Search Results

Search found 23648 results on 946 pages for 'tab size'.

Page 909/946 | < Previous Page | 905 906 907 908 909 910 911 912 913 914 915 916  | Next Page >

  • got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

    - by vinlata
    Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

    Read the article

  • How to export SQL Server data from corrupted database (with disk write error)

    - by damitamit
    IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit Results of DBBC CheckDB: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 7928, Level 16, State 1, Line 1 The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. Msg 5030, Level 16, State 12, Line 1 The database could not be exclusively locked to perform the operation. Msg 7926, Level 16, State 1, Line 1 Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details. Msg 823, Level 24, State 3, Line 1 The operating system returned error 1(error not found) to SQL Server during a write at offset 0x00000674706000 in file 'G:\AX40_Dynamics_Live.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.

    Read the article

  • Windows 7, file properties - Is "date accessed" ALWAYS 100% accurate?

    - by Robert
    Hello, Here's the situation: I went on vacation for a couple of weeks, but before I left, I took the harddrive out of my computer and hid it in a different location. Upon coming back on Monday and putting the harddrive back in my computer, I right-clicked on different files to see their properties. Interestingly enough, several files had been accessed during the time I was gone! I right-clicked different files in various locations on the harddrive, and all of these suspect files had been accessed within a certain time range (Sunday, ?January ?09, ?2011, approximately ??between 6:52:16 PM - 7:16:25 PM). Some of them had been accessed at the exact same time--down to the very second. This makes me think that someone must have done a search on my harddrive for certain types of files and then copied all those files to some other medium. The Windows 7 installation on this harddrive is password protected, but NOT encrypted, so they could have easily put the harddrive into an enclosure/toaster to access it from a different computer. Of course I did not right-click every single file on my computer, but did so in different folders. For instance, one of the folders I went through has different types of files: .mp3, ,prproj, .3gp, .mpg, .wmv, .xmp, .txt with file-sizes ranging from 2 KB to 29.7 MB (there is also a sub-folder in this folder which contains only .jpg files); however, of all these different types of files in this folder and its subfolder, all of them had been accessed (including the .jpg files from the sub-folder) EXCEPT the .mp3 files (if it makes any difference, the .mp3 files in this folder range in size from 187 KB to 4881 KB). Additionally, this sub-folder which contained only .jpg files (48 .jpg files to be exact) was not accessed during this time--only the .jpg files within it were accessed-- (between 6:57:03 PM - 6:57:08 PM). I thought that perhaps this was some kind of Windows glitch that was displaying the wrong access date, but then I looked at the "date created" and "date modified" for all of these files in question, and their created/modified dates and times were spot on correct. My first thought was that someone put the harddrive into an enclosure/toaster and viewed the files; but then I realized that this was impossible because several of the files had been accessed at the same exact time down to the second. So this made me think that the only other way the "date accessed" could have changed would have been if someone copied the files. Is there any chance at all whatsoever that this is some kind of Windows glitch or something, or is it a fact that someone was indeed accessing my files (and if someone was accessing my files, am I right about the files in question having been copied)? Is there any other possibility for what could have happened? Do I need to use any kinds of forensics tools to further investigate this matter (and if so, which tools), or is there any other way in which I can be certain of what took place in that timeframe the day before I got back? Or is what I see with Windows 7 good enough (i.e. accurate and truthful)? Thanks in advance, and please let me know if any other details are required on my part.

    Read the article

  • Connecting PC to TV via HDMI/DVI: Windows XP doesn't allow the appropriate screen resolution

    - by Jørgen
    I have a computer that is connected to the living room TV (a Panasonic) via HDMI. There is no other monitor connected. My problem is that the computer, which is running Windows XP, does not allow me to set the proper resolution for the TV. Both the graphics adapter and the TV should support the 1280x720 resolution, but it cannot be selected - the only available options are 1280x600 and 800x600, both in the "native" Windows dialog box and the custom Intel graphics options dialog box. Do anyone have a suggestion for a solution for this? Things I've thought of: Setting the resolution directly in the registry (where?) Installing some "custom" monitor driver (the TV manufacturer does not appear to provide any, currently the "generic" one is used) Details on the setup: Connection: DVI output on the computer via a passive DVI-HDMI adapter to the HDMI input on the TV, audio is run on a separate link, the TV is able to combine video and audio without any problem, the problem is there regardless of whether or not the audio is connected. The connection is several meters long through some walls, for this reason using a VGA cable instead is not an option. Note that the report explicitly says that the TV supports 1280x720. Still, I am not allowed to select it in Graphics Options, only 1280x600 and 800x600 is available. For 800x600, there's a lot of black around the edges; for 1280x600, the screen is "zoomed" so the edges of the monitor image (like the taskbar) is not visible. Other: The computer is running Windows XP. More recent versions of Windows are not an option (I have no licence). Linux is probably not an option (some of the video streaming sites I plan to use do not support it, I think) I wrote the rest of the details below. Thanks for any help!! TV: Panasonic TX-L32X10Y, European version; a 720p 32" quite "regular" LCD TV. Allowed resolutions according to manual: Signal name: 640x480 @60HZ Horizontal frequency: 31.47 kHz Vertical frequency: 60Hz Signal name: 750/720) /60p Horizontal frequency: 45.00 kHz Vertical frequency: 60Hz Signal name: 1,125 (1,080) / 60p Horizontal frequency: 67.50 kHz Vertical frequency: 60Hz (this is exactly how the manual presents it. PC via D-SUB (VGA cable) and "regular" HDMI have more alternatives.) Messing with the "zoom" settings on the TV does not affect the available resolution options on the computer. Computer: The following is a printout from one of the graphics adapter option pages. I think it covers most of it. The computer is a Dell. INTEL(R) EXTREME GRAPHICS 2 REPORT Report Date: 04/17/2011 Report Time[hr:mm:ss]: 20:18:02 Driver Version: 6.14.10.4396 Operating System: Windows XP* Professional, Service Pack 3 (5.1.2600) Default Language: English DirectX* Version: 9.0 Physical Memory: 1021 MB Minimum Graphics Memory: 1 MB Maximum Graphics Memory: 96 MB Graphics Memory in Use: 6 MB Processor: x86 Processor Speed: 2593 MHZ Vendor ID: 8086 Device ID: 2572 Device Revision: 02 * Accelerator Information * Accelerator in Use: Intel(R) 82865G Graphics Controller Video BIOS: 2972 Current Graphics Mode: 1280 by 600 True Color (60 Hz) * Devices Connected to the Graphics Accelerator * Active Digital Displays: 1 * Digital Display * Monitor Name: Plug and Play Monitor Display Type: Digital Gamma Value: 2.20 DDC2 Protocol: Supported Maximum Image Size: Horizontal: Not Available Vertical: Not Available Monitor Supported Modes: 1280 by 720 (50 Hz) 1280 by 720 (60 Hz) Display Power Management Support: Standby Mode: Not Supported Suspend Mode: Not Supported Active Off Mode: Not Supported (disclaimer: this question was also asked at the Wikipedia Reference Desk some time ago and might show up in a Google search. I got no useful answers there.)

    Read the article

  • Getting sendmail to install/work for using php mail()

    - by harryg
    I'm running WordPress on a Ubuntu VPS. When WordPress tries to send an email like a password reset or registration email it never gets delivered. WordPress uses php's mail() function. I figure it's not working as my VPS didn't have sendmail installed. So I went into SSH and installed it with sudo apt-get install sendmail which appeared to succeed. Following more googled advice I edited the php.ini file to have the sendmail path. I located it as being /usr/sbin/sendmail which I believe is typical for many *nix servers. To check I browsed to this directory on FTP. The "sendmail" directory appears to be a shortcut. Is this correct/expected? Either way the php mail function is not working. I have created a phpinfo file and a test mail php file which contains just a mail() function with my email as the recipient. Note: my VPS doesn't yet have a domain, just an IP address. Would this affect sendmail functionality? My phpinfo is here for your reference: http://95.142.166.209/phpinfo.php Do I also need postfix? I don't think I have it... Here is some of the mail log. I executed the mail function towards the end: Nov 27 18:41:02 sergeserver sm-msp-queue[5450]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 19:00:01 sergeserver sm-msp-queue[5497]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 19:01:01 sergeserver sm-msp-queue[5497]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 19:20:01 sergeserver sm-msp-queue[5532]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 19:21:01 sergeserver sm-msp-queue[5532]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 19:40:01 sergeserver sm-msp-queue[5568]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 19:41:01 sergeserver sm-msp-queue[5568]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 20:00:01 sergeserver sm-msp-queue[5605]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 20:01:01 sergeserver sm-msp-queue[5605]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 20:20:01 sergeserver sm-msp-queue[5641]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 20:21:01 sergeserver sm-msp-queue[5641]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 20:40:01 sergeserver sm-msp-queue[5675]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 20:41:01 sergeserver sm-msp-queue[5675]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 21:00:01 sergeserver sm-msp-queue[5712]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 21:01:01 sergeserver sm-msp-queue[5712]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 21:20:02 sergeserver sm-msp-queue[5747]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 21:21:02 sergeserver sm-msp-queue[5747]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 21:40:01 sergeserver sm-msp-queue[5782]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 21:41:01 sergeserver sm-msp-queue[5782]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:00:01 sergeserver sm-msp-queue[5831]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 22:01:01 sergeserver sm-msp-queue[5831]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:20:01 sergeserver sm-msp-queue[5866]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 22:21:01 sergeserver sm-msp-queue[5866]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:37:19 sergeserver sendmail[5903]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 22:38:19 sergeserver sendmail[5903]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:38:19 sergeserver sendmail[5903]: qARLcJYI005903: from=adminftp, size=158, class=0, nrcpts=0, msgid=<201211272138.qARLcJYI005903@sergeserver>, relay=adminftp@localhost

    Read the article

  • CHAT ROOMs 7 by 6

    - by user2939942
    I am looking for chatroom on one page with 7 loggedin users and 6+rows for say 42 users.these users will keep on adding wthnew users.Need urgent help.A PRETTY UNUSUAL Q FOR MOST OF U.What is MORE REQ new features: Usernames are unique to users currently chatting You can see a "currently chatting" user list There are multiple rooms for chatting <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Simpla Admin</title> <link rel="stylesheet" href="resources/css/reset.css" type="text/css" media="screen" /> <link rel="stylesheet" href="resources/css/style.css" type="text/css" media="screen" /> <link rel="stylesheet" href="resources/css/invalid.css" type="text/css" media="screen" /> <script type="text/javascript" src="resources/scripts/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="resources/scripts/simpla.jquery.configuration.js"></script> <script type="text/javascript" src="resources/scripts/facebox.js"></script> <script type="text/javascript" src="resources/scripts/jquery.wysiwyg.js"></script> <script type="text/javascript" src="resources/scripts/jquery.datePicker.js"></script> <script type="text/javascript" src="resources/scripts/jquery.date.js"></script> <script language="JavaScript" type="text/javascript" src="suggest3.js"></script><script language="javascript"> function popitappup4() { var aid=document.a.cid.value; var url="followup.php?id="+aid; alert(url); newwindow=window.open(url,'name','height=480,width=480, scrollbars=yes'); if (window.focus) {newwindow.focus()} return false; } </script> <script type="text/javascript" src="highslide-with-html.js"></script> <link rel="stylesheet" type="text/css" href="highslide.css" /> <script type="text/javascript"> hs.graphicsDir = 'graphics/'; hs.outlineType = 'rounded-white'; hs.wrapperClassName = 'draggable-header'; </script> <link type="text/css" rel="stylesheet" media="all" href="css/chat.css" /> <link type="text/css" rel="stylesheet" media="all" href="css/screen.css" /> </head> <body onload="fnew()"><div id="body-wrapper"> <!-- Wrapper for the radial gradient background --> <div id="sidebar"> <link type="text/css" rel="stylesheet" media="all" href="css/chat.css" /> <link type="text/css" rel="stylesheet" media="all" href="css/screen.css" /> <script type="text/javascript" src="js/jquery.js"></script> <script type="text/javascript" src="js/chat.js"></script> <script type="text/javascript"> function fnew() { document.getElementById("psearch").focus(); } </script> <div id="sidebar-wrapper"> <!-- Sidebar with logo and menu --> <h1 id="sidebar-title"><a href="#"></a></h1> <!-- Logo (221px wide) --> <a href="#"><img id="logo" src="resources/images/logo.png" alt="Simpla Admin logo" /></a> <!-- Sidebar Profile links --> <form name="frm" action="opd_view1.php"> <table width="240" border="0" cellspacing="0" cellpadding="0"> <tr> <td width="210"><div align="right" style="font-size:22px; color:#FFFFFF"><b>OPD Search</b></div></td> <td width="30"><div align="right"></div></td> </tr> <tr> <td align="right">&nbsp;</td> <td align="right">&nbsp;</td> </tr> <tr> <td align="right"><div align="right"> <input type="text" name="psearch" id="psearch" class="text-input" style="width:45mm;" /> </div></td> <td align="right"><div align="right"></div></td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td><div align="right"></div></td> <td><div align="right"></div></td> </tr> </table> </form> <div id="profile-links"> <a href="welcome.php" title="Sign Out" style="font-size:16px" ><b> </b></a> <br /> <a href="sample.php" title="Chat">Chat</a> </div></div> <!-- End #sidebar --> <div id="main-content"> <!-- Main Content Section with everything --> <noscript> <!-- Show a notification if the user has disabled javascript --> </noscript> <div style="width:100%; height: 600px; overflow-x: scroll; scrollbar-arrow-color: blue; scrollbar-face-color: #e7e7e7; scrollbar-3dlight-color: #a0a0a0; scrollbar-darkshadow-color: #888888; background-color:#FFFFFF "> <ul class="shortcut-buttons-set"> <!-- Page Head --> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drabhinit')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drabhinit</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drvarun')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drvarun</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sameer')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sameer</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drchetan')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drchetan</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neema')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neema</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpriya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpriya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drchhavi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drchhavi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsanjay')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsanjay</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('ruchi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>ruchi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drarchana')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drarchana</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drshraddha')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drshraddha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sunita')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sunita</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('reshma')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>reshma</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('riya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>riya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drritesh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drritesh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('rachana')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>rachana</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sunita')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sunita</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('kavye')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>kavye</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('paridhi')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>paridhi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('paridhi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>paridhi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsonika')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsonika</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('anny')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>anny</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('nitansh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>nitansh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drekta')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drekta</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drritesh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drritesh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neeraj')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neeraj</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neeraj')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neeraj</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drneha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drneha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('kirti')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>kirti</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drratna')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drratna</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drratana')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drratana</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnoopur')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnoopur</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('admin k')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>admin k</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('web')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>web</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drarti')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drarti</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsaqib')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsaqib</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neelesh')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neelesh</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('pooja')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>pooja</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drneha')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drneha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnupur')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnupur</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('isha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>isha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('isha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>isha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnamrata')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnamrata</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('ashish')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>ashish</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('ambrish')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>ambrish</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drrashmi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drrashmi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drsapna')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drsapna</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('manisha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>manisha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('Isha')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>Isha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drrashmi')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drrashmi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('Dr Meghna')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>Dr Meghna</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('akanksha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>akanksha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drashish')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drashish</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpriya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpriya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drnitya')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drnitya</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drmanoj')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drmanoj</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('sonali')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>sonali</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drkhushbu')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drkhushbu</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpriyanka')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpriyanka</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drabhishek')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drabhishek</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpoonam')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpoonam</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drprachi')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drprachi</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drpeenal')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drpeenal</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neerajpune')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neerajpune</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('paridhipune')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>paridhipune</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('faeem')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>faeem</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('rahul')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>rahul</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('DrNeha')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>DrNeha</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drmrigendra')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drmrigendra</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('neetu')" rel="modal" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>neetu</span></a></li> <li> <a class="shortcut-button" href="javascript:void(0)" onClick="javascript:chatWith('drriteshpawar')" rel="modal" style=" background-color:#00FF00" ><span><img src="resources/images/icons/comment_48.png" alt="icon" width="48" height="48" /> <br/>drriteshpawar</span></a></li> </ul> </div> <script type="text/javascript" src="js/jquery.js"></script> <script type="text/javascript" src="js/chat.js"></script> <!-- End .shortcut-buttons-set --> <div class="clear"></div> <div class="clear"></div>

    Read the article

  • How do I set the encoding statement in the XML declaration when performing an XSL transformation usi

    - by aspiehler
    I wrote a simple package installer in WinBatch that needs to update an XML file with information about the package contents. My first stab at it involved loading the file with Msxml2.DOMDocument, adding nodes and data as required, then saving the data back to disk. This worked well enough, except that it would not create tab and CR/LF whitespace in the new data. The solution I came up with was writing an XSL stylesheet that would recreate the XML file with whitespace added back in. I'm doing this by: loading the XSL file into an Msxml2.FreeThreadedDOMDocument object setting that object as the stylesheet property of an Msxml2.XSLTemplate object creating an XSL processor via Msxml2.XSLTemplate.createProcessor() setting my original Msxml2.DOMDocument as the input property of the XSL processor Calling transform() method of the XSL processor, and saving the output to a file. This works as for as reformatting the XML file with tabs and carriage returns, but my XML declaration comes out either as <?xml version="1.0"?> or <?xml version="1.0" encoding="UTF-16"?> depending on whether I used Msxml2.*.6.0 or Msxml2.* objects (a fall back if the system doesn't have 6.0). If the encoding is set to UTF-16, Msxml12.DOMDocument complains about trying to convert UTF-16 to 1-byte encoding the next time I run my package installer. I've tried creating and adding an XML declaration using both createProcessingInstruction() to both the XML and XSL DOM objects, but neither one seems to affect the output of the XSLTemplate processor. I've also set encoding to UTF-8 in the <xsl:output/> tag in my XSL file. Here is the relevant code in my Winbatch script: xmlDoc = ObjectCreate("Msxml2.DOMDocument.6.0") if !xmlDoc then xmlDoc = ObjectCreate("Msxml2.DOMDocument") xmlDoc.async = @FALSE xmlDoc.validateOnParse = @TRUE xmlDoc.resolveExternals = @TRUE xmlDoc.preserveWhiteSpace = @TRUE xmlDoc.setProperty("SelectionLanguge", "XPath") xmlDoc.setProperty("SelectionNamespaces", "xmlns:fns='http://www.abc.com/f_namespace'") xmlDoc.load(xml_file_path) xslStyleSheet = ObjectCreate("Msxml2.FreeThreadedDOMDocument.6.0") if !xslStyleSheet then xslStyleSheet = ObjectCreate("Msxml2.FreeThreadedDOMDocument") xslStyleSheet.async = @FALSE xslStyleSheet.validateOnParse = @TRUE xslStyleSheet.load(xsl_style_sheet_path) xslTemplate = ObjectCreate("Msxml2.XSLTemplate.6.0") if !xslTemplate then xslTemplate = ObjectCreate("Msxml2.XSLTemplate") xslTemplate.stylesheet = xslStyleSheet processor = xslTemplate.createProcessor() processor.input = xmlDoc processor.transform() ; create a new file and write the XML processor output to it fh = FileOpen(output_file_path, "WRITE" , @FALSE) FileWrite(fh, processor.output) FileClose(fh) The style sheet, with some slight changes to protect the innocent: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.1"> <xsl:output method="xml" indent="yes" encoding="UTF-8"/> <xsl:template match="/"> <fns:test_station xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:fns="http://www.abc.com/f_namespace"> <xsl:for-each select="/fns:test_station/identification"> <xsl:text>&#x0A; </xsl:text> <identification> <xsl:for-each select="./*"> <xsl:text>&#x0A; </xsl:text> <xsl:copy-of select="."/> </xsl:for-each> <xsl:text>&#x0A; </xsl:text> </identification> </xsl:for-each> <xsl:for-each select="/fns:test_station/software"> <xsl:text>&#x0A; </xsl:text> <software> <xsl:for-each select="./package"> <xsl:text>&#x0A; </xsl:text> <package> <xsl:for-each select="./*"> <xsl:text>&#x0A; </xsl:text> <xsl:copy-of select="."/> </xsl:for-each> <xsl:text>&#x0A; </xsl:text> </package> </xsl:for-each> <xsl:text>&#x0A; </xsl:text> </software> </xsl:for-each> <xsl:for-each select="/fns:test_station/calibration"> <xsl:text>&#x0A; </xsl:text> <calibration> <xsl:for-each select="./item"> <xsl:text>&#x0A; </xsl:text> <item> <xsl:for-each select="./*"> <xsl:text>&#x0A; </xsl:text> <xsl:copy-of select="."/> </xsl:for-each> <xsl:text>&#x0A; </xsl:text> </item> </xsl:for-each> <xsl:text>&#x0A; </xsl:text> </calibration> </xsl:for-each> </fns:test_station> </xsl:template> </xsl:stylesheet> And this is a sample output file: <?xml version="1.0" encoding="UTF-16"?> <fns:test_station xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:fns="http://www.abc.com/f_namespace"> <software> <package> <part_number>123456789</part_number> <version>00</version> <test_category>1</test_category> <description>name of software package</description> <execution_path>c:\program files\test\test.exe</execution_path> <execution_arguments>arguments</execution_arguments> <crc_path>c:\ste_config\crc\123456789.lst</crc_path> <uninstall_path>c:\ste_config\uninstall\uninst_123456789.bat</uninstall_path> <install_timestamp>2009-11-09T14:00:44</install_timestamp> </package> </software> </fns:test_station>

    Read the article

  • Create Resume problem

    - by ar31an
    hello mates, i am working on a project of online resume management system and i am encountering an exception while creating resume. [b] Exception: Data type mismatch in criteria expression. [/b] here is my code for Create Resume-1.aspx.cs using System; using System.Data; using System.Configuration; using System.Collections; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.Data.OleDb; public partial class _Default : System.Web.UI.Page { string sql, sql2, sql3, sql4, sql5, sql6, sql7, sql8, sql9, sql10, sql11, sql12; string conString = "Provider=Microsoft.ACE.OLEDB.12.0; Data Source=D:\\Deliverable4.accdb"; protected OleDbConnection rMSConnection; protected OleDbCommand rMSCommand; protected OleDbDataAdapter rMSDataAdapter; protected DataSet dataSet; protected DataTable dataTable; protected DataRow dataRow; protected void Page_Load(object sender, EventArgs e) { } protected void Button1_Click(object sender, EventArgs e) { string contact1 = TextBox1.Text; string contact2 = TextBox2.Text; string cellphone = TextBox3.Text; string address = TextBox4.Text; string city = TextBox5.Text; string addqualification = TextBox18.Text; //string SecondLastDegreeGrade = TextBox17.Text; //string SecondLastDegreeInstitute = TextBox16.Text; //string SecondLastDegreeNameOther = TextBox15.Text; string LastDegreeNameOther = TextBox11.Text; string LastDegreeInstitute = TextBox12.Text; string LastDegreeGrade = TextBox13.Text; string tentativeFromDate = (DropDownList4.SelectedValue + " " + DropDownList7.SelectedValue + " " + DropDownList8.SelectedValue); try { sql6 = "select CountryID from COUNTRY"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql6, rMSConnection); dataSet = new DataSet("cID"); rMSDataAdapter.Fill(dataSet, "COUNTRY"); dataTable = dataSet.Tables["COUNTRY"]; int cId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql4 = "select PersonalDetailID from PERSONALDETAIL"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql4, rMSConnection); dataSet = new DataSet("PDID"); rMSDataAdapter.Fill(dataSet, "PERSONALDETAIL"); dataTable = dataSet.Tables["PERSONALDETAIL"]; int PDId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql5 = "update PERSONALDETAIL set Phone1 ='" + contact1 + "' , Phone2 = '" + contact2 + "', CellPhone = '" + cellphone + "', Address = '" + address + "', City = '" + city + "', CountryID = '" + cId + "' where PersonalDetailID = '" + PDId + "'"; rMSConnection = new OleDbConnection(conString); rMSConnection.Open(); rMSCommand = new OleDbCommand(sql5, rMSConnection); rMSCommand.ExecuteNonQuery(); rMSConnection.Close(); sql3 = "select DesignationID from DESIGNATION"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql3, rMSConnection); dataSet = new DataSet("DesID"); rMSDataAdapter.Fill(dataSet, "DESIGNATION"); dataTable = dataSet.Tables["DESIGNATION"]; int desId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql2 = "select DepartmentID from DEPARTMENT"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql2, rMSConnection); dataSet = new DataSet("DID"); rMSDataAdapter.Fill(dataSet, "DEPARTMENT"); dataTable = dataSet.Tables["DEPARTMENT"]; int dId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql7 = "select ResumeID from RESUME"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql7, rMSConnection); dataSet = new DataSet("rID"); rMSDataAdapter.Fill(dataSet, "RESUME"); dataTable = dataSet.Tables["RESUME"]; int rId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql = "update RESUME set PersonalDetailID ='" + PDId + "' , DesignationID = '" + desId + "', DepartmentID = '" + dId + "', TentativeFromDate = '" + tentativeFromDate + "', AdditionalQualification = '" + addqualification + "' where ResumeID = '" + rId + "'"; rMSConnection = new OleDbConnection(conString); rMSConnection.Open(); rMSCommand = new OleDbCommand(sql, rMSConnection); rMSCommand.ExecuteNonQuery(); rMSConnection.Close(); sql8 = "insert into INSTITUTE (InstituteName) values ('" + LastDegreeInstitute + "')"; rMSConnection = new OleDbConnection(conString); rMSConnection.Open(); rMSCommand = new OleDbCommand(sql8, rMSConnection); rMSCommand.ExecuteNonQuery(); rMSConnection.Close(); sql9 = "insert into DEGREE (DegreeName) values ('" + LastDegreeNameOther + "')"; rMSConnection = new OleDbConnection(conString); rMSConnection.Open(); rMSCommand = new OleDbCommand(sql9, rMSConnection); rMSCommand.ExecuteNonQuery(); rMSConnection.Close(); sql11 = "select InstituteID from INSTITUTE"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql11, rMSConnection); dataSet = new DataSet("insID"); rMSDataAdapter.Fill(dataSet, "INSTITUTE"); dataTable = dataSet.Tables["INSTITUTE"]; int insId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql12 = "select DegreeID from DEGREE"; rMSConnection = new OleDbConnection(conString); rMSDataAdapter = new OleDbDataAdapter(sql12, rMSConnection); dataSet = new DataSet("degID"); rMSDataAdapter.Fill(dataSet, "DEGREE"); dataTable = dataSet.Tables["DEGREE"]; int degId = (int)dataTable.Rows[0][0]; rMSConnection.Close(); sql10 = "insert into QUALIFICATION (Grade, ResumeID, InstituteID, DegreeID) values ('" + LastDegreeGrade + "', '" + rId + "', '" + insId + "', '" + degId + "')"; rMSConnection = new OleDbConnection(conString); rMSConnection.Open(); rMSCommand = new OleDbCommand(sql10, rMSConnection); rMSCommand.ExecuteNonQuery(); rMSConnection.Close(); Response.Redirect("Applicant.aspx"); } catch (Exception exp) { rMSConnection.Close(); Label1.Text = "Exception: " + exp.Message; } } protected void Button2_Click(object sender, EventArgs e) { } } And for Create Resume-1.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Create Resume-1.aspx.cs" Inherits="_Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <div><center> <strong><span style="font-size: 16pt"></span></strong>&nbsp;</center> <center> &nbsp;</center> <center style="background-color: silver"> &nbsp;</center> <center> <strong><span style="font-size: 16pt">Step 1</span></strong></center> <center style="background-color: silver"> &nbsp;</center> <center> &nbsp;</center> <center> &nbsp;</center> <center> <asp:Label ID="PhoneNo1" runat="server" Text="Contact No 1*"></asp:Label> <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox1"></asp:RequiredFieldValidator><br /> <asp:Label ID="PhoneNo2" runat="server" Text="Contact No 2"></asp:Label> <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox><br /> <asp:Label ID="CellNo" runat="server" Text="Cell Phone No"></asp:Label> <asp:TextBox ID="TextBox3" runat="server"></asp:TextBox><br /> <asp:Label ID="Address" runat="server" Text="Street Address*"></asp:Label> <asp:TextBox ID="TextBox4" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox4"></asp:RequiredFieldValidator><br /> <asp:Label ID="City" runat="server" Text="City*"></asp:Label> <asp:TextBox ID="TextBox5" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox5"></asp:RequiredFieldValidator><br /> <asp:Label ID="Country" runat="server" Text="Country of Origin*"></asp:Label> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1" DataTextField="CountryName" DataValueField="CountryID"> </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString7 %>" DeleteCommand="DELETE FROM [COUNTRY] WHERE (([CountryID] = ?) OR ([CountryID] IS NULL AND ? IS NULL))" InsertCommand="INSERT INTO [COUNTRY] ([CountryID], [CountryName]) VALUES (?, ?)" ProviderName="<%$ ConnectionStrings:ConnectionString7.ProviderName %>" SelectCommand="SELECT * FROM [COUNTRY]" UpdateCommand="UPDATE [COUNTRY] SET [CountryName] = ? WHERE (([CountryID] = ?) OR ([CountryID] IS NULL AND ? IS NULL))"> <DeleteParameters> <asp:Parameter Name="CountryID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="CountryName" Type="String" /> <asp:Parameter Name="CountryID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="CountryID" Type="Int32" /> <asp:Parameter Name="CountryName" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="DropDownList1"></asp:RequiredFieldValidator><br /> <asp:Label ID="DepartmentOfInterest" runat="server" Text="Department of Interest*"></asp:Label> <asp:DropDownList ID="DropDownList2" runat="server" DataSourceID="SqlDataSource2" DataTextField="DepartmentName" DataValueField="DepartmentID"> </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString7 %>" DeleteCommand="DELETE FROM [DEPARTMENT] WHERE [DepartmentID] = ?" InsertCommand="INSERT INTO [DEPARTMENT] ([DepartmentID], [DepartmentName]) VALUES (?, ?)" ProviderName="<%$ ConnectionStrings:ConnectionString7.ProviderName %>" SelectCommand="SELECT * FROM [DEPARTMENT]" UpdateCommand="UPDATE [DEPARTMENT] SET [DepartmentName] = ? WHERE [DepartmentID] = ?"> <DeleteParameters> <asp:Parameter Name="DepartmentID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DepartmentName" Type="String" /> <asp:Parameter Name="DepartmentID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DepartmentID" Type="Int32" /> <asp:Parameter Name="DepartmentName" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="DropDownList2"></asp:RequiredFieldValidator><br /> <asp:Label ID="DesignationAppliedFor" runat="server" Text="Position Applied For*"></asp:Label> <asp:DropDownList ID="DropDownList3" runat="server" DataSourceID="SqlDataSource3" DataTextField="DesignationName" DataValueField="DesignationID"> </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString7 %>" DeleteCommand="DELETE FROM [DESIGNATION] WHERE [DesignationID] = ?" InsertCommand="INSERT INTO [DESIGNATION] ([DesignationID], [DesignationName], [DesignationStatus]) VALUES (?, ?, ?)" ProviderName="<%$ ConnectionStrings:ConnectionString7.ProviderName %>" SelectCommand="SELECT * FROM [DESIGNATION]" UpdateCommand="UPDATE [DESIGNATION] SET [DesignationName] = ?, [DesignationStatus] = ? WHERE [DesignationID] = ?"> <DeleteParameters> <asp:Parameter Name="DesignationID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DesignationName" Type="String" /> <asp:Parameter Name="DesignationStatus" Type="String" /> <asp:Parameter Name="DesignationID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DesignationID" Type="Int32" /> <asp:Parameter Name="DesignationName" Type="String" /> <asp:Parameter Name="DesignationStatus" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:RequiredFieldValidator ID="RequiredFieldValidator6" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="DropDownList3"></asp:RequiredFieldValidator><br /> <asp:Label ID="TentativeFromDate" runat="server" Text="Can Join From*"></asp:Label> <asp:DropDownList ID="DropDownList4" runat="server"> <asp:ListItem>1</asp:ListItem> <asp:ListItem>2</asp:ListItem> <asp:ListItem>3</asp:ListItem> <asp:ListItem>4</asp:ListItem> <asp:ListItem>5</asp:ListItem> <asp:ListItem>6</asp:ListItem> <asp:ListItem>7</asp:ListItem> <asp:ListItem>8</asp:ListItem> <asp:ListItem>9</asp:ListItem> <asp:ListItem>10</asp:ListItem> <asp:ListItem>11</asp:ListItem> <asp:ListItem>12</asp:ListItem> </asp:DropDownList>&nbsp;<asp:DropDownList ID="DropDownList7" runat="server"> <asp:ListItem>1</asp:ListItem> <asp:ListItem>2</asp:ListItem> <asp:ListItem>3</asp:ListItem> <asp:ListItem>4</asp:ListItem> <asp:ListItem>5</asp:ListItem> <asp:ListItem>6</asp:ListItem> <asp:ListItem>7</asp:ListItem> <asp:ListItem>8</asp:ListItem> <asp:ListItem>9</asp:ListItem> <asp:ListItem>10</asp:ListItem> <asp:ListItem>11</asp:ListItem> <asp:ListItem>12</asp:ListItem> <asp:ListItem>13</asp:ListItem> <asp:ListItem>14</asp:ListItem> <asp:ListItem>15</asp:ListItem> <asp:ListItem>16</asp:ListItem> <asp:ListItem>17</asp:ListItem> <asp:ListItem>18</asp:ListItem> <asp:ListItem>19</asp:ListItem> <asp:ListItem>20</asp:ListItem> <asp:ListItem>21</asp:ListItem> <asp:ListItem>22</asp:ListItem> <asp:ListItem>23</asp:ListItem> <asp:ListItem>24</asp:ListItem> <asp:ListItem>25</asp:ListItem> <asp:ListItem>26</asp:ListItem> <asp:ListItem>27</asp:ListItem> <asp:ListItem>28</asp:ListItem> <asp:ListItem>29</asp:ListItem> <asp:ListItem>30</asp:ListItem> <asp:ListItem>31</asp:ListItem> </asp:DropDownList> <asp:DropDownList ID="DropDownList8" runat="server"> <asp:ListItem>2010</asp:ListItem> </asp:DropDownList> <asp:RequiredFieldValidator ID="RequiredFieldValidator7" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="DropDownList4"></asp:RequiredFieldValidator></center> <center> <br /> <asp:Label ID="LastDegreeName" runat="server" Text="Last Degree*"></asp:Label> <asp:DropDownList ID="DropDownList5" runat="server" DataSourceID="SqlDataSource5" DataTextField="DegreeName" DataValueField="DegreeID"> </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource5" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString7 %>" DeleteCommand="DELETE FROM [DEGREE] WHERE [DegreeID] = ?" InsertCommand="INSERT INTO [DEGREE] ([DegreeID], [DegreeName]) VALUES (?, ?)" ProviderName="<%$ ConnectionStrings:ConnectionString7.ProviderName %>" SelectCommand="SELECT * FROM [DEGREE]" UpdateCommand="UPDATE [DEGREE] SET [DegreeName] = ? WHERE [DegreeID] = ?"> <DeleteParameters> <asp:Parameter Name="DegreeID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DegreeName" Type="String" /> <asp:Parameter Name="DegreeID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DegreeID" Type="Int32" /> <asp:Parameter Name="DegreeName" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:RequiredFieldValidator ID="RequiredFieldValidator8" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="DropDownList5"></asp:RequiredFieldValidator><br /> <asp:Label ID="LastDegreeNameOther" runat="server" Text="Other"></asp:Label> <asp:TextBox ID="TextBox11" runat="server"></asp:TextBox><br /> <asp:Label ID="LastDegreeInstitute" runat="server" Text="Institute Name*"></asp:Label> <asp:TextBox ID="TextBox12" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator9" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox12"></asp:RequiredFieldValidator><br /> <asp:Label ID="LastDegreeGrade" runat="server" Text="Marks / Grade*"></asp:Label> <asp:TextBox ID="TextBox13" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator10" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox13"></asp:RequiredFieldValidator></center> <center> &nbsp;</center> <center> <br /> <asp:Label ID="SecondLastDegreeName" runat="server" Text="Second Last Degree*"></asp:Label> <asp:DropDownList ID="DropDownList6" runat="server" DataSourceID="SqlDataSource4" DataTextField="DegreeName" DataValueField="DegreeID"> </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource4" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString7 %>" DeleteCommand="DELETE FROM [DEGREE] WHERE [DegreeID] = ?" InsertCommand="INSERT INTO [DEGREE] ([DegreeID], [DegreeName]) VALUES (?, ?)" ProviderName="<%$ ConnectionStrings:ConnectionString7.ProviderName %>" SelectCommand="SELECT * FROM [DEGREE]" UpdateCommand="UPDATE [DEGREE] SET [DegreeName] = ? WHERE [DegreeID] = ?"> <DeleteParameters> <asp:Parameter Name="DegreeID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DegreeName" Type="String" /> <asp:Parameter Name="DegreeID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DegreeID" Type="Int32" /> <asp:Parameter Name="DegreeName" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:RequiredFieldValidator ID="RequiredFieldValidator11" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="DropDownList6"></asp:RequiredFieldValidator><br /> <asp:Label ID="SecondLastDegreeNameOther" runat="server" Text="Other"></asp:Label> <asp:TextBox ID="TextBox15" runat="server"></asp:TextBox><br /> <asp:Label ID="SecondLastDegreeInstitute" runat="server" Text="Institute Name*"></asp:Label> <asp:TextBox ID="TextBox16" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator12" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox16"></asp:RequiredFieldValidator><br /> <asp:Label ID="SecondLastDegreeGrade" runat="server" Text="Marks / Grade*"></asp:Label> <asp:TextBox ID="TextBox17" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator13" runat="server" ErrorMessage="Items marked with '*' cannot be left blank." ControlToValidate="TextBox17"></asp:RequiredFieldValidator></center> <center> <br /> <asp:Label ID="AdditionalQualification" runat="server" Text="Additional Qualification"></asp:Label> <asp:TextBox ID="TextBox18" runat="server" TextMode="MultiLine"></asp:TextBox></center> <center> &nbsp;</center> <center> <asp:Button ID="Button1" runat="server" Text="Save and Exit" OnClick="Button1_Click" /> &nbsp;&nbsp; <asp:Button ID="Button2" runat="server" Text="Next" OnClick="Button2_Click" /></center> <center> &nbsp;</center> <center> <asp:Label ID="Label1" runat="server"></asp:Label>&nbsp;</center> <center> &nbsp;</center> <center style="background-color: silver"> &nbsp;</center> </div> </form> </body> </html>

    Read the article

  • How to implement Google Maps new version of API v2

    - by bapatla
    Hi every one I came to know that google maps has deprecated its previous version API v1 and introduced a new version of google maps API v2. I tried out one example by following some links in google any how i am pretty sure that i got the api key correctly by providing the exact hash key code and managed to get the correct api key. Now i managed to write some code as well but when i tried to execute the code i am getting the errors please help me to solve this here is my code and i even tried the sample codes provided by google play services an i got the same problem this is the sample that i have done by referring some links in google main activity package com.example.apv; import com.google.android.gms.maps.CameraUpdateFactory; import com.google.android.gms.maps.GoogleMap; import com.google.android.gms.maps.MapFragment; import com.google.android.gms.maps.model.BitmapDescriptorFactory; import com.google.android.gms.maps.model.LatLng; import com.google.android.gms.maps.model.MarkerOptions; import android.os.Bundle; import android.app.Activity; import android.app.FragmentManager; public class MainActivity extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); FragmentManager fragmentManager = getFragmentManager(); MapFragment mapFragment = (MapFragment) fragmentManager.findFragmentById(R.id.map); GoogleMap googleMap = mapFragment.getMap(); LatLng sfLatLng = new LatLng(37.7750, -122.4183); googleMap.setMapType(GoogleMap.MAP_TYPE_NORMAL); googleMap.addMarker(new MarkerOptions() .position(sfLatLng) .title("San Francisco") .snippet("Population: 776733") .icon(BitmapDescriptorFactory.defaultMarker( BitmapDescriptorFactory.HUE_AZURE))); googleMap.getUiSettings().setCompassEnabled(true); googleMap.getUiSettings().setZoomControlsEnabled(true); googleMap.animateCamera(CameraUpdateFactory.newLatLngZoom(sfLatLng, 10)); } } main.xml <?xml version="1.0" encoding="utf-8"?> <fragment xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/map" android:layout_width="match_parent" android:layout_height="match_parent" class="com.google.android.gms.maps.MapFragment"/> and finally my manifest file <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.apv" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="17"/> <permission android:name="com.codebybrian.mapsample.permission.MAPS_RECEIVE" android:protectionLevel="signature"/> <!--Required permissions--> permission oid:name="com.codebybrian.mapsample.permission.MAPS_RECEIVE"/> <!--Used by the API to download map tiles from Google Maps servers: --> <uses-permission android:name="android.permission.INTERNET"/> <!--Allows the API to access Google web-based services: --> <uses-permission android:name="com.google.android.providers.gsf.permission.READ_GSERVICES"/> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/> <!--Optional permissions--> <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/> <!--Version 2 of the Google Maps Android API requires OpenGL ES version 2 --> <uses-feature android:glEsVersion="0x00020000" android:required="true"/> application android:label="@string/app_name" android:icon="@drawable/ic_launcher"> <activity android:name=".MyMapActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN"/> <category android:name="android.intent.category.LAUNCHER"/> </intent-filter> </activity> <meta-data android:name="com.google.android.maps.v2.API_KEY" android:value="AZzaSSsBmhi4dXoKSylGGmjkQ5Jev9UdAJBjk"/> </application> </manifest> i run my application in emulator of version 4.2 and api level of 17 i got following error 12-17 10:06:52.590: E/Trace(826): error opening trace file: No such file or directory (2) 12-17 10:06:52.590: W/Trace(826): Unexpected value from nativeGetEnabledTags: 0 12-17 10:06:52.590: W/Trace(826): Unexpected value from nativeGetEnabledTags: 0 12-17 10:06:52.590: W/Trace(826): Unexpected value from nativeGetEnabledTags: 0 12-17 10:06:52.680: I/ActivityThread(826): Pub com.google.android.gms.plus;com.google.android.gms.plus.action: com.google.android.gms.plus.provider.PlusProvider 12-17 10:06:52.740: W/Trace(826): Unexpected value from nativeGetEnabledTags: 0 12-17 10:06:52.740: W/Trace(826): Unexpected value from nativeGetEnabledTags: 0 12-17 10:06:52.760: W/Trace(826): Unexpected value from nativeGetEnabledTags: 0 later i came to know that these version cant execute in emulator so i tried executing it with two devices one is Sony xperia u of android version 2.3.7 and Samsung galaxy tab of android version 4.1.1 and these are my outputs 12-17 14:37:02.468: D/AndroidRuntime(7636): Shutting down VM 12-17 14:37:02.468: W/dalvikvm(7636): threadid=1: thread exiting with uncaught exception (group=0x41f672a0) 12-17 14:37:02.476: E/AndroidRuntime(7636): FATAL EXCEPTION: main 12-17 14:37:02.476: E/AndroidRuntime(7636): java.lang.RuntimeException: Unable to instantiate activity ComponentInfo{com.example.apv/com.example.apv.MyMapActivity}: java.lang.ClassNotFoundException: com.example.apv.MyMapActivity 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2021) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2122) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.ActivityThread.access$600(ActivityThread.java:140) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1228) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.os.Handler.dispatchMessage(Handler.java:99) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.os.Looper.loop(Looper.java:137) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.ActivityThread.main(ActivityThread.java:4895) 12-17 14:37:02.476: E/AndroidRuntime(7636): at java.lang.reflect.Method.invokeNative(Native Method) 12-17 14:37:02.476: E/AndroidRuntime(7636): at java.lang.reflect.Method.invoke(Method.java:511) 12-17 14:37:02.476: E/AndroidRuntime(7636): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller .run(ZygoteInit.java:994) 12-17 14:37:02.476: E/AndroidRuntime(7636): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:761) 12-17 14:37:02.476: E/AndroidRuntime(7636): at dalvik.system.NativeStart.main(Native Method) 12-17 14:37:02.476: E/AndroidRuntime(7636): Caused by: java.lang.ClassNotFoundException: com.example.apv.MyMapActivity 12-17 14:37:02.476: E/AndroidRuntime(7636): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:61) 12-17 14:37:02.476: E/AndroidRuntime(7636): at java.lang.ClassLoader.loadClass(ClassLoader.java:501) 12-17 14:37:02.476: E/AndroidRuntime(7636): at java.lang.ClassLoader.loadClass(ClassLoader.java:461) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.Instrumentation.newActivity(Instrumentation.java:1068) 12-17 14:37:02.476: E/AndroidRuntime(7636): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2012) 12-17 14:37:02.476: E/AndroidRuntime(7636): ... 11 more could any one please suggest me to how to get this done and give me some links of new version API v2 tutorials of google maps and some examples links please help me

    Read the article

  • Select list auto update on any kind of change?

    - by Tom Irons
    I have a jQuery that when you click on a select option it will show the next one, but you have to click, you cant just use the down arrow or "tab" to the next option. I am wondering what options do I have to make this work? Here is my jQuery: function typefunction() { var itemTypes = jQuery('#type'); var select = this.value; itemTypes.change(function () { if ($(this).val() == '1-Hand') { $('.1-Hand').show(); $('.2-Hand').hide(); $('.off').hide(); $('.Armor').hide(); } else $('.1-Hand').hide(); if ($(this).val() == '2-Hand') { $('.2-Hand').show(); $('.1-Hand').hide(); $('.off').hide(); $('.Armor').hide(); } else $('.2-Hand').hide(); if ($(this).val() == 'Armor') { $('.Armor').show(); $('.2-Hand').hide(); $('.off').hide(); $('.1-Hand').hide(); } else $('.Armor').hide(); if ($(this).val() == 'Off-Hand') { $('.Off').show(); $('.2-Hand').hide(); $('.1-Hand').hide(); $('.Armor').hide(); } else $('.Off').hide(); if ($(this).val() == '1-Hand') { $('.one-hand-dps').show(); $('.item-armor').hide(); $('.two-hand-dps').hide(); } else $('.one-hand-dps').hide(); if ($(this).val() == '2-Hand') { $('.two-hand-dps').show(); $('.one-hand-dps').hide(); $('.item-armor').hide(); } else $('.two-hand-dps').hide(); if ($(this).val() == 'Armor') { $('.item-armor').show(); $('.one-hand-dps').hide(); $('.two-hand-dps').hide(); } else $('.item-armor').hide(); }); } And the HTML: <div class="input-group item"> <span class="input-group-addon">Type</span> <select id="type" name="type" class="form-control" onclick="typefunction(); itemstats(); Armor(); OffHand(); TwoHand();"> <option value="Any Type">Any Type</option> <option value="1-Hand">1-Hand</option> <option value="2-Hand">2-Hand</option> <option value="Armor">Armor</option> <option value="Off-Hand">Off-Hand</option> </select> </div> <div class="input-group item"> <span class="1-Hand input-group-addon" style="display: none;">Sub-Type</span> <select class="1-Hand form-control" name="sub[1]" style="display: none;"> <option value="All 1-Hand Item Types">All 1-Hand Item Types</option> <option>Axe</option> <option>Ceremonial Knife</option> <option>Hand Crossbow</option> <option>Dagger</option> <option>Fist Weapon</option> <option>Mace</option> <option>Mighty Weapon</option> <option>Spear</option> <option>Sword</option> <option>Wand</option> </select> </div> <div class="input-group"> <span class="2-Hand input-group-addon" style="display: none; ">Sub-Type</span> <select class="2-Hand form-control" name="sub[2]" style="display: none;"> <option>All 2-Hand Item Types</option> <option>Two-Handed Axe</option> <option>Bow</option> <option>Diabo</option> <option>Crossbow</option> <option>Two-Handed Mace</option> <option>Two-Handed Mighty Weapon</option> <option>Polearm</option> <option>Staff</option> <option>Two-Handed Sword</option> </select> </div> <div class="input-group"> <span class="Armor input-group-addon" style="display: none;">Sub-Type</span> <select class="Armor form-control" name="sub[3]" style="display:none;"> <option>All Armor Item Types</option> <option>Amulet</option> <option>Belt</option> <option>Boots</option> <option>Bracers</option> <option>Chest Armor</option> <option>Cloak</option> <option>Gloves</option> <option>Helm</option> <option>Pants</option> <option>Mighty Belt</option> <option>Ring</option> <option>Shoulders</option> <option>Spirit Stone</option> <option>Voodoo Mask</option> <option>Wizard Hat</option> </select> </div> <div class="input-group"> <span class="Off input-group-addon" style="display: none;">Sub-Type</span> <select class="Off form-control" name="sub[4]" style="display:none;"> <option>All Off-Hand Item Types</option> <option>Mojo</option> <option>Source</option> <option>Quiver</option> <option>Shield</option> </select> </div>

    Read the article

  • scrolling lags in emacs 23.2 with GTK

    - by mefiX
    Hey there, I am using emacs 23.2 with the GTK toolkit. I built emacs from source using the following configure-params: ./configure --prefix=/usr --without-makeinfo --without-sound Which builds emacs with the following configuration: Where should the build process find the source code? /home/****/incoming/emacs-23.2 What operating system and machine description files should Emacs use? `s/gnu-linux.h' and `m/intel386.h' What compiler should emacs be built with? gcc -g -O2 -Wdeclaration-after-statement -Wno-pointer-sign Should Emacs use the GNU version of malloc? yes (Using Doug Lea's new malloc from the GNU C Library.) Should Emacs use a relocating allocator for buffers? yes Should Emacs use mmap(2) for buffer allocation? no What window system should Emacs use? x11 What toolkit should Emacs use? GTK Where do we find X Windows header files? Standard dirs Where do we find X Windows libraries? Standard dirs Does Emacs use -lXaw3d? no Does Emacs use -lXpm? yes Does Emacs use -ljpeg? yes Does Emacs use -ltiff? yes Does Emacs use a gif library? yes -lgif Does Emacs use -lpng? yes Does Emacs use -lrsvg-2? no Does Emacs use -lgpm? yes Does Emacs use -ldbus? yes Does Emacs use -lgconf? no Does Emacs use -lfreetype? yes Does Emacs use -lm17n-flt? no Does Emacs use -lotf? yes Does Emacs use -lxft? yes Does Emacs use toolkit scroll bars? yes When I'm scrolling within files of a common size (about 1000 lines) holding the up/down-keys, emacs almost hangs and produces about 50% CPU-load. I use the following plugins: ido linum tabbar auto-complete-config Starting emacs with -q fixes the problem, but then I don't have any plugins. I can't figure out, which part of my .emacs is responsible for this behaviour. Here's an excerpt of my .emacs-file: (require 'ido) (ido-mode 1) (require 'linum) (global-linum-mode 1) (require 'tabbar) (tabbar-mode 1) (tabbar-local-mode 0) (tabbar-mwheel-mode 0) (setq tabbar-buffer-groups-function (lambda () (list "All"))) (global-set-key [M-left] 'tabbar-backward) (global-set-key [M-right] 'tabbar-forward) ;; hide the toolbar (gtk etc.) (tool-bar-mode -1) ;; Mouse scrolling enhancements (setq mouse-wheel-progressive-speed nil) (setq mouse-wheel-scroll-amount '(5 ((shift) . 5) ((control) . nil))) ;; Smart-HOME (defun smart-beginning-of-line () "Forces the cursor to jump to the first none whitespace char of the current line when pressing HOME" (interactive) (let ((oldpos (point))) (back-to-indentation) (and (= oldpos (point)) (beginning-of-line)))) (put 'smart-beginning-of-line 'CUA 'move) (global-set-key [home] 'smart-beginning-of-line) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(column-number-mode t) '(cua-mode t nil (cua-base)) '(custom-buffer-indent 4) '(delete-selection-mode nil) '(display-time-24hr-format t) '(display-time-day-and-date 1) '(display-time-mode t) '(global-font-lock-mode t nil (font-lock)) '(inhibit-startup-buffer-menu t) '(inhibit-startup-screen t) '(pc-select-meta-moves-sexps t) '(pc-select-selection-keys-only t) '(pc-selection-mode t nil (pc-select)) '(scroll-bar-mode (quote right)) '(show-paren-mode t) '(standard-indent 4) '(uniquify-buffer-name-style (quote forward) nil (uniquify))) (setq-default tab-width 4) (setq-default indent-tabs-mode t) (setq c-basic-offset 4) ;; Highlighting of the current line (global-hl-line-mode 1) (set-face-background 'hl-line "#E8F2FE") (defalias 'yes-or-no-p 'y-or-n-p) (display-time) (set-language-environment "Latin-1") ;; Change cursor color according to mode (setq djcb-read-only-color "gray") ;; valid values are t, nil, box, hollow, bar, (bar . WIDTH), hbar, ;; (hbar. HEIGHT); see the docs for set-cursor-type (setq djcb-read-only-cursor-type 'hbar) (setq djcb-overwrite-color "red") (setq djcb-overwrite-cursor-type 'box) (setq djcb-normal-color "black") (setq djcb-normal-cursor-type 'bar) (defun djcb-set-cursor-according-to-mode () "change cursor color and type according to some minor modes." (cond (buffer-read-only (set-cursor-color djcb-read-only-color) (setq cursor-type djcb-read-only-cursor-type)) (overwrite-mode (set-cursor-color djcb-overwrite-color) (setq cursor-type djcb-overwrite-cursor-type)) (t (set-cursor-color djcb-normal-color) (setq cursor-type djcb-normal-cursor-type)))) (add-hook 'post-command-hook 'djcb-set-cursor-according-to-mode) (define-key global-map '[C-right] 'forward-sexp) (define-key global-map '[C-left] 'backward-sexp) (define-key global-map '[s-left] 'windmove-left) (define-key global-map '[s-right] 'windmove-right) (define-key global-map '[s-up] 'windmove-up) (define-key global-map '[s-down] 'windmove-down) (define-key global-map '[S-down-mouse-1] 'mouse-stay-and-copy) (define-key global-map '[C-M-S-down-mouse-1] 'mouse-stay-and-swap) (define-key global-map '[S-mouse-2] 'mouse-yank-and-kill) (define-key global-map '[C-S-down-mouse-1] 'mouse-stay-and-kill) (define-key global-map "\C-a" 'mark-whole-buffer) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(default ((t (:inherit nil :stipple nil :background "#f7f9fa" :foreground "#191919" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 98 :width normal :foundry "unknown" :family "DejaVu Sans Mono")))) '(font-lock-builtin-face ((((class color) (min-colors 88) (background light)) (:foreground "#642880" :weight bold)))) '(font-lock-comment-face ((((class color) (min-colors 88) (background light)) (:foreground "#3f7f5f")))) '(font-lock-constant-face ((((class color) (min-colors 88) (background light)) (:weight bold)))) '(font-lock-doc-face ((t (:inherit font-lock-string-face :foreground "#3f7f5f")))) '(font-lock-function-name-face ((((class color) (min-colors 88) (background light)) (:foreground "Black" :weight bold)))) '(font-lock-keyword-face ((((class color) (min-colors 88) (background light)) (:foreground "#7f0055" :weight bold)))) '(font-lock-preprocessor-face ((t (:inherit font-lock-builtin-face :foreground "#7f0055" :weight bold)))) '(font-lock-string-face ((((class color) (min-colors 88) (background light)) (:foreground "#0000c0")))) '(font-lock-type-face ((((class color) (min-colors 88) (background light)) (:foreground "#7f0055" :weight bold)))) '(font-lock-variable-name-face ((((class color) (min-colors 88) (background light)) (:foreground "Black")))) '(minibuffer-prompt ((t (:foreground "medium blue")))) '(mode-line ((t (:background "#222222" :foreground "White")))) '(tabbar-button ((t (:inherit tabbar-default :foreground "dark red")))) '(tabbar-button-highlight ((t (:inherit tabbar-default :background "white" :box (:line-width 2 :color "white"))))) '(tabbar-default ((t (:background "gray90" :foreground "gray50" :box (:line-width 3 :color "gray90") :height 100)))) '(tabbar-highlight ((t (:underline t)))) '(tabbar-selected ((t (:inherit tabbar-default :foreground "blue" :weight bold)))) '(tabbar-separator ((t nil))) '(tabbar-unselected ((t (:inherit tabbar-default))))) Any suggestions? Kind regards, mefiX

    Read the article

  • How to optimize dynamic programming?

    - by Chan
    Problem A number is called lucky if the sum of its digits, as well as the sum of the squares of its digits is a prime number. How many numbers between A and B are lucky? Input: The first line contains the number of test cases T. Each of the next T lines contains two integers, A and B. Output: Output T lines, one for each case containing the required answer for the corresponding case. Constraints: 1 <= T <= 10000 1 <= A <= B <= 10^18 Sample Input: 2 1 20 120 130 Sample Output: 4 1 Explanation: For the first case, the lucky numbers are 11, 12, 14, 16. For the second case, the only lucky number is 120. The problem is quite simple if we use brute force, however the running time is so critical that my program failed most test cases. My current idea is to use dynamic programming by storing the previous sum in a temporary array, so for example: sum_digits(10) = 1 -> sum_digits(11) = sum_digits(10) + 1 The same idea is applied for sum square but with counter equals to odd numbers. Unfortunately, it still failed 9 of 10 test cases which makes me think there must be a better way to solve it. Any idea would be greatly appreciated. #include <iostream> #include <vector> #include <string> #include <algorithm> #include <unordered_map> #include <unordered_set> #include <cmath> #include <cassert> #include <bitset> using namespace std; bool prime_table[1540] = { 0, 0, 1, 1, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 }; unsigned num_digits(long long i) { return i > 0 ? (long) log10 ((double) i) + 1 : 1; } void get_sum_and_sum_square_digits(long long n, int& sum, int& sum_square) { sum = 0; sum_square = 0; int digit; while (n) { digit = n % 10; sum += digit; sum_square += digit * digit; n /= 10; } } void init_digits(long long n, long long previous_sum[], const int size = 18) { int current_no_digits = num_digits(n); int digit; for (int i = 0; i < current_no_digits; ++i) { digit = n % 10; previous_sum[i] = digit; n /= 10; } for (int i = current_no_digits; i <= size; ++i) { previous_sum[i] = 0; } } void display_previous(long long previous[]) { for (int i = 0; i < 18; ++i) { cout << previous[i] << ","; } } int count_lucky_number(long long A, long long B) { long long n = A; long long end = B; int sum = 0; int sum_square = 0; int lucky_counter = 0; get_sum_and_sum_square_digits(n, sum, sum_square); long long sum_counter = sum; long long sum_square_counter = sum_square; if (prime_table[sum_counter] && prime_table[sum_square_counter]) { lucky_counter++; } long long previous_sum[19] = {1}; init_digits(n, previous_sum); while (n < end) { n++; if (n % 100000000000000000 == 0) { previous_sum[17]++; sum_counter = previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[16] = 0; previous_sum[15] = 0; previous_sum[14] = 0; previous_sum[13] = 0; previous_sum[12] = 0; previous_sum[11] = 0; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 10000000000000000 == 0) { previous_sum[16]++; sum_counter = previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[15] = 0; previous_sum[14] = 0; previous_sum[13] = 0; previous_sum[12] = 0; previous_sum[11] = 0; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 1000000000000000 == 0) { previous_sum[15]++; sum_counter = previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[14] = 0; previous_sum[13] = 0; previous_sum[12] = 0; previous_sum[11] = 0; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 100000000000000 == 0) { previous_sum[14]++; sum_counter = previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[13] = 0; previous_sum[12] = 0; previous_sum[11] = 0; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 10000000000000 == 0) { previous_sum[13]++; sum_counter = previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[12] = 0; previous_sum[11] = 0; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 1000000000000 == 0) { previous_sum[12]++; sum_counter = previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[11] = 0; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 100000000000 == 0) { previous_sum[11]++; sum_counter = previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[10] = 0; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 10000000000 == 0) { previous_sum[10]++; sum_counter = previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[9] = 0; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 1000000000 == 0) { previous_sum[9]++; sum_counter = previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[8] = 0; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 100000000 == 0) { previous_sum[8]++; sum_counter = previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[7] = 0; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 10000000 == 0) { previous_sum[7]++; sum_counter = previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[6] = 0; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 1000000 == 0) { previous_sum[6]++; sum_counter = previous_sum[6] + previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[6] * previous_sum[6] + previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[5] = 0; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 100000 == 0) { previous_sum[5]++; sum_counter = previous_sum[5] + previous_sum[6] + previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[5] * previous_sum[5] + previous_sum[6] * previous_sum[6] + previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[4] = 0; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 10000 == 0) { previous_sum[4]++; sum_counter = previous_sum[4] + previous_sum[5] + previous_sum[6] + previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[4] * previous_sum[4] + previous_sum[5] * previous_sum[5] + previous_sum[6] * previous_sum[6] + previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[3] = 0; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 1000 == 0) { previous_sum[3]++; sum_counter = previous_sum[3] + previous_sum[4] + previous_sum[5] + previous_sum[6] + previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[3] * previous_sum[3] + previous_sum[4] * previous_sum[4] + previous_sum[5] * previous_sum[5] + previous_sum[6] * previous_sum[6] + previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[2] = 0; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 100 == 0) { previous_sum[2]++; sum_counter = previous_sum[2] + previous_sum[3] + previous_sum[4] + previous_sum[5] + previous_sum[6] + previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[2] * previous_sum[2] + previous_sum[3] * previous_sum[3] + previous_sum[4] * previous_sum[4] + previous_sum[5] * previous_sum[5] + previous_sum[6] * previous_sum[6] + previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[1] = 0; previous_sum[0] = 0; } else if (n % 10 == 0) { previous_sum[1]++; sum_counter = previous_sum[1] + previous_sum[2] + previous_sum[3] + previous_sum[4] + previous_sum[5] + previous_sum[6] + previous_sum[7] + previous_sum[8] + previous_sum[9] + previous_sum[10] + previous_sum[11] + previous_sum[12] + previous_sum[13] + previous_sum[14] + previous_sum[15] + previous_sum[16] + previous_sum[17] + previous_sum[18]; sum_square_counter = previous_sum[1] * previous_sum[1] + previous_sum[2] * previous_sum[2] + previous_sum[3] * previous_sum[3] + previous_sum[4] * previous_sum[4] + previous_sum[5] * previous_sum[5] + previous_sum[6] * previous_sum[6] + previous_sum[7] * previous_sum[7] + previous_sum[8] * previous_sum[8] + previous_sum[9] * previous_sum[9] + previous_sum[10] * previous_sum[10] + previous_sum[11] * previous_sum[11] + previous_sum[12] * previous_sum[12] + previous_sum[13] * previous_sum[13] + previous_sum[14] * previous_sum[14] + previous_sum[15] * previous_sum[15] + previous_sum[16] * previous_sum[16] + previous_sum[17] * previous_sum[17] + previous_sum[18] * previous_sum[18]; previous_sum[0] = 0; } else { sum_counter++; sum_square_counter += ((n - 1) % 10) * 2 + 1; } // get_sum_and_sum_square_digits(n, sum, sum_square); // assert(sum == sum_counter && sum_square == sum_square_counter); if (prime_table[sum_counter] && prime_table[sum_square_counter]) { lucky_counter++; } } return lucky_counter; } void inout_lucky_numbers() { int n; cin >> n; long long a; long long b; while (n--) { cin >> a >> b; cout << count_lucky_number(a, b) << endl; } } int main() { inout_lucky_numbers(); return 0; }

    Read the article

  • How to correctly populate records from SQLlite in ListActivity?

    - by Pavel
    Hi. Can someone please tell me how can I easily display every record from sqllite in ListActivity tab? I'm kinda confused with this. Do I have to create db from my helper class in TabActivity or ListActivity or both? My db helper class is as follow: package tabs.app; import android.content.ContentValues; import android.content.Context; import android.database.Cursor; import android.database.SQLException; import android.database.sqlite.SQLiteDatabase; import android.database.sqlite.SQLiteOpenHelper; import android.util.Log; public class DBAdapter { private static String DB_PATH = "/data/data/tabs.app/databases/"; public static final String KEY_ROWID = "_id"; public static final String KEY_LATITUDE = "latitude"; public static final String KEY_LONGITUDE = "longitude"; private static final String TAG = "DBAdapter"; private static final String DATABASE_NAME = "coords"; private static final String DATABASE_TABLE = "coordsStorages"; private static final int DATABASE_VERSION = 2; /* private static final String DATABASE_CREATE = "create table coordsStorage (_id integer primary key autoincrement, latitude integer not null, longitude integer not null)"; */ public Context context; private DatabaseHelper DBHelper; private SQLiteDatabase db; public DBAdapter(Context ctx) { this.context = ctx; DBHelper = new DatabaseHelper(context); } private static class DatabaseHelper extends SQLiteOpenHelper { DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); } @Override public void onCreate(SQLiteDatabase db) { db.execSQL("create table coordsStorages (_id integer primary key autoincrement, latitude integer not null, longitude integer not null)"); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { Log.w(TAG, "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS titles"); onCreate(db); } } //---opens the database--- public DBAdapter open() throws SQLException { db = DBHelper.getWritableDatabase(); return this; } //---closes the database--- public void close() { DBHelper.close(); } //---insert a title into the database--- public long insertCoords(int latitude, int longitude) { ContentValues initialValues = new ContentValues(); initialValues.put(KEY_LATITUDE, latitude); initialValues.put(KEY_LONGITUDE, longitude); return db.insert(DATABASE_TABLE, null, initialValues); } public void openDataBase() throws SQLException{ //Open the database String myPath = DB_PATH + DATABASE_NAME; db = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READONLY); } //---deletes a particular title--- public boolean deleteTitle(long rowId) { return db.delete(DATABASE_TABLE, KEY_ROWID + "=" + rowId, null) > 0; } //---retrieves all the titles--- public Cursor getAllTitles() { return db.query(DATABASE_TABLE, new String[] { KEY_ROWID, KEY_LATITUDE, KEY_LONGITUDE}, null, null, null, null, null); } //---retrieves a particular title--- public Cursor getTitle(long rowId) throws SQLException { Cursor mCursor = db.query(true, DATABASE_TABLE, new String[] { KEY_ROWID, KEY_LATITUDE, KEY_LONGITUDE}, KEY_ROWID + "=" + rowId, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } //---updates a title--- /*public boolean updateTitle(long rowId, int latitude, int longitude) { ContentValues args = new ContentValues(); args.put(KEY_LATITUDE, latitude); args.put(KEY_LONGITUDE, longitude); return db.update(DATABASE_TABLE, args, KEY_ROWID + "=" + rowId, null) > 0; }*/ } And Im trying to retrieve the records in TabActivity like this: public class Areas extends ListActivity { DBAdapter db; SimpleCursorAdapter mAdapter; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.areas_layout); db = new DBAdapter(this); db.open(); Cursor c = db.getAllTitles(); startManagingCursor(c); String[] display = new String[] { db.KEY_LATITUDE }; int[] to = new int[] { R.id.row_latitude}; /* String[] display2 = new String[] { db.KEY_LONGITUDE }; int[] to2 = new int[] { R.id.row_longitude};*/ mAdapter = new SimpleCursorAdapter(this, R.layout.areas_layout, c, display, to); setListAdapter(mAdapter); /* mAdapter2 = new SimpleCursorAdapter(this, R.layout.areas_layout, c, display2, to2); setListAdapter(mAdapter2);*/ db.close(); } /* private void fillData() { // Get all of the rows from the database and create the item list Cursor c = db.getAllTitles(); startManagingCursor(c); }*/ } Whenever I'm trying to do that the error log outputs this: 06-07 09:51:56.529: ERROR/AndroidRuntime(2034): Uncaught handler: thread main exiting due to uncaught exception 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): java.lang.RuntimeException: Unable to start activity ComponentInfo{tabs.app/tabs.app.Areas}: java.lang.RuntimeException: Your content must have a ListView whose id attribute is 'android.R.id.list' 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2401) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.ActivityThread.startActivityNow(ActivityThread.java:2242) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.LocalActivityManager.moveToState(LocalActivityManager.java:127) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.LocalActivityManager.startActivity(LocalActivityManager.java:339) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.widget.TabHost$IntentContentStrategy.getContentView(TabHost.java:631) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.widget.TabHost.setCurrentTab(TabHost.java:317) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.widget.TabHost$2.onTabSelectionChanged(TabHost.java:127) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.widget.TabWidget$TabClickListener.onClick(TabWidget.java:346) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.View.performClick(View.java:2344) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.View.onTouchEvent(View.java:4133) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.View.dispatchTouchEvent(View.java:3672) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:850) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:882) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:882) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:882) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:882) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:882) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:882) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1712) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1202) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.Activity.dispatchTouchEvent(Activity.java:1987) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1696) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.view.ViewRoot.handleMessage(ViewRoot.java:1658) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.os.Handler.dispatchMessage(Handler.java:99) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.os.Looper.loop(Looper.java:123) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.ActivityThread.main(ActivityThread.java:4203) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at java.lang.reflect.Method.invokeNative(Native Method) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at java.lang.reflect.Method.invoke(Method.java:521) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at dalvik.system.NativeStart.main(Native Method) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): Caused by: java.lang.RuntimeException: Your content must have a ListView whose id attribute is 'android.R.id.list' 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.ListActivity.onContentChanged(ListActivity.java:236) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at com.android.internal.policy.impl.PhoneWindow.setContentView(PhoneWindow.java:316) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.Activity.setContentView(Activity.java:1620) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at tabs.app.Areas.onCreate(Areas.java:18) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1123) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2364) 06-07 09:51:56.559: ERROR/AndroidRuntime(2034): ... 30 more 06-07 09:51:56.619: INFO/Process(51): Sending signal. PID: 2034 SIG: 3 06-07 09:51:56.619: INFO/dalvikvm(2034): threadid=7: reacting to signal 3 06-07 09:51:56.619: ERROR/dalvikvm(2034): Unable to open stack trace file '/data/anr/traces.txt': Permission denied Can someone please tell me what I'm doing wrong? Help greatly appreciated!

    Read the article

  • Avoid Jquery Plugin Conflict

    - by user1511579
    on the same page i'm using this plugin: $g=jQuery.noConflict(); $g(function() { /* number of fieldsets */ var fieldsetCount = $g('#formElem').children().length; /* current position of fieldset / navigation link */ var current = 1; /* sum and save the widths of each one of the fieldsets set the final sum as the total width of the steps element */ var stepsWidth = 0; var widths = new Array(); $g('#steps .step').each(function(i){ var $step = $g(this); widths[i]   = stepsWidth; stepsWidth += $step.width(); }); $g('#steps').width(stepsWidth); /* to avoid problems in IE, focus the first input of the form */ $g('#formElem').children(':first').find(':input:first').focus(); /* show the navigation bar */ $g('#navigation_form').show(); /* when clicking on a navigation link  the form slides to the corresponding fieldset */ $g('#navigation_form a').bind('click',function(e){ var $this = $g(this); var prev = current; $this.closest('ul').find('li').removeClass('selected'); $this.parent().addClass('selected'); /* we store the position of the link in the current variable */ current = $this.parent().index() + 1; /* animate / slide to the next or to the corresponding fieldset. The order of the links in the navigation is the order of the fieldsets. Also, after sliding, we trigger the focus on the first  input element of the new fieldset If we clicked on the last link (confirmation), then we validate all the fieldsets, otherwise we validate the previous one before the form slided */ $g('#steps').stop().animate({ marginLeft: '-' + widths[current-1] + 'px' },500,function(){ if(current == fieldsetCount) validateSteps(); else validateStep(prev); $g('#formElem').children(':nth-child('+ parseInt(current) +')').find(':input:first').focus(); }); e.preventDefault(); }); /* clicking on the tab (on the last input of each fieldset), makes the form slide to the next step */ $g('#formElem > fieldset').each(function(){ var $fieldset = $g(this); $fieldset.children(':last').find(':input').keydown(function(e){ if (e.which == 9){ $g('#navigation_form li:nth-child(' + (parseInt(current)+1) + ') a').click(); /* force the blur for validation */ $g(this).blur(); e.preventDefault(); } }); }); /* validates errors on all the fieldsets records if the Form has errors in $('#formElem').data() */ function validateSteps(){ var FormErrors = false; for(var i = 1; i < fieldsetCount; ++i){ var error = validateStep(i); if(error == -1) FormErrors = true; } $g('#formElem').data('errors',FormErrors); } /* validates one fieldset and returns -1 if errors found, or 1 if not */ function validateStep(step){ if(step == fieldsetCount) return; var error = 1; var hasError = false; $g('#formElem').children(':nth-child('+ parseInt(step) +')').find(':input:not(button)').each(function(){ var $this = $g(this); var valueLength = jQuery.trim($this.val()).length; if(valueLength == ''){ hasError = true; $this.css('background-color','#FFEDEF'); } else $this.css('background-color','#FFFFFF'); }); var $link = $g('#navigation_form li:nth-child(' + parseInt(step) + ') a'); $link.parent().find('.error,.checked').remove(); var valclass = 'checked'; if(hasError){ error = -1; valclass = 'error'; } $g('<span class="'+valclass+'"></span>').insertAfter($link); return error; } /* if there are errors don't allow the user to submit */ $g('#registerButton').bind('click',function(){ if($g('#formElem').data('errors')){ alert('Please correct the errors in the Form'); return false; } }); }); and this one: (function($){ $countCursos = 1; $countFormsA = 1; $countFormsB = 1; $.fn.addForms = function(idform){ var adicionar_curso = "<p>"+ " <label for='nome_curso'>Nome do Curso</label>"+ " <input id='nome_curso' name='nome_curso["+$countCursos+"]' type='text' />"+ " </p>"; var myform2 = "<table>"+ " <tr>"+ " <td>Field C</td>"+ " <td><input type='text' name='fieldc["+$countFormsA+"]'></td>"+ " <td>Field D ("+$countFormsA+"):</td>"+ " <td><textarea name='fieldd["+$countFormsA+"]'></textarea></td>"+ " <td><button>remove</button></td>"+ " </tr>"+ "</table>"; var myform3 = "<table>"+ " <tr>"+ " <td>Field C</td>"+ " <td><input type='text' name='fieldc["+$countFormsB+"]'></td>"+ " <td>Field D ("+$countFormsB+"):</td>"+ " <td><textarea name='fieldd["+$countFormsB+"]'></textarea></td>"+ " <td><button>remove</button></td>"+ " </tr>"+ "</table>"; if(idform=='novo_curso'){ alert(idform); adicionar_curso = $("<div>"+adicionar_curso+"</div>"); $("button", $(adicionar_curso)).click(function(){ $(this).parent().parent().remove(); }); $(this).append(adicionar_curso); $countCursos++; } if(idform=='mybutton1'){ alert(idform); myform2 = $("<div>"+myform2+"</div>"); $("button", $(myform2)).click(function(){ $(this).parent().parent().remove(); }); $(this).append(myform2); $countFormsA++; } if(idform=='mybutton2'){ alert(idform); myform3 = $("<div>"+myform3+"</div>"); $("button", $(myform3)).click(function(){ $(this).parent().parent().remove(); }); $(this).append(myform3); $countFormsB++; } }; })(jQuery); $(function(){ $("#mybutton1").bind("click", function(e){ e.preventDefault(); var idform=this.id; if($countFormsA<3){ $("#container1").addForms(idform); } }); }); $(function(){ $("#novo_curso").bind("click", function(e){ e.preventDefault(); var idform=this.id; alert(idform); if($countCursos<3){ $("#outro_curso").addForms(idform); } }); }); $(function(){ $("#mybutton2").bind("click", function(e){ e.preventDefault(); var idform=this.id; if($countFormsB<3){ $("#container2").addForms(idform); } }); }); My problem is the two are making conflict: I added previously the $g on the first to avoid conflict, but the truth is they don't work together, any hint how can i configure the second one to avoid this? Thanks in advance!

    Read the article

  • RHEL - blocked FC remote port time out: saving binding

    - by Dev G
    My Server went into a faulty state since the database could not write on the partition. I found out that the partition went into Read Only mode. Finally to fix it, I had to do a hard reboot. Linux 2.6.18-164.el5PAE #1 SMP Tue Aug 18 15:59:11 EDT 2009 i686 i686 i386 GNU/Linux /var/log/messages Oct 31 00:56:45 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 00:57:05 ota3g1 Had[17275]: VCS CRITICAL V-16-1-50086 CPU usage on ota3g1.mtsallstream.com is 100% Oct 31 01:01:47 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:06:50 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:11:52 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x2 received Data: x2 x20 x80000 x0 x0 Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1303 Link Up Event x3 received Data: x3 x1 x10 x1 x0 x0 0 Oct 31 01:12:12 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x4 received Data: x4 x20 x80000 x0 x0 Oct 31 01:12:40 ota3g1 kernel: rport-8:0-0: blocked FC remote port time out: saving binding Oct 31 01:12:40 ota3g1 kernel: lpfc 0000:29:00.1: 1:(0):0203 Devloss timeout on WWPN 20:25:00:a0:b8:74:f5:65 NPort x0000e4 Data: x0 x7 x0 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 38617577 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283532153 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 90825 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-16. Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 868841 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-10. Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37759889 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283349449 Oct 31 01:12:40 ota3g1 kernel: printk: 6 messages suppressed. Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-12. Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 12745 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-10, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-10 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37757897 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 1097 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:41 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:41 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/cciss-root 4.9G 730M 3.9G 16% / /dev/mapper/cciss-home 9.7G 1.2G 8.1G 13% /home /dev/mapper/cciss-var 9.7G 494M 8.8G 6% /var /dev/mapper/cciss-usr 15G 2.6G 12G 19% /usr /dev/mapper/cciss-tmp 3.9G 153M 3.6G 5% /tmp /dev/sda1 996M 43M 902M 5% /boot tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/mapper/cciss-product 25G 16G 7.4G 68% /product /dev/mapper/cciss-opt 20G 4.5G 14G 25% /opt /dev/mapper/dg_db1-vol_db1_system 18G 2.2G 15G 14% /database/OTADB/sys /dev/mapper/dg_db1-vol_db1_undo 18G 5.8G 12G 35% /database/OTADB/undo /dev/mapper/dg_db1-vol_db1_redo 8.9G 4.3G 4.2G 51% /database/OTADB/redo /dev/mapper/dg_db1-vol_db1_sgbd 8.9G 654M 7.8G 8% /database/OTADB/admin /dev/mapper/dg_db1-vol_db1_arch 98G 24G 69G 26% /database/OTADB/arch /dev/mapper/dg_db1-vol_db1_indexes 240G 14G 214G 6% /database/OTADB/index /dev/mapper/dg_db1-vol_db1_data 275G 47G 215G 18% /database/OTADB/data /dev/mapper/dg_dbrman-vol_db_rman 8.9G 351M 8.1G 5% /database/RMAN /dev/mapper/dg_app1-vol_app1 151G 113G 31G 79% /files/ota /etc/fstab /dev/cciss/root / ext3 defaults 1 1 /dev/cciss/home /home ext3 defaults 1 2 /dev/cciss/var /var ext3 defaults 1 2 /dev/cciss/usr /usr ext3 defaults 1 2 /dev/cciss/tmp /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/cciss/swap swap swap defaults 0 0 /dev/cciss/product /product ext3 defaults 1 2 /dev/cciss/opt /opt ext3 defaults 1 2 /dev/dg_db1/vol_db1_system /database/OTADB/sys ext3 defaults 1 2 /dev/dg_db1/vol_db1_undo /database/OTADB/undo ext3 defaults 1 2 /dev/dg_db1/vol_db1_redo /database/OTADB/redo ext3 defaults 1 2 /dev/dg_db1/vol_db1_sgbd /database/OTADB/admin ext3 defaults 1 2 /dev/dg_db1/vol_db1_arch /database/OTADB/arch ext3 defaults 1 2 /dev/dg_db1/vol_db1_indexes /database/OTADB/index ext3 defaults 1 2 /dev/dg_db1/vol_db1_data /database/OTADB/data ext3 defaults 1 2 /dev/dg_dbrman/vol_db_rman /database/RMAN ext3 defaults 1 2 /dev/dg_app1/vol_app1 /files/ota ext3 defaults 1 2 Thanks for all the help.

    Read the article

  • ASP.NET MVC 3 - New Features

    - by imran_ku07
    Introduction:          ASP.NET MVC 3 just released by ASP.NET MVC team which includes some new features, some changes, some improvements and bug fixes. In this article, I will show you the new features of ASP.NET MVC 3. This will help you to get started using the new features of ASP.NET MVC 3. Full details of this announcement is available at Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix.   Description:       New Razor View Engine:              Razor view engine is one of the most coolest new feature in ASP.NET MVC 3. Razor is speeding things up just a little bit more. It is much smaller and lighter in size. Also it is very easy to learn. You can say ' write less, do more '. You can get start and learn more about Razor at Introducing “Razor” – a new view engine for ASP.NET.         Granular Request Validation:             Another biggest new feature in ASP.NET MVC 3 is Granular Request Validation. Default request validator will throw an exception when he see < followed by an exclamation(like <!) or < followed by the letters a through z(like <s) or & followed by a pound sign(like &#123) as a part of querystring, posted form, headers and cookie collection. In previous versions of ASP.NET MVC, you can control request validation using ValidateInputAttriubte. In ASP.NET MVC 3 you can control request validation at Model level by annotating your model properties with a new attribute called AllowHtmlAttribute. For details see Granular Request Validation in ASP.NET MVC 3.       Sessionless Controller Support:             Sessionless Controller is another great new feature in ASP.NET MVC 3. With Sessionless Controller you can easily control your session behavior for controllers. For example, you can make your HomeController's Session as Disabled or ReadOnly, allowing concurrent request execution for single user. For details see Concurrent Requests In ASP.NET MVC and HowTo: Sessionless Controller in MVC3 – what & and why?.       Unobtrusive Ajax and  Unobtrusive Client Side Validation is Supported:             Another cool new feature in ASP.NET MVC 3 is support for Unobtrusive Ajax and Unobtrusive Client Side Validation.  This feature allows separation of responsibilities within your web application by separating your html with your script. For details see Unobtrusive Ajax in ASP.NET MVC 3 and Unobtrusive Client Validation in ASP.NET MVC 3.       Dependency Resolver:             Dependency Resolver is another great feature of ASP.NET MVC 3. It allows you to register a dependency resolver that will be used by the framework. With this approach your application will not become tightly coupled and the dependency will be injected at run time. For details see ASP.NET MVC 3 Service Location.       New Helper Methods:             ASP.NET MVC 3 includes some helper methods of ASP.NET Web Pages technology that are used for common functionality. These helper methods includes: Chart, Crypto, WebGrid, WebImage and WebMail. For details of these helper methods, please see ASP.NET MVC 3 Release Notes. For using other helper methods of ASP.NET Web Pages see Using ASP.NET Web Pages Helpers in ASP.NET MVC.       Child Action Output Caching:             ASP.NET MVC 3 also includes another feature called Child Action Output Caching. This allows you to cache only a portion of the response when you are using Html.RenderAction or Html.Action. This cache can be varied by action name, action method signature and action method parameter values. For details see this.       RemoteAttribute:             ASP.NET MVC 3 allows you to validate a form field by making a remote server call through Ajax. This makes it very easy to perform remote validation at client side and quickly give the feedback to the user. For details see How to: Implement Remote Validation in ASP.NET MVC.       CompareAttribute:             ASP.NET MVC 3 includes a new validation attribute called CompareAttribute. CompareAttribute allows you to compare the values of two different properties of a model. For details see CompareAttribute in ASP.NET MVC 3.       Miscellaneous New Features:                    ASP.NET MVC 2 includes FormValueProvider, QueryStringValueProvider, RouteDataValueProvider and HttpFileCollectionValueProvider. ASP.NET MVC 3 adds two additional value providers, ChildActionValueProvider and JsonValueProvider(JsonValueProvider is not physically exist).  ChildActionValueProvider is used when you issue a child request using Html.Action and/or Html.RenderAction methods, so that your explicit parameter values in Html.Action and/or Html.RenderAction will always take precedence over other value providers. JsonValueProvider is used to model bind JSON data. For details see Sending JSON to an ASP.NET MVC Action Method Argument.           In ASP.NET MVC 3, a new property named FileExtensions added to the VirtualPathProviderViewEngine class. This property is used when looking up a view by path (and not by name), so that only views with a file extension contained in the list specified by this new property is considered. For details see VirtualPathProviderViewEngine.FileExtensions Property .           ASP.NET MVC 3 installation package also includes the NuGet Package Manager which will be automatically installed when you install ASP.NET MVC 3. NuGet makes it easy to install and update open source libraries and tools in Visual Studio. See this for details.           In ASP.NET MVC 2, client side validation will not trigger for overridden model properties. For example, if have you a Model that contains some overridden properties then client side validation will not trigger for overridden properties in ASP.NET MVC 2 but client side validation will work for overridden properties in ASP.NET MVC 3.           Client side validation is not supported for StringLengthAttribute.MinimumLength property in ASP.NET MVC 2. In ASP.NET MVC 3 client side validation will work for StringLengthAttribute.MinimumLength property.           ASP.NET MVC 3 includes new action results like HttpUnauthorizedResult, HttpNotFoundResult and HttpStatusCodeResult.           ASP.NET MVC 3 includes some new overloads of LabelFor and LabelForModel methods. For details see LabelExtensions.LabelForModel and LabelExtensions.LabelFor.           In ASP.NET MVC 3, IControllerFactory includes a new method GetControllerSessionBehavior. This method is used to get controller's session behavior. For details see IControllerFactory.GetControllerSessionBehavior Method.           In ASP.NET MVC 3, Controller class includes a new property ViewBag which is of type dynamic. This property allows you to access ViewData Dictionary using C # 4.0 dynamic features. For details see ControllerBase.ViewBag Property.           ModelMetadata includes a property AdditionalValues which is of type Dictionary. In ASP.NET MVC 3 you can populate this property using AdditionalMetadataAttribute. For details see AdditionalMetadataAttribute Class.           In ASP.NET MVC 3 you can also use MvcScaffolding to scaffold your Views and Controller. For details see Scaffold your ASP.NET MVC 3 project with the MvcScaffolding package.           If you want to convert your application from ASP.NET MVC 2 to ASP.NET MVC 3 then there is an excellent tool that automatically converts ASP.NET MVC 2 application to ASP.NET MVC 3 application. For details see MVC 3 Project Upgrade Tool.           In ASP.NET MVC 2 DisplayAttribute is not supported but in ASP.NET MVC 3 DisplayAttribute will work properly.           ASP.NET MVC 3 also support model level validation via the new IValidatableObject interface.           ASP.NET MVC 3 includes a new helper method Html.Raw. This helper method allows you to display unencoded HTML.     Summary:          In this article I showed you the new features of ASP.NET MVC 3. This will help you a lot when you start using ASP MVC 3. I also provide you the links where you can find further details. Hopefully you will enjoy this article too.  

    Read the article

  • ASP.NET MVC Paging/Sorting/Filtering using the MVCContrib Grid and Pager

    - by rajbk
    This post walks you through creating a UI for paging, sorting and filtering a list of data items. It makes use of the excellent MVCContrib Grid and Pager Html UI helpers. A sample project is attached at the bottom. Our UI will eventually look like this. The application will make use of the Northwind database. The top portion of the page has a filter area region. The filter region is enclosed in a form tag. The select lists are wired up with jQuery to auto post back the form. The page has a pager region at the top and bottom of the product list. The product list has a link to display more details about a given product. The column headings are clickable for sorting and an icon shows the sort direction. Strongly Typed View Models The views are written to expect strongly typed objects. We suffix these strongly typed objects with ViewModel since they are designed specifically for passing data down to the view.  The following listing shows the ProductViewModel. This class will be used to hold information about a Product. We use attributes to specify if the property should be hidden and what its heading in the table should be. This metadata will be used by the MvcContrib Grid to render the table. Some of the properties are hidden from the UI ([ScaffoldColumn(false)) but are needed because we will be using those for filtering when writing our LINQ query. public ActionResult Index( string productName, int? supplierID, int? categoryID, GridSortOptions gridSortOptions, int? page) {   var productList = productRepository.GetProductsProjected();   // Set default sort column if (string.IsNullOrWhiteSpace(gridSortOptions.Column)) { gridSortOptions.Column = "ProductID"; }   // Filter on SupplierID if (supplierID.HasValue) { productList = productList.Where(a => a.SupplierID == supplierID); }   // Filter on CategoryID if (categoryID.HasValue) { productList = productList.Where(a => a.CategoryID == categoryID); }   // Filter on ProductName if (!string.IsNullOrWhiteSpace(productName)) { productList = productList.Where(a => a.ProductName.Contains(productName)); }   // Create all filter data and set current values if any // These values will be used to set the state of the select list and textbox // by sending it back to the view. var productFilterViewModel = new ProductFilterViewModel(); productFilterViewModel.SelectedCategoryID = categoryID ?? -1; productFilterViewModel.SelectedSupplierID = supplierID ?? -1; productFilterViewModel.Fill();   // Order and page the product list var productPagedList = productList .OrderBy(gridSortOptions.Column, gridSortOptions.Direction) .AsPagination(page ?? 1, 10);     var productListContainer = new ProductListContainerViewModel { ProductPagedList = productPagedList, ProductFilterViewModel = productFilterViewModel, GridSortOptions = gridSortOptions };   return View(productListContainer); } The following diagram shows the rest of the key ViewModels in our design. We have a container class called ProductListContainerViewModel which has nested classes. The ProductPagedList is of type IPagination<ProductViewModel>. The MvcContrib expects the IPagination<T> interface to determine the page number and page size of the collection we are working with. You convert any IEnumerable<T> into an IPagination<T> by calling the AsPagination extension method in the MvcContrib library. It also creates a paged set of type ProductViewModel. The ProductFilterViewModel class will hold information about the different select lists and the ProductName being searched on. It will also hold state of any previously selected item in the lists and the previous search criteria (you will recall that this type of state information was stored in Viewstate when working with WebForms). With MVC there is no state storage and so all state has to be fetched and passed back to the view. The GridSortOptions is a type defined in the MvcContrib library and is used by the Grid to determine the current column being sorted on and the current sort direction. The following shows the view and partial views used to render our UI. The Index view expects a type ProductListContainerViewModel which we described earlier. <%Html.RenderPartial("SearchFilters", Model.ProductFilterViewModel); %> <% Html.RenderPartial("Pager", Model.ProductPagedList); %> <% Html.RenderPartial("SearchResults", Model); %> <% Html.RenderPartial("Pager", Model.ProductPagedList); %> The View contains a partial view “SearchFilters” and passes it the ProductViewFilterContainer. The SearchFilter uses this Model to render all the search lists and textbox. The partial view “Pager” uses the ProductPageList which implements the interface IPagination. The “Pager” view contains the MvcContrib Pager helper used to render the paging information. This view is repeated twice since we want the pager UI to be available at the top and bottom of the product list. The Pager partial view is located in the Shared directory so that it can be reused across Views. The partial view “SearchResults” uses the ProductListContainer model. This partial view contains the MvcContrib Grid which needs both the ProdctPagedList and GridSortOptions to render itself. The Controller Action An example of a request like this: /Products?productName=test&supplierId=29&categoryId=4. The application receives this GET request and maps it to the Index method of the ProductController. Within the action we create an IQueryable<ProductViewModel> by calling the GetProductsProjected() method. /// <summary> /// This method takes in a filter list, paging/sort options and applies /// them to an IQueryable of type ProductViewModel /// </summary> /// <returns> /// The return object is a container that holds the sorted/paged list, /// state for the fiters and state about the current sorted column /// </returns> public ActionResult Index( string productName, int? supplierID, int? categoryID, GridSortOptions gridSortOptions, int? page) {   var productList = productRepository.GetProductsProjected();   // Set default sort column if (string.IsNullOrWhiteSpace(gridSortOptions.Column)) { gridSortOptions.Column = "ProductID"; }   // Filter on SupplierID if (supplierID.HasValue) { productList.Where(a => a.SupplierID == supplierID); }   // Filter on CategoryID if (categoryID.HasValue) { productList = productList.Where(a => a.CategoryID == categoryID); }   // Filter on ProductName if (!string.IsNullOrWhiteSpace(productName)) { productList = productList.Where(a => a.ProductName.Contains(productName)); }   // Create all filter data and set current values if any // These values will be used to set the state of the select list and textbox // by sending it back to the view. var productFilterViewModel = new ProductFilterViewModel(); productFilterViewModel.SelectedCategoryID = categoryID ?? -1; productFilterViewModel.SelectedSupplierID = supplierID ?? -1; productFilterViewModel.Fill();   // Order and page the product list var productPagedList = productList .OrderBy(gridSortOptions.Column, gridSortOptions.Direction) .AsPagination(page ?? 1, 10);     var productListContainer = new ProductListContainerViewModel { ProductPagedList = productPagedList, ProductFilterViewModel = productFilterViewModel, GridSortOptions = gridSortOptions };   return View(productListContainer); } The supplier, category and productname filters are applied to this IQueryable if any are present in the request. The ProductPagedList class is created by applying a sort order and calling the AsPagination method. Finally the ProductListContainerViewModel class is created and returned to the view. You have seen how to use strongly typed views with the MvcContrib Grid and Pager to render a clean lightweight UI with strongly typed views. You also saw how to use partial views to get data from the strongly typed model passed to it from the parent view. The code also shows you how to use jQuery to auto post back. The sample is attached below. Don’t forget to change your connection string to point to the server containing the Northwind database. NorthwindSales_MvcContrib.zip My name is Kobayashi. I work for Keyser Soze.

    Read the article

  • Netflix, jQuery, JSONP, and OData

    - by Stephen Walther
    At the last MIX conference, Netflix announced that they are exposing their catalog of movie information using the OData protocol. This is great news! This means that you can take advantage of all of the advanced OData querying features against a live database of Netflix movies. In this blog entry, I’ll demonstrate how you can use Netflix, jQuery, JSONP, and OData to create a simple movie lookup form. The form enables you to enter a movie title, or part of a movie title, and display a list of matching movies. For example, Figure 1 illustrates the movies displayed when you enter the value robot into the lookup form.   Using the Netflix OData Catalog API You can learn about the Netflix OData Catalog API at the following website: http://developer.netflix.com/docs/oData_Catalog The nice thing about this website is that it provides plenty of samples. It also has a good general reference for OData. For example, the website includes a list of OData filter operators and functions. The Netflix Catalog API exposes 4 top-level resources: Titles – A database of Movie information including interesting movie properties such as synopsis, BoxArt, and Cast. People – A database of people information including interesting information such as Awards, TitlesDirected, and TitlesActedIn. Languages – Enables you to get title information in different languages. Genres – Enables you to get title information for specific movie genres. OData is REST based. This means that you can perform queries by putting together the right URL. For example, if you want to get a list of the movies that were released after 2010 and that had an average rating greater than 4 then you can enter the following URL in the address bar of your browser: http://odata.netflix.com/Catalog/Titles?$filter=ReleaseYear gt 2010&AverageRating gt 4 Entering this URL returns the movies in Figure 2. Creating the Movie Lookup Form The complete code for the Movie Lookup form is contained in Listing 1. Listing 1 – MovieLookup.htm <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Netflix with jQuery</title> <style type="text/css"> #movieTemplateContainer div { width:400px; padding: 10px; margin: 10px; border: black solid 1px; } </style> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> </head> <body> <label>Search Movies:</label> <input id="movieName" size="50" /> <button id="btnLookup">Lookup</button> <div id="movieTemplateContainer"></div> <script id="movieTemplate" type="text/html"> <div> <img src="<%=BoxArtSmallUrl %>" /> <strong><%=Name%></strong> <p> <%=Synopsis %> </p> </div> </script> <script type="text/javascript"> $("#btnLookup").click(function () { // Build OData query var movieName = $("#movieName").val(); var query = "http://odata.netflix.com/Catalog" // netflix base url + "/Titles" // top-level resource + "?$filter=substringof('" + escape(movieName) + "',Name)" // filter by movie name + "&$callback=callback" // jsonp request + "&$format=json"; // json request // Make JSONP call to Netflix $.ajax({ dataType: "jsonp", url: query, jsonpCallback: "callback", success: callback }); }); function callback(result) { // unwrap result var movies = result["d"]["results"]; // show movies in template var showMovie = tmpl("movieTemplate"); var html = ""; for (var i = 0; i < movies.length; i++) { // flatten movie movies[i].BoxArtSmallUrl = movies[i].BoxArt.SmallUrl; // render with template html += showMovie(movies[i]); } $("#movieTemplateContainer").html(html); } </script> </body> </html> The HTML page in Listing 1 includes two JavaScript libraries: <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> The first script tag retrieves jQuery from the Microsoft Ajax CDN. You can learn more about the Microsoft Ajax CDN by visiting the following website: http://www.asp.net/ajaxLibrary/cdn.ashx The second script tag is used to reference Resig’s micro-templating library. Because I want to use a template to display each movie, I need this library: http://ejohn.org/blog/javascript-micro-templating/ When you enter a value into the Search Movies input field and click the button, the following JavaScript code is executed: // Build OData query var movieName = $("#movieName").val(); var query = "http://odata.netflix.com/Catalog" // netflix base url + "/Titles" // top-level resource + "?$filter=substringof('" + escape(movieName) + "',Name)" // filter by movie name + "&$callback=callback" // jsonp request + "&$format=json"; // json request // Make JSONP call to Netflix $.ajax({ dataType: "jsonp", url: query, jsonpCallback: "callback", success: callback }); This code Is used to build a query that will be executed against the Netflix Catalog API. For example, if you enter the search phrase King Kong then the following URL is created: http://odata.netflix.com/Catalog/Titles?$filter=substringof(‘King%20Kong’,Name)&$callback=callback&$format=json This query includes the following parameters: $filter – You assign a filter expression to this parameter to filter the movie results. $callback – You assign the name of a JavaScript callback method to this parameter. OData calls this method to return the movie results. $format – you assign either the value json or xml to this parameter to specify how the format of the movie results. Notice that all of the OData parameters -- $filter, $callback, $format -- start with a dollar sign $. The Movie Lookup form uses JSONP to retrieve data across the Internet. Because WCF Data Services supports JSONP, and Netflix uses WCF Data Services to expose movies using the OData protocol, you can use JSONP when interacting with the Netflix Catalog API. To learn more about using JSONP with OData, see Pablo Castro’s blog: http://blogs.msdn.com/pablo/archive/2009/02/25/adding-support-for-jsonp-and-url-controlled-format-to-ado-net-data-services.aspx The actual JSONP call is performed by calling the $.ajax() method. When this call successfully completes, the JavaScript callback() method is called. The callback() method looks like this: function callback(result) { // unwrap result var movies = result["d"]["results"]; // show movies in template var showMovie = tmpl("movieTemplate"); var html = ""; for (var i = 0; i < movies.length; i++) { // flatten movie movies[i].BoxArtSmallUrl = movies[i].BoxArt.SmallUrl; // render with template html += showMovie(movies[i]); } $("#movieTemplateContainer").html(html); } The movie results from Netflix are passed to the callback method. The callback method takes advantage of Resig’s micro-templating library to display each of the movie results. A template used to display each movie is passed to the tmpl() method. The movie template looks like this: <script id="movieTemplate" type="text/html"> <div> <img src="<%=BoxArtSmallUrl %>" /> <strong><%=Name%></strong> <p> <%=Synopsis %> </p> </div> </script>   This template looks like a server-side ASP.NET template. However, the template is rendered in the client (browser) instead of the server. Summary The goal of this blog entry was to demonstrate how well jQuery works with OData. We managed to use a number of interesting open-source libraries and open protocols while building the Movie Lookup form including jQuery, JSONP, JSON, and OData.

    Read the article

  • Adding the New HTML Editor Extender to a Web Forms Application using NuGet

    - by Stephen Walther
    The July 2011 release of the Ajax Control Toolkit includes a new, lightweight, HTML5 compatible HTML Editor extender. In this blog entry, I explain how you can take advantage of NuGet to quickly add the new HTML Editor control extender to a new or existing ASP.NET Web Forms application. Installing the Latest Version of the Ajax Control Toolkit with NuGet NuGet is a package manager. It enables you to quickly install new software directly from within Visual Studio 2010. You can use NuGet to install additional software when building any type of .NET application including ASP.NET Web Forms and ASP.NET MVC applications. If you have not already installed NuGet then you can install NuGet by navigating to the following address and clicking the giant install button: http://nuget.org/ After you install NuGet, you can add the Ajax Control Toolkit to a new or existing ASP.NET Web Forms application by selecting the Visual Studio menu option Tools, Library Package Manager, Package Manager Console: Selecting this menu option opens the Package Manager Console. You can enter the command Install-Package AjaxControlToolkit in the console to install the Ajax Control Toolkit: After you install the Ajax Control Toolkit with NuGet, your application will include an assembly reference to the AjaxControlToolkit.dll and SanitizerProviders.dll assemblies: Furthermore, your Web.config file will be updated to contain a new tag prefix for the Ajax Control Toolkit controls: <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <pages> <controls> <add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" /> </controls> </pages> </system.web> </configuration> The configuration file installed by NuGet adds the prefix ajaxToolkit for all of the Ajax Control Toolkit controls. You can type ajaxToolkit: in source view to get auto-complete in Source view. You can, of course, change this prefix to anything you want. Using the HTML Editor Extender After you install the Ajax Control Toolkit, you can use the HTML Editor Extender with the standard ASP.NET TextBox control to enable users to enter rich formatting such as bold, underline, italic, different fonts, and different background and foreground colors. For example, the following page can be used for entering comments. The page contains a standard ASP.NET TextBox, Button, and Label control. When you click the button, any text entered into the TextBox is displayed in the Label control. It is a pretty boring page: Let’s make this page fancier by extending the standard ASP.NET TextBox with the HTML Editor extender control: Notice that the ASP.NET TextBox now has a toolbar which includes buttons for performing various kinds of formatting. For example, you can change the size and font used for the text. You also can change the foreground and background color – and make many other formatting changes. You can customize the toolbar buttons which the HTML Editor extender displays. To learn how to customize the toolbar, see the HTML Editor Extender sample page here: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/HTMLEditorExtender/HTMLEditorExtender.aspx Here’s the source code for the ASP.NET page: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="WebApplication1.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>Add Comments</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="TSM1" runat="server" /> <asp:TextBox ID="txtComments" TextMode="MultiLine" Columns="50" Rows="8" Runat="server" /> <ajaxToolkit:HtmlEditorExtender ID="hee" TargetControlID="txtComments" Runat="server" /> <br /><br /> <asp:Button ID="btnSubmit" Text="Add Comment" Runat="server" onclick="btnSubmit_Click" /> <hr /> <asp:Label ID="lblComment" Runat="server" /> </div> </form> </body> </html> Notice that the page above contains 5 controls. The page contains a standard ASP.NET TextBox, Button, and Label control. However, the page also contains an Ajax Control Toolkit ToolkitScriptManager control and HtmlEditorExtender control. The HTML Editor extender control extends the standard ASP.NET TextBox control. The HTML Editor TargetID attribute points at the TextBox control. Here’s the code-behind for the page above:   using System; namespace WebApplication1 { public partial class Default : System.Web.UI.Page { protected void btnSubmit_Click(object sender, EventArgs e) { lblComment.Text = txtComments.Text; } } }   Preventing XSS/JavaScript Injection Attacks If you use an HTML Editor -- any HTML Editor -- in a public facing web page then you are opening your website up to Cross-Site Scripting (XSS) attacks. An evil hacker could submit HTML using the HTML Editor which contains JavaScript that steals private information such as other user’s passwords. Imagine, for example, that you create a web page which enables your customers to post comments about your website. Furthermore, imagine that you decide to redisplay the comments so every user can see them. In that case, a malicious user could submit JavaScript which displays a dialog asking for a user name and password. When an unsuspecting customer enters their secret password, the script could transfer the password to the hacker’s website. So how do you accept HTML content without opening your website up to JavaScript injection attacks? The Ajax Control Toolkit HTML Editor supports the Anti-XSS library. You can use the Anti-XSS library to sanitize any HTML content. The Anti-XSS library, for example, strips away all JavaScript automatically. You can download the Anti-XSS library from NuGet. Open the Package Manager Console and execute the command Install-Package AntiXSS: Adding the Anti-XSS library to your application adds two assemblies to your application named AntiXssLibrary.dll and HtmlSanitizationLibrary.dll. After you install the Anti-XSS library, you can configure the HTML Editor extender to use the Anti-XSS library your application’s web.config file: <?xml version="1.0" encoding="utf-8"?> <configuration> <configSections> <sectionGroup name="system.web"> <section name="sanitizer" requirePermission="false" type="AjaxControlToolkit.Sanitizer.ProviderSanitizerSection, AjaxControlToolkit"/> </sectionGroup> </configSections> <system.web> <sanitizer defaultProvider="AntiXssSanitizerProvider"> <providers> <add name="AntiXssSanitizerProvider" type="AjaxControlToolkit.Sanitizer.AntiXssSanitizerProvider"></add> </providers> </sanitizer> <compilation debug="true" targetFramework="4.0" /> <pages> <controls> <add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" /> </controls> </pages> </system.web> </configuration> Summary In this blog entry, I described how you can quickly get started using the new HTML Editor extender – included with the July 2011 release of the Ajax Control Toolkit – by installing the Ajax Control Toolkit with NuGet. If you want to learn more about the HTML Editor then please take a look at the Ajax Control Toolkit sample site: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/HTMLEditorExtender/HTMLEditorExtender.aspx

    Read the article

  • TFS 2010 Build Custom Activity for Merging Assemblies

    - by Jakob Ehn
    *** The sample build process template discussed in this post is available for download from here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/ILMerge.xaml ***   In my previous post I talked about library builds that we use to build and replicate dependencies between applications in TFS. This is typically used for common libraries and tools that several other application need to reference. When the libraries grow in size over time, so does the number of assemblies. So all solutions that uses the common library must reference all the necessary assemblies that they need, and if we for example do a refactoring and extract some code into a new assembly, all the clients must update their references to reflect these changes, otherwise it won’t compile. To improve on this, we use a tool from Microsoft Research called ILMerge (Download from here). It can be used to merge several assemblies into one assembly that contains all types. If you haven’t used this tool before, you should check it out. Previously I have implemented this in builds using a simple batch file that contains the full command, something like this: "%ProgramFiles(x86)%\microsoft\ilmerge\ilmerge.exe" /target:library /attr:ClassLibrary1.bl.dll /out:MyNewLibrary.dll ClassLibrary1.dll ClassLibrar2.dll ClassLibrary3.dll This merges 3 assemblies (ClassLibrary1, 2 and 3) into a new assembly called MyNewLibrary.dll. It will copy the attributes (file version, product version etc..) from ClassLibrary1.dll, using the /attr switch. For more info on ILMerge command line tool, see the above link. This approach works, but requires a little bit too much knowledge for the developers creating builds, therefor I have implemented a custom activity that wraps the use of ILMerge. This makes it much simpler to setup a new build definition and have the build automatically do the merging. The usage of the activity is then implemented as part of the Library Build process template mentioned in the previous post. For this article I have just created a simple build process template that only performs the ILMerge operation.   Below is the code for the custom activity. To make it compile, you need to reference the ILMerge.exe assembly. /// <summary> /// Activity for merging a list of assembies into one, using ILMerge /// </summary> public sealed class ILMergeActivity : BaseCodeActivity { /// <summary> /// A list of file paths to the assemblies that should be merged /// </summary> [RequiredArgument] public InArgument<IEnumerable<string>> InputAssemblies { get; set; } /// <summary> /// Full path to the generated assembly /// </summary> [RequiredArgument] public InArgument<string> OutputFile { get; set; } /// <summary> /// Which input assembly that the attibutes for the generated assembly should be copied from. /// Optional. If not specified, the first input assembly will be used /// </summary> public InArgument<string> AttributeFile { get; set; } /// <summary> /// Kind of assembly to generate, dll or exe /// </summary> public InArgument<TargetKindEnum> TargetKind { get; set; } // If your activity returns a value, derive from CodeActivity<TResult> // and return the value from the Execute method. protected override void Execute(CodeActivityContext context) { string message = InputAssemblies.Get(context).Aggregate("", (current, assembly) => current + (assembly + " ")); TrackMessage(context, "Merging " + message + " into " + OutputFile.Get(context)); ILMerge m = new ILMerge(); m.SetInputAssemblies(InputAssemblies.Get(context).ToArray()); m.TargetKind = TargetKind.Get(context) == TargetKindEnum.Dll ? ILMerge.Kind.Dll : ILMerge.Kind.Exe; m.OutputFile = OutputFile.Get(context); m.AttributeFile = !String.IsNullOrEmpty(AttributeFile.Get(context)) ? AttributeFile.Get(context) : InputAssemblies.Get(context).First(); m.SetTargetPlatform(RuntimeEnvironment.GetSystemVersion().Substring(0,2), RuntimeEnvironment.GetRuntimeDirectory()); m.Merge(); TrackMessage(context, "Generated " + m.OutputFile); } } [Browsable(true)] public enum TargetKindEnum { Dll, Exe } NB: The activity inherits from a BaseCodeActivity class which is an internal helper class which contains some methods and properties useful for moste custom activities. In this case, it uses the TrackeMessage method for writing to the build log. You either need to remove the TrackMessage method calls, or implement this yourself (which is not very hard… ) The custom activity has the following input arguments: InputAssemblies A list with the (full) paths to the assemblies to merge OutputFile The name of the resulting merged assembly AttributeFile Which assembly to use as the template for the attribute of the merged assembly. This argument is optional and if left blank, the first assembly in the input list is used TargetKind Decides what type of assembly to create, can be either a dll or an exe Of course, there are more switches to the ILMerge.exe, and these can be exposed as input arguments as well if you need it. To show how the custom activity can be used, I have attached a build process template (see link at the top of this post) that merges the output of the projects being built (CommonLibrary.dll and CommonLibrary2.dll) into a merged assembly (NewLibrary.dll). The build process template has the following custom process parameters:   The Assemblies To Merge argument is passed into a FindMatchingFiles activity to located all assemblies that are located in the BinariesDirectory folder after the compilation has been performed by Team Build. Here is the complete sequence of activities that performs the merge operation. It is located at the end of the Try, Compile, Test and Associate… sequence: It splits the AssembliesToMerge parameter and appends the full path (using the BinariesDirectory variable) and then enumerates the matching files using the FindMatchingFiles activity. When running the build, you can see that it merges two assemblies into a new one:     And the merged assembly (and associated pdb file) is copied to the drop location together with the rest of the assemblies:

    Read the article

  • 14+ Real Estate WordPress Themes

    - by Aditi
    If you are looking for a great WordPress real estate theme. Below is a list of some of the best wordpress real estate themes, so you can find one, which is the best suited for you and be at par with increasing industry demands in real estates business.We have covered only the best themes available. The Themes are flexible & can be used by anybody in real estate business. If you are realtor, agent, appraiser or realty these can be modified as per your use. Estate It is an immensely powerful and simple to manage business theme. It offers advanced SEO control, clean code and styling modification features. It has new “Properties” management facility when installed – proving it’s far more than just a WordPress theme. It offers flexible page templates, an advanced search facility that allows you to drill down into properties based on very specific criteria, Google Maps integration and smart property images management. It is a complete web solution. It also has IDX functionality due to dsIDXpress plugin integration, which allows multi-listing services. Price: $200 View Demo Download ElegantEstate It makes your WordPress blog into a full-feature real estate website. The theme makes browsing your listings easy, and adds special integration features for property info, photos, Google Maps and more. Help increase sales by establishing an elegant and professional online presence today. It has opera compatibility, Netscape compatibility, Safari compatibility, WordPress 3.0 compatibility. It comes with five color schemes, threaded comments, optional blog-style structure, Gravatar ready, firefox compatible, IE8 + IE7 + IE6 compatible, advertisement ready, widget ready sidebars, theme options page, custom thumbnail images, PSD files, valid XHTML + CSS, smooth table less design, ePanel theme options, page templates, complete localization and many more features. Price: $39 (Package includes more than 55 themes) View Demo Download Open House Open House is fully compatible with WordPress 3.0+ and a highly customizable Real Estate WordPress theme. It has Google Maps Integration with Street View. It has a professional look for Agents and Realtors both. It is best suited for all markets and countries with theme localization, translation and internationalization. It provides for English, Spanish and Portuguese language files in the Developer Package. It has custom scripts, which makes it easy to add/delete/modify listings. It also includes photo gallery with a lightbox effect, gorgeous photo fade animations and automatic Google Maps integration. The theme can be used as a single or multi-agent website with individual Agent-Realtor pages with listings and biography information, Agent photo uploader, financing calculator.There is Multi Category search for potential customers to locate the house they want. Price: $39.95 essential | $69.95 standard | $99.95 premium View Demo Download Residence Real Estate It is a WordPress 3.0+ compatible stunning real estate theme. It has a dynamic real estate framework management module for easy edit-delete-add more features options, which makes this theme super easy to customize to the market needs. It allows you to add your own labels and values in your own language and switch the theme to your own language with English and Spanish files included with the ability to add your own language. It offers Multi-Category search with breadcrumb filtered results, easy photo gallery management with drag-drop sorting of images. It allows you to build your own multi-category search section menu with custom labels-choices and unlimited dropdown menus. They have been presented in a professional module with search results in breadcrumb navigation. Price: $39.95 essential | $69.95 standard | $99.95 premium View Demo Download Smooth Smooth is a WordPress Real Estate theme. It is a complete theme, which comes with Multi Category Search, Google Maps Integration, Agent Photo and Logo uploader that offers a professional and extremely affordable solution for Realtors and Agents to showcase their properties with ease. You can add your listings with the extremely easy and flexible Dynamic Real Estate Framework, edit-add-modify-delete all features, labels and values within the WordPress administration and upload unlimited photos to your galleries with latest WordPress 3.0+ features. It is a complete solution for real estate sites. Price: $39.95 essential | $69.95 standard | $99.95 premium View Demo Download Homeowners It is another WordPress Real Estate theme, which is a fast loading optimized theme with Google Maps Integration, fully compatible with WordPress 3.0 features and all Real Estate markets. It has a professional clean look and it is full of features extremely easy to modify. It also provides for 12 new styles provided. English, Spanish and Portuguese language files are provided in the Developer Package. Homeowners WordPress Real Estate features custom scripts that make add/delete/modify listings an easy task with an included photo gallery with a lightbox effect and automatic Google Map integration with street view (New) Agents will have access only to their own listings and add the listing management for their account making this theme an ideal affordable solution for Realtors and Real Estate agencies. The theme can be used as a single or multi-agent website with individual Agent-Realtor pages with listings and biography information, Agent photo uploader, financing calculator. Multi category search has also been provided. Price: $39.95 essential | $69.95 standard | $99.95 premium View Demo Download Real Agent Real Estate This theme is a WordPress 3.0+ compatible clean grid based real estate theme. It has a dynamic real estate framework management module for easy edit-delete-add more features options. It is easy to customize according to market. It allows you to add your own labels and values in your own language switch the theme to your own language with English and Spanish files included with the ability to add your own language. Multi-Category search with breadcrumb filtered results, easy photo gallery management with drag-drop sorting of images. You can upload property photos in bulk with the native WordPress uploader and the new image editing and resizing options in WordPress 3.0+. The theme features 5 different color styles, blue, black, red, green and purple with professional layouts, logo and agent photo uploaders. This theme is best suited for individual or multiple agents both. Price: $39.95 essential | $69.95 standard | $99.95 premium View Demo Download Agent Press The AgentPress theme is an ideal solution for real estate agents. It offers multiple page templates that can be used to create a complete real estate website. You can create from single property templates to a custom homepage easily with it. It is compatible to WordPress 3.0 and 3.1. It has custom background/header, property template, 6 layout options, fixed width, threaded comments and many more features. Price: $99.95 View Demo Download Real Estate It is one of the best Real Estate themes. It offers single click auto install of the site, Allow user to pay & submit properties on your site, Multi-agent site with profiles, Strategically built real estate site with professional design, User dashboard to edit/renew their submissions, Auto generated Google Maps and Image Slideshows and many more unique features. Once the users search property as per their criteria, the properties are listed with all the necessary parameters that let them select the property of their choice. Users can also add the property to favorite so they can check the property later from their member area dashboard. Admin may display different sidebar on this page and add widgets of their choice. This theme is full of custom, dynamic widgets such as top agents, finance calculator, user login; advertise blocks, testimonials and so on. There is a property details page where users can see the actual property. The agent details is displayed with the full contact details and appropriate links so the visitor can get all info about the property being sold, seller and may contact them by filling out a simple form. The email will be sent directly to the person who listed the property. Price: $89.95 Single | $159.95 Developer View Demo Download Broker Real Estate It is also a WordPress 3.0+ compatible real estate theme. It has a featured property slideshow, dynamic real estate framework management module for easy edit-delete-add more features. You can add your own labels and values in your own language. It offers multi-category search with breadcrumb-filtered results, easy photo gallery management with drag-drop sorting of images. You can also build your own multi-category search section menu with custom labels-choices and unlimited dropdown menus. Price: $39.95 essential | $69.95 standard | $99.95 premium View Demo Download Decasa It has custom search panel that lets your user easily browse your properties by keyword search or category select drop downs. It offers the property exposé, which is a user-friendly overview over the most important details of each real estate object. You can easily add this data through a post settings meta box on the post edit screen. You can easily create a real estate image gallery. Its theme options panel makes it easy to make the basic theme settings. It supports the new WordPress post thumbnail feature. When uploading an image file the theme will automatically create all the necessary image size. You can also create your own custom menu easily and fast with drag and drop without touching any code. Price: 39 € View Demo Download RealtorPress A real estate premium WordPress theme from PremiumPress. Versatile WordPress Theme that can be used by individual agents or real estate companies. The theme allows you to easily add property listings via the custom backend admin area or import CSV spreadsheets. It features customisable search options, Google maps integration, real estate data custom field creator, image management tools and more. Price: $79 | Premium Collection: $259 (all PremiumPress themes) View Demo Download Related posts:21+ WordPress Photo Blog & Portfolio Themes 14+ WordPress Portfolio Themes Professional WordPress Business Themes

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Upgrading Team Foundation Server 2008 to 2010

    - by Martin Hinshelwood
    I am sure you will have seen my posts on upgrading our internal Team Foundation Server from TFS2008 to TFS2010 Beta 2, RC and RTM, but what about a fresh upgrade of TFS2008 to TFS2010 using the RTM version of TFS. One of our clients is taking the plunge with TFS2010, so I have the job of doing the upgrade. It is sometimes very useful to have a team member that starts work when most of the Sydney workers are heading home as I can do the upgrade without impacting them. The down side is that if you have any blockers then you can be pretty sure that everyone that can deal with your problem is asleep I am starting with an existing blank installation of TFS 2010, but Adam Cogan let slip that he was the one that did the install so I thought it prudent to make sure that it was OK. Verifying Team Foundation Server 2010 We need to check that TFS 2010 has been installed correctly. First, check the Admin console and have a root about for any errors. Figure: Even the SQL Setup looks good. I don’t know how Adam did it! Backing up the Team Foundation Server 2008 Databases As we are moving from one server to another (recommended method) we will be taking a backup of our TFS2008 databases and resorting them to the SQL Server for the new TFS2010 Server. Do not just detach and reattach. This will cause problems with the version of the database. If you are running a test migration you just need to create a backup of the TFS 2008 databases, but if you are doing the live migration then you should stop IIS on the TFS 2008 server before you backup the databases. This will stop any inadvertent check-ins or changes to TFS 2008. Figure: Stop IIS before you take a backup to prevent any TFS 2008 changes being written to the database. It is good to leave a little time between taking the TFS 2008 server offline and commencing the upgrade as there is always one developer who has not finished and starts screaming. This time it was John Liu that needed 10 more minutes to make his changes and check-in, so I always give it 30 minutes and see if anyone screams. John Liu [SSW] said:   are you doing something to TFS :-O MrHinsh [SSW UK][VS ALM MVP] said:   I have stopped TFS 2008 as per my emails John Liu [SSW] said:   haven't finish check in @_@   can we have it for 10mins? :) MrHinsh [SSW UK][VS ALM MVP] said:   TFS 2008 has been started John Liu [SSW] said:   I love you! -IM conversation at TFS Upgrade +25 minutes After John confirmed that he had everything done I turned IIS off again and made a cup of tea. There were no more screams so the upgrade can continue. Figure: Backup all of the databases for TFS and include the Reporting Services, just in case.   Figure: Check that all the backups have been taken Once you have your backups, you need to copy them to your new TFS2010 server and restore them. This is a good way to proceed as if we have any problems, or just plain run out of time, then you just turn the TFS 2008 server back on and all you have lost is one upgrade day, and not 10 developer days. As per the rules, you should record the number of files and the total number of areas and iterations before the upgrade so you have something to compare to: TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 You can use this to verify that the upgrade was successful. it should however be noted that the numbers in TFS 2010 will be bigger. This is due to some of the sorting out that TFS does during the upgrade process. Restore Team Foundation Server 2008 Databases Restoring the databases is much more time consuming than just attaching them as you need to do them one at a time. But you may be taking a backup of an operational database and need to restore all your databases to a particular point in time instead of to the latest. I am doing latest unless I encounter any problems. Figure: Restore each of the databases to either a latest or specific point in time.     Figure: Restore all of the required databases Now that all of your databases are restored you now need to upgrade them to Team Foundation Server 2010. Upgrade Team Foundation Server 2008 Databases This is probably the easiest part of the process. You need to call a fire and forget command that will go off to the database specified, find the TFS 2008 databases and upgrade them to 2010. During this process all of the 6 main TFS 2008 databases are merged into the TfsVersionControl database, upgraded and then the database is renamed to TFS_[CollectionName]. The rename is only the database and not the physical files, so it is worth going back and renaming the physical file as well. This keeps everything neat and tidy. If you plan to keep the old TFS 2008 server around, for example if you are doing a test migration first, then you will need to change the TFS GUID. This GUID is unique to each TFS instance and is preserved when you upgrade. This GUID is used by the clients and they can get a little confused if there are two servers with the same one. To kick of the upgrade you need to open a command prompt and change the path to “C:\Program Files\Microsoft Team Foundation Server 2010\Tools” and run the “import” command in  “tfsconfig”. TfsConfig import /sqlinstance:<Previous TFS Data Tier>                  /collectionName:<Collection Name>                  /confirmed Imports a TFS 2005 or 2008 data tier as a new project collection. Important: This command should only be executed after adequate backups have been performed. After you import, you will need to configure portal and reporting settings via the administration console. EXAMPLES -------- TfsConfig import /sqlinstance:tfs2008sql /collectionName:imported /confirmed TfsConfig import /sqlinstance:tfs2008sql\Instance /collectionName:imported /confirmed OPTIONS: -------- sqlinstance         The sql instance of the TFS 2005 or 2008 data tier. The TFS databases at that location will be modified directly and will no longer be usable as previous version databases.  Ensure you have back-ups. collectionName      The name of the new Team Project Collection. confirmed           Confirm that you have backed-up databases before importing. This command will automatically look for the TfsIntegration database and verify that all the other required databases exist. In this case it took around 5 minutes to complete the upgrade as the total database size was under 700MB. This was unlike the upgrade of SSW’s production database with over 17GB of data which took a few hours. At the end of the process you should get no errors and no warnings. The Upgrade operation on the ApplicationTier feature has completed. There were 0 errors and 0 warnings. As this is a new server and not a pure upgrade there should not be a problem with the GUID. If you think at any point you will be doing this more than once, for example doing a test migration, or merging many TFS 2008 instances into a single one, then you should go back and rename the physical TfsVersionControl.mdf file to the same as the new collection. This will avoid confusion later down the line. To do this, detach the new collection from the server and rename the physical files. Then reattach and change the physical file locations to match the new name. You can follow http://www.mssqltips.com/tip.asp?tip=1122 for a more detailed explanation of how to do this. Figure: Stop the collection so TFS does not take a wobbly when we detach the database. When you try to start the new collection again you will get a conflict with project names and will require to remove the Test Upgrade collection. This is fine and it just needs detached. Figure: Detaching the test upgrade from the new Team Foundation Server 2010 so we can start the new Collection again. You will now be able to start the new upgraded collection and you are ready for testing. Do you remember the stats we took off the TFS 2008 server? TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 Well, now we need to compare them to the TFS 2010 stats, remembering that there will probably be more files under source control. TFS2010 File count: Type Count 1 19288 Areas & Iterations: 139 Lovely, the number of iterations are the same, and the number of files is bigger. Just what we were looking for. Testing the upgraded Team Foundation Server 2010 Project Collection Can we connect to the new collection and project? Figure: We can connect to the new collection and project.   Figure: make sure you can connect to The upgraded projects and that you can see all of the files. Figure: Team Web Access is there and working. Note that for Team Web Access you now use the same port and URL as for TFS 2010. So in this case as I am running on the local box you need to use http://localhost:8080/tfs which will redirect you to http://localhost:8080/tfs/web for the web access. If you need to connect with a Visual Studio 2008 client you will need to use the full path of the new collection, http://[servername]/tfs/[collectionname] and this will work with all of your collections. With Visual Studio 2005 you will only be able to connect to the Default collection and in both VS2008 and VS2005 you will need to install the forward compatibility updates. Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 To make sure that you have everything up to date, make sure that you run SSW Diagnostics and get all green ticks. Upgrade Done! At this point you can send out a notice to everyone that the upgrade is complete and and give them the connection details. You need to remember that at this stage we have 2008 project upgraded to run under TFS 2010 but it is still running under that same process template that it was running before. You can only “enable” 2010 features in a process template you can’t upgrade. So what to do? Well, you need to create a new project and migrate things you want to keep across. Souse code is easy, you can move or Branch, but Work Items are more difficult as you can’t move them between projects. This instance is complicated more as the old project uses the Conchango/EMC Scrum for Team System template and I will need to write a script/application to get the work items across with their attachments in tact. That is my next task! Technorati Tags: TFS 2010,TFS 2008,VS ALM

    Read the article

  • Tips on installing Visual Studio 2010 SP1

    - by Jon Galloway
    Visual Studio SP1 went up on MSDN downloads (here) on March 8, and will be released publicly on March 10 here. Release announcements: Soma: Visual Studio 2010 enhancements Jason Zander: Announcing Visual Studio 2010 Service Pack 1 I started on this post with tips on installing VS2010 SP1 when I realized I’ve been writing these up for Visual Studio and .NET framework SP releases for a while (e.g. VS2008 / .NET 3.5 SP1 post, VS2005 SP1 post). Looking back the years of Visual Studio SP installs (and remembering when we’d get up to SP6 for a Visual Studio release), I’m happy to see that it just keeps getting easier. Service Packs are a lot less finicky about requiring beta software to be uninstalled, install more quickly, and are just generally a lot less scary. If I can’t have a jetpack, at least my future provided me faster, easier service packs. Disclaimer: These tips are just general things I've picked up over the years. I don't have any inside knowledge here. If you see anything wrong, be sure to let me know in the comments. You may want to check the readme file before installing - it's short, and it's in that new-fangled HTML format. On with the tips! Before starting, uninstall Visual Studio features you don't use Visual Studio service packs (and other Microsoft service packs as well) install patches for the specific features you’ve got installed. This is a big reason to always do a custom install when you first install Visual Studio, but it’s not difficult to update your existing installation. Here’s the quick way to do that: Tap the windows key and type “add or remove programs” and press enter (or click on the “Add or remove programs” link if you must).   Type “Visual Studio 2010” in the search box in the upper right corner, click on the Visual Studio program (the one with the VS infinity looking logo) and click on Uninstall/Change. Click on Add or Remove Features The next part’s up to you – what features do you actually use? I’ve been doing primarily ASP.NET MVC development in C# lately, so I selected Visual C# and Visual Web Developer. Remember that you can install features later if needed, and can also install the express versions if you want. Selecting everything just because it’s there - or you paid for it – means that you install updates for everything, every time. When you’ve made your changes, click on the Update button to uninstall unused features. Shut down all instances of Visual Studio It probably goes without saying that you should close a program down before installing it, partly to avoid the file-in-use-reboot-after-install horror. Additional "hunch / works on my machine" quality tip: On one computer I saw a note in the setup log about Visual Studio a prompt for user input to close Visual Studio, although I never saw the prompt. Just to  be sure, I'd personally open up Task Manager and kill any devenv.exe processes I saw running, as it couldn't hurt. Use the web installer I use the Web Installers whenever possible. There’s no point in downloading the DVD unless you’re doing multiple installs or won’t have internet access. The DVD IS is 1.5GB, since it needs to be able to service every possible supported installation option on both x86 and x64. The web installer is 776 KB (smaller than calc.exe), so you can start the installation right away. Like other web installers, the real benefit is that it only installs the updates you need (hence the reason for step 1 – uninstalling unused components). Instead of 1.5GB, my download was roughly 530MB. If you’re installing from MSDN (this link takes you right to the Visual Studio installs), select the first one on the list: The first step in the installation process is to analyze the machine configuration and tell you what needs to be installed. Since I've trimmed down my features, that's a pretty short list. The time's not far off where I may not install SQL Server on my dev machines, just using SQL Server Compact - that would shorten the list further. When I hit next, you can see that the download size has shrunk considerably. When I start the install, note that the installation begins while other components are downloading - another benefit of the web install. On my mid-range desktop machine, the install took 25 minutes. What if it takes longer? According to Heath Stewart (Visual Studio installer guru), average SP1 installs take roughly 45 minutes. An installation which takes hours to complete may be a sign of a problem: see his post Visual Studio 2010 Service Pack 1 installing for over 2 hours could be a sign of a problem. Why so long? Yes, even 25 minutes is a while. Heath's got another blog post explaining why the update can take longer than the initial install (see: A patch may take as long or longer to install than the target product) which explains all the additional steps and complexities a patch needs to deal with, as well as some mitigation steps that deployment authors can take to mitigate the impact. Other things to know about Visual Studio 2010 SP1 Installs over Visual Studio 2010 SP1 Beta That's nice. Previous Visual Studio versions did a number of annoying things when you installed SP's over beta's - fail with weird errors, get part way through and tell you needed to cancel and uninstall first, etc. I've installed this on two machines that had random beta stuff installed without tears. That Readme file you didn't read I mentioned the readme file earlier (http://go.microsoft.com/fwlink/?LinkId=210711 ). Some interesting things I picked up in there: 2.1.3. Visual Studio 2010 Service Pack 1 installation may fail when a USB drive or other removeable drive is connected 2.1.4. Visual Studio must be restarted after Visual Studio 2010 SP1 tooling for SQL Server Compact (Compact) 4.0 is installed 2.2.1. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled to restore certain components 2.2.2. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled before SP1 can be installed again 2.4.3.1. Async CTP If you installed the pre-SP1 version of Async CTP but did not uninstall it before you installed Visual Studio 2010 SP1, then your computer will be in a state in which the version of the C# compiler in the .NET Framework does not match the C# compiler in Visual Studio. To resolve this issue: After you install Visual Studio 2010 SP1, reinstall the SP1 version of the Async CTP from here. Hardware acceleration for Visual Studio is disabled on Windows XP Visual Studio 2010 SP1 disables hardware acceleration when running on Windows XP (only on XP). You can turn it back on in the Visual Studio options, under Environment / General, as shown below. See Jason Zander's post titled Performance Troubleshooting Article and VS2010 SP1 Change.

    Read the article

  • Parallelism in .NET – Part 5, Partitioning of Work

    - by Reed
    When parallelizing any routine, we start by decomposing the problem.  Once the problem is understood, we need to break our work into separate tasks, so each task can be run on a different processing element.  This process is called partitioning. Partitioning our tasks is a challenging feat.  There are opposing forces at work here: too many partitions adds overhead, too few partitions leaves processors idle.  Trying to work the perfect balance between the two extremes is the goal for which we should aim.  Luckily, the Task Parallel Library automatically handles much of this process.  However, there are situations where the default partitioning may not be appropriate, and knowledge of our routines may allow us to guide the framework to making better decisions. First off, I’d like to say that this is a more advanced topic.  It is perfectly acceptable to use the parallel constructs in the framework without considering the partitioning taking place.  The default behavior in the Task Parallel Library is very well-behaved, even for unusual work loads, and should rarely be adjusted.  I have found few situations where the default partitioning behavior in the TPL is not as good or better than my own hand-written partitioning routines, and recommend using the defaults unless there is a strong, measured, and profiled reason to avoid using them.  However, understanding partitioning, and how the TPL partitions your data, helps in understanding the proper usage of the TPL. I indirectly mentioned partitioning while discussing aggregation.  Typically, our systems will have a limited number of Processing Elements (PE), which is the terminology used for hardware capable of processing a stream of instructions.  For example, in a standard Intel i7 system, there are four processor cores, each of which has two potential hardware threads due to Hyperthreading.  This gives us a total of 8 PEs – theoretically, we can have up to eight operations occurring concurrently within our system. In order to fully exploit this power, we need to partition our work into Tasks.  A task is a simple set of instructions that can be run on a PE.  Ideally, we want to have at least one task per PE in the system, since fewer tasks means that some of our processing power will be sitting idle.  A naive implementation would be to just take our data, and partition it with one element in our collection being treated as one task.  When we loop through our collection in parallel, using this approach, we’d just process one item at a time, then reuse that thread to process the next, etc.  There’s a flaw in this approach, however.  It will tend to be slower than necessary, often slower than processing the data serially. The problem is that there is overhead associated with each task.  When we take a simple foreach loop body and implement it using the TPL, we add overhead.  First, we change the body from a simple statement to a delegate, which must be invoked.  In order to invoke the delegate on a separate thread, the delegate gets added to the ThreadPool’s current work queue, and the ThreadPool must pull this off the queue, assign it to a free thread, then execute it.  If our collection had one million elements, the overhead of trying to spawn one million tasks would destroy our performance. The answer, here, is to partition our collection into groups, and have each group of elements treated as a single task.  By adding a partitioning step, we can break our total work into small enough tasks to keep our processors busy, but large enough tasks to avoid overburdening the ThreadPool.  There are two clear, opposing goals here: Always try to keep each processor working, but also try to keep the individual partitions as large as possible. When using Parallel.For, the partitioning is always handled automatically.  At first, partitioning here seems simple.  A naive implementation would merely split the total element count up by the number of PEs in the system, and assign a chunk of data to each processor.  Many hand-written partitioning schemes work in this exactly manner.  This perfectly balanced, static partitioning scheme works very well if the amount of work is constant for each element.  However, this is rarely the case.  Often, the length of time required to process an element grows as we progress through the collection, especially if we’re doing numerical computations.  In this case, the first PEs will finish early, and sit idle waiting on the last chunks to finish.  Sometimes, work can decrease as we progress, since previous computations may be used to speed up later computations.  In this situation, the first chunks will be working far longer than the last chunks.  In order to balance the workload, many implementations create many small chunks, and reuse threads.  This adds overhead, but does provide better load balancing, which in turn improves performance. The Task Parallel Library handles this more elaborately.  Chunks are determined at runtime, and start small.  They grow slowly over time, getting larger and larger.  This tends to lead to a near optimum load balancing, even in odd cases such as increasing or decreasing workloads.  Parallel.ForEach is a bit more complicated, however. When working with a generic IEnumerable<T>, the number of items required for processing is not known in advance, and must be discovered at runtime.  In addition, since we don’t have direct access to each element, the scheduler must enumerate the collection to process it.  Since IEnumerable<T> is not thread safe, it must lock on elements as it enumerates, create temporary collections for each chunk to process, and schedule this out.  By default, it uses a partitioning method similar to the one described above.  We can see this directly by looking at the Visual Partitioning sample shipped by the Task Parallel Library team, and available as part of the Samples for Parallel Programming.  When we run the sample, with four cores and the default, Load Balancing partitioning scheme, we see this: The colored bands represent each processing core.  You can see that, when we started (at the top), we begin with very small bands of color.  As the routine progresses through the Parallel.ForEach, the chunks get larger and larger (seen by larger and larger stripes). Most of the time, this is fantastic behavior, and most likely will out perform any custom written partitioning.  However, if your routine is not scaling well, it may be due to a failure in the default partitioning to handle your specific case.  With prior knowledge about your work, it may be possible to partition data more meaningfully than the default Partitioner. There is the option to use an overload of Parallel.ForEach which takes a Partitioner<T> instance.  The Partitioner<T> class is an abstract class which allows for both static and dynamic partitioning.  By overriding Partitioner<T>.SupportsDynamicPartitions, you can specify whether a dynamic approach is available.  If not, your custom Partitioner<T> subclass would override GetPartitions(int), which returns a list of IEnumerator<T> instances.  These are then used by the Parallel class to split work up amongst processors.  When dynamic partitioning is available, GetDynamicPartitions() is used, which returns an IEnumerable<T> for each partition.  If you do decide to implement your own Partitioner<T>, keep in mind the goals and tradeoffs of different partitioning strategies, and design appropriately. The Samples for Parallel Programming project includes a ChunkPartitioner class in the ParallelExtensionsExtras project.  This provides example code for implementing your own, custom allocation strategies, including a static allocator of a given chunk size.  Although implementing your own Partitioner<T> is possible, as I mentioned above, this is rarely required or useful in practice.  The default behavior of the TPL is very good, often better than any hand written partitioning strategy.

    Read the article

< Previous Page | 905 906 907 908 909 910 911 912 913 914 915 916  | Next Page >