Search Results

Search found 5245 results on 210 pages for 'william hand'.

Page 90/210 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

  - by Glenn

  I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

  Read the article

• Windows 2008 startup script will not run?

  - by larsks

  I am trying to get a very simple batch script to run when my Windows 2008 Server (R2) system starts up. I have added the script to the "Startup Scripts" in the local group policy by running gpedit.msc, and I see the script listed under Windows Settings/Scripts (Startup/Shutdown)/Startup when I run rsop.msc, but the script is not being executed. The "Last Executed" column in rsop is empty even after a reboot, and a file that should be created by the script is never created. At the moment, the entire contents of the script are: rem Check if this script is running. date /t > c:\temp\flag The target directory (c:\temp) exists. The script is called c:\scripts\startup.bat, and works fine if I run it by hand.

  Read the article

• Hopping a VPN Tunnel

  - by lellouch

  My central office and remote offices are connected to each other over site to site ipsec vpn. We use Fortigate firewalls and everything is working fine. On the other hand, only central office is also connected to another company's network over ipsec vpn as well. In this situation, everything is also fine and employees at the central office is able to reach the other company's resources without problem. Now i want the employees working on our remote office can reach the other company's network over central office without creating new vpn tunnels. http://imgur.com/ozrXfGv How can i do that? Thanks for your answers in advance.

  Read the article

• How to recover from locked down XP Home computer

  - by Chris

  We've got a Kiosk machine provided to us by a manufacturer. The video card is flaky, so I want to replace it with another card we have on hand, rather than shipping across the country. The problem is that they have policies in place that locks the system down to a point where only the manufacturers demo works on the computer so I can't install drivers for the newer card. I know pretty much nothing about windows policies or the policy editor. Am I fighting a losing battle trying to replace thi scard?

  Read the article

• Installing Chrome OS on HP Pavilion

  - by Lenny K

  Trying to install Chrome OS on HP Pavillion tx1000. I changed the BIOS to boot from USB before hard drive, and created a bootable USB drive (SanDisk Cruzer 4GB). No matter how many ways I try to make the USB drive, the laptop hangs on the startup screen, and trying to open the Boot Order Options freezes on "Fixed disk 0: ...". On the other hand, without the USB plugged in, the computer continues, and displays "Initialized Mouse", and then onto the Boot Order Options. If you let it boot normally from the beginning, it starts up fine into Windows Vista. I am using Hexxeh's Chrome OS build. Here are the different methods I've tried for making the Bootable USB Drive: Hexxeh's Image Creator (for Mac) Making the USB device bootable (using these directions). I wrote the image using Win32DiskImager. Writing the image using Win32DiskImager (without making it bootable).

  Read the article

• WLC 4400. Get IP

  - by Edward Connelly

  I have three SSID. one is a guest network and I'm having problems with lease times. Its set for web authentication so it passes IPs out even if someone doesn't try and authenticate. Is there a way to get that IP back and not hand another to that mac for a period of time? Poor planning and we didn't allocate enough address space, and we are sandwitched. We could go with another address, but we would have to reconfig lots. since its guest its vlan'd with no access to anthing but the firewalls. would have to change ACLs and routes and interfaces. if it isn't possible we will just have to go that route, just thought there might be an easier solution. session timeout is enabled with 1 hr lease time is set to 4 hrs. no helper DHCP and internal DHCP is set with the space split across three WLCs (60 waps split across those as well).

  Read the article

• Share files - Ubuntu 12.4 and Windows 7 - one network - password not accepted

  - by gotqn

  I have three machines - two with windows 7 and one with Ubuntu 12.4 version. There are in the same network connected by modem. The two machines shares file with no problem, but they can not see the machine with Ubuntu. On the other hand, I am able to see the share files of the windows machines from the Ubuntu's Network. When I select a folder, it wants the network password - I changed it several times in order to be sure that I am entering the correct one but in every case it says that the password is wrong. I have read some topics about files sharing between Linux and windows in which it is said that I should use samba, but is there a more easy way to do this, using the build it options?

  Read the article

• Is the iPad in Europe totally unblocked?

  - by Mike

  One fast question: if I buy an iPad 3G in Europe will it work on other places without jailbreak? I ask this because I heard that, in Europe, iPads are not blocked to any telecom but I am not sure about that. On the other hand I am afraid do buy because I know that their cousins, iphones, are blocked to a specific telecom. Another question is regarding activation. As far as I remembered, my iPhone required me to do an activation step on iTunes and I remember it was also activated (or whatever) on the store (I remembered the salesman connected it to a computer and did some stuff before giving me the device). Is the iPad in europe totally free of operator? totally unblocked? thanks.

  Read the article

• just another apache to nginx rewrite question

  - by Brandon

  I have the following Apache rewrite directives: RewriteCond %{REQUEST_URI} ^/proxy(/|$) [NC] RewriteCond %{QUERY_STRING} (^|&)uri=(.*?)(&|$) [NC] RewriteRule .* /api/vs1.0/%2 [NC,L] And I'm trying out nginx, so trying to move the rewrites over. I came up with... rewrite ^/proxy(/|$) /api/vs1.0/$2 last; rewrite (^|&)uri=(.*?)(&|$) /api/vs1.0/$2 last; Which is probably grossly incorrect. I'm just a mere web developer, so I was wondering if anyone could lend a hand here. I would be much obliged. I see that I am ignoring the query string specification, but I'm thinking that it shouldn't matter. I only have a vague idea of what the original rewrite is accomplishing, so I haven't much hope here in coming up with something decent, despite reading the relevant documentation for both servers.

  Read the article

• Mysterious "media" volume mounted on desktop Mac OS X

  - by Allen

  I have a mysterious volume mounted on my desktop that I can't seem to forcibly unmount. I've tried using umount and also diskutil, but it seems to automatically remount itself. I've copied my hdd with Time Machine, and copied it onto a new computer, and it also has the drive mounted on it. It's not pointing to anything and I can't open it, nor can I forcibily remove it by hand with rm -Rf. Any ideas? I noticed this problem after I upgraded to Mountain Lion from Lion. It causes problems because when I try to select a file using the built in Finder dialog box, it freezes for a few minutes because it tries to cache or read into the "media" mounted volume.

  Read the article

• What is the character used to indent the Make file rule recipe?

  - by goldenmean

  Hi, I am using gnu make and in a Makefile I have, I see below rule. I want to add a similar rule with a recipe, but when I add a rule and its receipe on the next line by giving a tab or space for the recipe, I get make error. dummy : @echo $(OBJS) When i turned on the vim command :set list , i see: dummy :$ ^I@echo $(OBJS)$ What exactly are the characters before the recipe line(second line) which indent it from the start of line? How do I enter them using keyboard (without having to copy paste the exisitng rule and then modifying it? Where would I find information for various spaces/indents to be used in creating a Makefile from beginning, by hand(Not a automake/or other tool created makefile)? thanks, -AD.

  Read the article

• Is Exchange protected from/allow back dated emails?

  - by David

  Does Exchange Server adequately protect against backdating items in a mailbox folder? I want to determine from an auditing perspective what level of risk exists/what trust can be put into Exchange database records. Is there a (mis)feature that allows end point users to modify the sent/recieved date fields on their own messages? Is there a reasonable way short of hand editing the files for an Exchange Server admin to make such a change? And most importantly: Is there any kind of "sequence number" that we could use to audit Exchange records for evidence of date manipulation (ex. msg100 = Dec 15, msg101 = Dec 10, msg102 = Dec 16)

  Read the article

• What does the term 'overinstallation' mean?

  - by Kent Pawar

  I came across this term here: "11882875 -- Essbase Server does not start after an overinstallation." I know that a clean install is a software installation in which any previous version is removed. Googling 'overinstallation' turned up nothing, and I don't like to just assume it simply means 're-install'. UPDATE: So my understanding now is - the term "re-install" can be a bit ambiguous as it could either signify an installation after an uninstallation or otherwise. On the other hand the term "over-installation" specifically talks about installing something over an existing installation, that involved no uninstallations.

  Read the article

• Taking two actions in monit

  - by Oddthinking

  My monit script works to detect an outage with a process and inform me when the rule is: IF DOES NOT EXIST THEN ALERT My monit script works to detect an outage and automatically fix it when the rule is: IF DOES NOT EXIST THEN START But, what I want it to do is inform me AND fix it. Two rules in a row seems to make it ignore all but the last: IF DOES NOT EXIST THEN ALERT IF DOES NOT EXIST THEN START # No alert given. I could use a custom script that does both, and IF DOES NOT EXIST THEN EXEC "my_handwritten_script" but I was trying to move away from a mess of hand-written scripts towards a clean Monit configuration. Can I configure Monit to take two actions?

  Read the article

• Picasa 3 - All 88 'people' folders are empty - can I restore the files?

  - by rogerbid

  My wife uses Picasa 3 on her laptop, and has a problem. She has no idea how it happened but somehow the left hand panel in the Picasa 3 window shows "People (88)" but listed below it are the 88 names each with "(0)" alongside. No thumbnails show up for any of the 'people'. I have looked through all the menus and can see nothing that seems relevant and a search on this website has been fruitless too. Can anyone please tell me how I can correct this situation? FYI I backed up the laptop to a portable hard drive a few days ago (using Windows Backup and Restore) and wonder if this can be used to restore the database.

  Read the article

• Maintaining a set of (virtual) windows XP machines

  - by Frank Meulenaar

  I have a small set (currently 3, going to 6, not going to be more than 10) of (virtual, vmware workstation) windows XP machine's. They are similar but not exactly the same. I'm currently rolling out windows updates etc by hand: start machine 1, update, close, etc; I'd like to review the updates first before the clients can install them. Incidentally there are also other updates to be performed: changes some files on all machines, install new Java versions, etc. What's a good way of doing this automatic? I tried to search for this but things like Active Directory seem overkill to me.

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• Backup all plesk MySQL Databases to individual files

  - by Michael

  Hy, Because I'm new to shell scripting I need a hand. I currently backup all mydatabases to a single file, thing that makes the restore preaty hard. The second problem that my MySQL password dosen't work because of a Plesk bug and i get the password from "/etc/psa/.psa.shadow". Here is the code that I use to backup all my databases to a single file. mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` --all-databases | bzip2 -c > /root/21.10.2013.sql.bz2 I found some scripts on the web that backup each database to individual files but I don't know how to make them work for my situation. Here is a example script: for db in $(mysql -e 'show databases' -s --skip-column-names); do mysqldump $db | gzip > "/backups/mysqldump-$(hostname)-$db-$(date +%Y-%m-%d-%H.%M.%S).gz"; done Can someone help me make the script above work for my situation? Requirements: Backup each database to individual file using plesk password location.

  Read the article

• Ubuntu Linux -- create custom burnable/bootable DVD image?

  - by ashgromnies

  I recently developed some kiosk software that runs on Ubuntu Linux, and my client needs me to set up ten more computers with the complete software package(and that number will only grow in the future). So I'm looking for a way to make this less of a pain in the neck and prevent me from shooting myself in the foot -- I had to disable some things on the installations of the operating systems like screensavers, automatic updates, etc. that would pop up and disrupt the kiosk operation. I don't feel comfortable doing that by hand across 10 computers, it seems stupid. Does anybody have recommendations for software that would let me burn an installable DVD with a complete image of the hard drive from one of the devices? I've looked at Clonezilla, G4L, and PartImage and I'm still not quite sure if any of them offer what I need. I know PartImage for sure won't work, because it doesn't support Ext4.

  Read the article

• How can I cut a line in TextWrangler?

  - by Ian Henry

  Trying out TextWrangler since my TextMate trial is about to expire and I'm not sure it's worth the cash to keep using it. The main thing I'm missing is the ability to cut the entire line that the cursor is on without having to select it (which I could accomplish through a TextMate macro). Yeah, I can hit ?L ?X, but I'd like to map this sequence to ^X so I can do it purely with my left hand. Seems like this should be easy, but it's beyond me. What's the best way to get this functionality?

  Read the article

• Splitting an archive on multiple media

  - by Robert Munteanu

  I'm generating archives which are larger than my current physical media ( DVD ). I'd like to split those archives: automatically - instead of generating mini-archives by hand; consistently - so that an archive can be extracted independently of another. For instance for a tree of 24GB which would be archived into 10GB I would get 3 archives, all of them < 4.7 GB and each of them being able to be extracted without the other 2. I'm using dirvish so I'm archiving a filesystem tree. Update: I'm using Linux.

  Read the article

• Remap Copy and Paste shortcuts on a Mac

  - by Linzdp

  I use Windows at work and a Mac at home. One of the biggest issues is the difference between the copy paste shortcuts on Windows vs the Mac i.e. Ctrl + C & Ctrl + V on Windows and on the Mac its Command + C and Command + V. Invariably its hard because of learnt motor skills where my hand always shapes itself to the Windows Ctrl + C configuration(I have been using Windows longer) I would like to remap the Copy and Paste to the Fn + C and Fn + V on the Mac. Why? Because the Fn key is actually the key that corresponds to where the Ctrl key is on Windows keyboards and since its the last edge key its easy to find. I have tried Double Command but it doesn't seem to have an option of turning Fn to the Command key.

  Read the article

• Documenting software-updates semi-automatically in MacOS X by parsing log files?

  - by Martin

  I'd like to document changes I made to my computer (running MacOS 10.6.8) to be able to identify the sources of eventual problems. Mostly I install updates when a software notifies me about a newer version and offers me a dialog to download and install the update. Currently I'm documenting those updates "by hand" by noting in a text file, when I have e. g. installed a Flash-Player update or updated another 3rd party software ... I wonder if I could achieve that easier and semi-automatically by parsing system logfiles for certain texts like "install" and that way directly get the relevant information: what has been installed (Software and version) when has been installed where has it been installed/what has changed Is there a way to extract such information by a script from the existing logfiles?

  Read the article

• How do I securely buy a domain from a private party?

  - by Matt

  I have a domain I want. I found the owners contact information, and negotiated a price. Is there a domain brokerage service out there that would help me with the exchange. I don't want to send off money, and never hear from him again, and I'm sure it's likewise. I've found a lot of sites that carry collections of domains for sale, but I've already found mine, and contacted the owner. I just want a service to facilitate the hand-off. Has anyone used a service like this that they could recommend?

  Read the article

• When should .local be used?

  - by hydroparadise

  So, I've set up a few Win Servs in my time and always did the .local thing when there was a router that sepearated my internal from external networks. Now that I'm setting up an *nix box for the first time, does this concept still apply? Do I still want my FQDNs (/etc/hostname) to show .local or .com for all my machines (mixed: linux servers, win workstations) inside of my network. This question comes in context of always having Active Directory hold my hand every step of the way, where now I'm setting up an DNS machine manually.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >