Search Results

Search found 87766 results on 3511 pages for 'dns server'.

Page 90/3511 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

  • how to create a home server ?

    - by Eva
    i download appserv and install on my computer and set the default ip in my Default Gateway but when other people want to connect to my home server , they get the error of time out ! what am i going to do ? my server address : http://192.168.210.230/ and my firewall is now off ! also my antivirus pls help me . Thanks in advance

    Read the article

  • Can I upgrade a Windows 2000 domain to 2008 and demote the 2000 server without clients attached?

    - by techie007
    Hi all, We're planning to replace a Windows 2000 domain controller with a new 2008 DC (new hardware). We've elected to take the route of getting the 2000 domain schema up-to-snuff, join the 2008 server, upgrade it to a DC, and after replication demote the 2000 server (eventually to be taken off-line). The goal being to not have to visit all the workstations, and limited domain down-time. :) We want bring the old server here and do all the backups, Domain prep, migration and role transfers here, and then (hopefully) just plop the new 2008 back in place after it's done, and join the 2000 server back as a member server (so we can then do folder migrations, etc.). Can this server work be done off-site, without the workstations attached? If we do this will anything need to be done to the clients, once the new DC is physically in place, so they contact the new 2008 DC; or will they just 'know' and continue on using the existing domain settings/user profiles, etc.? Thanks in advance! :)

    Read the article

  • How do I either use DNS forwarding or aliasing to display a specific domain?

    - by PeanutsMonkey
    We have a domain abc.com from which a particular page will display the contents from the domain def.com which does not belong to us. Now rather than display def.com in the address bar in the browser, we would like to continue using abc.com. We would like to achieve it without using iframes or screen scraping. Is there a way to achieve what we are after using DNS forwarding or aliasing? If so how? We have a choice of using Microsoft's DNS server or BIND.

    Read the article

  • Is it possible to upgrade using the Windows Server 2012 evaluation?

    - by Cerebrate
    I've got a Windows Server 2008 Standard installation here that I'm trying to upgrade to Windows Server 2012 Server, using the evaluation version. (The scenario is essentially that I need to test the upgrade, and specifically the upgrade process, before we spend the money on going ahead with the actual upgrade.) When I try to upgrade, it fails with the message: "Windows Server 2008 Standard cannot be upgraded to Windows Server 2012 Standard Evaluation (Server with a GUI). You can choose to install a new... (etc., etc.)" Is this (non-upgradability) a known limitation of the evaluation version? (Unfortunately, I haven't found a clear answer on this point.) And if not, any thoughts on where else I might look for the problem and solutions to it?

    Read the article

  • VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

    - by macke
    I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

    Read the article

  • Doesn't DNS diversity negatively affect performance? Why/how?

    - by cnst
    If you look at the press releases of various orgs that run the internet, you can see them praise the fact that now they run root server X in city Y, as if that magically makes everyone in city Y get all the relevant resolutions from the local server X, instead of going 200ms across the oceans and lands to other continents for resolutions. Similarly, the zones of some geographical domain names, like .ru, are being mirrored not just within Europe, but also, for example, in Hong Kong, which is no more, no less, but is about 300ms away from central Europe, since the traffic is often crossing the two oceans on each way. Doesn't all of this negatively affect DNS performance? Isn't it more of a liability to have a diverse pool of geodispersed authoritative servers, especially if your target audience is quite geographically concentrated? Perhaps a better question is, are there any DNS resolvers that use something better than the naive round-robin for choosing which authoritative server to contact?

    Read the article

  • Could SQL Server 2008 replication be used with NLB to allow unlimited scaling of reporting servers?

    - by John Keranos
    We are currently using transactional replication in SQL Server 2008 to keep a secondary reporting server synchronized with a primary database server. This has been working weel and keeps some of the load off the primary server. Would it be possible to scale this solution to multiple reporting servers? We're expecting an increased load of read-only queries and it would be nice to be able to add reporting servers as needed. The general idea was the following: Each reporting server would use a "pull" subscription to get the data from the primary database publication. These reporting databases could be a couple of minutes behind the primary server without it being an issue. The reporting servers would be NLB'd together. All read-only queries would be directed to the NLB which should spread the load across the servers.

    Read the article

  • How to update debian dns server? New VM with same hostname as old VM

    - by opensourcechris
    We run several linux VM's on our Hyper-V cluster. Our old IT manager configured the dns server to resolve the url 'devlabs.ourdomain.com' to a debian squeeze apache webserver hosted on the hyper v cluster with the hostname: devlabs. We recently created a new Ubuntu vm to replace the original squeeze vm. When we created the new Ubuntu VM we used the same hostname of 'devlabs" to name the new VM. My problem is that now I am only able to access the new Ubuntu VM by using the IP address. How can I update our DNS server to point the url 'devlabs.ourdomain.com' to the new VM?

    Read the article

  • What kind of issues would occur if resolve.conf had no dns servers set?

    - by Stuart Woodward
    I want to create a server for a customer and have that customer finish the configuration for themselves. It was been decided that rather than setting default DNS servers (i.e. something like Google's) that the customer should enter the information by themselves. I assume that the customer is technically competent enough to do this. If however they forget or neglect to set this up they might spend some time trying to figure out what is wrong and eventually contact support. (In this case, I think that setting a default might have been better.) Apart from the obvious inability to resolve hosts, what other issues might they face until they have set valid dns servers in resolve.conf?

    Read the article

  • Intermittent timeout when connecting to Sql Server, what do I look for?

    - by Will
    Sql Server 2008 Standard 64bit on Windows Server 2008 R2 virtual machine hosted on a Hyper-V server. I'm getting intermittent timeouts when connecting to the server. This happens for both windows and Sql Authentication. May timeout every 2 out of 5 tries in different applications. When the connection times out, I can see (in Profiler) that no connection was made. Firewall is holey, server port is static (good ol' 1433). If I ping /t the server I get a steady connection that wavers between 1 and 2 ms. Any ideas what else to try would be appreciated, thanks.

    Read the article

  • Is setting an empty/blank DNS A record allowed?

    - by John
    I'm trying to wrap my head around the wonderful world on DNS. I have created a zone file for example.com which contains: @ A 1.2.3.4 * A 1.2.3.4 However I am also setting up my local DNS, local.example.com which I have created a separate zone file for containing the following: machine1 A 192.168.0.1 machine2 A 192.168.0.2 When I dig machine1.local.example.com it returns A record 192.168.0.1, great. Sadly, badmachine.local.example.com returns 1.2.3.4, as does local.example.com. I'm not sure of the best way to prevent this. If I add the following to the local.example.com empty A records are returned for the above 2 examples as is the behaviour I desire: @ A * A Is this allowed? Is this best practice, or am I doing things terribly wrong? I'm using PowerDNS with BIND backend. Thanks for your thoughts!

    Read the article

  • How to setup dns to redirect app.example.com to another ip?

    - by AZ.
    I have a site www.example.com running on a hosting company. Now I want to create a separate web app on my VPS and let it accessible via app.example.com How can I set the DNS to redirect app.example.com to my VPS' ip address? CNAME or A Record? Also, If I want to do a mail server on my VPS too, how to setup the DNS? EDIT: Existing site: www.example.com Location: some hosting company that I don't control. It's running PHP with nginx I guess (or aphache) New site (that I'm working on): app.example.com Location: my VPS, it has an IP address, the VPS is running nodejs. It can run along with nginx but currently it's not. I want the existing website continue working (as customer visit www.example.com) and I want customer to visit app.example.com for some new features. The two websites are NOT on the same server and not using the same IP address.

    Read the article

  • Roughly, what percentage of users will reach changed DNS?

    - by user3722246
    If my main server go offline for some reason for +1hrs, I'm planning to make a DNS change so users will access secondary server. It is not a perfect solution to decrease downtime but it is simple and would work. I'm not sure about its usefulness. So I have a question. If I'm going to make a DNS change to an A record for my domain (changing from one IP to another), what percentage of users are moved over to the new info in 2hrs? (roughly) I know this is a vague question and there are lots of variables but any input is welcomed because I had painful downtime experiences and don't want to experience it again. Thanks

    Read the article

  • Server not resolving after restart

    - by DomainSoil
    I restarted our server today, and now cannot for the life of me get anything to resolve... I suspect it has something to do with our routes. I've tried numerous Google results to no avail. Here is as far as I've gotten: [root@www ~]# route -n Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.101 0.0.0.0 255.255.255.255 UH 0 0 0 eth1 0.0.0.0 192.168.1.101 0.0.0.0 UG 0 0 0 eth1 Things you need to know: Our server (CentOS 6.3) runs two virtual machines, one live, and one development. They mirror each other as much as possible, but I can't find where I've went wrong with the live server. The dev server works fine. [root@www ~]# ifconfig eth1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet6 addr: xxxx:xxx:xxxx:xxxx:xxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118206 errors:0 dropped:0 overruns:0 frame:0 TX packets:165 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7825749 (7.4 Mib) TX bytes:7146 (69.2 KiB) Interrupt:28 [root@www ~]# /etc/init.d/network status Configured devices: lo Auto eth0 Currently active devices: lo eth1 If there is any other information you need, please don't hesitate to ask!

    Read the article

  • Guests can't access KVM host server by name although nslookup and dig returns correct record

    - by user190196
    So I have a KVM host that also runs an apache server with some yum repos. The VM guests are connected to the default virtual network, which is configured to offer DHCP and forwarding with NAT on virbr0 (192.168.12.1). The guests can successfully access the yum repos on the host by IP address, so for example curl 192.168.122.1/repo1 returns the content without problems. But I'd like to have the guests be able to reach the web server on the host by name rather IP address. I added the desired name record to the host's /etc/hosts file and libvirt's dnsmasq service seems to be serving that correctly to the guests since nslookup and dig successfully resolve the name on the guests: [root@localhost ~]# nslookup repo Server: 192.168.122.1 Address: 192.168.122.1#53 Name: repo Address: 192.168.122.1 [root@localhost ~]# dig repo ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6 <<>> repo ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55938 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;repo. IN A ;; ANSWER SECTION: repo. 0 IN A 192.168.122.1 ;; Query time: 0 msec ;; SERVER: 192.168.122.1#53(192.168.122.1) ;; WHEN: Tue Sep 17 02:10:46 2013 ;; MSG SIZE rcvd: 38 But curl/ping/etc still fail: [root@localhost ~]# curl repo curl: (6) Couldn't resolve host 'repo' While a request via ip address works: [root@localhost ~]# curl 192.168.122.1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html> <head> <title>Index of /</title> [...] Same with ping: [root@localhost ~]# ping repo ping: unknown host repo [root@localhost ~]# ping 192.168.122.1 PING 192.168.122.1 (192.168.122.1) 56(84) bytes of data. 64 bytes from 192.168.122.1: icmp_seq=1 ttl=64 time=0.110 ms 64 bytes from 192.168.122.1: icmp_seq=2 ttl=64 time=0.146 ms 64 bytes from 192.168.122.1: icmp_seq=3 ttl=64 time=0.191 ms ^C --- 192.168.122.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2298ms rtt min/avg/max/mdev = 0.110/0.149/0.191/0.033 ms I tried adding repo 192.168.122.1 to the guests' /etc/hosts files but still no dice. Also tried changing guests' /etc/nsswitch.conf with both: hosts: files dns and hosts: dns files I've read the relevant libvirt documentation and I'm not sure where else to learn more about this and be able to move forward with it.

    Read the article

  • Resolving a FQDN to a local server

    - by Joe
    Hi all, I have a domain name with WebFaction. I created a new subdomain that I want to point to a local server behind a NAT firewall. I can change the DNS records of the subdomain. What do I change so the FQDN points to the local server? Thanks, Joe

    Read the article

  • Root, Local and Authoritative name server?

    - by thedp
    I've tried to read in Wikipedia about the key features of Root, Local and Authoritative name servers... But I have a problem understanding what each type of dns server does. Can someone please give me a short explanation of the three? Thank you

    Read the article

  • Support for 15,000 Partitions in SQL Server 2008 SP2 and SQL Server 2008 R2 SP1

    In SQL Server 2008 and SQL Server 2008 R2, the number of partitions on tables and indexes is limited to 1,000. This paper discusses how SQL Server 2008 SP2 and SQL Server 2008 R2 SP1 address this limitation by providing an option to increase the limit to 15,000 partitions. It describes how support for 15,000 partitions can be enabled and disabled on a database. It also talks about performance characteristics, certain limitations associated with this support, known issues, and their workarounds. This support is targeted to enterprise customers and ISVs with large-scale decision support or data warehouse requirements. The Future of SQL Server MonitoringMonitor wherever, whenever with Red Gate's SQL Monitor. See it live in action now.

    Read the article

  • bind named server - forward some requests to other servers

    - by Pentium100
    Is there a way to make bind answer some queries but forward all other queries (of the same domain) to another server, as in: example.com A 127.0.0.1 www.example.com A 127.0.0.1 everything not on this list (example.com MX, ftp.example.com A etc) - ask 192.168.0.1 (another DNS server) Essentially I want to intercept some (but not all) queries going to (in this example) 192.168.0.1 and answer for it. example.com A- intercept www.example.com - intercept example.com MX - pass trough ftp.example.com - pass trough

    Read the article

  • Unable to resolve FQDN, hostname works

    - by HannesFostie
    We are having an issue where computers who are not part of the domain cannot resolve the FQDN of a server (but regular hostname and ip do resolve). The strange thing is that this does work when the computer is added to the network. Our domain name is rather long, its something along the lines of "team.dept.company.com", could that be it? DHCP server passes along the proper DNS, Name and WINS servers, as well as the domain name. I thought that should've solved the problem, but apparently not really. Our domain is still windows2003 EDIT: I am starting to believe I can narrow this down to a problem either with the vmware tools NIC drivers that are embedded in my winPE boot image, or to the fact that I'm trying to do this from inside a VM. Pinging a FQDN at the same time when using a different task sequence on a physical machine works.

    Read the article

  • Nginx config rewriting subdomain name to 1st URI segment

    - by tim peterson
    I'm unable to do the following nginx.conf rewrite: test.mysite.info to: mysite.info/test here's what i've tried: server { server_name test.mysite.info; rewrite ^ https://mysite.info/test/$request_uri; } I know my DNS (Route53 AWS) is correct b/c: test.mysite.info redirects to mysite.info (just not mysite.info/test) I have an Apache server handling mysite.com which using .htaccess I can rewrite test.mysite.com to mysite.com/test. I haven't changed anything else from the default nginx.conf installation so I'm totally confused as to why such a simple thing isn't working. Here is my full nginx.conf file if that is helpful.

    Read the article

  • What is the best way to configure Apache or AWS to support a Rails multi tenancy application that allows each customer to have their own domain name?

    - by Ryan Arneson
    I'm building a Rails 3 SaaS site that allows for multi-tenancy. When a customer signs up they put in their own domain name, e.g. example.com. I need example.com to point to my SaaS application and serve them their content. My questions are as follows: Do I need to create an Apache vhost for each customer using their own domain? Is there an easier way with CNAME's to just have the customer point to the IP address of my server(s) that then forwards the request onto my application through some catch all vhost? Would I be able to create the CNAME record for the customer so they don't have to do any setup? Would this be a case better suited to Amazon Web Services? Any help or explanation or corrections on my understanding of dns would be appreciated. I'm a developer so the server ops portion of this is a bit cloudy.

    Read the article

  • Problem with mydomain.com no prefix

    - by user10711
    Short question is. I have a domain name mydomain.com, we have a company website hosted on an IIS server 2003 configuration. Going to the address bar and typing www.mydomain.com will show my website properly. Typing mydomain.com into the same address bar will return an under construction website that seems to be hosted on my webserver. My domain name is hosted by Network Solutions, and I think I have it configured correctly using their advanced DNS services. In their settings I have www.mydomain.com, * and @ also pointed to the ip address of my webserver. On my webserver itself using the IIS manager, under the Web Site, and Web Site Identification. I have configured both www.mydomain.com and mydomain.com configured to work on the IP address on the webserver. I am hosting 4 different websites on my IIS server, all the other sites use prefixes other than www, an example is mail.mydomain.com and a couple of others. None of them show an under construction page as their default homepage. I am really at a loss as to why it would show an under construction page, especially since it seems to be pointing to the correct server. The reason this is such a big deal is because when you search for my company on google, the link there is for mydomain.com and by clicking on the link it shows under construction which is really quite embarrassing. Thanks in advance for any help and if there are further questions let me know.

    Read the article

  • Why my AD domain doesn't work on my laptop

    - by Frederick Marcoux
    I have installed Windows Server 2008 R2 on a virtual machine with a bridged network card and installed Active Directory. I configured it and when I try to connect my laptop to the domain name, in this case, creationsmicroweb.ca (doesn't exist, don't try, for local only), I can't get connected. My laptop just doesn't see it. I don't know why! There's a resume of my config: Domain Name: creationsmicroweb.ca Forest: new, principal domain controller IP: Fixed (192.168.1.100) DNS Name: none (just for local, I ignored them) NETBIOS name: MICROWEB If someone as found why, please help me! This is for my business that I'm starting and I can't find why it doesn't work!

    Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >