Search Results

Search found 28828 results on 1154 pages for 'i heart ubuntu'.

Page 908/1154 | < Previous Page | 904 905 906 907 908 909 910 911 912 913 914 915  | Next Page >

• X won't start, root filesystem mounted read only

  - by TK Kocheran

  I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

  Read the article

• How to debug a fatal system crash - [graphical loop DOTA2]?

  - by Huw

  Whilst playing DOTA2, I occasionally and apparently randomly seem to be experiencing a fatal crash where the display freezes fixed and the audio loops over approx the last .5 of a second. Now, I'm interested in resolving this - but my trouble is I don't know where to start. The error appears non-reproducible (I've tried returning to games and deploying the same combination of events in hopes of pinning to to a certain shader etc), and I don't know which part of 'the stack' it might be coming from. Variables that occur to me: I custom build this system, did I do something wrong - is my PSU not providing enough power to the graphics card? I am running Steam and DOTA under Linux, could this new software have a bug Might it be something to do with my ATI Catalyst graphics drivers Is some other background process interfering I'm usually mid game when this occurs, so i quickly kill the power and reboot (when i'm lucky i can get back in with only 1-2 mins lost!). So my question here relates to logs. Where should I start to look or how might I set up logs to help me pin down a fatal crash of this kind by recording moments up to / before a crash and is this likely to be something I should push Steam to do, or is there something at a system level? Then perhaps I can return with a more specific question and perhaps even a bug report :) Many thanks in advance.

  Read the article

• Compiz Error After Emerald Install

  - by KoopaTroopa

  Salutations! So, once again, I fell to the allure of the window decorator emerald. Where, just like the first time around, (I know I know) upon attempting to back out of emerald to the safety of compiz I'm faced with a problem. Seemingly after several minutes or after opening Chrome any window that isn't maximised has it's borders removed (so there's no close, minimise and maximise etc buttons). I can get them breifly back if I reload compiz via fusion-icon. After a brief chat on IRC it appears compiz is crashing. Here's a pastebin log of me running compiz via terminal. http://pastebin.com/sK65v4Fi I forgot my two vows of 'Never bother using Windows applications via wine or a VM' and 'Thou shalt never not use compiz'. ***GTK-Window-Decorator log gtk-window-decorator (gtk-window-decorator:11027): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", Segmentation fault ** also posted on ubuntuforums to widen my scope of help.

  Read the article

• How do I select a field/column from the output of `ls -l`?

  - by soandos

  My goal is deceptively simple (at least to me). I wish to take the output of ls -l or ls -lh and select just one field. I am looking for this to be as bulletproof as possible, by which I mean, assume that filenames can have a variable number of spaces, not everything in the field has the same length, etc. Bonus points for having a script that will take the name of the the field (or even just a field number), and then return the contents of the field. I want to turn into:

  Read the article

• Converting Celsius Processor Temperature to Fahrenheit

  - by WindowsEscapist

  I'm editing a Conky theme. I would like it to output the processor temperatures in degrees Fahrenheit instead of Celsius. In the ~/.conkyrc file, the command sensors | grep 'Core 0' | cut -c18-19 is used to find the temperature in Celsius for the first processor core. I want to use bc to compute this (give it outputvalue*9/5+32). Problem is, bc wants just absolute values, and I see no way to pass it program output. If I try to use something like temp=$(sensors | grep 'Core 0' | cut -c18-19) & echo 'temp*9/5+32' | bc, it ends up giving me 32 because it registers "temp" as a 0.

  Read the article

• How to add a daemon to a quickly project

  - by darkrex1986

  Currently I'm developing an application with quickly which is divided in two parts: A graphical UI where the user could configure some things, and a daemon which do the most work in the background. I started with the UI, to create some windows for settings and so on. Now I want to start coding the daemon, but I have no clue how to implement the daemon in my quickly project. Could I simply paste the files of the daemon in project folder or is there an implementation method for adding new files to a quickly project? Or do I have to create a new project and merge them together?

  Read the article

• How do I "alt-tab" between windows using Gnome 3?

  - by josmh

  All of the references I've found for Gnome 3 keyboard shortcuts list that alt+tab switches between applications and alt+` switches between windows (some actually say alt+~, but I think they're mistaken, and I've tried both anyway). Maybe that functionality works for Gnome 3 on Fedora or something, because no matter the key combo I try, nothing will switch between windows except for opening the alt+tab dialog and using arrow keys to navigate it (and at that point it's faster to just use a mouse..). How do I quickly switch between windows in Gnome 3?

  Read the article

• Having set up a DCHP server, what do I need to do for the rest of my network?

  - by fredley

  I've got a Raspberry Pi arriving any day now, and I intend to use it (amongst other things) as a DHCP server. Currently we have a few devices on our network to which we would like to assign static IPs, and a router, which is currently the DHCP server (the router can assign static IPs, but is buggy as hell, I've never got the config to stick for more than a few hours). Having connected the Pi to the network and configured dhcpl-3-server, what do I need to do on the rest of my network so that it works properly (clients get their IPs from the Pi, and use the Router as the default gateway)?

  Read the article

• Application to organize / manage installed networks

  - by vicmp3

  I was wondering if there is a Application where you can organize networks. I mean if you have installed some networks you have to note every pc's name, his ip-address and so on. Is there a Application where you can manage it? I saw the monitoring tools but that is not exactly what I'm looking for. Maybe I didnt explain me well, after all my englis his not so good :) For example if I install many different networks I write in a book how I configured them. I write pc-name ip-address ip-gateway ip-broadcast and so on for each network. It will be great if I can do it in a program to organize it well, and for example it gives me a node view of the network.

  Read the article

• How is Logitech C510 HD Webcam

  - by Ashfame

  I am going to buy Logitech C510 HD webcam and I just checked on other questions here on AskUbuntu that it works out of the box with cheese. Jorge's response also confirm this and I feel confident buying it now. My question is can it be limited in any functionality that I would like to do with it? I would like it to be used with everything - Skype, Gtalk video chat, Facebook, Youtube etc. Also this may sound lame but I need to know whether I could record or do a video call in lesser resolution video (its a 720p one)? Edit: Ported part of this question to another question to make it more specific.

  Read the article

• How can I enable audio system on Envy 15t-3200

  - by Dean Howell

  I just received my HP Envy 15 (June 2012 model) and I cannot get my audio system to fully function. This laptop has 6 speakers. 1.) 2 speakers on the front of the laptop (Stereo). 2.) 2 speakers above the keyboard, just before the LCD hinges. 3.) 2 Subwoofer speakers underneath the battery cover facing downward. Only the 2 speakers in the front are working. This is a "Beats" audio system. There have been many beats audio laptops before this one, so maybe if someone has experience with those, it might translate to this device.

  Read the article

• How to disable integrated webcam and still be able to use an external one

  - by alikasundara

  I am looking for a way to disable the webcam that is integrated into my laptop. The webcam is using uvcvideo module but I do not want to blacklist it since it is also being used by an external webcam I have. Is there any way of disabling the device itself without touching the modules list? This is how the webcams are listed by lsusb. The first one is an integrated one (It is identified by some apps as BisonCam NB Pro), the second one is the external Logitech C525: Bus 002 Device 004: ID 5986:0361 Acer, Inc Bus 003 Device 002: ID 046d:0826 Logitech, Inc. I have already checked BIOS - there is no way of disabling the webcam from there. Besides I would love to learn how to disable the device by ID anyway. Thanks!

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• why doesn't my computer resume after sleeping overnight?

  - by bamdad

  i'm having a weird, weird bug that's been haunting me since 11.10. if i listen to music or watch a video and my computer automatically goes to sleep at night, it won't properly resume in the morning. otherwise, suspend and resume works just fine. what happens is that the wi-fi and bluetooth indicator (that turns from white to orange when suspending) stays orange, the display doesn't turn on, and the only option i have is to hard reset the machine. here's what i've tried so far: installing (and uninstalling and reinstalling) laptop-mode-tools switching the proprietary wireless driver (broadcom-wl) to the open source one (brcmsmac & bcma) and back unloading (and blacklisting) all bluetooth modules (rfcomm, btusb, bnep, bluetooth) and stopping (# stop bluetooth) and disabling (# echo 'manual' /etc/init/bluetooth.override) the bluetooth service creating a custom pm sleep action as suggested here: http://ubuntuforums.org/showthread.php?p=11926504 not watching youtube / any stuff that uses flash before going to sleep (i have flashblock, and i checked $ ps aux | grep flash) because i suspected flash to be the culprit trying out different versions of fglrx (the one from the repos, then installing the latest one from amd's site via generated .deb files, then back to the official ones) none of these worked. i remember back in the days of 10.04, there was a gconf key called network sleep: i thought about disabling that, since re-enabling the wireless card seems to be the problem (according to the indicator led), but the option appears to be missing from gnome 3 (unity-2d, whatever). does anyone have any ideas? thanks, bamdad

  Read the article

• what are the "Online accounts" used for under System Settings?

  - by user67811

  I previously never bothered with it. but I just did a fresh install of 12.04 and figured "hey maybe i'll put in my google account and see what happens" I logged in with google and everyting like mal/calendar/contacts/chat is set to "on"... I figured it might automatically set up my gmail for various applications like empathy and thunderbird.. but I opened them up and found nothing... What exactly is the purpose of adding your account to "online accounts"? where is it used?

  Read the article

• Is there a way to schedule the downloads in Transmission BitTorrent Client?

  - by Ankit

  I have added a couple of torrent files to Transmission BitTorrent Client to be downloaded. I have a limited internet speed so I can't start all of them in a single go; so I have to peep in after every 30 minutes or so to start downloading other file(added to the client). I don't want to peep in 30 minutes; looking for a way to schedule the downloads (i.e when one download completes other files can start automatically) without manual intervention.

  Read the article

• Non persistent keyboard shortcuts in Unity

  - by nblumoe

  I did change the keyboard shortcuts for window navigation in Unity to use hjkl (vim movement). I did reassign the shortcuts via GUI in System Settings Keyboard Shortcuts. Here are two examples of the assigned shortcuts: Move window one workspace to the left = Shift+Ctrl+Alt+H Switch to workspace left = Ctrl+Alt+H Occasionally, when restarting the maching, these shortcuts are being reset to theit default values: Move window one workspace to the left = Shift+Ctrl+Alt+Left Switch to workspace left = Ctrl+Alt+Left How can I make these changes permanent? Can someone help me, narrowing down the problem?

  Read the article

• On-board HDMI Audio

  - by TrackStar

  I have tried searching for answers to this issue but have had no luck. My HDMI display is working but I have no audio from the HDMI .There is no option for HDMI under sound preferences hardware or output. Purging and re-installing pulse audio doesn't change anything. I am using the on-board HDMI port on my motherboard, I do not have a PCI graphics card installed. CPU: i7-3770 Mobo: Asus Sabertooth z77 Kernel: 2.6.39-3-bb03 running aplay -l returns ** List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Seems as if the system doesn't even recognize the possibilty of HDMI audio output. Any ideas?

  Read the article

• How to disable the text shadow in plasma widgets KDE 4.6?

  - by piedro

  I just switched completely to Kubuntu for the sake of the more suitable applications for my purposes and their overall integration in the system. But I'm not very happy with all those desktop effects and tranparent looks everywhere. Some things a matter of taste I guess. Some things just unbearable for me having weak eyes. One of them is that about every light theme seems to be using a text shadow effect on the plasma widgets. A white "spilled milk" effect underneath dark text on light grey or glassy background. Drives my eyes nuts! I can remove this effect on the desktop folder by unselecting "shadow" as text effect. I can't find any way to switch it of in the panel and the plasma widgets. My second, related question is, is there a plasma theme matching the oxygen look of the default desktop in light colors that uses the same colors as the ones chosen in the KDE color settings, - simple, opaque, no effects, gnome-like? Plz help someone! thx, piedro

  Read the article

• Where does a file copy to when I scp it?

  - by user2413

  Hi forum, i have this file myfirst.txt located on a cluster of computers down the hall, i.e.: myname@login1:~> ls myfirst.txt which i want to download to the home directory: scp [email protected]:myfirst.txt . to which i get: myfirst.txt 100% 1828 1.8KB/s 00:00 now where (on my home computer) is this myfirst.txt file ? i can't find it. It's not visible when i click 'show hidden files' either. Tia,

  Read the article

• When I run Android SDK from terminal, it shows error. How to fix it?

  - by diflame

  Exception in thread "main" java.lang.UnsatisfiedLinkError: no swt-gtk-3550 or swt-gtk in swt.library.path, java.library.path or the jar file at org.eclipse.swt.internal.Library.loadLibrary(Unknown Source) at org.eclipse.swt.internal.Library.loadLibrary(Unknown Source) at org.eclipse.swt.internal.C.<clinit>(Unknown Source) at org.eclipse.swt.internal.Converter.wcsToMbcs(Unknown Source) at org.eclipse.swt.internal.Converter.wcsToMbcs(Unknown Source) at org.eclipse.swt.widgets.Display.<clinit>(Unknown Source) at com.android.sdkmanager.Main.showSdkManagerWindow(Main.java:328) at com.android.sdkmanager.Main.doAction(Main.java:316) at com.android.sdkmanager.Main.run(Main.java:118) at com.android.sdkmanager.Main.main(Main.java:101)

  Read the article

• How to safely and painlessly switch from Kubuntu to Lubuntu?

  - by cdshines

  I've had Kubuntu installed for several years, updating from one major release to another, and now I think I'd like to try to switch to Lubuntu. But since my distribution is already tuned and shaped to satisfy my needs, I'd like not to get a fresh installation, but just purge kubuntu-desktop and install lubuntu-desktop. But when I execute sudo apt-get install lubuntu-desktop, it gives me an error of the following essence: The following packages have unmet dependencies: lubuntu-desktop : Depends: usb-modeswitch but it is not going to be installed E: Unable to correct problems, you have held broken packages. So, I investigate the modeswitch problem and get The following packages have unmet dependencies: usb-modeswitch : Depends: usb-modeswitch-data (>= 20110227-1~) but it is not going to be installed E: Unable to correct problems, you have held broken packages. But: Reading state information... Done usb-modeswitch-data is already the newest version. So, my question is: what actions should I take in order to obtain a clean and fresh installation of Lubuntu? And also, how do I safely remove all the kubuntu-desktop-related stuff?

  Read the article

• How to setup a wifi ap hotspot with ipv6 support?

  - by keyman

  How to setup a wifi ap (access point mode) hotspot, with IPv6 support? I've set up a hotspot according to the guide to wifi ap hotspot setup and it works fine. But via the hotspot I failed to visit IPv6 websites. How can I setup a hotspot able to share Ipv6 Internet access? Thanks! Further: Actually I've tried to setup IPv6 forwarding and masquerading. First enabling IPv6 forwarding: echo 1 | sudo tee net/ipv6/conf/default/forwarding Then I tried to execute: sudo ip6tables -t nat -A POSTROUTING -s 2001:db8:0:1::/64 -o eth0 -j MASQUERADE But it gave me an error: ip6tables v1.4.12: Couldn't load target `MASQUERADE':No such file or directory I searched through the Internet but I get confused. So I'm here for help. Thanks!

  Read the article

• How to move only a specific amount of images from a folder

  - by Luis Alvarado

  I have a folder that has 200.000 images. I want to do the following: Move an X amount of images (50 images, 100 images, 200 images) from that folder to Y folder. Each Y folder can be a number (Folder 1, Folder 2, Folder 3...). The end result might look like this: Folder 1 (Has X amount of images) Folder 2 (Has X amount of images) Folder 3 (Has X amount of images) Folder 4 (Has X amount of images)

  Read the article

• How can a script detect if the user is idle

  - by josinalvo

  I want to check, inside a bash script (*), how much time the user of a X session has been idle The user himself does not have to be using bash, but just X. If the user just moved the mouse, for example, a good answer would be "idle for 0 seconds". If he has not touched the computer in 5 minutes, a good answer would be "idle for 300 seconds" The reason to not use xautolock straight away is to be able to implement some complex behavior. For example, if the user is idle for 10 minutes, try to suspend, if he is idle for more 5 minutes, shutoff (I know it sounds odd, but suspend does not always work here ...) (*)or could be another language.

  Read the article

< Previous Page | 904 905 906 907 908 909 910 911 912 913 914 915  | Next Page >