Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 91/468 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• How to resolve IPs in DNS based on the subnet of the requesting client?

  - by Nohsib

  Is it possible to configure Bind9 or other DNS to resolve the domain name of a machine into different IPs based on the subnet of the requesting client? e.g. Say the same service is running on 2 different application servers at different geographical points and based on the incoming request to resolve the domain name, the name server provides the IP of the application server based on the requesting client's IP, so the service could be offered by servers that are geographically closer to the client. In short, something like a CDN but just the IP resolution part based on the client's subnet. Is this configurable in any DNS?

  Read the article

• tcpdump selective acknowledgements question

  - by wlaus

  Hi All, I eventually sometimes watch most initial tcp connection attempts like this: tcpdump -nn -Z somepcapuser not src host (12x.x5.109.xxx or 62.75.160.xxx ) and not (port 9001 or 443 or 8080 ) and tcp[tcpflags]&(tcp-syn) !=0 and not tcp[tcpflags]& (tcp-ack) !=0 or icmp this works pretty well to quickly identify oddness so far. However, I now have a question on the following output: 03:53:52.227884 IP 203.81.166.20.53786 62.75.160.xxx.80: S 846930886:846930886(0) win 61690 "<"mss 1460,nop,nop,sackOK,opt-178:f04700000000,nop,wscale 4"" I wonder what the marked portion means, haven't seen that before. Thanks for help wlaus

  Read the article

• ADSL with RFC 2684 Bridging

  - by Axel Isouard

  My new ADSL line is now enabled, I can finally use my Netgear DM111Pv2 to use to the Internet. My ISP has told me a big surprise : I don't need to use a login and a password to connect to the Internet, then I must use the RFC 2684 bridging mode. It works pretty fine on the ADSL modem's side, but I've spent one night trying to figure out how to connect to the Internet through this modem. I only have a Fonera 2.0n and a computer running Gentoo Linux. I've been trying to use the br2684ctl utility with brctl on my Gentoo, first I've configured my kernel in that way : CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set CONFIG_PPP_MPPE=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPPOATM=y CONFIG_PPPOE=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y [...] CONFIG_ATM=y CONFIG_ATM_CLIP=y CONFIG_ATM_CLIP_NO_ICMP=y CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set And I still get these messages : cirus nais # br2684ctl -b -c 0 -e 0 -a 8.35 br2684ctl[8041]: Interface "nas0" created sucessfully br2684ctl[8041]: Communicating over ATM 0.8.35, encapsulation: LLC br2684ctl[8041]: Fatal: failed to connect on socket; No such device The brctl utility keeps telling me "Invalid argument" each time I try to add the nas0 interface into my bridge, I'm honestly hoping I'm doing wrong. I've been following this README carefully and this tutorial on setting up a PPPoE connection with Gentoo, but the PPPoE interface just tries to start, and nothing special related to PPP happens, I can't see the interface when I do ifconfig. So, I'm asking you if there's something huge I've been missing since the beginning ! Maybe I should wait to buy a new router fully supporting the RFC2684 bridging mode, but I'm more interested in setting up this mode on my Fonera 2.0n and even my Raspberry Pi !

  Read the article

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

• NAS that supports NZB downloading for around £150 ($220) or less (without hard drive)

  - by Jigs

  I have seen a number of NAS's that are around that price, but I am worried that they may not be able to handle the processing of .rar files (I know that can be quite CPU intensive). Does anyone have any experiences with sabnzbd or hellanzb - or similar on their NAS? In terms of features the main requirement is NZB downloading - I am quite flexible on the other features. Wifi support would be nice, but not essential. Torrent downloading would also be nice. One disk drive would probably be enough. Easy installation of application would be nice... but again I am sure I can follow a tutorial.

  Read the article

• Remotely push DNS server to client via OpenVPN

  - by wishi

  Hi! When I try to push a DNS server via the OpenVPN server-config I don't get that server to be the first DNS server on the connected client system. It ends up being specified as an alternative DNS server. push "dhcp-option DNS 89.238.75.146" # DNS-Server 1 (local djbdns) To overcome certain network restrictions, if they're at place, I use 443 TCP. - That means that my DNS queries are sent via TCP (if I manually reconfigure the DNS server), which doesn't scale very well from a performance perspective. Are there any kewl solutions for that? Marius

  Read the article

• Synergy on macbook with osx mavericks wifi connection

  - by user332956

  I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

  Read the article

• allow SSH to bypass VPN on OSX mavericks, openvpn, pf

  - by zycho42

  My home computer connects to the internet through an OpenVPN connection. However, I would like to be able to connect to my home computer from outside over ssh. Ssh is set up and working, but when I connect to the vpn ssh is only accessible from inside my home network. I figure what's going wrong is my router forwards incoming ssh connections to my mac, but then my mac replies over the vpn, so the connection from outside times out. I've got pf set up for a couple of other things, but I can't figure out how to let the ssh replies bypass the vpn using pf. I've come across other solutions that use ip tables, routing tables and rules, but I can't figure out how to set that up on mavericks. I've been searching for this for a while now but I haven't found a working solution. Any help would be greatly appreciated!

  Read the article

• Server Names Inside Private Network

  - by thyandrecardoso

  Our office has a private network, where any requests on a (pre-determined) public IP are forwarded to a private IP inside said network. On that private IP, we've got a server running several services, including HTTP servers, and SCM systems. We only control our private network, having no control on the public IP configuration. We bought a domain name, and pointed it to that public IP, so people can access our services from the outside. But, when inside the office, people can't use that DNS name, because the server and any other hosts inside the network share the same public IP! For desktops, inside the office network, dealing with names is really easy: one entry on the hosts file and we're done. However, for laptops, that keep going in and out, and need to access services inside the office, the naming is really annoying. I don't know the "standard" process for dealing with these kind of situations. I've considered installing BIND in the office, and make people configure their wireless and wired connections to use that DNS server. What is the correct approach in this situation? If using BIND (or any other DNS server) is the answer, how should I configure it so that people inside the office can use it to get our custom names, and get forwarded to the ISP DNS when trying to reach the internet?

  Read the article

• cisco 6500 crash enabling netflow

  - by bleomycin

  Hello everyone, i have a cisco 6503 running IOS 12.2(33)sxi5 and i'm trying to enable netflow. Following the instructions here http://www.manageengine.com/products/netflow/help/cisco-netflow/cisco-ios-netflow.html enabling for interface vlan 3, shortly after ip flow-export version 5 console outputs: CPU_MONITOR-6-NOT_HEARD: CPU monitor messages have not been heard for 30 seconds crashlog here: http://pastebin.com/Niv2H8xD it then writes a crash log and reloads the router. Has anyone else experienced anything like this before? Here is my running config prior to adding the options in the above link: http://pastebin.com/AgNb1ahG Thank you for any help!

  Read the article

• TCP Zero Window with no corresponding Window Update

  - by Gandalf

  I am trying to debug a network issue and am using Wireshark and tcpdump to grab packets from my server. I have one client application that is grabbing all my available connections and then holding them, trying to send A LOT of data and essentially causing an unintentional DOS attack. While debugging I notice that I see my server sending "Window Closed" and "Zero Window" TCP packets - but never sending any "Window Update" packets. I am guessing this is why the client never lets go of the connections (it still has more data to send and is waiting). Has anyone ever seen this type of behavior before? Let's not get into the reasons why I haven't set up an iptables rule to limit concurrent connections (yeah I know). I also recently changed the MTU from 1500 to 9000 - could this have such a negative effect? (Linux) Thanks.

  Read the article

• how to use winpcap to send EAPOL packets on windows 7 with wireless card?

  - by caimengru0807

  I want to implement a 802.1X wireless client on Windows 7 using PEAP/MSCHAPv2. The 802.1X protocol is a data link layer protocol, it uses the EAPOL protocol to encapsulate the packets. I use the WinPcap to send and receive the EAPOL packets, however I fail to do it with the wireless NIC. It can work fine to send the EAPOL packets use wired NIC. It can also work fine to send the EAPOL packets on Windows XP using wireless NIC. So what's wrong with it on Windows 7?

  Read the article

• DrayTek Vigor 2920(n): VPN with VLAN restrictions?

  - by Dirk

  Hi, I'm currently installing a DrayTek Vigor 2920n router in a new office. This router is to be used for 2 seperate companies. For one of these companies, the router has a LAN-2-LAN (VPN) connection to a datacenter configured. The other company should not be able to access this other (VPN-)network. I'm aware of the capability of this router to have VLAN's, but I cannot figure out how to configure the VPN-connection to only be accessible for VLAN0 and not for VLAN1. I know I can also add another router to physically split both networks, but we bought the DrayTek with the idea that it could easily have the VPN-connection available for VLAN0 and not for VLAN1. VLAN1 can easily be in another subnet, that's fine, although, I don't know how to configure that on this DrayTek. Can anyone point me in the right direction? Thanks in advance, Dirk

  Read the article

• Cisco VPN disconnects after 5 seconds with error 422

  - by Marius

  I'm trying to connect to my university's server with VPN using Cisco VPN Client version 5.0.04, but after 5 seconds it disconnects with the error message 422: Lost contact with the secure gateway. Check your connection. From my research on the net it seems this could be because it tries to find my IP, and finds out that this is 127.0.0.1. Then 5 seconds later it discovers that I have a new IP (my actual IP), and it disconnects because I'm not allowed to change IP. Does anyone know how I could fix this, or if there is another reason i get this error? Update I looked through the log, and found this error, which confirms what I thought, except it gets the correct IP first, then changes it to localhost. 87 18:56:53.250 08/24/09 Sev=Warning/3 CM/0xA3100027 Adapter address changed from 149.171.237.25. Current address(es): 127.0.0.1.

  Read the article

• ESET Remote Administrator Console showing infected files on a client, but threat log is empty

  - by Aron Rotteveel

  We recently deployed ESET NOD32 Antivirus on our small domain network and use the Remote Adminstrator to manage everything remotely. On a recent full system scan, one of the clients shows 10 infected files of which 4 have been cleaned in the scan log. The strange thing, however, is that the threat log is empty. Is there any reason why the threat log is empty? What has happened to the 6 remaining uncleaned files? Where can I view information on what files are infected and what they have been infected with? I know this can be done through the scan log properties screen, but with 958790 files scanned, I obviously do not want to browse through this list. Any help is appreciated.

  Read the article

• RSSI value of wifi connection - how to interpret?

  - by knorv

  In MacOS X you can obtain the RSSI value of your by wifi connection by holding Alt and clicking on the Wifi-indicator icon. My questions are: What range of values can RSSI take? What RSSI ranges corresponds to "good", "normal" and "bad" connectivity?

  Read the article

• unable to ping hostname, but \\hostname\\c$ works!?

  - by ciscokid

  I'm having a strange issue on my initial lab setup. Situation: Host with OS Server 2008 R2 64bit, on this host a Virtual Machine in Hyper-V with OS Server 2008 SP1 32bit. The virtual machine has a fixed ip, and is referring to itself for the preferred DNS Server (dns server role has been installed). The host has tcp/ip set to automatic (so automatic ip from router, and dns/gateway = router). Both are able to ping each other on IP address (same ip range). Both are NOT able to ping each other on hostname (sounds logic because virtual machine dns server does not yet have a dns record for the hostmachine). But here's the strange thing: I am able to set up a working network mapping on the Virtual Machine to the host: \hostname\c$. The first thing I thougt was 'something' is blocking the ping request, so I completely disabled Windows Firewall on both Virtual Machine and host. Still pinging on hostname in both ways didn't work, yet I am able to access the network mapping on hostname. There is no extra software installed on both systems (clean windows server 2008).Can someone tell me what is causing this? I always thought: ping on IP address works = network mapping on IP address works. Pinging on hostname doesn't work = network mapping on hostname doesn't work neither. Where am I wrong? Looking forward to your advice!

  Read the article

• Dual mode 802.11n PCI adapters

  - by Mike Thompson

  I have recently bought a DLink DIR-825 router. It is a dual mode (2.4GZ & 5GHZ) 802.11n wireless access point/router. What is a good PCI adapter to pair with it? DLink appear to only make one dual mode adapter, which is the DWA-160 USB adapter. They don't seem to have a PCI adapter in their range, which seems very strange. Do any of the other network manufacturers make a good dual mode adapter?

  Read the article

• Huawei b260a gsm modem not forwarding gre for pptp tunnel

  - by Priit

  I have a huawei gsm modem that does not want to let gre through. The goal is to connect into a pptp server thats behind the huawei. In the modems port forwarding settings theres a ready made profile for pptp (1723). After activating that the MS pptp test tools show that connection is being initiated but no gre packets make it to the server. After taking a closer look into the modems iptables rules theres nothing in there about gre. So I tried making gre rules manualy into forward and preroute chains without any success what so ever. As far as I can tell theres no ip_gre module present on the device is that needed for gre forwarding? Thats what I'm afraid of that it doesn't support gre in NAT but how would I turn it into a bridge? The wan interface is ppp0 so bridging it with eth0 would not work right? Is there some iptables rule I could use to make the modem let all the traffic just straight through?

  Read the article

• Spanning-tree setup with incompatible switches

  - by wfaulk

  I have a set of eight HP ProCurve 2910al-48G Ethernet switches at my datacenter that are set up in a star topology with no physical loops. I want to partially mesh the switches for redundancy and manage the loops with a spanning-tree protocol. However, our connection to the datacenter is provided by two uplinks, each to a Cisco 3750. The datacenter's switches are handling the redundant connection using PVST spanning-tree, which is a Cisco-proprietary spanning-tree implementation that my HP switches do not support. It appears that my switches are not participating in the datacenter's spanning-tree domain, but are blindly passing the BPDUs between the two switchports on my side, which enables the datacenter's switches to recognize the loop and put one of the uplinks into the Blocking state. This is somewhat supposition, but I can confirm that, while my switches say that both of the uplink ports are forwarding, only one is passing any real quantity of data. (I am assuming that I cannot get the datacenter to move away from PVST. I don't know that I'd want them to make that significant of a change anyway.) The datacenter has also sent me this output from their switches (which I have expurgated of any identifiable info): 3750G-1#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 5 (GigabitEthernet1/0/5) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 0018.73d3.yyyy Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/5 Root FWD 4 128.5 P2p Gi1/0/6 Altn BLK 4 128.6 P2p Gi1/0/8 Altn BLK 4 128.8 P2p and: 3750G-2#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 6 (GigabitEthernet1/0/6) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 000f.f71e.zzzz Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/1 Desg FWD 4 128.1 P2p Gi1/0/5 Altn BLK 4 128.5 P2p Gi1/0/6 Root FWD 4 128.6 P2p Gi1/0/8 Desg FWD 4 128.8 P2p The uplinks to my switches are on Gi1/0/8 on both of their switches. The uplink ports are configured with a single tagged VLAN. I am also using a number of other tagged VLANs in my switch infrastructure. And, to be clear, I am passing the tagged VLAN I'm receiving from the datacenter to other ports on other switches in my infrastructure. My question is: how do I configure my switches so that I can use a spanning tree protocol inside my switch infrastructure without breaking the datacenter's spanning tree that I cannot participate in?

  Read the article

• Why do Ping and Dig provide different IP address than nslookup?

  - by user1032531

  When pinging my domain name which points to my home public IP from two different servers on my LAN, it shows them pinging different IP. Further investigation shows dig and nslookup providing different results. See below. A little history. My IP used to be 11.22.33.444 and is hosted by Comcast. I changed routers, and it somehow got changed to 55.66.77.888. I've since updated my 1and1 domain name to point to the 55.66.77.888. desktop is a basic server, runs the web server, and connects wirelessly to my LAN. laptop is a GUI and connected via CAT5. Both operate Centos6.4. My old router was a D-Link, and used their "Virtual Server" feature to pass port 80 to desktop. My new router is a Linksys, and I use their "Port Forwarding" feature to pass port 80 to desktop (however, I haven't gotten this part working yet). What is going on??? Why the different IPs? Obviously, it most somehow be stored on the server, but why does the actual machine even know the public IP since it is on a LAN? How do I purge the old IP? [root@desktop etc]# dig +short myDomain.com 11.22.33.444 [root@desktop etc]# nslookup www.myDomain.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@desktop etc]# dig myDomain.com ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 <<>> myDomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 13822 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myDomain.com. IN A ;; ANSWER SECTION: myDomain.com. 16031 IN A 11.22.33.444 ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Oct 21 04:36:52 2013 ;; MSG SIZE rcvd: 44 [root@desktop etc]# [root@laptop ~]# dig +short myDomain.com 55.66.77.888 [root@laptop ~]# nslookup www.myDomain.com Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@laptop ~]#

  Read the article

• Why subnet mask for IP 10.0.1.4 is 255.255.255.0?

  - by Rohit Kandhal

  Well I'm not sure whether I'm missing something here. But all I've read is that if first octet of IP is within 0 - 127 then it is categorized as Class A subnet and correspondingly Subnet Mask for this is 255.0.0.0 but when I connect my system to Apple airport then my system gets IP as 10.0.1.4 however subnet mask is 255.255.255.0 not 255.0.0.0. Please explain what I'm missing here. If there is something like for apple router subnet mask is calculated on some different flags then please let me know.

  Read the article

• Multicast doesn't seem to be working on RHEL 5.5

  - by NullUser

  I'm trying to install Oracle Grid Infrastructure on two machines. Their documentation states You must enable multicasting for the cluster on the IP address subnet ranges 224.0.0.0/24 and 230.0.1.0/24 So I ran: route add -net 224.0.0.0/24 dev eth2 route add -net 230.0.1.0/24 dev eth2 route -n produces: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 230.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 224.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 # and others An ifconfig eth2 shows, among other things, UP BROADCAST RUNNING MULTICAST. However, when I run their multicast test utility, it fails me: Test for Multicast address 230.0.1.0 Sep 3 19:40:39 | Multicast Failed for eth2 using address 230.0.1.0:42000 Test for Multicast address 224.0.0.251 Sep 3 19:41:10 | Multicast Failed for eth2 using address 224.0.0.251:42001 What am I doing wrong?

  Read the article

• Windows Server 2008 network speed slow, Xen 3.4.3 HVM ISO

  - by Elliot.Bradshaw

  I've setup a VM running Windows Server 2008 on a host node running Xen 3.4.3-5 and the following kernel: 2.6.18-308.1.1.el5xen #1 SMP Wed Mar 7 05:38:01 EST 2012 i686 i686 i386 GNU/Linux The network speed on the VM is very slow--using the online speed tests I can only get it up to 8-9mbps. The line is 100mbps burstable and the host node has no problem achieving those speeds. If it setup a VM running CentOS, it too has no problems achieving those speeds. I've done some pretty exhaustive troubleshooting, but nothing has helped: New VM installations of Win2k8 do have the same network problem. Upgrading to most recent kernel-xen did not help (2.6.18-308.1.1.el5xen). Upgrading from xen 3.4.0 to xen 3.4.3-5 did not help. Disabling Windows firewall, etc did not help. Changing network card device config from auto negotiation to manually be 100mbps full duplex did not help. Changing the network receive buffer packet size did not help (tried all combos from 64k to 8k). At this point I'm pretty much out of ideas--any help would be appreciated!

  Read the article

• What is Allow multicast from Broadband Network?

  - by PeanutsMonkey

  If a wireless modem router has the option Allow multicast from Broadband Network, what does this mean exactly? What risks are there to leaving it enabled and why would you have it enabled? I understand that a broadcast is sending a packet to every device on the network and a multicast is send a packet to a specified set of addresses. A multicast packet can cross routers whereas a broadcast cannot although I don't quite understand how these "set of addresses are specified"

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >