Search Results

Search found 26285 results on 1052 pages for 'grant back'.

Page 900/1052 | < Previous Page | 896 897 898 899 900 901 902 903 904 905 906 907  | Next Page >

• Tool to migrate a repo with only read access?

  - by Corazu

  I have a subversion repository located on our school servers from a project my friends and I worked on the past semester. We want to take the project and polish it and make it more of a portfolio item and I'm not quite sure that the repo will stay intact on the school servers (they usually wipe it after a few semesters). I don't have access to dump the repo, although I've sent an email to see if I can get one - which would be the best solution. I tried svnsync but the school server doesn't support the replay command (probably turned off), so that won't work for me. Now, theoretically, wouldn't it be possible to (manually or programmatically) checkout each revision of the repository and check it in to a new repository on our own server? I think it would work - there's only 3 of us, and there's no working copy conflicts that we'd have to worry about, just want a copy of all the history in the repo in case we need to go back and look at it. That being said, before I go and reinvent a wheel by writing a script to do it - does something like this already exist? I have to figure there's already a tool to do it, or that someone has wrote a script to do it.

  Read the article

• Being pressured to GOTO the dark-side

  - by Dan McG

  We have a situation at work where developers working on a legacy (core) system are being pressured into using GOTO statements when adding new features into existing code that is already infected with spagetti code. Now, I understand there may be arguments for using 'just one little GOTO' instead of spending the time on refactoring to a more maintainable solution. The issue is, this isolated 'just one little GOTO' isn't so isolated. At least once every week or so there is a new 'one little GOTO' to add. This codebase is already a horror to work with due to code dating back to or before 1984 being riddled with GOTOs that would make many Pastafarians believe it was inspired by the Flying Spagetti Monster itself. Unfortunately the language this is written in doesn't have any ready made refactoring tools, so it makes it harder to push the 'Refactor to increase productivity later' because short-term wins are the only wins paid attention to here... Has anyone else experienced this issue whereby everybody agrees that we cannot be adding new GOTOs to jump 2000 lines to a random section, but continually have Anaylsts insist on doing it just this one time and having management approve it? tldr; How can one go about addressing the issue of developers being pressured (forced) to continually add GOTO statements (by add, I mean add to jump to random sections many lines away) because it 'gets that feature in quicker'? I'm beginning to fear we may loses valuable developers to the raptors over this...

  Read the article

• MSMQ - Message Queue Abstraction and Pattern

  - by Maxim Gershkovich

  Hi All, Let me define the problem first and why a messagequeue has been chosen. I have a datalayer that will be transactional and EXTREMELY insert heavy and rather then attempt to deal with these issues when they occur I am hoping to implement my application from the ground up with this in mind. I have decided to tackle this problem by using the Microsoft Message Queue and perform inserts as time permits asynchronously. However I quickly ran into a problem. Certain inserts that I perform may need to be recalled (ie: retrieved) immediately (imagine this is for POS system and what happens if you need to recall the last transaction - one that still hasn’t been inserted). The way I decided to tackle this problem is by abstracting the MessageQueue and combining it in my data access layer thereby creating the illusion of a single set of data being returned to the user of the datalayer (I have considered the other issues that occur in such a scenario (ie: essentially dirty reads and such) and have concluded for my purposes I can control these issues). However this is where things get a little nasty... I’ve worked out how to get the messages back and such (trivial enough problem) but where I am stuck is; how do I create a generic (or at least somewhat generic) way of querying my message queue? One where I can minimize the duplication between the SQL queries and MessageQueue queries. I have considered using LINQ (but have very limited understanding of the technology) and have also attempted an implementation with Predicates which so far is pretty smelly. Are there any patterns for such a problem that I can utilize? Am I going about this the wrong way? Does anyone have an of their own ideas about how I can tackle this problem? Does anyone even understand what I am talking about? :-) Any and ALL input would be highly appreciated and seriously considered… Thanks again.

  Read the article

• How do I get 2-way data binding to work for nested asp.net Repeater controls

  - by jimblanchard

  I have the following (trimmed) markup: <asp:Repeater ID="CostCategoryRepeater" runat="server"> <ItemTemplate> <div class="costCategory"> <asp:Repeater ID="CostRepeater" runat="server" DataSource='<%# Eval("Costs")%>'> <ItemTemplate> <tr class="oddCostRows"> <td class="costItemTextRight"><span><%# Eval("Variance", "{0:c0}")%></span></td> <td class="costItemTextRight"><input id="SupplementAmount" class="costEntryRight" type="text" value='<%# Bind("SupplementAmount")%>' runat="server" /></td> </tr> </ItemTemplate> </asp:Repeater> </div> </ItemTemplate> </asp:Repeater> The outer repeater's DataSource is set in the code-beside. I've snipped them, but there are Eval statements that wire up to the properties in the outer Repeater. Anyway, one of the fields in the inner Repeater needs to be a Bind instead of an Eval, as I want to get the values that the user types in. The SupplementAmount input element correctly receives it's value when the page loads, but on the other side, when I inspect the contents of the Costs List when the form posts back, the changes the user made aren't present. Thanks.

  Read the article

• Controller actions appear to be synchronous though on different requests?

  - by Oded

  I am under the impression that the below code should work asynchronously. However, when I am looking at firebug, I see the requests fired asynchronously, but the results coming back synchronously: Controller: [HandleError] public class HomeController : Controller { public ActionResult Status() { return Content(Session["status"].ToString()); } public ActionResult CreateSite() { Session["status"] += "Starting new site creation"; Thread.Sleep(20000); // Simulate long running task Session["status"] += "<br />New site creation complete"; return Content(string.Empty); } } Javascript/jQuery: $(document).ready(function () { $.ajax({ url: '/home/CreateSite', async: true, success: function () { mynamespace.done = true; } }); setTimeout(mynamespace.getStatus, 2000); }); var mynamespace = { counter: 0, done: false, getStatus: function () { $('#console').append('.'); if (mynamespace.counter == 4) { mynamespace.counter = 0; $.ajax({ url: '/home/Status', success: function (data) { $('#console').html(data); } }); } if (!mynamespace.done) { mynamespace.counter++; setTimeout(mynamespace.getStatus, 500); } } } Addtional information: IIS 7.0 Windows 2008 R2 Server Running in a VMWare virutual machine Can anyone explain this? Shouldn't the Status action be returning practically immediately instead of waiting for CreateSite to finish? Edit: How can I get the long running process to kick off and still get status updates?

  Read the article

• Small Open source and free java applications

  - by user1089770

  I am a Perl Developer who has just stepped into the Java world and I want to be very proficient in Java EE development. However, I have found that, being a Perl guy, I have very high MTI(Mother Tongue Influence). Indians will know what MTI is. For others, it can be defined as an influence of your "main" language whenever you "speak" your new language. In other words, our mind converts/translates what we want to "say" in the new language based on the "main" language, which can be quite absurd or meaning less in the "new" language. Coming back to the point, as a result of this MTI, many lines of my code has this Perl influence and it is absurd and useless for production. Hence, I'd like to see or better do some research on existing small to medium open source java applications, so that I will know how I can "speak" in the native way of the "new" language. Some examples in PHP will be : WordPress, Zend etc. So I'd really appreciate if you guys could suggest any such apps. Apps that have a great commercial value are highly preferred

  Read the article

• NHibernate will not insert a record

  - by Brian Beckham

  I have an application that is now 4+ years old that is exhibiting some odd behavior on our latest deployment. The application uses nHibernate for all inserts / updates / selects, etc. We are currently using .NET 2.0, and nHibernate 1.2 (I know, we need to upgrade) This deployment is on Windows 2008 Server x64, IIS 7.5 - what I have seen so far is that the application runs, but is unable to insert or update records in the DB - reads seem fine so far, but writes are a problem. SOME writes actually work, inserts into some small tables, but most never even make it to the DB. Using SQL Profiler, the insert / updates never make it to the server, and turning log4net up to DEBUG, and show_sql true - the select statements appear, but the insert / update statements never make it into the log at all, and never show up at the server. What's even more odd is that the application seems to be oblivious to this - the commandandclose runs without exception (open session in view with an httpmodule), the domain objects come back with uuid's generated, etc. but never get persisted. Certainly an upgrade is due, but I would hate to try it during a deployment, and without time to accurately test the app. Any ideas?

  Read the article

• using yield in C# like I would in Ruby

  - by Sarah Vessels

  Besides just using yield for iterators in Ruby, I also use it to pass control briefly back to the caller before resuming control in the called method. What I want to do in C# is similar. In a test class, I want to get a connection instance, create another variable instance that uses that connection, then pass the variable to the calling method so it can be fiddled with. I then want control to return to the called method so that the connection can be disposed. I guess I'm wanting a block/closure like in Ruby. Here's the general idea: private static MyThing getThing() { using (var connection = new Connection()) { yield return new MyThing(connection); } } [TestMethod] public void MyTest1() { // call getThing(), use yielded MyThing, control returns to getThing() // for disposal } [TestMethod] public void MyTest2() { // call getThing(), use yielded MyThing, control returns to getThing() // for disposal } ... This doesn't work in C#; ReSharper tells me that the body of getThing cannot be an iterator block because MyThing is not an iterator interface type. That's definitely true, but I don't want to iterate through some list. I'm guessing I shouldn't use yield if I'm not working with iterators. Any idea how I can achieve this block/closure thing in C# so I don't have to wrap my code in MyTest1, MyTest2, ... with the code in getThing()'s body?

  Read the article

• when to clear or make null asp .net mvc models?

  - by SARAVAN

  HI, I am working in an asp .net mvc application. I am using the model and storing some of the values which i need to preserve between the page posts, in the form of datacontexts. Say my model looks something like this: public SelectedUser SelectedUserDetails { //get and set has //this.datacontext.data.SelectedUser = ..... //return this.datacontext.data..... } Now when this model needs to be cleared? I have many such models with many properties and datacontext. But I don't have an idea on when to clear it. Is there a way or an event that can be triggered automatically when the model is not used for a long time? Oneway I thought is when i navigate away from a page which uses my underlying model, I can clear that model if its no longer used anywhere and initialise it back as needed. But I need to clear almost many models at many points. Is there an automatic way that can clear models when it is no longer used beacuse care can be taken by my code to initialise them when I need them, but I don't know when to clear them when I no longer need them. I need this to get rid of any memory related issues. Any thoughts or comments?

  Read the article

• Keep the images downloaded in the listview during scrolling

  - by Paveliko

  I'm developing my first app and have been reading a LOT here. I've been trying to find a solution for the following issue for over a week with no luck. I have an Adapter that extends ArrayAdapter to show image and 3 lines of text in each row. Inside the getView I assign relevant information for the TextViews and use ImageLoader class to download image and assign it to the ImageView. Everything works great! I have 4.5 rows visible on my screen (out of total of 20). When I scroll down for the first time the images continue to download and be assigned in right order to the list. BUT when I scroll back the list looses all the images and start redrawing them again (0.5-1 sec per image) in correct order. From what I've been reading it's the standard list performance but I want to change it. I want that, once the image was downloaded, it will be "sticked" to the list for the whole session of the current window. Just like in Contacts list or in the Market. It is only 20 images (6-9kb each). Hope I managed to explain myself.

  Read the article

• Updating database row from model

  - by Jamie Dixon

  Hey everyone, I'm haing a few problems updating a row in my database using Linq2Sql. Inside of my model I have two methods for updating and saving from my controller, which in turn receives an updated model from my view. My model methods like like: public void Update(Activity activity) { _db.Activities.InsertOnSubmit(activity); } public void Save() { _db.SubmitChanges(); } and the code in my Controller likes like: [HttpPost] public ActionResult Edit(Activity activity) { if (ModelState.IsValid) { UpdateModel<Activity>(activity); _activitiesModel.Update(activity); _activitiesModel.Save(); } return View(activity); } The problem I'm having is that this code inserts a new entry into the database, even though the model item i'm inserting-on-submit contains a primary key field. I've also tried re-attaching the model object back to the data source but this throws an error because the item already exists. Any pointers in the right direction will be greatly appreciated. UPDATE: I'm using dependancy injection to instantiate my datacontext object as follows: IMyDataContext _db; public ActivitiesModel(IMyDataContext db) { _db = db; }

  Read the article

• NSOutlineView not redrawing

  - by Septih

  Hello, I have an NSOutlineView with checkboxes. I have the checkbox state bound to a node item with the key shouldBeCopied. In the node item I have the getters and setters like so: -(BOOL)shouldBeCopied { if([[self parent] shouldBeCopied]) return YES; return shouldBeCopied; } -(void)setShouldBeCopied:(BOOL)value { shouldBeCopied = value; if(value && [[self children] count] > 0) [[self delegate] reloadData]; } The idea here is that if the parent is checked, so should the children. The problem I'm having is that when I check the parent, it does not update that view of the children if they are already expanded. I can understand that it should not be updated by the bindings because i'm not actually changing the value. But should reloadData not cause the bindings to re-get the value, thus calling -shouldBeCopied for the children? I have tried a few other things such as -setNeedsDisplay and -reloadItem:nil reloadChildren:YES but none work. I've noticed that the display gets refreshed when I swap to xcode and then back again and that's all I want, so how do I get it to behave that way?

  Read the article

• C++ socket protocol design issue (ring inclusion)

  - by Martin Lauridsen

  So I have these two classes, mpqs_client and client_protocol. The mpqs_client class handles a Boost socket connection to a server (sending and receiving messages with some specific format. Upon receiving a message, it calls a static method, parse_message(..), in the class client_protocol, and this method should analyse the message received and perform some corresponding action. Given some specific input, the parse_message method needs to send some data back to the server. As mentioned, this happens through the class mpqs_client. So I could, from mpqs_client, pass "this" to parse_message(..) in client_protocol. However, this leads to a two-way association relationship between the two classes. Something which I reckon is not desireable. Also, to implement this, I would need to include the other in each one, and this gives me a terrible pain. I am thinking this is more of a design issue. What is the best solution here? Code is posted below. Class mpqs_client: #include "mpqs_client.h" mpqs_client::mpqs_client(boost::asio::io_service& io_service, tcp::resolver::iterator endpoint_iterator) : io_service_(io_service), socket_(io_service) { ... } ... void mpqs_client::write(const network_message& msg) { io_service_.post(boost::bind(&mpqs_client::do_write, this, msg)); } Class client_protocol: #include "../network_message.hpp" #include "../protocol_consts.h" class client_protocol { public: static void parse_message(network_message& msg, mpqs_sieve **instance_, mpqs_client &client_) { ... switch (type) { case MPQS_DATA: ... break; case POLYNOMIAL_DATA: ... break; default: break; } }

  Read the article

• Question about array subscripting in C#

  - by Michael J

  Back in the old days of C, one could use array subscripting to address storage in very useful ways. For example, one could declare an array as such. This array represents an EEPROM image with 8 bit words. BYTE eepromImage[1024] = { ... }; And later refer to that array as if it were really multi-dimensional storage BYTE mpuImage[2][512] = eepromImage; I'm sure I have the syntax wrong, but I hope you get the idea. Anyway, this projected a two dimension image of what is really single dimensional storage. The two dimensional projection represents the EEPROM image when loaded into the memory of an MPU with 16 bit words. In C one could reference the storage multi-dimensionaly and change values and the changed values would show up in the real (single dimension) storage almost as if by magic. Is it possible to do this same thing using C#? Our current solution uses multiple arrays and event handlers to keep things synchronized. This kind of works but it is additional complexity that we would like to avoid if there is a better way.

  Read the article

• Scalability 101: How can I design a scalable web application using PHP?

  - by Legend

  I am building a web-application and have a couple of quick questions. From what I learnt, one should not worry about scalability when initially building the app and should only start worrying when the traffic increases. However, this being my first web-application, I am not quite sure if I should take an approach where I design things in an ad-hoc manner and later "fix" them. I have been reading stories about how people start off with an app that gets millions of users in a week or two. Not that I will face the same situation but I can't help but wonder, how do these people do it? Currently, I bought a shared hosting account on Lunarpages and that got me started in building and testing the application. However, I am interested in learning how to build the same application in a scalable-manner using the cloud, for instance, Amazon's EC2. From my understanding, I can see a couple of components: There is a load balancer that first receives requests and then decides where to route each request This request is then handled by a server replica that then processes the request and updates (if required) the database and sends back the response to the client If a similar request comes in, then a caching mechanism like memcached kicks into picture and returns objects from the cache A blackbox that handles database replication Specifically, I am trying to do the following: Setting up a load balancer (my homework revealed that HAProxy is one such load balancer) Setting up replication so that databases can be synchronized Using memcached Configuring Apache to work with multiple web servers Partitioning application to use Amazon EC2 and Amazon S3 (my application is something that will need great deal of storage) Finally, how can I avoid burning myself when using Amazon services? Because this is just a learning phase, I can probably do with 2-3 servers with a simple load balancer and replication but until I want to avoid paying loads of money accidentally. I am able to find resources on individual topics but am unable to find something that starts off from the big picture. Can someone please help me get started?

  Read the article

• Rails: Can't set or update tag_list using a text field with acts_as_taggable_on

  - by Josh

  Hey everyone, I'm trying to add tagging to a rails photo gallery system I'm working on. It works from the back-end, but if I try to set or change it in the form view, it doesn't work. I added acts_as_taggable to the photo model and did the migrations. My gallery builder is programmed to add one tag automatically to each photo it creates. This works fine, just as if it were setting it for the console. However, I can't seem to set tags using a text_field in the photo form. Here's the code I added to my photo form: <p> <%= f.label :tag_list %><br /> <%= f.text_field :tag_list %> </p> Now, that's pretty trivial, and since :tag_list supports single-string comma-separated assignment (e.g. tag_list = "this, that, the other" #= ['this', 'that', 'the other']), I don't see why using a text field doesn't work. And to make even less sense, if a tag list has already been populated, the list will still show up in the text field when editing the photo. I just can't seem to commit any changes to the list. The documentation on their github page doesn't appear to give any information on how to set these values from the view. Any ideas? Oh, and I'm using the Rails 3 gem version.

  Read the article

• How do I Order on common attribute of two models in the DB?

  - by Will

  If i have two tables Books, CDs with corresponding models. I want to display to the user a list of books and CDs. I also want to be able to sort this list on common attributes (release date, genre, price, etc.). I also have basic filtering on the common attributes. The list will be large so I will be using pagination in manage the load. items = [] items << CD.all(:limit => 20, :page => params[:page], :order => "genre ASC") items << Book.all(:limit => 20, :page => params[:page], :order => "genre ASC") re_sort(items,"genre ASC") Right now I am doing two queries concatenating them and then sorting them. This is very inefficient. Also this breaks down when I use paging and filtering. If I am on page 2 of how do I know what page of each table individual table I am really on? There is no way to determine this information without getting all items from each table. I have though that if I create a new Class called items that has a one to one relationship with either a Book or CD and do something like Item.all(:limit => 20, :page => params[:page], :include => [:books, :cds], :order => "genre ASC") However this gives back an ambiguous error. So can only be refined as Item.all(:limit => 20, :page => params[:page], :include => [:books, :cds], :order => "books.genre ASC") And does not interleave the books and CDs in a way that I want. Any suggestions.

  Read the article

• What's the correct way to pass parameters from VBScript to COM interface implemented in C#?

  - by nopopem

  I'm trying to expose a fairly simple C# class to COM which should be usable from VBScript (among others). Some objects need to be created via COM calls and will be used in furter calls later on. The definition of the exposed classes and interfaces looks like this: namespace Test { [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)] public interface IComInterface { IFoo CreateFoo(); void UseFoo(int x, IFoo f); } [ClassInterface(ClassInterfaceType.None)] public sealed class CComInterface : IComInterface { public CComInterface() {} public IFoo CreateFoo() { return new Foo(); } public void UseFoo(int x, IFoo f) { f.Bar(); } } [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)] public interface IFoo { void Bar(); } [ClassInterface(ClassInterfaceType.None)] public class Foo : IFoo { internal Foo() {} public void Bar() {} } } The simplest thinkable COM client in VBScript does this: Dim ci Set ci = WScript.CreateObject("Test.CComInterface") Dim foo Set foo = ci.CreateFoo foo.Bar ci.UseFoo 0, foo While the call to Bar succeeds, calling UseFoo fails with "Error 5: invalid procedure call or invalid argument" The generated IDL seems ok to me: dispinterface IComInterface { properties: methods: [id(0x60020003)] IFoo* CreateFoo(); [id(0x60020004)] void UseFoo( [in] long x, [in] IFoo* f); }; The vbs call succeeds when I wrap the second parameter in parentheses like this: ci.UseFoo 0, (foo) As far as I understand (I'm no VBScript expert however) this forces the reference to foo to be passed by value, i.e. a copy of the reference is being made. How can I change the interface so that it can be called with the foo reference directly? Since this will be a public interface used by customers I don't like the idea of having to explain why all the objects created need to be passed back in an extra pair of parentheses...

  Read the article

• Should a C++ constructor do real work?

  - by Wade Williams

  I'm strugging with some advice I have in the back of my mind but for which I can't remember the reasoning. I seem to remember at some point reading some advice (can't remember the source) that C++ constructors should not do real work. Rather, they should initialize variables only. The advice when on to explain that real work should be done in some sort of init() method, to be called separately after the instance was created. The situation is I have a class that represents a hardware device. It makes logical sense to me for the constructor to call the routines that query the device in order to build up the instance variables that describe the device. In other words, once new instantiates the object, the developer receives an object which is ready to be used, no separate call to object-init() required. Is there a good reason why constructors shouldn't do real work? Obviously it could slow allocation time, but that wouldn't be any different if calling a separate method immediately after allocation. Just trying to figure out what gotchas I not currently considering that might have lead to such advice.

  Read the article

• Why my http POST request doesn't go well?

  - by 0x90

  I am trying to make this POST request in ruby. but get back #<Net::HTTPUnsupportedMediaType:0x007f94d396bb98> what I tried is: require 'rubygems' require 'net/http' require 'uri' require 'json' auto_index_nodes =URI('http://localhost:7474/db/data/index/node/') request_nodes = Net::HTTP::Post.new(auto_index_nodes.request_uri) http = Net::HTTP.new(auto_index_nodes.host, auto_index_nodes.port) request_nodes.add_field("Accept", "application/json") request_nodes.set_form_data({"name"=>"node_auto_index", "config" => { "type" => "fulltext", "provider" =>"lucene"} , "Content-Type" => "application/json" }) response = http.request(request_nodes) Tried to write this part: "config" => { "type" => "fulltext", provider" =>"lucene"} , "Content-Type" => "application/json" } like that: "config" => '{ "type" => "fulltext",\ "provider" =>"lucene"},\ "Content-Type" => "application/json"\ }' this try didn't help either: request_nodes.set_form_data({"name"=>"node_auto_index", "config" => '{ \ "type" : "fulltext",\ "provider" : "lucene"}' , "Content-Type" => "application/json" })

  Read the article

• Any suggestions to improve my PDO connection class?

  - by Scarface

  Hey guys I am pretty new to pdo so I basically just put together a simple connection class using information out of the introductory book I was reading but is this connection efficient? If anyone has any informative suggestions, I would really appreciate it. class PDOConnectionFactory{ public $con = null; // swich database? public $dbType = "mysql"; // connection parameters public $host = "localhost"; public $user = "user"; public $senha = "password"; public $db = "database"; public $persistent = false; // new PDOConnectionFactory( true ) <--- persistent connection // new PDOConnectionFactory() <--- no persistent connection public function PDOConnectionFactory( $persistent=false ){ // it verifies the persistence of the connection if( $persistent != false){ $this->persistent = true; } } public function getConnection(){ try{ $this->con = new PDO($this->dbType.":host=".$this->host.";dbname=".$this->db, $this->user, $this->senha, array( PDO::ATTR_PERSISTENT => $this->persistent ) ); // carried through successfully, it returns connected return $this->con; // in case that an error occurs, it returns the error; }catch ( PDOException $ex ){ echo "We are currently experiencing technical difficulties. We have a bunch of monkies working really hard to fix the problem. Check back soon: ".$ex->getMessage(); } } // close connection public function Close(){ if( $this->con != null ) $this->con = null; } }

  Read the article

• Handling row selection from a simple grid using jquery and asp.net mvc

  - by Jonn

  Using a simple table and jquery, how would you manually handle selection using jquery? So far, I've managed to add a gridrowselected class on the tr when the click event is called so that I'll know which row is currently selected. But I don't know how to pass the selected data back to the controller (or at least an index I placed on the row). I tried something like this $(function() { $('#ProjectList .gridrow').click(function() { // Get row's index var projectId = $(this).find('input[name$=ProjectId]').val(); // Remove the input if it already exists var parentForm = $(this).parents('form'); parentForm.remove('input[name="selectedRows"][value="' + projectId + '"]'); // If it is selected, create the form. If it's not selected then the input just gets removed (the user must have clicked on it and deselected the row) if ($(this).hasClass('gridrow-selected') === true) { parentForm.append($('<input>', { type: "hidden", name: "selectedRows", value: projectId })); } }); }); which I'm expecting to create a hidden input so that when I post, selectedRows gets passed onto the controller. But all it does is create the input, but the data still doesn't get passed to the controller.

  Read the article

• Given the Following List (UL), how can it be serialized and sent to the Database

  - by nobosh

  I have the follow structure which is created with a nested sortable: <UL id="container"> <LI id="main1"> <input type="checkbox" /> Lorem ipsum dolor sit amet, consectetur <UL> <LI id="child2"> <input type="checkbox" /> In hac habitasse platea dictumst. <UL></UL> </LI> </UL> </LI> <LI id="main3"> <input type="checkbox" /> In hac habitasse platea dictumst. <UL></UL> </LI> <LI id="main4"> <input type="checkbox" /> In hac habitasse platea dictumst. <UL></UL> </LI> <LI id="main5"> <input type="checkbox" /> In hac habitasse platea dictumst. <UL></UL> </LI> </UL> Where I'm stuck is how to send this back to the database. I"m guessing that it needs to be serialized, does that sound right to? so that is looks something like: item[]=main1&item[]=221&item_221[]=21&item_221[]=2&item_221[]=211&item[]=22 I'm a little lost at this point and appreciate any tips to move me in the right direction. Thanks, B

  Read the article

• Over Optimistic Daily Productivity

  - by Dan Revell

  I'm a junior developer and have been working since I graduated last summer so coming up to a year now. I have this issue that is starting to get to me. Every night I think back to what I did that day, feel bad that I didn't get as much done as I would have liked and then tick off in my head all the things I'll get done the following day. Come the end of the following day I end haven't gotten through half of what I wanted to. This over optimism that I'm suffering from. Might it be just because I'm relatively new to the profession and aren't aware of how long things will actually take me. The work might be quick to think through in my head but all sorts of time sync's involved can bleed away the hours. If not that then perhaps it's the technology stack that I'm working on. SharePoint isn't the easiest thing to develop for and it's certainly something I came into not knowing a whole lot about. If it's because I'm not yet skilled enough to predict how long things will take me, is this trait of over optimistic predictions universal to the profession? I'd appreciate any input from those experienced with working with younger developers and those that might have suffered from this themselves. [EDIT] Perhaps I worded the question badly. I'm interested in just general day to day work rather than overall project completion estimation.

  Read the article

• Returning JSON from JavaScript to Python

  - by Chris Lacy

  I'm writing a simple App Engine app. I have a simple page that allows a user to move a marker on a Google map instance. Each time the user drops the marker, I want to return the long/lat to my Python app. function initialize() { ... // Init map var marker = new GMarker(center, {draggable: true}); GEvent.addListener(marker, "dragend", function() { // I want to return the marker.x/y to my app when this function is called .. }); } To my (admittedly limited) knowledge, I should be: 1). Returning a JSON structure with my required data in the listener callback above 2). In my webapp.RequestHandler Handler class, trying to retrieve the JSON structure during the post method. I would very much like to pass this JSOn data back to the app without causing a page reload (which is what has happened when I've used various post/form.submit methods so far). Can anyone provide me with some psuedo code or an example on how I might achieve what I'm after? Thanks.

  Read the article

< Previous Page | 896 897 898 899 900 901 902 903 904 905 906 907  | Next Page >