Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 90/128 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Enabling GTX 570

  - by Silas

  Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• error: no such partition after 11.10 upgrade to 12.04

  - by Alan King

  -I recently upgraded my 11.10 install to 12.04 LTS and got the above error message upon reboot after a GNU GRUB version ubuntu3 display showing Ubuntu 3.2.0-23-generic pae and other kernels or memory tests to choose from. The upgrade had to be done by CD because the Update Manager did not show the 12.04 upgrade option. After selecting the default install option of upgrading 11.10 to 12.04, I was presented with a screen saying that I had not specified a swap partition. Upon selection the 'back' key, I was taken to a partition page which listed two current partitions (only Ubuntu 11.10 had been installed - no Windoz): an ext4 partition plus a small 1.8GB partition. I double clicked the small partition and selected it as the swap partition even though I wondered at the time why this even came up. I can see the two user folders under home from the file manager screen while runnning 12.04 from the CD but if I try to access either one an error message is displayed saying I do not have permission while I get a loading message in the lower right corner of the window that does not go away. I have two questions: Can I access the user folders prior to recovery via the Terminal? If so, how? How do I fix the GRUB issue?

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• Wifi interface changes name seemingly at random

  - by ray_voelker

  I'm currently having some issues getting a wireless interface to work continuously under an install of Ubuntu 12.04.1 LTS. Some of the issues I'm experiencing include Connection will drop out after some time after it has initially worked. Interface will be a different name after a reboot. For example, wlan0 will become wlan4 when using the ifconfig -a command. Ubuntu will take a long time to boot, looking for network adapters. The purpose of this build is to function as a web kiosk in a library. The computer is supposed to boot up into a web browser, and allow for browsing of the catalog. For some reason this interface does not appear to be working as it should. Are there any explanations for some of these problems I'm having, and perhaps some solutions? The wireless card appears as this after doing an lspci ... Ralink corp. RT2561/RT61 802.11g PCI In the /etc/network/interfaces file I have the following configuration for the interface. auto wlan0 iface wlan0 inet dhcp wireless-essid UDwireless wireless-mode Managed Thanks in advance for help on this.

  Read the article

• Directory Synchronization

  - by Robert May

  We’re using federated security with Office 365 and everything was running swimmingly and then I started getting the following error when trying to synchronize security information: “An unknown error occurred with the Microsoft Online Services Sign-in Assistant. Contact Technical Support.” Great.  Very descriptive.  In the event viewer, you get a bit more detail: GetAuthState() failed with -2147186688 state. HResult:0. Contact Technical Support.  (0x80048831) If you do some searching, you’ll find that there are a couple of MSDN articles about this error.  In KB2502710 you’re told to reinstall sign in assistant.  This one requires a reboot.  In KB2517393 you’re told to make sure that your proxy settings are working correctly.  I’m not using a proxy and everything was set up right. Rather frustrating and I couldn’t figure out what was going on.  What finally keyed me in was the error number being presented.  Rather than 80048800, which is listed in the second article, I was getting 80048831.  I did a quick search and found something that was seemingly unrelated here.  Could it really be so simple as the password having expired for my synchronization user? Turns out, it was that simple.  Once the password was reset and reentered, everything worked great again. Since this isn’t a user that humans use, I also don’t want the password to expire.  You can find the instructions for that (use Set-MsolUser –UserPrincipalName <user ID> –PasswordNeverExpires $true) here. Technorati Tags: Office 365

  Read the article

• VMware Player 5.0 or VMware Workstation 9.0 after upgrade to Ubuntu 12.10

  The upgrade process Upgrading Ubuntu 12.04 to latest version 12.10 - aka Quantal Quetzal - is straight forward and you only need to follow the offical upgrade instructions. Short version on the console looks like this: sudo do-release-upgrade This will update the repository entries, and start the upgrade process. After some minutes or hours of download and installation, you have to reboot your system once to get the new kernel loaded. As time of writing, I'm on '3.5.0-17-generic'. And as with any modification of the kernel version, you have to compile the necessary kernel modules to get VMware Player or Workstation up and running. Usually, this happens the first time you try start your VMware software and that's it. Well, again not so this time. Getting the kernel patch Luckily, the community over VMware is very active and you can get a new kernel patch in the online forums here. Get the download and put in a folder have write permissions. Then you extract the archive on the console like so: tar -xjvf vmware9_kernel35_patch.tar.bz2 Then you change into the newly created folder: cd vmware9_kernel3.5_patch/ And you execute the available shell script as root (superuser) like so: sudo ./patch-modules_3.5.0.sh This will stop any running instances of VMware software, patches the source files and runs the compile process for your active environment. This might take some time depending on your machine, and once completed you can start VMware Player or Workstation as previously. In case that you are going to apply the patch again, the script will simply quit with the following output: /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting You might remove the .patched file in case that you upgraded/changed your kernel and you need to apply the patch again. Disclaimer: The patch is "as-is" and the patcher is originally created by Artem S. Tashkinov, and later modified by An_tony. Please refer to the VMware forum in case of questions or problems. There are also patches available for older versions of VMware Player or Workstation.

  Read the article

• Do i need to restore iptable rules everytime on boot?

  - by capdragon

  Every time i reboot i loose the iptables rules that took me sooo long to enter. I know i can save them and restore them on boot but is there anyway to save them forever? Do i really need to restore them on boot every time? Seriously? The problem is I have a HUGE list of IPs in which i use a while loop to load them in. This can take upwards of 10 minutes. This is my home FTP server. It's a small vm with 1gb ram and very little processing power. There are so many IPs because I've pretty much given up on the Asian continent. I don't need them to be hitting up my ftp server everyday with brute force. I also block gov. monitors, trackers and spammers. This is the while loop i use to load in the list. grep INPUT block.list | while read LISTA; do sudo iptables -A $LISTA; done

  Read the article

• display driver problem

  - by Robert

  I just recently installed Ubuntu 12.10 on my laptop and am keeping windows 7 as a back up for when I get stuck like now..... After I installed Ubuntu I got on line and was reading about some of the things to do after Installing for the first time. One of them was looking for additional drivers witch I did and found two display drivers. Both drivers were from Ubuntu. However after install and a reboot I can't see any of my menu bars.....no app bar on the side.....no bar at the top of the display...nothing. I did have a file on the desktop that I was able to open. And I just learned that ctrl+alt+T gets me a form of command prompt. this worked but I don't know how to use it. How do I get my menu bars back?? is there a way to uninstall the drivers? I am really new to Ubuntu and like it so far but am having problems getting over the learning curve.

  Read the article

• How to Install Broadcom Wireless Drivers (BCM43xx)

  - by Fer1805

  I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

  Read the article

• OSSEC HIDS Notification "Unknown problem somewhere in the system." (seems like hdd issue)

  - by John

  from what i understand somethings is wrong with hdd i am trying to find some commands in order to run some tests to check if hard disk is OK I will post a full list of logs after REBOOT of system: "Unknown problem somewhere in the system." kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:c8:38:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: ata2.00: error: { UNC } kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:78:88:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461400 on sda1) kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461672 on sda1) Also some of this logs are duplicate or even more. Thanks.

  Read the article

• Upgrading Ubuntu(32 bit) 10.10 -> 11.04 fails and causes a kernel panic on boot

  - by Ubuntu Upgrade

  On Ubuntu 10.10 machine Upgrade to Ubuntu 11.04 using the update manager. The upgrade fails and leaves the system in an unstable state. When I reboot the system I get a kernel panic on boot. The error points to /opt/abc/runtime/lib/libc.so.6. By researching on this I found that there is a third party software abc causes problem. It has it's own runtime(libc) library. In /lib/ directory there is a link file /lib/ld-abc.so.2 ---/opt/abc/runtime/lib/ld-linux.so.2. If we rename this file to /lib/abc.so.2 or remove this file the the upgrade is success. Here is the upgrade log of where it crashes(apt-term.log) ===== Services restarted successfully. Processing triggers for libc-bin ... ldconfig deferred processing now taking place /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.11' not found (required by /usr/bin/dpkg) /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) ===== Could you please let me know what would be the problem of having a run time link library file in /lib directory. Does the ubuntu upgrade check the 3rd part runtime as well?

  Read the article

• Can't boot after compiling 3.1 kernel, can only get to terminal

  - by olssy

  Long story short: I tried compiling kernel 3.1 on Ubuntu 11.10 at the same time I had an update waiting for a reboot. Computer would boot to a black screen and would hang there. Ended up installing 11.10 on top of old install with a Live CD. Now I had a purple screen on bootup but it would end up booting. Realized Grub was the problem and tried some stuff but nothing worked. I ended up trying to install propriety ATI video drivers and since that nothing has worked, no grub menu(purple screen) and when it boots into the kernel it ends up hanging, I can sometimes get a terminal up with alt-fx. I have tried removing the ati drivers with the ati script, purging my fglrx driver, reconfiguring my xconf.org and following any tutorial I can find about fixing a broken graphics driver, but to no avail. I've gotten to a point were it seems that the ati propriety drivers are correctly loaded but it still has no grub boot menu and won't boot into Ubuntu. I've chased down my logs and this line is from kern.log: unity-greeter[3269]: segfault at 0 ip b7245cbbsp bf9d3900 error 4 in libgio-2.0.so.0.3000.0[b71ad000+142000] That line leads me to believe I don'T have the correct libgio-2 librairy on my system but have no idea how to find out what package has the correct version... My xorg.conf has no errors and seems to imply the fglrxdrm module got loaded correctly. Would be a bit complicated pasting the whole file here but if it would help I'll post it. LAstly, running fglrxinfo give me: Error: Unable yo open display (null) Any help or link to another tutorial would be appreciated. Thanks.

  Read the article

• Documents stored on separate internal drive, Ubuntu doesn't notice on startup

  - by PlanoAlto

  My machine has Windows 7 Ultimate x64 and Ubuntu 12.04 LTS running side-by-side on a single hard drive with GRUB bootloader, each with 500 GB storage. I keep my personal documents on a separate 1TB hard drive so they remain isolated from any changes I make to the OS drive, but when Ubuntu starts it does not seem to notice my documents drive. While I've installed and worked with Ubuntu 12.04 Server x32 before, using it as a desktop OS is new to me. I use my documents drive for all of my personal data, including wallpapers and music, so it is imperative that Ubuntu recognize it on startup. Concerning the two specific examples: Ubuntu loads with the default blue-colored desktop instead of my desired picture of the spectacular Carina galaxy. When I right-click the desktop and select "Change Desktop Background", it wakes up from its amnesia and loads the proper background. As for my music, Rhythmbox defaults to an empty library upon reboot, forcing me to reload the settings manually each time. This gets quite tedious because I certainly can't work to my full potential without my music. The second thing I would like to address is making Ubuntu point the documents directories in ~ to their appropriate counterparts on the 1TB documents drive. I realize that this question is not new, but when I create the symbolical links, they established themselves inside the directories and did not convert the directories themselves into symbolical links. I also prefer not to move the files themselves from their current location on the 1TB drive. I believe this would also help the Rhythmbox library problem as well considering it's a default directory for the music player. Excerpt from fstab: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb6 during installation UUID=057ac83e-76ad-460d-86e5-b6d46e9b1d80 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb7 during installation #UUID=1183df90-23fc-44e4-aa17-4e7c9865d5cb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 That's enough content for one question. I really like the Ubuntu experience so far since it doesn't treat me like an idiot out of the box (can't say the same for Windows) so I can't wait to hear from the community! Thanks for your help in advance.

  Read the article

• xubutnu Nvidia Settings not remembered

  - by hozza

  I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Error on /home prevents OS boot

  - by mdrg

  Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

  Read the article

• How to recover missing folders in a Windows-Ubuntu dual-boot system?

  - by UnhappyGhost

  I have Windows 7 and Ubuntu 12.04 as dual-boot and on the same 500GB HDD. I have partitioned the drive into NTFS file system from Windows before I installed Edubuntu 12.04 in the remaining free space. Now, there is a drive(G:) accessible through Windows and has few folders. I boot into Edubuntu and create a folder "LinTor" and download movies and few software from torrentz. Before I download, it showed 49GB free out of 62GB. After all the downloads it showed 31GB free out of 62GB. Then I boot into Windows and I couldn't find this "LinTor" folder. I wondered that might be happening as I hibernate Edubuntu (using sudo pm-hibernate) and then boot into Windows. I then create another folder in the same drive(G:) with the name "001" to check if this was accessible from Edubuntu. Now I reboot into Edubuntu to find that "LinTor" folder has disappeared and "001" folder wasn't showing up either. Surprisingly, the drive size still shows 31GB free out of 62GB but when I check it from Windows, it shows 49GB free of 62GB. There is one thing I would like to mention. When I was trying to unmount the NTFS drive(G:) from Edubuntu before booting into Windows, it prompted me with this message: Do you want to empty the trash before you unmount the drive? Once the trash is emptied the data is permanently deleted and cannot be recovered. Please help me understand what could be the problem and how do I recover the missing folder?

  Read the article

• X crashes and GNOME loses all its configuration

  - by Oli

  About every 3 days on my desktop (always on), X crashes, gdm restarts and it dumps me at a login screen. When I log in Gnome appears to have lost a lot of its settings: it plays sounds in weird places, UI elements look like they're from the 90s (GTK+ defaults) and it's generally pretty hideous. Note everything works fine. It's not like my profile doesn't exist because I can browse the internet fine (Firefox knows my bookmarks, history, passwords, etc) and my desktop is unscathed (apart from the icon theme). Manually restarting gdm doesn't fix this. I have to do a full reboot. Now I'm almost certain that this is a nvidia issue causing X to baulk (I've seen similarish threads on nvnews) and I'm happy with that (my fault for running their latest drivers all the time). What I'm concerned about is why Gnome looks so fugly. Is there anything I can do to force it to reload its settings without restarting the whole computer. Restarting is an issue for me as I run several daemons that other computers on the network depend upon. This is what I mean by ugly/fugly... Look at that scroll bar!

  Read the article

• No grub selection after installing kernel Ubuntu 14.04

  - by CPJ

  I have installed a new kernel on my system which can be found by grub but when I restart I can only select the old kernel. Things I tried in other threds with similar problems didn't help. sudo update-grub gives Generating grub configuration file ... Found linux image: /boot/vmlinuz-3.15.0-031500rc2-lowlatency Found initrd image: /boot/initrd.img-3.15.0-031500rc2-lowlatency Found linux image: /boot/vmlinuz-3.15.0-031500rc2-generic Found initrd image: /boot/initrd.img-3.15.0-031500rc2-generic Found linux image: /boot/vmlinuz-3.13.0-24-generic Found initrd image: /boot/initrd.img-3.13.0-24-generic Found memtest86+ image: /boot/memtest86+.elf Found memtest86+ image: /boot/memtest86+.bin done However, afer a reboot I can only choose the 3.13 kernel. Any ideas what happened? I I have a full encrypted hard drive so maybe I have overseen something while installing the new kernel to get this work? The grub config file is GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT_QUIET=false GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_ENABLE_CRYPTODISK=1 Any ideas? Thanks.

  Read the article

• Dual boot problem with ubuntu 12.04 and Vista

  - by vendella dahlahdoo

  Greetings from New Zealand. I have installed Microsoft Windows Vista and then installed Ubuntu 12.04 on my refurbished Compaq nx8220 laptop. I get the following infamous head hurting prompt continually. error: no such partition. grub rescue> Have tried most of the common recommended solutions. Live-CD then install Boot-Repair through the Terminal didn't work. It repaired all the linux stuff when restoring grub and then can't boot into Windows Vista. When I use Boot-Repair to fix the MBR, then I can't boot into Ubuntu. Tried installing BCD 2.1 in Vista and tried all the options one after another in BCD. Still no Ubuntu when selected through the options menu from BCD on restart/reboot. I have tried the boot repair option on the Ubuntu server CD-ROM, tried installing earlier versions of Ubuntu 11.04, 11.10, and Ubuntu server 11.10 and 12.04. Still the same result. I tried deleting the Ubuntu partitions through Vista a number of times and reinstalling Ubuntu. I have been trying and retrying all the options in Boot-Repair in different combinations for the past week and a half. I have tried at least 10 times installing and reinstalling Ubuntu. I really love Ubuntu and believe I have exhausted most of the recommended solutions and have spent too much time on this. Its driving me nuts!! please can someone help, I have finally given up (sigh). The following are some outputs from Boot-Repair from my last attempts. http://paste.ubuntu.com/1019227 http://paste.ubuntu.com/1019264 I was only allowed to post two links being a newbie. The only thing left for me to do is the flying Samoan dropkick laptop trick. Thanks in advance. Francis.

  Read the article

• Broadcom 4313 doesn't work following 12.04 upgrade

  - by Lucas

  I have an hp G62-228Ca laptop with a BCM4313 previously running Ubuntu 11.10. I ran the 12.04 upgrade last night without much thought. Following the upgrade and mandatory reboot, the wireless card no longer shows up in the network manager, the first time I've had any kind of issues with wireless under Ubuntu. I've done much Googling on the issue but so far I haven't found a permanent solution. Mucking around with some packages though (I've installed five different ones or so), I've managed to devise a workaround that I must run every time I boot the laptop. I have to remove the Broadcom STA driver and reinstall it. Inspiration taken from here: WiFi does not work, Broadcom STA Wireless driver does not work on a BCM4313 After the second modprobe command, the wireless reappears in the network manager and ten seconds after that I'm back on the wifi. If anyone can provide some advice on how to fix this permanently I will be extremely grateful. I'd rather not roll back to 11.10 or reinstall, but I will if I need to. Just let me know if you need the output from any terminal commands. Thanks in advance!

  Read the article

• Kubuntu 11.10 Lot of Networking problems

  - by Cobraone

  Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

  Read the article

• Why doesn't my Nvidia driver support 1280*1024?

  - by Alvar

  EDIT: I think the problem is in the NVIDIA x server, that doesn't support an RGB screen from 1990. The screen was the best of them all when it was released. This a strange thing! In windows the EDID must work because 1280*1024 is used as max resolution, but in ubuntu those stuff aren't being received, so how do I tell ubuntu/nivida to find those EDID stuff? Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. The screens model name is IntelliColor Display/20 and the name of the company is "radius".recived Well, twin view is working but the only maximum resolution is 1024*768. I'm using nividas x server program. If I force it to use 1280*1024 it all crashes and I have to force a reboot. alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

  Read the article

• Can't start system due to mdadm failing

  - by user101212

  I used to have a 5-disk RAID5 partition, all working very well. I have then decided to add 3 more disks on it, totaling 8 equal disks. I've opened Webmin and just asked to add the disks. Then I've realized the three disks had NTFS partitions, wich mdadm didn't complain, so I tried to stop the growing to remove the Windows partitions. I've tried to remove a disk using the same Webmin, but (as you might guess and call me fool...), the system became unstable. By restarting the system, I've started receiving these messages: "udev[126]: timeout: killing '/sbin/mdadm --incremental /dev/sdh1' [311]" "udev[124]: timeout: killing '/sbin/mdadm --detail --export /dev/md0' [316]" I've formated the system disk, hoping to get a system up and running. I did that with all RAID disks disconected, so everything was fine. I then reconnected the disks, wich was also ok. And finally installed mdadm using apt-get. By reboot, the system has found the mdadm intention of growing the system, so the same messages appear again. I other words: I can't even reach a command prompt to do something. Any ideas of what to do? I believe I could turn off the system, disconnect the disks and look for the mdadm.conf file. Would that be a good idead? I'm no Linux expert, so I'm really lost here.

  Read the article

• USB ports not working on Xubuntu 12.04 LTS

  - by Zchpyvr

  Basically, my USB ports on my IBM Thinkpad T43 have stopped working most of the time. Sometimes, they mount and appear in Nautilus, but other times, they aren't recognized. The timeline of events on this laptop for the past few months: Started having problems after using a USB port hub. The port would sometimes work but would be fixed with the occasional reboot. Re-partitioned/Expanded my Xubuntu partition (I have a Windows XP/Xubuntu dual boot). Now the majority of the time, the USB fails to recognize devices. In addition, the few times they are recognized, the device may suddenly disconnect. Things I've noticed: The devices still receive power from my computer (I can charge my ipod..etc..) I can't understand dmesg outputs. I don't know if lsusb is telling me anything useful. My dmesg output is here: http://pastebin.com/KdNxHcFC Things start to get weird at the bottom of the file. And my lsusb is: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >