73" TRUSTED_HOST SetEnvif Remote_Addr "x.x.120.45" TRUSTED_HOST </LocationMatch> <LocationMatch ^> SSLRequireSSL AuthType CompanyNet PubcookieInactiveExpire -1 PubcookieAppID jira.company.com require valid-user RequestHeader set userid %{REMOTE_USER}s </LocationMatch> </VirtualHost> # Port open for SSL, non-pubcookie access. Used to access APIs with Basic Auth. <VirtualHost *:8443> SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /etc/ssl/certs/server.cer SSLCertificateKeyFile /etc/ssl/private/server.key SSLProtocol +SSLv3 +TLSv1 SSLCipherSuite DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA ProxyRequests On ProxyPreserveHost On ProxyVia On ProxyPass /jira http://localhost:8080/jira ProxyPassReverse /jira http://localhost:8080/jira <Proxy *> Order deny,allow Allow from all </Proxy> RewriteEngine on RewriteLog "/var/log/apache2/rewrite.log" RewriteLogLevel 2 # Disable TRACE/TRACK requests, per security. RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] DocumentRoot /var/www DirectoryIndex index.html <Directory /var/www> Options FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> </VirtualHost> <VirtualHost jira.company.com:80> ServerName jira.company.com RedirectMatch 301 /(.*)$ https://jira.company.com/$1 RewriteEngine on RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </VirtualHost> <VirtualHost *:80> ServerName go.company.com RedirectMatch 301 /(.*)$ https://jira.company.com/$1 RewriteEngine on RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </VirtualHost>

    Read the article

  • VPN in Ubuntu fails every time

    - by fazpas
    I am trying to setup a vpn connection in Ubuntu 10.04 to use the service from relakks.com I used the network manager to add the vpn connection and the settings are: Gateway: pptp.relakks.com Username: user Password: pwd IPv4 Settings: Automatic (VPN) Advanced: MSCHAP & MSCHAPv2 checked Use point-to-point encryption (security:default) Allow BSD data compression checked Allow deflate data compression checked Use TCP header compression checked The connection always fail, here is the syslog: Jun 27 20:11:56 desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... Jun 27 20:11:56 desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2064 Jun 27 20:11:56 desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections Jun 27 20:11:56 desktop NetworkManager: <info> VPN plugin state changed: 3 Jun 27 20:11:56 desktop NetworkManager: <info> VPN connection 'Relakks' (Connect) reply received. Jun 27 20:11:56 desktop pppd[2067]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Jun 27 20:11:56 desktop pppd[2067]: pppd 2.4.5 started by root, uid 0 Jun 27 20:11:56 desktop NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp1, iface: ppp1) Jun 27 20:11:56 desktop NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp1, iface: ppp1): no ifupdown configuration found. Jun 27 20:11:56 desktop pppd[2067]: Using interface ppp1 Jun 27 20:11:56 desktop pppd[2067]: Connect: ppp1 <--> /dev/pts/0 Jun 27 20:11:56 desktop pptp[2071]: nm-pptp-service-2064 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Jun 27 20:11:57 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1024). Jun 27 20:11:59 desktop kernel: [ 56.564074] Inbound IN=ppp0 OUT= MAC= SRC=93.182.139.2 DST=186.110.76.26 LEN=61 TOS=0x00 PREC=0x00 TTL=52 ID=40460 DF PROTO=47 Jun 27 20:11:59 desktop kernel: [ 56.944054] Inbound IN=ppp0 OUT= MAC= SRC=93.182.139.2 DST=186.110.76.26 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=40461 DF PROTO=47 Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Jun 27 20:11:59 desktop pppd[2067]: Modem hangup Jun 27 20:11:59 desktop pppd[2067]: Connection terminated. Jun 27 20:11:59 desktop NetworkManager: <info> VPN plugin failed: 1 Jun 27 20:11:59 desktop NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp1, iface: ppp1) Jun 27 20:11:59 desktop pppd[2067]: Exit. Does someone can identify something in the syslog? I've been googling and reading about pptp but couldn't find anything about the error "read returned zero, peer has closed"

    Read the article

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • Courier Maildrop error user unknown. Command output: Invalid user specified

    - by cad
    Hello I have a problem with maildrop. I have read dozens of webs/howto/emails but couldnt solve it. My objective is moving automatically spam messages to a spam folder. My email server is working perfectly. It marks spam in subject and headers using spamassasin. My box has: Ubuntu 9.04 Web: Apache2 + Php5 + MySQL MTA: Postfix 2.5.5 + SpamAssasin + virtual users using mysql IMAP: Courier 0.61.2 + Courier AuthLib WebMail: SquirrelMail I have read that I could use Squirrelmail directly (not a good idea), procmail or maildrop. As I already have maildrop in the box (from courier) I have configured the server to use maildrop (added an entry in transport table for a virtual domain). I found this error in email: This is the mail system at host foo.net I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]>: user unknown. Command output: Invalid user specified. Final-Recipient: rfc822; [email protected] Action: failed Status: 5.1.1 Diagnostic-Code: x-unix; Invalid user specified. ---------- Forwarded message ---------- From: test <[email protected]> To: [email protected] Date: Sat, 1 May 2010 19:49:57 +0100 Subject: fail fail An this in the logs May 1 18:50:18 foo.net postfix/smtpd[14638]: connect from mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/smtpd[14638]: 8A9E9DC23F: client=mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/cleanup[14643]: 8A9E9DC23F: message-id=<[email protected]> May 1 18:50:19 foo.net postfix/qmgr[14628]: 8A9E9DC23F: from=<[email protected]>, size=1858, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/pickup[14627]: 1D4B4DC2AA: uid=5002 from=<[email protected]> May 1 18:50:23 foo.net postfix/cleanup[14643]: 1D4B4DC2AA: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/pipe[14644]: 8A9E9DC23F: to=<[email protected]>, relay=spamassassin, delay=3.8, delays=0.55/0.02/0/3.2, dsn=2.0.0, status=sent (delivered via spamassassin service) May 1 18:50:23 foo.net postfix/qmgr[14628]: 8A9E9DC23F: removed May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: from=<[email protected]>, size=2173, nrcpt=1 (queue active) **May 1 18:50:23 foo.netpostfix/pipe[14648]: 1D4B4DC2AA: to=<[email protected]>, relay=maildrop, delay=0.22, delays=0.06/0.01/0/0.15, dsn=5.1.1, status=bounced (user unknown. Command output: Invalid user specified. )** May 1 18:50:23 foo.net postfix/cleanup[14643]: 4C2BFDC240: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/qmgr[14628]: 4C2BFDC240: from=<>, size=3822, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/bounce[14651]: 1D4B4DC2AA: sender non-delivery notification: 4C2BFDC240 May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: removed May 1 18:50:24 foo.net postfix/smtp[14653]: 4C2BFDC240: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.211.97]:25, delay=0.91, delays=0.02/0.03/0.12/0.74, dsn=2.0.0, status=sent (250 2.0.0 OK 1272739824 37si5422420ywh.59) May 1 18:50:24 foo.net postfix/qmgr[14628]: 4C2BFDC240: removed My config files: http://lar3d.net/main.cf (/etc/postfix) http://lar3d.net/master.c (/etc/postfix) http://lar3d.net/local.cf (/etc/spamassasin) http://lar3d.net/maildroprc (maildroprc) If I change master.cf line (as suggested here) maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d ${recipient} with maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d vmail ${recipient} I get the email in /home/vmail/MailDir instead of the correct dir (/home/vmail/foo.net/info/.SPAM ) After reading a lot I have some guess but not sure. - Maybe I have to install userdb? - Maybe is something related with mysql, but everything is working ok - If I try with procmail I will face same problem... - What are flags DRhu for? Couldnt find doc about them - In some places I found maildrop line with more parameters flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d $ ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender} I am really lost. Dont know how to continue. If you have any idea or need another config file please let me know. Thanks!!!

    Read the article

< Previous Page | 891 892 893 894 895 896 897 898 899 900 901 902  | Next Page >