Search Results

Search found 11772 results on 471 pages for 'fit pc'.

Page 91/471 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • A Duplicate name exists on the network

    - by Adam
    Recently we changed out office IT structure from having a dedicated server to be the DC, a dedicated server for the exchange etc... (Each running Windows Server 2003 R2) Now we have a single server running Windows SBS 2008 and created a new domain (with a different domain name) We then changed every PC so it connected to the new domain and renamed every PC with a new naming structure. After I had done this, we were getting several PCs that would get the following message just before the login screen (Alt+Ctrl+Del Screen) A Duplicate name exists on the network I have checked the ADUC and have removed the trouble PCs from the list and renamed each PC and changed the SID before connecting back onto the domain but still getting this message. I have tried everything that i can think of but still getting the problem. Any help would be greatly appreticated.

    Read the article

  • Options not available anymore in my Samsung 932bw lcd

    - by Sávio Mendes
    I think a friend messed up something in my monitor. I left him playing a game and when i came back, i noticed that the brightness was very high. I tried to change it but i couldn't, brithness, contrast, color warm and a few other options are marked as "not available" (he probably adjusted the brightness and changed something else too, that it's causing this thing). I updated the monitor driver, the vcard driver, plugged the monitor in other pc (I'm connected through dvi, but in the other pc i plugged through rgb) but nothing fixed it. Is there someway to force reset all the options or something like that to fix this? (I'm running Win7 RC1 but I don't think that it has something to do with it, it was working perfectly until he messed it up, and the other pc where I plugged it, runs winxp and the problem occurs too. And it doens't look like a the monitor is broken, it works like it always did, just these options are marked "not available" now...)

    Read the article

  • Ram not working in dual dynamic paging mode

    - by Robin Agrahari
    My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

    Read the article

  • always need administrator password...even my user and password is correct.. i cannot log in

    - by sulit09
    why the computer always need administrator password. when i change all the setting of my computer, all around ..... and when i log in my administrator password... still not working even it is correct....password....and user..... and this pc is connected to domain.. but i try to other pc . to login all also using windows administrator its open..... what is the problem itry run cmd as administrator need administrator password.....again.. , i try to open the properties of network need administrator passpowrd..again how to solve this problem my new pc is windows 7 .

    Read the article

  • Why can't I open programs after watching youtube videos for a while?

    - by manjivsanotsu
    I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

    Read the article

  • Using a Token-ring network card instead of a router (?)

    - by John
    I have cable, and the modem only has 1 network plug-in. They said I could buy my own router if I wanted to hook up two computers to it. I have an IBM Turbo 16/4 Token-Ring PC Card 2, which was in the laptop when I bought it, and the laptop also has the typical network plug (not a PC Card). Is there a way I could run the laptop as a server, and plug my desktop into the laptop, so they both have internet without my having to buy a router? (I realize routers are as cheap as $30.) Both computers run Windows XP Pro SP3. (I also have an 10/100 Etherjet Cardbus card (PC Card)). Thanks.

    Read the article

  • Trouble loading an ISO

    - by crocyson
    I've created a boot disk and ISO image with paragon. I boot up the Virtual pc with the disk in and I get to my recovery page. When I am supposed to select an ISO image? My Virtual PC doesn't acknowledge any of my physical hard drives on my host PC. I've also tried copy/paste the files into my datastore and they do not show up. I've tried the option during the set up to start with the ISO but again I am not able to browse to my external hard drive that I have stored the ISO on. VMWare will acknowledge it and say that it is connected but I can't browse to it. Am I doing something wrong? I created the back up disk and ISO image on the external with paragon.

    Read the article

  • can I connect two modems and comunicate on two side

    - by GongT
    I just wondering how modems work. I know the process of "modulation" and "demodulation". So I wanto know is "demodulation" are simple revese of "modulation" in real world. The PC can got an IP address when connect as type 1 What will happen when I connect them like type 2? type 1 : [PC] ================= [router] type 2 : [PC] === [m] ------- [m] === [router] [m] : modem(exactly same) === : Ethernet cable --- : DSL cable (phone line, maybe optical fiber, or something else?) ISP has a large number of model, Is them same thing as the one in my home(but with diffrent size/speed/price...etc)? Or it's completely different thing?

    Read the article

  • Sharing a Win7 Mappable Network Drive in Server 2008 R2

    - by Jason
    I have a ghetto windows server 2008 r2 server that I basically run as a file server. I would like to create a share that can be mapped as a network drive by a Windows 7 Pro PC. How can I do this? I've gathered that I probably need to setup a VPN network on my Server 2008 R2 box and then grant my Win7 PC access. Is there anything else I am overlooking or is there a better way to do this? I basically just want to be able to edit xml files on my Win7 PC without having to ftp them back and forth.

    Read the article

  • A GFX card with two DVI and one HDMI with audio?

    - by TomaszRykala
    I haven't upgraded my PC for a while nor kept up to date with pc hardware since 2007, but have recently come up with a requirement and I am wondering if I can solve it! Are there any graphics cards out there that have two DVIs and one HDMI output, with the HDMI supporting sound over it? Basically, I've got a two PC monitor setup, and both monitors are connected to the two DVI's of my GTX9800+. I want to upgrade my card to say, GTX 460, but can't find if there is such with two DVIs (for my monitors) and one HDMI with audio (for my TV). So I am wondering, if such solution possible at all? I noticed that there are some cards out there with two DVI's and one mini-HDMI, but they all say 'HDMI Output Yes x 1 (via DVI to HDMI adaptor x 1 )', which probably means that because of the DVI element, the audio won't work. Is this true? Such card is an exmaple: http://uk.asus.com/Graphics_Cards/NVIDIA_Series/ENGTX460_DirectCU2DI1GD5/#specifications Many thanks for your help!

    Read the article

  • Manage 2 displays remotely

    - by neurino
    I have a pc with a nVidia Quadro graphic card. The card has 2 DisplayPort outs where 2 40" Full HD TV are connected. I need to run 2 separate fullscreen videos, one each display. The problem is displays are far from the pc station and I cannot control them from there. I tried with a remote desktop connection but when I connect screen 1 shows login and screen 2 simply blackens (I'm logged off). The pc, an HP, also has his native graphics card still installed it would be nice if I could connect there a 15" monitor with the desktop on and use the TVs only as secondary where I can send fullscreen videos. Any clue?

    Read the article

  • IIS: Can't access my site

    - by Markus
    Hi I have Windows 7 Professional. With IIS 7 or 7.5 I have set up a little website. So far all works fine on http://Localhost:80 - I can see the site. Then I set up the firewall so port 80 is open. My Router routes TCP:80 to my pc. But from my second pc I cant access the site. I can ping the other pc but why I can't access the page through the LAN? Please help!

    Read the article

  • Easiest (free) way to get VM hosting Windows OS, on Windows 7 Ultimate 64bit

    - by John
    I'm a software developer and my workstation is running Win7 Ultimate, 64bit. I want to run a virtual PC on which I can deploy and run the web-software I create, as a virtual web-server PC. I want the VM to also be Windows as that's what I know, the version isn't too important but on that PC I want to run things like MySQL, TomCat, etc. I see VMWare make 'Player', also I see VirtualBox and I know MS also have solutions too, which I've heard good things about. Does it make much difference which I use as far as creating & using VMs? Or are they all pretty similar?

    Read the article

  • Printer on different network(IP range), can i print to it?

    - by John
    Heres my situation, client PC is on the same network as the printer to start with: 192.168.1.X Thats fine and printing is fine, however our clients are required to connect to the VPN using the installed cisco client - this creates a virtual adapter and now the PC is connected to a 10.0.0.X IP range and can no longer see the printer, thus my problem! If I do an IPCONFIG/ALL the PC still has the 192.168.1.X address but it I can't ping anything on it. Is it possible to use both IP ranges at the same time?

    Read the article

  • ASP.Net: Insert null DateTime

    - by Vinzcent
    Hey I'am using a SQLDatasource in combination with a Formview. When I want to insert or update a DateTime that has no value, I always get an error. How do you insert a DateTime null. My SQLDataSource <asp:SqlDataSource ID="sqldsDetailOrder" runat="server" ConnectionString="<%$ ConnectionStrings:csBookStore %>" SelectCommand="SELECT 'AUTHOR' = tblAuthors.FIRSTNAME + ' ' + tblAuthors.LASTNAME, tblBooks.*, tblGenres.*, tblLanguages.*, tblOrders.* FROM tblAuthors INNER JOIN tblBooks ON tblAuthors.AUTHOR_ID = tblBooks.AUTHOR_ID INNER JOIN tblGenres ON tblBooks.GENRE_ID = tblGenres.GENRE_ID INNER JOIN tblLanguages ON tblBooks.LANG_ID = tblLanguages.LANG_ID INNER JOIN tblOrders ON tblBooks.BOOK_ID = tblOrders.BOOK_ID WHERE tblOrders.ID = @ID" DeleteCommand="DELETE FROM [tblOrders] WHERE [ID] = @ID" InsertCommand="INSERT INTO [tblOrders] ([NAME], [ADDRESS], [CITY], [PC], [DATE], [BOOK_ID], [COUNT], [AMOUNT], [DELIVERED], [DDATE], [PAID], [PDATE]) VALUES (@NAME, @ADDRESS, @CITY, @PC, @DATE, @BOOK_ID, @COUNT, @AMOUNT, @DELIVERED, @DDATE, @PAID, @PDATE)" UpdateCommand="UPDATE [tblOrders] SET [NAME] = @NAME, [ADDRESS] = @ADDRESS, [CITY] = @CITY, [PC] = @PC, [DATE] = @DATE, [BOOK_ID] = @BOOK_ID, [COUNT] = @COUNT, [AMOUNT] = @AMOUNT, [DELIVERED] = @DELIVERED, [DDATE] = @DDATE, [PAID] = @PAID, [PDATE] = @PDATE WHERE [ID] = @ID"> <SelectParameters> <asp:ControlParameter ControlID="gvOrdersAdmin" Name="ID" PropertyName="SelectedValue" Type="Int32" /> </SelectParameters> <DeleteParameters> <asp:Parameter Name="ID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="NAME" Type="String" /> <asp:Parameter Name="ADDRESS" Type="String" /> <asp:Parameter Name="CITY" Type="String" /> <asp:Parameter Name="PC" Type="String" /> <asp:Parameter DbType="DateTime" Name="DATE" /> <asp:Parameter Name="BOOK_ID" Type="Int32" /> <asp:Parameter Name="COUNT" Type="Int32" /> <asp:Parameter Name="AMOUNT" Type="Decimal" /> <asp:Parameter Name="DELIVERED" Type="Boolean" /> <asp:Parameter DbType="DateTime" Name="DDATE" /> <asp:Parameter Name="PAID" Type="Boolean" /> <asp:Parameter DbType="DateTime" Name="PDATE" /> <asp:Parameter Name="ID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="NAME" Type="String" /> <asp:Parameter Name="ADDRESS" Type="String" /> <asp:Parameter Name="CITY" Type="String" /> <asp:Parameter Name="PC" Type="String" /> <asp:Parameter DbType="DateTime" Name="DATE" /> <asp:Parameter Name="BOOK_ID" Type="Int32" /> <asp:Parameter Name="COUNT" Type="Int32" /> <asp:Parameter Name="AMOUNT" Type="Decimal" /> <asp:Parameter Name="DELIVERED" Type="Boolean" /> <asp:Parameter DbType="DateTime?" Name="DDATE" /> <asp:Parameter Name="PAID" Type="Boolean" /> <asp:Parameter DbType="DateTime" Name="PDATE" /> </InsertParameters> </asp:SqlDataSource> Thanks Vincent

    Read the article

  • Intel Corporation Ethernet Connection does not start properly

    - by Oscar Alejos
    I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

    Read the article

  • Boot failure on installation from a burned iso image

    - by jdamae
    I'm encountering boot failure while trying to install a Linux distro from a CD. I'm using an older PC; here are its specs: HP Pavilion a255c 2.66GHz CPU, 512MB RAM with a BIOS revision of 6/30/2003 I reclaimed an older drive (Seagate ST340810A) that seems to be working, as it's recognized in the BIOS (auto-detected). So this is not the original HDD, but a replacement. I downloaded a mini.iso of Ubuntu 10.10 that I want to install, and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM]. I disabled devices 2-4 so I can just force it to read first from the CD-ROM. This old PC also has a separate CD writer which is a Sec.Slave. The Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned Linux CD. With these settings I cannot get it to boot. I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" when I start the pc with the cd (burned iso image). Would I be able to boot off a usb flash drive? Would that work?

    Read the article

  • Get the MakeUseOf eBook Guide to Speeding Up Windows for Free

    - by ETC
    Our friends over at MakeUseOf.com have released yet another eBook in their series of Guides to, well, just about everything. This one gives you some tips for speeding up your Windows PC. The guide has a ton of different tips, and while I wouldn’t necessarily say you follow every single tip to the letter (since everybody’s setup is different), it does give you lots of great ideas for speeding up your PC, as well as links to resources, and instructions for how to perform various cleanup tasks. The best tips? Make sure to keep your PC crapware-free, upgrade your RAM if you’re low, scan for viruses, and run some type of disk cleanup on a regular basis. Download the MakeUseOf Windows on Speed Guide (PDF) [Direct Download Link] Windows on Speed [MakeUseOf] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

    Read the article

  • Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now.

    - by The Geek
    Microsoft’s Security Essentials has been our favorite anti-malware application for a while—it’s free, unobtrusive, and it doesn’t slow your PC down, but now it’s even better with the new 2.0 release, which adds network filtering, heuristic protection, and more. Just to be clear and direct with you: we absolutely recommend Microsoft Security Essentials as your anti-malware / anti-virus utility over any other option—and how can you argue? It’s totally free! New Features in 2.0 Here’s all of the new features in the latest release, which make it even more of a must-download: Network Traffic Inspection integrates into the network system and monitors the traffic at a low level without slowing down your PC, so it can actually detect threats before they get to your PC.   Internet Explorer Integration blocks malicious scripts before IE even starts running them—clearly a big security advantage.  Heuristic Scanning Engine finds malware that hasn’t been previously detected by scanning for certain types of attacks. This provides even more protection than just through virus definitions.   These new features make MSE on par with other anti-malware applications, especially the heuristic scanning, which has been the only complaint that anybody could make against MSE in the past—but now it has it Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation

    Read the article

  • A list of pros and cons to giving developers “Local Admin” privileges to their machines? [closed]

    - by Boden
    Possible Duplicate: Is local “User” rights enough or do developers need Local Administrator or Power User while coding? I currently work for a large utilities company which currently does not grant “Local Admin” access to developers. This is causing a lot of grief as anything that requires elevated privileges needs to be done by the Desktop Support/Server Teams. In some cases this can take several days and requires our developers to have to show why they need this access. I personally think that all developers should have local administration rights and are currently fighting with management to achieve this but I would like to know what other people think about this. To achieve this I would like to hear what people believe are the pros and cons of letting developers have local admin access to their machines. Here are some I have come up with: Pros Loss time is keep low as developers can resolve issues that would normally require Local Admin Evaluation of tools and software are possible to improve productivity Desktop support time not wasted installing services and software on developers PC Cons Developers install software on local PC that could be malicious to others or inappropriate in a business environment Desktop Support required to support a PC that is not the norm Development done with admin access that then fails when promoted to another environment that does not have the same access level

    Read the article

  • High CPU usage compared to WinXP. Common aps and actions use 100% CPU cycles

    - by Jopower
    I'm running Lubunto 14.04.1 LTS. PC is a 2004 HP ze4200 laptop: 1.8 ghz Celeron M with 1 gb RAM and 80 gb drive. Was running fine on WinXP SP3 and I cleaned the drive off to test Lubuntu 14 LTS. No anti-virus is installed yet. I enabled the CPU resource monitor to see how various programs drag the OS. Using Firefox 31 online right now, I see doing basic functions like openning a new tab and scrolling down a page are using 100% CPU time, ocassionally for 10-30 seconds. In fact some pretty basic aps like Leafnote hit 100% for a second. Wordpad never did that. Lubuntu Software Center locks things up at 100% for 10 seconds. Just typing here shows a 60-80% spike every character. Running the mouse around the screen for 10 seconds results in a sustained 100% load during that time. Right now, if I let the PC rest just idling Firefox and not doing anything with it, CPU use bounces from 20-40% all by itself. WinXP idles at 2-10% and it's considered not good for it to be above 20%... something odd must be happening. Sure, XP will give similar higher CPU cycles with program use, but it's not locking and slogging like this. Lubuntu is supposed to be a light OS and by memory usage it is and I'm happy since this is an old PC maxed for memory upgrades. However, being used to doing some tuning and wary of abnormalities going on in the background, the CPU use indicates things going on that I want to know about and perhaps apply a tweek or two. Recommendations are appreciated. And this 300 point "new tags" restriction bites!

    Read the article

  • "wrong fs type, bad option, bad superblock" error while mounting FAT Drives

    - by cshubhamrao
    I am unable to mount any fat32 or fat16 formatted usb disks under Ubuntu 13.10. The thing here to note is that it is happening only with fat formatted Disks. ntfs, ext formatted external usb disks work well (I tried formatting the same with ext4 and it worked) While mounting via nautilus: Error while mounting from terminal: root@shubham-pc:~# mount -t vfat /dev/sdc1 /media/shubham/n mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so As suggested by the error: Output from dmesg | tail root@shubham-pc:~# dmesg | tail [ 3545.482598] scsi8 : usb-storage 1-1:1.0 [ 3546.481530] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5 [ 3546.482373] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3546.483758] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3546.485254] sd 8:0:0:0: [sdc] Write Protect is off [ 3546.485262] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3546.488314] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3546.499820] sdc: sdc1 [ 3546.503388] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3547.273396] FAT-fs (sdc1): IO charset iso8859-1 not found Output from fsck.vfat: root@shubham-pc:~# fsck.vfat /dev/sdc1 dosfsck 3.0.16, 01 Mar 2013, FAT32, LFN /dev/sdc1: 1 files, 1/1949978 clusters All normal Tried re-creating the whole partition table and then formatting as fat32 but to no avail so the possibility of corrupted drive is ruled out. Tried the same with around 4 Disks or so and all have the same things

    Read the article

  • Problems Dual Boot

    - by user104108
    A few months I decided to install Ubuntu 12.04 on my PC alongside with my Windows 7 partition. In order to do that and avoid any mistake, I followed the steps of these tutorial: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/2/ Everything was going well until I decided to update to the 12.10 realese. I don't know what happened, but after I updated my Ubuntu, it stoped working, it didn't even launched, when I turned on my pc and choose to run "Ubuntu 12.04" on the Grub Screen, a weird messaged appeared. Well, so I decided to install the Ubuntu 12.10 and forget about the 12.04 partition, no problem. I erased the partitions used for the Ubuntu 12.04 with EaseUS partition Manager. However, when I start my PC, there is still the option of "Ubuntu 12.04" to chose, is that bad? And what about now, can I use the Windows Installer of Ubuntu ( http://www.ubuntu.com/download/help/install-ubuntu-with-windows ) to install the Ubuntu 12.10 ? What should I do to have Ubuntu 12.10 and Windows 7 in dual boot again? Thanks; Thales.

    Read the article

  • How to configure a MInimal Ubuntu installation?

    - by Uri Herrera
    I recently re installed Ubuntu using the mini.iso, but much to my dismay the mini.iso is not configured the same way as the Ubuntu desktop ISO some "problems" I'm facing such as: An Installation using the regular Ubuntu CD recognizes my active network connections in Network Manager, Installing with the mini.iso gives me a working connection however no connections are "active" in Network Manager displaying the message "The system network services are not compatible with this version." In a regular Ubuntu install connecting an Android phone to the PC mounts the phone's internal memory and sd card if present, Using the mini.iso the phone is detected as it appears with the command lsusb but it's not mounted and can't be mounted. In the same regards using the phone to tether it's connection to the PC via USB, the phone is connected to my (wifi) IN the regular Ubuntu install the phone is recognized as a networking device and is used as connection usb0, while in the mini.iso nothing happens, and trying to add the connection to /etc/network/interfaces results in the OS crashing. Just to make sure It wasn't a matter of my user not having the correct permissions or a lack of "groups", I've checked with an Ubuntu VM and the groups are the same, the networking files are the same, and the packages (except those of ubuntu-desktop such as Unity, Firefox, LibreOffice, and other non-essential software) are Installed in my PC, so what else is there to look for?. I'm sure I'm missing something, and I'd prefer not to install Ubuntu again, using the regular cd. How can I manage to get the same behaviour/configuration without reinstalling ?

    Read the article

  • Stop Your Mouse from Waking Up Your Windows 7 Computer

    - by The Geek
    If you use Sleep Mode on your PC, have you ever noticed that moving your mouse will wake the computer from sleep mode? If you would prefer to only have the PC wake up when you hit a key instead, there’s a simple tweak. Just type Mouse into the start menu search box, or the Control Panel search box, and then open up the Mouse Properties panel. Find the Hardware tab, select your mouse in the list, and then click the Properties button. You’ll have to click the “Change settings” button before you can see the Power Management tab… And now, you can uncheck the box from “Allow this device to wake the computer”. That’s all there is to it. Similar Articles Productive Geek Tips Stop the Mouse From Waking Up Your Computer from Sleep ModeFix "Sleep Mode Randomly Waking Up" Issue in Windows VistaTemporarily Disable Windows Update’s Automatic Reboot in Win7 or VistaDisable Aero Snap (the Mouse Drag Window Arranging Feature in Windows 7)New Year’s Resolutions: Use Your Computer as an Alarm Clock the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >